Arch Linux

laleshii

Member

Registered: 2008-03-22

Posts: 7

OpenVPN bridge. Can't access other machines on the local network

Hello,

Followed this guide: https://wiki.archlinux.org/index.php/OpenVPN_Bridge
This is my setup: I have a wireless router(192.168.2.1) which connects to the Internet through a PPPoE connection and acts as a gateway and DHCP server for the local network. I'm trying to make a VPN on a machine(192.168.2.201). I bridged the VPN tap0 with eth0 through br0 like in the guide. Connecting works ok and the client receives the proper IP but I cannot access other machines on the local network (ping works only server and client).

This is my server.conf:

port 1194
proto tcp
dev tap0
ca ca.crt
cert server.crt
key server.key  # This file should be kept secret
dh dh1024.pem
ifconfig-pool-persist ipp.txt
server-bridge 192.168.2.1 255.255.255.0 192.168.2.202 192.168.2.210
push "route 192.168.2.0 255.255.255.0"
keepalive 10 120
comp-lzo
persist-key
persist-tun
status openvpn-status.log
verb 6

This is my client.conf:

client
dev tap
proto tcp
remote hostname.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca ca.crt
cert client.crt
key client.key
ns-cert-type server
comp-lzo
verb 6

If you need any more info just reply.

Thank you.

Rares

Last edited by laleshii (2011-10-20 14:21:37)