You are not logged in.
Pages: 1
I am playing with ipv6. I am on ipv4 only network and I have a plublically routable ipv4 adress:
[root@pcxxxxxxx ~/downloads]# ifconfig eth0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet 83.101.52.79 netmask 255.255.255.0 broadcast 83.101.52.255
inet6 fe80::203:dff:fe5a:917a prefixlen 64 scopeid 0x20<link>
ether 00:03:0d:5a:91:7a txqueuelen 1000 (Ethernet)
RX packets 1501 bytes 765571 (747.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1916 bytes 237568 (232.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 16 base 0x8000
I am trying to set up 6to4 with the instruction I found here: http://www.wtfm.org/ip6to4. The provided script apparently works (after having corrected the line getting the ipv4 address from ifconfig; whose syntax has apparently slightly changed). But when I try to access a ipv6 only site such as ipv6.google.com , the connection always time out. I use 8.8.8.8 as DNS server and I am able to ping the 6 to 4 relay (192.88.99.1). As anyone succeed to set up such a config under arch? I have no idea what I do wrong
Last edited by olive (2012-06-05 21:55:17)
Offline
Pages: 1