You are not logged in.
- Topics: Active | Unanswered
#26 2012-06-11 23:30:37
- Cerbereus
- Member
- Registered: 2008-10-06
- Posts: 41
Re: Shutdown and reboot not working
Hello Insixible well after reading here i will put my dmesg also my xorg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.0 20120505 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012
[ 0.000000] Command line: root=/dev/sdb1 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe80000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe80000 - 00000000cfe98000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfec0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/M4A89GTD-PRO/USB3, BIOS 3027 10/31/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe80000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe80000 page 4k
[ 0.000000] kernel direct mapping tables up to cfe80000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ cfe7e000-cfe80000
[ 0.000000] RAMDISK: 37c5e000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbb30 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cfe80100 00054 (v01 103111 XSDT1147 20111031 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe80290 000F4 (v03 103111 FACP1147 20111031 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cfe80460 0E87F (v01 A1608 A1608000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfe98000 00040
[ 0.000000] ACPI: APIC 00000000cfe80390 0008C (v01 103111 APIC1147 20111031 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe80420 0003C (v01 103111 OEMMCFG 20111031 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfe98040 00072 (v01 103111 OEMB1147 20111031 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cfe8f8b0 00038 (v01 103111 OEMHPET 20111031 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cfe8f8f0 008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217a00000-ffff88021f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfe80
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2031119
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831168 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1161216 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe80000 - 00000000cfe98000
[ 0.000000] PM: Registered nosave memory: 00000000cfe98000 - 00000000cfec0000
[ 0.000000] PM: Registered nosave memory: 00000000cfec0000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s82176 r8192 d24320 u262144
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1996298
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sdb1 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 7850196k/8912896k available (4496k kernel code, 788420k absent, 274280k reserved, 4326k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3210.737 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6424.03 BogoMIPS (lpj=10702456)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.003360] Security Framework initialized
[ 0.003363] AppArmor: AppArmor disabled by boot time parameter
[ 0.007120] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009127] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010039] Mount-cache hash table entries: 256
[ 0.010149] Initializing cgroup subsys cpuacct
[ 0.010151] Initializing cgroup subsys memory
[ 0.010159] Initializing cgroup subsys devices
[ 0.010160] Initializing cgroup subsys freezer
[ 0.010162] Initializing cgroup subsys net_cls
[ 0.010163] Initializing cgroup subsys blkio
[ 0.010185] tseg: 0000000000
[ 0.010195] CPU: Physical Processor ID: 0
[ 0.010196] CPU: Processor Core ID: 0
[ 0.010198] mce: CPU supports 6 MCE banks
[ 0.010760] ACPI: Core revision 20120111
[ 0.016671] ftrace: allocating 17489 entries in 69 pages
[ 0.023666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059361] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.059996] Performance Events: AMD PMU driver.
[ 0.059996] ... version: 0
[ 0.059996] ... bit width: 48
[ 0.059996] ... generic registers: 4
[ 0.059996] ... value mask: 0000ffffffffffff
[ 0.059996] ... max period: 00007fffffffffff
[ 0.059996] ... fixed-purpose events: 0
[ 0.059996] ... event mask: 000000000000000f
[ 0.076703] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.103348] Booting Node 0, Processors #1
[ 0.103350] smpboot cpu 1: start_ip = 9a000
[ 0.116685] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.136694] #2
[ 0.136696] smpboot cpu 2: start_ip = 9a000
[ 0.150013] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.170018] #3
[ 0.170019] smpboot cpu 3: start_ip = 9a000
[ 0.183354] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.190003] Brought up 4 CPUs
[ 0.190005] Total of 4 processors activated (25696.14 BogoMIPS).
[ 0.193412] devtmpfs: initialized
[ 0.195296] PM: Registering ACPI NVS region at cfe98000 (163840 bytes)
[ 0.197127] NET: Registered protocol family 16
[ 0.197201] node 0 link 0: io port [1000, ffffff]
[ 0.197203] TOM: 00000000d0000000 aka 3328M
[ 0.197205] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.197207] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.197210] node 0 link 0: mmio [f0000000, fe3fffff]
[ 0.197211] node 0 link 0: mmio [fe400000, fe5fffff]
[ 0.197213] node 0 link 0: mmio [fe600000, febfffff]
[ 0.197215] node 0 link 0: mmio [fec00000, fffeffff]
[ 0.197216] node 0 link 0: mmio [ffff0000, ffffffff]
[ 0.197218] TOM2: 0000000230000000 aka 8960M
[ 0.197219] bus: [00, 1f] on node 0 link 0
[ 0.197221] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.197222] bus: 00 index 1 [mem 0xd0000000-0xdfffffff]
[ 0.197223] bus: 00 index 2 [mem 0xf0000000-0xffffffff]
[ 0.197225] bus: 00 index 3 [mem 0x230000000-0xfcffffffff]
[ 0.197325] ACPI: bus type pci registered
[ 0.197371] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.197373] PCI: not using MMCONFIG
[ 0.197374] PCI: Using configuration type 1 for base access
[ 0.197375] PCI: Using configuration type 1 for extended access
[ 0.197748] bio: create slab <bio-0> at 0
[ 0.197748] ACPI: Added _OSI(Module Device)
[ 0.197748] ACPI: Added _OSI(Processor Device)
[ 0.197748] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.197748] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.197748] ACPI: EC: Look up EC in DSDT
[ 0.198526] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.290410] ACPI: Interpreter enabled
[ 0.290415] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.290430] ACPI: Using IOAPIC for interrupt routing
[ 0.290445] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.291528] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.311699] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.311805] ACPI: No dock devices found.
[ 0.311808] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.311943] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.312035] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.312036] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.312038] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.312040] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.312041] pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
[ 0.312043] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.312067] PCI host bridge to bus 0000:00
[ 0.312069] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.312071] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.312072] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.312073] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.312075] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
[ 0.312076] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.312086] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 0.312126] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[ 0.312160] pci 0000:00:09.0: [1022:9608] type 1 class 0x000604
[ 0.312187] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.312199] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 0.312226] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.312246] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.312260] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 0.312267] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 0.312274] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 0.312281] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 0.312288] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 0.312295] pci 0000:00:11.0: reg 24: [mem 0xfe3ffc00-0xfe3fffff]
[ 0.312309] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.312344] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.312354] pci 0000:00:12.0: reg 10: [mem 0xfe3fe000-0xfe3fefff]
[ 0.312406] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.312419] pci 0000:00:12.2: reg 10: [mem 0xfe3ff800-0xfe3ff8ff]
[ 0.312478] pci 0000:00:12.2: supports D1 D2
[ 0.312480] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.312496] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.312506] pci 0000:00:13.0: reg 10: [mem 0xfe3fd000-0xfe3fdfff]
[ 0.313362] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.313375] pci 0000:00:13.2: reg 10: [mem 0xfe3ff400-0xfe3ff4ff]
[ 0.313434] pci 0000:00:13.2: supports D1 D2
[ 0.313435] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.313452] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.313504] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.313514] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.313521] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.313528] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.313535] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.313542] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.313569] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.313584] pci 0000:00:14.2: reg 10: [mem 0xfe3f8000-0xfe3fbfff 64bit]
[ 0.313631] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.313642] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.313697] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.313727] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.313737] pci 0000:00:14.5: reg 10: [mem 0xfe3fc000-0xfe3fcfff]
[ 0.313788] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.313841] pci 0000:00:15.0: supports D1 D2
[ 0.313862] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.313871] pci 0000:00:16.0: reg 10: [mem 0xfe3f7000-0xfe3f7fff]
[ 0.313922] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.313936] pci 0000:00:16.2: reg 10: [mem 0xfe3ff000-0xfe3ff0ff]
[ 0.313995] pci 0000:00:16.2: supports D1 D2
[ 0.313996] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.314012] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.314024] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.314034] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.314044] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.314056] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.314089] pci 0000:01:05.0: [1002:9714] type 0 class 0x000300
[ 0.314096] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.314099] pci 0000:01:05.0: reg 14: [io 0xb000-0xb0ff]
[ 0.314103] pci 0000:01:05.0: reg 18: [mem 0xfe5f0000-0xfe5fffff]
[ 0.314111] pci 0000:01:05.0: reg 24: [mem 0xfe400000-0xfe4fffff]
[ 0.314125] pci 0000:01:05.0: supports D1 D2
[ 0.314152] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.314155] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.314157] pci 0000:00:01.0: bridge window [mem 0xfe400000-0xfe5fffff]
[ 0.314160] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.314192] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 0.314205] pci 0000:02:00.0: reg 10: [mem 0xfe6fe000-0xfe6fffff 64bit]
[ 0.314271] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.320003] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.320008] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.320043] pci 0000:03:00.0: [197b:2361] type 0 class 0x000101
[ 0.320106] pci 0000:03:00.0: reg 24: [mem 0xfe7fe000-0xfe7fffff]
[ 0.320153] pci 0000:03:00.0: PME# supported from D3hot
[ 0.320177] pci 0000:03:00.1: [197b:2361] type 0 class 0x000101
[ 0.320195] pci 0000:03:00.1: reg 10: [io 0xcc00-0xcc07]
[ 0.320204] pci 0000:03:00.1: reg 14: [io 0xc880-0xc883]
[ 0.320214] pci 0000:03:00.1: reg 18: [io 0xc800-0xc807]
[ 0.320224] pci 0000:03:00.1: reg 1c: [io 0xc480-0xc483]
[ 0.320233] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 0.320292] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.320301] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.320304] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.320306] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.320367] pci 0000:04:07.0: [1106:3044] type 0 class 0x000c00
[ 0.320385] pci 0000:04:07.0: reg 10: [mem 0xfe8ff800-0xfe8fffff]
[ 0.320396] pci 0000:04:07.0: reg 14: [io 0xdc00-0xdc7f]
[ 0.320468] pci 0000:04:07.0: supports D2
[ 0.320470] pci 0000:04:07.0: PME# supported from D2 D3hot D3cold
[ 0.320507] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.320510] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.320513] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.320516] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.320518] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.320519] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.320521] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.320523] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
[ 0.320524] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.320574] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[ 0.320589] pci 0000:05:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.320614] pci 0000:05:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.320630] pci 0000:05:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.320640] pci 0000:05:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.320697] pci 0000:05:00.0: supports D1 D2
[ 0.320698] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.326672] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.326677] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.326680] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.326684] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.326699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.326826] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.326853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.326869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.326897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.326937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.327015] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.327105] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.330429] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
[ 0.330468] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 14 15)
[ 0.330507] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 14 15)
[ 0.330546] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 14 15)
[ 0.330576] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.330599] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.330622] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 14 15)
[ 0.330644] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
[ 0.330686] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.330686] vgaarb: loaded
[ 0.330686] vgaarb: bridge control possible 0000:01:05.0
[ 0.330686] PCI: Using ACPI for IRQ routing
[ 0.336885] PCI: pci_cache_line_size set to 64 bytes
[ 0.336949] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.336951] reserve RAM buffer: 00000000cfe80000 - 00000000cfffffff
[ 0.337019] NetLabel: Initializing
[ 0.337020] NetLabel: domain hash size = 128
[ 0.337021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.337029] NetLabel: unlabeled traffic allowed by default
[ 0.337035] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.337038] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.339062] Switching to clocksource hpet
[ 0.344105] pnp: PnP ACPI init
[ 0.344115] ACPI: bus type pnp registered
[ 0.344182] pnp 00:00: [bus 00-ff]
[ 0.344184] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.344186] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.344187] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.344189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.344190] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.344192] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 0.344193] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.344231] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.344282] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.344284] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.344319] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.344734] pnp 00:02: [dma 4]
[ 0.344736] pnp 00:02: [io 0x0000-0x000f]
[ 0.344737] pnp 00:02: [io 0x0081-0x0083]
[ 0.344738] pnp 00:02: [io 0x0087]
[ 0.344741] pnp 00:02: [io 0x0089-0x008b]
[ 0.344742] pnp 00:02: [io 0x008f]
[ 0.344743] pnp 00:02: [io 0x00c0-0x00df]
[ 0.344767] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.344773] pnp 00:03: [io 0x0070-0x0071]
[ 0.344802] pnp 00:03: [irq 8]
[ 0.344824] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.344828] pnp 00:04: [io 0x0061]
[ 0.344850] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.344855] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.344859] pnp 00:05: [irq 13]
[ 0.344880] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.345213] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.345216] pnp 00:06: [irq 4]
[ 0.345218] pnp 00:06: [dma 0 disabled]
[ 0.345280] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.345302] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.345325] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.345370] pnp 00:08: [io 0x0060]
[ 0.345371] pnp 00:08: [io 0x0064]
[ 0.345374] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.345375] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.345415] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.345417] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.345419] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.345518] pnp 00:09: [io 0x0010-0x001f]
[ 0.345519] pnp 00:09: [io 0x0022-0x003f]
[ 0.345520] pnp 00:09: [io 0x0062-0x0063]
[ 0.345522] pnp 00:09: [io 0x0065-0x006f]
[ 0.345523] pnp 00:09: [io 0x0072-0x007f]
[ 0.345524] pnp 00:09: [io 0x0080]
[ 0.345525] pnp 00:09: [io 0x0084-0x0086]
[ 0.345526] pnp 00:09: [io 0x0088]
[ 0.345527] pnp 00:09: [io 0x008c-0x008e]
[ 0.345528] pnp 00:09: [io 0x0090-0x009f]
[ 0.345529] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.345531] pnp 00:09: [io 0x00b1]
[ 0.345532] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.345533] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.345534] pnp 00:09: [io 0x040b]
[ 0.345535] pnp 00:09: [io 0x04d6]
[ 0.345536] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.345537] pnp 00:09: [io 0x0c14]
[ 0.345538] pnp 00:09: [io 0x0c50-0x0c51]
[ 0.345540] pnp 00:09: [io 0x0c52]
[ 0.345541] pnp 00:09: [io 0x0c6c]
[ 0.345542] pnp 00:09: [io 0x0c6f]
[ 0.345543] pnp 00:09: [io 0x0cd0-0x0cd1]
[ 0.345544] pnp 00:09: [io 0x0cd2-0x0cd3]
[ 0.345545] pnp 00:09: [io 0x0cd4-0x0cd5]
[ 0.345546] pnp 00:09: [io 0x0cd6-0x0cd7]
[ 0.345547] pnp 00:09: [io 0x0cd8-0x0cdf]
[ 0.345548] pnp 00:09: [io 0x0800-0x089f]
[ 0.345550] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.345551] pnp 00:09: [io 0x0b00-0x0b1f]
[ 0.345552] pnp 00:09: [io 0x0b20-0x0b3f]
[ 0.345553] pnp 00:09: [io 0x0900-0x090f]
[ 0.345555] pnp 00:09: [io 0x0910-0x091f]
[ 0.345556] pnp 00:09: [io 0xfe00-0xfefe]
[ 0.345557] pnp 00:09: [io 0x0060]
[ 0.345558] pnp 00:09: [io 0x0064]
[ 0.345559] pnp 00:09: [mem 0xcff00000-0xcfffffff]
[ 0.345560] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 0.345562] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 0.345563] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 0.345565] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.345641] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.345643] system 00:09: [io 0x040b] has been reserved
[ 0.345645] system 00:09: [io 0x04d6] has been reserved
[ 0.345646] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.345648] system 00:09: [io 0x0c14] has been reserved
[ 0.345649] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.345651] system 00:09: [io 0x0c52] has been reserved
[ 0.345652] system 00:09: [io 0x0c6c] has been reserved
[ 0.345654] system 00:09: [io 0x0c6f] has been reserved
[ 0.345655] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.345657] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.345659] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.345660] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.345662] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.345664] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.345665] system 00:09: [io 0x0b00-0x0b1f] has been reserved
[ 0.345667] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.345668] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.345670] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.345672] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.345674] system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
[ 0.345676] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.345677] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.345679] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 0.345681] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.345794] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.345795] pnp 00:0a: [io 0x0230-0x023f]
[ 0.345796] pnp 00:0a: [io 0x0290-0x029f]
[ 0.345798] pnp 00:0a: [io 0x0f40-0x0f4f]
[ 0.345799] pnp 00:0a: [io 0x0a30-0x0a3f]
[ 0.345836] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 0.345838] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 0.345839] system 00:0a: [io 0x0f40-0x0f4f] has been reserved
[ 0.345841] system 00:0a: [io 0x0a30-0x0a3f] has been reserved
[ 0.345843] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.345863] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.345899] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.345901] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.345960] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.345961] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.345963] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.345964] pnp 00:0c: [mem 0x00100000-0xcfefffff]
[ 0.345965] pnp 00:0c: [mem 0xfec00000-0xffffffff]
[ 0.346002] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.346004] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.346006] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.346008] system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
[ 0.346009] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.346011] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.346071] pnp: PnP ACPI: found 13 devices
[ 0.346072] ACPI: ACPI bus type pnp unregistered
[ 0.352709] PCI: max bus depth: 1 pci_try_num: 2
[ 0.352730] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.352732] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.352734] pci 0000:00:01.0: bridge window [mem 0xfe400000-0xfe5fffff]
[ 0.352736] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.352739] pci 0000:00:09.0: PCI bridge to [bus 02-02]
[ 0.352741] pci 0000:00:09.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.352745] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 0.352746] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 0.352749] pci 0000:00:0a.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.352752] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 0.352754] pci 0000:00:14.4: bridge window [io 0xd000-0xdfff]
[ 0.352758] pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.352764] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 0.352766] pci 0000:00:15.0: bridge window [io 0xe000-0xefff]
[ 0.352769] pci 0000:00:15.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.352772] pci 0000:00:15.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.352802] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.352803] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.352805] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.352806] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.352808] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.352809] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.352811] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.352812] pci_bus 0000:01: resource 1 [mem 0xfe400000-0xfe5fffff]
[ 0.352814] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.352816] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.352817] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.352819] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.352820] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.352822] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.352823] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.352825] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.352826] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.352828] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.352829] pci_bus 0000:04: resource 8 [mem 0xcff00000-0xdfffffff]
[ 0.352831] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.352832] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.352834] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.352835] pci_bus 0000:05: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.352862] NET: Registered protocol family 2
[ 0.353026] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.354075] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.355961] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.356190] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.356191] TCP reno registered
[ 0.356202] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.356246] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.356340] NET: Registered protocol family 1
[ 0.356348] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.400158] pci 0000:01:05.0: Boot video device
[ 1.400193] PCI: CLS 64 bytes, default 64
[ 1.400232] Unpacking initramfs...
[ 1.454672] Freeing initrd memory: 3656k freed
[ 1.456938] PCI-DMA: Disabling AGP.
[ 1.457004] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.457005] PCI-DMA: using GART IOMMU.
[ 1.457007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.460224] IBS: LVT offset 1 assigned
[ 1.460239] perf: AMD IBS detected (0x0000001f)
[ 1.460370] audit: initializing netlink socket (disabled)
[ 1.460382] type=2000 audit(1339460328.459:1): initialized
[ 1.460989] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.462952] VFS: Disk quotas dquot_6.5.2
[ 1.462991] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.463056] msgmni has been set to 15468
[ 1.463294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.463349] io scheduler noop registered
[ 1.463351] io scheduler deadline registered
[ 1.463416] io scheduler cfq registered (default)
[ 1.463689] pcieport 0000:00:09.0: irq 40 for MSI/MSI-X
[ 1.463847] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 1.464003] pcieport 0000:00:15.0: irq 42 for MSI/MSI-X
[ 1.464085] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 1.464088] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.464091] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[ 1.464104] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[ 1.464106] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 1.464107] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 1.464110] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[ 1.464122] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 1.464124] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.464126] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 1.464219] GHES: HEST is not enabled!
[ 1.464306] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.484881] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.505702] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.505878] Linux agpgart interface v0.103
[ 1.505919] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.506394] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.506409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.506504] mousedev: PS/2 mouse device common for all mice
[ 1.506532] rtc_cmos 00:03: RTC can wake from S4
[ 1.506610] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.506629] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.506636] cpuidle: using governor ladder
[ 1.506638] cpuidle: using governor menu
[ 1.506776] TCP cubic registered
[ 1.506855] NET: Registered protocol family 10
[ 1.507158] NET: Registered protocol family 17
[ 1.507161] Registering the dns_resolver key type
[ 1.507305] PM: Hibernation image not present or could not be loaded.
[ 1.507310] registered taskstats version 1
[ 1.508009] rtc_cmos 00:03: setting system clock to 2012-06-12 00:18:49 UTC (1339460329)
[ 1.508031] Initializing network drop monitor service
[ 1.508820] Freeing unused kernel memory: 732k freed
[ 1.508947] Write protecting the kernel read-only data: 8192k
[ 1.512887] Freeing unused kernel memory: 1628k freed
[ 1.514763] Freeing unused kernel memory: 656k freed
[ 1.521227] udevd[79]: starting version 185
[ 1.523045] [drm] Initialized drm 1.1.0 20060810
[ 1.526478] [drm] radeon defaulting to kernel modesetting.
[ 1.526480] [drm] radeon kernel modesetting enabled.
[ 1.526658] radeon 0000:01:05.0: setting latency timer to 64
[ 1.526815] [drm] initializing kernel modesetting (RS880 0x1002:0x9714 0x1043:0x8454).
[ 1.526840] [drm] register mmio base: 0xFE5F0000
[ 1.526842] [drm] register mmio size: 65536
[ 1.527370] ATOM BIOS: B43106_DVI
[ 1.527383] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used)
[ 1.527385] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 1.531666] [drm] Detected VRAM RAM=368M, BAR=256M
[ 1.531669] [drm] RAM width 32bits DDR
[ 1.531742] [TTM] Zone kernel: Available graphics memory: 3961410 kiB.
[ 1.531744] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 1.531745] [TTM] Initializing pool allocator.
[ 1.531750] [TTM] Initializing DMA pool allocator.
[ 1.531772] [drm] radeon: 368M of VRAM memory ready
[ 1.531774] [drm] radeon: 512M of GTT memory ready.
[ 1.531790] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.531791] [drm] Driver supports precise vblank timestamp query.
[ 1.531847] [drm] radeon: irq initialized.
[ 1.531851] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.532359] [drm] radeon: ib pool ready.
[ 1.532431] [drm] Loading RS780 Microcode
[ 1.537088] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 1.537147] radeon 0000:01:05.0: WB enabled
[ 1.537149] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff8802124e7c00
[ 1.569241] [drm] ring test on 0 succeeded in 1 usecs
[ 1.569318] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.569586] [drm] Radeon Display Connectors
[ 1.569587] [drm] Connector 0:
[ 1.569588] [drm] VGA
[ 1.569590] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 1.569591] [drm] Encoders:
[ 1.569593] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.569594] [drm] Connector 1:
[ 1.569595] [drm] DVI-D
[ 1.569596] [drm] HPD3
[ 1.569597] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 1.569599] [drm] Encoders:
[ 1.569600] [drm] DFP1: INTERNAL_KLDSCP_LVTMA
[ 1.569633] [drm] radeon: power management initialized
[ 1.655361] [drm] fb mappable at 0xD0142000
[ 1.655362] [drm] vram apper at 0xD0000000
[ 1.655363] [drm] size 8294400
[ 1.655364] [drm] fb depth is 24
[ 1.655365] [drm] pitch is 7680
[ 1.655494] fbcon: radeondrmfb (fb0) is primary device
[ 1.684425] Console: switching to colour frame buffer device 240x67
[ 1.701863] fb0: radeondrmfb frame buffer device
[ 1.701864] drm: registered panic notifier
[ 1.701868] [drm] Initialized radeon 2.13.0 20080528 for 0000:01:05.0 on minor 0
[ 1.725314] usbcore: registered new interface driver usbfs
[ 1.725332] usbcore: registered new interface driver hub
[ 1.726133] usbcore: registered new device driver usb
[ 1.726401] SCSI subsystem initialized
[ 1.727935] libata version 3.00 loaded.
[ 1.728580] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.728604] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.728665] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.728727] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfe6fe000
[ 1.728772] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.728777] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.728782] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1.728787] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 1.728791] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 1.728899] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.728948] xHCI xhci_add_endpoint called for root hub
[ 1.728950] xHCI xhci_check_bandwidth called for root hub
[ 1.729085] hub 1-0:1.0: USB hub found
[ 1.729090] hub 1-0:1.0: 2 ports detected
[ 1.729144] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.729148] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.732904] xHCI xhci_add_endpoint called for root hub
[ 1.732906] xHCI xhci_check_bandwidth called for root hub
[ 1.732928] hub 2-0:1.0: USB hub found
[ 1.732936] hub 2-0:1.0: 2 ports detected
[ 1.732985] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.732990] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.733001] QUIRK: Enable AMD PLL fix
[ 1.733009] ehci_hcd 0000:00:12.2: debug port 1
[ 1.733021] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe3ff800
[ 1.733062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.740034] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.740255] hub 3-0:1.0: USB hub found
[ 1.740258] hub 3-0:1.0: 5 ports detected
[ 1.740687] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.740695] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.740705] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.740722] ehci_hcd 0000:00:13.2: debug port 1
[ 1.740733] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe3ff400
[ 1.750094] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.750206] hub 4-0:1.0: USB hub found
[ 1.750209] hub 4-0:1.0: 5 ports detected
[ 1.750351] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.750357] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
[ 1.750363] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.750378] ehci_hcd 0000:00:16.2: debug port 1
[ 1.750388] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe3ff000
[ 1.760098] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.760204] hub 5-0:1.0: USB hub found
[ 1.760209] hub 5-0:1.0: 4 ports detected
[ 1.763746] ahci 0000:00:11.0: version 3.0
[ 1.763858] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.763860] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.764291] scsi0 : ahci
[ 1.764372] scsi1 : ahci
[ 1.764430] scsi2 : ahci
[ 1.764502] scsi3 : ahci
[ 1.764580] ata1: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffd00 irq 19
[ 1.764583] ata2: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffd80 irq 19
[ 1.764585] ata3: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffe00 irq 19
[ 1.764588] ata4: SATA max UDMA/133 abar m1024@0xfe3ffc00 port 0xfe3ffe80 irq 19
[ 1.764683] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.764692] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
[ 1.764707] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe3fe000
[ 1.764741] ahci 0000:03:00.0: JMB361 has only one port
[ 1.764751] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 1.764800] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 1.764803] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.765140] scsi4 : ahci
[ 1.765338] scsi5 : ahci
[ 1.765646] ata5: SATA max UDMA/133 abar m8192@0xfe7fe000 port 0xfe7fe100 irq 18
[ 1.765648] ata6: DUMMY
[ 1.820899] hub 6-0:1.0: USB hub found
[ 1.820904] hub 6-0:1.0: 5 ports detected
[ 1.821039] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.821046] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
[ 1.821058] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe3fd000
[ 1.877578] hub 7-0:1.0: USB hub found
[ 1.877584] hub 7-0:1.0: 5 ports detected
[ 1.877719] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.877727] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 1.877740] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe3fc000
[ 1.934237] hub 8-0:1.0: USB hub found
[ 1.934241] hub 8-0:1.0: 2 ports detected
[ 1.934370] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.934377] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
[ 1.934389] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe3f7000
[ 1.990896] hub 9-0:1.0: USB hub found
[ 1.990901] hub 9-0:1.0: 4 ports detected
[ 1.994518] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.994597] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.994613] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 2.046757] usb 3-3: new high-speed USB device number 2 using ehci_hcd
[ 2.083454] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.083458] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.250046] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.250074] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.250102] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.250593] ata3.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB00, max UDMA/100
[ 2.250612] ata1.00: ATA-7: ST3250310AS, 4.AAA, max UDMA/133
[ 2.250614] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.251320] ata1.00: configured for UDMA/133
[ 2.251375] ata3.00: configured for UDMA/100
[ 2.251458] scsi 0:0:0:0: Direct-Access ATA ST3250310AS 4.AA PQ: 0 ANSI: 5
[ 2.291849] ata2.00: ATA-7: ST3320620AS, 3.AAC, max UDMA/133
[ 2.291851] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.358525] ata2.00: configured for UDMA/133
[ 2.358670] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 2.359383] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB00 PQ: 0 ANSI: 5
[ 2.360108] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.360405] scsi6 : pata_jmicron
[ 2.360735] scsi7 : pata_jmicron
[ 2.360990] ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
[ 2.360992] ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
[ 2.361679] scsi8 : pata_atiixp
[ 2.362433] scsi9 : pata_atiixp
[ 2.362854] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.362858] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.362920] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.362922] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.362941] sd 0:0:0:0: [sda] Write Protect is off
[ 2.362943] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.362954] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.362966] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.363565] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 2.363568] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.402882] sda: sda1 sda2 < sda5 sda6 >
[ 2.403273] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.431915] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
[ 2.432360] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.460030] Refined TSC clocksource calibration: 3210.701 MHz.
[ 2.460040] Switching to clocksource tsc
[ 2.680750] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.680753] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.680852] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.750017] usb 7-1: new low-speed USB device number 2 using ohci_hcd
[ 2.921679] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input0
[ 2.921733] generic-usb 0003:046D:C317.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0
[ 2.933577] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/input/input1
[ 2.933629] generic-usb 0003:046D:C317.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:13.0-1/input1
[ 2.933653] usbcore: registered new interface driver usbhid
[ 2.933654] usbhid: USB HID core driver
[ 3.163353] usb 6-4: new low-speed USB device number 2 using ohci_hcd
[ 3.348956] generic-usb 0003:0665:5161.0003: hiddev0,hidraw2: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:12.0-4/input0
[ 3.596693] usb 6-5: new full-speed USB device number 3 using ohci_hcd
[ 3.885991] input: Razer Razer Abyssus as /devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input2
[ 3.886063] generic-usb 0003:1532:001C.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer Abyssus] on usb-0000:00:12.0-5/input0
[ 5.238646] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.324239] udevd[206]: starting version 185
[ 7.797181] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor (4 cpu cores) (version 2.20.00)
[ 7.797218] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 7.797219] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 7.797221] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 7.797222] powernow-k8: 3 : pstate 3 (800 MHz)
[ 8.196790] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 8.304203] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 8.304217] ACPI: Power Button [PWRB]
[ 8.304620] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.304635] ACPI: Power Button [PWRF]
[ 8.331257] ATK0110 ATK0110:00: EC enabled
[ 8.336752] EDAC MC: Ver: 2.1.0
[ 8.338834] MCE: In-kernel MCE decoding enabled.
[ 8.340688] AMD64 EDAC driver v3.4.0
[ 8.340873] EDAC amd64: DRAM ECC disabled.
[ 8.340891] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 8.340896] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 8.340900] (Note that use of the override may cause unknown side effects.)
[ 8.362794] wmi: Mapper loaded
[ 8.406853] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 8.407060] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 8.482646] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120111/utaddress-251)
[ 8.482667] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.514277] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 8.514564] r8169 0000:05:00.0: irq 48 for MSI/MSI-X
[ 8.515650] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xffffc900117fa000, 48:5b:39:6f:56:22, XID 0c100000 IRQ 48
[ 8.515660] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.555190] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.590214] firewire_ohci: Added fw-ohci device 0000:04:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 8.608857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.014899] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 9.015006] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 9.015062] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 9.015116] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 9.015170] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 9.015224] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 9.015279] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 9.015336] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 9.090261] firewire_core: created device fw0: GUID 001e8c0000d716c9, S400
[ 9.458722] usbcore: registered new interface driver snd-usb-audio
[ 9.484721] Linux media interface: v0.10
[ 9.842091] Linux video capture interface: v2.00
[ 10.055320] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a2)
[ 10.070374] input: UVC Camera (046d:09a2) as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input14
[ 10.070704] usbcore: registered new interface driver uvcvideo
[ 10.070710] USB Video Class driver (1.1.1)
[ 10.457958] EXT4-fs (sdb5): mounting ext3 file system using the ext4 subsystem
[ 10.474921] EXT4-fs (sdb
5): warning: maximal mount count reached, running e2fsck is recommended
[ 10.475798] EXT4-fs (sdb5): recovery complete
[ 10.475809] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 10.585802] EXT4-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended
[ 10.587863] EXT4-fs (sdb2): recovery complete
[ 10.623562] fuse init (API version 7.18)
[ 10.623569] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 40.499588] systemd-udevd[215]: timeout: killing '/bin/mount -o relatime /dev/sda2 /media/usbhd-sda2' [315]
[ 41.650904] EXT4-fs (sdb1): re-mounted. Opts: (null)this is my xorg.
[ 258.706]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 258.706] X Protocol Version 11, Revision 0
[ 258.706] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 258.707] Current Operating System: Linux myhost 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 258.707] Kernel command line: root=/dev/sdb1 ro
[ 258.707] Build Date: 30 May 2012 07:24:13PM
[ 258.707]
[ 258.707] Current version of pixman: 0.26.0
[ 258.707] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 258.707] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 258.708] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 11 21:23:06 2012
[ 258.732] (==) Using config file: "/etc/X11/xorg.conf"
[ 258.732] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 258.761] (==) ServerLayout "X.org Configured"
[ 258.761] (**) |-->Screen "Screen0" (0)
[ 258.761] (**) | |-->Monitor "Monitor0"
[ 258.761] (**) | |-->Device "Card0"
[ 258.761] (**) |-->Input Device "Mouse0"
[ 258.761] (**) |-->Input Device "Keyboard0"
[ 258.761] (==) Automatically adding devices
[ 258.761] (==) Automatically enabling devices
[ 258.814] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 258.814] Entry deleted from font path.
[ 258.869] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 258.869] Entry deleted from font path.
[ 258.869] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 258.869] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 258.869] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 258.869] (WW) Disabling Mouse0
[ 258.869] (WW) Disabling Keyboard0
[ 258.869] (II) Loader magic: 0x7c58e0
[ 258.869] (II) Module ABI versions:
[ 258.869] X.Org ANSI C Emulation: 0.4
[ 258.869] X.Org Video Driver: 12.0
[ 258.869] X.Org XInput driver : 16.0
[ 258.869] X.Org Server Extension : 6.0
[ 258.871] (--) PCI:*(0:1:5:0) 1002:9714:1043:8454 rev 0, Mem @ 0xd0000000/268435456, 0xfe5f0000/65536, 0xfe400000/1048576, I/O @ 0x0000b000/256
[ 258.871] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 258.871] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 258.871] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 258.871] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 258.871] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 258.871] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 258.871] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 258.871] (II) LoadModule: "record"
[ 258.883] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 258.886] (II) Module record: vendor="X.Org Foundation"
[ 258.886] compiled for 1.12.2, module version = 1.13.0
[ 258.886] Module class: X.Org Server Extension
[ 258.886] ABI class: X.Org Server Extension, version 6.0
[ 258.886] (II) Loading extension RECORD
[ 258.886] (II) LoadModule: "dri"
[ 258.886] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 258.893] (II) Module dri: vendor="X.Org Foundation"
[ 258.893] compiled for 1.12.2, module version = 1.0.0
[ 258.893] ABI class: X.Org Server Extension, version 6.0
[ 258.893] (II) Loading extension XFree86-DRI
[ 258.893] (II) LoadModule: "dbe"
[ 258.893] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 258.894] (II) Module dbe: vendor="X.Org Foundation"
[ 258.894] compiled for 1.12.2, module version = 1.0.0
[ 258.894] Module class: X.Org Server Extension
[ 258.894] ABI class: X.Org Server Extension, version 6.0
[ 258.894] (II) Loading extension DOUBLE-BUFFER
[ 258.894] (II) LoadModule: "extmod"
[ 258.894] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 258.903] (II) Module extmod: vendor="X.Org Foundation"
[ 258.903] compiled for 1.12.2, module version = 1.0.0
[ 258.903] Module class: X.Org Server Extension
[ 258.903] ABI class: X.Org Server Extension, version 6.0
[ 258.903] (II) Loading extension MIT-SCREEN-SAVER
[ 258.903] (II) Loading extension XFree86-VidModeExtension
[ 258.903] (II) Loading extension XFree86-DGA
[ 258.903] (II) Loading extension DPMS
[ 258.903] (II) Loading extension XVideo
[ 258.903] (II) Loading extension XVideo-MotionCompensation
[ 258.903] (II) Loading extension X-Resource
[ 258.903] (II) LoadModule: "dri2"
[ 258.903] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 258.904] (II) Module dri2: vendor="X.Org Foundation"
[ 258.904] compiled for 1.12.2, module version = 1.2.0
[ 258.904] ABI class: X.Org Server Extension, version 6.0
[ 258.904] (II) Loading extension DRI2
[ 258.904] (II) LoadModule: "glx"
[ 258.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 258.916] (II) Module glx: vendor="X.Org Foundation"
[ 258.916] compiled for 1.12.2, module version = 1.0.0
[ 258.916] ABI class: X.Org Server Extension, version 6.0
[ 258.916] (==) AIGLX enabled
[ 258.917] (II) Loading extension GLX
[ 258.917] (II) LoadModule: "radeon"
[ 258.926] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 258.954] (II) Module radeon: vendor="X.Org Foundation"
[ 258.955] compiled for 1.12.1.902, module version = 6.14.99
[ 258.955] Module class: X.Org Video Driver
[ 258.955] ABI class: X.Org Video Driver, version 12.0
[ 258.956] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA
[ 258.963] (--) using VT number 7
[ 258.989] (II) [KMS] Kernel modesetting enabled.
[ 258.989] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 258.989] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 258.989] (==) RADEON(0): Default visual is TrueColor
[ 258.989] (==) RADEON(0): RGB weight 888
[ 258.989] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 258.989] (--) RADEON(0): Chipset: "ATI Radeon HD 4290" (ChipID = 0x9714)
[ 258.989] (II) RADEON(0): PCI card detected
[ 258.989] drmOpenDevice: node name is /dev/dri/card0
[ 258.989] drmOpenDevice: open result is 8, (OK)
[ 258.990] drmOpenByBusid: Searching for BusID pci:0000:01:05.0
[ 258.990] drmOpenDevice: node name is /dev/dri/card0
[ 258.990] drmOpenDevice: open result is 8, (OK)
[ 258.990] drmOpenByBusid: drmOpenMinor returns 8
[ 258.990] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
[ 258.990] (II) Loading sub module "exa"
[ 258.990] (II) LoadModule: "exa"
[ 258.997] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 259.006] (II) Module exa: vendor="X.Org Foundation"
[ 259.006] compiled for 1.12.2, module version = 2.5.0
[ 259.006] ABI class: X.Org Video Driver, version 12.0
[ 259.007] (II) RADEON(0): KMS Color Tiling: enabled
[ 259.007] (II) RADEON(0): KMS Pageflipping: enabled
[ 259.007] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 259.063] (II) RADEON(0): Output VGA-0 using monitor section Monitor0
[ 259.067] (II) RADEON(0): Output DVI-0 has no monitor section
[ 259.124] (II) RADEON(0): EDID for output VGA-0
[ 259.124] (II) RADEON(0): Manufacturer: VSC Model: e28 Serial#: 16843009
[ 259.124] (II) RADEON(0): Year: 2011 Week: 28
[ 259.124] (II) RADEON(0): EDID Version: 1.3
[ 259.124] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 259.124] (II) RADEON(0): Sync: Separate
[ 259.124] (II) RADEON(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 259.124] (II) RADEON(0): Gamma: 2.20
[ 259.124] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 259.124] (II) RADEON(0): Default color space is primary color space
[ 259.124] (II) RADEON(0): First detailed timing is preferred mode
[ 259.124] (II) RADEON(0): redX: 0.644 redY: 0.338 greenX: 0.310 greenY: 0.619
[ 259.124] (II) RADEON(0): blueX: 0.153 blueY: 0.062 whiteX: 0.313 whiteY: 0.329
[ 259.124] (II) RADEON(0): Supported established timings:
[ 259.124] (II) RADEON(0): 720x400@70Hz
[ 259.124] (II) RADEON(0): 640x480@60Hz
[ 259.124] (II) RADEON(0): 640x480@67Hz
[ 259.124] (II) RADEON(0): 640x480@72Hz
[ 259.124] (II) RADEON(0): 640x480@75Hz
[ 259.124] (II) RADEON(0): 800x600@56Hz
[ 259.124] (II) RADEON(0): 800x600@60Hz
[ 259.124] (II) RADEON(0): 800x600@72Hz
[ 259.124] (II) RADEON(0): 800x600@75Hz
[ 259.124] (II) RADEON(0): 832x624@75Hz
[ 259.124] (II) RADEON(0): 1024x768@60Hz
[ 259.124] (II) RADEON(0): 1024x768@70Hz
[ 259.124] (II) RADEON(0): 1024x768@75Hz
[ 259.124] (II) RADEON(0): 1280x1024@75Hz
[ 259.124] (II) RADEON(0): 1152x864@75Hz
[ 259.124] (II) RADEON(0): Manufacturer's mask: 0
[ 259.124] (II) RADEON(0): Supported standard timings:
[ 259.124] (II) RADEON(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 259.124] (II) RADEON(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 259.124] (II) RADEON(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 259.124] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 259.124] (II) RADEON(0): #4: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 259.124] (II) RADEON(0): #5: hsize: 1280 vsize 800 refresh: 75 vid: 3969
[ 259.124] (II) RADEON(0): #6: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 259.124] (II) RADEON(0): #7: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 259.124] (II) RADEON(0): Supported detailed timing:
[ 259.124] (II) RADEON(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 259.124] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 259.124] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 259.124] (II) RADEON(0): Serial No: SDD112801031
[ 259.124] (II) RADEON(0): Ranges: V min: 50 V max: 75 Hz, H min: 24 H max: 82 kHz, PixClock max 175 MHz
[ 259.124] (II) RADEON(0): Monitor name: VA2248 SERIES
[ 259.124] (II) RADEON(0): EDID (in hex):
[ 259.124] (II) RADEON(0): 00ffffffffffff005a63280e01010101
[ 259.124] (II) RADEON(0): 1c15010308301b782ee675a4564f9e27
[ 259.124] (II) RADEON(0): 0f5054bfef80b300a940950081808140
[ 259.124] (II) RADEON(0): 810f8100714f023a801871382d40582c
[ 259.124] (II) RADEON(0): 4500dd0c1100001e000000ff00534444
[ 259.124] (II) RADEON(0): 3131323830313033310a000000fd0032
[ 259.124] (II) RADEON(0): 4b185211000a202020202020000000fc
[ 259.124] (II) RADEON(0): 00564132323438205345524945530056
[ 259.124] (II) RADEON(0): EDID vendor "VSC", prod id 3624
[ 259.124] (II) RADEON(0): Using hsync ranges from config file
[ 259.124] (II) RADEON(0): Using vrefresh ranges from config file
[ 259.124] (II) RADEON(0): Printing DDC gathered Modelines:
[ 259.124] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 259.124] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 259.124] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 259.124] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x800"x0.0 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 259.124] (II) RADEON(0): Printing probed modes for output VGA-0
[ 259.124] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 259.124] (II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 259.124] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 259.124] (II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 259.124] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 259.124] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 259.124] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 259.128] (II) RADEON(0): EDID for output DVI-0
[ 259.128] (II) RADEON(0): Output VGA-0 connected
[ 259.128] (II) RADEON(0): Output DVI-0 disconnected
[ 259.128] (II) RADEON(0): Using exact sizes for initial modes
[ 259.128] (II) RADEON(0): Output VGA-0 using initial mode 1920x1080
[ 259.128] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 259.128] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:17000000 visible:f7d7000
[ 259.128] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 259.128] (**) RADEON(0): Display dimensions: (480, 270) mm
[ 259.128] (**) RADEON(0): DPI set to (101, 101)
[ 259.128] (II) Loading sub module "fb"
[ 259.128] (II) LoadModule: "fb"
[ 259.128] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 259.144] (II) Module fb: vendor="X.Org Foundation"
[ 259.144] compiled for 1.12.2, module version = 1.0.0
[ 259.144] ABI class: X.Org ANSI C Emulation, version 0.4
[ 259.144] (II) Loading sub module "ramdac"
[ 259.144] (II) LoadModule: "ramdac"
[ 259.144] (II) Module "ramdac" already built-in
[ 259.144] (--) Depth 24 pixmap format is 32 bpp
[ 259.152] (II) RADEON(0): [DRI2] Setup complete
[ 259.152] (II) RADEON(0): [DRI2] DRI driver: r600
[ 259.152] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 259.152] (II) RADEON(0): Front buffer size: 8100K
[ 259.152] (II) RADEON(0): VRAM usage limit set to 221119K
[ 259.156] (==) RADEON(0): Backing store disabled
[ 259.156] (II) RADEON(0): Direct rendering enabled
[ 259.169] (II) RADEON(0): Setting EXA maxPitchBytes
[ 259.169] (II) EXA(0): Driver allocated offscreen pixmaps
[ 259.169] (II) EXA(0): Driver registered support for the following operations:
[ 259.169] (II) Solid
[ 259.169] (II) Copy
[ 259.169] (II) Composite (RENDER acceleration)
[ 259.169] (II) UploadToScreen
[ 259.169] (II) DownloadFromScreen
[ 259.169] (II) RADEON(0): Acceleration enabled
[ 259.169] (**) RADEON(0): DPMS enabled
[ 259.169] (==) RADEON(0): Silken mouse enabled
[ 259.174] (II) RADEON(0): Set up textured video
[ 259.174] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 259.174] (II) RADEON(0): [XvMC] Extension initialized.
[ 259.174] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 259.174] (--) RandR disabled
[ 259.174] (II) Initializing built-in extension Generic Event Extension
[ 259.174] (II) Initializing built-in extension SHAPE
[ 259.174] (II) Initializing built-in extension MIT-SHM
[ 259.174] (II) Initializing built-in extension XInputExtension
[ 259.174] (II) Initializing built-in extension XTEST
[ 259.174] (II) Initializing built-in extension BIG-REQUESTS
[ 259.174] (II) Initializing built-in extension SYNC
[ 259.174] (II) Initializing built-in extension XKEYBOARD
[ 259.174] (II) Initializing built-in extension XC-MISC
[ 259.174] (II) Initializing built-in extension SECURITY
[ 259.174] (II) Initializing built-in extension XINERAMA
[ 259.174] (II) Initializing built-in extension XFIXES
[ 259.174] (II) Initializing built-in extension RENDER
[ 259.174] (II) Initializing built-in extension RANDR
[ 259.174] (II) Initializing built-in extension COMPOSITE
[ 259.174] (II) Initializing built-in extension DAMAGE
[ 259.642] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 259.642] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 259.642] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 259.642] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 259.643] (II) AIGLX: Loaded and initialized r600
[ 259.643] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 259.675] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 260.206] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 260.206] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 260.206] (II) LoadModule: "evdev"
[ 260.207] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 260.227] (II) Module evdev: vendor="X.Org Foundation"
[ 260.227] compiled for 1.12.0, module version = 2.7.0
[ 260.227] Module class: X.Org XInput Driver
[ 260.227] ABI class: X.Org XInput driver, version 16.0
[ 260.227] (II) Using input driver 'evdev' for 'Power Button'
[ 260.227] (**) Power Button: always reports core events
[ 260.227] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 260.227] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 260.227] (--) evdev: Power Button: Found keys
[ 260.227] (II) evdev: Power Button: Configuring as keyboard
[ 260.227] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 260.227] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 260.227] (**) Option "xkb_rules" "evdev"
[ 260.227] (**) Option "xkb_model" "evdev"
[ 260.227] (**) Option "xkb_layout" "us"
[ 260.261] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 260.261] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 260.261] (II) Using input driver 'evdev' for 'Power Button'
[ 260.261] (**) Power Button: always reports core events
[ 260.261] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 260.261] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 260.261] (--) evdev: Power Button: Found keys
[ 260.261] (II) evdev: Power Button: Configuring as keyboard
[ 260.261] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 260.261] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 260.261] (**) Option "xkb_rules" "evdev"
[ 260.261] (**) Option "xkb_model" "evdev"
[ 260.261] (**) Option "xkb_layout" "us"
[ 260.263] (II) config/udev: Adding input device Razer Razer Abyssus (/dev/input/event2)
[ 260.263] (**) Razer Razer Abyssus: Applying InputClass "evdev pointer catchall"
[ 260.263] (II) Using input driver 'evdev' for 'Razer Razer Abyssus'
[ 260.263] (**) Razer Razer Abyssus: always reports core events
[ 260.263] (**) evdev: Razer Razer Abyssus: Device: "/dev/input/event2"
[ 260.263] (--) evdev: Razer Razer Abyssus: Vendor 0x1532 Product 0x1c
[ 260.263] (--) evdev: Razer Razer Abyssus: Found 11 mouse buttons
[ 260.263] (--) evdev: Razer Razer Abyssus: Found scroll wheel(s)
[ 260.263] (--) evdev: Razer Razer Abyssus: Found relative axes
[ 260.263] (--) evdev: Razer Razer Abyssus: Found x and y relative axes
[ 260.263] (II) evdev: Razer Razer Abyssus: Configuring as mouse
[ 260.263] (II) evdev: Razer Razer Abyssus: Adding scrollwheel support
[ 260.263] (**) evdev: Razer Razer Abyssus: YAxisMapping: buttons 4 and 5
[ 260.263] (**) evdev: Razer Razer Abyssus: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 260.263] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-5/6-5:1.0/input/input2/event2"
[ 260.263] (II) XINPUT: Adding extended input device "Razer Razer Abyssus" (type: MOUSE, id 8)
[ 260.263] (II) evdev: Razer Razer Abyssus: initialized for relative axes.
[ 260.264] (**) Razer Razer Abyssus: (accel) keeping acceleration scheme 1
[ 260.264] (**) Razer Razer Abyssus: (accel) acceleration profile 0
[ 260.264] (**) Razer Razer Abyssus: (accel) acceleration factor: 2.000
[ 260.264] (**) Razer Razer Abyssus: (accel) acceleration threshold: 4
[ 260.264] (II) config/udev: Adding input device Razer Razer Abyssus (/dev/input/mouse0)
[ 260.264] (II) No input driver specified, ignoring this device.
[ 260.265] (II) This device may have been added with another device file.
[ 260.265] (II) config/udev: Adding input device UVC Camera (046d:09a2) (/dev/input/event14)
[ 260.265] (**) UVC Camera (046d:09a2): Applying InputClass "evdev keyboard catchall"
[ 260.265] (II) Using input driver 'evdev' for 'UVC Camera (046d:09a2)'
[ 260.265] (**) UVC Camera (046d:09a2): always reports core events
[ 260.265] (**) evdev: UVC Camera (046d:09a2): Device: "/dev/input/event14"
[ 260.265] (--) evdev: UVC Camera (046d:09a2): Vendor 0x46d Product 0x9a2
[ 260.265] (--) evdev: UVC Camera (046d:09a2): Found keys
[ 260.265] (II) evdev: UVC Camera (046d:09a2): Configuring as keyboard
[ 260.265] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3:1.0/input/input14/event14"
[ 260.266] (II) XINPUT: Adding extended input device "UVC Camera (046d:09a2)" (type: KEYBOARD, id 9)
[ 260.266] (**) Option "xkb_rules" "evdev"
[ 260.266] (**) Option "xkb_model" "evdev"
[ 260.266] (**) Option "xkb_layout" "us"
[ 260.266] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event0)
[ 260.266] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 260.266] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[ 260.266] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 260.266] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event0"
[ 260.266] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[ 260.266] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[ 260.266] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 260.266] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.0/input/input0/event0"
[ 260.266] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 10)
[ 260.266] (**) Option "xkb_rules" "evdev"
[ 260.266] (**) Option "xkb_model" "evdev"
[ 260.266] (**) Option "xkb_layout" "us"
[ 260.267] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event1)
[ 260.267] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 260.267] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[ 260.267] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 260.267] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event1"
[ 260.267] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[ 260.267] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[ 260.267] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 260.267] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb7/7-1/7-1:1.1/input/input1/event1"
[ 260.267] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[ 260.267] (**) Option "xkb_rules" "evdev"
[ 260.267] (**) Option "xkb_model" "evdev"
[ 260.267] (**) Option "xkb_layout" "us"
[ 260.267] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event10)
[ 260.267] (II) No input driver specified, ignoring this device.
[ 260.267] (II) This device may have been added with another device file.
[ 260.267] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event11)
[ 260.267] (II) No input driver specified, ignoring this device.
[ 260.267] (II) This device may have been added with another device file.
[ 260.267] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event12)
[ 260.267] (II) No input driver specified, ignoring this device.
[ 260.267] (II) This device may have been added with another device file.
[ 260.268] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event13)
[ 260.268] (II) No input driver specified, ignoring this device.
[ 260.268] (II) This device may have been added with another device file.
[ 260.268] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event6)
[ 260.268] (II) No input driver specified, ignoring this device.
[ 260.268] (II) This device may have been added with another device file.
[ 260.268] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[ 260.268] (II) No input driver specified, ignoring this device.
[ 260.268] (II) This device may have been added with another device file.
[ 260.268] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
[ 260.268] (II) No input driver specified, ignoring this device.
[ 260.268] (II) This device may have been added with another device file.
[ 260.268] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
[ 260.268] (II) No input driver specified, ignoring this device.
[ 260.268] (II) This device may have been added with another device file.
[ 260.268] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 260.268] (II) No input driver specified, ignoring this device.
[ 260.268] (II) This device may have been added with another device file.
[ 277.874] (II) RADEON(0): EDID vendor "VSC", prod id 3624
[ 277.874] (II) RADEON(0): Using hsync ranges from config file
[ 277.874] (II) RADEON(0): Using vrefresh ranges from config file
[ 277.874] (II) RADEON(0): Printing DDC gathered Modelines:
[ 277.874] (II) RADEON(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 277.874] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 277.874] (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 277.874] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 277.874] (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 277.874] (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 277.874] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 277.874] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 277.874] (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 277.874] (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 277.874] (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1280x800"x0.0 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
[ 277.874] (II) RADEON(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e) As far I see nothing change too much the other thing I note is that udev take a lot than before on boot. Still figuring out what is? =s
Thanks for all thelp.
Offline
#27 2012-06-12 01:17:41
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,148
Re: Shutdown and reboot not working
@Cerbereus
What do you have in fstab?
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#28 2012-06-12 02:38:06
- vfbsilva
- Member
- From: Brazil
- Registered: 2010-04-08
- Posts: 103
Re: Shutdown and reboot not working
I seem to have found a suspect via dmesg here it goes, I've highlighted the relevant section
[ 1441.563262] INFO: task shutdown:1011 blocked for more than 120 seconds.
[ 1441.563264] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1441.563262] INFO: task shutdown:1011 blocked for more than 120 seconds.
[ 1441.563264] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1441.563266] shutdown D ffff88021cc9e3c8 0 1011 1005 0x00000004
[ 1441.563270] ffff88021f8c7e30 0000000000000086 ffff88021cc9e000 ffff88021f8c7fd8
[ 1441.563273] ffff88021f8c7fd8 ffff88021f8c7fd8 ffffffff8180d020 ffff88021cc9e000
[ 1441.563275] 0007ffffffffffff ffff8802207da400 0000000000000000 0000000000000000
[ 1441.563278] Call Trace:
[ 1441.563284] [<ffffffff81080ab2>] ? default_wake_function+0x12/0x20
[ 1441.563287] [<ffffffff8119a7b0>] ? __sync_filesystem+0x90/0x90
[ 1441.563290] [<ffffffff8121fc28>] ? blk_finish_plug+0x18/0x50
[ 1441.563292] [<ffffffff8145e50f>] schedule+0x3f/0x60
[ 1441.563294] [<ffffffff8145ef35>] rwsem_down_failed_common+0xc5/0x160
[ 1441.563297] [<ffffffff81115f42>] ? do_writepages+0x22/0x50
[ 1441.563299] [<ffffffff8119a7b0>] ? __sync_filesystem+0x90/0x90
[ 1441.563301] [<ffffffff8145f005>] rwsem_down_read_failed+0x15/0x17
[ 1441.563303] [<ffffffff81248434>] call_rwsem_down_read_failed+0x14/0x30
[ 1441.563305] [<ffffffff8145d3d7>] ? down_read+0x17/0x20
[ 1441.563308] [<ffffffff8116fb40>] iterate_supers+0x80/0xf0
[ 1441.563309] [<ffffffff8119a8e0>] sys_sync+0x30/0x70
[ 1441.563312] [<ffffffff814602a9>] system_call_fastpath+0x16/0x1b
[ 3927.587097] nepomukindexer[10174]: segfault at ffffffffffffffe8 ip 00007f7990350b23 sp 00007fff1a81ea58 error 4 in libstreams.so.0.7.7[7f7990323000+37000][/b]
[48994.795136] TCP: Peer 0000:0000:0000:0000:0000:ffff:503b:7219:53079/44307 unexpectedly shrunk window 4184862400:4184862405 (repaired)
[48999.861819] TCP: Peer 0000:0000:0000:0000:0000:ffff:503b:7219:53079/44307 unexpectedly shrunk window 4184862400:4184862405 (repaired)
[49009.995133] TCP: Peer 0000:0000:0000:0000:0000:ffff:503b:7219:53079/44307 unexpectedly shrunk window 4184862400:4184862405 (repaired)
[49030.288486] TCP: Peer 0000:0000:0000:0000:0000:ffff:503b:7219:53079/44307 unexpectedly shrunk window 4184862400:4184862405 (repaired)
[49070.875145] TCP: Peer 0000:0000:0000:0000:0000:ffff:503b:7219:53079/44307 unexpectedly shrunk window 4184862400:4184862405 (repaired)
[49152.048470] TCP: Peer 0000:0000:0000:0000:0000:ffff:503b:7219:53079/44307 unexpectedly shrunk window 4184862400:4184862405 (repaired)My last boot log:
Mon Jun 11 09:15:38 2012: :: Adjusting system time and setting kernel timezone [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Starting UDev Daemon [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Triggering UDev uevents [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Loading User-specified Modules [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Waiting for UDev uevents to be processed [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Configuring Virtual Consoles [BUSY] ^[%@ [DONE]
Mon Jun 11 09:15:38 2012: :: Bringing up loopback interface [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Unlocking encrypted volumes: [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Checking Filesystems [BUSY] /dev/sdb5: recovering journal
Mon Jun 11 09:15:38 2012: /dev/sdb5: clean, 35/125488 files, 44708/500068 blocks
Mon Jun 11 09:15:38 2012: [DONE]
Mon Jun 11 09:15:38 2012: :: Remounting Root [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Mounting Local Filesystems [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Activating Swap [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Configuring Time Zone [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Initializing Random Seed [BUSY] [DONE]
Mon Jun 11 09:15:38 2012: :: Removing Leftover Files [BUSY] [DONE]
Mon Jun 11 09:15:39 2012: :: Setting Hostname: mordor [BUSY] [DONE]
Mon Jun 11 09:15:39 2012: :: Saving dmesg Log [BUSY] [DONE]
Mon Jun 11 09:15:39 2012: INIT: Entering runlevel: 3
Mon Jun 11 09:15:40 2012: :: Starting Syslog-NG [BUSY] [DONE]
Mon Jun 11 09:15:40 2012: :: Starting Cron Daemon [BUSY] [DONE]
Mon Jun 11 09:15:40 2012: :: Restoring ALSA Levels [BUSY] [DONE]
Mon Jun 11 09:15:40 2012: :: Starting D-BUS system messagebus [BUSY] [DONE]
Mon Jun 11 09:15:41 2012: :: main up [BUSY] [DONE]
Mon Jun 11 09:15:50 2012: :: Mounting Network Filesystems [BUSY] [DONE] By the way is it somehow related?
https://bugzilla.redhat.com/show_bug.cgi?id=662433
I've googled a bit and came with a solution which gives us some insights
http://www.linuxjournal.com/content/rebooting-magic-way
Seems something is not properly unmounting.
SO you can for it with:
echo 1 > /proc/sys/kernel/sysrq
echo b > /proc/sysrq-triggerForcing a shut down, still no clear way out of it. Ideas?
Last edited by vfbsilva (2012-06-12 03:31:28)
Offline
#29 2012-06-12 06:02:03
- Thanoulis
- Member
- From: Lamia, Greece
- Registered: 2009-05-03
- Posts: 33
- Website
Re: Shutdown and reboot not working
Maybe it's a long shot, but try to update your BIOS.
-- Beware of he who would deny you access to information, for in his heart he dreams himself your master.
Offline
#30 2012-06-12 07:54:31
- DSpider
- Member
- From: Romania
- Registered: 2009-08-23
- Posts: 2,273
Re: Shutdown and reboot not working
Cerbereus and vfbsilva, post your fstab. Let's see how you're mounting those drives.
Also, you guys should probably run an fsck.
Last edited by DSpider (2012-06-12 07:54:47)
I have made a personal commitment not to reply in topics that start with a lowercase letter. Proper grammar and punctuation is a sign of respect, and if you do not show any, you will NOT receive any help (at least not from me).
Offline
#31 2012-06-12 12:01:27
- vfbsilva
- Member
- From: Brazil
- Registered: 2010-04-08
- Posts: 103
Re: Shutdown and reboot not working
DSpider wrote:
Cerbereus and vfbsilva, post your fstab. Let's see how you're mounting those drives.
Also, you guys should probably run an fsck.
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
UUID=08f89b0d-4691-463d-af8f-6092774acb43 /boot ext4 defaults 0 1
UUID=8084cf06-452a-4e04-a89a-0f017461b727 / ext4 defaults,user_xattr 0 1
UUID=87bb0031-ae64-4e3b-b0e4-cbed286b6893 swap swap defaults 0 0
#/dev/sdc1 /mnt/hitachi ntfs-3g gid=users,fmask=113,dmask=002,user,nofail 0 0
/dev/sr0/ /mnt/cdrom iso9660 gid=users,ro,user,noauto,unhide 0 0
#/dev/sdd1 /mnt/usb auto gid=users,fmask=113,dmask=002,user,nofail 0 0
#/dev/sdd2 /mnt/usb2 auto gid=users,fmask=113,dmask=002,user,nofail 0 0
#/dev/sdd1 /mnt/usb auto rw,noauto,flush,user 0 0
#/dev/sdd2 /mnt/usb2 auto rw,noauto,flush,user 0 0
none /proc/bus/usb usbfs auto,busgid=108,busmode=0775,devgid=121,devmode=0664 0 0fsck failed.It reported /dev/sda5 was mounted. Is there any proper way I should use to call fsck? I did create a /fsck file on / is there other more appropriate command to do it? Problably you asked for my fstab expecting an error like this right? Would it be better to run fsck from a livecd?
It seems the problem is a bit older than we tought https://bbs.archlinux.org/viewtopic.php?id=142644
Last edited by vfbsilva (2012-06-12 21:39:35)
Offline
#32 2012-06-12 22:24:55
- Cerbereus
- Member
- Registered: 2008-10-06
- Posts: 41
Re: Shutdown and reboot not working
hello sorry for post so late, well I was at work here is my /etc/fstab/
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sdb1 / ext4 defaults 0 1
/dev/sdb2 /home ext4 defaults 0 1 I already fsck all my hard drives and they are fine when i run it in the weekend. I hope to fix this soon.
Thanks again for all the help fellas.
Offline
#33 2012-06-13 01:36:37
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,148
Re: Shutdown and reboot not working
@Cerbereus
So is sda a supposed to be a removable usb drive and sdb your root drive?
It would probably be better to use UUIDs or disk labels in fstab rather than e.g. /dev/sdb* since these can change, I believe. Also, I think the home line should end in "2" rather than "1" (but that is probably not causing any problems).
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#34 2012-06-13 01:39:13
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,148
Re: Shutdown and reboot not working
vfbsilva wrote:
It seems the problem is a bit older than we tought https://bbs.archlinux.org/viewtopic.php?id=142644
So is your /home on NFS?
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#35 2012-06-13 03:08:02
- vfbsilva
- Member
- From: Brazil
- Registered: 2010-04-08
- Posts: 103
Re: Shutdown and reboot not working
cfr wrote:
vfbsilva wrote:It seems the problem is a bit older than we tought https://bbs.archlinux.org/viewtopic.php?id=142644
So is your /home on NFS?
Well I think the answer is no it is a local machine should I remove the daemon from my daemons array?
A thing I've noticed is for some reason /dev/sdb5 which is my /boot partition in another harddisk keeps mounted after the boot process which was not the previous behaviour as far as I can remmember. I googled a bit and found no reasons to make it noauto. Can it be related to the problem?
Last edited by vfbsilva (2012-06-13 05:11:08)
Offline
#36 2012-06-13 05:42:10
- wottam
- Member
- From: Spain
- Registered: 2007-08-31
- Posts: 59
Re: Shutdown and reboot not working
Hi,
I'm having the same problem both in my desktop and my laptop. Downgrading to kernel 3.3.7 makes it possible to reboot and shutdown the machines.
Error message
Jun 10 11:49:49 localhost shutdown[3001]: shutting down for system halt
Jun 10 11:51:16 localhost ntpd[773]: adjusting local clock by -3.267445s
Jun 10 11:52:18 localhost kernel: [ 7804.373032] INFO: task shutdown:3001 blocked for more than 120 seconds.
Jun 10 11:52:18 localhost kernel: [ 7804.373034] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jun 10 11:52:18 localhost kernel: [ 7804.373035] shutdown D ffff88012736bbc8 0 3001 2984 0x00000000
Jun 10 11:52:18 localhost kernel: [ 7804.373038] ffff880104a79e30 0000000000000082 ffff88012736b800 ffff880104a79fd8
Jun 10 11:52:18 localhost kernel: [ 7804.373040] ffff880104a79fd8 ffff880104a79fd8 ffff880129339800 ffff88012736b800
Jun 10 11:52:18 localhost kernel: [ 7804.373042] 0007ffffffffffff ffff880127105a00 0000000000000000 0000000000000000
Jun 10 11:52:18 localhost kernel: [ 7804.373044] Call Trace:
Jun 10 11:52:18 localhost kernel: [ 7804.373049] [<ffffffff81080ab2>] ? default_wake_function+0x12/0x20
Jun 10 11:52:18 localhost kernel: [ 7804.373052] [<ffffffff8119a7b0>] ? __sync_filesystem+0x90/0x90
Jun 10 11:52:18 localhost kernel: [ 7804.373054] [<ffffffff8121fc28>] ? blk_finish_plug+0x18/0x50
Jun 10 11:52:18 localhost kernel: [ 7804.373057] [<ffffffff8145e50f>] schedule+0x3f/0x60
Jun 10 11:52:18 localhost kernel: [ 7804.373058] [<ffffffff8145ef35>] rwsem_down_failed_common+0xc5/0x160
Jun 10 11:52:18 localhost kernel: [ 7804.373060] [<ffffffff81115f42>] ? do_writepages+0x22/0x50
Jun 10 11:52:18 localhost kernel: [ 7804.373062] [<ffffffff8119a7b0>] ? __sync_filesystem+0x90/0x90
Jun 10 11:52:18 localhost kernel: [ 7804.373063] [<ffffffff8145f005>] rwsem_down_read_failed+0x15/0x17
Jun 10 11:52:18 localhost kernel: [ 7804.373065] [<ffffffff81248434>] call_rwsem_down_read_failed+0x14/0x30
Jun 10 11:52:18 localhost kernel: [ 7804.373067] [<ffffffff8145d3d7>] ? down_read+0x17/0x20
Jun 10 11:52:18 localhost kernel: [ 7804.373069] [<ffffffff8116fb40>] iterate_supers+0x80/0xf0
Jun 10 11:52:18 localhost kernel: [ 7804.373070] [<ffffffff8119a8e0>] sys_sync+0x30/0x70
Jun 10 11:52:18 localhost kernel: [ 7804.373073] [<ffffffff814602a9>] system_call_fastpath+0x16/0x1bFstab
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
UUID=074d9827-43ea-4607-8820-0bb06e2eea18 /boot ext3 defaults 0 1
UUID=32c8d1cc-74e1-424e-b738-d327064fc6ca / ext4 defaults,noatime,discard 0 1
UUID=57da5e49-bd3d-487b-8304-d64dd7d7714b swap swap defaults 0 0
UUID=8f76b70c-dc88-4fb6-92d5-57e5374fc98c /media/data ext4 defaults,user,exec 0 1
UUID=d8b9e2bb-7416-4f94-8df6-66e1ed44aabb /var ext4 defaults 0 1
UUID=72589CE4589CA87D /media/wincoming ntfs-3g defaults,gid=users,fmask=113,dmask=002 0 0
UUID=7E825265825221C7 /media/windows ntfs-3g defaults,gid=users,fmask=113,dmask=002 0 0Offline
#37 2012-06-13 05:53:43
- vfbsilva
- Member
- From: Brazil
- Registered: 2010-04-08
- Posts: 103
Re: Shutdown and reboot not working
My old kernel is not in /var/cache/pacman/pkg/ anymore.
what do you suggest me to do folks? Can I just download it from the website? Just checked http://www.archlinux.org/packages/core/x86_64/linux/ but they don't link the old versions, What can I do?
Offline
#38 2012-06-13 06:12:49
- arti74
- Member
- From: Poland
- Registered: 2009-10-21
- Posts: 27
Re: Shutdown and reboot not working
The same problem here. So are we suppose to wait for the next kernel update?
Offline
#39 2012-06-13 06:21:37
- progandy
- Member
- Registered: 2012-05-17
- Posts: 5,262
Re: Shutdown and reboot not working
vfbsilva wrote:
My old kernel is not in /var/cache/pacman/pkg/ anymore.
what do you suggest me to do folks? Can I just download it from the website? Just checked http://www.archlinux.org/packages/core/x86_64/linux/ but they don't link the old versions, What can I do?
Use the Arch Rollback Machine, https://wiki.archlinux.org/index.php/Do … ckages#ARM
Last edited by progandy (2012-06-13 06:23:07)
| alias CUTF='LANG=en_XX.UTF-8@POSIX ' |
Online
#40 2012-06-13 12:31:07
- Cerbereus
- Member
- Registered: 2008-10-06
- Posts: 41
Re: Shutdown and reboot not working
Btw arti74, vfbsilva, wottam yesterday i was checking and i notice my time is wrong I dunno why this happen, this hapenn with the time of my system as the hardware clock, they are crazy, are you having this issue too?
There is a kernel upgrade soon because is in testing maybe today i will check later try to install the kernel of testing or decide to wait and see if this fix my problem is good to know that more people is with the same problems.
Cfr sda is another hard drive with windows 7 , right now i don' t have clue they use it as usb, since the last upgrade a lot of thing change without notice until now. if is physical hard drive how I must be configure it, sdb is my root hard drive of linux.
Thanks for all the help.
Offline
#41 2012-06-13 14:03:37
- DrMonkey
- Member
- From: Suzhou, China
- Registered: 2009-09-01
- Posts: 18
- Website
Re: Shutdown and reboot not working
Hi. Same problem for me, shutdown/reboot fails since upgrade to 3.3.8-1. I got a pretty much vanilla configuration. My rc.conf
# LOCALIZATION
# ------------
HARDWARECLOCK="UTC"
TIMEZONE="Asia/Shanghai"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="yes"
USECOLOR="yes"# HARDWARE
# --------
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"# NETWORKING
# ----------
HOSTNAME="fulgurax"interface=eth0
address=
netmask=
broadcast=
gateway=NETWORK_PERSIST="no"
# DAEMONS
# -------
#
DAEMONS=(hwclock syslog-ng dbus networkmanager netfs crond)
The system prints on the console
[ 1441.563262] INFO: task shutdown:1011 blocked for more than 120 seconds.
[ 1441.563264] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Offline
#42 2012-06-13 14:06:48
- vfbsilva
- Member
- From: Brazil
- Registered: 2010-04-08
- Posts: 103
Re: Shutdown and reboot not working
progandy wrote:
vfbsilva wrote:My old kernel is not in /var/cache/pacman/pkg/ anymore.
what do you suggest me to do folks? Can I just download it from the website? Just checked http://www.archlinux.org/packages/core/x86_64/linux/ but they don't link the old versions, What can I do?Use the Arch Rollback Machine, https://wiki.archlinux.org/index.php/Do … ckages#ARM
I did a mess, a kernel downgrade, downloaded kernel 3.3.7 from arch time machine and did pacman -U kernel26-2.6.39.3-1-x86_64.pkg.tar.xz
System rebuilt modules and so on. After reboot it seems to report my /boot is not a valid partition type with ext2fs. Still grub which is installed there works and I can boot my windows.
My plan now is download a live cd do a chroot to my old arch and try to update the kernel for the old state is it manageable?
P.S. cool to see I'm not alone 
Offline
#43 2012-06-13 21:42:51
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,148
Re: Shutdown and reboot not working
vfbsilva wrote:
A thing I've noticed is for some reason /dev/sdb5 which is my /boot partition in another harddisk keeps mounted after the boot process which was not the previous behaviour as far as I can remmember. I googled a bit and found no reasons to make it noauto. Can it be related to the problem?
I doubt it. You have told fstab to mount it with default options so it will be mounted. Unless you sometime later have added a command to unmount it? I'm kind of surprised it wasn't mounted by default anyway, though, so maybe I'm wrong and it makes a difference it is on another disk.
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#44 2012-06-13 21:46:07
- cfr
- Member
- From: Cymru
- Registered: 2011-11-27
- Posts: 7,148
Re: Shutdown and reboot not working
Cerbereus wrote:
Cfr sda is another hard drive with windows 7 , right now i don' t have clue they use it as usb, since the last upgrade a lot of thing change without notice until now. if is physical hard drive how I must be configure it, sdb is my root hard drive of linux.
Thanks for all the help.
It would probably be better to use UUIDs or disk labels in fstab rather than e.g. /dev/sdb* since these can change, I believe.
If sda is an internal drive, maybe it would be better to list it in fstab?
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
#45 2012-06-14 01:21:26
- Cerbereus
- Member
- Registered: 2008-10-06
- Posts: 41
Re: Shutdown and reboot not working
Well it fix it with kernel linux-3.3.7-1 it looks like the 3.3.8-1 was causing this problem i dont have idea why but anyway i will wait for next update of kernel if see this fix it, so at the end i downgrade the kernel was lucky i didn't delete it.
Cheers.
Offline
#46 2012-06-14 02:11:03
- vfbsilva
- Member
- From: Brazil
- Registered: 2010-04-08
- Posts: 103
Re: Shutdown and reboot not working
Cerbereus wrote:
Well it fix it with kernel linux-3.3.7-1 it looks like the 3.3.8-1 was causing this problem i dont have idea why but anyway i will wait for next update of kernel if see this fix it, so at the end i downgrade the kernel was lucky i didn't delete it.
Cheers.
How did you downgrade the kernel? I did it and many things got broken.
Offline
#47 2012-06-14 07:41:22
- mind_the_gap
- Member
- Registered: 2010-07-27
- Posts: 14
Re: Shutdown and reboot not working
vfbsilva wrote:
Cerbereus wrote:Well it fix it with kernel linux-3.3.7-1 it looks like the 3.3.8-1 was causing this problem i dont have idea why but anyway i will wait for next update of kernel if see this fix it, so at the end i downgrade the kernel was lucky i didn't delete it.
Cheers.How did you downgrade the kernel? I did it and many things got broken.
I was facing the very same problem and could fix it with a downgrade. What I did was the following:
1. Search the ARM for linux in your architecture (was x86_64 for me).
2. Find the 3.3.7-1 kernel and download it (for me this). I also downloaded the signature file, don't know if needed, though.
3. use pacman -U <dowloaded-file> to install it (here pacman -U linux-3.3.7-1-x86_64.pkg.tar.xz). It will (of course) call mkinitcpio to create the initial ram disk.
This worked without problems and now everything runs (or better: shuts down 
) again. Thanks for the downgrade pointer.
Cheers,
mtg
Offline
#48 2012-06-14 07:59:14
- DSpider
- Member
- From: Romania
- Registered: 2009-08-23
- Posts: 2,273
Re: Shutdown and reboot not working
This would've also worked:
# pacman -U http://arm.konnichi.com/core/os/x86_64/linux-3.3.7-1-x86_64.pkg.tar.xzI have made a personal commitment not to reply in topics that start with a lowercase letter. Proper grammar and punctuation is a sign of respect, and if you do not show any, you will NOT receive any help (at least not from me).
Offline
#49 2012-06-14 12:19:14
- Cerbereus
- Member
- Registered: 2008-10-06
- Posts: 41
Re: Shutdown and reboot not working
vfbsilva, well i search in my /var/cache/pacman/pkg/ so there was, i search for the previous one(linux 3.3.7-1) so far didn't broke anything even the system boot faster as before and shutdown without a problem, if you don't have in that directory try the way of min_the_gap that is the same, I think. Hope everyone fix this problem .
Greetings from Uruguay people.
Offline
#50 2012-06-14 13:56:02
- vfbsilva
- Member
- From: Brazil
- Registered: 2010-04-08
- Posts: 103
Re: Shutdown and reboot not working
Cerbereus wrote:
vfbsilva, well i search in my /var/cache/pacman/pkg/ so there was, i search for the previous one(linux 3.3.7-1) so far didn't broke anything even the system boot faster as before and shutdown without a problem, if you don't have in that directory try the way of min_the_gap that is the same, I think. Hope everyone fix this problem
Greetings from Uruguay people.
For me it did not work, I'm clueless. it reports a problem reading /boot partition saying something about it being not a valid ext2 partition. I need to take a picture of that as it hangs before init 1 so I have no logs. I was able to chroot and revert to 3.3.8-1 kernel. Also, is there a procedure I can use to have multiple kernels? Well of course it is, better question is wheter https://wiki.archlinux.org/index.php/Ke … ild_System is the best approach to do so. I still clueless about what is the problem.
I will try to build my kernel again and see what happens. By the way so far I've used only vanilla kernels.
Greetings from the gaucho people of Brazil
Offline