You are not logged in.
- Topics: Active | Unanswered
#1 2011-11-06 14:57:08
- rtoijala
- Member
- Registered: 2011-09-11
- Posts: 36
Realtek ethernet initialization slow [SOLVED]
Hello!
I am having problems with my ethernet controller (Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller) taking 40-60 seconds to get a network connection.
I am using netcfg 2.6.8-1 and have enabled net-auto-wired in my DAEMONS array:
DAEMONS=(syslog-ng crond dbus net-auto-wired net-auto-wireless !ntpd cupsd netfs mpd)Here is my netcfg profile:
CONNECTION='ethernet'
DESCRIPTION='Ethernet connection at home'
INTERFACE='eth0'
IP='dhcp'
## for DHCPv6
#IP6='dhcp'
## for IPv6 autoconfiguration
#IP6='statelessThis is the output from lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)This is the output from dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
[ 0.000000] Command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9700 Notebook PC /30CB, BIOS F.59 11/25/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f8520] f8520
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ bfecb000-bfed0000
[ 0.000000] RAMDISK: 37dca000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bfed5bdd 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
[ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed61e5 0025F (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed613f 000A6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed5c59 004E6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bfed0000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bfed0000
[ 0.000000] NODE_DATA [00000000bfec6000 - 00000000bfecafff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] On node 0 totalpages: 786015
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10692 pages used for memmap
[ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78464 r8192 d23936 u1048576
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775262
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3088932k/3144512k available (4066k kernel code, 452k absent, 55128k reserved, 3302k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.793 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.98 BogoMIPS (lpj=6095976)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003483] Security Framework initialized
[ 0.003491] AppArmor: AppArmor disabled by boot time parameter
[ 0.006723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009911] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011485] Mount-cache hash table entries: 256
[ 0.012020] Initializing cgroup subsys cpuacct
[ 0.012063] Initializing cgroup subsys memory
[ 0.012087] Initializing cgroup subsys devices
[ 0.012090] Initializing cgroup subsys freezer
[ 0.012092] Initializing cgroup subsys net_cls
[ 0.012095] Initializing cgroup subsys blkio
[ 0.012163] CPU: Physical Processor ID: 0
[ 0.012165] CPU: Processor Core ID: 0
[ 0.012168] mce: CPU supports 6 MCE banks
[ 0.012178] CPU0: Thermal monitoring enabled (TM2)
[ 0.012185] using mwait in idle threads.
[ 0.013589] ACPI: Core revision 20110413
[ 0.020015] ftrace: allocating 16144 entries in 64 pages
[ 0.023754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059353] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.059996] PEBS disabled due to CPU errata.
[ 0.059996] ... version: 2
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.076788] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.103342] Booting Node 0, Processors #1 Ok.
[ 0.103346] smpboot cpu 1: start_ip = 9a000
[ 0.200020] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206659] Brought up 2 CPUs
[ 0.206662] Total of 2 processors activated (7318.31 BogoMIPS).
[ 0.207867] devtmpfs: initialized
[ 0.208097] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
[ 0.210342] print_constraints: dummy:
[ 0.210439] NET: Registered protocol family 16
[ 0.210574] ACPI: bus type pci registered
[ 0.210759] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.210763] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.251674] PCI: Using configuration type 1 for base access
[ 0.252194] bio: create slab <bio-0> at 0
[ 0.254077] ACPI: EC: Look up EC in DSDT
[ 0.254256] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
[ 0.254264] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8800bae32a78), AE_NOT_FOUND (20110413/psparse-536)
[ 0.256623] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.257710] ACPI: SSDT 00000000bfed6aa1 001F6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.258077] ACPI: Dynamic OEM Table Load:
[ 0.258081] ACPI: SSDT (null) 001F6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.258208] ACPI: SSDT 00000000bfed6444 005D8 (v01 HP 30CB 00003001 INTL 20061109)
[ 0.258557] ACPI: Dynamic OEM Table Load:
[ 0.258561] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109)
[ 0.258784] ACPI: SSDT 00000000bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259142] ACPI: Dynamic OEM Table Load:
[ 0.259146] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259233] ACPI: SSDT 00000000bfed6a1c 00085 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259584] ACPI: Dynamic OEM Table Load:
[ 0.259587] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259886] ACPI: Interpreter enabled
[ 0.259890] ACPI: (supports S0 S3 S4 S5)
[ 0.259911] ACPI: Using IOAPIC for interrupt routing
[ 0.267408] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.267597] ACPI: No dock devices found.
[ 0.267599] HEST: Table not found.
[ 0.267603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.267938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.268586] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.268590] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.268593] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.268597] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.268600] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.268603] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.268606] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.268609] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.268629] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.268683] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[ 0.268726] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.268730] pci 0000:00:01.0: PME# disabled
[ 0.268789] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.268853] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.268899] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.268964] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.269028] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.269055] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
[ 0.269154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.269161] pci 0000:00:1a.7: PME# disabled
[ 0.269192] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.269218] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
[ 0.269311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.269317] pci 0000:00:1b.0: PME# disabled
[ 0.269348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.269445] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.269450] pci 0000:00:1c.0: PME# disabled
[ 0.269484] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.269580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.269585] pci 0000:00:1c.1: PME# disabled
[ 0.269624] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.269720] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.269726] pci 0000:00:1c.5: PME# disabled
[ 0.269759] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.269822] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.269867] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.269931] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.270004] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.270068] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.270130] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.270157] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
[ 0.270257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.270263] pci 0000:00:1d.7: PME# disabled
[ 0.270290] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.270386] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.270498] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.270505] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.270514] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.270559] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.270578] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.270591] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.270605] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.270618] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.270632] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.270689] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.270719] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.270732] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.270746] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.270760] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.270773] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.270787] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
[ 0.270841] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.270847] pci 0000:00:1f.2: PME# disabled
[ 0.270870] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.270889] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.270936] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.271034] pci 0000:01:00.0: [10de:0425] type 0 class 0x000300
[ 0.271055] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[ 0.271078] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271102] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.271118] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.271134] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.271221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.271225] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.271229] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.271234] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271401] pci 0000:02:00.0: [8086:4222] type 0 class 0x000280
[ 0.271458] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff]
[ 0.271795] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.271808] pci 0000:02:00.0: PME# disabled
[ 0.271878] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.271917] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.271922] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
[ 0.271928] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.271938] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.272006] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
[ 0.272012] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
[ 0.272018] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.272027] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.272128] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
[ 0.272154] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.272198] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit]
[ 0.272250] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.272315] pci 0000:08:00.0: supports D1 D2
[ 0.272318] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.272325] pci 0000:08:00.0: PME# disabled
[ 0.272354] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.272367] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[ 0.272373] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.272379] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.272388] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272454] pci 0000:09:09.0: [1180:0832] type 0 class 0x000c00
[ 0.272472] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.272474] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
[ 0.272492] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff]
[ 0.272587] pci 0000:09:09.0: supports D1 D2
[ 0.272589] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272595] pci 0000:09:09.0: PME# disabled
[ 0.272619] pci 0000:09:09.1: [1180:0822] type 0 class 0x000805
[ 0.272642] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff]
[ 0.272735] pci 0000:09:09.1: supports D1 D2
[ 0.272737] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272744] pci 0000:09:09.1: PME# disabled
[ 0.272767] pci 0000:09:09.2: [1180:0592] type 0 class 0x000880
[ 0.272791] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff]
[ 0.272884] pci 0000:09:09.2: supports D1 D2
[ 0.272886] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272892] pci 0000:09:09.2: PME# disabled
[ 0.272915] pci 0000:09:09.3: [1180:0852] type 0 class 0x000880
[ 0.272938] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff]
[ 0.273031] pci 0000:09:09.3: supports D1 D2
[ 0.273033] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.273039] pci 0000:09:09.3: PME# disabled
[ 0.273095] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
[ 0.273101] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.273107] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.273116] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.273120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.273123] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.273126] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.273129] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.273132] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.273135] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.273139] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.273142] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.273177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.273305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.273370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.273416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.273457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.273521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.273569] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.273573] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.273575] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.278401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.278457] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.278510] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.278561] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.278613] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.278665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.278715] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.278767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.278887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.278894] vgaarb: loaded
[ 0.278896] vgaarb: bridge control possible 0000:01:00.0
[ 0.279005] PCI: Using ACPI for IRQ routing
[ 0.291398] PCI: pci_cache_line_size set to 64 bytes
[ 0.291537] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.291540] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.291700] NetLabel: Initializing
[ 0.291703] NetLabel: domain hash size = 128
[ 0.291705] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.291722] NetLabel: unlabeled traffic allowed by default
[ 0.291738] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.291744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.291750] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.303337] Switching to clocksource hpet
[ 0.306534] Switched to NOHz mode on CPU #0
[ 0.306616] Switched to NOHz mode on CPU #1
[ 0.311449] pnp: PnP ACPI init
[ 0.311470] ACPI: bus type pnp registered
[ 0.312253] pnp 00:00: [bus 00-ff]
[ 0.312257] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.312259] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.312262] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.312265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.312267] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.312270] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.312272] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.312275] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.312277] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.312280] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.312282] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.312285] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.312287] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.312290] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.312292] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.312295] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.312298] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.312300] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.312303] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.312306] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.312393] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.312475] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.312478] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.312481] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.312483] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.312485] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.312492] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.312494] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.312497] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.312583] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.312587] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.312590] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.312594] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.312597] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.312600] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.312603] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.312607] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.312611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312836] pnp 00:02: [io 0x0000-0x001f]
[ 0.312838] pnp 00:02: [io 0x0081-0x0091]
[ 0.312841] pnp 00:02: [io 0x0093-0x009f]
[ 0.312843] pnp 00:02: [io 0x00c0-0x00df]
[ 0.312845] pnp 00:02: [dma 4]
[ 0.312895] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.312909] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.312961] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.313035] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.313108] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.313112] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.313126] pnp 00:05: [io 0x00f0]
[ 0.313138] pnp 00:05: [irq 13]
[ 0.313188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.313201] pnp 00:06: [io 0x002e-0x002f]
[ 0.313203] pnp 00:06: [io 0x004e-0x004f]
[ 0.313205] pnp 00:06: [io 0x0061]
[ 0.313208] pnp 00:06: [io 0x0063]
[ 0.313210] pnp 00:06: [io 0x0065]
[ 0.313212] pnp 00:06: [io 0x0067]
[ 0.313214] pnp 00:06: [io 0x0080]
[ 0.313216] pnp 00:06: [io 0x0092]
[ 0.313218] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.313220] pnp 00:06: [io 0x0380-0x0383]
[ 0.313222] pnp 00:06: [io 0x0680-0x069f]
[ 0.313224] pnp 00:06: [io 0x0800-0x080f]
[ 0.313226] pnp 00:06: [io 0x1000-0x107f]
[ 0.313229] pnp 00:06: [io 0x1180-0x11bf]
[ 0.313231] pnp 00:06: [io 0x1640-0x164f]
[ 0.313233] pnp 00:06: [io 0xfe00]
[ 0.313323] system 00:06: [io 0x0380-0x0383] has been reserved
[ 0.313327] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.313330] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.313348] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.313351] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.313354] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.313357] system 00:06: [io 0xfe00] has been reserved
[ 0.313361] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313386] pnp 00:07: [io 0x06a0-0x06af]
[ 0.313389] pnp 00:07: [io 0x06b0-0x06ff]
[ 0.313460] system 00:07: [io 0x06a0-0x06af] has been reserved
[ 0.313464] system 00:07: [io 0x06b0-0x06ff] has been reserved
[ 0.313467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313478] pnp 00:08: [io 0x0070-0x0077]
[ 0.313485] pnp 00:08: [irq 8]
[ 0.313539] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.313607] pnp 00:09: [io 0x0060]
[ 0.313609] pnp 00:09: [io 0x0064]
[ 0.313615] pnp 00:09: [irq 1]
[ 0.313673] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.313688] pnp 00:0a: [irq 12]
[ 0.313750] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
[ 0.313774] pnp: PnP ACPI: found 11 devices
[ 0.313776] ACPI: ACPI bus type pnp unregistered
[ 0.320373] PCI: max bus depth: 1 pci_try_num: 2
[ 0.320432] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[ 0.320436] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0100000-0xc01000ff]
[ 0.320444] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0100000-0xc01000ff] (PCI address [0xc0100000-0xc01000ff])
[ 0.320450] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.320453] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.320456] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.320461] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.320466] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.320472] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.320476] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
[ 0.320483] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.320489] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.320498] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
[ 0.320502] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
[ 0.320510] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.320516] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.320526] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.320529] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[ 0.320533] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.320540] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.320546] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc00fffff pref]
[ 0.320556] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[ 0.320558] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.320565] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.320571] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.320591] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320596] pci 0000:00:01.0: setting latency timer to 64
[ 0.320607] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.320613] pci 0000:00:1c.0: setting latency timer to 64
[ 0.320621] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.320627] pci 0000:00:1c.1: setting latency timer to 64
[ 0.320635] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.320641] pci 0000:00:1c.5: setting latency timer to 64
[ 0.320650] pci 0000:00:1e.0: setting latency timer to 64
[ 0.320655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.320658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.320660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.320663] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.320666] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.320669] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.320672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.320674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.320677] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.320680] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.320683] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.320686] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff]
[ 0.320689] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.320692] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.320695] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff]
[ 0.320697] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.320700] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.320704] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.320706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.320709] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc00fffff pref]
[ 0.320712] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
[ 0.320715] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.320718] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.320720] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.320723] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.320726] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.320728] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.320731] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.320734] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.320830] NET: Registered protocol family 2
[ 0.321074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.322679] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.328896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.329687] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.329690] TCP reno registered
[ 0.329704] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.329768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.330176] NET: Registered protocol family 1
[ 0.330392] pci 0000:01:00.0: Boot video device
[ 0.330419] PCI: CLS 64 bytes, default 64
[ 0.330488] Unpacking initramfs...
[ 0.369353] Freeing initrd memory: 2200k freed
[ 0.370476] Simple Boot Flag at 0x35 set to 0x1
[ 0.370972] audit: initializing netlink socket (disabled)
[ 0.370988] type=2000 audit(1320586961.369:1): initialized
[ 0.380802] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.401147] VFS: Disk quotas dquot_6.5.2
[ 0.401325] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.401521] msgmni has been set to 6037
[ 0.401788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.401833] io scheduler noop registered
[ 0.401836] io scheduler deadline registered
[ 0.401898] io scheduler cfq registered (default)
[ 0.402034] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.402072] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.402134] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.402193] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.402283] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.402342] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.402432] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.402491] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.402686] intel_idle: MWAIT substates: 0x22220
[ 0.402689] intel_idle: does not run on family 6 model 15
[ 0.402694] ERST: Table is not found!
[ 0.402765] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.603627] Linux agpgart interface v0.103
[ 0.603727] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.625005] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.625045] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.625141] mousedev: PS/2 mouse device common for all mice
[ 0.627290] rtc_cmos 00:08: RTC can wake from S4
[ 0.627416] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.627450] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.627461] cpuidle: using governor ladder
[ 0.627463] cpuidle: using governor menu
[ 0.627728] TCP cubic registered
[ 0.627731] NET: Registered protocol family 17
[ 0.627740] Registering the dns_resolver key type
[ 0.627861] PM: Hibernation image not present or could not be loaded.
[ 0.627867] registered taskstats version 1
[ 0.637491] rtc_cmos 00:08: setting system clock to 2011-11-06 13:42:42 UTC (1320586962)
[ 0.637554] Initializing network drop monitor service
[ 0.639163] Freeing unused kernel memory: 712k freed
[ 0.639370] Write protecting the kernel read-only data: 6144k
[ 0.639542] Freeing unused kernel memory: 12k freed
[ 0.642762] Freeing unused kernel memory: 776k freed
[ 0.652005] udevd[37]: starting version 174
[ 0.661005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.712421] usbcore: registered new interface driver usbfs
[ 0.712452] usbcore: registered new interface driver hub
[ 0.712861] usbcore: registered new device driver usb
[ 0.714129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.714176] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.714199] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.714204] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.714256] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.714293] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.721629] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.721658] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
[ 0.733414] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.733616] hub 1-0:1.0: USB hub found
[ 0.733621] hub 1-0:1.0: 4 ports detected
[ 0.733740] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.733767] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.733772] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.733928] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.733968] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.740812] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.740839] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
[ 0.756276] SCSI subsystem initialized
[ 0.763405] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.763606] hub 2-0:1.0: USB hub found
[ 0.763612] hub 2-0:1.0: 6 ports detected
[ 0.766819] libata version 3.00 loaded.
[ 0.768867] ahci 0000:00:1f.2: version 3.0
[ 0.768891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.768950] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.769022] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.769027] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.769033] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.769769] scsi0 : ahci
[ 0.770124] scsi1 : ahci
[ 0.770204] scsi2 : ahci
[ 0.770347] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
[ 0.770352] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
[ 0.770355] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
[ 0.780764] ata_piix 0000:00:1f.1: version 2.13
[ 0.780782] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.780828] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.781218] scsi3 : ata_piix
[ 0.781306] scsi4 : ata_piix
[ 0.781726] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.781729] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.857333] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.857390] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.857402] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.857407] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.857423] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.857475] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.857662] hub 3-0:1.0: USB hub found
[ 0.857667] hub 3-0:1.0: 2 ports detected
[ 0.857769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.857777] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.857781] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.857790] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.857833] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.857993] hub 4-0:1.0: USB hub found
[ 0.857998] hub 4-0:1.0: 2 ports detected
[ 0.858094] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.858102] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.858106] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.858116] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.858154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.858306] hub 5-0:1.0: USB hub found
[ 0.858311] hub 5-0:1.0: 2 ports detected
[ 0.858396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.858406] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.858411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.858429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.858475] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.858621] hub 6-0:1.0: USB hub found
[ 0.858625] hub 6-0:1.0: 2 ports detected
[ 0.858708] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.858715] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.858720] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.858728] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.858762] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.858914] hub 7-0:1.0: USB hub found
[ 0.858919] hub 7-0:1.0: 2 ports detected
[ 0.950398] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.86, max MWDMA2
[ 0.963614] ata4.00: configured for MWDMA2
[ 1.090033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.090057] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.090090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.090919] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.090924] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 1.090928] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.091030] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.091035] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 1.091038] ata3.00: 488397168 sectors, multi 16: LBA48
[ 1.091928] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.091933] ata1.00: configured for UDMA/100
[ 1.092038] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.092044] ata3.00: configured for UDMA/100
[ 1.092136] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.092469] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.093620] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.86 PQ: 0 ANSI: 5
[ 1.102218] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.102259] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.102284] sd 0:0:0:0: [sda] Write Protect is off
[ 1.102288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.102315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.102321] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.102325] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.102350] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.103373] usb 2-2: new high speed USB device number 2 using ehci_hcd
[ 1.104870] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.104875] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.105203] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.127901] sdb: sdb1
[ 1.128208] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.135068] sda: sda1 sda2 sda3
[ 1.135397] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.343378] usb 2-4: new high speed USB device number 3 using ehci_hcd
[ 1.373352] Refined TSC clocksource calibration: 1828.949 MHz.
[ 1.373358] Switching to clocksource tsc
[ 1.541611] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.586684] usb 4-2: new low speed USB device number 2 using uhci_hcd
[ 3.620978] udevd[241]: starting version 174
[ 3.860528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.860538] ACPI: Power Button [PWRB]
[ 3.860977] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.860983] ACPI: Sleep Button [SLPB]
[ 3.862532] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 3.863014] ACPI: Lid Switch [LID]
[ 3.864840] ACPI: AC Adapter [ACAD] (on-line)
[ 3.865293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.865301] ACPI: Power Button [PWRF]
[ 3.954841] ACPI: acpi_idle registered with cpuidle
[ 3.958941] Monitor-Mwait will be used to enter C-1 state
[ 3.959002] Monitor-Mwait will be used to enter C-2 state
[ 3.959024] [Firmware Bug]: Invalid critical threshold (0)
[ 3.959341] Monitor-Mwait will be used to enter C-3 state
[ 3.959379] Marking TSC unstable due to TSC halts in idle
[ 3.960679] Switching to clocksource hpet
[ 3.961405] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.961408] ACPI: Thermal Zone [THR1] (49 C)
[ 3.964908] acpi device:05: registered as cooling_device1
[ 3.965003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[ 3.965627] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.979488] r592 0000:09:09.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.979831] r592: driver successfully loaded
[ 4.034101] ACPI: Battery Slot [BAT0] (battery present)
[ 4.114730] iTCO_vendor_support: vendor-support=0
[ 4.188196] wmi: Mapper loaded
[ 4.223279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.223440] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 4.224124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.283008] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 4.327775] sdhci: Secure Digital Host Controller Interface driver
[ 4.327778] sdhci: Copyright(c) Pierre Ossman
[ 4.337983] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 4.338003] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.339134] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.339152] _regulator_get: 0000:09:09.1 supply vmmc not found, using dummy regulator
[ 4.340202] Registered led device: mmc0::
[ 4.341284] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
[ 4.341896] firewire_ohci 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.348208] [drm] Initialized drm 1.1.0 20060810
[ 4.374187] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6
[ 4.374312] generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1a.1-2/input0
[ 4.374333] usbcore: registered new interface driver usbhid
[ 4.374336] usbhid: USB HID core driver
[ 4.394502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.394529] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.394593] r8169 0000:08:00.0: setting latency timer to 64
[ 4.394688] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
[ 4.394951] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc900115c0000, 00:1e:68:22:0d:d6, XID 18000000 IRQ 45
[ 4.400195] firewire_ohci: Added fw-ohci device 0000:09:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 4.420843] Initializing USB Mass Storage driver...
[ 4.420973] scsi5 : usb-storage 2-2:1.0
[ 4.421105] usbcore: registered new interface driver usb-storage
[ 4.421107] USB Mass Storage support registered.
[ 4.429004] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 4.438830] Linux media interface: v0.10
[ 4.439547] usbcore: registered new interface driver uas
[ 4.441419] cfg80211: Calling CRDA to update world regulatory domain
[ 4.472037] Linux video capture interface: v2.00
[ 4.486614] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
[ 4.492079] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
[ 4.492141] usbcore: registered new interface driver uvcvideo
[ 4.492144] USB Video Class driver (v1.1.0)
[ 4.629028] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 4.629035] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 4.629046] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.629054] nouveau 0000:01:00.0: setting latency timer to 64
[ 4.631355] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
[ 4.638843] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 4.660115] r852 0000:09:09.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.663396] r852: Non dma capable device detected, dma disabled
[ 4.663425] r852: driver loaded successfully
[ 4.728189] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 4.728195] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 4.728198] [drm] nouveau 0000:01:00.0: Bios version 60.86.4f.00
[ 4.728203] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 4.728205] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 4.728208] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 4.728212] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00000034
[ 4.728215] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 4.728218] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
[ 4.728221] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080
[ 4.728223] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
[ 4.728227] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[ 4.728231] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[ 4.728235] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 4.728238] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
[ 4.728241] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
[ 4.728245] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff
[ 4.728248] [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff
[ 4.728254] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC581
[ 4.751487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8D1
[ 4.767845] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD512
[ 4.767855] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD604
[ 4.768931] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
[ 4.768933] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD863
[ 4.783649] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 4.783652] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 4.783734] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.783750] iwl3945 0000:02:00.0: setting latency timer to 64
[ 4.788943] [drm] nouveau 0000:01:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
[ 4.808414] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 4.808421] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 1150mV fanspeed 100% timing 0
[ 4.808426] [drm] nouveau 0000:01:00.0: 1: memory 200MHz core 275MHz shader 550MHz voltage 1150mV fanspeed 100% timing 1
[ 4.808432] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1200mV fanspeed 100% timing 3
[ 4.808451] [drm] nouveau 0000:01:00.0: c: memory 199MHz core 275MHz shader 550MHz voltage 1200mV
[ 4.810122] [TTM] Zone kernel: Available graphics memory: 1546316 kiB.
[ 4.810125] [TTM] Initializing pool allocator.
[ 4.810148] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 4.816384] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.836699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.836784] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4.836842] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.845258] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 4.845263] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 4.845413] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
[ 4.845721] Registered led device: phy0-led
[ 4.882355] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 4.882624] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 4.882627] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 4.882815] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 4.885055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.885059] [drm] No driver support for vblank timestamp query.
[ 4.900126] firewire_core: created device fw0: GUID 00241b00e8a3be00, S400
[ 5.098009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 5.101986] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40000000, bo ffff8800b9a04800
[ 5.102069] fbcon: nouveaufb (fb0) is primary device
[ 5.111353] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
[ 5.167210] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.167290] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.218616] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 5.421315] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 5.422661] sd 5:0:0:0: [sdc] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 5.423168] sd 5:0:0:0: [sdc] Write Protect is off
[ 5.423172] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 5.423672] sd 5:0:0:0: [sdc] No Caching mode page present
[ 5.423675] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 5.429540] sd 5:0:0:0: [sdc] No Caching mode page present
[ 5.429543] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 5.430063] sdc: sdc1
[ 5.432036] sd 5:0:0:0: [sdc] No Caching mode page present
[ 5.432040] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 5.432042] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 6.160954] Console: switching to colour frame buffer device 180x56
[ 6.163432] fb0: nouveaufb frame buffer device
[ 6.163434] drm: registered panic notifier
[ 6.163442] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 6.732886] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 6.950620] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.966588] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.084796] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
[ 9.143563] r8169 0000:08:00.0: eth0: link down
[ 9.143572] r8169 0000:08:00.0: eth0: link down
[ 11.625158] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
[ 13.659460] NET: Registered protocol family 10
[ 13.660273] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.660460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.816958] FS-Cache: Loaded
[ 13.841072] FS-Cache: Netfs 'cifs' registered for caching
[ 13.871446] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.880618] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.884067] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.897017] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.901572] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.913913] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.917007] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.930569] CIFS VFS: cifs_mount failed w/return code = -101
[ 16.370722] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
[ 16.372460] wlan0: authenticated
[ 16.375907] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
[ 16.386877] wlan0: RX AssocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
[ 16.386885] wlan0: associated
[ 16.389143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.491123] Intel AES-NI instructions are not detected.
[ 16.677727] padlock_aes: VIA PadLock not detected.
[ 27.296946] wlan0: no IPv6 routers present
[ 50.863694] r8169 0000:08:00.0: eth0: link up
[ 50.864363] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.661658] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
[ 61.110061] eth0: no IPv6 routers present
[ 356.785500] wlan0: deauthenticated from 00:26:4d:36:95:d0 (Reason: 3)
[ 356.840075] cfg80211: Calling CRDA for country: DE
[ 360.656160] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
[ 360.658086] wlan0: authenticated
[ 360.658215] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
[ 360.670543] wlan0: RX ReassocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
[ 360.670550] wlan0: associatedThe slow startup would not be a problem but netfs and mpd do not like it when the network is not up when they start (mpd music dir is on a network share), so I have to manually restart netfs every time I reboot.
Other computers on the same network do not have the same problem, so I do not think it has anything to with the router.
Is there anything I can do to make my ethernet card initialize faster?
If you need any more information, please ask.
Last edited by rtoijala (2011-11-07 14:32:27)
Offline
#2 2011-11-06 23:52:31
- Strike0
- Member
- From: Germany
- Registered: 2011-09-05
- Posts: 1,489
Re: Realtek ethernet initialization slow [SOLVED]
Hi,
that is definetely much too long yes.
I'm not very versed with netcfg profiles, but dont you need some sort of dhcp client/or daemon for that as well?
Try adding dhcpd to your rc.conf array. Alternatively check this: https://wiki.archlinux.org/index.php/Ne … _of_dhcpcd
If both do not help: what happens if you pull the network cable after it got the link, wait until network is unreachable and then plug it in again? Does that take 40 seconds as well for the new dhcp lease?
Offline
#3 2011-11-07 13:18:56
- ratcheer
- Member
- Registered: 2011-10-09
- Posts: 924
Re: Realtek ethernet initialization slow [SOLVED]
What driver is your kernel loading? I have a very similar Realtek ethernet controller and it does not work well at all with the kernel's default r8169 driver. I had to go to Realtek's website and download the older driver r8168, which works perfectly for me.
Tim
Offline
#4 2011-11-07 14:24:07
- rtoijala
- Member
- Registered: 2011-09-11
- Posts: 36
Re: Realtek ethernet initialization slow [SOLVED]
Strike0 wrote:
... but dont you need some sort of dhcp client/or daemon for that as well?
Try adding dhcpd to your rc.conf array.
Netcfg seems to automatically start dhcpcd (I can see it htop).
Strike0 wrote:
Alternatively check this: https://wiki.archlinux.org/index.php/Ne … _of_dhcpcd
This did not change the time. The only change was that netcfg started dhclient instead of dhcpcd.
Strike0 wrote:
what happens if you pull the network cable after it got the link, wait until network is unreachable and then plug it in again? Does that take 40 seconds as well for the new dhcp lease?
Yes, it takes 40-60 seconds to get a connection after plugging the cable in again.
ratcheer wrote:
What driver is your kernel loading? I have a very similar Realtek ethernet controller and it does not work well at all with the kernel's default r8169 driver. I had to go to Realtek's website and download the older driver r8168, which works perfectly for me.
My kernel is loading r8169. r8168 is available in the AUR. I'm going to try it as soon as I can.
Thanks.
EDIT: r8168 needed only 10 seconds from loading the driver to having a connection. Thank you for the tip! Including [SOLVED] in thread topic.
Last edited by rtoijala (2011-11-07 14:32:47)
Offline
#5 2011-11-08 02:53:22
- ratcheer
- Member
- Registered: 2011-10-09
- Posts: 924
Re: Realtek ethernet initialization slow [SOLVED]
You are welcome, rtoijola. I'm glad I could help.
Tim
Offline
#6 2011-11-09 01:02:31
- ratcheer
- Member
- Registered: 2011-10-09
- Posts: 924
Re: Realtek ethernet initialization slow [SOLVED]
So, I was able to help you, but I cannot get it to work on my own system. I downloaded the r8168 tarball from AUR, extracted, ran makepkg -s, and sudo pacman -U <the .xz file>. Everything seemed to work perfectly. Then I rebooted.
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 42
I/O ports at ee00 [size=256]
Memory at fbeff000 (64-bit, prefetchable) [size=4K]
Memory at fbef8000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
Kernel driver in use: r8168
Kernel modules: r8169, r8168
But, I still cannot use the wired connection. I'm not sure what I need to look at, next.
Tim
Offline
#7 2011-11-09 12:21:45
- ratcheer
- Member
- Registered: 2011-10-09
- Posts: 924
Re: Realtek ethernet initialization slow [SOLVED]
ratcheer wrote:
So, I was able to help you, but I cannot get it to work on my own system. ...
But, I still cannot use the wired connection. I'm not sure what I need to look at, next.
Never mind. I think a may have a network hardware problem. Back to wireless.
Tim
Offline
#8 2011-11-11 13:05:52
- ratcheer
- Member
- Registered: 2011-10-09
- Posts: 924
Re: Realtek ethernet initialization slow [SOLVED]
ratcheer wrote:
Never mind. I think a may have a network hardware problem. Back to wireless.
I fixed my hardware problem and, right now, r8169 seems to be working fine. I'm keeping my fingers crossed, as it has never worked with any other version of Linux. However, I do remember reading something in the kernel discussions a few months ago that they thought it might be fixed in kernel 3.1.
Tim
Offline
#9 2011-11-12 00:40:07
- Strike0
- Member
- From: Germany
- Registered: 2011-09-05
- Posts: 1,489
Re: Realtek ethernet initialization slow [SOLVED]
Good that you fixed it. Yet the rest sounds disturbing. I was not aware there are such serious issues with wired chipsets from the bulk manufactureres as well still. But that was obviously a bit naive.
Offline
#10 2011-11-12 01:12:29
- Gusar
- Member
- Registered: 2009-08-25
- Posts: 3,607
Re: Realtek ethernet initialization slow [SOLVED]
Strike0 wrote:
Good that you fixed it. Yet the rest sounds disturbing. I was not aware there are such serious issues with wired chipsets from the bulk manufactureres as well still. But that was obviously a bit naive.
Yeah, I've been using Realtek wired chips since forever. So much that I started to believe they're the only ones making them. And I never had a problem with them either. Wired was something I could always, and I really mean *always* 100% rely on that it'll work.
Offline
#11 2011-11-17 22:43:35
- student975
- Member
- From: Russian Federation
- Registered: 2011-03-05
- Posts: 616
Re: Realtek ethernet initialization slow [SOLVED]
ratcheer wrote:
However, I do remember reading something in the kernel discussions a few months ago that they thought it might be fixed in kernel 3.1.
At my case I haven't system hang anymore with 3.1 and r8169 (earlier I have also forced to switch to r8168 from aur). Kernel log is still flooded with 'link up' messages.
BTW, I have noticed r8168 is in [community] now.
"I exist" is the best myth I know..
Offline