You are not logged in.
Hello.
I've got a Packard Bell netbook, and because of some application, I'd need to increase my screen resolution, which is currently 1024x600, to values such as 1024x768. I don't know whether it's possible, neither if it depends only on hardware, even though I've heard something about some softwares like newrez (but it seems to be a Nautilus script, while I use KDE).
Thus, anyone could suggest me on how to proceed?
Offline
Have you checked xrandr? If that resolution is an option there, then just select it with xrandr. If it's not an option in xrandr, then you'd need a different video driver - and this is assuming your hardware even supports that resolution.
Useful information to proceed would be the output of `xrandr` and `lspci | grep -i vga` as well as what video driver you are currently using (ie `pacman -Qs xf86-video`)
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
You can probably have a desktop bigger than your physical screen size - it just scrolls when the pointer hits an edge.
Offline
Yes, xrandr says that the maximum resolution is 4096x4096, but when I tried to create and add a new mode, then it printed some errors.
Here's some steps:
[riccardo@server1 ~]$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 600, maximum 4096 x 4096
LVDS1 connected 1024x600+0+0 (normal left inverted right x axis y axis) 222mm x 125mm
1024x600 60.0*+
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
[riccardo@server1 ~]$ cvt 1024 768
# 1024x768 59.92 Hz (CVT 0.79M3) hsync: 47.82 kHz; pclk: 63.50 MHz
Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
[riccardo@server1 ~]$ xrandr --newmode "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
[riccardo@server1 ~]$ xrandr --addmode LVDS1 1024x768_60.00
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 25
Current serial number in output stream: 26
[riccardo@server1 ~]$ xrandr --output LVDS1 --mode 1024x768_60.00
xrandr: cannot find mode 1024x768_60.00At this point I started getting confused, so I typed again
[riccardo@server1 ~]$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 600, maximum 4096 x 4096
LVDS1 connected 1024x600+0+0 (normal left inverted right x axis y axis) 222mm x 125mm
1024x600 60.0*+
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
1024x768_60.00 (0x173) 63.5MHz
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock 47.8KHz
v: height 768 start 771 end 775 total 798 clock 59.9HzWhat does that mean? Did I do anything wrong?
Other useful information:
[riccardo@server1 ~]$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
[riccardo@server1 ~]$ pacman -Qs xf86-video
local/xf86-video-fbdev 0.4.2-5 (xorg-drivers xorg)
X.org framebuffer video driver
local/xf86-video-intel 2.17.0-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-vesa 2.3.0-7 (xorg-drivers xorg)
X.org vesa video driverOffline