You are not logged in.
- Topics: Active | Unanswered
#6701 2014-09-11 08:13:58
- Astroarch
- Member
- From: Germany
- Registered: 2014-03-21
- Posts: 85
Re: The AMD/ATI Bar & Grill
Hello guys,
in my laptop I cannot upgrade the system because ATI driver requires xorg-server no more than 1.15.
How can I exclude this package and update the rest?
Thanks!
Offline
#6702 2014-09-11 08:21:13
- ChemBro
- Member
- Registered: 2008-10-22
- Posts: 703
Re: The AMD/ATI Bar & Grill
That is actually Arch Linux basic knowledge, what you are asking for. For how to use Pacman, I recommend to read the Wiki article on Pacman. For the 1.15 problem: https://wiki.archlinux.org/index.php/Ca … positories though you only can use that, after you know how to handle repos in Pacman.
Offline
#6703 2014-09-12 19:07:38
- Vi0L0
- Member
- From: Poland
- Registered: 2009-06-24
- Posts: 1,349
- Website
Re: The AMD/ATI Bar & Grill
New catalyst versioned as 14.201-0ubuntu1 (prepared for Ubuntu 14.10) works fine on xorg-server 1.16.
It was a nice surprise to test it after getting back from work's traveling :-)
I tested:
games: dota2, l4d2, serious sam 2, civilization v, tf2
video: mplayer (vaapi), xbmc (xvba - latest xbmc version before xvba was dropped)
opengl benchs: heaven, valley
basic opencl apps
catalyst-test and catalyst-test-pxp @ AUR were already updated, soon I should update [catalyst] repo.
edit: ok, repo is now up to date, archive repo is called [catalyst-14.6-beta1-jul11]
hippieben wrote:
Vi0L0 wrote:@hippieben:
lately also I noticed problems with stability. They were probably caused by vaapi, but I had no time to investigate closer. I should be able to look at it this weekendcool, let me know what you come up with.
I think the problems in instability were caused by 3.17 rc kernel because it was happening only when I was compiling on a (tmpfs) ramdisk while watching vaapi videos. Gotta look closer at this, only three problems: its hard to reproduce, nothing in logs (i need to enable some hc loging in kernel) and I dont have much time these days 
Last edited by Vi0L0 (2014-09-12 22:17:29)
Offline
#6704 2014-09-13 00:35:59
- hippieben
- Member
- Registered: 2013-10-27
- Posts: 218
Re: The AMD/ATI Bar & Grill
Vi0L0 wrote:
hippieben wrote:Vi0L0 wrote:@hippieben:
lately also I noticed problems with stability. They were probably caused by vaapi, but I had no time to investigate closer. I should be able to look at it this weekendcool, let me know what you come up with.
I think the problems in instability were caused by 3.17 rc kernel because it was happening only when I was compiling on a (tmpfs) ramdisk while watching vaapi videos. Gotta look closer at this, only three problems: its hard to reproduce, nothing in logs (i need to enable some hc loging in kernel) and I dont have much time these days
Thanks for the reply. I'm just going to update everything (the downgrade didn't actually solve the problem) and hope that it's a regression upstream and that it will be fixed in a later version of the kernel.
Offline
#6705 2014-09-13 15:20:53
- revberaldo
- Member
- From: Campinas, Brazil
- Registered: 2009-09-18
- Posts: 49
- Website
Re: The AMD/ATI Bar & Grill
I upgraded to the new catalyst version (I'm using the unofficial repositories) and I can confirm it's working with Xorg 1.14. I tried Xorg 1.15 and it didn't work, but I didn't get a log file.
With Xorg 1.16 it didn't work either. Here's the output of cat ~/.local/share/xorg/Xorg.0.log:
[ 27.144]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 27.144] X Protocol Version 11, Revision 0
[ 27.144] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 27.144] Current Operating System: Linux derpy 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 27.144] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet splash
[ 27.144] Build Date: 31 July 2014 11:53:19AM
[ 27.144]
[ 27.144] Current version of pixman: 0.32.6
[ 27.144] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.144] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.144] (==) Log file: "/home/rberaldo/.local/share/xorg/Xorg.0.log", Time: Sat Sep 13 11:59:11 2014
[ 27.152] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.152] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.152] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.156] (==) ServerLayout "aticonfig Layout"
[ 27.156] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 27.156] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 27.156] (**) | |-->Device "aticonfig-Device[0]-0"
[ 27.156] (==) Automatically adding devices
[ 27.156] (==) Automatically enabling devices
[ 27.156] (==) Automatically adding GPU devices
[ 27.222] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.222] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 27.222] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.223] (II) Loader magic: 0x818d80
[ 27.223] (II) Module ABI versions:
[ 27.223] X.Org ANSI C Emulation: 0.4
[ 27.223] X.Org Video Driver: 18.0
[ 27.223] X.Org XInput driver : 21.0
[ 27.223] X.Org Server Extension : 8.0
[ 27.224] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 27.225] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.225] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 27.226] (--) PCI:*(0:0:2:0) 8086:0a16:1028:0640 rev 11, Mem @ 0xb0400000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[ 27.226] (--) PCI: (0:3:0:0) 1002:6900:1028:0640 rev 0, Mem @ 0xa0000000/268435456, 0xb0000000/2097152, 0xb0900000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 27.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27.226] (II) "glx" will be loaded by default.
[ 27.226] (II) LoadModule: "glx"
[ 27.232] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[ 27.236] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 27.236] compiled for 6.9.0, module version = 1.0.0
[ 27.236] (II) LoadModule: "fglrx"
[ 27.236] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 27.370] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 27.370] compiled for 1.4.99.906, module version = 14.20.7
[ 27.370] Module class: X.Org Video Driver
[ 27.372] (II) Loading sub module "fglrxdrm"
[ 27.372] (II) LoadModule: "fglrxdrm"
[ 27.372] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 27.375] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 27.375] compiled for 1.4.99.906, module version = 14.20.7
[ 27.375] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 27.375] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002
[ 27.375] (II) AMD Proprietary Linux Driver Build Date: Sep 2 2014 10:14:55
[ 27.375] (++) using VT number 1
[ 27.375] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 27.375] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 27.375] (WW) Falling back to old probe method for fglrx
[ 27.383] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 27.384] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[ 27.385] ukiDynamicMajor: found major device number 250
[ 27.385] ukiDynamicMajor: found major device number 250
[ 27.385] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[ 27.385] ukiOpenDevice: node name is /dev/ati/card0
[ 27.468] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.468] ukiOpenDevice: node name is /dev/ati/card1
[ 27.469] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.469] ukiOpenDevice: node name is /dev/ati/card2
[ 27.470] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.470] ukiOpenDevice: node name is /dev/ati/card3
[ 27.471] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.471] ukiOpenDevice: node name is /dev/ati/card4
[ 27.471] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.471] ukiOpenDevice: node name is /dev/ati/card5
[ 27.472] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.472] ukiOpenDevice: node name is /dev/ati/card6
[ 27.473] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.473] ukiOpenDevice: node name is /dev/ati/card7
[ 27.474] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.474] ukiOpenDevice: node name is /dev/ati/card8
[ 27.474] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.474] ukiOpenDevice: node name is /dev/ati/card9
[ 27.475] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.475] ukiOpenDevice: node name is /dev/ati/card10
[ 27.476] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.476] ukiOpenDevice: node name is /dev/ati/card11
[ 27.476] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.476] ukiOpenDevice: node name is /dev/ati/card12
[ 27.477] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.477] ukiOpenDevice: node name is /dev/ati/card13
[ 27.478] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.478] ukiOpenDevice: node name is /dev/ati/card14
[ 27.479] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.479] ukiOpenDevice: node name is /dev/ati/card15
[ 27.479] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.481] (--) Chipset Supported AMD Graphics Processor (0x6900) found
[ 27.482] (II) fglrx(0): pEnt->device->identifier=0x184d8f0
[ 27.482] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 27.482] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 27.483] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 27.483] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 27.483] (==) fglrx(0): Default visual is TrueColor
[ 27.483] (**) fglrx(0): Option "DPMS" "true"
[ 27.483] (==) fglrx(0): RGB weight 888
[ 27.483] (II) fglrx(0): Using 8 bits per RGB
[ 27.483] (==) fglrx(0): Buffer Tiling is ON
[ 27.484] (II) Loading sub module "fglrxdrm"
[ 27.484] (II) LoadModule: "fglrxdrm"
[ 27.484] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 27.484] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 27.484] compiled for 1.4.99.906, module version = 14.20.7
[ 27.484] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[ 27.485] ukiDynamicMajor: found major device number 250
[ 27.485] ukiDynamicMajor: found major device number 250
[ 27.485] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[ 27.485] ukiOpenDevice: node name is /dev/ati/card0
[ 27.486] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.486] ukiOpenDevice: node name is /dev/ati/card1
[ 27.487] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.487] ukiOpenDevice: node name is /dev/ati/card2
[ 27.487] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.487] ukiOpenDevice: node name is /dev/ati/card3
[ 27.488] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.488] ukiOpenDevice: node name is /dev/ati/card4
[ 27.489] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.489] ukiOpenDevice: node name is /dev/ati/card5
[ 27.489] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.489] ukiOpenDevice: node name is /dev/ati/card6
[ 27.490] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.490] ukiOpenDevice: node name is /dev/ati/card7
[ 27.491] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.491] ukiOpenDevice: node name is /dev/ati/card8
[ 27.492] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.492] ukiOpenDevice: node name is /dev/ati/card9
[ 27.492] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.492] ukiOpenDevice: node name is /dev/ati/card10
[ 27.493] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.493] ukiOpenDevice: node name is /dev/ati/card11
[ 27.494] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.494] ukiOpenDevice: node name is /dev/ati/card12
[ 27.495] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.495] ukiOpenDevice: node name is /dev/ati/card13
[ 27.495] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.495] ukiOpenDevice: node name is /dev/ati/card14
[ 27.496] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.496] ukiOpenDevice: node name is /dev/ati/card15
[ 27.497] ukiOpenByBusid: ukiOpenMinor returns -1003
[ 27.497] (**) fglrx(0): NoAccel = NO
[ 27.497] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 27.497] (--) fglrx(0): Chipset: "MESO XT (6900)" (Chipset = 0x6900)
[ 27.497] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x0640)
[ 27.497] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 27.497] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[ 27.497] (--) fglrx(0): MMIO registers at 0xb0900000
[ 27.497] (--) fglrx(0): I/O port at 0x00003000
[ 27.497] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 27.497] (EE) fglrx(0): failed to map MMIO register space!(EE) fglrx(0): MapMMIO failed
[ 27.497] (EE) fglrx(0): PreInitAdapter failed
[ 27.497] (EE) fglrx(0): PreInit failed
[ 27.497] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === end
[ 27.497] (II) UnloadModule: "fglrx"
[ 27.497] (II) UnloadSubModule: "fglrxdrm"
[ 27.497] (II) Unloading fglrxdrm
[ 27.497] (II) UnloadSubModule: "fglrxdrm"
[ 27.497] (EE) Screen(s) found, but none have a usable configuration.
[ 27.497] (EE)
Fatal server error:
[ 27.497] (EE) no screens found(EE)
[ 27.497] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 27.497] (EE) Please also check the log file at "/home/rberaldo/.local/share/xorg/Xorg.0.log" for additional information.
[ 27.497] (EE)
[ 27.502] (EE) Server terminated with error (1). Closing log file.Just in case the driver didn't get rebuilt, I ran catalyst_build_module and modprobe fglrx, but that didn't solve it either.
EDIT: my kernel version is 3.16.2-1-ARCH
Last edited by revberaldo (2014-09-13 15:21:51)
Offline
#6706 2014-09-13 17:42:55
- retr0virus
- Member
- From: germany
- Registered: 2011-08-20
- Posts: 4
Re: The AMD/ATI Bar & Grill
With the new catalyst-test 14.9-10 my X screen hangs. The background is displayed, the mouse cursor is displayed but no keyboard-shortcuts work and the mouse won't move.
It does not do anything when pressing Ctrl+Print+K, Ctrl+Alt+F1/F2/... but it reboots when using REISUB. So the keyboard itself seems to be recognised.
I am using openbox 3.5.2-6, linux 3.16.2-1, xorg-server 1.16.0-6. Previous I had forced to use the 1.15 xorg-server and the catalyst-test 14.6-12.
I was starting X with a simple "xinit" after logging in.
With 1.16 I have to use "xinit -- /etc/X11/xinit/xserverrc" to start X on my netbook and on my desktop with the open source driver, otherwise no screens are found.
With the catalyst-test the simple "xinit" command seems to be enough - I did not try to add the xserverrc reference.
I tried to do a new "aticonfig --initial=dual-head" after removing the xorg.conf, but the result was the same.
With catalyst-test 14.9-10 the Xorg.0.log still is created at /var/log/ instead of .local/share/xorg/. With the open source driver it is created in the latter directory
.xinitrc:
#!/bin/sh
# ~/.xinitrc
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# keymap
setxkbmap de
# mouse acceleration
xset m 5/4 0
# notification-daemon
/usr/bin/dunst &
# openbox-session
exec openbox-sessionxorg.conf:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "amdcccle-Screen[1]-1"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "0-DFP6"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1280x1024"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-DFP7"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1200"
Option "TargetRefresh" "60"
Option "Position" "1280 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "Monitor-DFP6" "0-DFP6"
Option "Monitor-DFP7" "0-DFP7"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-1"
Driver "fglrx"
Option "Monitor-DFP7" "0-DFP7"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Virtual 3200 3200
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-1"
Device "amdcccle-Device[1]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionXorg.0.log:
[ 437.769]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 437.774] X Protocol Version 11, Revision 0
[ 437.774] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 437.775] Current Operating System: Linux vyrRechner 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 437.775] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c0af15f3-877a-4929-9c55-657c5bb474cd rw quiet nomodeset
[ 437.776] Build Date: 31 July 2014 11:53:19AM
[ 437.777]
[ 437.777] Current version of pixman: 0.32.6
[ 437.778] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 437.778] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 437.781] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 13 17:57:22 2014
[ 437.828] (==) Using config file: "/etc/X11/xorg.conf"
[ 437.828] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 437.829] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 437.887] (==) ServerLayout "aticonfig Layout"
[ 437.887] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 437.887] (**) | |-->Monitor "<default monitor>"
[ 437.902] (**) | |-->Device "aticonfig-Device[0]-0"
[ 437.902] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 437.902] (**) |-->Screen "amdcccle-Screen[1]-1" (1)
[ 437.902] (**) | |-->Monitor "<default monitor>"
[ 437.902] (**) | |-->Device "amdcccle-Device[1]-1"
[ 437.902] (==) No monitor specified for screen "amdcccle-Screen[1]-1".
Using a default monitor configuration.
[ 437.902] (==) Automatically adding devices
[ 437.902] (==) Automatically enabling devices
[ 437.902] (==) Automatically adding GPU devices
[ 437.922] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 437.922] Entry deleted from font path.
[ 437.922] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 437.923] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 437.923] Entry deleted from font path.
[ 437.923] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 437.923] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 437.923] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 437.923] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 437.923] (II) Loader magic: 0x818d80
[ 437.923] (II) Module ABI versions:
[ 437.923] X.Org ANSI C Emulation: 0.4
[ 437.923] X.Org Video Driver: 18.0
[ 437.923] X.Org XInput driver : 21.0
[ 437.923] X.Org Server Extension : 8.0
[ 437.925] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 437.928] (--) PCI:*(0:1:0:0) 1002:6818:1043:042a rev 0, Mem @ 0xc0000000/268435456, 0xfea00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 437.928] (II) Open ACPI successful (/var/run/acpid.socket)
[ 437.928] (II) "glx" will be loaded by default.
[ 437.928] (II) LoadModule: "glx"
[ 438.097] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 438.109] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 438.109] compiled for 6.9.0, module version = 1.0.0
[ 438.109] (II) LoadModule: "fglrx"
[ 438.122] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 438.324] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 438.324] compiled for 1.4.99.906, module version = 14.20.7
[ 438.324] Module class: X.Org Video Driver
[ 438.330] (II) Loading sub module "fglrxdrm"
[ 438.330] (II) LoadModule: "fglrxdrm"
[ 438.330] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 438.333] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 438.333] compiled for 1.4.99.906, module version = 14.20.7
[ 438.333] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 438.333] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002
[ 438.333] (II) AMD Proprietary Linux Driver Build Date: Sep 2 2014 10:14:55
[ 438.333] (--) using VT number 2
[ 438.338] (WW) Falling back to old probe method for fglrx
[ 438.386] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 438.399] ukiDynamicMajor: found major device number 249
[ 438.399] ukiDynamicMajor: found major device number 249
[ 438.399] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 438.399] ukiOpenDevice: node name is /dev/ati/card0
[ 438.400] ukiOpenDevice: open result is 13, (OK)
[ 438.484] ukiOpenByBusid: ukiOpenMinor returns 13
[ 438.484] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 438.485] ukiDynamicMajor: found major device number 249
[ 438.485] ukiDynamicMajor: found major device number 249
[ 438.485] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 438.485] ukiOpenDevice: node name is /dev/ati/card0
[ 438.485] ukiOpenDevice: open result is 13, (OK)
[ 438.485] ukiOpenByBusid: ukiOpenMinor returns 13
[ 438.485] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 438.488] (--) Chipset Supported AMD Graphics Processor (0x6818) found
[ 438.488] (--) Chipset Supported AMD Graphics Processor (0x6818) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:2) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:10:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 438.489] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 438.490] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[ 438.490] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
[ 438.490] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 438.490] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 438.490] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 438.490] (II) fglrx(0): pEnt->device->identifier=0x19f4570
[ 438.490] (II) fglrx(1): pEnt->device->identifier=0x19f4570
[ 438.491] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[ 438.491] (II) Loading sub module "vgahw"
[ 438.491] (II) LoadModule: "vgahw"
[ 438.492] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 438.503] (II) Module vgahw: vendor="X.Org Foundation"
[ 438.503] compiled for 1.16.0, module version = 0.1.0
[ 438.503] ABI class: X.Org Video Driver, version 18.0
[ 438.504] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 438.504] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 438.504] (==) fglrx(0): Default visual is TrueColor
[ 438.504] (==) fglrx(0): RGB weight 888
[ 438.504] (II) fglrx(0): Using 8 bits per RGB
[ 438.504] (==) fglrx(0): Buffer Tiling is ON
[ 438.504] (II) Loading sub module "fglrxdrm"
[ 438.504] (II) LoadModule: "fglrxdrm"
[ 438.504] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 438.504] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 438.504] compiled for 1.4.99.906, module version = 14.20.7
[ 438.507] ukiDynamicMajor: found major device number 249
[ 438.507] ukiDynamicMajor: found major device number 249
[ 438.507] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 438.507] ukiOpenDevice: node name is /dev/ati/card0
[ 438.507] ukiOpenDevice: open result is 15, (OK)
[ 438.507] ukiOpenByBusid: ukiOpenMinor returns 15
[ 438.507] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 438.507] (**) fglrx(0): NoAccel = NO
[ 438.507] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 438.507] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series" (Chipset = 0x6818)
[ 438.507] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x042a)
[ 438.507] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 438.507] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 438.507] (--) fglrx(0): MMIO registers at 0xfea00000
[ 438.507] (--) fglrx(0): I/O port at 0x0000e000
[ 438.507] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 438.508] (II) fglrx(0): AC Adapter is used
[ 438.508] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 438.509] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 438.509] (II) fglrx(0): PCIE card detected
[ 438.509] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 438.509] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 438.509] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x80000000)
[ 438.509] (II) fglrx(0): RandR 1.2 support is enabled!
[ 438.509] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 438.509] (II) Loading sub module "fb"
[ 438.509] (II) LoadModule: "fb"
[ 438.509] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 438.525] (II) Module fb: vendor="X.Org Foundation"
[ 438.525] compiled for 1.16.0, module version = 1.0.0
[ 438.525] ABI class: X.Org ANSI C Emulation, version 0.4
[ 438.525] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 438.525] (II) Loading sub module "ddc"
[ 438.525] (II) LoadModule: "ddc"
[ 438.525] (II) Module "ddc" already built-in
[ 438.755] (II) fglrx(0): Output DFP1 has no monitor section
[ 438.755] (II) fglrx(0): Output DFP2 has no monitor section
[ 438.755] (II) fglrx(0): Output DFP3 has no monitor section
[ 438.755] (II) fglrx(0): Output DFP4 has no monitor section
[ 438.755] (II) fglrx(0): Output DFP5 has no monitor section
[ 438.756] (II) fglrx(0): Output DFP6 using monitor section 0-DFP6
[ 438.756] (**) fglrx(0): Option "PreferredMode" "1280x1024"
[ 438.756] (**) fglrx(0): Option "Position" "0 0"
[ 438.756] (**) fglrx(0): Option "Disable" "false"
[ 438.756] (**) fglrx(0): Option "Rotate" "normal"
[ 438.756] (**) fglrx(0): Option "TargetRefresh" "60"
[ 438.756] (II) fglrx(0): Output DFP7 using monitor section 0-DFP7
[ 438.756] (**) fglrx(0): Option "PreferredMode" "1920x1200"
[ 438.756] (**) fglrx(0): Option "Position" "1280 0"
[ 438.756] (**) fglrx(0): Option "Disable" "false"
[ 438.756] (**) fglrx(0): Option "Rotate" "normal"
[ 438.756] (**) fglrx(0): Option "TargetRefresh" "60"
[ 438.756] (II) fglrx(0): Output CRT1 has no monitor section
[ 438.756] (II) Loading sub module "ddc"
[ 438.756] (II) LoadModule: "ddc"
[ 438.756] (II) Module "ddc" already built-in
[ 438.756] (II) fglrx(0): Connected Display0: DFP6
[ 438.756] (II) fglrx(0): Display0 EDID data ---------------------------
[ 438.756] (II) fglrx(0): Manufacturer: GSM Model: 4475 Serial#: 41364
[ 438.756] (II) fglrx(0): Year: 2007 Week: 3
[ 438.756] (II) fglrx(0): EDID Version: 1.3
[ 438.756] (II) fglrx(0): Digital Display Input
[ 438.756] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 438.756] (II) fglrx(0): Gamma: 2.20
[ 438.756] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 438.756] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 438.756] (II) fglrx(0): First detailed timing is preferred mode
[ 438.756] (II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 438.756] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 438.756] (II) fglrx(0): Supported established timings:
[ 438.756] (II) fglrx(0): 720x400@70Hz
[ 438.756] (II) fglrx(0): 640x480@60Hz
[ 438.756] (II) fglrx(0): 640x480@75Hz
[ 438.756] (II) fglrx(0): 800x600@60Hz
[ 438.756] (II) fglrx(0): 800x600@75Hz
[ 438.757] (II) fglrx(0): 832x624@75Hz
[ 438.757] (II) fglrx(0): 1024x768@60Hz
[ 438.757] (II) fglrx(0): 1024x768@75Hz
[ 438.757] (II) fglrx(0): 1152x864@75Hz
[ 438.757] (II) fglrx(0): Manufacturer's mask: 0
[ 438.757] (II) fglrx(0): Supported standard timings:
[ 438.757] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 438.757] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 438.757] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 438.757] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 438.757] (II) fglrx(0): Supported detailed timing:
[ 438.757] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 438.757] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 438.757] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 438.757] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 71 kHz, PixClock max 115 MHz
[ 438.757] (II) fglrx(0): Monitor name: L1753TR
[ 438.757] (II) fglrx(0): Monitor name:
[ 438.757] (II) fglrx(0): EDID (in hex):
[ 438.757] (II) fglrx(0): 00ffffffffffff001e6d754494a10000
[ 438.757] (II) fglrx(0): 03110103ea221b78eaaec5a2574a9c25
[ 438.757] (II) fglrx(0): 125054a56a80314f454f614f81800101
[ 438.757] (II) fglrx(0): 010101010101302a009851002a403070
[ 438.757] (II) fglrx(0): 1300520e1100001e000000fd00384b1e
[ 438.757] (II) fglrx(0): 470b000a202020202020000000fc004c
[ 438.757] (II) fglrx(0): 3137353354520a2020202020000000fc
[ 438.757] (II) fglrx(0): 00200a202020202020202020202000cc
[ 438.757] (II) fglrx(0): End of Display0 EDID data --------------------
[ 438.757] (II) fglrx(0): Connected Display1: DFP7
[ 438.757] (II) fglrx(0): Display1 EDID data ---------------------------
[ 438.757] (II) fglrx(0): Manufacturer: GSM Model: 59b4 Serial#: 98999
[ 438.757] (II) fglrx(0): Year: 2014 Week: 1
[ 438.757] (II) fglrx(0): EDID Version: 1.3
[ 438.757] (II) fglrx(0): Digital Display Input
[ 438.757] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 33
[ 438.757] (II) fglrx(0): Gamma: 2.20
[ 438.757] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 438.757] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 438.757] (II) fglrx(0): First detailed timing is preferred mode
[ 438.757] (II) fglrx(0): redX: 0.652 redY: 0.335 greenX: 0.304 greenY: 0.633
[ 438.757] (II) fglrx(0): blueX: 0.152 blueY: 0.065 whiteX: 0.312 whiteY: 0.329
[ 438.757] (II) fglrx(0): Supported established timings:
[ 438.757] (II) fglrx(0): 720x400@70Hz
[ 438.757] (II) fglrx(0): 640x480@60Hz
[ 438.757] (II) fglrx(0): 640x480@75Hz
[ 438.757] (II) fglrx(0): 800x600@60Hz
[ 438.757] (II) fglrx(0): 800x600@75Hz
[ 438.757] (II) fglrx(0): 1024x768@60Hz
[ 438.757] (II) fglrx(0): 1024x768@75Hz
[ 438.757] (II) fglrx(0): 1280x1024@75Hz
[ 438.757] (II) fglrx(0): Manufacturer's mask: 0
[ 438.757] (II) fglrx(0): Supported standard timings:
[ 438.757] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 438.757] (II) fglrx(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 438.757] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 438.757] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 438.757] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 438.757] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 438.758] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 438.758] (II) fglrx(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 438.758] (II) fglrx(0): Supported detailed timing:
[ 438.758] (II) fglrx(0): clock: 154.0 MHz Image Size: 520 x 330 mm
[ 438.758] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 438.758] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 438.758] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 438.758] (II) fglrx(0): Monitor name: 24EB23
[ 438.758] (II) fglrx(0): Serial No: 401NDNU2W999
[ 438.758] (II) fglrx(0): EDID (in hex):
[ 438.758] (II) fglrx(0): 00ffffffffffff001e6db459b7820100
[ 438.758] (II) fglrx(0): 0118010380342178ea3c31a7554da227
[ 438.758] (II) fglrx(0): 105054a54b00714f81008180818f9500
[ 438.758] (II) fglrx(0): a940b300d1c0283c80a070b023403020
[ 438.758] (II) fglrx(0): 3600084a2100001a000000fd00384b1e
[ 438.758] (II) fglrx(0): 5311000a202020202020000000fc0032
[ 438.758] (II) fglrx(0): 34454232330a202020202020000000ff
[ 438.758] (II) fglrx(0): 003430314e444e5532573939390a00a4
[ 438.758] (II) fglrx(0): End of Display1 EDID data --------------------
[ 438.758] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 438.760] (II) fglrx(0): EDID for output DFP1
[ 438.760] (II) fglrx(0): EDID for output DFP2
[ 438.760] (II) fglrx(0): EDID for output DFP3
[ 438.760] (II) fglrx(0): EDID for output DFP4
[ 438.760] (II) fglrx(0): EDID for output DFP5
[ 438.760] (II) fglrx(0): EDID for output DFP6
[ 438.760] (II) fglrx(0): Manufacturer: GSM Model: 4475 Serial#: 41364
[ 438.760] (II) fglrx(0): Year: 2007 Week: 3
[ 438.760] (II) fglrx(0): EDID Version: 1.3
[ 438.760] (II) fglrx(0): Digital Display Input
[ 438.760] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 438.760] (II) fglrx(0): Gamma: 2.20
[ 438.760] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 438.760] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 438.760] (II) fglrx(0): First detailed timing is preferred mode
[ 438.760] (II) fglrx(0): redX: 0.635 redY: 0.342 greenX: 0.292 greenY: 0.611
[ 438.760] (II) fglrx(0): blueX: 0.147 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 438.760] (II) fglrx(0): Supported established timings:
[ 438.760] (II) fglrx(0): 720x400@70Hz
[ 438.760] (II) fglrx(0): 640x480@60Hz
[ 438.760] (II) fglrx(0): 640x480@75Hz
[ 438.760] (II) fglrx(0): 800x600@60Hz
[ 438.760] (II) fglrx(0): 800x600@75Hz
[ 438.760] (II) fglrx(0): 832x624@75Hz
[ 438.760] (II) fglrx(0): 1024x768@60Hz
[ 438.760] (II) fglrx(0): 1024x768@75Hz
[ 438.760] (II) fglrx(0): 1152x864@75Hz
[ 438.760] (II) fglrx(0): Manufacturer's mask: 0
[ 438.760] (II) fglrx(0): Supported standard timings:
[ 438.760] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 438.760] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 438.760] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 438.760] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 438.760] (II) fglrx(0): Supported detailed timing:
[ 438.760] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 438.760] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 438.760] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 438.760] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 71 kHz, PixClock max 115 MHz
[ 438.760] (II) fglrx(0): Monitor name: L1753TR
[ 438.760] (II) fglrx(0): Monitor name:
[ 438.760] (II) fglrx(0): EDID (in hex):
[ 438.761] (II) fglrx(0): 00ffffffffffff001e6d754494a10000
[ 438.761] (II) fglrx(0): 03110103ea221b78eaaec5a2574a9c25
[ 438.761] (II) fglrx(0): 125054a56a80314f454f614f81800101
[ 438.761] (II) fglrx(0): 010101010101302a009851002a403070
[ 438.761] (II) fglrx(0): 1300520e1100001e000000fd00384b1e
[ 438.761] (II) fglrx(0): 470b000a202020202020000000fc004c
[ 438.761] (II) fglrx(0): 3137353354520a2020202020000000fc
[ 438.761] (II) fglrx(0): 00200a202020202020202020202000cc
[ 438.761] (II) fglrx(0): User Preference Output DFP6 using refresh rate 60.0 Hz.
[ 438.761] (II) fglrx(0): Printing probed modes for output DFP6
[ 438.761] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP)
[ 438.761] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 438.761] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 438.761] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 438.761] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 438.761] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 438.761] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 438.761] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 438.761] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 438.761] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 438.761] (II) fglrx(0): EDID for output DFP7
[ 438.761] (II) fglrx(0): Manufacturer: GSM Model: 59b4 Serial#: 98999
[ 438.761] (II) fglrx(0): Year: 2014 Week: 1
[ 438.761] (II) fglrx(0): EDID Version: 1.3
[ 438.761] (II) fglrx(0): Digital Display Input
[ 438.761] (II) fglrx(0): Max Image Size [cm]: horiz.: 52 vert.: 33
[ 438.761] (II) fglrx(0): Gamma: 2.20
[ 438.761] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 438.761] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 438.761] (II) fglrx(0): First detailed timing is preferred mode
[ 438.761] (II) fglrx(0): redX: 0.652 redY: 0.335 greenX: 0.304 greenY: 0.633
[ 438.761] (II) fglrx(0): blueX: 0.152 blueY: 0.065 whiteX: 0.312 whiteY: 0.329
[ 438.761] (II) fglrx(0): Supported established timings:
[ 438.761] (II) fglrx(0): 720x400@70Hz
[ 438.761] (II) fglrx(0): 640x480@60Hz
[ 438.761] (II) fglrx(0): 640x480@75Hz
[ 438.761] (II) fglrx(0): 800x600@60Hz
[ 438.761] (II) fglrx(0): 800x600@75Hz
[ 438.761] (II) fglrx(0): 1024x768@60Hz
[ 438.761] (II) fglrx(0): 1024x768@75Hz
[ 438.761] (II) fglrx(0): 1280x1024@75Hz
[ 438.761] (II) fglrx(0): Manufacturer's mask: 0
[ 438.761] (II) fglrx(0): Supported standard timings:
[ 438.762] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 438.762] (II) fglrx(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 438.762] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 438.762] (II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
[ 438.762] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 438.762] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 438.762] (II) fglrx(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 438.762] (II) fglrx(0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 438.762] (II) fglrx(0): Supported detailed timing:
[ 438.762] (II) fglrx(0): clock: 154.0 MHz Image Size: 520 x 330 mm
[ 438.762] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 438.762] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 438.762] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 438.762] (II) fglrx(0): Monitor name: 24EB23
[ 438.762] (II) fglrx(0): Serial No: 401NDNU2W999
[ 438.762] (II) fglrx(0): EDID (in hex):
[ 438.762] (II) fglrx(0): 00ffffffffffff001e6db459b7820100
[ 438.762] (II) fglrx(0): 0118010380342178ea3c31a7554da227
[ 438.762] (II) fglrx(0): 105054a54b00714f81008180818f9500
[ 438.762] (II) fglrx(0): a940b300d1c0283c80a070b023403020
[ 438.762] (II) fglrx(0): 3600084a2100001a000000fd00384b1e
[ 438.762] (II) fglrx(0): 5311000a202020202020000000fc0032
[ 438.762] (II) fglrx(0): 34454232330a202020202020000000ff
[ 438.762] (II) fglrx(0): 003430314e444e5532573939390a00a4
[ 438.762] (II) fglrx(0): User Preference Output DFP7 using refresh rate 60.0 Hz.
[ 438.762] (II) fglrx(0): Printing probed modes for output DFP7
[ 438.762] (II) fglrx(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz UeP)
[ 438.762] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1400x1050"x60.0 162.00 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1152x864"x60.0 154.00 1152 1968 2000 2080 864 1203 1209 1235 +hsync -vsync (74.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1280x720"x60.0 83.50 1280 1352 1480 1680 720 803 809 831 -hsync +vsync (49.7 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 438.762] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 438.762] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 438.762] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 438.762] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 438.762] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 438.762] (II) fglrx(0): EDID for output CRT1
[ 438.762] (II) fglrx(0): Output DFP1 disconnected
[ 438.762] (II) fglrx(0): Output DFP2 disconnected
[ 438.763] (II) fglrx(0): Output DFP3 disconnected
[ 438.763] (II) fglrx(0): Output DFP4 disconnected
[ 438.763] (II) fglrx(0): Output DFP5 disconnected
[ 438.763] (II) fglrx(0): Output DFP6 connected
[ 438.763] (II) fglrx(0): Output DFP7 connected
[ 438.763] (II) fglrx(0): Output CRT1 disconnected
[ 438.763] (II) fglrx(0): Using user preference for initial modes
[ 438.763] (II) fglrx(0): Output DFP6 using initial mode 1280x1024
[ 438.763] (II) fglrx(0): Output DFP7 using initial mode 1920x1200
[ 438.763] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 438.763] (II) fglrx(0): DPI set to (96, 96)
[ 438.763] (II) fglrx(0): Eyefinity capable adapter detected.
[ 438.763] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series has 6 configurable heads and 2 displays connected.
[ 438.763] (WW) fglrx(0): Big Desktop related functionalities are replaced by RandR 1.2!
[ 438.763] (==) fglrx(0): PseudoColor visuals disabled
[ 438.763] (II) Loading sub module "ramdac"
[ 438.763] (II) LoadModule: "ramdac"
[ 438.763] (II) Module "ramdac" already built-in
[ 438.763] (==) fglrx(0): NoDRI = NO
[ 438.763] (==) fglrx(0): Capabilities: 0x00000000
[ 438.763] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 438.763] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 438.763] (==) fglrx(0): UseFastTLS=0
[ 438.763] (II) fglrx(0): Desktop Vsync is enabled.
[ 438.763] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 438.763] (II) fglrx(1): === [xdl_xs116_atiddxPreInit] === begin
[ 438.763] (WW) fglrx(1): Quitting screen 1 -- no monitor specified.
[ 438.763] (II) fglrx(1): === [xdl_xs116_atiddxPreInit] === end
[ 438.763] (II) UnloadModule: "fglrx"
[ 438.763] (II) UnloadSubModule: "fglrxdrm"
[ 438.763] (--) Depth 24 pixmap format is 32 bpp
[ 438.763] (II) fglrx(0): doing swlDriScreenInit
[ 438.763] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 438.763] ukiDynamicMajor: found major device number 249
[ 438.763] ukiDynamicMajor: found major device number 249
[ 438.763] ukiDynamicMajor: found major device number 249
[ 438.763] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 438.763] ukiOpenDevice: node name is /dev/ati/card0
[ 438.764] ukiOpenDevice: open result is 16, (OK)
[ 438.764] ukiOpenByBusid: ukiOpenMinor returns 16
[ 438.764] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 438.764] (II) fglrx(0): [uki] DRM interface version 1.0
[ 438.764] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 438.764] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 438.764] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fa4570d2000
[ 438.764] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 438.764] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 438.764] (II) fglrx(0): swlDriScreenInit done
[ 438.764] (II) fglrx(0): Kernel Module Version Information:
[ 438.764] (II) fglrx(0): Name: fglrx
[ 438.764] (II) fglrx(0): Version: 14.20.7
[ 438.764] (II) fglrx(0): Date: Sep 2 2014
[ 438.764] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 438.764] (II) fglrx(0): Kernel Module version matches driver.
[ 438.764] (II) fglrx(0): Kernel Module Build Time Information:
[ 438.764] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.16.2-1-ARCH
[ 438.764] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 438.764] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 438.764] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 438.764] (II) fglrx(0): [uki] register handle = 0x00004000
[ 438.772] (II) fglrx(0): DRI initialization successfull
[ 438.783] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x02710000
[ 438.792] (==) fglrx(0): Backing store enabled
[ 438.792] (==) fglrx(0): DPMS enabled
[ 438.792] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 438.792] (**) fglrx(0): Textured Video is enabled.
[ 438.792] (II) LoadModule: "glesx"
[ 438.792] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 438.926] (II) Module glesx: vendor="X.Org Foundation"
[ 438.926] compiled for 1.4.99.906, module version = 1.0.0
[ 438.927] (II) fglrx(0): GLESX enableFlags = 8784
[ 438.927] (II) fglrx(0): GLESX is enabled
[ 438.927] (II) LoadModule: "amdxmm"
[ 438.927] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 438.941] (II) Module amdxmm: vendor="X.Org Foundation"
[ 438.941] compiled for 1.4.99.906, module version = 2.0.0
[ 438.963] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 438.970] (II) fglrx(0): Enable composite support successfully
[ 438.970] (II) fglrx(0): X context handle = 0x1
[ 438.970] (II) fglrx(0): [DRI] installation complete
[ 438.970] (==) fglrx(0): Silken mouse enabled
[ 438.971] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 438.971] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 439.163] (--) RandR disabled
[ 439.169] ukiDynamicMajor: found major device number 249
[ 439.169] ukiDynamicMajor: found major device number 249
[ 439.169] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 439.169] ukiOpenDevice: node name is /dev/ati/card0
[ 439.169] ukiOpenDevice: open result is 17, (OK)
[ 439.170] ukiOpenByBusid: ukiOpenMinor returns 17
[ 439.170] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 439.170] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 439.480] ukiDynamicMajor: found major device number 249
[ 439.480] ukiDynamicMajor: found major device number 249
[ 439.480] ukiDynamicMajor: found major device number 249
[ 439.480] ukiOpenDevice: node name is /dev/ati/card0
[ 439.480] ukiOpenDevice: open result is 18, (OK)
[ 439.480] ukiGetBusid returned 'PCI:1:0:0'
[ 439.480] ukiOpenDevice: node name is /dev/ati/card1
[ 439.480] ukiOpenDevice: open result is -1, (No such device)
[ 439.480] ukiOpenDevice: open result is -1, (No such device)
[ 439.480] ukiOpenDevice: Open failed
[ 439.480] ukiOpenDevice: node name is /dev/ati/card2
[ 439.480] ukiOpenDevice: open result is -1, (No such device)
[ 439.480] ukiOpenDevice: open result is -1, (No such device)
[ 439.480] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card3
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card4
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card5
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card6
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card7
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card8
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card9
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card10
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card11
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card12
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card13
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card14
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiOpenDevice: node name is /dev/ati/card15
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: open result is -1, (No such device)
[ 439.481] ukiOpenDevice: Open failed
[ 439.481] ukiDynamicMajor: found major device number 249
[ 439.481] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 439.481] ukiOpenDevice: node name is /dev/ati/card0
[ 439.481] ukiOpenDevice: open result is 18, (OK)
[ 439.481] ukiOpenByBusid: ukiOpenMinor returns 18
[ 439.481] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 440.410] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 440.412] ukiDynamicMajor: found major device number 249
[ 440.412] ukiDynamicMajor: found major device number 249
[ 440.412] ukiDynamicMajor: found major device number 249
[ 440.412] ukiOpenDevice: node name is /dev/ati/card0
[ 440.412] ukiOpenDevice: open result is 19, (OK)
[ 440.412] ukiGetBusid returned 'PCI:1:0:0'
[ 440.412] ukiOpenDevice: node name is /dev/ati/card1
[ 440.412] ukiOpenDevice: open result is -1, (No such device)
[ 440.412] ukiOpenDevice: open result is -1, (No such device)
[ 440.412] ukiOpenDevice: Open failed
[ 440.412] ukiOpenDevice: node name is /dev/ati/card2
[ 440.412] ukiOpenDevice: open result is -1, (No such device)
[ 440.412] ukiOpenDevice: open result is -1, (No such device)
[ 440.412] ukiOpenDevice: Open failed
[ 440.412] ukiOpenDevice: node name is /dev/ati/card3
[ 440.412] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card4
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card5
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card6
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card7
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card8
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card9
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card10
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card11
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card12
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card13
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card14
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiOpenDevice: node name is /dev/ati/card15
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: open result is -1, (No such device)
[ 440.413] ukiOpenDevice: Open failed
[ 440.413] ukiDynamicMajor: found major device number 249
[ 440.413] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 440.413] ukiOpenDevice: node name is /dev/ati/card0
[ 440.413] ukiOpenDevice: open result is 19, (OK)
[ 440.414] ukiOpenByBusid: ukiOpenMinor returns 19
[ 440.414] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 440.520] (II) fglrx(0): OverDrive5 Detected!
[ 440.569] (II) fglrx(0): Desktop Vsync is enabled.
[ 440.569] (WW) fglrx(0): TFD direct rotation is not supported currently with multi-viewport screen
[ 440.569] (II) fglrx(0): Setting screen physical size to 846 x 317
[ 440.919] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 440.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 440.919] (**) Power Button: Applying InputClass "keyboard"
[ 440.919] (II) LoadModule: "evdev"
[ 440.919] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 440.944] (II) Module evdev: vendor="X.Org Foundation"
[ 440.944] compiled for 1.16.0, module version = 2.9.0
[ 440.944] Module class: X.Org XInput Driver
[ 440.944] ABI class: X.Org XInput driver, version 21.0
[ 440.945] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 20 paused 1
[ 440.945] (II) systemd-logind: releasing fd for 13:67
[ 440.972] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 440.972] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 440.972] (**) Power Button: Applying InputClass "keyboard"
[ 440.972] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 1
[ 440.972] (II) systemd-logind: releasing fd for 13:66
[ 441.005] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7)
[ 441.005] (II) No input driver specified, ignoring this device.
[ 441.005] (II) This device may have been added with another device file.
[ 441.006] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8)
[ 441.006] (II) No input driver specified, ignoring this device.
[ 441.006] (II) This device may have been added with another device file.
[ 441.006] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9)
[ 441.006] (II) No input driver specified, ignoring this device.
[ 441.006] (II) This device may have been added with another device file.
[ 441.007] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event10)
[ 441.007] (II) No input driver specified, ignoring this device.
[ 441.007] (II) This device may have been added with another device file.
[ 441.007] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 441.007] (II) No input driver specified, ignoring this device.
[ 441.007] (II) This device may have been added with another device file.
[ 441.008] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6)
[ 441.008] (II) No input driver specified, ignoring this device.
[ 441.008] (II) This device may have been added with another device file.
[ 441.008] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/event0)
[ 441.008] (**) Logitech Unifying Device. Wireless PID:1028: Applying InputClass "evdev pointer catchall"
[ 441.009] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 20 paused 1
[ 441.009] (II) systemd-logind: releasing fd for 13:64
[ 441.084] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1028 (/dev/input/mouse0)
[ 441.084] (II) No input driver specified, ignoring this device.
[ 441.084] (II) This device may have been added with another device file.
[ 441.085] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:4003 (/dev/input/event1)
[ 441.085] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "evdev keyboard catchall"
[ 441.085] (**) Logitech Unifying Device. Wireless PID:4003: Applying InputClass "keyboard"
[ 441.085] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 20 paused 1
[ 441.086] (II) systemd-logind: releasing fd for 13:65
[ 441.117] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event11)
[ 441.117] (II) No input driver specified, ignoring this device.
[ 441.117] (II) This device may have been added with another device file.
[ 441.117] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event12)
[ 441.117] (II) No input driver specified, ignoring this device.
[ 441.117] (II) This device may have been added with another device file.
[ 441.118] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event13)
[ 441.118] (II) No input driver specified, ignoring this device.
[ 441.118] (II) This device may have been added with another device file.
[ 441.118] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event14)
[ 441.118] (II) No input driver specified, ignoring this device.
[ 441.118] (II) This device may have been added with another device file.
[ 441.119] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event15)
[ 441.119] (II) No input driver specified, ignoring this device.
[ 441.119] (II) This device may have been added with another device file.
[ 441.119] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event16)
[ 441.119] (II) No input driver specified, ignoring this device.
[ 441.119] (II) This device may have been added with another device file.
[ 441.120] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event17)
[ 441.120] (II) No input driver specified, ignoring this device.
[ 441.120] (II) This device may have been added with another device file.
[ 441.120] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event18)
[ 441.120] (II) No input driver specified, ignoring this device.
[ 441.120] (II) This device may have been added with another device file.
[ 441.120] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 441.121] (II) No input driver specified, ignoring this device.
[ 441.121] (II) This device may have been added with another device file.
[ 441.125] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 443.088] (II) fglrx(0): EDID vendor "GSM", prod id 17525
[ 443.089] (II) fglrx(0): Using EDID range info for horizontal sync
[ 443.089] (II) fglrx(0): Using EDID range info for vertical refresh
[ 443.089] (II) fglrx(0): Printing DDC gathered Modelines:
[ 443.089] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 443.089] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 443.089] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 443.089] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 443.089] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 443.089] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 443.089] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 443.089] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 443.089] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 443.089] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 443.089] (II) fglrx(0): User Preference Output DFP6 using refresh rate 60.0 Hz.
[ 443.090] (II) fglrx(0): User Preference Output DFP7 using refresh rate 60.0 Hz.Dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c0af15f3-877a-4929-9c55-657c5bb474cd rw quiet nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be478fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be479000-0x00000000bea36fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bea37000-0x00000000bee34fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bee35000-0x00000000bf101fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf102000-0x00000000bf154fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf155000-0x00000000bf155fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf156000-0x00000000bf35bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf35c000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000043effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xbee17000 ACPI 2.0=0xbee17000 SMBIOS=0xf04c0 MPS=0xfd4d0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003f000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002047000) (16MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002047000-0x0000000037968000) (857MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000037968000-0x0000000037cac000) (3MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037cac000-0x00000000837af000) (1211MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x00000000837af000-0x00000000b04d4000) (717MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x00000000b04d4000-0x00000000b04da000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x00000000b04da000-0x00000000b04f8000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x00000000b04f8000-0x00000000b31e9000) (44MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x00000000b31e9000-0x00000000b3423000) (2MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x00000000b3423000-0x00000000b3430000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x00000000b3430000-0x00000000b3434000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x00000000b3434000-0x00000000b3435000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x00000000b3435000-0x00000000b390b000) (4MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x00000000b390b000-0x00000000b390e000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x00000000b390e000-0x00000000bd17a000) (152MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000bd17a000-0x00000000bd17b000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000bd17b000-0x00000000bdd8f000) (12MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000bdd8f000-0x00000000be242000) (4MB)
[ 0.000000] efi: mem23: type=2, attr=0xf, range=[0x00000000be242000-0x00000000be24c000) (0MB)
[ 0.000000] efi: mem24: type=3, attr=0xf, range=[0x00000000be24c000-0x00000000be479000) (2MB)
[ 0.000000] efi: mem25: type=0, attr=0xf, range=[0x00000000be479000-0x00000000be59f000) (1MB)
[ 0.000000] efi: mem26: type=0, attr=0xf, range=[0x00000000be59f000-0x00000000bea37000) (4MB)
[ 0.000000] efi: mem27: type=10, attr=0xf, range=[0x00000000bea37000-0x00000000bed04000) (2MB)
[ 0.000000] efi: mem28: type=10, attr=0xf, range=[0x00000000bed04000-0x00000000bee25000) (1MB)
[ 0.000000] efi: mem29: type=10, attr=0xf, range=[0x00000000bee25000-0x00000000bee2a000) (0MB)
[ 0.000000] efi: mem30: type=10, attr=0xf, range=[0x00000000bee2a000-0x00000000bee35000) (0MB)
[ 0.000000] efi: mem31: type=6, attr=0x800000000000000f, range=[0x00000000bee35000-0x00000000beec4000) (0MB)
[ 0.000000] efi: mem32: type=6, attr=0x800000000000000f, range=[0x00000000beec4000-0x00000000bf102000) (2MB)
[ 0.000000] efi: mem33: type=5, attr=0x800000000000000f, range=[0x00000000bf102000-0x00000000bf112000) (0MB)
[ 0.000000] efi: mem34: type=5, attr=0x800000000000000f, range=[0x00000000bf112000-0x00000000bf155000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x00000000bf155000-0x00000000bf156000) (0MB)
[ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000bf156000-0x00000000bf35c000) (2MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x00000000bf35c000-0x00000000bf4c8000) (1MB)
[ 0.000000] efi: mem38: type=3, attr=0xf, range=[0x00000000bf4c8000-0x00000000bf7a0000) (2MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x00000000bf7a0000-0x00000000bf7a1000) (0MB)
[ 0.000000] efi: mem40: type=3, attr=0xf, range=[0x00000000bf7a1000-0x00000000bf7a3000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x00000000bf7a3000-0x00000000bf7a5000) (0MB)
[ 0.000000] efi: mem42: type=3, attr=0xf, range=[0x00000000bf7a5000-0x00000000bf7a9000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x00000000bf7a9000-0x00000000bf7c2000) (0MB)
[ 0.000000] efi: mem44: type=3, attr=0xf, range=[0x00000000bf7c2000-0x00000000bf7d4000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x00000000bf7d4000-0x00000000bf7d7000) (0MB)
[ 0.000000] efi: mem46: type=3, attr=0xf, range=[0x00000000bf7d7000-0x00000000bf7d9000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x00000000bf7d9000-0x00000000bf7db000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000bf7db000-0x00000000bf7dc000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x00000000bf7dc000-0x00000000bf800000) (0MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x0000000100001000-0x000000043f000000) (13295MB)
[ 0.000000] efi: mem51: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem52: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem53: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem54: type=11, attr=0x8000000000000001, range=[0x00000000fec20000-0x00000000fec21000) (0MB)
[ 0.000000] efi: mem55: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem56: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
[ 0.000000] efi: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem58: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS FC 02/05/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BF800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8800000fd880]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43ee00000-0x43effffff]
[ 0.000000] [mem 0x43ee00000-0x43effffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43c000000-0x43edfffff]
[ 0.000000] [mem 0x43c000000-0x43edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x43bffffff]
[ 0.000000] [mem 0x400000000-0x43bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbe478fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbe3fffff] page 2M
[ 0.000000] [mem 0xbe400000-0xbe478fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf155000-0xbf155fff]
[ 0.000000] [mem 0xbf155000-0xbf155fff] page 4k
[ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf35c000-0xbf7fffff]
[ 0.000000] [mem 0xbf35c000-0xbf3fffff] page 4k
[ 0.000000] [mem 0xbf400000-0xbf7fffff] page 2M
[ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x3ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37968000-0x37cabfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BEE17000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEE17078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEE1D820 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
[ 0.000000] ACPI: DSDT 0x00000000BEE17178 0066A3 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BEE2FF80 000040
[ 0.000000] ACPI: APIC 0x00000000BEE1D918 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BEE1D9B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BEE1DA00 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BEE1DA40 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: BGRT 0x00000000BEE1DA78 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BEE1DAB0 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: MATS 0x00000000BEE1F1C8 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: IVRS 0x00000000BEE1F200 0000D8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x43effffff]
[ 0.000000] NODE_DATA [mem 0x43eff7000-0x43effbfff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x43effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0xbe478fff]
[ 0.000000] node 0: [mem 0xbf155000-0xbf155fff]
[ 0.000000] node 0: [mem 0xbf35c000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x43effffff]
[ 0.000000] On node 0 totalpages: 4184252
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12133 pages used for memmap
[ 0.000000] DMA32 zone: 776478 pages, LIFO batch:31
[ 0.000000] Normal zone: 53184 pages used for memmap
[ 0.000000] Normal zone: 3403775 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe479000-0xbea36fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea37000-0xbee34fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbee35000-0xbf101fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf102000-0xbf154fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf156000-0xbf35bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88043ec00000 s86784 r8192 d23808 u262144
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4118846
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c0af15f3-877a-4929-9c55-657c5bb474cd rw quiet nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 16210040K/16737008K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 526968K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1288 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4018.482 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 8040.83 BogoMIPS (lpj=13394940)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20140424
[ 0.002554] ACPI: All ACPI Tables successfully acquired
[ 0.006074] Security Framework initialized
[ 0.006080] Yama: becoming mindful.
[ 0.007032] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.010650] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012194] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.012212] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.012469] Initializing cgroup subsys memory
[ 0.012485] Initializing cgroup subsys devices
[ 0.012489] Initializing cgroup subsys freezer
[ 0.012492] Initializing cgroup subsys net_cls
[ 0.012496] Initializing cgroup subsys blkio
[ 0.012514] tseg: 00bf800000
[ 0.012516] CPU: Physical Processor ID: 0
[ 0.012517] CPU: Processor Core ID: 0
[ 0.012518] mce: CPU supports 7 MCE banks
[ 0.012524] LVT offset 1 assigned for vector 0xf9
[ 0.012528] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
tlb_flushall_shift: 6
[ 0.012590] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.018111] ftrace: allocating 20434 entries in 80 pages
[ 0.097067] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.130095] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
[ 0.234273] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.234277] ... version: 0
[ 0.234278] ... bit width: 48
[ 0.234279] ... generic registers: 6
[ 0.234280] ... value mask: 0000ffffffffffff
[ 0.234281] ... max period: 00007fffffffffff
[ 0.234282] ... fixed-purpose events: 0
[ 0.234282] ... event mask: 000000000000003f
[ 0.254352] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.261031] x86: Booting SMP configuration:
[ 0.261032] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.367508] x86: Booted up 1 node, 8 CPUs
[ 0.367521] smpboot: Total of 8 processors activated (64321.70 BogoMIPS)
[ 0.377388] devtmpfs: initialized
[ 0.380990] PM: Registering ACPI NVS region [mem 0xbea37000-0xbee34fff] (4186112 bytes)
[ 0.381043] PM: Registering ACPI NVS region [mem 0xbf156000-0xbf35bfff] (2121728 bytes)
[ 0.381837] pinctrl core: initialized pinctrl subsystem
[ 0.381864] RTC time: 15:50:05, date: 09/13/14
[ 0.381906] NET: Registered protocol family 16
[ 0.382007] cpuidle: using governor ladder
[ 0.382009] cpuidle: using governor menu
[ 0.382068] ACPI: bus type PCI registered
[ 0.382069] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.382129] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.382131] PCI: not using MMCONFIG
[ 0.382132] PCI: Using configuration type 1 for base access
[ 0.382133] PCI: Using configuration type 1 for extended access
[ 0.391428] ACPI: Added _OSI(Module Device)
[ 0.391430] ACPI: Added _OSI(Processor Device)
[ 0.391431] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.391432] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.393540] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.404778] ACPI: Interpreter enabled
[ 0.404784] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.404787] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.404801] ACPI: (supports S0 S3 S4 S5)
[ 0.404802] ACPI: Using IOAPIC for interrupt routing
[ 0.404925] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.404962] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.405274] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.527044] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.527048] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.527053] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.527467] PCI host bridge to bus 0000:00
[ 0.527469] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.527471] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.527473] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.527474] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.527476] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.527477] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.527478] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.527480] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.527489] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.527599] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.527700] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.527732] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.527779] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.527821] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.527852] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.527900] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.527934] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.527965] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.528011] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.528056] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.528070] pci 0000:00:11.0: reg 0x10: [io 0xf090-0xf097]
[ 0.528077] pci 0000:00:11.0: reg 0x14: [io 0xf080-0xf083]
[ 0.528085] pci 0000:00:11.0: reg 0x18: [io 0xf070-0xf077]
[ 0.528092] pci 0000:00:11.0: reg 0x1c: [io 0xf060-0xf063]
[ 0.528099] pci 0000:00:11.0: reg 0x20: [io 0xf050-0xf05f]
[ 0.528106] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[ 0.528208] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.528218] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[ 0.528298] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.528336] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.528349] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[ 0.528409] pci 0000:00:12.2: supports D1 D2
[ 0.528411] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.528457] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.528496] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.528506] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[ 0.528587] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.528624] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.528638] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[ 0.528698] pci 0000:00:13.2: supports D1 D2
[ 0.528699] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.528745] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.528782] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.528893] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.528903] pci 0000:00:14.1: reg 0x10: [io 0xf040-0xf047]
[ 0.528910] pci 0000:00:14.1: reg 0x14: [io 0xf030-0xf033]
[ 0.528917] pci 0000:00:14.1: reg 0x18: [io 0xf020-0xf027]
[ 0.528924] pci 0000:00:14.1: reg 0x1c: [io 0xf010-0xf013]
[ 0.528931] pci 0000:00:14.1: reg 0x20: [io 0xf000-0xf00f]
[ 0.528946] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.528947] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.528948] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.528950] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.529022] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.529038] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.529086] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.529131] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.529165] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.529278] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.529343] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.529375] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.529385] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[ 0.529466] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.529505] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.529560] pci 0000:00:15.0: supports D1 D2
[ 0.529610] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.529646] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.529700] pci 0000:00:15.1: supports D1 D2
[ 0.529750] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.529789] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.529799] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[ 0.529879] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.529918] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.529932] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[ 0.529991] pci 0000:00:16.2: supports D1 D2
[ 0.529993] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.530039] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.530075] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.530149] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.530218] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.530288] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.530360] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.530428] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.530541] pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
[ 0.530552] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.530560] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
[ 0.530565] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.530575] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[ 0.530613] pci 0000:01:00.0: supports D1 D2
[ 0.530614] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.530670] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.530679] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[ 0.530726] pci 0000:01:00.1: supports D1 D2
[ 0.534473] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.534476] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.534478] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.534481] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.534527] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.534543] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[ 0.534611] pci 0000:02:00.0: supports D1 D2
[ 0.534613] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.541143] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.541147] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.541194] pci 0000:03:00.0: [1b4b:9172] type 00 class 0x010601
[ 0.541204] pci 0000:03:00.0: reg 0x10: [io 0xd040-0xd047]
[ 0.541210] pci 0000:03:00.0: reg 0x14: [io 0xd030-0xd033]
[ 0.541216] pci 0000:03:00.0: reg 0x18: [io 0xd020-0xd027]
[ 0.541222] pci 0000:03:00.0: reg 0x1c: [io 0xd010-0xd013]
[ 0.541228] pci 0000:03:00.0: reg 0x20: [io 0xd000-0xd00f]
[ 0.541234] pci 0000:03:00.0: reg 0x24: [mem 0xfe810000-0xfe8101ff]
[ 0.541241] pci 0000:03:00.0: reg 0x30: [mem 0xfe800000-0xfe80ffff pref]
[ 0.541270] pci 0000:03:00.0: PME# supported from D3hot
[ 0.547813] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.547816] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.547818] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.547871] pci 0000:04:0e.0: [1106:3044] type 00 class 0x0c0010
[ 0.547887] pci 0000:04:0e.0: reg 0x10: [mem 0xfe700000-0xfe7007ff]
[ 0.547895] pci 0000:04:0e.0: reg 0x14: [io 0xc000-0xc07f]
[ 0.547957] pci 0000:04:0e.0: supports D2
[ 0.547959] pci 0000:04:0e.0: PME# supported from D2 D3hot D3cold
[ 0.548019] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 0.548022] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.548025] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.548029] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.548031] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.548033] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.548034] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.548035] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.548037] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.548038] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.548109] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.548126] pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 0.548151] pci 0000:05:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.548166] pci 0000:05:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.548247] pci 0000:05:00.0: supports D1 D2
[ 0.548249] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.548281] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.554488] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 0.554493] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.554498] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.554562] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.554584] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
[ 0.554679] pci 0000:06:00.0: supports D1 D2
[ 0.554680] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.561158] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 0.561164] pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.561191] pci_bus 0000:00: on NUMA node 0
[ 0.561600] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.561661] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.561723] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.561785] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.561835] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 0.561874] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 0.561913] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 0.561952] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 0.562129] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.562131] vgaarb: loaded
[ 0.562132] vgaarb: bridge control possible 0000:01:00.0
[ 0.562199] PCI: Using ACPI for IRQ routing
[ 0.568239] PCI: pci_cache_line_size set to 64 bytes
[ 0.568297] e820: reserve RAM buffer [mem 0xbe479000-0xbfffffff]
[ 0.568299] e820: reserve RAM buffer [mem 0xbf156000-0xbfffffff]
[ 0.568300] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.568301] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.568393] NetLabel: Initializing
[ 0.568394] NetLabel: domain hash size = 128
[ 0.568395] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.568403] NetLabel: unlabeled traffic allowed by default
[ 0.568421] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.568424] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.570483] Switched to clocksource hpet
[ 0.575766] pnp: PnP ACPI init
[ 0.575778] ACPI: bus type PNP registered
[ 0.575861] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.575864] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.576131] system 00:01: [io 0x040b] has been reserved
[ 0.576133] system 00:01: [io 0x04d6] has been reserved
[ 0.576135] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.576137] system 00:01: [io 0x0c14] has been reserved
[ 0.576139] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.576140] system 00:01: [io 0x0c52] has been reserved
[ 0.576142] system 00:01: [io 0x0c6c] has been reserved
[ 0.576143] system 00:01: [io 0x0c6f] has been reserved
[ 0.576145] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.576146] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.576148] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.576149] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.576151] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.576152] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.576154] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.576155] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.576157] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.576158] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.576161] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.576163] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.576164] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.576166] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.576168] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.576170] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.576171] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.576173] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.576321] system 00:02: [io 0x0220-0x0227] has been reserved
[ 0.576323] system 00:02: [io 0x0228-0x0237] has been reserved
[ 0.576324] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 0.576326] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.576567] pnp 00:03: [dma 0 disabled]
[ 0.576607] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.576638] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.576696] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.576698] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.576738] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.576870] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.576873] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.576984] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.576986] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.577084] pnp: PnP ACPI: found 9 devices
[ 0.577085] ACPI: bus type PNP unregistered
[ 0.583607] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.583609] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.583612] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.583615] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.583617] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.583620] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.583623] pci 0000:00:0a.0: PCI bridge to [bus 03]
[ 0.583625] pci 0000:00:0a.0: bridge window [io 0xd000-0xdfff]
[ 0.583627] pci 0000:00:0a.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.583630] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 0.583633] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.583636] pci 0000:00:14.4: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.583642] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 0.583644] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 0.583648] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.583652] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 0.583655] pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.583661] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.583662] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.583664] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.583665] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.583667] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.583668] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.583669] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.583671] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.583672] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.583674] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.583675] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.583677] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.583678] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.583679] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.583681] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.583682] pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
[ 0.583683] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
[ 0.583685] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
[ 0.583686] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
[ 0.583687] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.583689] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.583690] pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.583691] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.583693] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.583694] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.583712] NET: Registered protocol family 2
[ 0.583938] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.584195] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.584374] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.584400] TCP: reno registered
[ 0.584418] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.584481] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.584565] NET: Registered protocol family 1
[ 0.897578] pci 0000:01:00.0: Boot video device
[ 0.897800] PCI: CLS 64 bytes, default 64
[ 0.897841] Unpacking initramfs...
[ 0.941783] Freeing initrd memory: 3344K (ffff880037968000 - ffff880037cac000)
[ 0.942188] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.942190] AMD-Vi: Interrupt remapping enabled
[ 0.942201] pci 0000:00:00.2: irq 72 for MSI/MSI-X
[ 0.951559] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.024248] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.024250] software IO TLB [mem 0xaf1e9000-0xb31e9000] (64MB) mapped at [ffff8800af1e9000-ffff8800b31e8fff]
[ 1.024572] perf: AMD NB counters detected
[ 1.024604] LVT offset 0 assigned for vector 0x400
[ 1.024621] perf: AMD IBS detected (0x000000ff)
[ 1.024650] Scanning for low memory corruption every 60 seconds
[ 1.024932] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.025237] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.026619] zbud: loaded
[ 1.026750] VFS: Disk quotas dquot_6.5.2
[ 1.026780] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.026884] msgmni has been set to 32023
[ 1.026932] Key type big_key registered
[ 1.027076] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.027132] io scheduler noop registered
[ 1.027135] io scheduler deadline registered
[ 1.027178] io scheduler cfq registered (default)
[ 1.027550] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.027565] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.027599] efifb: probing for efifb
[ 1.027612] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 3072k, total 3072k
[ 1.027613] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.027614] efifb: scrolling: redraw
[ 1.027616] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.029030] Console: switching to colour frame buffer device 128x48
[ 1.030367] fb0: EFI VGA frame buffer device
[ 1.030401] GHES: HEST is not enabled!
[ 1.030461] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.050975] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.051301] Linux agpgart interface v0.103
[ 1.051356] rtc_cmos 00:04: RTC can wake from S4
[ 1.051451] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.051471] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.051482] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.051563] TCP: cubic registered
[ 1.051655] NET: Registered protocol family 10
[ 1.051841] NET: Registered protocol family 17
[ 1.052378] registered taskstats version 1
[ 1.052749] Magic number: 14:373:841
[ 1.052809] rtc_cmos 00:04: setting system clock to 2014-09-13 15:50:05 UTC (1410623405)
[ 1.052867] PM: Hibernation image not present or could not be loaded.
[ 1.053656] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 1.053657] Write protecting the kernel read-only data: 8192k
[ 1.056084] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 1.057138] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 1.062472] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 1.063544] systemd-udevd[78]: starting version 216
[ 1.073335] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.073734] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.073851] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.078163] ACPI: bus type USB registered
[ 1.078200] usbcore: registered new interface driver usbfs
[ 1.078224] usbcore: registered new interface driver hub
[ 1.078273] usbcore: registered new device driver usb
[ 1.078380] SCSI subsystem initialized
[ 1.079117] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079174] QUIRK: Enable AMD PLL fix
[ 1.079192] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.079198] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.079307] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 1.079649] ehci-pci: EHCI PCI platform driver
[ 1.079717] hub 1-0:1.0: USB hub found
[ 1.079729] hub 1-0:1.0: 2 ports detected
[ 1.079853] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.079907] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.079911] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.079923] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.080103] hub 2-0:1.0: USB hub found
[ 1.080117] hub 2-0:1.0: 2 ports detected
[ 1.080209] ohci-pci: OHCI PCI platform driver
[ 1.080301] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.080307] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.080317] ehci-pci 0000:00:12.2: debug port 1
[ 1.080361] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.080852] libata version 3.00 loaded.
[ 1.081208] firewire_ohci 0000:04:0e.0: enabling device (0000 -> 0003)
[ 1.087523] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.087728] hub 3-0:1.0: USB hub found
[ 1.087733] hub 3-0:1.0: 5 ports detected
[ 1.087965] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.087974] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 4
[ 1.088105] xhci_hcd 0000:06:00.0: irq 74 for MSI/MSI-X
[ 1.088354] hub 4-0:1.0: USB hub found
[ 1.088364] hub 4-0:1.0: 2 ports detected
[ 1.088543] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.088547] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 1.088556] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.088733] hub 5-0:1.0: USB hub found
[ 1.088745] hub 5-0:1.0: 2 ports detected
[ 1.088893] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 1.088898] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.088909] ehci-pci 0000:00:13.2: debug port 1
[ 1.088944] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[ 1.097566] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.097722] hub 6-0:1.0: USB hub found
[ 1.097727] hub 6-0:1.0: 5 ports detected
[ 1.097952] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.097956] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 1.097959] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.097967] ehci-pci 0000:00:16.2: debug port 1
[ 1.097989] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[ 1.107583] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.107716] hub 7-0:1.0: USB hub found
[ 1.107722] hub 7-0:1.0: 4 ports detected
[ 1.107947] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.107957] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 1.107987] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.140955] firewire_ohci 0000:04:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.165110] hub 8-0:1.0: USB hub found
[ 1.165118] hub 8-0:1.0: 5 ports detected
[ 1.165325] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.165329] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[ 1.165345] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[ 1.221830] hub 9-0:1.0: USB hub found
[ 1.221837] hub 9-0:1.0: 5 ports detected
[ 1.222037] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.222041] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[ 1.222062] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.278505] hub 10-0:1.0: USB hub found
[ 1.278512] hub 10-0:1.0: 2 ports detected
[ 1.278669] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.278673] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[ 1.278689] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[ 1.335208] hub 11-0:1.0: USB hub found
[ 1.335215] hub 11-0:1.0: 4 ports detected
[ 1.336280] scsi0 : pata_atiixp
[ 1.336383] scsi1 : pata_atiixp
[ 1.336425] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.336426] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.336452] ahci 0000:00:11.0: version 3.0
[ 1.336641] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.336644] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.337186] scsi2 : ahci
[ 1.337290] scsi3 : ahci
[ 1.337390] scsi4 : ahci
[ 1.337489] scsi5 : ahci
[ 1.337536] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[ 1.337538] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[ 1.337540] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[ 1.337542] ata6: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[ 1.337639] ahci 0000:03:00.0: irq 75 for MSI/MSI-X
[ 1.337690] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.337692] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.337976] scsi6 : ahci
[ 1.338071] scsi7 : ahci
[ 1.338118] ata7: SATA max UDMA/133 abar m512@0xfe810000 port 0xfe810100 irq 75
[ 1.338120] ata8: SATA max UDMA/133 abar m512@0xfe810000 port 0xfe810180 irq 75
[ 1.404457] usb 6-3: new high-speed USB device number 2 using ehci-pci
[ 1.528756] hub 6-3:1.0: USB hub found
[ 1.528828] hub 6-3:1.0: 2 ports detected
[ 1.641324] firewire_core 0000:04:0e.0: created device fw0: GUID 0049e5505c270b00, S400
[ 1.651272] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.651281] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.657940] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.808118] usb 6-3.2: new full-speed USB device number 3 using ehci-pci
[ 1.814717] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.821376] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.821385] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 1.821388] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.821404] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.821948] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.821950] ata4.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[ 1.821952] ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.822245] ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.822309] ata4.00: configured for UDMA/133
[ 1.824354] ata5.00: HPA detected: current 153356490, native 156301488
[ 1.824357] ata5.00: ATA-7: ST98823AS, 8.03, max UDMA/133
[ 1.824358] ata5.00: 153356490 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.828060] ata5.00: configured for UDMA/133
[ 1.828343] ata3.00: configured for UDMA/133
[ 1.828450] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P AB51 PQ: 0 ANSI: 5
[ 1.828688] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
[ 1.828856] scsi 4:0:0:0: Direct-Access ATA ST98823AS 8.03 PQ: 0 ANSI: 5
[ 1.833290] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.833293] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 1.833322] sd 2:0:0:0: [sda] Write Protect is off
[ 1.833324] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.833329] sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.833336] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.833374] sd 4:0:0:0: [sdc] 153356490 512-byte logical blocks: (78.5 GB/73.1 GiB)
[ 1.833375] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.833377] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.833389] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.833472] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.833475] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.833497] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.836993] sdb: sdb1 sdb2
[ 1.837214] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.895793] sda: sda1 sda2 sda3 sda4
[ 1.896104] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.910317] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.915872] usbcore: registered new interface driver usbhid
[ 1.915874] usbhid: USB HID core driver
[ 1.918192] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.2-3.2/input2
[ 1.974047] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:13.2/usb6/6-3/6-3.2/6-3.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input2
[ 1.974106] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:13.2-3.2:1
[ 1.976117] input: Logitech Unifying Device. Wireless PID:4003 as /devices/pci0000:00/0000:00:13.2/usb6/6-3/6-3.2/6-3.2:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input3
[ 1.976180] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4003] on usb-0000:00:13.2-3.2:2
[ 1.977838] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_raw_event: invalid device index:0
[ 2.028179] tsc: Refined TSC clocksource calibration: 4018.433 MHz
[ 2.129191] sdc: sdc1 sdc2 sdc3 sdc4
[ 2.129599] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.580104] random: nonblocking pool is initialized
[ 2.751962] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.028924] Switched to clocksource tsc
[ 4.554403] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.586571] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 4.984299] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 5.288918] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 5.288921] ACPI: Power Button [PWRB]
[ 5.288965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.288967] ACPI: Power Button [PWRF]
[ 5.292242] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 5.292243] AMD IOMMUv2 functionality not available on this system
[ 5.446139] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.446143] Disabling lock debugging due to kernel taint
[ 5.469723] <6>[fglrx] Maximum main memory to use for locked dma buffers: 15640 MBytes.
[ 5.470019] <6>[fglrx] vendor: 1002 device: 6818 count: 1
[ 5.470246] <6>[fglrx] IOMMU is enabled, CrossFire are not supported on this platform
[ 5.470247] <6>[fglrx] Disable IOMMU in BIOS options or kernel boot parameters to support CF
[ 5.470560] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 5.470858] <6>[fglrx] Kernel PAT support is enabled
[ 5.470873] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 1 minors
[ 5.630378] systemd-udevd[224]: starting version 216
[ 6.139613] ACPI: acpi_idle registered with cpuidle
[ 6.321300] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.325690] wmi: Mapper loaded
[ 6.354951] MCE: In-kernel MCE decoding enabled.
[ 6.368584] acpi-cpufreq: overriding BIOS provided _PSD data
[ 6.457070] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 6.457109] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 6.470489] EDAC MC: Ver: 3.0.0
[ 6.504180] [drm] Initialized drm 1.1.0 20060810
[ 6.529062] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.618293] microcode: CPU0: patch_level=0x06000803
[ 6.683571] [drm] VGACON disable radeon kernel modesetting.
[ 6.683574] [drm:radeon_init] *ERROR* No UMS support in radeon module!
[ 6.723101] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 6.723177] sp5100_tco: PCI Revision ID: 0x42
[ 6.723213] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[ 6.723224] sp5100_tco: Last reboot was not triggered by watchdog.
[ 6.723293] sp5100_tco: initialized (0xffffc900018fcb00). heartbeat=60 sec (nowayout=0)
[ 6.765499] AMD64 EDAC driver v3.4.0
[ 6.765551] EDAC amd64: DRAM ECC disabled.
[ 6.765567] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 6.790562] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.790572] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.790827] r8169 0000:05:00.0: irq 76 for MSI/MSI-X
[ 6.791043] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018d6000, 94:de:80:27:4d:81, XID 0c900800 IRQ 76
[ 6.791046] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.802366] microcode: CPU0: new patch_level=0x06000822
[ 6.802384] microcode: CPU1: patch_level=0x06000803
[ 6.802399] microcode: CPU2: patch_level=0x06000803
[ 6.818730] microcode: CPU2: new patch_level=0x06000822
[ 6.818746] microcode: CPU3: patch_level=0x06000803
[ 6.818754] microcode: CPU4: patch_level=0x06000803
[ 6.825510] microcode: CPU4: new patch_level=0x06000822
[ 6.825761] microcode: CPU5: patch_level=0x06000803
[ 6.825771] microcode: CPU6: patch_level=0x06000803
[ 6.831378] microcode: CPU6: new patch_level=0x06000822
[ 6.831392] microcode: CPU7: patch_level=0x06000803
[ 6.831477] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 6.831823] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 6.831874] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 6.831876] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 6.831911] snd_hda_intel 0000:01:00.1: irq 77 for MSI/MSI-X
[ 6.884905] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.884914] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.884919] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.884923] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.884927] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.884931] sound hdaudioC0D0: inputs:
[ 6.884935] sound hdaudioC0D0: Front Mic=0x19
[ 6.884940] sound hdaudioC0D0: Rear Mic=0x18
[ 6.884944] sound hdaudioC0D0: Line=0x1a
[ 6.905483] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[ 6.905650] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9
[ 6.905812] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 6.905981] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 6.906139] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 6.906289] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 6.910544] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 6.910791] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 6.911362] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 6.912297] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 6.913500] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 6.914793] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 6.916540] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 6.917416] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 6.990382] systemd-udevd[233]: renamed network interface eth0 to enp5s0
[ 7.131198] AVX version of gcm_enc/dec engaged.
[ 7.342053] mousedev: PS/2 mouse device common for all mice
[ 7.350065] kvm: Nested Virtualization enabled
[ 7.350070] kvm: Nested Paging enabled
[ 7.835639] Adding 8388604k swap on /dev/sda2. Priority:-1 extents:1 across:8388604k FS
[ 8.675105] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.759627] systemd-journald[197]: Received request to flush runtime journal from PID 1
[ 8.948735] systemd-journald[197]: File /var/log/journal/f988a9735ede400cac73a950e0bdcd3b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 9.314345] it87: Found IT8728F chip at 0x228, revision 1
[ 9.314365] it87: Beeping is supported
[ 12.110524] r8169 0000:05:00.0 enp5s0: link down
[ 12.110565] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 12.110665] r8169 0000:05:00.0 enp5s0: link down
[ 14.092316] r8169 0000:05:00.0 enp5s0: link up
[ 14.092332] IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[ 438.935898] fglrx_pci 0000:01:00.0: irq 78 for MSI/MSI-X
[ 438.936725] <6>[fglrx] Firegl kernel thread PID: 837
[ 438.936806] <6>[fglrx] Firegl kernel thread PID: 838
[ 438.936885] <6>[fglrx] Firegl kernel thread PID: 839
[ 438.936975] <6>[fglrx] IRQ 78 Enabled
[ 438.947447] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 438.947449] <6>[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[ 438.947451] <6>[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[ 438.947452] <6>[fglrx] Reserved FB block: Unshared offset:7ffef000, size:11000
[ 487.247271] SysRq : SAK
[ 487.247357] SAK: killed process 835 (Xorg.bin): task_session(p)==tty->session
[ 487.247554] SAK: killed process 835 (Xorg.bin): task_session(p)==tty->sessionOffline
#6707 2014-09-14 13:11:28
- Vi0L0
- Member
- From: Poland
- Registered: 2009-06-24
- Posts: 1,349
- Website
Re: The AMD/ATI Bar & Grill
@revberaldo:
looks like you got some pxp capable hadrware, don't you? pxp users noted that xorg-server 1.16 doesn't work for them. Probably becase the last intel driver which works for them is xf86-video-intel 2.99.910-1. I put this version into [xorg115] repo, check it out now.
retr0virus wrote:
With catalyst-test 14.9-10 the Xorg.0.log still is created at /var/log/ instead of .local/share/xorg/. With the open source driver it is created in the latter directory
Note that rootless X doesn't work on blobs.
If oss radeon was working well on 1.16, that most probably means that there's no problem with keyboard/mouse drivers (&& fglrx is messing some things).
Does this catalyst version work good for you on xserver 1.15? Can you check single monitor setup (maybe there's some multihead bug inside fglrx)?
Offline
#6708 2014-09-15 22:42:51
- revberaldo
- Member
- From: Campinas, Brazil
- Registered: 2009-09-18
- Posts: 49
- Website
Re: The AMD/ATI Bar & Grill
Vi0L0 wrote:
@revberaldo:
looks like you got some pxp capable hadrware, don't you? pxp users noted that xorg-server 1.16 doesn't work for them. Probably becase the last intel driver which works for them is xf86-video-intel 2.99.910-1. I put this version into [xorg115] repo, check it out now.
Thanks! Unfortunately, that didn't work. I upgraded to Xorg 1.15 and, although X works when I change to the Intel card (pxp_switch_catalyst intel), it fails to load when I enable the ATI card. The card's a Radeon R7 M260 (my guess is it isn't supported as it's kind of recent). Here's my /var/log/Xorg.0.log:
[ 122.061]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 122.065] X Protocol Version 11, Revision 0
[ 122.066] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 122.068] Current Operating System: Linux derpy 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 122.068] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw quiet splash
[ 122.070] Build Date: 27 June 2014 07:32:26PM
[ 122.072]
[ 122.073] Current version of pixman: 0.32.6
[ 122.076] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 122.076] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 122.081] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 15 19:33:49 2014
[ 122.083] (==) Using config file: "/etc/X11/xorg.conf"
[ 122.084] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 122.085] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 122.085] (==) ServerLayout "aticonfig Layout"
[ 122.085] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 122.085] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 122.085] (**) | |-->Device "aticonfig-Device[0]-0"
[ 122.085] (==) Automatically adding devices
[ 122.085] (==) Automatically enabling devices
[ 122.085] (==) Automatically adding GPU devices
[ 122.085] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 122.085] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 122.085] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 122.085] (II) Loader magic: 0x811cc0
[ 122.085] (II) Module ABI versions:
[ 122.085] X.Org ANSI C Emulation: 0.4
[ 122.085] X.Org Video Driver: 15.0
[ 122.085] X.Org XInput driver : 20.0
[ 122.085] X.Org Server Extension : 8.0
[ 122.085] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 122.086] (--) PCI:*(0:0:2:0) 8086:0a16:1028:0640 rev 11, Mem @ 0xb0400000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[ 122.086] (--) PCI: (0:3:0:0) 1002:6900:1028:0640 rev 0, Mem @ 0xa0000000/268435456, 0xb0000000/2097152, 0xb0900000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 122.086] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 122.087] Initializing built-in extension Generic Event Extension
[ 122.088] Initializing built-in extension SHAPE
[ 122.088] Initializing built-in extension MIT-SHM
[ 122.089] Initializing built-in extension XInputExtension
[ 122.090] Initializing built-in extension XTEST
[ 122.091] Initializing built-in extension BIG-REQUESTS
[ 122.092] Initializing built-in extension SYNC
[ 122.092] Initializing built-in extension XKEYBOARD
[ 122.093] Initializing built-in extension XC-MISC
[ 122.094] Initializing built-in extension SECURITY
[ 122.095] Initializing built-in extension XINERAMA
[ 122.096] Initializing built-in extension XFIXES
[ 122.096] Initializing built-in extension RENDER
[ 122.097] Initializing built-in extension RANDR
[ 122.098] Initializing built-in extension COMPOSITE
[ 122.098] Initializing built-in extension DAMAGE
[ 122.099] Initializing built-in extension MIT-SCREEN-SAVER
[ 122.100] Initializing built-in extension DOUBLE-BUFFER
[ 122.100] Initializing built-in extension RECORD
[ 122.101] Initializing built-in extension DPMS
[ 122.102] Initializing built-in extension Present
[ 122.102] Initializing built-in extension DRI3
[ 122.103] Initializing built-in extension X-Resource
[ 122.104] Initializing built-in extension XVideo
[ 122.104] Initializing built-in extension XVideo-MotionCompensation
[ 122.105] Initializing built-in extension XFree86-VidModeExtension
[ 122.106] Initializing built-in extension XFree86-DGA
[ 122.106] Initializing built-in extension XFree86-DRI
[ 122.107] Initializing built-in extension DRI2
[ 122.107] (II) "glx" will be loaded by default.
[ 122.107] (II) LoadModule: "glx"
[ 122.107] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[ 122.107] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 122.107] compiled for 6.9.0, module version = 1.0.0
[ 122.108] Loading extension GLX
[ 122.108] (II) LoadModule: "fglrx"
[ 122.108] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 122.119] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 122.119] compiled for 1.4.99.906, module version = 14.20.7
[ 122.119] Module class: X.Org Video Driver
[ 122.119] (II) Loading sub module "fglrxdrm"
[ 122.119] (II) LoadModule: "fglrxdrm"
[ 122.119] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 122.119] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 122.119] compiled for 1.4.99.906, module version = 14.20.7
[ 122.119] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 122.119] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002
[ 122.119] (II) AMD Proprietary Linux Driver Build Date: Sep 2 2014 10:14:55
[ 122.119] (++) using VT number 1
[ 122.119] (WW) Falling back to old probe method for fglrx
[ 122.122] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 122.123] ukiDynamicMajor: found major device number 250
[ 122.123] ukiDynamicMajor: found major device number 250
[ 122.123] ukiOpenByBusid: Searching for BusID PCI:3:0:0
[ 122.123] ukiOpenDevice: node name is /dev/ati/card0
[ 122.123] ukiOpenDevice: open result is 9, (OK)
[ 122.123] ukiOpenByBusid: ukiOpenMinor returns 9
[ 122.123] ukiOpenByBusid: ukiGetBusid reports PCI:3:0:0
[ 122.194] (--) Chipset Supported AMD Graphics Processor (0x6900) found
[ 122.195] (II) fglrx: intel VGA device detected, load intel driver.
[ 122.195] (II) LoadModule: "intel"
[ 122.195] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 122.195] (II) Module intel: vendor="X.Org Foundation"
[ 122.195] compiled for 1.15.0, module version = 2.99.910
[ 122.195] Module class: X.Org Video Driver
[ 122.195] ABI class: X.Org Video Driver, version 15.0
[ 122.196] (II) fglrx(0): pEnt->device->identifier=0x13c4de0
[ 122.196] (II) intel(1): pEnt->device->identifier=(nil)
[ 122.196] (EE) Screen 1 deleted because of no matching config section.
[ 122.196] (II) UnloadModule: "intel"
[ 122.196] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[ 122.196] (II) fglrx(0): PowerXpress: Integrated GPU is selected.
[ 122.200] (EE) fglrx(0): Active libglx doesn't match current PX setting.
[ 122.204] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibglx:
Switch to Intel
[ 122.208] (EE) fglrx(0): PowerXpress: Fail to switch libGL link files.
[ 122.208] (WW) fglrx(0): Quitting screen -- PreInit PowerXpress failed.
[ 122.208] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === end
[ 122.208] (II) UnloadModule: "fglrx"
[ 122.209] (II) UnloadSubModule: "fglrxdrm"
[ 122.209] (EE) Screen(s) found, but none have a usable configuration.
[ 122.209] (EE)
Fatal server error:
[ 122.209] (EE) no screens found(EE)
[ 122.209] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 122.209] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 122.209] (EE)
[ 122.214] (EE) Server terminated with error (1). Closing log file.My xorg.conf, generated with aticonfig --initial --adapter=all:
Section "InputClass"
Identifier "touchpad"
Driver "synaptics"
MatchIsTouchpad "on"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertTwoFingerScroll" "on"
Option "HorizTwoFingerScroll" "on"
Option "VertScrollDelta" "-30"
Option "HorizScrollDelta" "-30"
EndSection
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:3:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionI also posted more information on this thread previously.
Offline
#6709 2014-09-16 16:38:30
- irenicus09
- Member
- Registered: 2014-08-30
- Posts: 8
Re: The AMD/ATI Bar & Grill
Hello,
I have a hybrid graphics with both intel and radeon card supporting dynamic power management options. My discrete card is Radeon HD 8750m.
So far it's been nearly 2 years since I bought my laptop yet I'm unable to make my discrete card work with any driver no matter what I tried, Opensource / Closed source - Nothing works!
I've followed the steps in Arch wiki also posted a thread in Arch forums to resolve my issue but as of yet nothing fixed my issue.
Please, if you have the time / resources...I'd be grateful if you'd kindly look into my thread over here : https://bbs.archlinux.org/viewtopic.php … 0#p1457230
I'm willing to do whatever is necessary to get this thing working, I paid a premium price for this laptop just because of the high end discrete card...and it's been a total waste so far.
Thanks,
Irenicus09
Offline
#6710 2014-09-16 20:46:53
- Vi0L0
- Member
- From: Poland
- Registered: 2009-06-24
- Posts: 1,349
- Website
Re: The AMD/ATI Bar & Grill
@revberaldo:
how are you switching to amd?
Check this commands:
/usr/lib64/fglrx/switchlibGL query
/usr/lib64/fglrx/switchlibglx query
aticonfig --pxlThey will give you answers about which gpu is selected.
Edit: Omg, I assumed that you are using catalyst-test/catalyst-libgl, which also comes with experimental pxp support, and not direct - pxp packages (which I'm planning to drop btw)... Sorry for a possible mistake, let's clarify :
1. for "normal" catalyst packages with experimental pxp support like catalyst-test:
readlink /usr/lib/libGL.so
readlink /usr/lib/xorg/modules/extensions/libglx.soFor AMD(Catalyst) links should point to:
$ readlink /usr/lib/libGL.so
/usr/lib/fglrx/fglrx-libGL.so.1.2
$ readlink /usr/lib/xorg/modules/extensions/libglx.so
/usr/lib/xorg/modules/extensions/fglrx/fglrx-libglx.so2. for -pxp packages like catalyst-test-pxp, catalyst-total-pxp or catalyst-utils-pxp(repo):
readlink /usr/lib/catalystpxp/libGL.so.1.2
readlink /usr/lib/xorg/modules/updates/extensions/libglx.soFor AMD(Catalyst) links should point to:
$ readlink /usr/lib/catalystpxp/libGL.so.1.2
/usr/lib/catalystpxp/fglrx/fglrx-libGL.so.1.2
$ readlink /usr/lib/xorg/modules/updates/extensions/libglx.so
/usr/lib/xorg/modules/updates/extensions/fglrx/fglrx-libglx.so@irenicus09:
could you paste Xorg.0.log ?
Also your /etc/modules-load.d/catalyst.conf is missing, it's better to cut fglrx from it when using intel than removing it (file)
BTW:
Valve Begins Publicly Tracking AMD Catalyst Linux Issues
Last edited by Vi0L0 (2014-09-17 15:14:11)
Offline
#6711 2014-09-17 17:17:46
- revberaldo
- Member
- From: Campinas, Brazil
- Registered: 2009-09-18
- Posts: 49
- Website
Re: The AMD/ATI Bar & Grill
Vi0L0 wrote:
@revberaldo:
how are you switching to amd?
Check this commands:/usr/lib64/fglrx/switchlibGL query /usr/lib64/fglrx/switchlibglx query aticonfig --pxlThey will give you answers about which gpu is selected.
Edit: Omg, I assumed that you are using catalyst-test/catalyst-libgl, which also comes with experimental pxp support, and not direct - pxp packages (which I'm planning to drop btw)... Sorry for a possible mistake, let's clarify :
1. for "normal" catalyst packages with experimental pxp support like catalyst-test:readlink /usr/lib/libGL.so readlink /usr/lib/xorg/modules/extensions/libglx.soFor AMD(Catalyst) links should point to:
$ readlink /usr/lib/libGL.so /usr/lib/fglrx/fglrx-libGL.so.1.2 $ readlink /usr/lib/xorg/modules/extensions/libglx.so /usr/lib/xorg/modules/extensions/fglrx/fglrx-libglx.so2. for -pxp packages like catalyst-test-pxp, catalyst-total-pxp or catalyst-utils-pxp(repo):
readlink /usr/lib/catalystpxp/libGL.so.1.2 readlink /usr/lib/xorg/modules/updates/extensions/libglx.soFor AMD(Catalyst) links should point to:
$ readlink /usr/lib/catalystpxp/libGL.so.1.2 /usr/lib/catalystpxp/fglrx/fglrx-libGL.so.1.2 $ readlink /usr/lib/xorg/modules/updates/extensions/libglx.so /usr/lib/xorg/modules/updates/extensions/fglrx/fglrx-libglx.soBTW:
Valve Begins Publicly Tracking AMD Catalyst Linux Issues
Hi Vi0L0,
Inexplicably, it's working now. I was changing my GPU with
pxp_switch_catalyst amd. I rebooted my computer this morning, ran that command and now I'm using Gnome with my ATI card. The packages I have installed are:
$ pacman -Q | grep catalyst
catalyst-hook 14.9-10
catalyst-utils-pxp 14.9-10
lib32-catalyst-utils-pxp 14.9-10As for the symlinks (readlink didn't print the full path to the files, I read the man pages and there's nothing about that):
$ readlink /usr/lib/libGL.so
libGL.so.1.2.0
$ readlink /usr/lib/xorg/modules/extensions/libglx.so
libglx.xorgI can see a lot of tearing and slowness when I move windows around in Gnome. The performance of Dota 2 is better than before, but I can notice some annoying "hiccups". It feels like frames are being skipped every few seconds. Here's a video of me moving a window around (look at the bottom left corner) and resizing it: https://www.youtube.com/watch?v=oNUY5VhUE64
I tried enabling vsync in the Catalyst Control Center, but that option is greyed out.
Thanks for the help so far! I'll check out Valve's bugtracker, that's very cool!
Offline
#6712 2014-09-17 18:43:44
- Cory_j
- Member
- From: USA
- Registered: 2012-02-16
- Posts: 39
Re: The AMD/ATI Bar & Grill
So it looks like Valve is unhappy with AMD too so maybe we will get some better drivers
Arch Mint Winfail7
Offline
#6713 2014-09-17 20:21:41
- revberaldo
- Member
- From: Campinas, Brazil
- Registered: 2009-09-18
- Posts: 49
- Website
Re: The AMD/ATI Bar & Grill
Cory_j wrote:
So it looks like Valve is unhappy with AMD too so maybe we will get some better drivers
Maybe we need Linus to give them the finger as well...
Offline
#6714 2014-09-17 20:49:29
- Vi0L0
- Member
- From: Poland
- Registered: 2009-06-24
- Posts: 1,349
- Website
Re: The AMD/ATI Bar & Grill
revberaldo wrote:
I can see a lot of tearing and slowness when I move windows around in Gnome. The performance of Dota 2 is better than before, but I can notice some annoying "hiccups". It feels like frames are being skipped every few seconds. Here's a video of me moving a window around (look at the bottom left corner) and resizing it: https://www.youtube.com/watch?v=oNUY5VhUE64
I tried enabling vsync in the Catalyst Control Center, but that option is greyed out.
tear + slowness? doesn't sound good...
Normally I would suggest:
- amdccle -> Tear Free Enabled, V-Sync always off
- 'export CLUTTER_VBLANK=none' inside profile
should do the job for slowness while beeing tearless, but why you don't see v-sync? dunno, weird thing
revberaldo wrote:
Cory_j wrote:So it looks like Valve is unhappy with AMD too so maybe we will get some better drivers
Maybe we need Linus to give them the finger as well...
Naaah, don't forget that AMD is doing great job on oss drivers.
Offline
#6715 2014-09-17 21:03:56
- hippieben
- Member
- Registered: 2013-10-27
- Posts: 218
Re: The AMD/ATI Bar & Grill
Vi0L0 wrote:
Naaah, don't forget that AMD is doing great job on oss drivers.
Have the OSS drivers improved recently to the point that they would be worth giving another shot in the next kernel version?
Offline
#6716 2014-09-17 22:10:33
- revberaldo
- Member
- From: Campinas, Brazil
- Registered: 2009-09-18
- Posts: 49
- Website
Re: The AMD/ATI Bar & Grill
Vi0L0 wrote:
revberaldo wrote:I can see a lot of tearing and slowness when I move windows around in Gnome. The performance of Dota 2 is better than before, but I can notice some annoying "hiccups". It feels like frames are being skipped every few seconds. Here's a video of me moving a window around (look at the bottom left corner) and resizing it: https://www.youtube.com/watch?v=oNUY5VhUE64
I tried enabling vsync in the Catalyst Control Center, but that option is greyed out.
tear + slowness? doesn't sound good...
Normally I would suggest:
- amdccle -> Tear Free Enabled, V-Sync always off
- 'export CLUTTER_VBLANK=none' inside profile
should do the job for slowness while beeing tearless, but why you don't see v-sync? dunno, weird thing
That's what I see: image of the Catalyst Control Center.
Offline
#6717 2014-09-17 23:43:10
- hippieben
- Member
- Registered: 2013-10-27
- Posts: 218
Re: The AMD/ATI Bar & Grill
revberaldo wrote:
Vi0L0 wrote:revberaldo wrote:I can see a lot of tearing and slowness when I move windows around in Gnome. The performance of Dota 2 is better than before, but I can notice some annoying "hiccups". It feels like frames are being skipped every few seconds. Here's a video of me moving a window around (look at the bottom left corner) and resizing it: https://www.youtube.com/watch?v=oNUY5VhUE64
I tried enabling vsync in the Catalyst Control Center, but that option is greyed out.
tear + slowness? doesn't sound good...
Normally I would suggest:
- amdccle -> Tear Free Enabled, V-Sync always off
- 'export CLUTTER_VBLANK=none' inside profile
should do the job for slowness while beeing tearless, but why you don't see v-sync? dunno, weird thingThat's what I see: image of the Catalyst Control Center.
What happens of you click the + next to "current system settings"?
Offline
#6718 2014-09-18 10:06:24
- Vi0L0
- Member
- From: Poland
- Registered: 2009-06-24
- Posts: 1,349
- Website
Re: The AMD/ATI Bar & Grill
hippieben wrote:
Vi0L0 wrote:Naaah, don't forget that AMD is doing great job on oss drivers.
Have the OSS drivers improved recently to the point that they would be worth giving another shot in the next kernel version?
2 weeks ago I checked oss on my r290x and opengl performance was poor. ATM im unable to check other gpus, but afaik older cards (especially hd6k series) should work very good.
Maybe today i will retest how does oss work atm.
edit: so after two weeks its better, opengl performance went up (warsow's fps is jumping between 40 and 60frames; heaven and valley looked good, no glitches, but 4-5fps - all @ 2560x1440), kwin works faster. But still there's some lagg on the cursor, less frequent but same in a type. It's harder to notice on kwin - here its happening from time to time (but always during window resize), but it hurts in warsow - here fps drops from 60 to 40 in every second for a half of the second while moving mouse, while using only keyboard to move its fine, no drop - so its gotta be something with the mouse. Normally I would blame xorg and lets say evdev driver, but its working well on catalyst...
It's possible that cursor lagg won't happen on smaller resolution. But here I can feel it, and my brain can't stand it, the cursor has to be in the place where I moved it, always. For now I will get back to catalyst, tell devs about the bug, and retest radeonsi after another 2 weeks.
So radeonsi @ hawaii isn't that good, at least for me. It's much better than 2 weeks ago, though, it's future should be clear.
Is oss worth giving another try? I would say "why not?" It's taking only minutes to switch to it and [mesa-git] repo. Costs almost nothing and could be a nice surprise.
revberaldo wrote:
That's what I see: image of the Catalyst Control Center.
Run without sudo, as normal logged to DE user.
sudo should be needed mainly if making changes to xorg.conf like screen setup etc, not vsync.
Maybe this way it would work
Last edited by Vi0L0 (2014-09-18 18:25:05)
Offline
#6719 2014-09-19 03:52:23
- hippieben
- Member
- Registered: 2013-10-27
- Posts: 218
Re: The AMD/ATI Bar & Grill
Why do you recommend mesa-git over the standard mesa?
Offline
#6720 2014-09-19 04:11:46
- Vi0L0
- Member
- From: Poland
- Registered: 2009-06-24
- Posts: 1,349
- Website
Re: The AMD/ATI Bar & Grill
Because it brings latest: drivers, fixes, features. Sometimes you can get only glitches on standard mesa and full, beauty graphics on mesa-git
Offline
#6721 2014-09-19 20:55:36
- revberaldo
- Member
- From: Campinas, Brazil
- Registered: 2009-09-18
- Posts: 49
- Website
Re: The AMD/ATI Bar & Grill
hippieben wrote:
What happens of you click the + next to "current system settings"?
It shows a file input dialog! I assume you can load your own xorg.conf that way.
Vi0L0 wrote:
Run without sudo, as normal logged to DE user.
sudo should be needed mainly if making changes to xorg.conf like screen setup etc, not vsync.
Maybe this way it would work
That didn't work
Would installing mesa-git help?
Offline
#6722 2014-09-20 03:39:16
- hippieben
- Member
- Registered: 2013-10-27
- Posts: 218
Re: The AMD/ATI Bar & Grill
Vi0L0 wrote:
Because it brings latest: drivers, fixes, features. Sometimes you can get only glitches on standard mesa and full, beauty graphics on mesa-git
seems to be working well! All issues I had with oss drivers seem to be gone now.
Offline
#6723 2014-09-21 16:55:39
- retr0virus
- Member
- From: germany
- Registered: 2011-08-20
- Posts: 4
Re: The AMD/ATI Bar & Grill
Ok Vi0L0, I tried today with single monitor and again with dual monitor.
This time there were no problems at all... I went through aticonfig --initial=dual-head and amdccle and everything worked fine. (I thought I did that last time too...)
Offline
#6724 2014-09-24 16:16:20
- pandev93
- Member
- Registered: 2013-04-25
- Posts: 11
Re: The AMD/ATI Bar & Grill
Vi0L0 wrote:
revberaldo wrote:I can see a lot of tearing and slowness when I move windows around in Gnome. The performance of Dota 2 is better than before, but I can notice some annoying "hiccups". It feels like frames are being skipped every few seconds. Here's a video of me moving a window around (look at the bottom left corner) and resizing it: https://www.youtube.com/watch?v=oNUY5VhUE64
I tried enabling vsync in the Catalyst Control Center, but that option is greyed out.
tear + slowness? doesn't sound good...
Normally I would suggest:
- amdccle -> Tear Free Enabled, V-Sync always off
- 'export CLUTTER_VBLANK=none' inside profile
should do the job for slowness while beeing tearless, but why you don't see v-sync? dunno, weird thingrevberaldo wrote:Cory_j wrote:So it looks like Valve is unhappy with AMD too so maybe we will get some better drivers
Maybe we need Linus to give them the finger as well...
Naaah, don't forget that AMD is doing great job on oss drivers.
God job? I can't use the oss driver since 3.10, https://bugzilla.kernel.org/show_bug.cgi?id=83861
Offline
#6725 2014-09-24 18:15:45
- ChemBro
- Member
- Registered: 2008-10-22
- Posts: 703
Re: The AMD/ATI Bar & Grill
pandev93 wrote:
God job? I can't use the oss driver since 3.10, https://bugzilla.kernel.org/show_bug.cgi?id=83861
That is a bug report from today. How are they supposed to fix it so fast?
Offline