You are not logged in.

Pages: 1

#1 2012-08-02 14:29:33

D4ve
Member
Registered: 2012-08-02
Posts: 209

[Solved (more or less)] Rebuild the RaspberryPi Image

Hello smile

A few days ago my raspberrypi arrived and i want to re-compile the installed packages specific to the armv6 hardfloat architecture. The rpi is really slow so it will take approximately 20 days to recompile only the installed packages. My idea is to speed up this with my Core i7, running a 64bit version of ArchLinux, I have never done something like this before, so anyone has an introduction to cross-compiling over 500 packages?

Any help would be appreciated

Last edited by D4ve (2012-09-19 15:19:26)

Offline

#2 2012-08-02 16:19:15

ANOKNUSA
Member
Registered: 2010-10-22
Posts: 2,141

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

Check out the Distcc wiki entries both here and at the Arch ARM site.

Linux != Windows  ::  Ask Questions the Smart Way  ::  Configs

Offline

#3 2012-08-02 19:33:09

D4ve
Member
Registered: 2012-08-02
Posts: 209

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

Hm, distcc sounds good, thx.

Hope the whole toolchain fits into a 8GB SD-Card smile

Offline

#4 2012-08-02 19:38:24

gabx
Member
From: Geneva, Switzerland
Registered: 2011-11-20
Posts: 179
Website

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

cross-tool-NG is your friend:
https://aur.archlinux.org/packages.php?ID=45460

Pick up the Mercurial version, much more up to date.

I installed it with no issue and after a little search I found how to edit the config for armv6.

I have too a RPI and wants build some packages on my Arch box.

Offline

#5 2012-08-03 15:59:31

D4ve
Member
Registered: 2012-08-02
Posts: 209

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

What's your config for armv6?

Mine ist just the default armv5te-confguration but i changed a few lines:

CT_ARCH_ARCH=""
CT_ARCH_CPU="arm1176jzf-s"
CT_ARCH_TUNE="arm1176jzf-s"
CT_ARCH_FLOAT_HW=y
CT_ARCH_FLOAT="hard"

Hope that works (couldn't try it, ct-ng build has still errors, but i'm working on it...)

EDIT: Does someone know what's going wrong on my PC? I've installed crosstool-ng-hg from aur. As described in the tutorial, i've setup the necessary things, my home-folder looks like this:

~/cross/bin/.config
       /src/linux-3.1.tar.bz2
           /gcc-4.7.1.tar.bz2
           /binutils-2.22.tar.bz2

(I think i don't need the 3 *.tar.bz2-archives, but i only followed the guide on archlinuxarm)

If i run "ct-ng build" within ~/cross/bin i get following errors:

...
[INFO ]  Retrieving needed toolchain components' tarballs
[ERROR]    Unknown extension for custom linux tarball ''
[00:44] / make: *** [build] Error 1

crosstools-ng-hg version is 3011-2

Last edited by D4ve (2012-08-03 17:36:28)

Offline

#6 2012-08-03 16:12:38

gabx
Member
From: Geneva, Switzerland
Registered: 2011-11-20
Posts: 179
Website

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

#
# Automatically generated make config: don't edit
# crosstool-NG hg+default-1175e884f5cf Configuration
# Mon Jul 30 13:17:46 2012
#
CT_CONFIGURE_has_xz=y
CT_CONFIGURE_has_cvs=y
CT_CONFIGURE_has_svn=y
CT_MODULES=y

#
# Paths and misc options
#

#
# crosstool-NG behavior
#
# CT_OBSOLETE is not set
CT_EXPERIMENTAL=y
CT_DEBUG_CT=y
# CT_DEBUG_PAUSE_STEPS is not set
# CT_DEBUG_CT_SAVE_STEPS is not set
# CT_NO_OVERIDE_LC_MESSAGES is not set

#
# Paths
#
CT_LOCAL_TARBALLS_DIR=""
CT_WORK_DIR="${CT_TOP_DIR}/.build"
CT_PREFIX_DIR="${HOME}/x-tools/${CT_TARGET}"
CT_INSTALL_DIR="${CT_PREFIX_DIR}"
CT_RM_RF_PREFIX_DIR=y
CT_REMOVE_DOCS=y
CT_INSTALL_DIR_RO=y
CT_STRIP_ALL_TOOLCHAIN_EXECUTABLES=y

#
# Downloading
#
# CT_FORBID_DOWNLOAD is not set
# CT_FORCE_DOWNLOAD is not set
CT_CONNECT_TIMEOUT=10
# CT_ONLY_DOWNLOAD is not set
# CT_USE_MIRROR is not set

#
# Extracting
#
# CT_FORCE_EXTRACT is not set
CT_OVERIDE_CONFIG_GUESS_SUB=y
# CT_ONLY_EXTRACT is not set
CT_PATCH_BUNDLED=y
# CT_PATCH_LOCAL is not set
# CT_PATCH_BUNDLED_LOCAL is not set
# CT_PATCH_LOCAL_BUNDLED is not set
# CT_PATCH_BUNDLED_FALLBACK_LOCAL is not set
# CT_PATCH_LOCAL_FALLBACK_BUNDLED is not set
# CT_PATCH_NONE is not set
CT_PATCH_ORDER="bundled"

#
# Build behavior
#
CT_PARALLEL_JOBS=0
CT_LOAD=0
CT_USE_PIPES=y
CT_EXTRA_FLAGS_FOR_HOST=""
# CT_CONFIG_SHELL_SH is not set
# CT_CONFIG_SHELL_ASH is not set
CT_CONFIG_SHELL_BASH=y
# CT_CONFIG_SHELL_CUSTOM is not set
CT_CONFIG_SHELL="${bash}"

#
# Logging
#
# CT_LOG_ERROR is not set
# CT_LOG_WARN is not set
# CT_LOG_INFO is not set
# CT_LOG_EXTRA is not set
# CT_LOG_ALL is not set
CT_LOG_DEBUG=y
CT_LOG_LEVEL_MAX="DEBUG"
# CT_LOG_SEE_TOOLS_WARN is not set
CT_LOG_TO_FILE=y
CT_LOG_FILE_COMPRESS=y

#
# Target options
#
CT_ARCH="arm"
CT_ARCH_SUPPORTS_BOTH_MMU=y
CT_ARCH_SUPPORTS_BOTH_ENDIAN=y
CT_ARCH_SUPPORTS_32=y
CT_ARCH_SUPPORTS_WITH_ARCH=y
CT_ARCH_SUPPORTS_WITH_CPU=y
CT_ARCH_SUPPORTS_WITH_TUNE=y
CT_ARCH_SUPPORTS_WITH_FLOAT=y
CT_ARCH_SUPPORTS_WITH_FPU=y
CT_ARCH_SUPPORTS_SOFTFP=y
CT_ARCH_DEFAULT_HAS_MMU=y
CT_ARCH_DEFAULT_LE=y
CT_ARCH_DEFAULT_32=y
CT_ARCH_ARCH="armv6zk"
CT_ARCH_CPU="arm1176jzf-s"
CT_ARCH_TUNE="arm1176jzf-s"
CT_ARCH_FPU="vfp"
# CT_ARCH_BE is not set
CT_ARCH_LE=y
CT_ARCH_32=y
CT_ARCH_BITNESS=32
CT_ARCH_FLOAT_HW=y
# CT_ARCH_FLOAT_SW is not set
CT_TARGET_CFLAGS=""
CT_TARGET_LDFLAGS=""
CT_ARCH_arm=y
# CT_ARCH_x86 is not set
# CT_ARCH_sh is not set
# CT_ARCH_avr32 is not set
# CT_ARCH_mips is not set
# CT_ARCH_sparc is not set
# CT_ARCH_powerpc is not set
# CT_ARCH_s390 is not set
# CT_ARCH_m68k is not set
# CT_ARCH_alpha is not set
# CT_ARCH_blackfin is not set
CT_ARCH_arm_AVAILABLE=y
CT_ARCH_x86_AVAILABLE=y
CT_ARCH_sh_AVAILABLE=y
CT_ARCH_avr32_AVAILABLE=y
CT_ARCH_mips_AVAILABLE=y
CT_ARCH_sparc_AVAILABLE=y
CT_ARCH_powerpc_AVAILABLE=y
CT_ARCH_s390_AVAILABLE=y
CT_ARCH_m68k_AVAILABLE=y
CT_ARCH_alpha_AVAILABLE=y
CT_ARCH_blackfin_AVAILABLE=y

#
# Generic target options
#
# CT_MULTILIB is not set
CT_ARCH_USE_MMU=y
CT_ARCH_ENDIAN="little"

#
# Target optimisations
#
# CT_ARCH_FLOAT_SOFTFP is not set
CT_ARCH_FLOAT="hard"

#
# arm other options
#
CT_ARCH_ARM_MODE="arm"
CT_ARCH_ARM_MODE_ARM=y
# CT_ARCH_ARM_MODE_THUMB is not set
# CT_ARCH_ARM_INTERWORKING is not set
CT_ARCH_ARM_EABI=y

#
# Toolchain options
#

#
# General toolchain options
#
CT_FORCE_SYSROOT=y
CT_USE_SYSROOT=y
CT_SYSROOT_NAME="sysroot"
CT_SYSROOT_DIR_PREFIX=""
CT_WANTS_STATIC_LINK=y
# CT_STATIC_TOOLCHAIN is not set
CT_TOOLCHAIN_PKGVERSION=""
CT_TOOLCHAIN_BUGURL=""

#
# Tuple completion and aliasing
#
CT_TARGET_VENDOR="unknown"
CT_TARGET_ALIAS_SED_EXPR=""
CT_TARGET_ALIAS=""

#
# Toolchain type
#
# CT_NATIVE is not set
CT_CROSS=y
# CT_CROSS_NATIVE is not set
# CT_CANADIAN is not set
CT_TOOLCHAIN_TYPE="cross"

#
# Build system
#
CT_BUILD=""
CT_BUILD_PREFIX=""
CT_BUILD_SUFFIX=""

#
# Misc options
#
# CT_TOOLCHAIN_ENABLE_NLS is not set

#
# Operating System
#
CT_KERNEL_SUPPORTS_SHARED_LIBS=y
CT_KERNEL="linux"
CT_KERNEL_VERSION="3.2.23"
# CT_KERNEL_bare_metal is not set
CT_KERNEL_linux=y
CT_KERNEL_mingw32_AVAILABLE=y
CT_KERNEL_bare_metal_AVAILABLE=y
CT_KERNEL_linux_AVAILABLE=y
# CT_KERNEL_V_3_5 is not set
# CT_KERNEL_V_3_4_6 is not set
# CT_KERNEL_V_3_3_8 is not set
CT_KERNEL_V_3_2_23=y
# CT_KERNEL_V_3_1_10 is not set
# CT_KERNEL_V_3_0_38 is not set
# CT_KERNEL_V_2_6_39_4 is not set
# CT_KERNEL_V_2_6_38_8 is not set
# CT_KERNEL_V_2_6_37_6 is not set
# CT_KERNEL_V_2_6_36_4 is not set
# CT_KERNEL_V_2_6_33_20 is not set
# CT_KERNEL_V_2_6_32_59 is not set
# CT_KERNEL_V_2_6_31_14 is not set
# CT_KERNEL_V_2_6_27_62 is not set
# CT_KERNEL_LINUX_CUSTOM is not set

#
# Common kernel options
#
CT_SHARED_LIBS=y

#
# linux other options
#
CT_KERNEL_LINUX_VERBOSITY_0=y
# CT_KERNEL_LINUX_VERBOSITY_1 is not set
# CT_KERNEL_LINUX_VERBOSITY_2 is not set
CT_KERNEL_LINUX_VERBOSE_LEVEL=0
CT_KERNEL_LINUX_INSTALL_CHECK=y

#
# Binary utilities
#
CT_ARCH_BINFMT_ELF=y

#
# GNU binutils
#
CT_BINUTILS_V_2_22=y
# CT_BINUTILS_V_2_21_53 is not set
# CT_BINUTILS_V_2_21_1a is not set
# CT_BINUTILS_V_2_20_1a is not set
# CT_BINUTILS_V_2_19_1a is not set
# CT_BINUTILS_V_2_18a is not set
CT_BINUTILS_VERSION="2.22"
CT_BINUTILS_2_22_or_later=y
CT_BINUTILS_2_21_or_later=y
CT_BINUTILS_2_20_or_later=y
CT_BINUTILS_2_19_or_later=y
CT_BINUTILS_2_18_or_later=y
CT_BINUTILS_HAS_HASH_STYLE=y
CT_BINUTILS_HAS_GOLD=y
CT_BINUTILS_GOLD_SUPPORTS_ARCH=y
CT_BINUTILS_HAS_PLUGINS=y
CT_BINUTILS_HAS_PKGVERSION_BUGURL=y
CT_BINUTILS_FORCE_LD_BFD=y
CT_BINUTILS_LINKER_LD=y
# CT_BINUTILS_LINKER_LD_GOLD is not set
# CT_BINUTILS_LINKER_GOLD_LD is not set
CT_BINUTILS_LINKERS_LIST="ld"
CT_BINUTILS_LINKER_DEFAULT="bfd"
# CT_BINUTILS_PLUGINS is not set
CT_BINUTILS_EXTRA_CONFIG_ARRAY=""
# CT_BINUTILS_FOR_TARGET is not set

#
# C compiler
#
CT_CC="gcc"
CT_CC_VERSION="linaro-4.7-2012.07"
CT_CC_gcc=y
CT_CC_GCC_SHOW_LINARO=y
CT_CC_V_linaro_4_7_2012_07=y
# CT_CC_V_4_7_1 is not set
# CT_CC_V_4_7_0 is not set
# CT_CC_V_linaro_4_6_2012_07 is not set
# CT_CC_V_4_6_3 is not set
# CT_CC_V_4_6_2 is not set
# CT_CC_V_4_6_1 is not set
# CT_CC_V_4_6_0 is not set
# CT_CC_V_linaro_4_5_2012_03 is not set
# CT_CC_V_4_5_3 is not set
# CT_CC_V_4_5_2 is not set
# CT_CC_V_4_5_1 is not set
# CT_CC_V_4_5_0 is not set
# CT_CC_V_linaro_4_4_2011_02_0 is not set
# CT_CC_V_4_4_7 is not set
# CT_CC_V_4_4_6 is not set
# CT_CC_V_4_4_5 is not set
# CT_CC_V_4_4_4 is not set
# CT_CC_V_4_4_3 is not set
# CT_CC_V_4_4_2 is not set
# CT_CC_V_4_4_1 is not set
# CT_CC_V_4_4_0 is not set
# CT_CC_V_4_3_6 is not set
# CT_CC_V_4_3_5 is not set
# CT_CC_V_4_3_4 is not set
# CT_CC_V_4_3_3 is not set
# CT_CC_V_4_3_2 is not set
# CT_CC_V_4_3_1 is not set
# CT_CC_V_4_2_4 is not set
# CT_CC_V_4_2_2 is not set
CT_CC_GCC_4_2_or_later=y
CT_CC_GCC_4_3_or_later=y
CT_CC_GCC_4_4_or_later=y
CT_CC_GCC_4_5_or_later=y
CT_CC_GCC_4_6_or_later=y
CT_CC_GCC_4_7=y
CT_CC_GCC_4_7_or_later=y
CT_CC_GCC_HAS_GRAPHITE=y
CT_CC_GCC_HAS_LTO=y
CT_CC_GCC_HAS_PKGVERSION_BUGURL=y
CT_CC_GCC_HAS_BUILD_ID=y
CT_CC_GCC_HAS_LNK_HASH_STYLE=y
CT_CC_GCC_USE_GMP_MPFR=y
CT_CC_GCC_USE_PPL_CLOOG=y
CT_CC_GCC_USE_MPC=y
CT_CC_GCC_HAS_LIBQUADMATH=y
# CT_CC_LANG_FORTRAN is not set
CT_CC_SUPPORT_CXX=y
CT_CC_SUPPORT_FORTRAN=y
CT_CC_SUPPORT_JAVA=y
CT_CC_SUPPORT_ADA=y
CT_CC_SUPPORT_OBJC=y
CT_CC_SUPPORT_OBJCXX=y

#
# Additional supported languages:
#
CT_CC_LANG_CXX=y
# CT_CC_LANG_JAVA is not set
# CT_CC_LANG_ADA is not set
# CT_CC_LANG_OBJC is not set
# CT_CC_LANG_OBJCXX is not set
CT_CC_LANG_OTHERS=""

#
# gcc other options
#
CT_CC_ENABLE_CXX_FLAGS=""
CT_CC_CORE_EXTRA_CONFIG_ARRAY=""
CT_CC_EXTRA_CONFIG_ARRAY=""
CT_CC_STATIC_LIBSTDCXX=y
# CT_CC_GCC_SYSTEM_ZLIB is not set

#
# Optimisation features
#
CT_CC_GCC_USE_GRAPHITE=y
CT_CC_GCC_USE_LTO=y

#
# Settings for libraries running on target
#
CT_CC_GCC_ENABLE_TARGET_OPTSPACE=y
# CT_CC_GCC_LIBMUDFLAP is not set
# CT_CC_GCC_LIBGOMP is not set
# CT_CC_GCC_LIBSSP is not set
# CT_CC_GCC_LIBQUADMATH is not set

#
# Misc. obscure options.
#
CT_CC_CXA_ATEXIT=y
# CT_CC_GCC_DISABLE_PCH is not set
CT_CC_GCC_SJLJ_EXCEPTIONS=m
CT_CC_GCC_LDBL_128=m
# CT_CC_GCC_BUILD_ID is not set
CT_CC_GCC_LNK_HASH_STYLE_DEFAULT=y
# CT_CC_GCC_LNK_HASH_STYLE_SYSV is not set
# CT_CC_GCC_LNK_HASH_STYLE_GNU is not set
# CT_CC_GCC_LNK_HASH_STYLE_BOTH is not set
CT_CC_GCC_LNK_HASH_STYLE=""

#
# C-library
#
CT_LIBC="glibc"
CT_LIBC_VERSION="2.14.1"
CT_LIBC_glibc=y
# CT_LIBC_uClibc is not set
# CT_LIBC_eglibc is not set
CT_LIBC_none_AVAILABLE=y
CT_LIBC_mingw_AVAILABLE=y
CT_LIBC_glibc_AVAILABLE=y
CT_LIBC_GLIBC_TARBALL=y
CT_LIBC_GLIBC_V_2_14_1=y
# CT_LIBC_GLIBC_V_2_14 is not set
# CT_LIBC_GLIBC_V_2_13 is not set
# CT_LIBC_GLIBC_V_2_12_2 is not set
# CT_LIBC_GLIBC_V_2_12_1 is not set
# CT_LIBC_GLIBC_V_2_11_1 is not set
# CT_LIBC_GLIBC_V_2_11 is not set
# CT_LIBC_GLIBC_V_2_10_1 is not set
# CT_LIBC_GLIBC_V_2_9 is not set
# CT_LIBC_GLIBC_V_2_8 is not set
CT_LIBC_newlib_AVAILABLE=y
CT_LIBC_uClibc_AVAILABLE=y
CT_LIBC_eglibc_AVAILABLE=y
CT_LIBC_SUPPORT_THREADS_ANY=y
CT_LIBC_SUPPORT_NPTL=y
CT_THREADS="nptl"

#
# Common C library options
#
CT_THREADS_NPTL=y
CT_LIBC_XLDD=y

#
# glibc other options
#
CT_LIBC_GLIBC_MAY_FORCE_PORTS=y
CT_LIBC_glibc_familly=y
CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY=""
CT_LIBC_GLIBC_CONFIGPARMS=""
CT_LIBC_GLIBC_EXTRA_CFLAGS=""
CT_LIBC_EXTRA_CC_ARGS=""
# CT_LIBC_ENABLE_FORTIFIED_BUILD is not set
# CT_LIBC_DISABLE_VERSIONING is not set
CT_LIBC_OLDEST_ABI=""
CT_LIBC_GLIBC_FORCE_UNWIND=y
CT_LIBC_GLIBC_USE_PORTS=y
CT_LIBC_ADDONS_LIST=""

#
# WARNING !!!                                            
#

#
#   For glibc >= 2.8, it can happen that the tarballs    
#

#
#   for the addons are not available for download.       
#

#
#   If that happens, bad luck... Try a previous version  
#

#
#   or try again later... :-(                            
#
# CT_LIBC_LOCALES is not set
# CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set
CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y
# CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set
CT_LIBC_GLIBC_MIN_KERNEL="3.2.23"

#
# Debug facilities
#
# CT_DEBUG_ltrace is not set
# CT_DEBUG_gdb is not set
# CT_DEBUG_duma is not set
# CT_DEBUG_dmalloc is not set
# CT_DEBUG_strace is not set

#
# Companion libraries
#
CT_COMPLIBS_NEEDED=y
CT_GMP_NEEDED=y
CT_MPFR_NEEDED=y
CT_PPL_NEEDED=y
CT_CLOOG_NEEDED=y
CT_MPC_NEEDED=y
CT_COMPLIBS=y
CT_GMP=y
CT_MPFR=y
CT_PPL=y
CT_CLOOG=y
CT_MPC=y
CT_GMP_V_5_0_2=y
# CT_GMP_V_5_0_1 is not set
# CT_GMP_V_4_3_2 is not set
# CT_GMP_V_4_3_1 is not set
# CT_GMP_V_4_3_0 is not set
CT_GMP_VERSION="5.0.2"
CT_MPFR_V_3_1_0=y
# CT_MPFR_V_3_0_1 is not set
# CT_MPFR_V_3_0_0 is not set
# CT_MPFR_V_2_4_2 is not set
# CT_MPFR_V_2_4_1 is not set
# CT_MPFR_V_2_4_0 is not set
CT_MPFR_VERSION="3.1.0"
CT_PPL_V_0_11_2=y
# CT_PPL_V_0_11_1 is not set
# CT_PPL_V_0_11 is not set
# CT_PPL_V_0_10_2 is not set
CT_PPL_VERSION="0.11.2"
CT_PPL_0_11=y
CT_PPL_NEEDS_LIBPWL=y
CT_CLOOG_V_0_15_11=y
# CT_CLOOG_V_0_15_10 is not set
# CT_CLOOG_V_0_15_9 is not set
# CT_CLOOG_V_0_15_8 is not set
# CT_CLOOG_V_0_15_7 is not set
# CT_CLOOG_V_0_15_6 is not set
CT_CLOOG_VERSION="0.15.11"
CT_CLOOG_0_15_1x=y
CT_CLOOG_NEEDS_AUTORECONF=y
CT_MPC_V_0_9=y
# CT_MPC_V_0_8_2 is not set
# CT_MPC_V_0_8_1 is not set
# CT_MPC_V_0_7 is not set
CT_MPC_VERSION="0.9"

#
# Companion libraries common options
#
# CT_COMPLIBS_CHECK is not set

#
# Companion tools
#

#
# READ HELP before you say 'Y' below !!!
#
# CT_COMP_TOOLS is not set

#
# Test suite
#
# CT_TEST_SUITE_GCC is not set

Offline

#7 2012-08-03 16:14:27

gabx
Member
From: Geneva, Switzerland
Registered: 2011-11-20
Posts: 179
Website

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

This is a good place to start with:
http://www.bootc.net/projects/raspberry … to_install

Offline

#8 2012-08-04 17:41:19

D4ve
Member
Registered: 2012-08-02
Posts: 209

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

I've setup distcc and crosstool-ng, both are working and i can recompile the packages (compilation is done on my homeserver, really cool)

The problem is: How can i recompile the packages but do NOT install them?

Pacbuilder is a nice tool for recompilation, but theres no option to only compile without installing them. And the --export function does not work, so the packages aren't copied to the given directory (bug?)

Of course i can copy over all the PKGBUILDS from the abs-tree and compile them manually, but that takes a little bit too long.

For compiling only a few packages, this is a really good solution, but not really what i am searching for. I've learned a lot the last few days and now i know, that my initial intention was wrong.

What i really want is a completely automated toolchain for massive crosscompilation on my pc without the need of a raspberry pi. That would be great.

I don't know how easy this can be achieved or how much time this will take to setup the whole thing, but if you or anyone other has some information how to start, it would be great if you (or anyone other) can share it with me smile

Offline

#9 2012-08-15 14:35:09

D4ve
Member
Registered: 2012-08-02
Posts: 209

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

Since a few days i'm searching for a solution of an error, that still affects 90% of the PKGBUILDS: Configure Error 77, "Cannot create executeables".

I don't know what i'm doing wrong. Base-devel (including binutils, gcc and fakeroot) ist installed on both machines (RaspberryPi, PC) and it still doesn't work.

90% of the packages can't be build because of this error.

Any idea?

EDIT: For testing purposes i compiled a "Hello World" and it worked => gcc is ok smile

Last edited by D4ve (2012-08-17 14:03:44)

Offline

#10 2012-09-19 14:46:59

WarheadsSE
Member
From: EST, US
Registered: 2012-04-18
Posts: 8
Website

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

Just a notice:

http://archlinuxarm.org/article/2012091 … -rpi-image

Developer @ Arch Linux | ARM

Offline

#11 2012-09-19 15:17:26

D4ve
Member
Registered: 2012-08-02
Posts: 209

Re: [Solved (more or less)] Rebuild the RaspberryPi Image

WarheadsSE wrote:

Cool, thanks.

Offline

Pages: 1

Board footer

Powered by FluxBB