You are not logged in.

Pages: 1

#1 2012-07-21 09:46:12

cdwijs
Member
Registered: 2010-04-24
Posts: 289

[SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

Hi All,

After a update of my laptop, it does not fully wakes after going into suspend. It does not react to numlock anymore.  I have to push the power button for 10 seconds to shut it down.

/var/log/everything.log, normal operations:

Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sending IPv6 Router Solicitation
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: sendmsg: Cannot assign requested address
Jul 21 03:42:38 localhost dhcpcd[1029]: wlan0: no IPv6 Routers available
Jul 21 03:42:45 localhost dbus[533]: [system] Activating service name='org.freedesktop.ConsoleKit' (using servicehelper)
Jul 21 03:42:45 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Jul 21 03:42:45 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:45 localhost acpid: 1 client rule loaded
Jul 21 03:42:46 localhost NetworkManager[559]: <info> (wlan0): IP6 addrconf timed out or failed.
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jul 21 03:42:46 localhost NetworkManager[559]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 03:42:50 localhost acpid: client connected from 1134[0:1000]
Jul 21 03:42:50 localhost acpid: 1 client rule loaded
Jul 21 03:42:55 localhost kernel: [   48.812457] fuse init (API version 7.18)
Jul 21 03:42:59 localhost dbus[533]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jul 21 03:42:59 localhost udisksd[1209]: udisks daemon version 1.94.0 starting
Jul 21 03:42:59 localhost dbus[533]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jul 21 03:42:59 localhost udisksd[1209]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jul 21 04:01:01 localhost /USR/SBIN/CROND[1363]: (root) CMD (run-parts /etc/cron.hourly)
Jul 21 04:01:01 localhost anacron[1369]: Anacron started on 2012-07-21
Jul 21 04:01:01 localhost anacron[1369]: Will run job `cron.daily' in 42 min.
Jul 21 04:01:01 localhost anacron[1369]: Jobs will be executed sequentially
Jul 21 04:21:01 localhost -- MARK --

/var/log/everything.log, after starting suspend:

Jul 21 04:21:13 localhost kernel: [ 2346.821030] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:21:13 localhost kernel: [ 2347.000872] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:10 localhost kernel: [ 2349.512404] PM: Syncing filesystems ... done.
Jul 21 04:25:10 localhost kernel: [ 2349.514874] PM: Preparing system for mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.514891] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.526541] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:25:10 localhost kernel: [ 2349.539896] PM: Entering mem sleep
Jul 21 04:25:10 localhost kernel: [ 2349.539930] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:25:10 localhost kernel: [ 2349.573787] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:25:10 localhost kernel: [ 2349.611052] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2349.613512] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:25:10 localhost kernel: [ 2350.236650] PM: suspend of devices complete after 696.314 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.236925] PM: late suspend of devices complete after 0.270 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.237272] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.266603] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.303271] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.326605] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.343218] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.379942] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.403292] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426606] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.426678] PM: noirq suspend of devices complete after 189.749 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.427140] ACPI: Preparing to enter system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.519991] PM: Saving platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.520810] Disabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.623205] CPU 1 is now offline
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] ACPI: Low-level resume complete
Jul 21 04:25:10 localhost kernel: [ 2350.623688] PM: Restoring platform NVS memory
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Extended CMOS year: 2000
Jul 21 04:25:10 localhost kernel: [ 2350.623688] Enabling non-boot CPUs ...
Jul 21 04:25:10 localhost kernel: [ 2350.630554] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:25:10 localhost kernel: [ 2350.641916] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:25:10 localhost kernel: [ 2350.645407] CPU1 is up
Jul 21 04:25:10 localhost kernel: [ 2350.647122] ACPI: Waking up from system sleep state S3
Jul 21 04:25:10 localhost kernel: [ 2350.653227] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.659889] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.666555] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.683204] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.689888] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.696556] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.713204] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.715075] PM: noirq resume of devices complete after 67.761 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715286] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:25:10 localhost kernel: [ 2350.715344] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715373] usb usb1: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715391] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715421] usb usb2: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715437] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715465] usb usb3: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715480] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715521] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715540] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
Jul 21 04:25:10 localhost kernel: [ 2350.715550] usb usb4: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715571] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715601] usb usb5: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715611] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715623] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715639] usb usb6: root hub lost power or was reset
Jul 21 04:25:10 localhost kernel: [ 2350.715647] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715663] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715667] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:25:10 localhost kernel: [ 2350.715690] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:25:10 localhost kernel: [ 2350.723377] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.723395] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:10 localhost kernel: [ 2350.816609] r8169 0000:08:00.0: eth0: link down
Jul 21 04:25:10 localhost kernel: [ 2351.111777] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.128460] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.199920] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2351.263475] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2351.276859] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:25:10 localhost kernel: [ 2351.283960] ata2.00: configured for UDMA/100
Jul 21 04:25:10 localhost kernel: [ 2351.739942] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.129932] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.359839] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.784239] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.883229] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.883233] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:25:10 localhost kernel: [ 2352.941243] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2352.969919] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:25:10 localhost kernel: [ 2353.101249] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:25:10 localhost kernel: [ 2353.181194] ata1.00: configured for UDMA/133
Jul 21 04:25:10 localhost kernel: [ 2353.181463] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:25:10 localhost kernel: [ 2353.436737] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:25:10 localhost kernel: [ 2358.057138] PM: resume of devices complete after 7341.844 msecs
Jul 21 04:25:10 localhost kernel: [ 2358.057602] PM: Finishing wakeup.
Jul 21 04:25:10 localhost kernel: [ 2358.057604] Restarting tasks ... done.
Jul 21 04:25:10 localhost kernel: [ 2358.064234] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:25:11 localhost kernel: [ 2358.233575] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.272368] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.309721] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:11 localhost kernel: [ 2358.349601] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:25:13 localhost kernel: [ 2360.644416] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost kernel: [ 2360.648163] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client 1134[0:1000] has disconnected
Jul 21 04:25:13 localhost acpid: client connected from 1134[0:1000]
Jul 21 04:25:13 localhost acpid: 1 client rule loaded
Jul 21 04:25:26 localhost kernel: [ 2373.415894] NVRM: Xid (0000:01:00): 8, Channel 0000007e
Jul 21 04:25:26 localhost kernel: [ 2373.700350] hrtimer: interrupt took 91847280 ns
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.
Jul 21 04:28:36 localhost kernel: [ 2563.568752] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:28:36 localhost kernel: [ 2563.573610] EXT4-fs (sda8): re-mounted. Opts: commit=0

What does this message mean?
Jul 21 04:25:26 localhost kernel: [ 2373.700352] NVRM: GPU at 0000:01:00.0 has fallen off the bus.

What can i do to solve this?

Best regards,
Cedric

Last edited by cdwijs (2012-08-09 18:33:34)

Offline

#2 2012-07-21 10:00:37

cdwijs
Member
Registered: 2010-04-24
Posts: 289

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

I did a quick google search. This page suggested that I set my videocard in persistend mode:
http://scientificlinuxforum.org/index.p … topic=1469

So i did the following:

]# /usr/bin/nvidia-smi -pm 1
Enabled persistence mode for GPU 0000:01:00.0.
All done.
# /usr/bin/nvidia-smi -q

==============NVSMI LOG==============

Timestamp                       : Sat Jul 21 04:58:55 2012

Driver Version                  : 302.17

Attached GPUs                   : 1

GPU 0000:01:00.0
    Product Name                : GeForce 9600M GS
    Display Mode                : N/A
    Persistence Mode            : Enabled
    Driver Model
        Current                 : N/A
        Pending                 : N/A
    Serial Number               : N/A
    GPU UUID                    : N/A
    VBIOS Version               : 62.94.8D.00.0B
    Inforom Version
        OEM Object              : N/A
        ECC Object              : N/A
        Power Management Object : N/A
    PCI
        Bus                     : 0x01
        Device                  : 0x00
        Domain                  : 0x0000
        Device Id               : 0x064810DE
        Bus Id                  : 0000:01:00.0
        Sub System Id           : 0x02C01028
        GPU Link Info
            PCIe Generation
                Max             : N/A
                Current         : N/A
            Link Width
                Max             : N/A
                Current         : N/A
    Fan Speed                   : N/A
    Performance State           : N/A
    Memory Usage
        Total                   : 511 MB
        Used                    : 30 MB
        Free                    : 480 MB
    Compute Mode                : Default
    Utilization
        Gpu                     : N/A
        Memory                  : N/A
    Ecc Mode
        Current                 : N/A
        Pending                 : N/A
    ECC Errors
        Volatile
            Single Bit            
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Total           : N/A
            Double Bit            
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Total           : N/A
        Aggregate
            Single Bit            
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Total           : N/A
            Double Bit            
                Device Memory   : N/A
                Register File   : N/A
                L1 Cache        : N/A
                L2 Cache        : N/A
                Total           : N/A
    Temperature
        Gpu                     : 61 C
    Power Readings
        Power Management        : N/A
        Power Draw              : N/A
        Power Limit             : N/A
    Clocks
        Graphics                : N/A
        SM                      : N/A
        Memory                  : N/A
    Max Clocks
        Graphics                : N/A
        SM                      : N/A
        Memory                  : N/A
    Compute Processes           : Not Supported

This did not solve the issue. The laptop goes into suspend (the power LED starts blinking), but when the power button is then briefly pressed, the machine does power-up, but after hearing 2 clicks from the speaker, i get a black screen, a full-running CPU fan, and no reaction to numlock.

/var/log/everything.log:

Jul 21 04:30:13 localhost NetworkManager[565]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jul 21 04:50:40 localhost -- MARK --
Jul 21 04:54:46 localhost kernel: [ 1516.765698] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:54:46 localhost kernel: [ 1516.942964] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:02 localhost kernel: [ 1519.654895] PM: Syncing filesystems ... done.
Jul 21 04:55:02 localhost kernel: [ 1519.657049] PM: Preparing system for mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.657066] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.669943] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jul 21 04:55:02 localhost kernel: [ 1519.683296] PM: Entering mem sleep
Jul 21 04:55:02 localhost kernel: [ 1519.683337] Suspending console(s) (use no_console_suspend to debug)
Jul 21 04:55:02 localhost kernel: [ 1519.717139] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Jul 21 04:55:02 localhost kernel: [ 1519.749832] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1519.786781] sd 0:0:0:0: [sda] Stopping disk
Jul 21 04:55:02 localhost kernel: [ 1520.410064] PM: suspend of devices complete after 726.343 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410337] PM: late suspend of devices complete after 0.266 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.410678] r8169 0000:08:00.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.440024] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.476689] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.500023] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.516685] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.553353] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.576688] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603354] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.603426] PM: noirq suspend of devices complete after 193.085 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.603888] ACPI: Preparing to enter system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.693403] PM: Saving platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.694218] Disabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.796623] CPU 1 is now offline
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] ACPI: Low-level resume complete
Jul 21 04:55:02 localhost kernel: [ 1520.797088] PM: Restoring platform NVS memory
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1520.797088] Enabling non-boot CPUs ...
Jul 21 04:55:02 localhost kernel: [ 1520.803951] Booting Node 0 Processor 1 APIC 0x1
Jul 21 04:55:02 localhost kernel: [ 1520.815303] NMI watchdog: enabled, takes one hw-pmu counter.
Jul 21 04:55:02 localhost kernel: [ 1520.816608] CPU1 is up
Jul 21 04:55:02 localhost kernel: [ 1520.818293] ACPI: Waking up from system sleep state S3
Jul 21 04:55:02 localhost kernel: [ 1520.823322] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.829975] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.836638] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.853290] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.859971] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.866638] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.883290] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.885162] PM: noirq resume of devices complete after 66.681 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885372] PM: early resume of devices complete after 0.105 msecs
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885432] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885465] usb usb1: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885466] usb usb2: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885487] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885490] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885518] usb usb3: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885549] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885582] usb usb4: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885582] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
Jul 21 04:55:02 localhost kernel: [ 1520.885600] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885629] usb usb5: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885648] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885653] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885680] pci 0000:00:1e.0: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885679] usb usb6: root hub lost power or was reset
Jul 21 04:55:02 localhost kernel: [ 1520.885698] ata_piix 0000:00:1f.2: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885713] ata_piix 0000:00:1f.5: setting latency timer to 64
Jul 21 04:55:02 localhost kernel: [ 1520.885736] r8169 0000:08:00.0: wake-up capability disabled by ACPI
Jul 21 04:55:02 localhost kernel: [ 1520.890553] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.891048] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1520.960285] r8169 0000:08:00.0: eth0: link down
Jul 21 04:55:02 localhost kernel: [ 1521.281391] ata3: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.297666] ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.332377] Extended CMOS year: 2000
Jul 21 04:55:02 localhost kernel: [ 1521.376657] usb 2-1: reset low-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1521.406940] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1521.427670] ata2.00: configured for UDMA/100
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost acpid: client 1147[0:1000] has disconnected
Jul 21 04:55:02 localhost kernel: [ 1521.453328] firewire_core 0000:1a:00.0: rediscovered device fw0
Jul 21 04:55:02 localhost kernel: [ 1521.915219] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.303337] usb 8-2: reset high-speed USB device number 2 using ehci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.533339] usb 6-1: reset full-speed USB device number 2 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1522.955078] usb 6-1.1: reset full-speed USB device number 3 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.057065] btusb 6-1.1:1.0: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.057070] btusb 6-1.1:1.1: no reset_resume for driver btusb?
Jul 21 04:55:02 localhost kernel: [ 1523.113342] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 04:55:02 localhost kernel: [ 1523.115078] usb 6-1.2: reset full-speed USB device number 4 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.278082] usb 6-1.3: reset full-speed USB device number 5 using uhci_hcd
Jul 21 04:55:02 localhost kernel: [ 1523.321369] ata1.00: configured for UDMA/133
Jul 21 04:55:02 localhost kernel: [ 1523.321637] sd 0:0:0:0: [sda] Starting disk
Jul 21 04:55:02 localhost kernel: [ 1523.613501] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
Jul 21 04:55:02 localhost kernel: [ 1528.234017] PM: resume of devices complete after 7348.637 msecs
Jul 21 04:55:02 localhost kernel: [ 1528.234472] PM: Finishing wakeup.
Jul 21 04:55:02 localhost kernel: [ 1528.234474] Restarting tasks ... done.
Jul 21 04:55:02 localhost kernel: [ 1528.239320] video LNXVIDEO:00: Restoring backlight state
Jul 21 04:55:02 localhost acpid: client connected from 1147[0:1000]
Jul 21 04:55:02 localhost acpid: 1 client rule loaded
Jul 21 04:55:02 localhost kernel: [ 1528.396372] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.433245] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.469720] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:02 localhost kernel: [ 1528.506634] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
Jul 21 04:55:03 localhost kernel: [ 1530.007718] EXT4-fs (sda5): re-mounted. Opts: commit=0
Jul 21 04:55:04 localhost kernel: [ 1530.271879] EXT4-fs (sda8): re-mounted. Opts: commit=0
Jul 21 04:55:55 localhost kernel: [    0.000000] Initializing cgroup subsys cpuset
Jul 21 04:55:55 localhost kernel: [    0.000000] Initializing cgroup subsys cpu

Interestingly, the message that the GPU has fallen off the bus is no longer present. Something else is going on as well :-)

Best regards,
Cedric

Offline

#3 2012-07-21 12:15:53

x33a
Forum Fellow
Registered: 2009-08-15
Posts: 4,587

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

Try the 304.22 drivers from AUR. They have suspend related fixes.

Offline

#4 2012-07-22 10:15:49

cdwijs
Member
Registered: 2010-04-24
Posts: 289

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

Hi x33a,

I have make the package, but I can't install it. Pacman does not allow me to replace nvidia-utils by nvidia-utils-custom:

[root@cedric nvidia-utils-custom]# pacman -U ./nvidia-utils-custom-304.22-1-x86_64.pkg.tar.xz 
loading packages...
resolving dependencies...
looking for inter-conflicts...
:: nvidia-utils-custom and nvidia-utils are in conflict. Remove nvidia-utils? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: abuse: requires libgl
:: alienarena: requires libgl
:: libva: requires libgl
:: libwebkit3: requires libgl
:: mesa: requires libgl
:: mplayer: requires libgl
:: nvidia: requires nvidia-utils=302.17
:: qemu: requires libgl
:: qt: requires libgl
:: supertux: requires libgl
:: vdr-plugin-xineliboutput-git: requires libgl
:: xine-lib-1.2: requires libgl
:: xine-plugin-bluray-xineliboutput-git: requires libgl
:: xorg-xdriinfo: requires libgl
[root@cedric nvidia-utils-custom]#

How can I replace nvidia-utils by nvidia-utils-custom without removing and then reinstalling all the programs that depend on it?

Best regards,
Cedric

Offline

#5 2012-07-22 10:35:22

skunktrader
Member
From: Brisbane, Australia
Registered: 2010-02-14
Posts: 1,576

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

I think the key is 

:: nvidia: requires nvidia-utils=302.17

You probably need to build this to match your version of nvidia-utils and install the two packages together

Last edited by skunktrader (2012-07-22 10:43:09)

Offline

#6 2012-07-22 10:59:18

cdwijs
Member
Registered: 2010-04-24
Posts: 289

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

Building the package itself is not the problem.

The problem is that pacman does not allow me to remove my origional nvidia-utils, as I have a lot of programs that need that program to be installed.
Can I force pacman to remove the package? Or is this a very bad idea?

Best regards,
Cedric

Offline

#7 2012-07-23 04:24:12

x33a
Forum Fellow
Registered: 2009-08-15
Posts: 4,587

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

# pacman -Rdd nvidia-utils
# pacman -U ./nvidia-utils-custom-304.22-1-x86_64.pkg.tar.xz

then install nvidia too.

Offline

#8 2012-07-23 23:48:08

Leonid.I
Member
From: Aethyr
Registered: 2009-03-22
Posts: 999

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

x33a wrote:
# pacman -Rdd nvidia-utils
# pacman -U ./nvidia-utils-custom-304.22-1-x86_64.pkg.tar.xz

then install nvidia too.

Don't. This is wrong. Pacman is your friend, do not play against it.

The reason for a conflict is that AUR's nvidia-utils-custom PKGBUILD is broken. Compare it to extra/nvidia-utils, specifically to the "provides=()" entry...

Arch Linux is more than just GNU/Linux -- it's an adventure
pkill -9 systemd

Offline

#9 2012-07-24 05:00:51

x33a
Forum Fellow
Registered: 2009-08-15
Posts: 4,587

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

Leonid.I wrote:
x33a wrote:
# pacman -Rdd nvidia-utils
# pacman -U ./nvidia-utils-custom-304.22-1-x86_64.pkg.tar.xz

then install nvidia too.

Don't. This is wrong. Pacman is your friend, do not play against it.

The reason for a conflict is that AUR's nvidia-utils-custom PKGBUILD is broken. Compare it to extra/nvidia-utils, specifically to the "provides=()" entry...

Well, i don't know about that particular package. But, this is how nvidia-utils is removed, if we want to replace it with a custom package. If you have any other method, please elaborate.

Offline

#10 2012-07-24 15:22:22

Leonid.I
Member
From: Aethyr
Registered: 2009-03-22
Posts: 999

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

The issue is that various programs require libgl. The official nvidia-utils (302.17) provides() it. The onefire's version in AUR (304.22) provides() nvidia-utils, and not libgl. So the provides() array should be extended. Similarly, nvidia-utils-custom should conflict with libgl, like extra/nvidia-utils does, otherwise people updrading from nouveau+libgl will lose X11.

I don't use nvidia factory driver and don't care to correct the PKGBUILD. However, you guys should. The pacman call with -Rdd overrides dependency checks which are the primary pacman's job. The problem is not with pacman, but with crappy PKGBUILD.

AUR is 99% broken, so please don't use tools like yaourt -- they will break your system. Learn how packaging works and  always go through PKGBUILD line-by-line.

Last edited by Leonid.I (2012-07-24 15:24:31)

Arch Linux is more than just GNU/Linux -- it's an adventure
pkill -9 systemd

Offline

#11 2012-07-25 04:53:49

x33a
Forum Fellow
Registered: 2009-08-15
Posts: 4,587

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

I am using nvidia-utils-beta from AUR, and it provides 'libgl' and conflicts with 'libgl', and yet when installing it, i first had to remove the nvidia-utils package from extra using pacman -Rdd. This particular PKGBUILD might not be fine, but in my case the PKGBUILD was fine.

Offline

#12 2012-08-09 18:32:10

cdwijs
Member
Registered: 2010-04-24
Posts: 289

Re: [SOLVED]suspend fails NVRM: GPU at 0000:01:00.0 has fallen off the bus

I have updated my system today, it solved my problems. I can suspend this machine just fine now.

Thanks for your assistance.

Best regards,
Cedric

Offline

Pages: 1

Board footer

Powered by FluxBB