You are not logged in.

Pages: 1

#1 2011-11-22 23:40:11

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,719
Website

/etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

Topic says it all:

$ cat /etc/modprobe.d/nouveau_blacklist_ck.conf
blacklist nouveau

$ lsmod | grep nouv
nouveau               709777  0 
ttm                    54808  1 nouveau
drm_kms_helper         25753  1 nouveau
drm                   185576  3 nouveau,ttm,drm_kms_helper
i2c_algo_bit            5199  1 nouveau
mxm_wmi                 1425  1 nouveau
video                  11133  1 nouveau
i2c_core               19495  6 nouveau,drm_kms_helper,drm,i2c_algo_bit,nvidia,i2c_i801
button                  4406  1 nouveau

Last edited by graysky (2011-11-24 13:37:34)

AUR packages • Zsh and other configs

Offline

#2 2011-11-22 23:53:10

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

Do you have nouveau in modprobe.conf or mkinitcpio.conf?

Offline

#3 2011-11-22 23:55:34

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,719
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

Nope... hmm

$ grep nouv /etc/modprobe.d/modprobe.conf
$ grep nouv /etc/mkinitcpio.conf

AUR packages • Zsh and other configs

Offline

#4 2011-11-23 06:06:54

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

lsinitcpio /boot/initramfs-linux.img | grep nouveau

grep nouveau /etc/rc.conf

Give what you have. To someone, it may be better than you dare to think.

Offline

#5 2011-11-24 02:23:39

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,719
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

@wonder - nope... other ideas are welcome... should I open a flyspray?

$ lsinitcpio /boot/initramfs-linux-ck.img | grep nouveau
$ grep nouveau /etc/rc.conf

Last edited by graysky (2011-11-24 02:24:15)

AUR packages • Zsh and other configs

Offline

#6 2011-11-24 02:27:31

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

Can you first rerun all the searches with '-i' flag to ignore case?

Offline

#7 2011-11-24 02:49:55

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,719
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

@karol - sure!

$ grep -i nouv /etc/modprobe.d/modprobe.conf 
$ grep -i  nouv /etc/mkinitcpio.conf
$ lsinitcpio /boot/initramfs-linux-ck.img | grep -i nouveau
$ grep -i nouveau /etc/rc.conf
$ grep -i /etc/modprobe.d/nouveau_blacklist_ck.conf 
$ grep -i nouv /etc/modprobe.d/nouveau_blacklist_ck.conf 
blacklist nouveau

AUR packages • Zsh and other configs

Offline

#8 2011-11-24 03:04:31

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,719
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

Hold on guys.... the problem seems to be xorg.  If I boot runlevel 3, no nouveau.  As soon as I start X:

$ grep -i nouveau /var/log/Xorg.0.log
[    60.195] (==) Matched nouveau as autoconfigured driver 0
[    60.195] (II) LoadModule: "nouveau"
[    60.196] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    60.198] (II) Module nouveau: vendor="X.Org Foundation"
[    60.241] (II) NOUVEAU driver 
[    60.241] (II) NOUVEAU driver for NVIDIA chipset families :

But it is the nvidia modules that I am using:

$ grep -i nvidia /var/log/Xorg.0.log
[    60.192] (II) Module glx: vendor="NVIDIA Corporation"
[    60.192] (II) NVIDIA GLX Module  290.10  Wed Nov 16 18:01:24 PST 2011
[    60.195] (==) Matched nvidia as autoconfigured driver 2
[    60.212] (II) LoadModule: "nvidia"
[    60.212] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    60.219] (II) Module nvidia: vendor="NVIDIA Corporation"
[    60.241] (II) NOUVEAU driver for NVIDIA chipset families :
[    60.242] (II) NVIDIA dlloader X Driver  290.10  Wed Nov 16 17:41:10 PST 2011
[    60.242] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    60.422] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    60.423] (II) NVIDIA(0): Creating default Display subsection in Screen section
[    60.423] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    60.423] (==) NVIDIA(0): RGB weight 888
[    60.423] (==) NVIDIA(0): Default visual is TrueColor
[    60.423] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    60.423] (**) NVIDIA(0): Enabling 2D acceleration
[    61.535] (II) NVIDIA(GPU-0): Display (Ancor Communications Inc ASUS MS228 (DFP-2)) does not
[    61.535] (II) NVIDIA(GPU-0):     support NVIDIA 3D Vision stereo.
[    61.536] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF106) at PCI:1:0:0 (GPU-0)
[    61.536] (--) NVIDIA(0): Memory: 1048576 kBytes
[    61.536] (--) NVIDIA(0): VideoBIOS: 70.06.1f.00.21
[    61.536] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    61.536] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    61.536] (--) NVIDIA(0): Connected display device(s) on GeForce GTS 450 at PCI:1:0:0
[    61.536] (--) NVIDIA(0):     Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.536] (--) NVIDIA(0): Ancor Communications Inc ASUS MS228 (DFP-2): 330.0 MHz maximum
[    61.536] (--) NVIDIA(0):     pixel clock
[    61.536] (--) NVIDIA(0): Ancor Communications Inc ASUS MS228 (DFP-2): Internal Dual
[    61.536] (--) NVIDIA(0):     Link TMDS
[    61.574] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[    61.574] (**) NVIDIA(0):     enabled on all display devices.
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "1280x720" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.574] (WW) NVIDIA(0):     "1280x720".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "720x576" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode "720x576".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "720x576" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode "720x576".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "720x576" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode "720x576".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "1280x720" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.574] (WW) NVIDIA(0):     "1280x720".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "1920x1080" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid HorizSync range
[    61.574] (WW) NVIDIA(0):     (30.000-83.000 kHz) would exclude this mode's HorizSync
[    61.574] (WW) NVIDIA(0):     (28.1 kHz); ignoring HorizSync check for mode
[    61.574] (WW) NVIDIA(0):     "1920x1080".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "1920x1080" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.574] (WW) NVIDIA(0):     "1920x1080".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "1440x576" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.574] (WW) NVIDIA(0):     "1440x576".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "1440x576" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.574] (WW) NVIDIA(0):     "1440x576".
[    61.574] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.574] (WW) NVIDIA(0):     contradicts itself: mode "1920x1080" is specified in the
[    61.574] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.574] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.574] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.574] (WW) NVIDIA(0):     "1920x1080".
[    61.575] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.575] (WW) NVIDIA(0):     contradicts itself: mode "1280x720" is specified in the
[    61.575] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.575] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.575] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.575] (WW) NVIDIA(0):     "1280x720".
[    61.575] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.575] (WW) NVIDIA(0):     contradicts itself: mode "720x576" is specified in the
[    61.575] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.575] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.575] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode "720x576".
[    61.576] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.576] (WW) NVIDIA(0):     contradicts itself: mode "720x576" is specified in the
[    61.576] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.576] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.576] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode "720x576".
[    61.576] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.576] (WW) NVIDIA(0):     contradicts itself: mode "720x576" is specified in the
[    61.576] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.576] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.576] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode "720x576".
[    61.577] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.577] (WW) NVIDIA(0):     contradicts itself: mode "1280x720" is specified in the
[    61.577] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.577] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.577] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.577] (WW) NVIDIA(0):     "1280x720".
[    61.577] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.577] (WW) NVIDIA(0):     contradicts itself: mode "1920x1080" is specified in the
[    61.577] (WW) NVIDIA(0):     EDID; however, the EDID's valid HorizSync range
[    61.577] (WW) NVIDIA(0):     (30.000-83.000 kHz) would exclude this mode's HorizSync
[    61.577] (WW) NVIDIA(0):     (28.1 kHz); ignoring HorizSync check for mode
[    61.577] (WW) NVIDIA(0):     "1920x1080".
[    61.577] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.577] (WW) NVIDIA(0):     contradicts itself: mode "1920x1080" is specified in the
[    61.577] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.577] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.577] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.577] (WW) NVIDIA(0):     "1920x1080".
[    61.578] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.578] (WW) NVIDIA(0):     contradicts itself: mode "1440x576" is specified in the
[    61.578] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.578] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.578] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.578] (WW) NVIDIA(0):     "1440x576".
[    61.578] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.578] (WW) NVIDIA(0):     contradicts itself: mode "1440x576" is specified in the
[    61.578] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.578] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.578] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.578] (WW) NVIDIA(0):     "1440x576".
[    61.578] (WW) NVIDIA(0): The EDID for Ancor Communications Inc ASUS MS228 (DFP-2)
[    61.578] (WW) NVIDIA(0):     contradicts itself: mode "1920x1080" is specified in the
[    61.578] (WW) NVIDIA(0):     EDID; however, the EDID's valid VertRefresh range
[    61.578] (WW) NVIDIA(0):     (55.000-75.000 Hz) would exclude this mode's VertRefresh
[    61.578] (WW) NVIDIA(0):     (50.0 Hz); ignoring VertRefresh check for mode
[    61.578] (WW) NVIDIA(0):     "1920x1080".
[    61.598] (II) NVIDIA(0): Assigned Display Device: DFP-2
[    61.598] (==) NVIDIA(0): 
[    61.598] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    61.598] (==) NVIDIA(0):     will be used as the requested mode.
[    61.598] (==) NVIDIA(0): 
[    61.598] (II) NVIDIA(0): Validated modes:
[    61.598] (II) NVIDIA(0):     "nvidia-auto-select"
[    61.598] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    61.620] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[    61.620] (--) NVIDIA(0):     option
[    61.620] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    61.620] (II) NVIDIA:     access.
[    61.623] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    61.623] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    61.623] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    61.623] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    61.623] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    61.623] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    61.623] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    61.623] (II) NVIDIA(0):     Config Options in the README.
[    61.626] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    61.711] (==) NVIDIA(0): Disabling shared memory pixmaps
[    61.711] (==) NVIDIA(0): Backing store disabled
[    61.711] (==) NVIDIA(0): Silken mouse enabled
[    61.711] (==) NVIDIA(0): DPMS enabled
[    61.711] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "CRT", but no
[    61.711] (WW) NVIDIA(0):     such display device could be found, or all display devices
[    61.711] (WW) NVIDIA(0):     by that name are currently unavailable.
[    61.711] (WW) NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such
[    61.711] (WW) NVIDIA(0):     display device could be found, or all display devices by
[    61.711] (WW) NVIDIA(0):     that name are currently unavailable.
[    61.712] (II) NVIDIA(0): [DRI2] Setup complete
[    61.712] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    61.787] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event10)
[    61.787] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event7)
[    61.788] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event8)
[    61.788] (II) config/udev: Adding input device HDA NVidia HDMI/DP (/dev/input/event9)

AUR packages • Zsh and other configs

Offline

#9 2011-11-24 04:38:42

bangkok_manouel
Member
From: indicates a starting point
Registered: 2005-02-07
Posts: 1,556

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

http://projects.archlinux.org/svntogit/ … org-server ?

Offline

#10 2011-11-24 08:29:13

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

do you have nouveau-dri installed AND nvidia-utils?  because that is impossible

Give what you have. To someone, it may be better than you dare to think.

Offline

#11 2011-11-24 08:48:19

bangkok_manouel
Member
From: indicates a starting point
Registered: 2005-02-07
Posts: 1,556

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

i think having xf86-video-nouveau and nvidia installed with the *ahem* magic patch should be enough to get this behavior. install xf86-video-nv and you'll get 3 different drivers loaded.

Offline

#12 2011-11-24 09:00:14

wonder
Developer
From: Bucharest, Romania
Registered: 2006-07-05
Posts: 5,941
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

bangkok_manouel wrote:

i think having xf86-video-nouveau and nvidia installed with the *ahem* magic patch should be enough to get this behavior. install xf86-video-nv and you'll get 3 different drivers loaded.

nope. only if it has nouveau-dri

Give what you have. To someone, it may be better than you dare to think.

Offline

#13 2011-11-24 13:02:53

graysky
Wiki Maintainer
From: :wq
Registered: 2008-12-01
Posts: 10,719
Website

Re: /etc/modprobe.d/nouveau_blacklist.conf NOT being honored [SOLVED]

I don't have nouveau-dri:

$ pacman -Qq | grep dri
dri2proto
xorg-xdriinfo

BUT I do have:

$ pacman -Qq | grep nouv
xf86-video-nouveau

After removing it, and rebooting, problem solved:

$ lsmod | grep nouv

Is this a bug and should I open a ticket?  I would think both drivers should be able to co-exist (with one lying dormant) on a system without this behavior.

Last edited by graysky (2011-11-24 13:39:19)

AUR packages • Zsh and other configs

Offline

Pages: 1

Board footer

Powered by FluxBB