You are not logged in.
I have a tablet PC, and recently upgraded to xserver 1.6. X would freeze on startup roughly 50% of the time until (based on this thread) I removed xorg.conf (except for DontZap). Now X doesn't freeze on start, but the tablet is only being partially detected.
I can use it to move the cursor fine. The eraser does not work.
'xsetwacom list dev' does not detect any devices. This means I can't get or set any properties, recalibrate, rotate, or any other goodies.
output of 'xinput list' seems to indicate that it's being set up as some kind of generic plug-and-play device.
"Virtual core pointer" id=0 [XPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 0
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 0
"Virtual core keyboard" id=1 [XKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"TPPS/2 IBM TrackPoint" id=2 [XExtensionPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
"ThinkPad Extra Buttons" id=3 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"PnP Device (WACf008)" id=4 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
Num_buttons is 32
Num_axes is 6
Mode is Absolute
Motion_buffer is 256
Axis 0 :
Min_value is 0
Max_value is 24576
Resolution is 2540
Axis 1 :
Min_value is 0
Max_value is 18432
Resolution is 2540
Axis 2 :
Min_value is 0
Max_value is 255
Resolution is 1
Axis 3 :
Min_value is -64
Max_value is 63
Resolution is 1
Axis 4 :
Min_value is -64
Max_value is 63
Resolution is 1
Axis 5 :
Min_value is 0
Max_value is 1023
Resolution is 1
"AT Translated Set 2 keyboard" id=5 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255
"Macintosh mouse button emulation" id=6 [XExtensionPointer]
Num_buttons is 32
Num_axes is 2
Mode is Relative
Motion_buffer is 256
Axis 0 :
Min_value is -1
Max_value is -1
Resolution is 1
Axis 1 :
Min_value is -1
Max_value is -1
Resolution is 1
"Video Bus" id=7 [XExtensionKeyboard]
Num_keys is 248
Min_keycode is 8
Max_keycode is 255Here's Xorg.0.log. This used to have separate sections for Stylus/Eraser/Cursor all being set up.
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux malachite 2.6.29-ARCH #1 SMP PREEMPT Fri Apr 17 12:46:01 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 23 16:07:36 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(**) Option "DontZap" "no"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8100000/1048576, 0xe0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf8200000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xF8100000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16386
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "LEN", prod id 16386
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000246
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 481024 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1924092 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf8100000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0d400000 (pgoffset 54272)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0d3fffff: DRI memory manager (209412 kB)
(II) intel(0): 0x0d400000-0x0dffffff: exa offscreen (12288 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00b9efff: depth buffer (4096 kB) Y tiled
(II) intel(0): 0x00b9f000-0x00f9efff: back buffer (4096 kB) X tiled
(II) intel(0): 0x00f9f000-0x0139efff: front buffer (4096 kB) X tiled
(II) intel(0): 0x0139f000-0x0139ffff: overlay registers (4 kB)
(II) intel(0): 0x013a0000-0x013a9fff: HW cursors (40 kB)
(II) intel(0): 0x0d400000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0xe0f9f000, handle = 0xe0f9f000
(II) intel(0): [drm] mapped back buffer at 0xe0b9f000, handle = 0xe0b9f000
(II) intel(0): [drm] mapped depth buffer at 0xe079f000, handle = 0xe079f000
(II) intel(0): [drm] mapped classic textures at 0xee000000, handle = 0xee000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 245 x 184
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) Option "Emulate3Buttons" "true"
(II) TPPS/2 IBM TrackPoint: Forcing middle mouse button emulation on.
(**) Option "EmulateWheel" "true"
(**) Option "EmulateWheelButton" "2"
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device ThinkPad Extra Buttons
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device PnP Device (WACf008)
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(**) PnP Device (WACf008): always reports core events
(**) PnP Device (WACf008) device is /dev/tts/0
(**) PnP Device (WACf008) is in absolute mode
(**) PnP Device (WACf008): forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) /dev/tts/0: Tablet PC buttons are on
(**) Option "BaudRate" "9600"
(**) PnP Device (WACf008): serial speed 9600
(II) XINPUT: Adding extended input device "PnP Device (WACf008)" (type: Wacom Stylus)
(**) Option "Device" "/dev/tts/0"
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
usbDetect: can not ioctl version
Wacom ISDV4 control data (0) error in % query
(==) Wacom using pressure threshold of 15 for button 1
(==) Wacom General ISDV4 tablet speed=9600 (38400) maxX=24576 maxY=18432 maxZ=255 resX=2540 resY=2540 tilt=disabled
(==) Wacom device "PnP Device (WACf008)" top X=0 top Y=0 bottom X=24576 bottom Y=18432 resol X=2540 resol Y=2540
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"Last but not least, the output of lshal relevant to the wacom device, which seems to indicate that it knows something is there. there are no event devices associated like there are with kbd/mouse/etc.
udi = '/org/freedesktop/Hal/devices/pnp_WACf008'
info.linux.driver = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (WACf008)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_WACf008' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a' (string)
pnp.id = 'WACf008' (string)
pnp.serial.irq = 5 (0x5) (int)
pnp.serial.port = '0x200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_WACf008_serial_platform_0'
access_control.file = '/dev/tts/0' (string)
access_control.type = 'modem' (string)
info.callouts.add = {'hal-acl-tool --add-device', 'hal-setup-wacom', 'hal-setup-wacom'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'serial', 'access_control', 'input', 'input'} (string list)
info.category = 'serial' (string)
info.parent = '/org/freedesktop/Hal/devices/pnp_WACf008' (string)
info.product = 'PnP Device (WACf008)' (string)
info.subsystem = 'tty' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_WACf008_serial_platform_0' (string)
input.device = '/dev/tts/0' (string)
input.x11_driver = 'wacom' (string)
input.x11_options.ForceDevice = 'ISDV4' (string)
input.x11_options.Type = 'stylus' (string)
linux.device_file = '/dev/tts/0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'tty' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:0a/tty/ttyS0' (string)
serial.device = '/dev/tts/0' (string)
serial.originating_device = '/org/freedesktop/Hal/devices/pnp_WACf008' (string)
serial.port = 0 (0x0) (int)
serial.type = 'platform' (string)
wacom.types = {'eraser', 'touch', 'eraser', 'touch'} (string list)grateful for any suggestions anyone has beyond this point.
Offline
well, the answer is easy but I am annoyed to have wasted so much time figuring it out.
it is this: the linuxwacom-dev package seems to have installed hal-setup-wacom to /usr/libexec/, and as a result hal cannot find it.
just doing:
cp /usr/libexec/hal-setup-wacom /usr/lib/halgives me a working eraser (after restarting hal and then restarting X).
EDIT: also, if "xinput --list --short" does not list devices with the standard names stylus/eraser, then to get xsetwacom running properly put this in a script and run it from /etc/rc.local: (script stolen from another forum)
#! /bin/sh
for udi in `hal-find-by-property --key input.x11_driver --string wacom`
do
type=`hal-get-property --udi $udi --key input.x11_options.Type`
hal-set-property --udi $udi --key info.product --string $type
doneI tried to write this logic into the fdi policy, but somehow couldn't get it to work.
Last edited by tlawson (2009-04-30 20:08:35)
Offline
Works like a charm, thanks for investigating!
Offline