You are not logged in.

#1 2005-08-18 02:52:26

infernova
Member
Registered: 2004-04-09
Posts: 61

K3b crashes!

I've just updated the latest k3b version, and I haven't tested it yet.
Somewhat when the program closes, it'll crash with the message

"The application k3b crashed and caused the signal 6 (SIGABRT)".

This happens everytime. Is this a bug?

Offline

#2 2005-08-18 03:30:53

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: K3b crashes!

I have latest k3b in current (k3b 0.12.2-1) and I don't get that error. Are you using the one from the testing repo?

Offline

#3 2005-08-18 03:40:04

infernova
Member
Registered: 2004-04-09
Posts: 61

Re: K3b crashes!

I think it's from EXTRA repo, because i have testing and unstable commented out.

Offline

#4 2005-08-18 03:41:25

infernova
Member
Registered: 2004-04-09
Posts: 61

Re: K3b crashes!

Sorry, missed out this. My version is the same as yours, and I've just checked, it's the latest one.

Offline

#5 2005-08-18 04:07:39

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: K3b crashes!

Is the rest of your system up-to date?
Try starting k3b from a terminal.  It will printout more detailed error messages.

Offline

#6 2005-08-18 04:20:03

infernova
Member
Registered: 2004-04-09
Posts: 61

Re: K3b crashes!

I am not able to start k3b from terminal

it's like this

[root@BOOGY ~]# k3b &
[1] 8549
[root@BOOGY ~]# Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

kded: cannot connect to X server :0.0
kded: ERROR: KUniqueApplication: Registering failed!
kded: ERROR: Communication problem with kded, it probably crashed.
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

kdeinit: Can't connect to the X Server.
kdeinit: Might not terminate at end of session.
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified

k3b: cannot connect to X server :0.0
ERROR: KUniqueApplication: Registering failed!
ERROR: Communication problem with k3b, it probably crashed.

[1]+  Exit 255                k3b

Another thing is that when I run "K3b setup", and close the window, this error shows up

"The Application KDE Control Module (kcmshell) crashed and caused the signal 6 (SIGABRT)

Offline

#7 2005-08-18 04:23:19

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: K3b crashes!

Try running it as a user instead of as root.

Offline

#8 2005-08-18 05:54:27

infernova
Member
Registered: 2004-04-09
Posts: 61

Re: K3b crashes!

I warn you firsthand

Here goes nothing....

[herman@BOOGY ~]$ k3b &
[1] 8946
[herman@BOOGY ~]$ k3b: (K3bExternalBinManager) Cdrecord 2.1 features: gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 1 -1  seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: (K3bDevice::HalConnection) initializing HAL >= 0.5
k3b: (K3bDevice::HalConnection) unable to connect to DBUS.
k3b: /dev/sr0 resolved to /dev/scsi/host0/bus0/target0/lun0/cd
k3b: /dev/scsi/host0/bus0/target0/lun0/cd is block device (0)
k3b: /dev/scsi/host0/bus0/target0/lun0/cd seems to be cdrom
k3b: bus: 0, id: 0, lun: 0
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: init()
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: CD Mastering
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: CD Track At Once
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: CD-RW Media Write Support
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: DVD Read
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: DVD+R
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: DVD+RW
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: DVD-R/-RW Write
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd feature: Rigid Restricted Overwrite
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd unknown profile: 2
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: dataLen: 60
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: checking for TAO
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: checking for SAO
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: checking for SAO_R96P
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: checking for SAO_R96R
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: checking for RAW_R16
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: checking for RAW_R96P
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd: checking for RAW_R96R
k3b: (K3bDevice::Device) unknown dvd media type: 140
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd:  Number of supported write speeds via 2A: 4
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd : 4234 KB/s
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd : 2822 KB/s
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd : 1411 KB/s
k3b: (K3bDevice::Device) /dev/scsi/host0/bus0/target0/lun0/cd : 706 KB/s
k3b: (K3bDevice::DeviceManager) setting current write speed of device /dev/scsi/host0/bus0/target0/lun0/cd to 4234
k3b: /dev/scd0 resolved to /dev/scd0
k3b: (K3bDevice::Device) Error: could not open device /dev/scd0for reading
k3b: could not open device /dev/scd0 (Permission denied)
k3b: /dev/hdc resolved to /dev/ide/host0/bus1/target0/lun0/cd
k3b: /dev/ide/host0/bus1/target0/lun0/cd is block device (0)
k3b: /dev/ide/host0/bus1/target0/lun0/cd seems to be cdrom
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: init()
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd feature: CD Mastering
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd feature: CD Track At Once
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: dataLen: 60
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: checking for TAO
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: checking for SAO
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: checking for SAO_R96P
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: checking for SAO_R96R
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: checking for RAW_R16
k3b: (K3bDevice::ScsiCommand) failed:
k3b:                            command:    MODE SELECT (55)
k3b:                            errorcode:  38
k3b:                            sense key:  NO SENSE (2)
k3b:                            asc:        26
k3b:                            ascq:       0
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: checking for RAW_R96P
k3b: (K3bDevice::ScsiCommand) failed:
k3b:                            command:    MODE SELECT (55)
k3b:                            errorcode:  38
k3b:                            sense key:  NO SENSE (2)
k3b:                            asc:        26
k3b:                            ascq:       0
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: checking for RAW_R96R
k3b: (K3bDevice::ScsiCommand) failed:
k3b:                            command:    MODE SELECT (55)
k3b:                            errorcode:  38
k3b:                            sense key:  NO SENSE (2)
k3b:                            asc:        26
k3b:                            ascq:       0
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd:  Number of supported write speeds via 2A: -1
k3b: (K3bDevice::ScsiCommand) failed:
k3b:                            command:    GET PERFORMANCE (ac)
k3b:                            errorcode:  38
k3b:                            sense key:  NO SENSE (2)
k3b:                            asc:        20
k3b:                            ascq:       0
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: GET PERFORMANCE length det failed.
k3b: (K3bDevice::ScsiCommand) failed:
k3b:                            command:    MODE SENSE (5a)
k3b:                            errorcode:  38
k3b:                            sense key:  NOT READY (2)
k3b:                            asc:        24
k3b:                            ascq:       0
k3b: (K3bDevice::Device) /dev/ide/host0/bus1/target0/lun0/cd: MODE SENSE length det failed.
k3b: (K3bDevice::DeviceManager) setting current write speed of device /dev/ide/host0/bus1/target0/lun0/cd to 1411
k3b: /dev/hdb resolved to /dev/ide/host0/bus0/target1/lun0/cd
k3b: /dev/ide/host0/bus0/target1/lun0/cd is block device (64)
k3b: /dev/ide/host0/bus0/target1/lun0/cd seems to be cdrom
k3b: (K3bDevice::Device) /dev/ide/host0/bus0/target1/lun0/cd: init()
k3b: (K3bDevice::Device) /dev/ide/host0/bus0/target1/lun0/cd feature: DVD Read
k3b: (K3bDevice::ScsiCommand) failed:
k3b:                            command:    MODE SENSE (5a)
k3b:                            errorcode:  38
k3b:                            sense key:  NO SENSE (2)
k3b:                            asc:        24
k3b:                            ascq:       0
k3b: (K3bDevice::Device) /dev/ide/host0/bus0/target1/lun0/cd: MODE SENSE length det failed.
k3b: (K3bDevice::Device) /dev/ide/host0/bus0/target1/lun0/cd: modeSense 0x05 failed!
k3b: (K3bDevice::Device) /dev/ide/host0/bus0/target1/lun0/cd: Cannot check write modes.
k3b: (K3bDevice::ScsiCommand) failed:
k3b:                            command:    MODE SENSE (5a)
k3b:                            errorcode:  38
k3b:                            sense key:  NO SENSE (2)
k3b:                            asc:        24
k3b:                            ascq:       0
k3b: (K3bDevice::Device) /dev/ide/host0/bus0/target1/lun0/cd: MODE SENSE length det failed.
k3b: (K3bDevice::DeviceManager) Link: /dev/cdroms/cdrom0 -> /dev/ide/host0/bus0/target1/lun0/cd
k3b: (K3bDevice::DeviceManager) Link: /dev/cdroms/cdrom1 -> /dev/ide/host0/bus1/target0/lun0/cd
k3b: (K3bDevice::DeviceManager) Link: /dev/hdb -> /dev/ide/host0/bus0/target1/lun0/cd
k3b: (K3bDevice::DeviceManager) Link: /dev/hdc -> /dev/ide/host0/bus1/target0/lun0/cd
k3b: (K3bDevice::DeviceManager) Link: /dev/sr0 -> /dev/scsi/host0/bus0/target0/lun0/cd
k3b: (K3bDevice::DeviceManager) SCANNING FOR GENERIC DEVICES.
k3b: bus: 0, id: 0, lun: 0
k3b: Could not resolve /dev/sg1
k3b: (K3bDevice::Device) Error: could not open device /dev/sg1for reading
k3b: could not open device /dev/sg1 (No such file or directory)
k3b: Could not resolve /dev/sg2
k3b: (K3bDevice::Device) Error: could not open device /dev/sg2for reading
k3b: could not open device /dev/sg2 (No such file or directory)
k3b: Could not resolve /dev/sg3
k3b: (K3bDevice::Device) Error: could not open device /dev/sg3for reading
k3b: could not open device /dev/sg3 (No such file or directory)
k3b: Could not resolve /dev/sg4
k3b: (K3bDevice::Device) Error: could not open device /dev/sg4for reading
k3b: could not open device /dev/sg4 (No such file or directory)
k3b: Could not resolve /dev/sg5
k3b: (K3bDevice::Device) Error: could not open device /dev/sg5for reading
k3b: could not open device /dev/sg5 (No such file or directory)
k3b: Could not resolve /dev/sg6
k3b: (K3bDevice::Device) Error: could not open device /dev/sg6for reading
k3b: could not open device /dev/sg6 (No such file or directory)
k3b: Could not resolve /dev/sg7
k3b: (K3bDevice::Device) Error: could not open device /dev/sg7for reading
k3b: could not open device /dev/sg7 (No such file or directory)
k3b: Could not resolve /dev/sg8
k3b: (K3bDevice::Device) Error: could not open device /dev/sg8for reading
k3b: could not open device /dev/sg8 (No such file or directory)
k3b: Could not resolve /dev/sg9
k3b: (K3bDevice::Device) Error: could not open device /dev/sg9for reading
k3b: could not open device /dev/sg9 (No such file or directory)
k3b: Could not resolve /dev/sg10
k3b: (K3bDevice::Device) Error: could not open device /dev/sg10for reading
k3b: could not open device /dev/sg10 (No such file or directory)
k3b: Could not resolve /dev/sg11
k3b: (K3bDevice::Device) Error: could not open device /dev/sg11for reading
k3b: could not open device /dev/sg11 (No such file or directory)
k3b: Could not resolve /dev/sg12
k3b: (K3bDevice::Device) Error: could not open device /dev/sg12for reading
k3b: could not open device /dev/sg12 (No such file or directory)
k3b: Could not resolve /dev/sg13
k3b: (K3bDevice::Device) Error: could not open device /dev/sg13for reading
k3b: could not open device /dev/sg13 (No such file or directory)
k3b: Could not resolve /dev/sg14
k3b: (K3bDevice::Device) Error: could not open device /dev/sg14for reading
k3b: could not open device /dev/sg14 (No such file or directory)
k3b: Could not resolve /dev/sg15
k3b: (K3bDevice::Device) Error: could not open device /dev/sg15for reading
k3b: could not open device /dev/sg15 (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: tmpfs
k3b: Could not resolve tmpfs
k3b: (K3bDevice::Device) Error: could not open device tmpfsfor reading
k3b: could not open device tmpfs (No such file or directory)
k3b: Could not resolve tmpfs
k3b: tmpfs resolved to tmpfs
k3b: (K3bDevice::Device) Error: could not open device tmpfsfor reading
k3b: could not open device tmpfs (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: usbfs
k3b: Could not resolve usbfs
k3b: (K3bDevice::Device) Error: could not open device usbfsfor reading
k3b: could not open device usbfs (No such file or directory)
k3b: Could not resolve usbfs
k3b: usbfs resolved to usbfs
k3b: (K3bDevice::Device) Error: could not open device usbfsfor reading
k3b: could not open device usbfs (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdroms/cdrom1
k3b: (K3bDevice::DeviceManager) found device for /dev/cdroms/cdrom1: /dev/ide/host0/bus1/target0/lun0/cd
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdroms/cdrom0
k3b: (K3bDevice::DeviceManager) found device for /dev/cdroms/cdrom0: /dev/ide/host0/bus0/target1/lun0/cd
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdroms/cdrom2
k3b: (K3bDevice::Device) Error: could not open device /dev/cdroms/cdrom2for reading
k3b: could not open device /dev/cdroms/cdrom2 (Permission denied)
k3b: /dev/cdroms/cdrom2 resolved to /dev/scd0
k3b: (K3bDevice::Device) Error: could not open device /dev/scd0for reading
k3b: could not open device /dev/scd0 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/floppy/0
k3b: (K3bDevice::Device) Error: could not open device /dev/floppy/0for reading
k3b: could not open device /dev/floppy/0 (Permission denied)
k3b: /dev/floppy/0 resolved to /dev/floppy/0
k3b: (K3bDevice::Device) Error: could not open device /dev/floppy/0for reading
k3b: could not open device /dev/floppy/0 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/sda1
k3b: Could not resolve /dev/sda1
k3b: (K3bDevice::Device) Error: could not open device /dev/sda1for reading
k3b: could not open device /dev/sda1 (No such file or directory)
k3b: Could not resolve /dev/sda1
k3b: /dev/sda1 resolved to /dev/sda1
k3b: (K3bDevice::Device) Error: could not open device /dev/sda1for reading
k3b: could not open device /dev/sda1 (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/dics0/part1
k3b: Could not resolve /dev/discs/dics0/part1
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/dics0/part1for reading
k3b: could not open device /dev/discs/dics0/part1 (No such file or directory)
k3b: Could not resolve /dev/discs/dics0/part1
k3b: /dev/discs/dics0/part1 resolved to /dev/discs/dics0/part1
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/dics0/part1for reading
k3b: could not open device /dev/discs/dics0/part1 (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part3
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part3for reading
k3b: could not open device /dev/discs/disc0/part3 (Permission denied)
k3b: /dev/discs/disc0/part3 resolved to /dev/ide/host0/bus0/target0/lun0/part3
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part3for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part3 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part5
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part5for reading
k3b: could not open device /dev/discs/disc0/part5 (Permission denied)
k3b: /dev/discs/disc0/part5 resolved to /dev/ide/host0/bus0/target0/lun0/part5
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part5for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part5 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part2
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part2for reading
k3b: could not open device /dev/discs/disc0/part2 (Permission denied)
k3b: /dev/discs/disc0/part2 resolved to /dev/ide/host0/bus0/target0/lun0/part2
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part2for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part2 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part6
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part6for reading
k3b: could not open device /dev/discs/disc0/part6 (Permission denied)
k3b: /dev/discs/disc0/part6 resolved to /dev/ide/host0/bus0/target0/lun0/part6
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part6for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part6 (Permission denied)
k3b: /dev/scsi/host0/bus0/target0/lun0/cd resolved to /dev/scsi/host0/bus0/target0/lun0/cd
k3b: /dev/scsi/host0/bus0/target0/lun0/cd is block device (0)
k3b: /dev/scsi/host0/bus0/target0/lun0/cd seems to be cdrom
k3b: (K3bDevice::DeviceManager) dev /dev/scsi/host0/bus0/target0/lun0/cd already found
k3b: /dev/ide/host0/bus1/target0/lun0/cd resolved to /dev/ide/host0/bus1/target0/lun0/cd
k3b: /dev/ide/host0/bus1/target0/lun0/cd is block device (0)
k3b: /dev/ide/host0/bus1/target0/lun0/cd seems to be cdrom
k3b: (K3bDevice::DeviceManager) dev /dev/ide/host0/bus1/target0/lun0/cd already found
k3b: /dev/ide/host0/bus0/target1/lun0/cd resolved to /dev/ide/host0/bus0/target1/lun0/cd
k3b: /dev/ide/host0/bus0/target1/lun0/cd is block device (64)
k3b: /dev/ide/host0/bus0/target1/lun0/cd seems to be cdrom
k3b: (K3bDevice::DeviceManager) dev /dev/ide/host0/bus0/target1/lun0/cd already found
k3b: (K3bDevice::DeviceManager) found config entry for devicetype: IOMEGA DVDRW4224INQ-D
k3b: (K3bDevice::DeviceManager) found config entry for devicetype: MATSHITA UJDA330
k3b: (K3bDevice::DeviceManager) found config entry for devicetype: LG DVD-ROM DRN8080B
k3b: (K3bDevice::DeviceManager) scanning fstab: tmpfs
k3b: Could not resolve tmpfs
k3b: (K3bDevice::Device) Error: could not open device tmpfsfor reading
k3b: could not open device tmpfs (No such file or directory)
k3b: Could not resolve tmpfs
k3b: tmpfs resolved to tmpfs
k3b: (K3bDevice::Device) Error: could not open device tmpfsfor reading
k3b: could not open device tmpfs (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: usbfs
k3b: Could not resolve usbfs
k3b: (K3bDevice::Device) Error: could not open device usbfsfor reading
k3b: could not open device usbfs (No such file or directory)
k3b: Could not resolve usbfs
k3b: usbfs resolved to usbfs
k3b: (K3bDevice::Device) Error: could not open device usbfsfor reading
k3b: could not open device usbfs (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdroms/cdrom1
k3b: (K3bDevice::DeviceManager) found device for /dev/cdroms/cdrom1: /dev/ide/host0/bus1/target0/lun0/cd
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdroms/cdrom0
k3b: (K3bDevice::DeviceManager) found device for /dev/cdroms/cdrom0: /dev/ide/host0/bus0/target1/lun0/cd
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/cdroms/cdrom2
k3b: (K3bDevice::Device) Error: could not open device /dev/cdroms/cdrom2for reading
k3b: could not open device /dev/cdroms/cdrom2 (Permission denied)
k3b: /dev/cdroms/cdrom2 resolved to /dev/scd0
k3b: (K3bDevice::Device) Error: could not open device /dev/scd0for reading
k3b: could not open device /dev/scd0 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/floppy/0
k3b: (K3bDevice::Device) Error: could not open device /dev/floppy/0for reading
k3b: could not open device /dev/floppy/0 (Permission denied)
k3b: /dev/floppy/0 resolved to /dev/floppy/0
k3b: (K3bDevice::Device) Error: could not open device /dev/floppy/0for reading
k3b: could not open device /dev/floppy/0 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/sda1
k3b: Could not resolve /dev/sda1
k3b: (K3bDevice::Device) Error: could not open device /dev/sda1for reading
k3b: could not open device /dev/sda1 (No such file or directory)
k3b: Could not resolve /dev/sda1
k3b: /dev/sda1 resolved to /dev/sda1
k3b: (K3bDevice::Device) Error: could not open device /dev/sda1for reading
k3b: could not open device /dev/sda1 (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/dics0/part1
k3b: Could not resolve /dev/discs/dics0/part1
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/dics0/part1for reading
k3b: could not open device /dev/discs/dics0/part1 (No such file or directory)
k3b: Could not resolve /dev/discs/dics0/part1
k3b: /dev/discs/dics0/part1 resolved to /dev/discs/dics0/part1
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/dics0/part1for reading
k3b: could not open device /dev/discs/dics0/part1 (No such file or directory)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part3
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part3for reading
k3b: could not open device /dev/discs/disc0/part3 (Permission denied)
k3b: /dev/discs/disc0/part3 resolved to /dev/ide/host0/bus0/target0/lun0/part3
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part3for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part3 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part5
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part5for reading
k3b: could not open device /dev/discs/disc0/part5 (Permission denied)
k3b: /dev/discs/disc0/part5 resolved to /dev/ide/host0/bus0/target0/lun0/part5
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part5for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part5 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part2
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part2for reading
k3b: could not open device /dev/discs/disc0/part2 (Permission denied)
k3b: /dev/discs/disc0/part2 resolved to /dev/ide/host0/bus0/target0/lun0/part2
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part2for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part2 (Permission denied)
k3b: (K3bDevice::DeviceManager) scanning fstab: /dev/discs/disc0/part6
k3b: (K3bDevice::Device) Error: could not open device /dev/discs/disc0/part6for reading
k3b: could not open device /dev/discs/disc0/part6 (Permission denied)
k3b: /dev/discs/disc0/part6 resolved to /dev/ide/host0/bus0/target0/lun0/part6
k3b: (K3bDevice::Device) Error: could not open device /dev/ide/host0/bus0/target0/lun0/part6for reading
k3b: could not open device /dev/ide/host0/bus0/target0/lun0/part6 (Permission denied)
k3b: (K3bExternalBinManager) Cdrecord 2.1 features: gracetime, overburn, cdtext, clone, tao, cuefile, xamix, plain-atapi, hacked-atapi
k3b: (K3bExternalBinManager) 2 1 -1  seems to be cdrecord version >= 1.11a02, using burnfree instead of burnproof
k3b: (K3bExternalBinManager) seems to be cdrecord version >= 1.11a31, support for Just Link via burnfree driveroption
k3b: Devices:
k3b: ------------------------------
k3b: Blockdevice:    /dev/scsi/host0/bus0/target0/lun0/cd
k3b: Generic device: /dev/scsi/host0/bus0/target0/lun0/generic
k3b: Vendor:         IOMEGA
k3b: Description:    DVDRW4224INQ-D
k3b: Version:        A105
k3b: MountDevice:
k3b: Mountpoint:
k3b: Write speed:    4234
k3b: Profiles:       DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; CD-ROM; CD-R; CD-RW
k3b: Devicetype:     CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW
k3b: Writing modes:  SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite
k3b: Reader aliases: /dev/scsi/host0/bus0/target0/lun0/cd, /dev/sr0
k3b: ------------------------------
k3b: Blockdevice:    /dev/ide/host0/bus1/target0/lun0/cd
k3b: Generic device:
k3b: Vendor:         MATSHITA
k3b: Description:    UJDA330
k3b: Version:        1.50
k3b: MountDevice:    /dev/cdroms/cdrom1
k3b: Mountpoint:     /mnt/cd
k3b: Write speed:    1411
k3b: Profiles:       CD-ROM; CD-R; CD-RW
k3b: Devicetype:     CD-R; CD-RW; CD-ROM
k3b: Writing modes:  SAO; TAO; SAO/R96P; SAO/R96R
k3b: Reader aliases: /dev/ide/host0/bus1/target0/lun0/cd, /dev/cdroms/cdrom1, /dev/hdc
k3b: ------------------------------
k3b: Blockdevice:    /dev/ide/host0/bus0/target1/lun0/cd
k3b: Generic device:
k3b: Vendor:         LG
k3b: Description:    DVD-ROM DRN8080B
k3b: Version:        2.01
k3b: MountDevice:    /dev/cdroms/cdrom0
k3b: Mountpoint:     /mnt/dvd
k3b: Write speed:    0
k3b: Profiles:       DVD-ROM; CD-ROM
k3b: Devicetype:     CD-ROM; DVD-ROM
k3b: Writing modes:  None
k3b: Reader aliases: /dev/ide/host0/bus0/target1/lun0/cd, /dev/cdroms/cdrom0, /dev/hdb
k3b: ------------------------------
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done
k3b: (K3bFileTreeView::addCdDeviceBranches)
k3b: (K3bFileTreeView::addCdDeviceBranches) done
k3b: linux kernel version: 2.6.12-ARCH
k3b: linux kernel version: 2.6.12-ARCH
k3b: linux kernel version: 2.6.12-ARCH
k3b: linux kernel version: 2.6.12-ARCH
k3b: (K3bCore) System problems:
k3b:           - none -
k3b: (K3b::cutToWidth) not able to cut text to 28!
8947: arguments to dbus_connection_send_with_reply_and_block() were incorrect, assertion "connection != NULL" failed in file dbus-connection.c line 2761.
This is normally a bug in some application using the D-BUS library.
8947: assertion failed "(error) == NULL || dbus_error_is_set ((error))" file "dbus-bus.c" line 854 function send_no_return_values
KCrash: Application 'k3b' crashing...

Any ideas?

Sorry for the long output, but that's what I get when running from terminal

Offline

#9 2005-08-18 05:57:22

infernova
Member
Registered: 2004-04-09
Posts: 61

Re: K3b crashes!

another information, my k3b takes roughly a minute to load into the main GUI, which is so unusual. I've used K3B before, and it only took few seconds to load.

I know something is wrong, but couldn't really find anything based on the logs. Your help is appreciated

Offline

#10 2005-08-18 06:20:03

Snowman
Developer/Forum Fellow
From: Montreal, Canada
Registered: 2004-08-20
Posts: 5,212

Re: K3b crashes!

Try starting the dbus daemon as root:
/etc/rc.d/dbus start
then as user:
k3b

If that works, put dbus in the DAEMONS array of rc.conf

Offline

#11 2005-08-18 08:38:08

infernova
Member
Registered: 2004-04-09
Posts: 61

Re: K3b crashes!

you're a piece of magic!, looking at the logs, I should have known it mentioned something about DBUS, then again I don't know what services dbus is for.

No more crashing....but I still have tons of problems. care to lend your magic wand again?

Offline

#12 2005-08-18 08:40:48

infernova
Member
Registered: 2004-04-09
Posts: 61

Re: K3b crashes!

just curious

here's my daemon entry within rc.conf now

DAEMONS=(syslog-ng hotplug !pcmcia network dbus netfs crond scim samba cupsd)

I happened to came across one issue (can't remember) that putting these services has to be in order or else something funny might pop. Is that true?

Offline

#13 2005-08-18 11:11:50

T-Dawg
Forum Fellow
From: Wilmington, NC
Registered: 2005-01-29
Posts: 2,734

Re: K3b crashes!

It looks like you've got everything right. If for example you were additionaly running hal and ivman, you would have to put  in as "dbus hal ivman" because the next daemon requires the preceding to be loaded before starting.

Offline

#14 2005-08-18 15:43:23

scarecrow
Member
From: Greece
Registered: 2004-11-18
Posts: 714

Re: K3b crashes!

DAEMONS=(syslog-ng hotplug !pcmcia network dbus netfs crond scim samba cupsd)

HAL is not there, so the rest are self-explicable...  wink
The current versions of K3B rely on hal to detect optical drives.


Microshaft delenda est

Offline

Board footer

Powered by FluxBB