You are not logged in.
Pages: 1
Topic closed
Hi,
I have my router set in mixed mode (N and G), and my EEE PC connects to it using G mode, but I would like it to connect in N mode. I know how to do it manually, but how to do it using network profiles?
Last edited by connexion2000 (2009-09-01 10:10:06)
Offline
Hello connexion2000!
What's the problem if you try to follow this wiki page?
http://wiki.archlinux.org/index.php/Network_Profiles
Offline
Post how you do it manually.
Offline
Offline
OK, problem seems solved. To manually use 802.11n use iwpriv (iwpriv ra0 WirelessMode=6).
So I used tweak in network profiles, adding this line:
PRE_UP="iwpriv ra0 WirelessMode=6"
and now I have 802.11n.
Offline
Does it work if you try it manually ?
If you read what the guy actually wrote, you wouldn't have asked this question.
Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy
Offline
I have just tried "iwpriv ra0 WirelessMode=6", but i get "Invalid command : WirelessMode=6"
Any idea what could be the problem?
Here is my iwpriv output:
# iwpriv
lo no private ioctls.
ra0 Available private ioctls :
set (8BE2) : set 1024 char & get 0
connStatus (0004) : set 0 & get 2047 char
driverVer (0005) : set 0 & get 2047 char
bainfo (0006) : set 0 & get 2047 char
descinfo (0007) : set 0 & get 2047 char
radio_off (000A) : set 0 & get 2047 char
radio_on (000B) : set 0 & get 2047 char
show (0014) : set 1024 char & get 2047 char
bbp (8BE3) : set 2047 char & get 2047 char
mac (8BE5) : set 1024 char & get 1024 char
e2p (8BE7) : set 1024 char & get 1024 char
stat (8BE9) : set 0 & get 2047 char
get_site_survey (8BED) : set 0 & get 1024 char
Last edited by Mr. X (2009-12-02 17:58:04)
Offline
Don't hijack the topic, open your own please.
Got Leenucks? :: Arch: Power in simplicity :: Get Counted! Registered Linux User #392717 :: Blog thingy
Offline
Pages: 1
Topic closed