You are not logged in.

#1 2009-11-26 22:05:11

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Wine Crashes Xorg

This issue started up a few days ago (I updated xorg and intel drivers that day) but essentially whenever I run anything wine related, my X server resets and brings me back to my gdm login screen. Here are the versions of my relevant programs and drivers:

X.Org X Server 1.7.1.902 (1.7.2 RC 2)
wine-1.1.33
xf86-input-evdev 2.3.1-1

Here's my xorg crash log:

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.1.901 (1.7.2 RC 1)
Release Date: 2009-11-6
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH i686 
Current Operating System: Linux brian-laptop 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/a844ada2-57a1-4e0b-bb97-361cb2a627e6 ro 5
Build Date: 06 November 2009  09:14:54PM
 
Current version of pixman: 0.16.2
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 26 14:14:49 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "SynapticsTouchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e5d40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:27a2:17aa:2083 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd8100000/524288, 0xc0000000/268435456, 0xd8200000/262144, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:27a6:17aa:2083 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd8180000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.0.901, module version = 1.2.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.7.1, module version = 2.9.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD8100000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Output TV has no monitor section
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "640x400"x0.0   25.18  640 656 752 800  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1152x864
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (340, 270) mm
(**) intel(0): DPI set to (95, 81)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.1.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000b00 to 0x00000f00
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 363776 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1455100 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000005f800000 physical
)
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000005fe00000 physical
)
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000005fe01000 physical
)
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000005fe0b000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000:            start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0f9f4000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane B is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane A is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 228
(II) Synaptics touchpad driver version 1.2.0
(--) SynapticsTouchpad auto-dev sets device to /dev/input/event7
(**) Option "Device" "/dev/input/event7"
(II) SynapticsTouchpad: x-axis range 1472 - 5472
(II) SynapticsTouchpad: y-axis range 1408 - 4448
(II) SynapticsTouchpad: pressure range 0 - 255
(II) SynapticsTouchpad: finger width range 0 - 0
(II) SynapticsTouchpad: buttons: left right middle double triple
(**) Option "SHMConfig" "false"
(**) Option "MaxTapTime" "180"
(**) Option "EmulateTwoFingerMinZ" "120"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "CircularScrolling" "on"
(**) Option "CircScrollTrigger" "0"
(--) SynapticsTouchpad: touchpad found
(**) Option "AlwaysCore" "true"
(**) Option "SendCoreEvents"
(**) SynapticsTouchpad: always reports core events
(II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
(**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
(**) SynapticsTouchpad: (accel) acceleration profile 0
(--) SynapticsTouchpad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.1.902, module version = 2.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.2.0
(**) Option "Device" "/dev/input/event7"
(**) Option "SHMConfig" "on"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "CircularScrolling" "true"
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event10"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for absolute axes.
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event9"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
(II) intel(0): New front buffer at 0x1800000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Allocate new frame buffer 1280x1024 stride 2048
(II) intel(0): New front buffer at 0x800000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "LKM", prod id 5889
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4624
(II) intel(0): Allocate new frame buffer 1280x800 stride 2048
(II) intel(0): New front buffer at 0xb000000
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.

Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x3b) [0x809cbcb]
1: /usr/bin/Xorg (0x8048000+0x52f15) [0x809af15]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb77e240c]
3: /usr/bin/Xorg (VidModeGetGammaRampSize+0x40) [0x8160fb0]
4: /usr/lib/xorg/modules/extensions/libextmod.so (0xb731c000+0x61e6) [0xb73221e6]
5: /usr/bin/Xorg (0x8048000+0x27a27) [0x806fa27]
6: /usr/bin/Xorg (0x8048000+0x1ab45) [0x8062b45]
7: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7406b86]
8: /usr/bin/Xorg (0x8048000+0x1a731) [0x8062731]
Segmentation fault at address 0x16c

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) UnloadModule: "synaptics"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Receiver: Close
(II) UnloadModule: "evdev"
(II) Logitech USB Receiver: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch

Offline

#2 2009-11-27 02:08:40

dneif
Member
From: Taiwan
Registered: 2008-09-10
Posts: 2

Re: Wine Crashes Xorg

I also encountered similar problem.
But I use lxde, and all my packages are up to date.
I didn't install an login manager, so run wine just bring me back to terminal.
My video card is an Ati HD3850...I just wondering if it's the problem.

Offline

#3 2009-11-27 18:12:08

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Re: Wine Crashes Xorg

Any ideas anyone?

Offline

#4 2009-11-27 18:38:51

JuseBox
Member
Registered: 2009-11-27
Posts: 260

Re: Wine Crashes Xorg

Are you running 32bit or 64bit Arch?


Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD

Offline

#5 2009-11-27 19:16:58

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Re: Wine Crashes Xorg

32 bit

Offline

#6 2009-11-27 19:20:50

JuseBox
Member
Registered: 2009-11-27
Posts: 260

Re: Wine Crashes Xorg

Have you tried to:

pacman -R wine

then:

pacman -Sy wine

Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD

Offline

#7 2009-11-27 19:53:34

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Re: Wine Crashes Xorg

JuseBox wrote:

Have you tried to:

pacman -R wine

then:

pacman -Sy wine

Just tried it and it didn't work, as I suspected it's not a wine issue.

Last edited by iamsmrt (2009-11-27 19:58:14)

Offline

#8 2009-11-27 19:54:56

JuseBox
Member
Registered: 2009-11-27
Posts: 260

Re: Wine Crashes Xorg

How about re-configuring your xorg.conf


Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD

Offline

#9 2009-11-27 19:58:56

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Re: Wine Crashes Xorg

JuseBox wrote:

How about re-configuring your xorg.conf

Is there anything in particular I should look to reconfigure?

Offline

#10 2009-11-27 20:02:24

JuseBox
Member
Registered: 2009-11-27
Posts: 260

Re: Wine Crashes Xorg

you can try:

X -configure ./xorg.conf.new

then just copy and paste the config into the xorg.conf after checking for changes and what not.
or if you using nvidia drivers:

nvidia-xconfig

see how that works of course i don't know your video drivers to reconfig

Last edited by JuseBox (2009-11-27 20:03:57)


Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD

Offline

#11 2009-11-27 20:29:14

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Re: Wine Crashes Xorg

I did the "X -configure" but then I tried to "X -config *new config file*" and my X server didn't seem to start as normal, all I got was a blank screen, so I decided to not write over my old config file for now.

Old config file:

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "SynapticsTouchpad" "SendCoreEvents"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "record"
    Load  "dri"
    Load  "glx"
    Load  "dbe"
    Load  "dri2"
    Load  "extmod"
    Load  "synaptics"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "us"
    Option  "XkbOptions" "terminate:ctrl_alt_bksp" 

EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
EndSection

Section "InputDevice"
   Identifier  "SynapticsTouchpad"
   Driver      "synaptics"
   Option      "AlwaysCore"        "true"  # send events to CorePointer
   Option      "Device"            "/dev/psaux"
   Option      "Protocol"          "auto-dev"
   Option      "SHMConfig"         "false" # configurable at runtime? security risk
   Option      "MaxTapTime"        "180"   # max time in ms for detecting tap
   Option      "VertTwoFingerScroll"   "true"  # vertical scroll anywhere with two fingers
   Option      "HorizTwoFingerScroll"  "true"  # horizontal scroll anywhere with two fingers
   Option      "EmulateTwoFingerMinZ"  "120"
   Option      "CircularScrolling"          "on"
   Option      "CircScrollTrigger"          "0"
   Option      "TapButton1"            "1"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
    HorizSync    30.0 - 130.0     # Safe for LCD's
    VertRefresh  50.0 - 100.0    # Safe for LCD's and most CRT's
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    DefaultDepth 24
    SubSection "Display"
        Viewport   0 0
        Depth     1
        Modes "1280x800"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
        Modes "1280x800"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
        Modes "1280x800"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
        Modes "1280x800"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
        Modes "1280x800"
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes "1280x800"
    EndSubSection
EndSection

Section "ServerFlags"
    Option "DontZap"  "false"
EndSection

New xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/misc"
    FontPath     "/usr/share/fonts/100dpi:unscaled"
    FontPath     "/usr/share/fonts/75dpi:unscaled"
    FontPath     "/usr/share/fonts/TTF"
    FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load  "record"
    Load  "dri"
    Load  "glx"
    Load  "dbe"
    Load  "dri2"
    Load  "extmod"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Last edited by iamsmrt (2009-11-27 20:34:56)

Offline

#12 2009-11-27 20:41:01

JuseBox
Member
Registered: 2009-11-27
Posts: 260

Re: Wine Crashes Xorg

Try this out and see what we can get from it:

[command] | tee [filename]

This will save the output of the command to a text file.  So when it kicks you off maybe we can see what is causing it.

or;

[command] >> [text_file.txt]

Last edited by JuseBox (2009-11-27 20:44:13)


Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD

Offline

#13 2009-11-27 20:58:22

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Re: Wine Crashes Xorg

That created an empty text file.

EDIT: I actually tested it out and overwrote my old xorg.conf with my new xorg.conf and it started up things nicely. However, wine still broke it, returning my session to the gdm login screen. Replaced everything again with my old xorg.conf.

EDIT #2: I've tried downgrading my xorg-server package (oldest version I have on my computer is 1.6.3.901-1) but that didn't fix the problem, so I don't really know what to do sad.

Last edited by iamsmrt (2009-11-27 21:13:56)

Offline

#14 2009-12-01 21:34:40

JSHN
Member
From: Sweden, Trollhättan
Registered: 2009-10-05
Posts: 12

Re: Wine Crashes Xorg

Hi,

I've got the same problem at work, and for me the problem was that I used xrandr to set some settings when the xserver starts.
I've had problems before with dual monitors and resolutions when xserver does not recognize the settings correctly,
resulting in windows not having the correct sizes a.s.o.

But how I get around this in both cases is that I run: "xrandr -q" after the xserver is started but before my WM (icewm) starts.
Maybe you can just run: "xrandr -q" after you have logged on if you are not using .xinitrc to load your WM.
"xrandr -q" some how makes the xserver recognize the resolution and settings om my monitors and everthing is fine again.

I hope it works for you too.

Take care.

Offline

#15 2009-12-02 14:49:20

Runiq
Member
From: Germany
Registered: 2008-10-29
Posts: 1,053

Re: Wine Crashes Xorg

Do you, by any chance, happen to run musca as a WM?

Offline

#16 2009-12-03 01:05:58

iamsmrt
Member
Registered: 2009-08-12
Posts: 138

Re: Wine Crashes Xorg

JSHN wrote:

Hi,

I've got the same problem at work, and for me the problem was that I used xrandr to set some settings when the xserver starts.
I've had problems before with dual monitors and resolutions when xserver does not recognize the settings correctly,
resulting in windows not having the correct sizes a.s.o.

But how I get around this in both cases is that I run: "xrandr -q" after the xserver is started but before my WM (icewm) starts.
Maybe you can just run: "xrandr -q" after you have logged on if you are not using .xinitrc to load your WM.
"xrandr -q" some how makes the xserver recognize the resolution and settings om my monitors and everthing is fine again.

I hope it works for you too.

Take care.

Yea, I do have xrandr setting output in the beginning. I'll give it a look, thanks.

Runiq wrote:

Do you, by any chance, happen to run musca as a WM?

Nope.

I temporarily fixed the problem by downgrading to an even earlier version of xorg-server, I'll play with the xrandr stuff and report back when I have more time.

Last edited by iamsmrt (2009-12-03 01:09:38)

Offline

#17 2010-02-22 19:34:20

X-dark
Member
From: France
Registered: 2009-10-25
Posts: 136
Website

Re: Wine Crashes Xorg

Hi there,

I have the exact same problem.

Backtrace:
0: /usr/bin/Xorg (xorg_backtrace+0x3b) [0x809d9db]
1: /usr/bin/Xorg (0x8048000+0x5ccf5) [0x80a4cf5]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb7fae40c]
3: /usr/bin/Xorg (VidModeGetGammaRampSize+0x40) [0x8181f30]
4: /usr/lib/xorg/modules/extensions/libextmod.so (0xb7f91000+0x61e6) [0xb7f971e6]
5: /usr/bin/Xorg (0x8048000+0x40317) [0x8088317]
6: /usr/bin/Xorg (0x8048000+0x1a685) [0x8062685]
7: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7bd4b86]
8: /usr/bin/Xorg (0x8048000+0x1a271) [0x8062271]
Segmentation fault at address 0x16c
 
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting

I can confirm that doing "xrandr -q" is a working workaround. So maybe it is related to xrandr.

Here is my xorg.conf :

Section "Module"
    Load        "dbe"   # Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "freetype"
    Load       "glx"
        Load       "dri"
        Load    "drm"
    EndSection
    Section "Files"
        FontPath   "/usr/share/fonts/misc"
        FontPath   "/usr/share/fonts/100dpi:unscaled"
        FontPath   "/usr/share/fonts/75dpi:unscaled"
    EndSection
    Section "ServerFlags"
        Option "DontZap" "false"
    EndSection
    Section "Monitor"
        Identifier  "My Monitor"
    EndSection
    Section "Device"
        Identifier  "** ATI (radhd)                      [ati]"
        Driver      "radeon"
        Option  "XAANoOffscreenPixmaps" "true"
EndSection

Cedric Girard

Offline

#18 2010-02-24 13:31:54

huangshu
Member
Registered: 2009-05-07
Posts: 2

Re: Wine Crashes Xorg

I had the same situation for picasa these days and "xrandr -q" solved (by-passed) the problem. Thanks for the work around.

Offline

Board footer

Powered by FluxBB