You are not logged in.

#1 2009-07-20 22:31:59

pdincubus
Member
From: England, UK
Registered: 2008-11-04
Posts: 20
Website

Arch x86_64, xen 3.4, and booting up the Xen0 kernel

Hi all,

i'm having a lot of problems setting Xen up. I've installed the Xen package from community and added a bunch of stuff to my menu.lst:

# (2) Arch Xen
title   Arch Linux (Xen)
root    (hd0,0)
kernel  /xen.gz dom0_mem=2097152
module  /vmlinuz-2.6.18.8-xen0 root=/dev/mapper/RootVG-OSRoot ro vga=792 console=tty0
module  /xen0.img

A few problems have occurred.

1. everything seems to start booting correctly until it tries to set up eth0, this fails.
my network card is:

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)

according to lspci

2. after this, i get no x session as it looks like as far as I can see the "nvidia" driver specified in my xorg.conf won't work as i'm guessing it's not setup for the xen kernel which i think is 2.6.18.8 judging by the menu.lst.

I've not managed to get past these two things yet, so any help would be appreciated. I think the nvidia problem is the biggy for me, as I've no idea what I need to do to make it work.

Any ideas anyone?

Thanks in advance! smile

[edit: if it helps, kernel.log reports i'm using this nvidia driver:

NVIDIA UNIX x86_64 Kernel Module  185.18.14

Last edited by pdincubus (2009-07-20 22:34:02)


Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz // 4GB RAM // GEForce 9800GT 512MB PCI-E // 2 x 250GB SATA in LVM2 setup // 1TB SATA Storage Drive // 1680x1050 LCD

Offline

#2 2009-07-21 16:40:24

pdincubus
Member
From: England, UK
Registered: 2008-11-04
Posts: 20
Website

Re: Arch x86_64, xen 3.4, and booting up the Xen0 kernel

i hate to bump things, but *bump*.

apologies, but i'm in a rut and still can't suss this out and need to get xen running pretty soon!

thanks in advance everyone! smile


Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz // 4GB RAM // GEForce 9800GT 512MB PCI-E // 2 x 250GB SATA in LVM2 setup // 1TB SATA Storage Drive // 1680x1050 LCD

Offline

#3 2009-07-23 21:05:39

pdincubus
Member
From: England, UK
Registered: 2008-11-04
Posts: 20
Website

Re: Arch x86_64, xen 3.4, and booting up the Xen0 kernel

*bump* anybody any ideas?


Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz // 4GB RAM // GEForce 9800GT 512MB PCI-E // 2 x 250GB SATA in LVM2 setup // 1TB SATA Storage Drive // 1680x1050 LCD

Offline

#4 2009-07-23 23:04:43

djszapi
Member
From: Cambridge, United Kingdom
Registered: 2009-06-14
Posts: 1,439
Website

Re: Arch x86_64, xen 3.4, and booting up the Xen0 kernel

Offline

#5 2009-07-24 17:15:03

pdincubus
Member
From: England, UK
Registered: 2008-11-04
Posts: 20
Website

Re: Arch x86_64, xen 3.4, and booting up the Xen0 kernel

yes, that's where i started. but i'm pretty sure it doesn't answer any of my questions. as mentioned above, i've got the kernel to start booting after the install of xen, i'm running into problems therein and do not know how to fix those, namely the xorg problem (which i think is to do with the nvidia card not having a module or something for the xen kernel (which is way older than the 2.6.30 the standard arch installs, it's something like 2.6.18), and the problem with that kernel not detecting my network card. i think if i can sort these two issues i'll be not far off sorting it.


Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz // 4GB RAM // GEForce 9800GT 512MB PCI-E // 2 x 250GB SATA in LVM2 setup // 1TB SATA Storage Drive // 1680x1050 LCD

Offline

#6 2009-07-27 08:49:37

pdincubus
Member
From: England, UK
Registered: 2008-11-04
Posts: 20
Website

Re: Arch x86_64, xen 3.4, and booting up the Xen0 kernel

*bump* again, anyone any ideas?


Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz // 4GB RAM // GEForce 9800GT 512MB PCI-E // 2 x 250GB SATA in LVM2 setup // 1TB SATA Storage Drive // 1680x1050 LCD

Offline

#7 2009-08-10 14:15:34

nicebloom
Member
From: Berlin
Registered: 2009-02-28
Posts: 38
Website

Re: Arch x86_64, xen 3.4, and booting up the Xen0 kernel

Hi there,

Have also Problems with XEN on this architecture (x86_64).:/
Have tried the community package which wasn't suitable in any way for my purpose.

Have now recompiled with AUR but there are still several issues.:lol:

Over all the XEND is not starting.
He crashes with the message that he is missing python libraries.
Until this I have figured out that "make tools" is failing right now.

Have tried different GCC and PYTHON versions but nothing seems to work.:(

Here you find the whole output of makepkg: http://pastebin.ca/1523921 cool

Regards,

nIcE

Last edited by nicebloom (2009-08-10 14:18:36)


...:::h4cK:y0uR:d4y:::...
cool

Offline

Board footer

Powered by FluxBB