You are not logged in.

#1 2012-09-25 19:06:16

enos
Member
Registered: 2012-09-25
Posts: 5

Problem with nvidia

Hello guys, i'm new to arch linux. I hope this is the right place for this topic..I am a slackware user for many years and i decided to let slackware on my server and go on with arch on desktop. I have a problem with nvidia's performance.My card is gt440 (01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 440] (rev a1)  ) . On slackware 13.37 i use the 295.33 driver and it runs flawlessly. Here in arch i  used the default nvidia package (nvidia,  nvidia-utils etc) means 304.51, and i noticed very poor performance, for example i play Heroes Of Newerth on slackware with all settings in high (i tested the same settings on arch) it runs without any problem! Here it stucks, i cant even move the cursor..With lower graphics it runs but it stucks sometimes. With compiz i don't have any problems.I used also dkms-nvidia-beta from aur but still the same result. Direct rendering : yes, glxgears --> 300 frames! On slackware i have 49480 frames meaning 9880.84 fps! I know that glxgears isn't a benchmark. I also noticed one more difference, on slack my refresh rate is 50 Hz but here in arch is 60Hz... I don't know if this has something to do, i changed it from xorg to 50 Hz but still nothing happened. I tried to downgrade to 295.33 but i couldn't satisfy all the dependencies...I tried to install the driver itself from nvidia website (xxx.run) but i had an error saying "can't build kernel module". So i am here, stuck and praying to find an answer through the googling. If someone knows, has or had the same problems please let me know. Thanks in advance and sorry for my english, it's not my native lang. I'll post you some info.

Linux archer 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux



My xorg:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 304.51  (buildmeister@swio-display-x86-rhel47-08.nvidia.com)  Tue Sep 18 18:26:36 PDT 2012


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "metamodes" "1920x1080_50 +0+0; nvidia-auto-select +0+0"
    Option         "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3322; PowerMizerDefaultAC=0x1"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Last edited by enos (2012-09-26 18:17:21)

Offline

#2 2012-09-25 19:40:22

brebs
Member
Registered: 2007-04-03
Posts: 3,401

Re: Problem with nvidia

Check /var/log/Xorg.0.log for errors and warnings.

Offline

#3 2012-09-25 19:40:57

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,346
Website

Re: Problem with nvidia

You shouldn't need an xorg.conf at all.  If you wish to use a lower version of the nvidia driver, simply build one using ABS (see wiki).  The PKGBUILD will have you download the kernel-headers package which is why your manual build likely failed.  Also, don't build stuff manually; always use a PKGBUILD.

Welcomed to Arch.

Last edited by graysky (2012-09-25 19:42:06)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#4 2012-09-25 19:53:16

enos
Member
Registered: 2012-09-25
Posts: 5

Re: Problem with nvidia

Thank you guys for the answers!First i checked the Xorg.0.log and i can't find something strange.

[    15.109] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    15.109] X Protocol Version 11, Revision 0
[    15.109] Build Operating System: Linux 3.4.8-1-ARCH x86_64 
[    15.109] Current Operating System: Linux archer 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
[    15.109] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0367e0ad-dacb-4deb-bf5d-8043d945251e ro quiet
[    15.109] Build Date: 27 August 2012  08:04:39AM
[    15.109]  
[    15.109] Current version of pixman: 0.26.2
[    15.109] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    15.109] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.109] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 25 22:46:13 2012
[    15.143] (==) Using config file: "/etc/X11/xorg.conf"
[    15.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.168] (==) ServerLayout "Layout0"
[    15.168] (**) |-->Screen "Screen0" (0)
[    15.168] (**) |   |-->Monitor "Monitor0"
[    15.168] (**) |   |-->Device "Device0"
[    15.168] (**) |-->Input Device "Keyboard0"
[    15.168] (**) |-->Input Device "Mouse0"
[    15.168] (==) Automatically adding devices
[    15.168] (==) Automatically enabling devices
[    15.207] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    15.207] 	Entry deleted from font path.
[    15.207] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    15.207] 	Entry deleted from font path.
[    15.207] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.207] 	Entry deleted from font path.
[    15.207] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.208] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.208] 	Entry deleted from font path.
[    15.208] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.208] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    15.208] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.208] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.208] (WW) Disabling Keyboard0
[    15.208] (WW) Disabling Mouse0
[    15.208] (II) Loader magic: 0x7c8b00
[    15.208] (II) Module ABI versions:
[    15.208] 	X.Org ANSI C Emulation: 0.4
[    15.208] 	X.Org Video Driver: 12.1
[    15.208] 	X.Org XInput driver : 16.0
[    15.208] 	X.Org Server Extension : 6.0
[    15.208] (--) PCI:*(0:1:0:0) 10de:0de0:1458:3517 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[    15.209] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    15.209] (II) LoadModule: "extmod"
[    15.209] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    15.218] (II) Module extmod: vendor="X.Org Foundation"
[    15.218] 	compiled for 1.12.4, module version = 1.0.0
[    15.218] 	Module class: X.Org Server Extension
[    15.218] 	ABI class: X.Org Server Extension, version 6.0
[    15.218] (II) Loading extension MIT-SCREEN-SAVER
[    15.218] (II) Loading extension XFree86-VidModeExtension
[    15.218] (II) Loading extension XFree86-DGA
[    15.218] (II) Loading extension DPMS
[    15.218] (II) Loading extension XVideo
[    15.218] (II) Loading extension XVideo-MotionCompensation
[    15.218] (II) Loading extension X-Resource
[    15.218] (II) LoadModule: "dbe"
[    15.218] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    15.225] (II) Module dbe: vendor="X.Org Foundation"
[    15.225] 	compiled for 1.12.4, module version = 1.0.0
[    15.225] 	Module class: X.Org Server Extension
[    15.225] 	ABI class: X.Org Server Extension, version 6.0
[    15.225] (II) Loading extension DOUBLE-BUFFER
[    15.225] (II) LoadModule: "glx"
[    15.238] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.760] (II) Module glx: vendor="NVIDIA Corporation"
[    15.760] 	compiled for 4.0.2, module version = 1.0.0
[    15.760] 	Module class: X.Org Server Extension
[    15.760] (II) NVIDIA GLX Module  304.51  Tue Sep 18 17:38:06 PDT 2012
[    15.760] (II) Loading extension GLX
[    15.760] (II) LoadModule: "record"
[    15.760] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    15.776] (II) Module record: vendor="X.Org Foundation"
[    15.776] 	compiled for 1.12.4, module version = 1.13.0
[    15.776] 	Module class: X.Org Server Extension
[    15.776] 	ABI class: X.Org Server Extension, version 6.0
[    15.776] (II) Loading extension RECORD
[    15.776] (II) LoadModule: "dri"
[    15.776] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    15.783] (II) Module dri: vendor="X.Org Foundation"
[    15.783] 	compiled for 1.12.4, module version = 1.0.0
[    15.783] 	ABI class: X.Org Server Extension, version 6.0
[    15.783] (II) Loading extension XFree86-DRI
[    15.783] (II) LoadModule: "dri2"
[    15.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    15.784] (II) Module dri2: vendor="X.Org Foundation"
[    15.784] 	compiled for 1.12.4, module version = 1.2.0
[    15.784] 	ABI class: X.Org Server Extension, version 6.0
[    15.784] (II) Loading extension DRI2
[    15.784] (II) LoadModule: "nvidia"
[    15.796] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    15.857] (II) Module nvidia: vendor="NVIDIA Corporation"
[    15.857] 	compiled for 4.0.2, module version = 1.0.0
[    15.857] 	Module class: X.Org Video Driver
[    15.870] (II) NVIDIA dlloader X Driver  304.51  Tue Sep 18 17:18:40 PDT 2012
[    15.870] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    15.871] (++) using VT number 7

[    15.945] (II) Loading sub module "fb"
[    15.945] (II) LoadModule: "fb"
[    15.945] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.954] (II) Module fb: vendor="X.Org Foundation"
[    15.954] 	compiled for 1.12.4, module version = 1.0.0
[    15.954] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.954] (II) Loading sub module "wfb"
[    15.954] (II) LoadModule: "wfb"
[    15.955] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    15.957] (II) Module wfb: vendor="X.Org Foundation"
[    15.957] 	compiled for 1.12.4, module version = 1.0.0
[    15.957] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.957] (II) Loading sub module "ramdac"
[    15.957] (II) LoadModule: "ramdac"
[    15.957] (II) Module "ramdac" already built-in
[    15.960] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    15.960] (==) NVIDIA(0): RGB weight 888
[    15.960] (==) NVIDIA(0): Default visual is TrueColor
[    15.960] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.960] (**) NVIDIA(0): Option "Stereo" "0"
[    15.960] (**) NVIDIA(0): Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x3322; PowerMizerDefaultAC=0x1"
[    15.960] (**) NVIDIA(0): Stereo disabled by request
[    15.960] (**) NVIDIA(0): Option "MetaModes" "1920x1080_50 +0+0; nvidia-auto-select +0+0"
[    15.960] (**) NVIDIA(0): Enabling 2D acceleration
[    16.762] (II) NVIDIA(GPU-0): Display (HP 2311 (DFP-0)) does not support NVIDIA 3D Vision
[    16.762] (II) NVIDIA(GPU-0):     stereo.
[    16.763] (II) NVIDIA(0): NVIDIA GPU GeForce GT 440 (GF108) at PCI:1:0:0 (GPU-0)
[    16.763] (--) NVIDIA(0): Memory: 1048576 kBytes
[    16.763] (--) NVIDIA(0): VideoBIOS: 70.08.45.00.01
[    16.763] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    16.763] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    16.765] (--) NVIDIA(0): Valid display device(s) on GeForce GT 440 at PCI:1:0:0
[    16.765] (--) NVIDIA(0):     CRT-0
[    16.765] (--) NVIDIA(0):     CRT-1
[    16.765] (--) NVIDIA(0):     HP 2311 (DFP-0) (connected)
[    16.765] (--) NVIDIA(0):     DFP-1
[    16.765] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    16.765] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    16.765] (--) NVIDIA(0): HP 2311 (DFP-0): 330.0 MHz maximum pixel clock
[    16.765] (--) NVIDIA(0): HP 2311 (DFP-0): Internal Dual Link TMDS
[    16.765] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    16.765] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    16.765] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    16.765] (**) NVIDIA(0):     device HP 2311 (DFP-0) (Using EDID frequencies has been
[    16.765] (**) NVIDIA(0):     enabled on all display devices.)
[    16.765] (WW) NVIDIA(0): No valid modes for "1920x1080_50+0+0"; removing.
[    16.765] (II) NVIDIA(0): Validated MetaModes:
[    16.765] (II) NVIDIA(0):     "nvidia-auto-select+0+0"
[    16.765] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    16.794] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    16.794] (--) NVIDIA(0):     option
[    16.794] (--) Depth 24 pixmap format is 32 bpp
[    16.794] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    16.794] (II) NVIDIA:     access.
[    16.796] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    16.796] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    16.796] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    16.796] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    16.796] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    16.796] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    16.796] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    16.796] (II) NVIDIA(0):     Config Options in the README.
[    16.798] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
[    16.834] (II) Loading extension NV-GLX
[    16.901] (==) NVIDIA(0): Disabling shared memory pixmaps
[    16.901] (==) NVIDIA(0): Backing store disabled
[    16.901] (==) NVIDIA(0): Silken mouse enabled
[    16.901] (**) NVIDIA(0): DPMS enabled
[    16.901] (II) Loading extension NV-CONTROL
[    16.901] (II) Loading extension XINERAMA
[    16.901] (II) Loading sub module "dri2"
[    16.901] (II) LoadModule: "dri2"
[    16.901] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.901] (II) Module dri2: vendor="X.Org Foundation"
[    16.901] 	compiled for 1.12.4, module version = 1.2.0
[    16.901] 	ABI class: X.Org Server Extension, version 6.0
[    16.901] (II) NVIDIA(0): [DRI2] Setup complete
[    16.901] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    16.901] (--) RandR disabled
[    16.901] (II) Initializing built-in extension Generic Event Extension
[    16.901] (II) Initializing built-in extension SHAPE
[    16.901] (II) Initializing built-in extension MIT-SHM
[    16.901] (II) Initializing built-in extension XInputExtension
[    16.901] (II) Initializing built-in extension XTEST
[    16.901] (II) Initializing built-in extension BIG-REQUESTS
[    16.901] (II) Initializing built-in extension SYNC
[    16.901] (II) Initializing built-in extension XKEYBOARD
[    16.901] (II) Initializing built-in extension XC-MISC
[    16.901] (II) Initializing built-in extension SECURITY
[    16.901] (II) Initializing built-in extension XINERAMA
[    16.901] (II) Initializing built-in extension XFIXES
[    16.901] (II) Initializing built-in extension RENDER
[    16.901] (II) Initializing built-in extension RANDR
[    16.901] (II) Initializing built-in extension COMPOSITE
[    16.901] (II) Initializing built-in extension DAMAGE
[    16.902] (II) Initializing extension GLX
[    17.202] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    17.202] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.202] (II) LoadModule: "evdev"
[    17.203] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.215] (II) Module evdev: vendor="X.Org Foundation"
[    17.215] 	compiled for 1.12.3.901, module version = 2.7.3
[    17.215] 	Module class: X.Org XInput Driver
[    17.215] 	ABI class: X.Org XInput driver, version 16.0
[    17.215] (II) Using input driver 'evdev' for 'Power Button'
[    17.215] (**) Power Button: always reports core events
[    17.215] (**) evdev: Power Button: Device: "/dev/input/event1"
[    17.215] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.215] (--) evdev: Power Button: Found keys
[    17.215] (II) evdev: Power Button: Configuring as keyboard
[    17.215] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    17.215] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    17.216] (**) Option "xkb_rules" "evdev"
[    17.216] (**) Option "xkb_model" "evdev"
[    17.216] (**) Option "xkb_layout" "us"
[    17.234] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    17.234] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    17.234] (II) Using input driver 'evdev' for 'Power Button'
[    17.234] (**) Power Button: always reports core events
[    17.234] (**) evdev: Power Button: Device: "/dev/input/event0"
[    17.234] (--) evdev: Power Button: Vendor 0 Product 0x1
[    17.234] (--) evdev: Power Button: Found keys
[    17.234] (II) evdev: Power Button: Configuring as keyboard
[    17.234] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    17.234] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    17.234] (**) Option "xkb_rules" "evdev"
[    17.234] (**) Option "xkb_model" "evdev"
[    17.234] (**) Option "xkb_layout" "us"
[    17.234] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event17)
[    17.234] (II) No input driver specified, ignoring this device.
[    17.234] (II) This device may have been added with another device file.
[    17.234] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[    17.234] (II) No input driver specified, ignoring this device.
[    17.234] (II) This device may have been added with another device file.
[    17.234] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[    17.234] (II) No input driver specified, ignoring this device.
[    17.234] (II) This device may have been added with another device file.
[    17.234] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event20)
[    17.234] (II) No input driver specified, ignoring this device.
[    17.234] (II) This device may have been added with another device file.
[    17.234] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
[    17.234] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event3)
[    17.235] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event4)
[    17.235] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[    17.235] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
[    17.235] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event7)
[    17.235] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event8)
[    17.235] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[    17.235] (II) No input driver specified, ignoring this device.
[    17.235] (II) This device may have been added with another device file.
[    17.235] (II) config/udev: Adding input device UVC Camera (046d:0825) (/dev/input/event22)
[    17.235] (**) UVC Camera (046d:0825): Applying InputClass "evdev keyboard catchall"
[    17.235] (II) Using input driver 'evdev' for 'UVC Camera (046d:0825)'
[    17.235] (**) UVC Camera (046d:0825): always reports core events
[    17.235] (**) evdev: UVC Camera (046d:0825): Device: "/dev/input/event22"
[    17.235] (--) evdev: UVC Camera (046d:0825): Vendor 0x46d Product 0x825
[    17.235] (--) evdev: UVC Camera (046d:0825): Found keys
[    17.235] (II) evdev: UVC Camera (046d:0825): Configuring as keyboard
[    17.235] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input22/event22"
[    17.235] (II) XINPUT: Adding extended input device "UVC Camera (046d:0825)" (type: KEYBOARD, id 8)
[    17.236] (**) Option "xkb_rules" "evdev"
[    17.236] (**) Option "xkb_model" "evdev"
[    17.236] (**) Option "xkb_layout" "us"
[    17.236] (II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event21)
[    17.236] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall"
[    17.236] (II) Using input driver 'evdev' for 'IR-receiver inside an USB DVB receiver'
[    17.236] (**) IR-receiver inside an USB DVB receiver: always reports core events
[    17.236] (**) evdev: IR-receiver inside an USB DVB receiver: Device: "/dev/input/event21"
[    17.236] (--) evdev: IR-receiver inside an USB DVB receiver: Vendor 0xb05 Product 0x173f
[    17.236] (--) evdev: IR-receiver inside an USB DVB receiver: Found keys
[    17.236] (II) evdev: IR-receiver inside an USB DVB receiver: Configuring as keyboard
[    17.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.4/rc/rc0/input21/event21"
[    17.236] (II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD, id 9)
[    17.236] (**) Option "xkb_rules" "evdev"
[    17.236] (**) Option "xkb_model" "evdev"
[    17.236] (**) Option "xkb_layout" "us"
[    17.236] (II) config/udev: Adding input device HID 13ec:0024 (/dev/input/event14)
[    17.236] (**) HID 13ec:0024: Applying InputClass "evdev keyboard catchall"
[    17.236] (II) Using input driver 'evdev' for 'HID 13ec:0024'
[    17.236] (**) HID 13ec:0024: always reports core events
[    17.236] (**) evdev: HID 13ec:0024: Device: "/dev/input/event14"
[    17.236] (--) evdev: HID 13ec:0024: Vendor 0x13ec Product 0x24
[    17.236] (--) evdev: HID 13ec:0024: Found keys
[    17.236] (II) evdev: HID 13ec:0024: Configuring as keyboard
[    17.236] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.0/input/input14/event14"
[    17.236] (II) XINPUT: Adding extended input device "HID 13ec:0024" (type: KEYBOARD, id 10)
[    17.236] (**) Option "xkb_rules" "evdev"
[    17.236] (**) Option "xkb_model" "evdev"
[    17.236] (**) Option "xkb_layout" "us"
[    17.237] (II) config/udev: Adding input device HID 13ec:0024 (/dev/input/event15)
[    17.237] (**) HID 13ec:0024: Applying InputClass "evdev pointer catchall"
[    17.237] (II) Using input driver 'evdev' for 'HID 13ec:0024'
[    17.237] (**) HID 13ec:0024: always reports core events
[    17.237] (**) evdev: HID 13ec:0024: Device: "/dev/input/event15"
[    17.237] (--) evdev: HID 13ec:0024: Vendor 0x13ec Product 0x24
[    17.237] (--) evdev: HID 13ec:0024: Found 3 mouse buttons
[    17.237] (--) evdev: HID 13ec:0024: Found relative axes
[    17.237] (--) evdev: HID 13ec:0024: Found x and y relative axes
[    17.237] (II) evdev: HID 13ec:0024: Configuring as mouse
[    17.237] (**) evdev: HID 13ec:0024: YAxisMapping: buttons 4 and 5
[    17.237] (**) evdev: HID 13ec:0024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.237] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.1/4-1.5.1:1.1/input/input15/event15"
[    17.237] (II) XINPUT: Adding extended input device "HID 13ec:0024" (type: MOUSE, id 11)
[    17.237] (II) evdev: HID 13ec:0024: initialized for relative axes.
[    17.237] (**) HID 13ec:0024: (accel) keeping acceleration scheme 1
[    17.237] (**) HID 13ec:0024: (accel) acceleration profile 0
[    17.237] (**) HID 13ec:0024: (accel) acceleration factor: 2.000
[    17.237] (**) HID 13ec:0024: (accel) acceleration threshold: 4
[    17.238] (II) config/udev: Adding input device HID 13ec:0024 (/dev/input/mouse0)
[    17.238] (II) No input driver specified, ignoring this device.
[    17.238] (II) This device may have been added with another device file.
[    17.238] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event16)
[    17.238] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    17.238] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    17.238] (**) Logitech USB Optical Mouse: always reports core events
[    17.238] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event16"
[    17.238] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[    17.238] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[    17.238] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    17.238] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    17.238] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    17.238] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    17.238] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    17.238] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    17.238] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.238] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5.4/4-1.5.4:1.0/input/input16/event16"
[    17.238] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 12)
[    17.238] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    17.238] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    17.239] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    17.239] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    17.239] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    17.239] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[    17.239] (II) No input driver specified, ignoring this device.
[    17.239] (II) This device may have been added with another device file.
[    17.239] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event12)
[    17.239] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[    17.239] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[    17.239] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[    17.239] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event12"
[    17.239] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[    17.239] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[    17.239] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[    17.239] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input12/event12"
[    17.239] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 13)
[    17.239] (**) Option "xkb_rules" "evdev"
[    17.239] (**) Option "xkb_model" "evdev"
[    17.239] (**) Option "xkb_layout" "us"
[    17.240] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event13)
[    17.240] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[    17.240] (II) Using input driver 'evdev' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[    17.240] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[    17.240] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Device: "/dev/input/event13"
[    17.240] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Vendor 0x45e Product 0xdb
[    17.240] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found 1 mouse buttons
[    17.240] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found scroll wheel(s)
[    17.240] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found relative axes
[    17.240] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing relative x/y axes to exist.
[    17.240] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found absolute axes
[    17.240] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Forcing absolute x/y axes to exist.
[    17.240] (--) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Found keys
[    17.240] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as mouse
[    17.240] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Configuring as keyboard
[    17.240] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: Adding scrollwheel support
[    17.240] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: YAxisMapping: buttons 4 and 5
[    17.240] (**) evdev: Microsoft Natural® Ergonomic Keyboard 4000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    17.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.1/input/input13/event13"
[    17.240] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 14)
[    17.240] (**) Option "xkb_rules" "evdev"
[    17.240] (**) Option "xkb_model" "evdev"
[    17.240] (**) Option "xkb_layout" "us"
[    17.241] (II) evdev: Microsoft Natural® Ergonomic Keyboard 4000: initialized for relative axes.
[    17.241] (WW) evdev: Microsoft Natural® Ergonomic Keyboard 4000: ignoring absolute axes.
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) keeping acceleration scheme 1
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration profile 0
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[    17.241] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[    17.241] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event11)
[    17.241] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    17.241] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    17.241] (**) Eee PC WMI hotkeys: always reports core events
[    17.241] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event11"
[    17.241] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    17.241] (--) evdev: Eee PC WMI hotkeys: Found keys
[    17.241] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    17.241] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input11/event11"
[    17.241] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 15)
[    17.241] (**) Option "xkb_rules" "evdev"
[    17.241] (**) Option "xkb_model" "evdev"
[    17.241] (**) Option "xkb_layout" "us"
[    17.242] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    17.242] (II) No input driver specified, ignoring this device.
[    17.242] (II) This device may have been added with another device file.
[    47.617] (II) NVIDIA(GPU-0): Display (HP 2311 (DFP-0)) does not support NVIDIA 3D Vision
[    47.617] (II) NVIDIA(GPU-0):     stereo.
[    47.617] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    47.617] (**) NVIDIA(0):     device HP 2311 (DFP-0) (Using EDID frequencies has been
[    47.617] (**) NVIDIA(0):     enabled on all display devices.)

I tried to build a lower version of the driver with abs.. i took the PKGBUILD from the current driver, i changed the variable pkgver to 295.33 of nvidia but i have the following error
> Missing Dependencies:
  -> nvidia-utils=295.33
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.

I might need to study more the abs thing... By the way, i'm used to build things manually (slackware) smile  Now i need to forget "bad" habits smile

Last edited by enos (2012-09-26 18:17:51)

Offline

#5 2012-09-25 19:55:38

enos
Member
Registered: 2012-09-25
Posts: 5

Re: Problem with nvidia

Guys now i saw this
Warning: The proprietary NVIDIA drivers do NOT work with EFI systems. You must run BIOS to use them.
I have an EFI system but what exactly i am supposed to do???

Offline

#6 2012-09-25 20:17:46

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,346
Website

Re: Problem with nvidia

@OP - Dude, please use code tags when you post code.

[
code
]


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#7 2012-09-25 20:19:01

enos
Member
Registered: 2012-09-25
Posts: 5

Re: Problem with nvidia

Ok sorry for that

Offline

#8 2012-09-26 12:40:41

saedelaere
Member
Registered: 2009-04-24
Posts: 29

Re: Problem with nvidia

Same performance Problems with latest Nvidia drivers sad

Don't know what NVidia does recently. I think we simply have to wait until they release a newer version or try to downgrade

Offline

#9 2012-09-26 12:49:22

saedelaere
Member
Registered: 2009-04-24
Posts: 29

Re: Problem with nvidia

Confirmed, downgraded to nvidia 304.43-2 and everything is OK again...

Offline

#10 2012-09-26 12:53:48

enos
Member
Registered: 2012-09-25
Posts: 5

Re: Problem with nvidia

I downgraded to nvidia 295.33 (as my slackware's version) and everything is ok!!!it runs even better! Do you think i should downgrade to 304.43-2??? Thank you for your answers anyway!!!

Offline

#11 2012-09-26 15:33:29

Strike0
Member
From: Germany
Registered: 2011-09-05
Posts: 1,277

Re: Problem with nvidia

enos wrote:

Ok sorry for that

It would be nice, if you don't just be sorry but also change your terminal/log output into [ code ] tags in the above posts. To do that, you find an "edit" link in the bottom left of each post. A link with info on BBCode tags is under each input box - have a look!

Offline

Board footer

Powered by FluxBB