You are not logged in.
Pages: 1
Hi all!,:D
When i'm going to open my extranal hard(with :USB 2 or eSATA)
An error occurred while accessing 'baba', the system responded: The requested operation has failed.: Error mounting: mount exited with exit code 13: Incomplete multi-sector transfer: magic: 0x454c4946 size: 1024 usa_ofs: 48 usa_count: 0 data: 568 usn: 569: Input/output error
$MFT error: Incomplete multi sector transfer detected in '$Volume'.
Failed to mount '/dev/sdc1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
Offline
What happens when you try to manually mount the drive?
Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD
Offline
Mount answer:
Incomplete multi-sector transfer: magic: 0x454c4946 size: 1024 usa_ofs: 48 usa_count: 0 data: 568 usn: 569: Input/output error
$MFT error: Incomplete multi sector transfer detected in '$Volume'.
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.
Offline
Might need to run
chkdsk /R
since this is a windows closed filesystem not a whole can be done in linux for this. There are a few tools but nothing complete.
Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD
Offline
-bash: chkdisk: command not found
!!!!
Last edited by h2010n (2012-01-25 19:45:37)
Offline
-bash: chkdisk: command not found
!!!!
NTFS is a windows filesystem, you will need windows to run that command.
Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD
Offline
this command format my hard?
Offline
this command format my hard?
Should not format anything. I should only check the filesystem and try to fix any errors.
Linux ArchLinux 3.2.8-1-ARCH
#1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012 x86_64 AMD FX(tm)-8120 Eight-Core Processor AuthenticAMD GNU/Linux
8192MB DDR3 1300MHz | Asus m5a97 | GeForce GTX 550 Ti | 120 GB SSD
Offline
Thanks!
Offline
Pages: 1