Arch Linux

pfrancois

Member

From: paris, france

Registered: 2005-01-15

Posts: 7

wireless with toshiba tecra 8200

i try to use wifi with this laptop.
so i install pcmcia-util. after that lshwd output:

lshwd
00:00.0 Host bridge: Intel Corp.|82815 815 Chipset Host Bridge and Memory Controller Hub (intel-agp)
00:01.0 PCI bridge: Intel Corp.|82815/82815EM/EP AGP Bridge (unknown)
00:1e.0 PCI bridge: Intel Corp.|82801 Hub Interface to PCI Bridge (hw_random)
00:1f.0 ISA bridge: Intel Corp.|82801BAM LPC Interface Bridge (sonypi)
00:1f.1 IDE interface: Intel Corp.|82820 820 (Camino 2) Chipset IDE U100 (-M) (piix)
00:1f.2 USB Controller: Intel Corp.|82820 815e (Camino 2) Chipset USB (Hub A) (uhci_hcd)
00:1f.4 USB Controller: Intel Corp.|82820 815e (Camino 2) Chipset USB (Hub B) (uhci_hcd)
00:1f.6 Modem: Intel Corp.|82820 820 (Camino 2) Chipset AC'97 Modem Controller (snd-intel8x0m)
01:00.0 VGA compatible controller: Trident Microsystems|Cyber/BladeXP (trident)
02:07.0 Multimedia audio controller: Yamaha Corp|YMF-754 [DS-1E Audio Controller] (snd-ymfpci)
02:08.0 Ethernet controller: Intel Corp.|EtherExpress PRO/100 (eepro100)
02:0c.0 CardBus bridge: Texas Instruments|PCI1410 PC card Cardbus Controller (yenta_socket)
02:0d.0 CardBus bridge: Toshiba|ToPIC95 PCI to Cardbus Bridge with ZV Support (yenta_socket)
02:0d.1 CardBus bridge: Toshiba|ToPIC95 PCI to Cardbus Bridge with ZV Support (yenta_socket)
002:001 USB Hub: Virtual|Hub (hub)
001:001 USB Hub: Virtual|Hub (hub)
--:00.6 PCMCIA Network card: TOSHIBA|Wireless LAN Card (unknown)
---:--- Mouse: Generic PS/2 Wheel Mouse [/dev/psaux] (msintellips/2)

but it didn"t yet work.
so install wlang. but it dont work.
when the wlan daemon start, it show this

:: Starting WLAN Devices                                                                                              [BUSY] FATAL: Module wlan0 not found.
FATAL: Module wlan0 not found.
message=lnxreq_ifstate
  ifstate=fwload
  resultcode=success
load_cardpda failed, exiting.
Unknown prism2 hardware type  (), assuming SSF
Processing PDR file: /tmp/prism2_ssf.pda
Warning: RAM load only, PDA changes will NOT be written to flash.
Reading S-record file /etc/wlan//prism2_pm.hex...
NIC ID: 0 v0.0.0
MFI ID: 0 v0 0->0
CFI ID: 0 v0 0->0
PRI ID: 0x3 v2 1->1
Version:  ID 0x15 1.1.2
Compat: Role 0 Id 0x3 v2 4->4
Compat: Role 0x1 Id 0x2 v2 1->1
Seq: 0
Platform:  ID 0x800e 1.0.0
Platform:  ID 0x8015 1.0.0
Platform:  ID 0x8019 1.0.0
Platform:  ID 0x801d 1.0.0
Platform:  ID 0x8024 1.0.0
prism2dl: warning: Failed to find PDR for plugrec 0x0003.
prism2dl: warning: Failed to find PDR for plugrec 0x0005.
prism2dl: warning: Failed to find PDR for plugrec 0x0006.
prism2dl: warning: Failed to find PDR for plugrec 0x0007.
prism2dl: warning: Failed to find PDR for plugrec 0x0008.
prism2dl: warning: Failed to find PDR for plugrec 0x0402.
prism2dl: warning: Failed to find PDR for plugrec 0x0403.
prism2dl: warning: Failed to find PDR for plugrec 0x0404.
prism2dl: warning: Failed to find PDR for plugrec 0x0408.
prism2dl: warning: Failed to find PDR for plugrec 0x0001.
prism2dl: writeimage()->xxxdl_state msg indicates failure, w/ resultcode=11, aborting download.
prism2dl: Failed to ramwrite image data for /etc/wlan//prism2_pm.hex, exiting.
Reading S-record file /etc/wlan//prism2_pm.hex...
NIC ID: 0x5 v1.2.2
MFI ID: 0x1 v2 4->4
CFI ID: 0x2 v1 6->6
PRI ID: 0x3 v2 1->1
Version:  ID 0x15 1.1.2
Compat: Role 0 Id 0x3 v2 4->4
Compat: Role 0x1 Id 0x2 v2 1->1
Seq: 0
Platform:  ID 0x800e 1.0.0
Platform:  ID 0x8015 1.0.0
Platform:  ID 0x8019 1.0.0
Platform:  ID 0x801d 1.0.0
Platform:  ID 0x8024 1.0.0
prism2dl: Incompatible firmware image.                                                      
Firmware failed to load for device wlan0

someone has an idea ?
help

for anyone that say it dont work. see this link, with gentoo it work. http://solocopier.com/Gentoo_Toshiba/#%20%20%20%20wifi :?

tomk

Forum Fellow

From: Ireland

Registered: 2004-07-21

Posts: 9,839

Re: wireless with toshiba tecra 8200

Well, that Gentoo howto says you need the orinoco_cs module. Is cardmgr loading it for you?