You are not logged in.
Pages: 1
Hi, I got a new 2TB HDD recently (new, not eBay new)
While trying to install arch on it, I keep getting errors every few seconds accompanied by a squeak from the hard drive. I have tried both GPT and MBR in the unlikely case that made a difference
Smartctl says the drive is fine
[ 2002.424129] ata2: exception from Emask 0x10 SAct 0x0 SErr 0x1910000 action 0xe frozen
[ 2002.424274] ata2: irq_stat 0x00400000, PHY RDY changed
[ 2002.424470] ata2: Serror: { PHYRdyChg dispar LinkSeq TrStaTrna }
Is my drive failing? If they're harmless (the noise implies they're not) can I suppress them?
Last edited by mshenrick (2012-10-14 11:41:04)
Offline
Have you tried running a self test with smartctl?
#smartctl -t short /dev/sdX
Then after several minutes run
#smartctl -x /dev/sdX
To view the log. You may have to review the data as some of it isn't clearly defined for
What's good or bad whereas other entries are easily understood(google is you're best friend on understanding those entries). It may be a faulty drive but I'm not jumping to conclusions I've had some make weird clicking noises from the head being parked way to often and setting power management with hdparm fixed it(that was laptop related though I'm assuming this is a desktop implied by having a 2tb drive.) Post that if there's anything that seems bad (particularly what falls underneath ATTRIBUTE_NAME but keep in mind that smartdata on drives is to be taken with a grain of salt. I've seen some fail that tested fine and other's report real info related to a predictable failure. In one recent case I've had smartctl unable to complete any
tests on a drive that had that feature and it was obviously failing due to other observable issues. Another possibility is looking into how it's recognized and configured in your BIOS as on rare occasions it may not be auto detected (ide/sata ahci etc..) properly or it's configured wrong as a result of auto detection (unlikely to be the case though).
"Hidden are the ways for those who pass by, for light is perished and darkness comes into being." Nephthys:
Ancient Egyptian Coffin Texts
Offline
Noise = bad; RMA the new drive while still in your 30-day return period to make sure you receive a NEW replacement....
SMART is not very smart for diagnosing all problems. Look to see how many Reallocated_Sector_Ct you have for the drive via:
% sudo smartctl --all /dev/sdX | grep alloc
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
Should be 0.
Last edited by graysky (2012-10-14 10:07:38)
CPU-optimized Linux-ck packages @ Repo-ck • AUR packages • Zsh and other configs
Offline
Current_Pending_Sector and Offline_Uncorrectable should also be zero, although these do not imply a serious problem and might be easy to fix they mean something went wrong and will affect how the drive works until they are fixed.
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline
I've tried smartctl again and got no errors. And graysky's and rookie's test passed
I haven't got any errors on the ctrl+alt+fX consoles or heard any noises while on the actual system, the problem seemed to be limited to the live CD
I guess I'll never know why it was doing that, but it seems to be fixed, I think
Offline
The noise coming from the HDD is bad and will get worse over time. Make 100 % sure you are happy.
CPU-optimized Linux-ck packages @ Repo-ck • AUR packages • Zsh and other configs
Offline
Pages: 1