You are not logged in.

#4201 2012-07-24 19:00:28

Wilco
Member
Registered: 2008-11-09
Posts: 431

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:
Wilco wrote:

How is the stability of the current driver? I tried the 2012.02 or 03 version (can't remember) and it worked pretty well back then. I'm wondering if this driver is still good. Does the driver support the 3.5 kernel btw?

12.6 isn't as fast in compositing as 12.4 (ie. on KDE if you will open couple of windows with vbox and video player - you will see a nice lag when switching through desktops), but it supports xserver 1.12.
KDE 4.9 rc2 seems to be faster than it's predecessors, and fglrx 12.6 is working pretty nice and fast with it but still not as fast as 12.4.
Personally i don't have problems with stability.
Both 12.4 and 12.6 supports 3.5 kernel through patches.
Just pick up right packages/right repo because we now have more catalyst drivers (stable and legacy) - look at arch's catalyst wiki page.

And as for your question "is it stil good?"... umm... 12.6 seems to be some kind of beta driver for me - i think that problems with compositing' speed occured because amd is working on kde's direct rendering and better support for gnome3 (which are better), so as always in developement - functionality is comming in first place and then they should work on optimization. The question is when the driver will be as fast as it was before - i dunno, maybe upcoming august's release will be better.
btw: 12.6 seems to be faster on games/apps

Thanks Vi0L0, excellent feedback. I don't use compositing, so as long as the driver supports xserver 1.12, hardware video decoding and is stable it's good enough for me.

Offline

#4202 2012-07-24 21:40:25

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,300
Website

Re: The AMD/ATI Bar & Grill

Roken wrote:

No problem. Perhaps a simple check to see if /usr/lib/modules/extramodules-$kernel-version/fglrx.ko.gz exists and if so, simply delete it before installing rebuilt modules (it only prevents the installation, not the build), and as I said, no ill effects here from deleting and then re-running catalyst-build-module, so it shouldn't cause any problems.

Naah, i don't like to manually remove files that belongs to a package, and it's imposible to run pacman -R while updating package...
Besides what if it will remove working fglrx module and then for some reason it won't build new one correctly? some catalyst-{kernver} package would stay then incomplete.
Nah, dirty, i don't like it, let user decide and do whatever (s)he wants.


BTW:
I've updated [catalyst] repo and AUR' -daemon -generator -hook -total(*AUR only) with new ati_make.sh script (this script is preparing make variables like ie SMP support), so those packages don't need any /lib anymore (previous ati_make.sh was checking inside /lib only, not /usr/lib).
BUT i don't have time to update those packages in [catalyst-hd234k] and [catalyst-hd234k-12.4] repos, i will do this as soon as i can but guess i won't find time until friday, sorry - anyway the update is not a "must have", as /lib symlink should stay on our systems for some time.

Last edited by Vi0L0 (2012-07-24 21:52:10)

Offline

#4203 2012-07-26 15:14:11

frumble
Member
From: Germany
Registered: 2012-05-20
Posts: 75
Website

Re: The AMD/ATI Bar & Grill

@Vi0L0 @Alucryd:
No luck with X-Server 1.11 and Catalyst 12.6 on Linux 3.4.6 with Radeon HD 7770. The same black screen with white cursor. ;(

Offline

#4204 2012-07-30 07:49:25

grimsbain
Member
From: South Dakota
Registered: 2011-11-01
Posts: 10

Re: The AMD/ATI Bar & Grill

nobody44 wrote:

Hello,
I have an issue with my notebook and the catalyst-driver. The notebook has an Ati Radeon HD4200 graphics card and I am trying to use the catalyst-hd234k legacy driver, without any success.
Installed packages:
- newest kernel 3.4.5-1
- newest Xorg-Server 1.12.3-1

What I have done:
- blacklisted radeon in /etc/modprobe.d/blacklist.conf
- loaded fglrx in rc.conf (lsmod says it is loaded)
- generated new xorg.conf with "aticonfig --initial"
- added nomodeset to boot kernel line
- tryed both: catalyst-hd234k-repository and my own compiled catalyst-hd234k-total-package (from AUR)

The result is a black X-Screen (I use the lxdm login manager, but I get the black X-Screen with a manual startx-command too). I can't even switch with the alt-ctrl-f** combinations to another terminal. I can't see any errors and the logs are nearly empty (Xorg.log.0 warnings):

...
Falling back to old probe method for fglrx
...
No matching Device section for instance (BusID PCI:0@0:xx:y) found (there are about 15 of them)
...
Module "ddc" already built-in (it is the last entry, this one is not a warning)

Nearly empty means, that "grep EE Xorg.log.0" finds only the standard lines.
lspci says, that my graphics card has been detected correctly (it's BusID doesn't appear in the "No matching Device section"-errors).
I wouldn't mind using the open source driver, but it's a notebook and the open source driver does not use all the power saving mechanics (or I am configuring it wrong...).
Do you have any idea, what this is?

And sorry for my bad english... it's not my native language :-/...

nobody44

I'm having the exact same problem on the same hardware. I have looked in the logs, but can't see any obvious errors. I have read everything on the wiki and done every step several times and nothing changes.

[     9.399] 
X.Org X Server 1.12.3
Release Date: 2012-07-09
[     9.399] X Protocol Version 11, Revision 0
[     9.399] Build Operating System: Linux 3.4.4-3-ARCH x86_64 
[     9.399] Current Operating System: Linux thomas-laptop 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
[     9.399] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9fb3348b-11ea-4d65-ab96-c7e7a3ad24f8 ro init=/bin/systemd resume=/dev/sda5 nomodeset quiet
[     9.399] Build Date: 09 July 2012  03:59:39PM
[     9.399]  
[     9.399] Current version of pixman: 0.26.2
[     9.399] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     9.399] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.399] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 01:11:35 2012
[     9.441] (==) Using config file: "/etc/X11/xorg.conf"
[     9.441] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     9.460] (==) ServerLayout "aticonfig Layout"
[     9.460] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[     9.460] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[     9.482] (**) |   |-->Device "aticonfig-Device[0]-0"
[     9.482] (==) Automatically adding devices
[     9.482] (==) Automatically enabling devices
[     9.525] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     9.525] 	Entry deleted from font path.
[     9.545] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     9.545] 	Entry deleted from font path.
[     9.545] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     9.545] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     9.545] 	Entry deleted from font path.
[     9.545] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     9.545] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     9.545] (==) ModulePath set to "/usr/lib/xorg/modules"
[     9.545] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.545] (II) Loader magic: 0x7c8b00
[     9.545] (II) Module ABI versions:
[     9.545] 	X.Org ANSI C Emulation: 0.4
[     9.545] 	X.Org Video Driver: 12.0
[     9.545] 	X.Org XInput driver : 16.0
[     9.545] 	X.Org Server Extension : 6.0
[     9.546] (--) PCI:*(0:1:5:0) 1002:9712:103c:1444 rev 0, Mem @ 0xc0000000/268435456, 0xd0300000/65536, 0xd0200000/1048576, I/O @ 0x00003000/256
[     9.546] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     9.546] (II) "extmod" will be loaded by default.
[     9.546] (II) "dbe" will be loaded by default.
[     9.546] (II) "glx" will be loaded by default.
[     9.546] (II) "record" will be loaded by default.
[     9.546] (II) "dri" will be loaded by default.
[     9.546] (II) "dri2" will be loaded by default.
[     9.546] (II) LoadModule: "extmod"
[     9.576] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[     9.584] (II) Module extmod: vendor="X.Org Foundation"
[     9.584] 	compiled for 1.12.3, module version = 1.0.0
[     9.584] 	Module class: X.Org Server Extension
[     9.584] 	ABI class: X.Org Server Extension, version 6.0
[     9.584] (II) Loading extension MIT-SCREEN-SAVER
[     9.584] (II) Loading extension XFree86-VidModeExtension
[     9.584] (II) Loading extension XFree86-DGA
[     9.584] (II) Loading extension DPMS
[     9.584] (II) Loading extension XVideo
[     9.584] (II) Loading extension XVideo-MotionCompensation
[     9.584] (II) Loading extension X-Resource
[     9.584] (II) LoadModule: "dbe"
[     9.584] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[     9.585] (II) Module dbe: vendor="X.Org Foundation"
[     9.585] 	compiled for 1.12.3, module version = 1.0.0
[     9.585] 	Module class: X.Org Server Extension
[     9.585] 	ABI class: X.Org Server Extension, version 6.0
[     9.585] (II) Loading extension DOUBLE-BUFFER
[     9.585] (II) LoadModule: "glx"
[     9.585] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     9.627] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[     9.627] 	compiled for 6.9.0, module version = 1.0.0
[     9.628] (II) Loading extension GLX
[     9.628] (II) LoadModule: "record"
[     9.628] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[     9.629] (II) Module record: vendor="X.Org Foundation"
[     9.629] 	compiled for 1.12.3, module version = 1.13.0
[     9.629] 	Module class: X.Org Server Extension
[     9.629] 	ABI class: X.Org Server Extension, version 6.0
[     9.629] (II) Loading extension RECORD
[     9.629] (II) LoadModule: "dri"
[     9.629] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[     9.686] (II) Module dri: vendor="X.Org Foundation"
[     9.686] 	compiled for 1.12.3, module version = 1.0.0
[     9.686] 	ABI class: X.Org Server Extension, version 6.0
[     9.686] (II) Loading extension XFree86-DRI
[     9.686] (II) LoadModule: "dri2"
[     9.686] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[     9.692] (II) Module dri2: vendor="X.Org Foundation"
[     9.692] 	compiled for 1.12.3, module version = 1.2.0
[     9.692] 	ABI class: X.Org Server Extension, version 6.0
[     9.693] (II) Loading extension DRI2
[     9.693] (II) LoadModule: "fglrx"
[     9.693] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    10.437] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    10.437] 	compiled for 1.4.99.906, module version = 8.97.2
[    10.437] 	Module class: X.Org Video Driver
[    10.448] (II) Loading sub module "fglrxdrm"
[    10.448] (II) LoadModule: "fglrxdrm"
[    10.448] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    10.473] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    10.473] 	compiled for 1.4.99.906, module version = 8.97.2
[    10.473] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    10.473] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3               
[    10.473] (II) ATI Proprietary Linux Driver Build Date: Jul  3 2012 23:56:30
[    10.473] (++) using VT number 7

[    10.645] (WW) Falling back to old probe method for fglrx
[    10.710] (II) PCS database file /etc/ati/amdpcsdb not found
[    10.710] (II)   Creating PCS database from initial defaults instead
[    10.723] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[    10.724] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[    10.725] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    10.743] (II) AMD Video driver is signed
[    10.743] (II) fglrx(0): pEnt->device->identifier=0x174cbc0
[    10.743] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    10.743] (II) Loading sub module "vgahw"
[    10.744] (II) LoadModule: "vgahw"
[    10.744] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    10.758] (II) Module vgahw: vendor="X.Org Foundation"
[    10.758] 	compiled for 1.12.3, module version = 0.1.0
[    10.759] 	ABI class: X.Org Video Driver, version 12.0
[    10.759] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    10.759] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    10.759] (==) fglrx(0): Default visual is TrueColor
[    10.759] (**) fglrx(0): Option "DPMS" "true"
[    10.759] (==) fglrx(0): RGB weight 888
[    10.759] (II) fglrx(0): Using 8 bits per RGB 
[    10.759] (==) fglrx(0): Buffer Tiling is ON
[    10.760] (II) Loading sub module "fglrxdrm"
[    10.760] (II) LoadModule: "fglrxdrm"
[    10.760] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    10.760] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    10.760] 	compiled for 1.4.99.906, module version = 8.97.2
[    10.773] ukiDynamicMajor: found major device number 252
[    10.774] ukiDynamicMajor: found major device number 252
[    10.774] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[    10.774] ukiOpenDevice: node name is /dev/ati/card0
[    10.774] ukiOpenDevice: open result is 11, (OK)
[    10.774] ukiOpenByBusid: ukiOpenMinor returns 11
[    10.774] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[    10.774] (**) fglrx(0): NoAccel = NO
[    10.774] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    10.774] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[    10.774] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1444)
[    10.774] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    10.774] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    10.774] (--) fglrx(0): MMIO registers at 0xd0300000
[    10.774] (--) fglrx(0): I/O port at 0x00003000
[    10.774] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    10.789] (II) fglrx(0): ATIF platform detected
[    10.790] (II) fglrx(0): AC Adapter is used
[    10.815] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    10.816] (II) Loading sub module "vbe"
[    10.816] (II) LoadModule: "vbe"
[    10.816] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    10.824] (II) Module vbe: vendor="X.Org Foundation"
[    10.824] 	compiled for 1.12.3, module version = 1.1.0
[    10.824] 	ABI class: X.Org Video Driver, version 12.0
[    10.825] (II) fglrx(0): VESA BIOS detected
[    10.825] (II) fglrx(0): VESA VBE Version 3.0
[    10.825] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    10.825] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    10.826] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[    10.826] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    10.826] (II) fglrx(0): VESA VBE OEM Product: RS880M
[    10.826] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    10.840] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    10.840] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[    10.840] (II) fglrx(0): PCIE card detected
[    10.841] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    10.841] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    10.842] (II) fglrx(0): Using adapter: 1:5.0.
[    10.851] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[    10.870] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[    10.871] (II) fglrx(0): RandR 1.2 support is enabled!
[    10.871] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    10.871] (==) fglrx(0): Center Mode is disabled 
[    10.871] (II) Loading sub module "fb"
[    10.871] (II) LoadModule: "fb"
[    10.888] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.889] (II) Module fb: vendor="X.Org Foundation"
[    10.889] 	compiled for 1.12.3, module version = 1.0.0
[    10.889] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    10.889] (II) Loading sub module "ddc"
[    10.889] (II) LoadModule: "ddc"
[    10.889] (II) Module "ddc" already built-in

-Thomas aka Grimsbain

Offline

#4205 2012-07-30 08:59:05

PhotonX
Member
From: Munich
Registered: 2008-08-10
Posts: 430

Re: The AMD/ATI Bar & Grill

- loaded fglrx in rc.conf (lsmod says it is loaded)

I think, you don't need to do this.  Maybe that's the cause of the problem?


Desktop: http://www.sysprofile.de/id15562, Arch Linux    |    Notebook: Thinkpad X200 Tablet, Manjaro

The very worst thing you can do with free software is to download it, see that it doesn't work for some reason, leave it, and tell your friends that it doesn't work.  -  Tuomas Lukka

Offline

#4206 2012-07-30 09:43:30

redada
Member
From: Stuttgart
Registered: 2009-06-25
Posts: 14

Re: The AMD/ATI Bar & Grill

Exactly the same here on my Lenovo Thinkpad Edge 13 (Radeon HD4200).

Still the same error, even with fglrx not loaded in rc.conf.

Any further ideas?

Offline

#4207 2012-07-30 10:55:57

PhotonX
Member
From: Munich
Registered: 2008-08-10
Posts: 430

Re: The AMD/ATI Bar & Grill

Hmm, what does fglrxinfo report?


Desktop: http://www.sysprofile.de/id15562, Arch Linux    |    Notebook: Thinkpad X200 Tablet, Manjaro

The very worst thing you can do with free software is to download it, see that it doesn't work for some reason, leave it, and tell your friends that it doesn't work.  -  Tuomas Lukka

Offline

#4208 2012-07-30 12:23:51

grimsbain
Member
From: South Dakota
Registered: 2011-11-01
Posts: 10

Re: The AMD/ATI Bar & Grill

I'm running a fresh install of Arch with Gnome 3 (systemd is installed). The open source drivers (xf86-video-ati) work fine, but I wanted to see if I could get 12.6 installed.

Here is exactly what I have been doing.

1.) Install catalyst-total-hd234k from AUR w/ yaourt.
2.) aticonfig --initial
3.) Blacklist radeon and radeonhd in /etc/modprobe.d/modprobe.conf
4.) Add fglrx to the module section of /etc/mkinitcpio.conf
5.) Run mkinitcpio -p linux (Does show fglrx in the build info.)
6.) Edit /etc/default/grub to add nomodeset to the kernel command line.
7.) Run grub-mkconfig -o /boot/grub/grub.cfg

I do not have radeon or fglrx listed in /etc/rc.conf.

Here is my xorg.conf (Unchanged aticonfig output.)

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:5:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Fglrxinfo is no help because I can only get to it if I restore my xorg.conf (to nothing) or if I add acpi=off to the kernel command line and that kills 2d/3d acceleration.


-Thomas aka Grimsbain

Offline

#4209 2012-07-30 18:48:32

Roken
Member
From: UK
Registered: 2012-01-16
Posts: 653

Re: The AMD/ATI Bar & Grill

have you added "nomodeset" to your kernel command line?


[img=Speedtest]http://www.speedtest.net/my-result/5145583518[/img]

Nvidia GTX 670 2Gb, AMD Phenom II X4 (965BE) @ 3.6 Ghz (Overclocked) 8GB RAM
Linux user #545703

Offline

#4210 2012-07-30 18:58:52

grimsbain
Member
From: South Dakota
Registered: 2011-11-01
Posts: 10

Re: The AMD/ATI Bar & Grill

Roken wrote:

have you added "nomodeset" to your kernel command line?

Yes, see step 6 of my last post.


-Thomas aka Grimsbain

Offline

#4211 2012-07-30 19:18:41

Roken
Member
From: UK
Registered: 2012-01-16
Posts: 653

Re: The AMD/ATI Bar & Grill

Ahh, sorry - I missed that. Your xorg.conf looks fine (compared with mine) though it may be worth checking that it picked up the correct bus ID

lspci | grep VGA

[img=Speedtest]http://www.speedtest.net/my-result/5145583518[/img]

Nvidia GTX 670 2Gb, AMD Phenom II X4 (965BE) @ 3.6 Ghz (Overclocked) 8GB RAM
Linux user #545703

Offline

#4212 2012-07-30 20:21:51

grimsbain
Member
From: South Dakota
Registered: 2011-11-01
Posts: 10

Re: The AMD/ATI Bar & Grill

01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series]

Is what I get back so unless the xorg.conf needs the zero with the 5 it should be ok.

Last edited by grimsbain (2012-07-30 20:32:45)


-Thomas aka Grimsbain

Offline

#4213 2012-07-30 21:30:49

ChemBro
Member
Registered: 2008-10-22
Posts: 673

Re: The AMD/ATI Bar & Grill

Did you blacklist radeonfb?

Offline

#4214 2012-07-30 22:26:48

grimsbain
Member
From: South Dakota
Registered: 2011-11-01
Posts: 10

Re: The AMD/ATI Bar & Grill

ChemBro wrote:

Did you blacklist radeonfb?

Nope, just tried it after reading your post and nothing changed.


-Thomas aka Grimsbain

Offline

#4215 2012-07-30 23:29:00

windscape
Member
Registered: 2010-04-30
Posts: 69

Re: The AMD/ATI Bar & Grill

@grimsbain

The output of dmesg and the contents of /var/log/Xorg.0.log will probably help to pinpoint the issue.

Offline

#4216 2012-07-31 00:47:19

grimsbain
Member
From: South Dakota
Registered: 2011-11-01
Posts: 10

Re: The AMD/ATI Bar & Grill

windscape wrote:

@grimsbain

The output of dmesg and the contents of /var/log/Xorg.0.log will probably help to pinpoint the issue.

I reinstalled and got what you were looking for.

Dmesg Output

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9fb3348b-11ea-4d65-ab96-c7e7a3ad24f8 ro init=/bin/systemd resume=/dev/sda5 nomodeset quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000ae44a000 (usable)
[    0.000000]  BIOS-e820: 00000000ae44a000 - 00000000ae64a000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000ae64a000 - 00000000afd3f000 (usable)
[    0.000000]  BIOS-e820: 00000000afd3f000 - 00000000afdbf000 (reserved)
[    0.000000]  BIOS-e820: 00000000afdbf000 - 00000000afebf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000afebf000 - 00000000afef6000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000afef6000 - 00000000aff00000 (usable)
[    0.000000]  BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Hewlett-Packard Presario CQ62 Notebook PC/1444, BIOS F.29 04/07/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xaff00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFE0000000 write-back
[    0.000000]   2 base 0000A0000000 mask FFFFF0000000 write-back
[    0.000000]   3 base 0000FFE00000 mask FFFFFFE00000 write-protect
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000aff00000
[    0.000000]  0000000000 - 0080000000 page 1G
[    0.000000]  0080000000 - 00afe00000 page 2M
[    0.000000]  00afe00000 - 00aff00000 page 4k
[    0.000000] kernel direct mapping tables up to aff00000 @ 1fffd000-20000000
[    0.000000] RAMDISK: 37856000 - 37c23000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 00000000afef5120 0005C (v01 HPQOEM SLIC-MPC 00000003      01000013)
[    0.000000] ACPI: FACP 00000000afef4000 000F4 (v04 HP     1444     00000003 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000afee2000 0E1CE (v01 HP     1444     F0000000 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000afe9b000 00040
[    0.000000] ACPI: HPET 00000000afef3000 00038 (v01 HP     1444     00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000afef2000 00084 (v02 HP     1444     00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000afef1000 0003C (v01 HP     1444     00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 00000000afee1000 00028 (v01 HP     1444     00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000afee0000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000afedf000 00386 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000aff00000
[    0.000000] Initmem setup node 0 0000000000000000-00000000aff00000
[    0.000000]   NODE_DATA [00000000afefc000 - 00000000afefffff]
[    0.000000]  [ffffea0000000000-ffffea0002bfffff] PMD -> [ffff8800ab800000-ffff8800ae3fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000ae44a
[    0.000000]     0: 0x000ae64a -> 0x000afd3f
[    0.000000]     0: 0x000afef6 -> 0x000aff00
[    0.000000] On node 0 totalpages: 719576
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3914 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11196 pages used for memmap
[    0.000000]   DMA32 zone: 704397 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000ae44a000 - 00000000ae64a000
[    0.000000] PM: Registered nosave memory: 00000000afd3f000 - 00000000afdbf000
[    0.000000] PM: Registered nosave memory: 00000000afdbf000 - 00000000afebf000
[    0.000000] PM: Registered nosave memory: 00000000afebf000 - 00000000afef6000
[    0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:47100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800afa00000 s82880 r8192 d23616 u524288
[    0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 708311
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9fb3348b-11ea-4d65-ab96-c7e7a3ad24f8 ro init=/bin/systemd resume=/dev/sda5 nomodeset quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 4082000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 2817716k/2882560k available (4538k kernel code, 4256k absent, 60588k reserved, 4307k data, 740k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 11534336 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.003333] Detected 2094.785 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.13 BogoMIPS (lpj=6982616)
[    0.000008] pid_max: default: 32768 minimum: 301
[    0.000037] Security Framework initialized
[    0.000042] AppArmor: AppArmor disabled by boot time parameter
[    0.000362] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001898] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002622] Mount-cache hash table entries: 256
[    0.002848] Initializing cgroup subsys cpuacct
[    0.002851] Initializing cgroup subsys memory
[    0.002860] Initializing cgroup subsys devices
[    0.002863] Initializing cgroup subsys freezer
[    0.002865] Initializing cgroup subsys net_cls
[    0.002867] Initializing cgroup subsys blkio
[    0.002895] tseg: 00aff00000
[    0.002897] CPU: Physical Processor ID: 0
[    0.002899] CPU: Processor Core ID: 0
[    0.002902] mce: CPU supports 6 MCE banks
[    0.002908] LVT offset 0 assigned for vector 0xf9
[    0.002914] using AMD E400 aware idle routine
[    0.003723] ACPI: Core revision 20120320
[    0.011177] ftrace: allocating 17828 entries in 70 pages
[    0.022008] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054959] CPU0: AMD Athlon(tm) II P320 Dual-Core Processor stepping 03
[    0.159557] Performance Events: AMD PMU driver.
[    0.159563] ... version:                0
[    0.159564] ... bit width:              48
[    0.159566] ... generic registers:      4
[    0.159568] ... value mask:             0000ffffffffffff
[    0.159570] ... max period:             00007fffffffffff
[    0.159571] ... fixed-purpose events:   0
[    0.159573] ... event mask:             000000000000000f
[    0.159616] System has AMD C1E enabled
[    0.159659] Switch to broadcast mode on CPU0
[    0.179730] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.199671] Booting Node   0, Processors  #1
[    0.212840] NMI watchdog: enabled, takes one hw-pmu counter.
[    0.212861] Switch to broadcast mode on CPU1
[    0.212874] Brought up 2 CPUs
[    0.212877] Total of 2 processors activated (8382.27 BogoMIPS).
[    0.213550] devtmpfs: initialized
[    0.215085] PM: Registering ACPI NVS region [mem 0xae44a000-0xae649fff] (2097152 bytes)
[    0.215119] PM: Registering ACPI NVS region [mem 0xafdbf000-0xafebefff] (1048576 bytes)
[    0.215925] NET: Registered protocol family 16
[    0.216044] node 0 link 0: io port [0, ffffff]
[    0.216048] TOM: 00000000c0000000 aka 3072M
[    0.216051] Fam 10h mmconf [mem 0xf7000000-0xf7ffffff]
[    0.216054] node 0 link 0: mmio [a0000, bffff]
[    0.216057] node 0 link 0: mmio [c0000000, cfffffff]
[    0.216060] node 0 link 0: mmio [d0000000, d01fffff]
[    0.216062] node 0 link 0: mmio [d0200000, d03fffff]
[    0.216065] node 0 link 0: mmio [d0400000, f6ffffff]
[    0.216067] node 0 link 0: mmio [f7000000, f7ffffff] ==> none
[    0.216070] node 0 link 0: mmio [f8000000, ffdfffff]
[    0.216073] bus: [00, 1f] on node 0 link 0
[    0.216075] bus: 00 index 0 [io  0x0000-0xffff]
[    0.216078] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.216080] bus: 00 index 2 [mem 0xc0000000-0xf6ffffff]
[    0.216082] bus: 00 index 3 [mem 0xf8000000-0xfcffffffff]
[    0.216186] ACPI: bus type pci registered
[    0.216303] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
[    0.216306] PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
[    0.218039] PCI: Using configuration type 1 for base access
[    0.218174] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.218176] mtrr: probably your BIOS does not setup all CPUs.
[    0.218177] mtrr: corrected configuration.
[    0.218653] bio: create slab <bio-0> at 0
[    0.218836] ACPI: Added _OSI(Module Device)
[    0.218840] ACPI: Added _OSI(Processor Device)
[    0.218841] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218843] ACPI: Added _OSI(Processor Aggregator Device)
[    0.220313] ACPI: EC: Look up EC in DSDT
[    0.221871] ACPI: Executed 1 blocks of module-level executable AML code
[    0.224251] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.229033] ACPI: Interpreter enabled
[    0.229040] ACPI: (supports S0 S3 S4 S5)
[    0.229076] ACPI: Using IOAPIC for interrupt routing
[    0.234360] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
[    0.234522] ACPI: No dock devices found.
[    0.234527] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.235294] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.235970] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.235973] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.235976] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.235978] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.235981] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.235984] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.235986] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.235989] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.235992] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.235994] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.235997] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.236000] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.236002] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.236005] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.236007] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.236010] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xf6ffffff]
[    0.236013] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfed3ffff]
[    0.236016] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
[    0.236023] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[    0.236061] PCI host bridge to bus 0000:00
[    0.236064] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.236067] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.236069] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.236072] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.236075] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.236077] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.236080] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.236082] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.236085] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.236088] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.236090] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.236093] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.236095] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.236098] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.236100] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xf6ffffff]
[    0.236103] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfed3ffff]
[    0.236106] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
[    0.236119] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
[    0.236175] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[    0.236233] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
[    0.236270] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.236287] pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
[    0.236324] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.236356] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.236375] pci 0000:00:11.0: reg 10: [io  0x4038-0x403f]
[    0.236385] pci 0000:00:11.0: reg 14: [io  0x404c-0x404f]
[    0.236395] pci 0000:00:11.0: reg 18: [io  0x4030-0x4037]
[    0.236404] pci 0000:00:11.0: reg 1c: [io  0x4048-0x404b]
[    0.236414] pci 0000:00:11.0: reg 20: [io  0x4010-0x401f]
[    0.236424] pci 0000:00:11.0: reg 24: [mem 0xd0408000-0xd04083ff]
[    0.236482] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.236495] pci 0000:00:12.0: reg 10: [mem 0xd0407000-0xd0407fff]
[    0.236566] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.237699] pci 0000:00:12.2: reg 10: [mem 0xd0408600-0xd04086ff]
[    0.244400] pci 0000:00:12.2: supports D1 D2
[    0.244403] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.244426] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.244439] pci 0000:00:13.0: reg 10: [mem 0xd0406000-0xd0406fff]
[    0.244509] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.245632] pci 0000:00:13.2: reg 10: [mem 0xd0408500-0xd04085ff]
[    0.252286] pci 0000:00:13.2: supports D1 D2
[    0.252288] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.252311] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.252387] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.252408] pci 0000:00:14.2: reg 10: [mem 0xd0400000-0xd0403fff 64bit]
[    0.252473] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.252488] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.252562] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.252603] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.252616] pci 0000:00:14.5: reg 10: [mem 0xd0405000-0xd0405fff]
[    0.252684] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.252697] pci 0000:00:16.0: reg 10: [mem 0xd0404000-0xd0404fff]
[    0.252767] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.253895] pci 0000:00:16.2: reg 10: [mem 0xd0408400-0xd04084ff]
[    0.260547] pci 0000:00:16.2: supports D1 D2
[    0.260549] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.260571] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.260590] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.260605] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.260620] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.260638] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.260718] pci 0000:01:05.0: [1002:9712] type 00 class 0x030000
[    0.260728] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.260733] pci 0000:01:05.0: reg 14: [io  0x3000-0x30ff]
[    0.260738] pci 0000:01:05.0: reg 18: [mem 0xd0300000-0xd030ffff]
[    0.260750] pci 0000:01:05.0: reg 24: [mem 0xd0200000-0xd02fffff]
[    0.260768] pci 0000:01:05.0: supports D1 D2
[    0.260837] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.260841] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.260844] pci 0000:00:01.0:   bridge window [mem 0xd0200000-0xd03fffff]
[    0.260849] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.260893] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[    0.260911] pci 0000:02:00.0: reg 10: [mem 0xd0100000-0xd010ffff 64bit]
[    0.260990] pci 0000:02:00.0: supports D1
[    0.260992] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.269548] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.269557] pci 0000:00:05.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.269629] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.269645] pci 0000:03:00.0: reg 10: [io  0x2000-0x20ff]
[    0.269667] pci 0000:03:00.0: reg 18: [mem 0xd0010000-0xd0010fff 64bit pref]
[    0.269682] pci 0000:03:00.0: reg 20: [mem 0xd0000000-0xd000ffff 64bit pref]
[    0.269692] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.269745] pci 0000:03:00.0: supports D1 D2
[    0.269747] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.279554] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[    0.279562] pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]
[    0.279567] pci 0000:00:06.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.279631] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[    0.279641] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.279644] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.279647] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.279649] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.279652] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.279655] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.279658] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.279661] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.279663] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.279666] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.279669] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.279672] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.279674] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.279677] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.279680] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xf6ffffff] (subtractive decode)
[    0.279683] pci 0000:00:14.4:   bridge window [mem 0xf8000000-0xfed3ffff] (subtractive decode)
[    0.279686] pci 0000:00:14.4:   bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
[    0.279706] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.279908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    0.279950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    0.279993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[    0.280064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.280128]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.280132]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.280134] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.284838] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.284901] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.284961] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.285018] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.285063] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.285099] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.285134] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.285169] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
[    0.285308] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.285311] vgaarb: loaded
[    0.285313] vgaarb: bridge control possible 0000:01:05.0
[    0.285364] PCI: Using ACPI for IRQ routing
[    0.285727] PCI: pci_cache_line_size set to 64 bytes
[    0.285810] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.285813] reserve RAM buffer: 00000000ae44a000 - 00000000afffffff 
[    0.285816] reserve RAM buffer: 00000000afd3f000 - 00000000afffffff 
[    0.285819] reserve RAM buffer: 00000000aff00000 - 00000000afffffff 
[    0.285920] NetLabel: Initializing
[    0.285922] NetLabel:  domain hash size = 128
[    0.285923] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.285936] NetLabel:  unlabeled traffic allowed by default
[    0.285963] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.285968] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.288012] Switching to clocksource hpet
[    0.294072] pnp: PnP ACPI init
[    0.294091] ACPI: bus type pnp registered
[    0.294517] pnp 00:00: [bus 00-ff]
[    0.294520] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.294523] pnp 00:00: [io  0x0d00-0xffff window]
[    0.294525] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.294528] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.294530] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.294532] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.294535] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.294537] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.294539] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.294543] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.294546] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.294548] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.294550] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.294552] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.294555] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.294557] pnp 00:00: [mem 0xc0000000-0xf6ffffff window]
[    0.294559] pnp 00:00: [mem 0xf8000000-0xfed3ffff window]
[    0.294562] pnp 00:00: [mem 0xfed45000-0xffffffff window]
[    0.294564] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.294632] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.294838] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.294841] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.294843] pnp 00:01: [mem 0xf7000000-0xf7ffffff]
[    0.294845] pnp 00:01: [mem 0xfec10000-0xfec1001f]
[    0.294847] pnp 00:01: [mem 0xfed80000-0xfed80fff]
[    0.294900] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.294903] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.294907] system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved
[    0.294910] system 00:01: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.294912] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.294916] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295059] pnp 00:02: [irq 0 disabled]
[    0.295070] pnp 00:02: [irq 8]
[    0.295072] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[    0.295100] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.295137] pnp 00:03: [io  0x0000-0x000f]
[    0.295139] pnp 00:03: [io  0x0081-0x008f]
[    0.295141] pnp 00:03: [io  0x00c0-0x00df]
[    0.295144] pnp 00:03: [dma 4]
[    0.295170] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.295178] pnp 00:04: [io  0x00f0-0x00fe]
[    0.295183] pnp 00:04: [irq 13]
[    0.295212] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.295248] pnp 00:05: [io  0x0070-0x0071]
[    0.295277] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.295284] pnp 00:06: [io  0x0061]
[    0.295315] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.295324] pnp 00:07: [io  0x0060]
[    0.295326] pnp 00:07: [io  0x0064]
[    0.295330] pnp 00:07: [irq 1]
[    0.295365] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.295380] pnp 00:08: [irq 12]
[    0.295415] pnp 00:08: Plug and Play ACPI device, IDs SYN1e28 SYN1e00 SYN0002 PNP0f13 (active)
[    0.295426] pnp 00:09: [io  0x0010-0x001f]
[    0.295428] pnp 00:09: [io  0x002e-0x002f]
[    0.295430] pnp 00:09: [io  0x0072-0x0073]
[    0.295431] pnp 00:09: [io  0x0080]
[    0.295433] pnp 00:09: [io  0x00b0-0x00b1]
[    0.295435] pnp 00:09: [io  0x0092]
[    0.295437] pnp 00:09: [io  0x0400-0x04cf]
[    0.295439] pnp 00:09: [io  0x04d0-0x04d1]
[    0.295441] pnp 00:09: [io  0x04d6]
[    0.295442] pnp 00:09: [io  0x0550]
[    0.295444] pnp 00:09: [io  0x0680-0x06ff]
[    0.295446] pnp 00:09: [io  0x077a]
[    0.295450] pnp 00:09: [io  0x0c00-0x0c01]
[    0.295451] pnp 00:09: [io  0x0c14]
[    0.295453] pnp 00:09: [io  0x0c50-0x0c52]
[    0.295455] pnp 00:09: [io  0x0c6c]
[    0.295457] pnp 00:09: [io  0x0c6f]
[    0.295459] pnp 00:09: [io  0x0cd0-0x0cdb]
[    0.295461] pnp 00:09: [io  0x0380-0x0387]
[    0.295515] system 00:09: [io  0x0400-0x04cf] has been reserved
[    0.295518] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.295520] system 00:09: [io  0x04d6] has been reserved
[    0.295523] system 00:09: [io  0x0550] has been reserved
[    0.295525] system 00:09: [io  0x0680-0x06ff] has been reserved
[    0.295528] system 00:09: [io  0x077a] has been reserved
[    0.295530] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.295533] system 00:09: [io  0x0c14] has been reserved
[    0.295535] system 00:09: [io  0x0c50-0x0c52] has been reserved
[    0.295538] system 00:09: [io  0x0c6c] has been reserved
[    0.295540] system 00:09: [io  0x0c6f] has been reserved
[    0.295543] system 00:09: [io  0x0cd0-0x0cdb] has been reserved
[    0.295546] system 00:09: [io  0x0380-0x0387] has been reserved
[    0.295549] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.295588] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[    0.295590] pnp 00:0a: [mem 0xffe00000-0xffffffff]
[    0.295636] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.295639] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
[    0.295642] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.296068] pnp: PnP ACPI: found 11 devices
[    0.296072] ACPI: ACPI bus type pnp unregistered
[    0.303276] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.303318] pci 0000:00:06.0: BAR 14: assigned [mem 0xd0500000-0xd05fffff]
[    0.303322] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.303325] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.303329] pci 0000:00:01.0:   bridge window [mem 0xd0200000-0xd03fffff]
[    0.303333] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.303337] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[    0.303341] pci 0000:00:05.0:   bridge window [mem 0xd0100000-0xd01fffff]
[    0.303347] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0020000-0xd002ffff pref]
[    0.303349] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[    0.303352] pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]
[    0.303356] pci 0000:00:06.0:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.303359] pci 0000:00:06.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.303364] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[    0.303385] pci 0000:00:01.0: setting latency timer to 64
[    0.303414] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.303417] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.303419] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303422] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.303424] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.303426] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.303429] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.303431] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.303434] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.303436] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.303439] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.303441] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.303443] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.303446] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.303448] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf6ffffff]
[    0.303451] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff]
[    0.303453] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[    0.303456] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.303458] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd03fffff]
[    0.303461] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.303464] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd01fffff]
[    0.303466] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.303469] pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff]
[    0.303471] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.303474] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.303476] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.303479] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.303481] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.303484] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.303486] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.303488] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.303491] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.303493] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.303496] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff]
[    0.303498] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.303501] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.303503] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.303506] pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff]
[    0.303508] pci_bus 0000:04: resource 18 [mem 0xc0000000-0xf6ffffff]
[    0.303511] pci_bus 0000:04: resource 19 [mem 0xf8000000-0xfed3ffff]
[    0.303513] pci_bus 0000:04: resource 20 [mem 0xfed45000-0xffffffff]
[    0.303562] NET: Registered protocol family 2
[    0.303695] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.304670] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.307773] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.308189] TCP: Hash tables configured (established 524288 bind 65536)
[    0.308191] TCP: reno registered
[    0.308206] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.308244] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.308351] NET: Registered protocol family 1
[    0.308363] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[    1.209936] pci 0000:01:05.0: Boot video device
[    1.209950] PCI: CLS 64 bytes, default 64
[    1.210003] Unpacking initramfs...
[    1.298576] Freeing initrd memory: 3892k freed
[    1.304965] Simple Boot Flag at 0x44 set to 0x1
[    1.305225] LVT offset 1 assigned for vector 0x400
[    1.305234] IBS: LVT offset 1 assigned
[    1.305247] perf: AMD IBS detected (0x0000001f)
[    1.305449] audit: initializing netlink socket (disabled)
[    1.305462] type=2000 audit(1343694678.199:1): initialized
[    1.306028] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.308209] VFS: Disk quotas dquot_6.5.2
[    1.308266] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.308367] msgmni has been set to 5510
[    1.308696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.308765] io scheduler noop registered
[    1.308769] io scheduler deadline registered
[    1.308850] io scheduler cfq registered (default)
[    1.309121] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[    1.309275] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[    1.309457] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.309460] vesafb: scrolling: redraw
[    1.309463] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.310034] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90002100000, using 4160k, total 4160k
[    1.472625] Console: switching to colour frame buffer device 170x48
[    1.634701] fb0: VESA VGA frame buffer device
[    1.634738] GHES: HEST is not enabled!
[    1.634871] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.635456] Linux agpgart interface v0.103
[    1.635514] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.653435] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.653468] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.653648] mousedev: PS/2 mouse device common for all mice
[    1.654821] rtc_cmos 00:05: RTC can wake from S4
[    1.654980] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.655005] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[    1.655014] cpuidle: using governor ladder
[    1.655016] cpuidle: using governor menu
[    1.655168] TCP: cubic registered
[    1.655276] NET: Registered protocol family 10
[    1.655471] NET: Registered protocol family 17
[    1.655475] Registering the dns_resolver key type
[    1.655719] PM: Checking hibernation image partition /dev/sda5
[    1.675104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.688604] PM: Hibernation image not present or could not be loaded.
[    1.688619] registered taskstats version 1
[    1.689209] rtc_cmos 00:05: setting system clock to 2012-07-31 00:31:19 UTC (1343694679)
[    1.689271] Initializing network drop monitor service
[    1.690536] Freeing unused kernel memory: 740k freed
[    1.690771] Write protecting the kernel read-only data: 8192k
[    1.696340] Freeing unused kernel memory: 1588k freed
[    1.699286] Freeing unused kernel memory: 640k freed
[    1.710679] systemd-udevd[67]: starting version 187
[    1.712746] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    1.712749] AMD IOMMUv2 functionality not available on this sytem
[    1.712966] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    1.712973] ACPI: Power Button [PWRB]
[    1.713662] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[    1.713942] ACPI: Lid Switch [LID]
[    1.714102] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.714108] ACPI: Power Button [PWRF]
[    1.718166] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    1.718171] Disabling lock debugging due to kernel taint
[    1.726407] [fglrx] Maximum main memory to use for locked dma buffers: 2617 MBytes.
[    1.726497] [fglrx]   vendor: 1002 device: 9712 count: 1
[    1.726988] [fglrx] ioport: bar 1, base 0x3000, size: 0x100
[    1.727005] pci 0000:01:05.0: setting latency timer to 64
[    1.727445] [fglrx] Kernel PAT support is enabled
[    1.727467] [fglrx] module loaded - fglrx 8.97.2 [Jul  4 2012] with 1 minors
[    1.765726] SCSI subsystem initialized
[    1.768298] usbcore: registered new interface driver usbfs
[    1.768323] usbcore: registered new interface driver hub
[    1.768470] usbcore: registered new device driver usb
[    1.769172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.769607] libata version 3.00 loaded.
[    1.773111] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    1.773116] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.773151] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.773165] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.773183] QUIRK: Enable AMD PLL fix
[    1.773195] ehci_hcd 0000:00:12.2: debug port 1
[    1.773223] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0408600
[    1.775997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.782172] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.782382] hub 1-0:1.0: USB hub found
[    1.782387] hub 1-0:1.0: 5 ports detected
[    1.783152] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    1.783157] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.783169] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.783179] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.783202] ehci_hcd 0000:00:13.2: debug port 1
[    1.783218] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0408500
[    1.792207] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.792433] hub 2-0:1.0: USB hub found
[    1.792438] hub 2-0:1.0: 5 ports detected
[    1.793262] ehci_hcd 0000:00:16.2: setting latency timer to 64
[    1.793268] ehci_hcd 0000:00:16.2: EHCI Host Controller
[    1.793285] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.793296] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.793323] ehci_hcd 0000:00:16.2: debug port 1
[    1.793339] ehci_hcd 0000:00:16.2: irq 17, io mem 0xd0408400
[    1.802220] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.802425] hub 3-0:1.0: USB hub found
[    1.802429] hub 3-0:1.0: 4 ports detected
[    1.806383] ahci 0000:00:11.0: version 3.0
[    1.806504] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.806508] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.806863] scsi0 : ahci
[    1.806962] scsi1 : ahci
[    1.807019] ata1: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408100 irq 19
[    1.807023] ata2: SATA max UDMA/133 abar m1024@0xd0408000 port 0xd0408180 irq 19
[    1.810579] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    1.810585] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.810606] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.810644] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd0407000
[    1.866366] hub 4-0:1.0: USB hub found
[    1.866375] hub 4-0:1.0: 5 ports detected
[    1.866647] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    1.866651] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.866661] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.866684] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0406000
[    1.922892] hub 5-0:1.0: USB hub found
[    1.922899] hub 5-0:1.0: 5 ports detected
[    1.923093] ohci_hcd 0000:00:14.5: setting latency timer to 64
[    1.923097] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.923107] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.923131] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd0405000
[    1.979503] hub 6-0:1.0: USB hub found
[    1.979511] hub 6-0:1.0: 2 ports detected
[    1.979694] ohci_hcd 0000:00:16.0: setting latency timer to 64
[    1.979698] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.979708] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.979730] ohci_hcd 0000:00:16.0: irq 18, io mem 0xd0404000
[    2.036065] hub 7-0:1.0: USB hub found
[    2.036073] hub 7-0:1.0: 4 ports detected
[    2.291388] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.291432] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.292252] ata1.00: ATA-8: Hitachi HTS725025A9A364, PC2OC72E, max UDMA/100
[    2.292257] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.293313] ata1.00: configured for UDMA/100
[    2.293576] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72502 PC2O PQ: 0 ANSI: 5
[    2.304683] Refined TSC clocksource calibration: 2094.754 MHz.
[    2.304696] Switching to clocksource tsc
[    2.310380] ata2.00: ATAPI: hp       CDDVDW TS-L633N, 0300, max UDMA/100
[    2.328088] ata2.00: configured for UDMA/100
[    2.332477] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633N  0300 PQ: 0 ANSI: 5
[    2.335419] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.335460] sd 0:0:0:0: [sda] Write Protect is off
[    2.335463] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.335480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.347938] usb 5-2: new full-speed USB device number 2 using ohci_hcd
[    2.512020] input: Areson USB Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input4
[    2.512121] generic-usb 0003:E0FF:0005.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:13.0-2/input0
[    2.519893] input: Areson USB Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input5
[    2.520020] generic-usb 0003:E0FF:0005.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [Areson USB Device] on usb-0000:00:13.0-2/input1
[    2.520055] usbcore: registered new interface driver usbhid
[    2.520058] usbhid: USB HID core driver
[    2.676513]  sda: sda1 sda2 sda3 < sda5 > sda4
[    2.676976] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.682454] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.682459] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.682653] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.294771] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    3.982610] systemd[1]: systemd 187 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
[    4.178974] systemd[1]: Inserted module 'autofs4'
[    4.189095] systemd[1]: Set hostname to <thomas-laptop>.
[    4.858427] systemd-udevd[144]: starting version 187
[    4.891299] systemd-journald[149]: Fixed max_use=137.9M max_size=17.2M min_size=64.0K keep_free=68.9M
[    4.891344] systemd-journald[149]: Reserving 31388 entries in hash table.
[    4.892175] systemd-journald[149]: Vacuuming...
[    5.163538] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[    5.523061] systemd-journald[149]: Received SIGUSR1
[    5.910019] wmi: Mapper loaded
[    5.987108] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[    5.987116] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8800ab161078), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    5.987125] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8800ab161258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    5.987160] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[    5.987164] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8800ab161078), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    5.987170] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8800ab161258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    5.987230] input: HP WMI hotkeys as /devices/virtual/input/input6
[    5.987297] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[    5.987302] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8800ab161078), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    5.987308] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8800ab161258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    5.987337] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[    5.987341] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node ffff8800ab161078), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    5.987346] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8800ab161258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[    6.040840] ACPI: AC Adapter [ACAD] (on-line)
[    6.052200] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    6.057950] ACPI: processor limited to max C-state 1
[    6.064847] [Firmware Bug]: Invalid critical threshold (0)
[    6.076533] cfg80211: Calling CRDA to update world regulatory domain
[    6.081251] thermal LNXTHERM:00: registered as thermal_zone0
[    6.081255] ACPI: Thermal Zone [THRM] (60 C)
[    6.083725] acpi device:04: registered as cooling_device2
[    6.083808] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[    6.083859] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.087680] ACPI: Battery Slot [BAT0] (battery present)
[    6.109943] powernow-k8: Found 1 AMD Athlon(tm) II P320 Dual-Core Processor (2 cpu cores) (version 2.20.00)
[    6.110020] powernow-k8:    0 : pstate 0 (2100 MHz)
[    6.110022] powernow-k8:    1 : pstate 1 (1500 MHz)
[    6.110024] powernow-k8:    2 : pstate 2 (800 MHz)
[    6.146140] microcode: CPU0: patch_level=0x010000c8
[    6.161619] microcode: failed to load file amd-ucode/microcode_amd.bin
[    6.163257] microcode: CPU1: patch_level=0x010000c8
[    6.164956] microcode: failed to load file amd-ucode/microcode_amd.bin
[    6.166708] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.270630] EDAC MC: Ver: 2.1.0
[    6.399765] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[    6.399947] sp5100_tco: mmio address 0xb8fe00 already in use
[    6.413163] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.413343] MCE: In-kernel MCE decoding enabled.
[    6.418998] AMD64 EDAC driver v3.4.0
[    6.419160] EDAC amd64: DRAM ECC disabled.
[    6.419182] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    6.419185]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    6.419189]  (Note that use of the override may cause unknown side effects.)
[    6.426616] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.431059] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.431232] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
[    6.431647] r8169 0000:03:00.0: eth0: RTL8102e at 0xffffc90002fcc000, c8:0a:a9:aa:3a:55, XID 04e00000 IRQ 42
[    6.500743] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMBI 1 (20120320/utaddress-251)
[    6.500764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.545653] ath: EEPROM regdomain: 0x60
[    6.545655] ath: EEPROM indicates we should expect a direct regpair map
[    6.545659] ath: Country alpha2 being used: 00
[    6.545661] ath: Regpair used: 0x60
[    6.620648] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    6.621219] Registered led device: ath9k-phy0
[    6.621235] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90003060000, irq=17
[    6.656536] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[    6.742675] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
[    6.755810] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    6.755897] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    7.195604] Adding 2000056k swap on /dev/sda5.  Priority:-1 extents:1 across:2000056k 
[    7.234039] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400
[    7.317663] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[    9.708358] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    9.714976] r8169 0000:03:00.0: eth0: link down
[    9.715546] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.455279] wlan0: authenticate with 00:1c:10:21:57:f2
[   12.468144] wlan0: send auth to 00:1c:10:21:57:f2 (try 1/3)
[   12.470303] wlan0: authenticated
[   12.480421] wlan0: associate with 00:1c:10:21:57:f2 (try 1/3)
[   12.484636] wlan0: RX AssocResp from 00:1c:10:21:57:f2 (capab=0x411 status=0 aid=1)
[   12.493053] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   12.493330] wlan0: associated
[   23.574469] wlan0: no IPv6 routers present

Xorg.0.log Output

[    10.183] 
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    10.183] X Protocol Version 11, Revision 0
[    10.183] Build Operating System: Linux 3.4.4-3-ARCH x86_64 
[    10.183] Current Operating System: Linux thomas-laptop 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64
[    10.183] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=9fb3348b-11ea-4d65-ab96-c7e7a3ad24f8 ro init=/bin/systemd resume=/dev/sda5 nomodeset quiet
[    10.183] Build Date: 09 July 2012  03:59:39PM
[    10.183]  
[    10.183] Current version of pixman: 0.26.2
[    10.183] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    10.183] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    10.184] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 30 18:25:04 2012
[    10.219] (==) Using config file: "/etc/X11/xorg.conf"
[    10.219] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    10.240] (==) ServerLayout "aticonfig Layout"
[    10.240] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    10.240] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    10.240] (**) |   |-->Device "aticonfig-Device[0]-0"
[    10.241] (==) Automatically adding devices
[    10.241] (==) Automatically enabling devices
[    10.275] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    10.275] 	Entry deleted from font path.
[    10.290] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    10.290] 	Entry deleted from font path.
[    10.290] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    10.291] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    10.291] 	Entry deleted from font path.
[    10.291] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    10.291] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    10.291] (==) ModulePath set to "/usr/lib/xorg/modules"
[    10.291] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    10.291] (II) Loader magic: 0x7c8b00
[    10.291] (II) Module ABI versions:
[    10.291] 	X.Org ANSI C Emulation: 0.4
[    10.291] 	X.Org Video Driver: 12.0
[    10.291] 	X.Org XInput driver : 16.0
[    10.291] 	X.Org Server Extension : 6.0
[    10.292] (--) PCI:*(0:1:5:0) 1002:9712:103c:1444 rev 0, Mem @ 0xc0000000/268435456, 0xd0300000/65536, 0xd0200000/1048576, I/O @ 0x00003000/256
[    10.293] (II) Open ACPI successful (/var/run/acpid.socket)
[    10.293] (II) "extmod" will be loaded by default.
[    10.293] (II) "dbe" will be loaded by default.
[    10.293] (II) "glx" will be loaded by default.
[    10.293] (II) "record" will be loaded by default.
[    10.293] (II) "dri" will be loaded by default.
[    10.293] (II) "dri2" will be loaded by default.
[    10.293] (II) LoadModule: "extmod"
[    10.325] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    10.337] (II) Module extmod: vendor="X.Org Foundation"
[    10.338] 	compiled for 1.12.3, module version = 1.0.0
[    10.338] 	Module class: X.Org Server Extension
[    10.338] 	ABI class: X.Org Server Extension, version 6.0
[    10.338] (II) Loading extension MIT-SCREEN-SAVER
[    10.338] (II) Loading extension XFree86-VidModeExtension
[    10.338] (II) Loading extension XFree86-DGA
[    10.338] (II) Loading extension DPMS
[    10.338] (II) Loading extension XVideo
[    10.338] (II) Loading extension XVideo-MotionCompensation
[    10.338] (II) Loading extension X-Resource
[    10.338] (II) LoadModule: "dbe"
[    10.338] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    10.339] (II) Module dbe: vendor="X.Org Foundation"
[    10.339] 	compiled for 1.12.3, module version = 1.0.0
[    10.339] 	Module class: X.Org Server Extension
[    10.339] 	ABI class: X.Org Server Extension, version 6.0
[    10.339] (II) Loading extension DOUBLE-BUFFER
[    10.339] (II) LoadModule: "glx"
[    10.339] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    10.370] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    10.370] 	compiled for 6.9.0, module version = 1.0.0
[    10.371] (II) Loading extension GLX
[    10.371] (II) LoadModule: "record"
[    10.371] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    10.372] (II) Module record: vendor="X.Org Foundation"
[    10.372] 	compiled for 1.12.3, module version = 1.13.0
[    10.372] 	Module class: X.Org Server Extension
[    10.372] 	ABI class: X.Org Server Extension, version 6.0
[    10.372] (II) Loading extension RECORD
[    10.372] (II) LoadModule: "dri"
[    10.372] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    10.381] (II) Module dri: vendor="X.Org Foundation"
[    10.381] 	compiled for 1.12.3, module version = 1.0.0
[    10.381] 	ABI class: X.Org Server Extension, version 6.0
[    10.381] (II) Loading extension XFree86-DRI
[    10.381] (II) LoadModule: "dri2"
[    10.381] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    10.382] (II) Module dri2: vendor="X.Org Foundation"
[    10.382] 	compiled for 1.12.3, module version = 1.2.0
[    10.382] 	ABI class: X.Org Server Extension, version 6.0
[    10.382] (II) Loading extension DRI2
[    10.382] (II) LoadModule: "fglrx"
[    10.382] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    10.665] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    10.665] 	compiled for 1.4.99.906, module version = 8.97.2
[    10.665] 	Module class: X.Org Video Driver
[    10.671] (II) Loading sub module "fglrxdrm"
[    10.671] (II) LoadModule: "fglrxdrm"
[    10.671] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    10.691] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    10.691] 	compiled for 1.4.99.906, module version = 8.97.2
[    10.691] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    10.691] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3               
[    10.691] (II) ATI Proprietary Linux Driver Build Date: Jul  3 2012 23:56:30
[    10.691] (++) using VT number 7

[    10.854] (WW) Falling back to old probe method for fglrx
[    10.934] (II) Loading PCS database from /etc/ati/amdpcsdb
[    10.962] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[    10.963] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[    10.964] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    10.978] (II) AMD Video driver is signed
[    10.978] (II) fglrx(0): pEnt->device->identifier=0x10f8bc0
[    10.978] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    10.978] (II) Loading sub module "vgahw"
[    10.978] (II) LoadModule: "vgahw"
[    10.979] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    10.995] (II) Module vgahw: vendor="X.Org Foundation"
[    10.995] 	compiled for 1.12.3, module version = 0.1.0
[    10.995] 	ABI class: X.Org Video Driver, version 12.0
[    10.996] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    10.996] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    10.996] (==) fglrx(0): Default visual is TrueColor
[    10.996] (**) fglrx(0): Option "DPMS" "true"
[    10.996] (==) fglrx(0): RGB weight 888
[    10.996] (II) fglrx(0): Using 8 bits per RGB 
[    10.996] (==) fglrx(0): Buffer Tiling is ON
[    11.010] (II) Loading sub module "fglrxdrm"
[    11.010] (II) LoadModule: "fglrxdrm"
[    11.010] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    11.011] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    11.011] 	compiled for 1.4.99.906, module version = 8.97.2
[    11.027] ukiDynamicMajor: found major device number 252
[    11.027] ukiDynamicMajor: found major device number 252
[    11.027] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[    11.027] ukiOpenDevice: node name is /dev/ati/card0
[    11.027] ukiOpenDevice: open result is 12, (OK)
[    11.027] ukiOpenByBusid: ukiOpenMinor returns 12
[    11.027] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[    11.028] (**) fglrx(0): NoAccel = NO
[    11.028] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    11.028] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[    11.028] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1444)
[    11.028] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    11.028] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    11.028] (--) fglrx(0): MMIO registers at 0xd0300000
[    11.028] (--) fglrx(0): I/O port at 0x00003000
[    11.028] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    11.040] (II) fglrx(0): ATIF platform detected
[    11.041] (II) fglrx(0): AC Adapter is used
[    11.056] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    11.058] (II) Loading sub module "vbe"
[    11.058] (II) LoadModule: "vbe"
[    11.058] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    11.069] (II) Module vbe: vendor="X.Org Foundation"
[    11.069] 	compiled for 1.12.3, module version = 1.1.0
[    11.070] 	ABI class: X.Org Video Driver, version 12.0
[    11.071] (II) fglrx(0): VESA BIOS detected
[    11.071] (II) fglrx(0): VESA VBE Version 3.0
[    11.071] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    11.071] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    11.071] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[    11.071] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    11.071] (II) fglrx(0): VESA VBE OEM Product: RS880M
[    11.071] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    11.088] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    11.088] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[    11.088] (II) fglrx(0): PCIE card detected
[    11.088] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    11.088] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    11.090] (II) fglrx(0): Using adapter: 1:5.0.
[    11.099] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[    11.118] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[    11.119] (II) fglrx(0): RandR 1.2 support is enabled!
[    11.119] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    11.119] (==) fglrx(0): Center Mode is disabled 
[    11.119] (II) Loading sub module "fb"
[    11.119] (II) LoadModule: "fb"
[    11.133] (II) Loading /usr/lib/xorg/modules/libfb.so
[    11.135] (II) Module fb: vendor="X.Org Foundation"
[    11.135] 	compiled for 1.12.3, module version = 1.0.0
[    11.135] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    11.135] (II) Loading sub module "ddc"
[    11.135] (II) LoadModule: "ddc"
[    11.135] (II) Module "ddc" already built-in

-Thomas aka Grimsbain

Offline

#4217 2012-08-01 22:40:19

kuglee
Member
Registered: 2011-09-02
Posts: 61

Re: The AMD/ATI Bar & Grill

Hi!

I'm using mplayer-vaapi with '-vo vaapi -va vaapi' options. I have the tear free desktop enabled. My problem is that the cpu usage drops, but the tearing remains. I've tried this with compiz and metacity too. I'm using Mobility Radeon HD 4330 512 Mb card with catalyst-hd234k.

EDIT: I've also tried '-vo vaapi:gl'

Last edited by kuglee (2012-08-01 22:45:23)

Offline

#4218 2012-08-02 09:07:13

Unia
Member
From: The Netherlands
Registered: 2010-03-30
Posts: 2,471
Website

Re: The AMD/ATI Bar & Grill

^ Sometimes I have some tearing too, I think this happens when the file you're playing is low res but you play it "stretched" or full screen (because when I don't, it plays without tearing).

Is that also the case with you?


If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

#4219 2012-08-02 10:24:20

C5OK5Y
Member
Registered: 2010-07-04
Posts: 48

Re: The AMD/ATI Bar & Grill

kuglee wrote:

Hi!

I'm using mplayer-vaapi with '-vo vaapi -va vaapi' options. I have the tear free desktop enabled. My problem is that the cpu usage drops, but the tearing remains. I've tried this with compiz and metacity too. I'm using Mobility Radeon HD 4330 512 Mb card with catalyst-hd234k.

EDIT: I've also tried '-vo vaapi:gl'

I've looked into it and noticed it as well. My previous settings which avoided all tearing aren't working any more. It seems to be a Catalyst bug. Also the system feels slower and flash videos aren't very enjoyable in fullscreen any more (used to play 1080p OK).The slowness problem somehow disappeared.

@Unia: I think your problem is caused by the fact that Tear Free Desktop only applies to windowed applications. To avoid tearing in fullscreen applications (i.e. playing a video in fullscreen), you have to set 3D > More Settings > Wait for vertical refresh in amdcccle to On, unless application specifies or Always On. But as I have written above, it doesn't any more work in the current version.

EDIT: It seems that the tearing problems are gone again. Catalyst is just probably buggy. Tearing only rarely appears in flash (but that tearing might have been encoded into the video).

Last edited by C5OK5Y (2012-08-26 16:56:48)

Offline

#4220 2012-08-02 20:16:42

kuglee
Member
Registered: 2011-09-02
Posts: 61

Re: The AMD/ATI Bar & Grill

Unia wrote:

^ Sometimes I have some tearing too, I think this happens when the file you're playing is low res but you play it "stretched" or full screen (because when I don't, it plays without tearing).

Is that also the case with you?

Every video is tearing for me.

Offline

#4221 2012-08-03 14:16:02

HariSeldon
Member
Registered: 2012-04-30
Posts: 13

Re: The AMD/ATI Bar & Grill

Hi at all,
I've read over 50 pages of the thread, and search on the wiki, but there's a thing I can't understood:

1)
There is or not an updated repo or a package on AUR that compiles the ATI driver with PXP support?

I've tried (just as test) in this way on kubuntu 12.04:

http://ubuntuforums.org/showthread.php?t=1930450/

and it works.
I've trying to do the same on Arch, my main linux distro, but still unlucky.

2)
the Catalyst repo manteined by Violo isn't updated: it search for libglx still on /usr/lib64 instead of /usr/lib (as the new Arch policy).
Maybe there is another repository other that in the wiki?

3)
There are so many alternatives to install fglrx driver and no-one working for me (Thinkpad E320 with 6630M and intel 3000). Which is the reccomanded way to do it?

4)
I'm on Arch 3.4.7 and , in addiction to powerexpress error, i've "no screens found" with repository or AUR installation...


Thanks,
HS

Last edited by HariSeldon (2012-08-03 14:23:13)

Offline

#4222 2012-08-04 12:24:50

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,300
Website

Re: The AMD/ATI Bar & Grill

@HariSeldon:
look at the previous page:
https://bbs.archlinux.org/viewtopic.php … 7#p1135607
you could try to modify my PKGBUILD from mentioned in url tarball just a little with newest changes and test it, i unfortunatelly don't have pxp hw and that's the reason why i'm not providing pxp support.

Ad 2): newest catalyst is updated, just not to work with pxp tongue.
it's searching in /usr/lib64 because it's using originall ati's switching scripts, which are in fact useless on arch. In mentioned url you will find mine switching scripts which would search in /usr/lib.
But because i cannot even test it right i won't provide pxp changes into mainline, those changes are somehow modifying arch's philosophy by ie. providing ability to install two separate libgl libraries, etc.
And while not being tested right are somehow dangerous and not necessary for most of the systems.


Edit: OK, i did it for you
Welcome back catalyst-total-pxp @AUR: https://aur.archlinux.org/packages.php?ID=61461
Like said i'm unable to test it, i cannot even switch to radeon because it's not supporting my card (7850), but i can see that it's symlinking good and i was able to startx with fglrx at least.

There's usefull script i wrote called pxp_switch_catalyst, it is:
* switching xorg.conf - it will rename xorg.conf into xorg.conf.cat
(if there's fglrx inside) or xorg.conf.oth (if there's intel or radeon inside).
And then it will create link to xorg.conf depending on what did you choose
* running aticonfig --px-Xgpu
* running switchlibGL
* adding/removing fglrx into/from MODULES in rc.conf
Usage: pxp_switch_catalyst <amd|intel|query>
#    amd:   switches to the AMD version of libs.
#    intel: switches to the open-source version of libs.
#    query: checks, which version is currently active and prints either "amd"
#    or "intel" or "unknown" on the standard output.
#    must be root to execute this script

Oh, i was wrong: because path /usr/lib64 is hardcoded into aticonfig binary and i don't actually like/want to hack it whenever aticonfig will change - this package will create /usr/lib64 directory with modified ati's switching scripts inside

Edit2: ofcourse to use this with amd/intel open drivers you will have to install libgl and open drivers for your hw like xf86-video-ati, ati-dri

Edit3: updating catalyst-total-pxp to 12.6-2:
looks like we don't need /usr/lib64 (thank you ATI!, i dunno when you did this, but last year i was waiting for months for this:P ), so removing it and moving switching scripts into /usr/lib/fglrx dir

Sidenote:
running aticonfig --px-igpu or aticonfig --px-dgpu won't run switchlib* scripts (no matter if it's in /usr/lib or /lib64) it will though change an entry in /etc/ati/amdpcsdb file (at leats it did not for me but i don't have pxp hw...), so if you want to switch between amd/intel then don't forget to run those scripts (or use pxp_switch_catalyst).
Run aticonfig --px-igpu or aticonfig --px-dgpu to switch between two amd cards.

Edit4: which catalyst you were using with kubuntu 12.4? Did you install 12.6 or used stock one?



catalyst 12.8
on amd website there is download link for catalyst 12.8, but unfortunatelly the link is dead...
it should be alive soon, though i won't be able to update catalyst till friday hmm

Last edited by Vi0L0 (2012-08-15 22:38:46)

Offline

#4223 2012-08-16 09:51:27

HariSeldon
Member
Registered: 2012-04-30
Posts: 13

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

@HariSeldon:
look at the previous page:
https://bbs.archlinux.org/viewtopic.php … 7#p1135607
you could try to modify my PKGBUILD from mentioned in url tarball just a little with newest changes and test it, i unfortunatelly don't have pxp hw and that's the reason why i'm not providing pxp support.

Ad 2): newest catalyst is updated, just not to work with pxp :P.
it's searching in /usr/lib64 because it's using originall ati's switching scripts, which are in fact useless on arch. In mentioned url you will find mine switching scripts which would search in /usr/lib.
But because i cannot even test it right i won't provide pxp changes into mainline, those changes are somehow modifying arch's philosophy by ie. providing ability to install two separate libgl libraries, etc.
And while not being tested right are somehow dangerous and not necessary for most of the systems.


Edit: OK, i did it for you
Welcome back catalyst-total-pxp @AUR: https://aur.archlinux.org/packages.php?ID=61461
Like said i'm unable to test it, i cannot even switch to radeon because it's not supporting my card (7850), but i can see that it's symlinking good and i was able to startx with fglrx at least.

There's usefull script i wrote called pxp_switch_catalyst, it is:
* switching xorg.conf - it will rename xorg.conf into xorg.conf.cat
(if there's fglrx inside) or xorg.conf.oth (if there's intel or radeon inside).
And then it will create link to xorg.conf depending on what did you choose
* running aticonfig --px-Xgpu
* running switchlibGL
* adding/removing fglrx into/from MODULES in rc.conf
Usage: pxp_switch_catalyst <amd|intel|query>
#    amd:   switches to the AMD version of libs.
#    intel: switches to the open-source version of libs.
#    query: checks, which version is currently active and prints either "amd"
#    or "intel" or "unknown" on the standard output.
#    must be root to execute this script

Oh, i was wrong: because path /usr/lib64 is hardcoded into aticonfig binary and i don't actually like/want to hack it whenever aticonfig will change - this package will create /usr/lib64 directory with modified ati's switching scripts inside

Edit2: ofcourse to use this with amd/intel open drivers you will have to install libgl and open drivers for your hw like xf86-video-ati, ati-dri

Edit3: updating catalyst-total-pxp to 12.6-2:
looks like we don't need /usr/lib64 (thank you ATI!, i dunno when you did this, but last year i was waiting for months for this:P ), so removing it and moving switching scripts into /usr/lib/fglrx dir

Sidenote:
running aticonfig --px-igpu or aticonfig --px-dgpu won't run switchlib* scripts (no matter if it's in /usr/lib or /lib64) it will though change an entry in /etc/ati/amdpcsdb file (at leats it did not for me but i don't have pxp hw...), so if you want to switch between amd/intel then don't forget to run those scripts (or use pxp_switch_catalyst).
Run aticonfig --px-igpu or aticonfig --px-dgpu to switch between two amd cards.

Edit4: which catalyst you were using with kubuntu 12.4? Did you install 12.6 or used stock one?



catalyst 12.8
on amd website there is download link for catalyst 12.8, but unfortunatelly the link is dead...
it should be alive soon, though i won't be able to update catalyst till friday :/

Thanks man!
I'll test it for you as soon as i can (I'm busy with holiday now :D ).

In Kubuntu I've installed 12.6 from official repo and everything "just works". The Canonical team have rewritten the switchlibgl script in python and it work really well: it doesn't do only the libgl.so switch, but it shutdown the ati card when not used (you can see this by "lspci -vnnn | grep VGA" )

Offline

#4224 2012-08-16 13:00:21

thebluesgnr
Member
Registered: 2012-04-02
Posts: 18

Re: The AMD/ATI Bar & Grill

http://www2.ati.com/drivers/linux/amd-d … x86_64.zip is the correct link for catalyst 12.8

Offline

#4225 2012-08-16 19:32:21

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,300
Website

Re: The AMD/ATI Bar & Grill

thebluesgnr wrote:

http://www2.ati.com/drivers/linux/amd-d … x86_64.zip is the correct link for catalyst 12.8

Thanks!

And finally! I'm able to use browsers like chromium or firefox which were lagging on my kwin before.
Haven't tested games (got warsow only ;P) but at least the desktop is far more usefull and much faster than 12.6
Also kde's direct rendering is getting better and better, hope it will be as fast as it could be with next release.
Edit: GNOME3 also feels faster, and it's usable without CLUTTER_VBLANK=none (then chromium or firefox are not that fast, but still better than with 12.6,)
Do amd devs preffer opera? Because since months it's the only "mainline" browser which was not touched by a lagg on my 7850.


I will perform some test and check packages, update should come soon.
EDIT: AUR was updated, so was the repo



EDIT2: i'm getting good feedback that the catalyst-total-pxp is working fine on some hardware so i think i will put catalyst-utils-pxp package into the repos (hd234k also),
i also have to update catalyst-lts package (sorry for delay!) and figure out how to support systemd with catalyst-daemon
but this will happen when i'll get some free time...



HariSeldon wrote:

Thanks man!
I'll test it for you as soon as i can (I'm busy with holiday now big_smile ).

wish you luck with this!

HariSeldon wrote:

In Kubuntu I've installed 12.6 from official repo and everything "just works". The Canonical team have rewritten the switchlibgl script in python and it work really well: it doesn't do only the libgl.so switch, but it shutdown the ati card when not used (you can see this by "lspci -vnnn | grep VGA" )

Ubuntu also got `alternatives` tool, which could be usefull here with pxp, arch does not have it...

Last edited by Vi0L0 (2012-08-16 21:05:01)

Offline

Board footer

Powered by FluxBB