You are not logged in.

#1 2009-09-30 02:43:13

Intrepid
Member
Registered: 2008-06-11
Posts: 254

cool and quiet module does not load: using an unlocked 4th core

I have an AMD Phenom II X3 720 Black Edition, with which I unlocked the fourth core.  Thus PROBABLY explains the reason why the powernow-k8 module does not recognize my hardware.  I have searched the forums and seen what people have done and it makes sense to me that this unbranding would cause the problem.  The error is as so:

FATAL: Error inserting powernow_k8 (/lib/modules/2.6.30-ARCH/kernel/arch/x86/kernel/cpu/cpufreq/powernow-k8.ko): No such device

Before responding with "go to such and such link in Arch forums," believe me, I have looked.  Unless someone has more insight on this problem than I do, I doubt that my situation is the same as most because of this unlocked fourth core (BIOS and gnome-device-manager label it as Phenom II X4 20 now big_smile).  Is there a way I can trick the system into thinking my hardware/processor is generic?  Thanks.

Last edited by Intrepid (2009-09-30 02:51:05)


Intrepid (adj.): Resolutely courageous; fearless.

Offline

#2 2009-09-30 11:42:50

Zariel
Member
Registered: 2008-10-07
Posts: 446

Re: cool and quiet module does not load: using an unlocked 4th core

Im in the same boat, though I dont care about cool n quiet. I dont get core temps from k10 temps tho.

Offline

#3 2009-09-30 21:08:23

R00KIE
Forum Fellow
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: cool and quiet module does not load: using an unlocked 4th core

Can you lock it again and try and see if it works?
Also you may want to see how that module detects the cpu and maybe try to make a special patch for that, may very well be just adding a line or something like that (I have no idea if it is or not, but some things can be that easy tongue ).


R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#4 2009-10-01 00:51:13

Intrepid
Member
Registered: 2008-06-11
Posts: 254

Re: cool and quiet module does not load: using an unlocked 4th core

It's good to hear others have some experience with this CPU.  I don't know if it's a problem or not; I hear that the new phenom ii's automatically shut down unused parts of the processor....  which is fine with me, but if it can make my CPU last longer, I WILL use cool-n-quiet big_smile.  I already hurt my luck by putting too much thermal paste, which I scraped OFF the mobo with an isopropyl alcohol cloth yikes... (surprised it didn't get into the pin contacts).

@R00KIE: Where can I find the source code for the module?


Intrepid (adj.): Resolutely courageous; fearless.

Offline

#5 2009-10-01 10:59:40

R00KIE
Forum Fellow
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: cool and quiet module does not load: using an unlocked 4th core

You can find the source code in the the kernel source code tree I believe.


R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

Board footer

Powered by FluxBB