[SOLVED] System freezes on reboot

donniezazen · 2012-07-18 22:33:28

Hello,

For past day or so, my system would freeze on reboot. It doesn't show any error. Here is dmesg log and failed errors.

I blacklisted e1000e as suggested by Thinkpad T420 wiki but it didn't work. I am not sure what to look into.

 dmesg | grep failed
[    0.329410]  pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[    0.493261] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    0.493916] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed

uname -a
Linux arch 3.3.7-1-ck #1 SMP PREEMPT Mon Jul 16 02:08:22 MDT 2012 x86_64 GNU/Linux

kernel /vmlinuz-linux-ck root=/dev/sda5 ro quite splash elevator=bfq i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.vblankoffdelay=1

Thanks.

Last edited by donniezazen (2012-07-19 02:58:20)

masteryod · 2012-07-18 22:48:09

Did you tried booting stock official kernel? Did you tried without additional boot options?

Also 3.3.7 is kinda outdated, what's the reason for that? When was the last time you ran pacman -Syu?

Last edited by masteryod (2012-07-18 22:49:42)

donniezazen · 2012-07-18 23:29:57

I have to use pre-3.4 kernel because of recent regression in 3.4-3.5rc7 which increases system temp by 10C and doubles power usage to 20W. I am basically stuck with 3.3 for long time.

My system is fully updated otherwise.

I can try ck without boot options and stock with and without boot options. I have been using these options for about a year without any problems on both ck and stock.

I am also trying https://bbs.archlinux.org/viewtopic.php … 9#p1052099 if it helps.

Thanks.

Last edited by donniezazen (2012-07-18 23:40:25)

donniezazen · 2012-07-19 02:57:58

Plymouth was the culprit. I removed it from kernel boot line and I am able to reboot and shutdown again.

masteryod · 2012-07-19 10:13:19

Glad to hear your problem has been solved.

Last edited by masteryod (2012-07-19 10:15:03)

graysky · 2012-07-22 17:57:39

@op - I have similar message in my dmesg:

$ dmesg | grep -i fail
[    0.899895] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    2.020687] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.020690] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880409f823c0), AE_NOT_FOUND (20120320/psparse-536)
[    2.020715] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.020719] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880409f82348), AE_NOT_FOUND (20120320/psparse-536)
[    2.021086] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.021089] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880409f825a0), AE_NOT_FOUND (20120320/psparse-536)
[    2.021281] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.021284] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880409f82348), AE_NOT_FOUND (20120320/psparse-536)
[    2.021467] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.021469] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880409f823c0), AE_NOT_FOUND (20120320/psparse-536)
[    2.021744] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.021748] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409f824b0), AE_NOT_FOUND (20120320/psparse-536)
[    2.023661] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.023664] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff880409f824b0), AE_NOT_FOUND (20120320/psparse-536)
[    2.060485] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[    2.060488] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff880409f825a0), AE_NOT_FOUND (20120320/psparse-536)

No idea what Plymouth is but I'm guessing I don't have it on my system. Can you clarify?

donniezazen · 2012-07-22 19:32:21

Plymouth is just a theme for boot process, so that, you don't have to see commands. It shows you, for example, Arch Linux logo and booting goes in behind. I am pretty sure you don't have it in your system.

Mux Info Call is innocuous error caused by Nvidia cards. I am not sure by ACPI errors.

Last edited by donniezazen (2012-07-22 19:32:54)

Arch Linux

#1 2012-07-18 22:33:28

[SOLVED] System freezes on reboot

#2 2012-07-18 22:48:09

Re: [SOLVED] System freezes on reboot

#3 2012-07-18 23:29:57

Re: [SOLVED] System freezes on reboot

#4 2012-07-19 02:57:58

Re: [SOLVED] System freezes on reboot

#5 2012-07-19 10:13:19

Re: [SOLVED] System freezes on reboot

#6 2012-07-22 17:57:39

Re: [SOLVED] System freezes on reboot

#7 2012-07-22 19:32:21

Re: [SOLVED] System freezes on reboot

Board footer