You are not logged in.

#1 2012-10-30 19:54:39

totalizator
Member
Registered: 2010-09-09
Posts: 8

How to bind ppp0 interface (PPTP) as 'external' in proxy server?

Hi!
I'm trying to bind ppp0 interface (PPTP VPN) as 'external' interface in proxy server (Tinyproxy).  Unfortunately it does not work.

Using route add -net default gw 10.9.0.1 I can make all the traffic go via VPN but this is not what I want.

My routes after ppp0 is up:

default         192.168.1.1     0.0.0.0         UG    0      0        0 eth0
10.9.0.1        *               255.255.255.255 UH    0      0        0 ppp0
192.168.1.0     *               255.255.255.0   U     0      0        0 eth0
216-18-212-218. 192.168.1.1     255.255.255.255 UGH   0      0        0 eth0

ifconfig:

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.100  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::21d:60ff:fe25:7ad6  prefixlen 64  scopeid 0x20<link>
        ether 00:1d:60:25:7a:d6  txqueuelen 1000  (Ethernet)
        RX packets 47533  bytes 31947804 (30.4 MiB)
        RX errors 0  dropped 1  overruns 0  frame 0
        TX packets 44946  bytes 6618945 (6.3 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 16436
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 13167  bytes 1604741 (1.5 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 13167  bytes 1604741 (1.5 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST>  mtu 1496
        inet 10.9.34.125  netmask 255.255.255.255  destination 10.9.0.1
        ppp  txqueuelen 3  (Point-to-Point Protocol)
        RX packets 1088  bytes 568896 (555.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1328  bytes 167081 (163.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Do I need to add some other, specific route? What IP Tinyproxy 'external' should be bound to (I've tried both gw and peer)?

Offline

Board footer

Powered by FluxBB