You are not logged in.
Hi All,
I've been running ArchLinux on my Raspberry PI for a while now, but I've noted some difference in the outputs I get on the serial (/dev/AMA0) between Arch and Debian that I hope someone might be able to offer insight on.
When I connect to serial UART under the standard Debian image for the PI, I am able to see the entire boot sequence - right from processor identification, through kernel boot parameters all the way to login prompt.
When I connect in the same way to the PI booting the Arch image, I see nothing but about 15x "white '?' on black diamond) symbols until the login prompt appears.
So I can use the serial, but I would really like to see the boot sequence as this is some of the benefit of the serial connection to me. I have checked /boot/cmdline.txt and it appears to enable the port (console=ttyAMA0,115200).
Does anyone know where I would start with trying to get information printed to serial sooner?
Thanks in advance.
Last edited by scruffmeister (2012-07-11 19:51:31)
Offline
I had the same problem. What fixed it for me is setting loglevel=5 instead of 2 inside /boot/cmdline.txt
Offline
@ricochet1k - Thanks! That solved it... I actually set mine to loglevel=6 (KERN_INFO) after some experimentation.
More documentation here on all the options/valid values for anyone else who might be interested.
Offline