You are not logged in.

#1 2012-10-05 00:40:33

pouar
Member
Registered: 2011-11-03
Posts: 55
Website

fast tsc calibration failed after upgrade to linux 3.6

I get the error "Fast TSC calibration failed" on the screen after upgrading to linux 3.6, is this a new bug or something stupid I did on my end. (yeah, I know it's in testing which is why I'm trying it now to find any issues)


Yep, I'm a diaperfur now, I guess

while :;do if windows sucks;then mv windows /dev/null;pacman -Sy linux;fi;done
for i in {\ metal,core,grind};do echo death$i rules\!;done

Offline

#2 2012-10-10 11:28:24

hussam
Member
Registered: 2006-03-26
Posts: 572
Website

Re: fast tsc calibration failed after upgrade to linux 3.6

I get the same message here so it's not something on your end.

Offline

#3 2012-10-10 17:35:49

pouar
Member
Registered: 2011-11-03
Posts: 55
Website

Re: fast tsc calibration failed after upgrade to linux 3.6

It might not be an error
https://lkml.org/lkml/2012/9/24/221

Last edited by pouar (2012-10-10 17:36:17)


Yep, I'm a diaperfur now, I guess

while :;do if windows sucks;then mv windows /dev/null;pacman -Sy linux;fi;done
for i in {\ metal,core,grind};do echo death$i rules\!;done

Offline

#4 2012-10-10 17:43:58

DarkCerberus
Banned
From: Holsworthy, Devon
Registered: 2011-12-31
Posts: 252

Re: fast tsc calibration failed after upgrade to linux 3.6

If you have x86 (i.e i686) installed - then here, found this on the web https://lkml.org/lkml/2012/9/26/131 - it seems to indicate a patch for the error message.


Our enemies are your enemies, Nick. Disorder, war. It's just a matter of time before a dirty bomb goes off in Moscow, or an EMP fries Chicago.  ---  Alexander Pierce, Captain America: Winter Soldier
Access Denied! De-cryption failed, override denied all files sealed! --- Triskelion, Shield OS
-----
How to ask questions the smart way

Offline

#5 2012-10-15 16:24:59

Kilzool
Member
From: Ireland
Registered: 2010-08-04
Posts: 232

Re: fast tsc calibration failed after upgrade to linux 3.6

Update:

I did get this same error, after upgrading:  upgraded linux (3.5.6-1 -> 3.6.2-1)

And yes, I use i686.

It appeared once or maybe twice, then stopped showing (on the boot screen).
However, it still appears in the journalctl log now.

Last edited by Kilzool (2012-10-18 14:49:24)

Offline

#6 2012-10-15 18:07:08

rasertux
Member
From: Florianópolis, Brazil
Registered: 2012-03-03
Posts: 46

Re: fast tsc calibration failed after upgrade to linux 3.6

I have the same error and i use Arch x86_64...

tsc: Fast TSC calibration failed

[drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value

the 2 errors apears after i update the kernel to 3.6.2...


Sorry for my english

Offline

#7 2012-10-17 00:14:56

Potomac
Member
Registered: 2011-12-25
Posts: 526

Re: fast tsc calibration failed after upgrade to linux 3.6

tsc: Fast TSC calibration failed

same error in virtualbox 4.2.0 with archlinux 32 bits

Last edited by Potomac (2012-10-17 00:16:20)

Offline

#8 2012-10-18 10:20:30

kicka
Member
From: Sicily / Italy
Registered: 2012-10-18
Posts: 24

Re: fast tsc calibration failed after upgrade to linux 3.6

Same Error here with arch 64 bits after upgrading from kernel 3.5.6 to 3.6.2

Have I need to start worry or is just some warning i could live with?

Furthermore... there is any solution to fix this or we have to wait for the next kernel release?

Sorry for my bad english

Offline

#9 2012-10-18 10:37:48

sano
Member
Registered: 2012-02-11
Posts: 114

Re: fast tsc calibration failed after upgrade to linux 3.6

I had this warning during one or two boots after upgrading to 3.6.2(-ck), it didn't show up since. I don't think I changed anything, neither was there any update I could think of affecting this.
Running x86_64.

Offline

#10 2012-10-18 10:59:53

proudzhu
Member
Registered: 2012-09-13
Posts: 17

Re: fast tsc calibration failed after upgrade to linux 3.6

sano wrote:

I had this warning during one or two boots after upgrading to 3.6.2(-ck), it didn't show up since. I don't think I changed anything, neither was there any update I could think of affecting this.
Running x86_64.

Me too.But running i686.

Offline

#11 2012-10-19 08:50:02

rix
Member
Registered: 2012-07-25
Posts: 238

Re: fast tsc calibration failed after upgrade to linux 3.6

[drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value

Here too with x86 and 3.6.2-1-ARCH.

Last edited by rix (2012-10-19 08:52:45)

Offline

#12 2012-10-21 13:42:28

arthdo
Member
Registered: 2012-10-21
Posts: 1

Re: fast tsc calibration failed after upgrade to linux 3.6

just wondering, is any of you using SSD ? wondering if it has anything to do with SSD as the OS disk.

Offline

#13 2012-10-21 13:53:01

pouar
Member
Registered: 2011-11-03
Posts: 55
Website

Re: fast tsc calibration failed after upgrade to linux 3.6

arthdo wrote:

just wondering, is any of you using SSD ? wondering if it has anything to do with SSD as the OS disk.

if you mean the "Fast TSC calibration failed" error, no. the "Failed to get maximum backlight value" I'm not getting so I assumed it's not related to the previous error


Yep, I'm a diaperfur now, I guess

while :;do if windows sucks;then mv windows /dev/null;pacman -Sy linux;fi;done
for i in {\ metal,core,grind};do echo death$i rules\!;done

Offline

#14 2012-10-21 17:34:13

Invie
Member
From: Carnage, Destruction USA
Registered: 2012-09-08
Posts: 70

Re: fast tsc calibration failed after upgrade to linux 3.6

This also occured for me, and it seems like it is the current linux Kernel after an update, but I don't seem to be able to rollback because it isn't listed amongst /var/cache/pacman/pkg.

This is the output of ls:

# cd /var/cache/pacman/pkg/; ls | grep linux
archlinux-keyring-20120915-1-any.pkg.tar.xz
linux-3.6.2-1-i686.pkg.tar.xz
linux-api-headers-3.5.5-1-i686.pkg.tar.xz
linux-firmware-20120625-1-any.pkg.tar.xz
util-linux-2.22.1-1-i686.pkg.tar.xz

So downgrading is out of the question as far as getting the old Kernel, unless I want to reinstall the entire system as the Wiki suggests, in an instance where it would be too problematic.

If I wasn't stealing internet, I would reinstall the system and keep my /dev/sda3 (home partition). Now I'm seeing if I can google the original 3.6.1 linux kernel, though I doubt it will work if I do not have the same one as was listed on the arch system prior to this disaster.

Last edited by Invie (2012-10-21 17:36:47)


Just living is not enough... one must have sunshine, freedom, and a little flower.  ~Hans Christian Andersen

Offline

#15 2012-10-21 17:51:14

pouar
Member
Registered: 2011-11-03
Posts: 55
Website

Re: fast tsc calibration failed after upgrade to linux 3.6

Invie wrote:

but I don't seem to be able to rollback because it isn't listed amongst /var/cache/pacman/pkg.

what's wrong with:
http://arm.konnichi.com/2012/10/15/core … pkg.tar.xz
http://arm.konnichi.com/2012/10/15/core … pkg.tar.xz
http://arm.konnichi.com/2012/10/15/core … pkg.tar.xz


Yep, I'm a diaperfur now, I guess

while :;do if windows sucks;then mv windows /dev/null;pacman -Sy linux;fi;done
for i in {\ metal,core,grind};do echo death$i rules\!;done

Offline

#16 2012-10-24 18:35:01

piyushbhatt
Member
From: Bangalore
Registered: 2009-04-18
Posts: 65

Re: fast tsc calibration failed after upgrade to linux 3.6

I have x86_64.

I see 

[drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value"  is startup.

But not tsc: Fast TSC calibration failed message.

I have normal Harddisk not SSD.

Last edited by piyushbhatt (2012-10-24 18:40:02)

Offline

#17 2012-10-24 21:42:44

theodore
Member
Registered: 2008-09-09
Posts: 151

Re: fast tsc calibration failed after upgrade to linux 3.6

the same error here as well, with x86_64, and no ssd

Offline

#18 2012-10-24 23:33:35

Flavious
Member
Registered: 2007-11-24
Posts: 49

Re: fast tsc calibration failed after upgrade to linux 3.6

rasertux wrote:

I have the same error and i use Arch x86_64...

[drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value

Same error on x86_64.

Offline

#19 2012-10-25 06:33:05

ajb
Member
From: Poland
Registered: 2008-02-06
Posts: 31

Re: fast tsc calibration failed after upgrade to linux 3.6

x86_64

only

tsc: Fast TSC calibration failed

and I have SSD drive.

kernel 3.6.2-1-ARCH

Offline

#20 2012-10-25 09:32:23

Jeffus
Member
From: Israel
Registered: 2012-06-05
Posts: 15

Re: fast tsc calibration failed after upgrade to linux 3.6

Same here on x86_64 No SSD drive
uname -a
Linux (none) 3.6.2-1-ARCH #1 SMP PREEMPT Fri Oct 12 23:58:58 CEST 2012 x86_64 GNU/Linux


Learning Arch-ery...

Offline

#21 2012-10-25 09:44:08

Jeffus
Member
From: Israel
Registered: 2012-06-05
Posts: 15

Re: fast tsc calibration failed after upgrade to linux 3.6

Look at this and the reply, seems like there are no side effects like disintegrating computers etc. so I am going to stop reading that line when it is logged to my screen...
https://lkml.org/lkml/2012/9/24/221


Learning Arch-ery...

Offline

#22 2012-10-25 09:48:25

Jeffus
Member
From: Israel
Registered: 2012-06-05
Posts: 15

Re: fast tsc calibration failed after upgrade to linux 3.6

For those interested in some background...
http://en.wikipedia.org/wiki/Time_Stamp_Counter

This is interesting from the link above...

"Operating system support

The RDTSC instruction can be enabled or disabled by operating systems. For example, on some versions of the Linux kernel, seccomp sandboxing mode disables RDTSC.[8] It can also be disabled using the PR_SET_TSC argument to the prctl() syscall.[9]"

It may also be a kernel change for use in the chromebook
http://www.chromium.org/chromium-os/how … ronization

Last edited by Jeffus (2012-10-25 09:52:53)


Learning Arch-ery...

Offline

#23 2012-10-25 09:56:52

Jeffus
Member
From: Israel
Registered: 2012-06-05
Posts: 15

Re: fast tsc calibration failed after upgrade to linux 3.6

"They have been added to those processors mainly to allow system performance measurements and less for traffic shaping in networks. But, while they are present, their use is quite popular. In the Pentium processor and its successors (and most of its clones), this is a 64-bit-wide TSC (Time Stamp Counter) register; its content is incremented by a value of one in each processor clock."
from:
http://www.6test.edu.cn/~lujx/linux_net … 1sec7.html


Learning Arch-ery...

Offline

#24 2012-10-26 05:09:14

sqlpython
Member
Registered: 2012-08-20
Posts: 9

Re: fast tsc calibration failed after upgrade to linux 3.6

I also get the error "Fast TSC calibration failed" on the screen after upgrading to linux 3.6

  My kernel

[sqlpython@bridgelinux ~]$ uname -r
3.6.3-1-ARCH

As you can see I am from the Unholy great Unwashed hoard.
Just wanted to add my failed message to the database of info..
Not looking for Support.
  I lowered my gaze and did not look directly at the Arch as I posted.

Last edited by sqlpython (2012-10-26 05:22:53)

Offline

#25 2012-10-26 05:21:43

sqlpython
Member
Registered: 2012-08-20
Posts: 9

Re: fast tsc calibration failed after upgrade to linux 3.6

Just upgraded 4 packages and the Error message is now gone..

[2012-10-26 05:12] upgraded bison (2.6.2-1 -> 2.6.4-1)
[2012-10-26 05:12] upgraded coreutils (8.19-1 -> 8.20-1)
[2012-10-26 05:12] upgraded cryptsetup (1.5.0-2 -> 1.5.1-1)
[2012-10-26 05:12] upgraded systemd (194-4 -> 195-2)

 
I am thinking that the systemd 195-2 may have been that which helped the situation.
  Just adding to the Database of info...
Not looking for support.
As I am from the Unholy and Unwashed hoards I again......
Lowered my gaze and did not look directly upon the Arch as I posted..

Offline

Board footer

Powered by FluxBB