You are not logged in.
- Topics: Active | Unanswered
#1 2012-03-07 14:42:12
- devourer
- Member
- Registered: 2009-10-21
- Posts: 13
Unable to fit whole desktop screen on HDTV
Greetings,
I have an old MacMini (model 2,1) hooked up to a 55" HDTV with a DVI-to-HDMI cable and I've been trying my darndest to fit the whole desktop on the TV screen for days now without any success. 
I was wondering if anybody here could help me.
I get the following error when I try to do it manually:
arch@MacMini:[~]$ xrandr --output DVI1 --set underscan on
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 29
Current serial number in output stream: 29I'm not using an xorg.conf file and, for some reason, the kernel fails to recognize the maximum 1080p resolution, which is fine, since I prefer 720p anyway (easier to read web pages that way). What's really annoying, though, is that I can't see applications' menus when maximized or the taskbar at the bottom because those go out of screen range.
Specs:
arch@MacMini:[~]$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)arch@MacMini:[~]$ xrandr --prop
Screen 0: minimum 320 x 200, current 1280 x 720, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)
DVI1 connected 1280x720+0+0 (normal left inverted right x axis y axis) 16mm x 9mm
EDID:
00ffffffffffff003cad003700000000
0a120103801009780a6837a454489a25
0f4a4c3fef80d100d1c0811990590101
010101010101011d8018711c1620582c
250010090000009e011d007251d01e20
6e28550010090000001e000000fc0035
35575f4c43445f54560a2020000000fd
00313d0f2e08000a2020202020200126
02032471500102048506111314150307
12161f2010230907018301000066030c
001000808c0ad08a20e02d10103e9600
0403000000188c0aa01451f01600267c
4300040300000099011d80d0721c1620
102c258010090000009f011d00bc52d0
1e20b828554010090000001e00000000
000000000000000000000000000000f2
1280x720 60.0*
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
720x480 59.9
640x480 72.8 75.0 66.7 60.0
1920x1080_60.00 60.0
TV1 disconnected (normal left inverted right x axis y axis)
bottom margin: 37 (0x00000025) range: (0,100)
right margin: 46 (0x0000002e) range: (0,100)
top margin: 36 (0x00000024) range: (0,100)
left margin: 54 (0x00000036) range: (0,100)
mode: NTSC-M
supported: NTSC-M NTSC-443 NTSC-J PAL-M
PAL-N PAL 480p@59.94Hz 480p@60Hz
576p 720p@60Hz 720p@59.94Hz 720p@50Hz
1080i@50Hz 1080i@60Hz 1080i@59.94Harch@MacMini:[~]$ cat /var/log/Xorg.0.log
[ 14.104]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 14.104] X Protocol Version 11, Revision 0
[ 14.104] Build Operating System: Linux 3.2.2-1-ARCH i686
[ 14.104] Current Operating System: Linux MacMini 3.2.8-1-ARCH #1 SMP PREEMPT Mon Feb 27 22:13:59 UTC 2012 i686
[ 14.104] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/disk/by-uuid/ce324d17-0598-44b6-89e3-1b585c7493ca ro i915.modeset=1 quiet
[ 14.104] Build Date: 29 January 2012 03:41:53PM
[ 14.104]
[ 14.104] Current version of pixman: 0.24.4
[ 14.104] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.104] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.104] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 7 15:24:28 2012
[ 14.139] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14.158] (==) No Layout section. Using the first Screen section.
[ 14.158] (==) No screen section available. Using defaults.
[ 14.158] (**) |-->Screen "Default Screen Section" (0)
[ 14.158] (**) | |-->Monitor "<default monitor>"
[ 14.159] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.159] (==) Automatically adding devices
[ 14.159] (==) Automatically enabling devices
[ 14.214] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14.214] Entry deleted from font path.
[ 14.214] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 14.214] Entry deleted from font path.
[ 14.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 14.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.246] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.253] (II) Loader magic: 0x8228580
[ 14.253] (II) Module ABI versions:
[ 14.253] X.Org ANSI C Emulation: 0.4
[ 14.253] X.Org Video Driver: 11.0
[ 14.253] X.Org XInput driver : 13.0
[ 14.253] X.Org Server Extension : 6.0
[ 14.254] (--) PCI:*(0:0:2:0) 8086:27a2:8086:7270 rev 3, Mem @ 0x50380000/524288, 0x40000000/268435456, 0x50400000/262144, I/O @ 0x000020f0/8
[ 14.254] (--) PCI: (0:0:2:1) 8086:27a6:8086:7270 rev 3, Mem @ 0x50300000/524288
[ 14.254] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 14.254] (II) LoadModule: "extmod"
[ 14.266] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 14.274] (II) Module extmod: vendor="X.Org Foundation"
[ 14.274] compiled for 1.11.4, module version = 1.0.0
[ 14.274] Module class: X.Org Server Extension
[ 14.274] ABI class: X.Org Server Extension, version 6.0
[ 14.274] (II) Loading extension MIT-SCREEN-SAVER
[ 14.274] (II) Loading extension XFree86-VidModeExtension
[ 14.274] (II) Loading extension XFree86-DGA
[ 14.274] (II) Loading extension DPMS
[ 14.274] (II) Loading extension XVideo
[ 14.274] (II) Loading extension XVideo-MotionCompensation
[ 14.274] (II) Loading extension X-Resource
[ 14.274] (II) LoadModule: "dbe"
[ 14.274] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 14.277] (II) Module dbe: vendor="X.Org Foundation"
[ 14.277] compiled for 1.11.4, module version = 1.0.0
[ 14.277] Module class: X.Org Server Extension
[ 14.277] ABI class: X.Org Server Extension, version 6.0
[ 14.277] (II) Loading extension DOUBLE-BUFFER
[ 14.277] (II) LoadModule: "glx"
[ 14.277] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.297] (II) Module glx: vendor="X.Org Foundation"
[ 14.297] compiled for 1.11.4, module version = 1.0.0
[ 14.297] ABI class: X.Org Server Extension, version 6.0
[ 14.297] (==) AIGLX enabled
[ 14.297] (II) Loading extension GLX
[ 14.297] (II) LoadModule: "record"
[ 14.297] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.298] (II) Module record: vendor="X.Org Foundation"
[ 14.298] compiled for 1.11.4, module version = 1.13.0
[ 14.298] Module class: X.Org Server Extension
[ 14.298] ABI class: X.Org Server Extension, version 6.0
[ 14.298] (II) Loading extension RECORD
[ 14.298] (II) LoadModule: "dri"
[ 14.298] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 14.314] (II) Module dri: vendor="X.Org Foundation"
[ 14.314] compiled for 1.11.4, module version = 1.0.0
[ 14.314] ABI class: X.Org Server Extension, version 6.0
[ 14.314] (II) Loading extension XFree86-DRI
[ 14.314] (II) LoadModule: "dri2"
[ 14.314] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.315] (II) Module dri2: vendor="X.Org Foundation"
[ 14.315] compiled for 1.11.4, module version = 1.2.0
[ 14.315] ABI class: X.Org Server Extension, version 6.0
[ 14.315] (II) Loading extension DRI2
[ 14.315] (==) Matched intel as autoconfigured driver 0
[ 14.315] (==) Matched vesa as autoconfigured driver 1
[ 14.315] (==) Matched fbdev as autoconfigured driver 2
[ 14.315] (==) Assigned the driver to the xf86ConfigLayout
[ 14.315] (II) LoadModule: "intel"
[ 14.346] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14.375] (II) Module intel: vendor="X.Org Foundation"
[ 14.375] compiled for 1.11.2, module version = 2.17.0
[ 14.375] Module class: X.Org Video Driver
[ 14.375] ABI class: X.Org Video Driver, version 11.0
[ 14.375] (II) LoadModule: "vesa"
[ 14.376] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 14.388] (II) Module vesa: vendor="X.Org Foundation"
[ 14.388] compiled for 1.11.1, module version = 2.3.0
[ 14.388] Module class: X.Org Video Driver
[ 14.388] ABI class: X.Org Video Driver, version 11.0
[ 14.388] (II) LoadModule: "fbdev"
[ 14.389] (WW) Warning, couldn't open module fbdev
[ 14.389] (II) UnloadModule: "fbdev"
[ 14.389] (II) Unloading fbdev
[ 14.389] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 14.389] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 14.389] (II) VESA: driver for VESA chipsets: vesa
[ 14.389] (++) using VT number 7
[ 14.397] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 14.397] (WW) Falling back to old probe method for vesa
[ 14.397] drmOpenDevice: node name is /dev/dri/card0
[ 14.397] drmOpenDevice: open result is 8, (OK)
[ 14.397] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 14.397] drmOpenDevice: node name is /dev/dri/card0
[ 14.397] drmOpenDevice: open result is 8, (OK)
[ 14.397] drmOpenByBusid: drmOpenMinor returns 8
[ 14.397] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 14.397] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.397] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 14.397] (==) intel(0): RGB weight 888
[ 14.397] (==) intel(0): Default visual is TrueColor
[ 14.397] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 14.397] (--) intel(0): Chipset: "945GM"
[ 14.397] (**) intel(0): Relaxed fencing disabled
[ 14.397] (**) intel(0): Wait on SwapBuffers? enabled
[ 14.397] (**) intel(0): Triple buffering? enabled
[ 14.397] (**) intel(0): Framebuffer tiled
[ 14.397] (**) intel(0): Pixmaps tiled
[ 14.397] (**) intel(0): 3D buffers tiled
[ 14.397] (**) intel(0): SwapBuffers wait enabled
[ 14.397] (==) intel(0): video overlay key set to 0x101fe
[ 14.416] (II) intel(0): Output VGA1 has no monitor section
[ 14.692] (II) intel(0): Output DVI1 has no monitor section
[ 15.000] (II) intel(0): Output TV1 has no monitor section
[ 15.013] (II) intel(0): EDID for output VGA1
[ 15.289] (II) Quirked EDID physical size to 2x1 cm
[ 15.289] (II) intel(0): EDID for output DVI1
[ 15.289] (II) intel(0): Manufacturer: OEM Model: 3700 Serial#: 0
[ 15.289] (II) intel(0): Year: 2008 Week: 10
[ 15.289] (II) intel(0): EDID Version: 1.3
[ 15.289] (II) intel(0): Digital Display Input
[ 15.289] (II) intel(0): Max Image Size [cm]: horiz.: 2 vert.: 1
[ 15.289] (II) intel(0): Gamma: 2.20
[ 15.289] (II) intel(0): No DPMS capabilities specified
[ 15.289] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 15.289] (II) intel(0): First detailed timing is preferred mode
[ 15.289] (II) intel(0): redX: 0.642 redY: 0.330 greenX: 0.283 greenY: 0.602
[ 15.289] (II) intel(0): blueX: 0.145 blueY: 0.062 whiteX: 0.290 whiteY: 0.300
[ 15.289] (II) intel(0): Supported established timings:
[ 15.289] (II) intel(0): 640x480@60Hz
[ 15.289] (II) intel(0): 640x480@67Hz
[ 15.289] (II) intel(0): 640x480@72Hz
[ 15.289] (II) intel(0): 640x480@75Hz
[ 15.289] (II) intel(0): 800x600@56Hz
[ 15.289] (II) intel(0): 800x600@60Hz
[ 15.289] (II) intel(0): 800x600@72Hz
[ 15.289] (II) intel(0): 800x600@75Hz
[ 15.289] (II) intel(0): 832x624@75Hz
[ 15.289] (II) intel(0): 1024x768@60Hz
[ 15.289] (II) intel(0): 1024x768@70Hz
[ 15.289] (II) intel(0): 1024x768@75Hz
[ 15.289] (II) intel(0): 1280x1024@75Hz
[ 15.289] (II) intel(0): 1152x864@75Hz
[ 15.289] (II) intel(0): Manufacturer's mask: 0
[ 15.289] (II) intel(0): Supported standard timings:
[ 15.289] (II) intel(0): #0: hsize: 1920 vsize 1200 refresh: 60 vid: 209
[ 15.289] (II) intel(0): #1: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 15.289] (II) intel(0): #2: hsize: 1280 vsize 800 refresh: 85 vid: 6529
[ 15.289] (II) intel(0): #3: hsize: 1400 vsize 1050 refresh: 85 vid: 22928
[ 15.289] (II) intel(0): Supported detailed timing:
[ 15.289] (II) intel(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 15.289] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 15.289] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 15.289] (II) intel(0): Supported detailed timing:
[ 15.289] (II) intel(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 15.289] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 15.289] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 15.289] (II) intel(0): Monitor name: 55W_LCD_TV
[ 15.289] (II) intel(0): Ranges: V min: 49 V max: 61 Hz, H min: 15 H max: 46 kHz, PixClock max 85 MHz
[ 15.289] (II) intel(0): Supported detailed timing:
[ 15.289] (II) intel(0): clock: 27.0 MHz Image Size: 4 x 3 mm
[ 15.289] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 15.289] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 15.289] (II) intel(0): Supported detailed timing:
[ 15.289] (II) intel(0): clock: 27.0 MHz Image Size: 4 x 3 mm
[ 15.289] (II) intel(0): h_active: 1440 h_sync: 1478 h_sync_end 1602 h_blank_end 1716 h_border: 0
[ 15.289] (II) intel(0): v_active: 240 v_sync: 244 v_sync_end 247 v_blanking: 262 v_border: 0
[ 15.289] (II) intel(0): Supported detailed timing:
[ 15.289] (II) intel(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 15.289] (II) intel(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 15.289] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 15.289] (II) intel(0): Supported detailed timing:
[ 15.289] (II) intel(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 15.289] (II) intel(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 15.289] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 15.289] (II) intel(0): Number of EDID sections to follow: 1
[ 15.289] (II) intel(0): EDID (in hex):
[ 15.289] (II) intel(0): 00ffffffffffff003cad003700000000
[ 15.289] (II) intel(0): 0a120103801009780a6837a454489a25
[ 15.289] (II) intel(0): 0f4a4c3fef80d100d1c0811990590101
[ 15.290] (II) intel(0): 010101010101011d8018711c1620582c
[ 15.290] (II) intel(0): 250010090000009e011d007251d01e20
[ 15.290] (II) intel(0): 6e28550010090000001e000000fc0035
[ 15.290] (II) intel(0): 35575f4c43445f54560a2020000000fd
[ 15.290] (II) intel(0): 00313d0f2e08000a2020202020200126
[ 15.290] (II) intel(0): 02032471500102048506111314150307
[ 15.290] (II) intel(0): 12161f2010230907018301000066030c
[ 15.290] (II) intel(0): 001000808c0ad08a20e02d10103e9600
[ 15.290] (II) intel(0): 0403000000188c0aa01451f01600267c
[ 15.290] (II) intel(0): 4300040300000099011d80d0721c1620
[ 15.290] (II) intel(0): 102c258010090000009f011d00bc52d0
[ 15.290] (II) intel(0): 1e20b828554010090000001e00000000
[ 15.290] (II) intel(0): 000000000000000000000000000000f2
[ 15.290] (II) intel(0): Not using mode "1280x1024" (bad mode clock/interlace/doublescan)
[ 15.290] (II) intel(0): Not using mode "1280x800" (bad mode clock/interlace/doublescan)
[ 15.290] (II) intel(0): Not using mode "1152x864" (bad mode clock/interlace/doublescan)
[ 15.290] (II) intel(0): Printing probed modes for output DVI1
[ 15.290] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 15.290] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 15.290] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 15.290] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.290] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 15.290] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 15.290] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 15.290] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.290] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 15.290] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 15.290] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 15.290] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 15.290] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 15.290] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15.593] (II) intel(0): EDID for output TV1
[ 15.593] (II) intel(0): Output VGA1 disconnected
[ 15.593] (II) intel(0): Output DVI1 connected
[ 15.593] (II) intel(0): Output TV1 disconnected
[ 15.593] (II) intel(0): Using exact sizes for initial modes
[ 15.593] (II) intel(0): Output DVI1 using initial mode 1280x720
[ 15.593] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 15.593] (II) intel(0): Kernel page flipping support detected, enabling
[ 15.593] (==) intel(0): DPI set to (96, 96)
[ 15.593] (II) Loading sub module "fb"
[ 15.593] (II) LoadModule: "fb"
[ 15.594] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.618] (II) Module fb: vendor="X.Org Foundation"
[ 15.618] compiled for 1.11.4, module version = 1.0.0
[ 15.618] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.618] (II) Loading sub module "dri2"
[ 15.618] (II) LoadModule: "dri2"
[ 15.619] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.619] (II) Module dri2: vendor="X.Org Foundation"
[ 15.619] compiled for 1.11.4, module version = 1.2.0
[ 15.619] ABI class: X.Org Server Extension, version 6.0
[ 15.619] (II) UnloadModule: "vesa"
[ 15.619] (II) Unloading vesa
[ 15.619] (==) Depth 24 pixmap format is 32 bpp
[ 15.619] (II) intel(0): [DRI2] Setup complete
[ 15.619] (II) intel(0): [DRI2] DRI driver: i915
[ 15.619] (II) intel(0): Allocated new frame buffer 1280x720 stride 8192, tiled
[ 15.645] (II) UXA(0): Driver registered support for the following operations:
[ 15.645] (II) solid
[ 15.645] (II) copy
[ 15.645] (II) composite (RENDER acceleration)
[ 15.645] (II) put_image
[ 15.645] (II) get_image
[ 15.645] (==) intel(0): Backing store disabled
[ 15.645] (==) intel(0): Silken mouse enabled
[ 15.645] (II) intel(0): Initializing HW Cursor
[ 15.833] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15.833] (==) intel(0): DPMS enabled
[ 15.833] (==) intel(0): Intel XvMC decoder disabled
[ 15.833] (II) intel(0): Set up textured video
[ 15.833] (II) intel(0): Set up overlay video
[ 15.833] (II) intel(0): direct rendering: DRI2 Enabled
[ 15.833] (==) intel(0): hotplug detection: "enabled"
[ 15.833] (--) RandR disabled
[ 15.834] (II) Initializing built-in extension Generic Event Extension
[ 15.834] (II) Initializing built-in extension SHAPE
[ 15.834] (II) Initializing built-in extension MIT-SHM
[ 15.834] (II) Initializing built-in extension XInputExtension
[ 15.834] (II) Initializing built-in extension XTEST
[ 15.834] (II) Initializing built-in extension BIG-REQUESTS
[ 15.834] (II) Initializing built-in extension SYNC
[ 15.834] (II) Initializing built-in extension XKEYBOARD
[ 15.834] (II) Initializing built-in extension XC-MISC
[ 15.834] (II) Initializing built-in extension SECURITY
[ 15.834] (II) Initializing built-in extension XINERAMA
[ 15.834] (II) Initializing built-in extension XFIXES
[ 15.834] (II) Initializing built-in extension RENDER
[ 15.834] (II) Initializing built-in extension RANDR
[ 15.834] (II) Initializing built-in extension COMPOSITE
[ 15.834] (II) Initializing built-in extension DAMAGE
[ 15.959] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15.959] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15.959] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15.959] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 15.959] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15.959] (II) AIGLX: Loaded and initialized i915
[ 15.959] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15.960] (II) intel(0): Setting screen physical size to 338 x 190
[ 16.321] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.321] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.321] (II) LoadModule: "evdev"
[ 16.321] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.330] (II) Module evdev: vendor="X.Org Foundation"
[ 16.330] compiled for 1.10.99.902, module version = 2.6.0
[ 16.330] Module class: X.Org XInput Driver
[ 16.330] ABI class: X.Org XInput driver, version 13.0
[ 16.330] (II) Using input driver 'evdev' for 'Power Button'
[ 16.330] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.330] (**) Power Button: always reports core events
[ 16.330] (**) Power Button: Device: "/dev/input/event1"
[ 16.330] (--) Power Button: Found keys
[ 16.330] (II) Power Button: Configuring as keyboard
[ 16.330] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 16.330] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.330] (**) Option "xkb_rules" "evdev"
[ 16.330] (**) Option "xkb_model" "evdev"
[ 16.330] (**) Option "xkb_layout" "se"
[ 16.367] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 16.367] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.367] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.367] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.367] (**) Video Bus: always reports core events
[ 16.367] (**) Video Bus: Device: "/dev/input/event2"
[ 16.367] (--) Video Bus: Found keys
[ 16.367] (II) Video Bus: Configuring as keyboard
[ 16.367] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 16.367] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 16.367] (**) Option "xkb_rules" "evdev"
[ 16.367] (**) Option "xkb_model" "evdev"
[ 16.367] (**) Option "xkb_layout" "se"
[ 16.368] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.368] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.368] (II) Using input driver 'evdev' for 'Power Button'
[ 16.368] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.368] (**) Power Button: always reports core events
[ 16.368] (**) Power Button: Device: "/dev/input/event0"
[ 16.368] (--) Power Button: Found keys
[ 16.368] (II) Power Button: Configuring as keyboard
[ 16.368] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 16.368] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 16.368] (**) Option "xkb_rules" "evdev"
[ 16.368] (**) Option "xkb_model" "evdev"
[ 16.368] (**) Option "xkb_layout" "se"
[ 16.368] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[ 16.368] (II) No input driver specified, ignoring this device.
[ 16.368] (II) This device may have been added with another device file.
[ 16.369] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[ 16.369] (II) No input driver specified, ignoring this device.
[ 16.369] (II) This device may have been added with another device file.
[ 16.369] (II) config/udev: Adding input device 2.4 GHz RF Receiver (/dev/input/event3)
[ 16.369] (**) 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.369] (II) Using input driver 'evdev' for '2.4 GHz RF Receiver'
[ 16.369] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.369] (**) 2.4 GHz RF Receiver: always reports core events
[ 16.369] (**) 2.4 GHz RF Receiver: Device: "/dev/input/event3"
[ 16.369] (--) 2.4 GHz RF Receiver: Found keys
[ 16.369] (II) 2.4 GHz RF Receiver: Configuring as keyboard
[ 16.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3/event3"
[ 16.369] (II) XINPUT: Adding extended input device "2.4 GHz RF Receiver" (type: KEYBOARD, id 9)
[ 16.369] (**) Option "xkb_rules" "evdev"
[ 16.369] (**) Option "xkb_model" "evdev"
[ 16.369] (**) Option "xkb_layout" "se"
[ 16.370] (II) config/udev: Adding input device 2.4 GHz RF Receiver (/dev/input/event4)
[ 16.370] (**) 2.4 GHz RF Receiver: Applying InputClass "evdev pointer catchall"
[ 16.370] (**) 2.4 GHz RF Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.370] (II) Using input driver 'evdev' for '2.4 GHz RF Receiver'
[ 16.370] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.370] (**) 2.4 GHz RF Receiver: always reports core events
[ 16.370] (**) 2.4 GHz RF Receiver: Device: "/dev/input/event4"
[ 16.370] (--) 2.4 GHz RF Receiver: Found 3 mouse buttons
[ 16.370] (--) 2.4 GHz RF Receiver: Found scroll wheel(s)
[ 16.370] (--) 2.4 GHz RF Receiver: Found relative axes
[ 16.370] (--) 2.4 GHz RF Receiver: Found x and y relative axes
[ 16.370] (--) 2.4 GHz RF Receiver: Found absolute axes
[ 16.370] (--) 2.4 GHz RF Receiver: Found keys
[ 16.370] (II) 2.4 GHz RF Receiver: Configuring as mouse
[ 16.370] (II) 2.4 GHz RF Receiver: Configuring as keyboard
[ 16.370] (II) 2.4 GHz RF Receiver: Adding scrollwheel support
[ 16.370] (**) 2.4 GHz RF Receiver: YAxisMapping: buttons 4 and 5
[ 16.370] (**) 2.4 GHz RF Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.370] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4/event4"
[ 16.370] (II) XINPUT: Adding extended input device "2.4 GHz RF Receiver" (type: KEYBOARD, id 10)
[ 16.370] (**) Option "xkb_rules" "evdev"
[ 16.370] (**) Option "xkb_model" "evdev"
[ 16.370] (**) Option "xkb_layout" "se"
[ 16.371] (II) 2.4 GHz RF Receiver: initialized for relative axes.
[ 16.371] (WW) 2.4 GHz RF Receiver: ignoring absolute axes.
[ 16.371] (**) 2.4 GHz RF Receiver: (accel) keeping acceleration scheme 1
[ 16.371] (**) 2.4 GHz RF Receiver: (accel) acceleration profile 0
[ 16.371] (**) 2.4 GHz RF Receiver: (accel) acceleration factor: 2.000
[ 16.371] (**) 2.4 GHz RF Receiver: (accel) acceleration threshold: 4
[ 16.371] (II) config/udev: Adding input device 2.4 GHz RF Receiver (/dev/input/mouse0)
[ 16.371] (II) No input driver specified, ignoring this device.
[ 16.371] (II) This device may have been added with another device file.
[ 16.372] (II) config/udev: Adding input device HID 05ac:1000 (/dev/input/event5)
[ 16.372] (**) HID 05ac:1000: Applying InputClass "evdev keyboard catchall"
[ 16.372] (II) Using input driver 'evdev' for 'HID 05ac:1000'
[ 16.372] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.372] (**) HID 05ac:1000: always reports core events
[ 16.372] (**) HID 05ac:1000: Device: "/dev/input/event5"
[ 16.372] (--) HID 05ac:1000: Found keys
[ 16.372] (II) HID 05ac:1000: Configuring as keyboard
[ 16.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input5/event5"
[ 16.372] (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: KEYBOARD, id 11)
[ 16.372] (**) Option "xkb_rules" "evdev"
[ 16.372] (**) Option "xkb_model" "evdev"
[ 16.372] (**) Option "xkb_layout" "se"
[ 16.372] (II) config/udev: Adding input device HID 05ac:1000 (/dev/input/event6)
[ 16.372] (**) HID 05ac:1000: Applying InputClass "evdev pointer catchall"
[ 16.372] (II) Using input driver 'evdev' for 'HID 05ac:1000'
[ 16.372] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.372] (**) HID 05ac:1000: always reports core events
[ 16.372] (**) HID 05ac:1000: Device: "/dev/input/event6"
[ 16.373] (--) HID 05ac:1000: Found 9 mouse buttons
[ 16.373] (--) HID 05ac:1000: Found relative axes
[ 16.373] (--) HID 05ac:1000: Found x and y relative axes
[ 16.373] (II) HID 05ac:1000: Configuring as mouse
[ 16.373] (**) HID 05ac:1000: YAxisMapping: buttons 4 and 5
[ 16.373] (**) HID 05ac:1000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.373] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input6/event6"
[ 16.373] (II) XINPUT: Adding extended input device "HID 05ac:1000" (type: MOUSE, id 12)
[ 16.373] (II) HID 05ac:1000: initialized for relative axes.
[ 16.373] (**) HID 05ac:1000: (accel) keeping acceleration scheme 1
[ 16.373] (**) HID 05ac:1000: (accel) acceleration profile 0
[ 16.373] (**) HID 05ac:1000: (accel) acceleration factor: 2.000
[ 16.373] (**) HID 05ac:1000: (accel) acceleration threshold: 4
[ 16.373] (II) config/udev: Adding input device HID 05ac:1000 (/dev/input/mouse1)
[ 16.373] (II) No input driver specified, ignoring this device.
[ 16.373] (II) This device may have been added with another device file.
[ 16.373] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 16.373] (II) No input driver specified, ignoring this device.
[ 16.373] (II) This device may have been added with another device file.
[ 60.362] (II) Quirked EDID physical size to 2x1 cm
[ 60.362] (II) intel(0): EDID vendor "OEM", prod id 14080
[ 60.362] (II) intel(0): Using EDID range info for horizontal sync
[ 60.362] (II) intel(0): Using EDID range info for vertical refresh
[ 60.362] (II) intel(0): Printing DDC gathered Modelines:
[ 60.362] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 60.362] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 60.362] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 60.362] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 60.362] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[ 60.362] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 60.362] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 60.362] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 60.362] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 60.362] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 60.362] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 60.362] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 60.362] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 60.362] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 60.362] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 60.362] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 60.362] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 60.362] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 60.362] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 60.362] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 60.362] (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
[ 60.362] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 60.362] (II) intel(0): Modeline "1280x800"x0.0 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz)
[ 60.363] (II) intel(0): Modeline "1400x1050"x0.0 179.50 1400 1504 1656 1912 1050 1053 1057 1105 -hsync +vsync (93.9 kHz)
[ 60.363] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 60.363] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[ 60.363] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 60.363] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz)
[ 60.363] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz)
[ 60.363] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz)Any help would be greatly appreciated. 
Offline
#2 2012-03-07 14:51:37
- Ashren
- Member
- From: Denmark
- Registered: 2007-06-13
- Posts: 1,229
- Website
Re: Unable to fit whole desktop screen on HDTV
Have you set your TV to the "pc setting". My TV had one and it fixed my problem.
Offline
#3 2012-03-07 16:21:49
- devourer
- Member
- Registered: 2009-10-21
- Posts: 13
Re: Unable to fit whole desktop screen on HDTV
I changed the HDMI screen settings from "AUTO" to "FULL" using the remote control and that did the trick. When I tried that earlier, it didn't work for me, but now it did right away. Very odd, but I'm not one to complain.
Thanks for the help!
Offline