You are not logged in.
Recently I started having network problems with my lan. It seems that dhcpcd only tries getting ipv6 addresses and not ipv4, and I have no idea how to tell it to try also ipv4.
That's my dhcpcd output:
[root@arch-lap ~]# dhcpcd -B eth0
dhcpcd[2515]: open_control: Connection refused
dhcpcd[2515]: version 5.5.4 starting
dhcpcd[2515]: eth0: sending IPv6 Router Solicitation
dhcpcd[2515]: eth0: sendmsg: Network is unreachable
dhcpcd[2515]: eth0: broadcasting for a lease
dhcpcd[2515]: eth0: carrier lost
dhcpcd[2515]: eth0: carrier acquired
dhcpcd[2515]: eth0: sending IPv6 Router Solicitation
dhcpcd[2515]: eth0: sendmsg: Network is unreachable
dhcpcd[2515]: eth0: broadcasting for a lease
dhcpcd[2515]: eth0: carrier lost
dhcpcd[2515]: eth0: carrier acquired
dhcpcd[2515]: eth0: sending IPv6 Router Solicitation
dhcpcd[2515]: eth0: sendmsg: Network is unreachable
dhcpcd[2515]: eth0: broadcasting for a lease
And my ifconfig:
[root@arch-lap ~]# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 metric 1
ether 00:24:21:62:d5:d3 txqueuelen 1000 (Ethernet)
RX packets 1 bytes 60 (60.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 50 bytes 18400 (17.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 44 base 0xa000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 metric 1
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 0 (Local Loopback)
RX packets 616 bytes 48458 (47.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 616 bytes 48458 (47.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet 192.168.0.37 netmask 255.255.240.0 broadcast 192.168.15.255
ether 00:22:43:8f:76:9f txqueuelen 1000 (Ethernet)
RX packets 12278 bytes 2600043 (2.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1401 bytes 303438 (296.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Thanks in advance!
Offline
The "eth0: sending IPv6 Router Solicitation" message just means that it's also trying to discover ipv6 routers on the link; not that it's only using ipv6.
Would it be possible to try dhclient instead and see what you get as a results with that?
Burninate!
Offline