You are not logged in.

Pages: 1 2

#1 2012-10-31 02:58:46

startover
Member
Registered: 2011-01-24
Posts: 34

[SOLVED] GDM crashes after the new update

I get

 gdm-binary[892]: warning: GdmDisplay: display lasted ..... seconds.

for a multiple times, with the picture of a sad computer flashing in between, until I get 

 gdm-binary[892]: warning: GdmLocalDisplayFactory: maximum number of X display failures reached, check X server log for errors

not sure if this has really anything to do with the X server but below is my Xorg.5.log.

p.s. I have tried solutions for similar problems, such as moving dconf and .config directories, but that didn't help. I also disabled autologin, yet same problem. So i guess it is shouldn't have anything to do with user configurations.

[   556.829] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[   556.829] X Protocol Version 11, Revision 0
[   556.829] Build Operating System: Linux 3.6.2-1-ARCH x86_64 
[   556.829] Current Operating System: Linux timelinex 3.6.3-1-ARCH #1 SMP PREEMPT Mon Oct 22 10:23:56 CEST 2012 x86_64
[   556.829] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda5 ro quiet acpi_osi=Linux init=/sbin/e4rat-preload
[   556.829] Build Date: 19 October 2012  03:54:56PM
[   556.829]  
[   556.829] Current version of pixman: 0.26.2
[   556.829] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   556.829] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   556.830] (==) Log file: "/var/log/Xorg.5.log", Time: Tue Oct 30 22:20:44 2012
[   556.830] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   556.830] (==) No Layout section.  Using the first Screen section.
[   556.830] (==) No screen section available. Using defaults.
[   556.830] (**) |-->Screen "Default Screen Section" (0)
[   556.830] (**) |   |-->Monitor "<default monitor>"
[   556.830] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   556.830] (==) Automatically adding devices
[   556.830] (==) Automatically enabling devices
[   556.830] (==) Automatically adding GPU devices
[   556.831] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   556.831] 	Entry deleted from font path.
[   556.831] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   556.831] (==) ModulePath set to "/usr/lib/xorg/modules"
[   556.831] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   556.831] (II) Loader magic: 0x7fcc20
[   556.831] (II) Module ABI versions:
[   556.831] 	X.Org ANSI C Emulation: 0.4
[   556.831] 	X.Org Video Driver: 13.0
[   556.831] 	X.Org XInput driver : 18.0
[   556.831] 	X.Org Server Extension : 7.0
[   556.832] (II) config/udev: Adding drm device (/dev/dri/card0)
[   556.834] (--) PCI:*(0:0:2:0) 8086:0046:1025:0364 rev 24, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[   556.834] (II) Open ACPI successful (/var/run/acpid.socket)
[   556.834] Initializing built-in extension Generic Event Extension
[   556.834] Initializing built-in extension SHAPE
[   556.834] Initializing built-in extension MIT-SHM
[   556.834] Initializing built-in extension XInputExtension
[   556.834] Initializing built-in extension XTEST
[   556.834] Initializing built-in extension BIG-REQUESTS
[   556.834] Initializing built-in extension SYNC
[   556.834] Initializing built-in extension XKEYBOARD
[   556.834] Initializing built-in extension XC-MISC
[   556.834] Initializing built-in extension SECURITY
[   556.834] Initializing built-in extension XINERAMA
[   556.834] Initializing built-in extension XFIXES
[   556.834] Initializing built-in extension RENDER
[   556.834] Initializing built-in extension RANDR
[   556.834] Initializing built-in extension COMPOSITE
[   556.834] Initializing built-in extension DAMAGE
[   556.834] Initializing built-in extension MIT-SCREEN-SAVER
[   556.834] Initializing built-in extension DOUBLE-BUFFER
[   556.834] Initializing built-in extension RECORD
[   556.834] Initializing built-in extension DPMS
[   556.834] Initializing built-in extension X-Resource
[   556.834] Initializing built-in extension XVideo
[   556.834] Initializing built-in extension XVideo-MotionCompensation
[   556.834] Initializing built-in extension XFree86-VidModeExtension
[   556.834] Initializing built-in extension XFree86-DGA
[   556.834] Initializing built-in extension XFree86-DRI
[   556.834] Initializing built-in extension DRI2
[   556.834] (II) LoadModule: "glx"
[   556.835] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   556.835] (II) Module glx: vendor="X.Org Foundation"
[   556.835] 	compiled for 1.13.0, module version = 1.0.0
[   556.835] 	ABI class: X.Org Server Extension, version 7.0
[   556.835] (==) AIGLX enabled
[   556.835] Loading extension GLX
[   556.835] (==) Matched intel as autoconfigured driver 0
[   556.835] (==) Matched intel as autoconfigured driver 1
[   556.835] (==) Matched vesa as autoconfigured driver 2
[   556.835] (==) Matched modesetting as autoconfigured driver 3
[   556.835] (==) Matched fbdev as autoconfigured driver 4
[   556.835] (==) Assigned the driver to the xf86ConfigLayout
[   556.835] (II) LoadModule: "intel"
[   556.836] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   556.836] (II) Module intel: vendor="X.Org Foundation"
[   556.836] 	compiled for 1.13.0, module version = 2.20.12
[   556.836] 	Module class: X.Org Video Driver
[   556.836] 	ABI class: X.Org Video Driver, version 13.0
[   556.836] (II) LoadModule: "vesa"
[   556.836] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   556.836] (II) Module vesa: vendor="X.Org Foundation"
[   556.836] 	compiled for 1.13.0, module version = 2.3.2
[   556.836] 	Module class: X.Org Video Driver
[   556.836] 	ABI class: X.Org Video Driver, version 13.0
[   556.836] (II) LoadModule: "modesetting"
[   556.837] (WW) Warning, couldn't open module modesetting
[   556.837] (II) UnloadModule: "modesetting"
[   556.837] (II) Unloading modesetting
[   556.837] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   556.837] (II) LoadModule: "fbdev"
[   556.837] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   556.837] (II) Module fbdev: vendor="X.Org Foundation"
[   556.837] 	compiled for 1.13.0, module version = 0.4.3
[   556.837] 	Module class: X.Org Video Driver
[   556.837] 	ABI class: X.Org Video Driver, version 13.0
[   556.837] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   556.838] (II) VESA: driver for VESA chipsets: vesa
[   556.838] (II) FBDEV: driver for framebuffer: fbdev
[   556.838] (++) using VT number 1

[   556.838] (II) intel(0): using device path '/dev/dri/card0'
[   556.838] (WW) Falling back to old probe method for vesa
[   556.838] (WW) Falling back to old probe method for fbdev
[   556.838] (II) Loading sub module "fbdevhw"
[   556.838] (II) LoadModule: "fbdevhw"
[   556.838] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   556.838] (II) Module fbdevhw: vendor="X.Org Foundation"
[   556.838] 	compiled for 1.13.0, module version = 0.0.2
[   556.838] 	ABI class: X.Org Video Driver, version 13.0
[   556.838] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   556.838] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   556.838] (==) intel(0): RGB weight 888
[   556.838] (==) intel(0): Default visual is TrueColor
[   556.838] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[   556.838] (**) intel(0): Relaxed fencing enabled
[   556.838] (**) intel(0): Wait on SwapBuffers? enabled
[   556.838] (**) intel(0): Triple buffering? enabled
[   556.838] (**) intel(0): Framebuffer tiled
[   556.838] (**) intel(0): Pixmaps tiled
[   556.838] (**) intel(0): 3D buffers tiled
[   556.838] (**) intel(0): SwapBuffers wait enabled
[   556.838] (==) intel(0): video overlay key set to 0x101fe
[   556.838] (II) intel(0): Output LVDS1 has no monitor section
[   556.843] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   556.857] (II) intel(0): Output VGA1 has no monitor section
[   556.857] (II) intel(0): Output HDMI1 has no monitor section
[   556.900] (II) intel(0): Output DP1 has no monitor section
[   556.900] (II) intel(0): EDID for output LVDS1
[   556.900] (II) intel(0): Manufacturer: AUO  Model: 322c  Serial#: 0
[   556.900] (II) intel(0): Year: 2009  Week: 0
[   556.900] (II) intel(0): EDID Version: 1.3
[   556.900] (II) intel(0): Digital Display Input
[   556.900] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
[   556.900] (II) intel(0): Gamma: 2.20
[   556.900] (II) intel(0): No DPMS capabilities specified
[   556.900] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   556.900] (II) intel(0): First detailed timing is preferred mode
[   556.900] (II) intel(0): redX: 0.590 redY: 0.345   greenX: 0.325 greenY: 0.540
[   556.900] (II) intel(0): blueX: 0.150 blueY: 0.145   whiteX: 0.313 whiteY: 0.329
[   556.900] (II) intel(0): Manufacturer's mask: 0
[   556.900] (II) intel(0): Supported detailed timing:
[   556.900] (II) intel(0): clock: 69.5 MHz   Image Size:  293 x 164 mm
[   556.900] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1466 h_border: 0
[   556.900] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 790 v_border: 0
[   556.900] (II) intel(0): Unknown vendor-specific block f
[   556.900] (II) intel(0):  AUO
[   556.900] (II) intel(0):  B133XW03 V2
[   556.900] (II) intel(0): EDID (in hex):
[   556.900] (II) intel(0): 	00ffffffffffff0006af2c3200000000
[   556.900] (II) intel(0): 	00130103801d10780a15859758538a26
[   556.900] (II) intel(0): 	25505400000001010101010101010101
[   556.900] (II) intel(0): 	010101010101261b5664500016303020
[   556.900] (II) intel(0): 	360025a4100000180000000f00000000
[   556.900] (II) intel(0): 	00000000000000000020000000fe0041
[   556.900] (II) intel(0): 	554f0a202020202020202020000000fe
[   556.900] (II) intel(0): 	004231333358573033205632200a0049
[   556.900] (II) intel(0): EDID vendor "AUO", prod id 12844
[   556.900] (II) intel(0): Printing DDC gathered Modelines:
[   556.901] (II) intel(0): Modeline "1366x768"x0.0   69.50  1366 1414 1446 1466  768 771 777 790 -hsync -vsync (47.4 kHz eP)
[   556.901] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   556.901] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   556.901] (II) intel(0): Printing probed modes for output LVDS1
[   556.901] (II) intel(0): Modeline "1366x768"x60.0   69.50  1366 1414 1446 1466  768 771 777 790 -hsync -vsync (47.4 kHz eP)
[   556.901] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   556.901] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   556.901] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   556.901] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   556.913] (II) intel(0): EDID for output VGA1
[   556.914] (II) intel(0): EDID for output HDMI1
[   556.956] (II) intel(0): EDID for output DP1
[   556.956] (II) intel(0): Output LVDS1 connected
[   556.956] (II) intel(0): Output VGA1 disconnected
[   556.956] (II) intel(0): Output HDMI1 disconnected
[   556.956] (II) intel(0): Output DP1 disconnected
[   556.956] (II) intel(0): Using exact sizes for initial modes
[   556.956] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   556.956] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   556.956] (II) intel(0): Kernel page flipping support detected, enabling
[   556.956] (**) intel(0): Display dimensions: (290, 160) mm
[   556.957] (**) intel(0): DPI set to (119, 121)
[   556.957] (II) Loading sub module "fb"
[   556.957] (II) LoadModule: "fb"
[   556.957] (II) Loading /usr/lib/xorg/modules/libfb.so
[   556.957] (II) Module fb: vendor="X.Org Foundation"
[   556.957] 	compiled for 1.13.0, module version = 1.0.0
[   556.957] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   556.957] (II) Loading sub module "dri2"
[   556.957] (II) LoadModule: "dri2"
[   556.957] (II) Module "dri2" already built-in
[   556.957] (II) UnloadModule: "vesa"
[   556.957] (II) Unloading vesa
[   556.957] (II) UnloadModule: "fbdev"
[   556.957] (II) Unloading fbdev
[   556.957] (II) UnloadSubModule: "fbdevhw"
[   556.957] (II) Unloading fbdevhw
[   556.957] (==) Depth 24 pixmap format is 32 bpp
[   556.957] (II) intel(0): [DRI2] Setup complete
[   556.957] (II) intel(0): [DRI2]   DRI driver: i965
[   556.957] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   556.969] (II) UXA(0): Driver registered support for the following operations:
[   556.969] (II)         solid
[   556.969] (II)         copy
[   556.969] (II)         composite (RENDER acceleration)
[   556.969] (II)         put_image
[   556.969] (II)         get_image
[   556.969] (==) intel(0): Backing store disabled
[   556.969] (==) intel(0): Silken mouse enabled
[   556.969] (II) intel(0): Initializing HW Cursor
[   556.969] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   556.980] (==) intel(0): DPMS enabled
[   556.980] (==) intel(0): Intel XvMC decoder enabled
[   556.980] (II) intel(0): Set up textured video
[   556.980] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   556.980] (II) intel(0): direct rendering: DRI2 Enabled
[   556.980] (==) intel(0): hotplug detection: "enabled"
[   557.000] (--) RandR disabled
[   557.012] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   557.012] (II) AIGLX: enabled GLX_INTEL_swap_event
[   557.012] (II) AIGLX: enabled GLX_ARB_create_context
[   557.012] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   557.012] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   557.012] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   557.012] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   557.012] (II) AIGLX: Loaded and initialized i965
[   557.012] (II) GLX: Initialized DRI2 GL provider for screen 0
[   557.012] (II) intel(0): Setting screen physical size to 361 x 203
[   557.110] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   557.110] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   557.110] (II) LoadModule: "evdev"
[   557.110] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   557.110] (II) Module evdev: vendor="X.Org Foundation"
[   557.110] 	compiled for 1.13.0, module version = 2.7.3
[   557.111] 	Module class: X.Org XInput Driver
[   557.111] 	ABI class: X.Org XInput driver, version 18.0
[   557.111] (II) Using input driver 'evdev' for 'Power Button'
[   557.111] (**) Power Button: always reports core events
[   557.111] (**) evdev: Power Button: Device: "/dev/input/event3"
[   557.111] (--) evdev: Power Button: Vendor 0 Product 0x1
[   557.111] (--) evdev: Power Button: Found keys
[   557.111] (II) evdev: Power Button: Configuring as keyboard
[   557.111] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   557.111] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   557.111] (**) Option "xkb_rules" "evdev"
[   557.111] (**) Option "xkb_model" "evdev"
[   557.111] (**) Option "xkb_layout" "us"
[   557.147] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[   557.147] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   557.147] (II) Using input driver 'evdev' for 'Video Bus'
[   557.148] (**) Video Bus: always reports core events
[   557.148] (**) evdev: Video Bus: Device: "/dev/input/event4"
[   557.148] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   557.148] (--) evdev: Video Bus: Found keys
[   557.148] (II) evdev: Video Bus: Configuring as keyboard
[   557.148] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[   557.148] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   557.148] (**) Option "xkb_rules" "evdev"
[   557.148] (**) Option "xkb_model" "evdev"
[   557.148] (**) Option "xkb_layout" "us"
[   557.149] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   557.149] (II) No input driver specified, ignoring this device.
[   557.149] (II) This device may have been added with another device file.
[   557.149] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   557.149] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   557.149] (II) Using input driver 'evdev' for 'Sleep Button'
[   557.149] (**) Sleep Button: always reports core events
[   557.149] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   557.149] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   557.150] (--) evdev: Sleep Button: Found keys
[   557.150] (II) evdev: Sleep Button: Configuring as keyboard
[   557.150] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[   557.150] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   557.150] (**) Option "xkb_rules" "evdev"
[   557.150] (**) Option "xkb_model" "evdev"
[   557.150] (**) Option "xkb_layout" "us"
[   557.150] (II) config/udev: Adding drm device (/dev/dri/card0)
[   557.151] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[   557.151] (II) No input driver specified, ignoring this device.
[   557.151] (II) This device may have been added with another device file.
[   557.151] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event12)
[   557.152] (II) No input driver specified, ignoring this device.
[   557.152] (II) This device may have been added with another device file.
[   557.152] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event13)
[   557.152] (II) No input driver specified, ignoring this device.
[   557.152] (II) This device may have been added with another device file.
[   557.152] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event14)
[   557.153] (II) No input driver specified, ignoring this device.
[   557.153] (II) This device may have been added with another device file.
[   557.153] (II) config/udev: Adding input device SlimBlade Mouse with Nano Receiver (/dev/input/event5)
[   557.153] (**) SlimBlade Mouse with Nano Receiver: Applying InputClass "evdev pointer catchall"
[   557.153] (II) Using input driver 'evdev' for 'SlimBlade Mouse with Nano Receiver'
[   557.153] (**) SlimBlade Mouse with Nano Receiver: always reports core events
[   557.153] (**) evdev: SlimBlade Mouse with Nano Receiver: Device: "/dev/input/event5"
[   557.153] (--) evdev: SlimBlade Mouse with Nano Receiver: Vendor 0x47d Product 0x203e
[   557.154] (--) evdev: SlimBlade Mouse with Nano Receiver: Found 3 mouse buttons
[   557.154] (--) evdev: SlimBlade Mouse with Nano Receiver: Found scroll wheel(s)
[   557.154] (--) evdev: SlimBlade Mouse with Nano Receiver: Found relative axes
[   557.154] (--) evdev: SlimBlade Mouse with Nano Receiver: Found x and y relative axes
[   557.154] (--) evdev: SlimBlade Mouse with Nano Receiver: Found absolute axes
[   557.154] (II) evdev: SlimBlade Mouse with Nano Receiver: Forcing absolute x/y axes to exist.
[   557.154] (II) evdev: SlimBlade Mouse with Nano Receiver: Configuring as mouse
[   557.154] (II) evdev: SlimBlade Mouse with Nano Receiver: Adding scrollwheel support
[   557.154] (**) evdev: SlimBlade Mouse with Nano Receiver: YAxisMapping: buttons 4 and 5
[   557.154] (**) evdev: SlimBlade Mouse with Nano Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   557.154] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5/event5"
[   557.154] (II) XINPUT: Adding extended input device "SlimBlade Mouse with Nano Receiver" (type: MOUSE, id 9)
[   557.154] (II) evdev: SlimBlade Mouse with Nano Receiver: initialized for relative axes.
[   557.154] (WW) evdev: SlimBlade Mouse with Nano Receiver: ignoring absolute axes.
[   557.154] (**) SlimBlade Mouse with Nano Receiver: (accel) keeping acceleration scheme 1
[   557.154] (**) SlimBlade Mouse with Nano Receiver: (accel) acceleration profile 0
[   557.154] (**) SlimBlade Mouse with Nano Receiver: (accel) acceleration factor: 2.000
[   557.154] (**) SlimBlade Mouse with Nano Receiver: (accel) acceleration threshold: 4
[   557.155] (II) config/udev: Adding input device SlimBlade Mouse with Nano Receiver (/dev/input/mouse0)
[   557.155] (II) No input driver specified, ignoring this device.
[   557.155] (II) This device may have been added with another device file.
[   557.156] (II) config/udev: Adding input device 1.3M WebCam (/dev/input/event10)
[   557.156] (**) 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[   557.156] (II) Using input driver 'evdev' for '1.3M WebCam'
[   557.156] (**) 1.3M WebCam: always reports core events
[   557.156] (**) evdev: 1.3M WebCam: Device: "/dev/input/event10"
[   557.156] (--) evdev: 1.3M WebCam: Vendor 0x402 Product 0x9665
[   557.156] (--) evdev: 1.3M WebCam: Found keys
[   557.156] (II) evdev: 1.3M WebCam: Configuring as keyboard
[   557.156] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input10/event10"
[   557.156] (II) XINPUT: Adding extended input device "1.3M WebCam" (type: KEYBOARD, id 10)
[   557.156] (**) Option "xkb_rules" "evdev"
[   557.156] (**) Option "xkb_model" "evdev"
[   557.156] (**) Option "xkb_layout" "us"
[   557.157] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   557.157] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   557.157] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   557.157] (**) AT Translated Set 2 keyboard: always reports core events
[   557.157] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   557.157] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   557.157] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   557.157] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   557.157] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   557.157] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   557.157] (**) Option "xkb_rules" "evdev"
[   557.157] (**) Option "xkb_model" "evdev"
[   557.157] (**) Option "xkb_layout" "us"
[   557.157] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[   557.157] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   557.157] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   557.157] (II) LoadModule: "synaptics"
[   557.157] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   557.157] (II) Module synaptics: vendor="X.Org Foundation"
[   557.157] 	compiled for 1.13.0, module version = 1.6.2
[   557.157] 	Module class: X.Org XInput Driver
[   557.157] 	ABI class: X.Org XInput driver, version 18.0
[   557.157] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   557.157] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   557.157] (**) Option "Device" "/dev/input/event9"
[   557.160] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   557.160] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5822
[   557.160] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4766
[   557.160] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   557.160] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   557.160] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   557.160] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   557.160] (**) Option "SHMConfig" "on"
[   557.160] (**) Option "TapButton1" "1"
[   557.160] (**) Option "TapButton2" "2"
[   557.160] (**) Option "TapButton3" "3"
[   557.160] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   557.160] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   557.160] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[   557.160] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   557.160] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   557.160] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   557.160] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[   557.161] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   557.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   557.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   557.161] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   557.161] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   557.161] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   557.161] (II) No input driver specified, ignoring this device.
[   557.161] (II) This device may have been added with another device file.
[   557.161] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[   557.161] (II) No input driver specified, ignoring this device.
[   557.161] (II) This device may have been added with another device file.
[   557.161] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event7)
[   557.161] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   557.161] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[   557.161] (**) Acer WMI hotkeys: always reports core events
[   557.161] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event7"
[   557.162] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[   557.162] (--) evdev: Acer WMI hotkeys: Found keys
[   557.162] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[   557.162] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[   557.162] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 13)
[   557.162] (**) Option "xkb_rules" "evdev"
[   557.162] (**) Option "xkb_model" "evdev"
[   557.162] (**) Option "xkb_layout" "us"
[   557.162] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event8)
[   557.162] (II) No input driver specified, ignoring this device.
[   557.162] (II) This device may have been added with another device file.
[   557.162] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[   557.162] (II) No input driver specified, ignoring this device.
[   557.162] (II) This device may have been added with another device file.
[   557.168] (II) intel(0): EDID vendor "AUO", prod id 12844
[   557.168] (II) intel(0): Printing DDC gathered Modelines:
[   557.168] (II) intel(0): Modeline "1366x768"x0.0   69.50  1366 1414 1446 1466  768 771 777 790 -hsync -vsync (47.4 kHz eP)
[   557.544] (II) intel(0): EDID vendor "AUO", prod id 12844
[   557.545] (II) intel(0): Printing DDC gathered Modelines:
[   557.545] (II) intel(0): Modeline "1366x768"x0.0   69.50  1366 1414 1446 1466  768 771 777 790 -hsync -vsync (47.4 kHz eP)
[   559.716] (II) evdev: Acer WMI hotkeys: Close
[   559.716] (II) UnloadModule: "evdev"
[   559.716] (II) UnloadModule: "synaptics"
[   559.716] (II) evdev: AT Translated Set 2 keyboard: Close
[   559.716] (II) UnloadModule: "evdev"
[   559.716] (II) evdev: 1.3M WebCam: Close
[   559.716] (II) UnloadModule: "evdev"
[   559.716] (II) evdev: SlimBlade Mouse with Nano Receiver: Close
[   559.716] (II) UnloadModule: "evdev"
[   559.716] (II) evdev: Sleep Button: Close
[   559.716] (II) UnloadModule: "evdev"
[   559.716] (II) evdev: Video Bus: Close
[   559.716] (II) UnloadModule: "evdev"
[   559.716] (II) evdev: Power Button: Close
[   559.717] (II) UnloadModule: "evdev"
[   560.653] Server terminated successfully (0). Closing log file.

Last edited by startover (2012-11-01 02:37:29)

Offline

#2 2012-10-31 03:31:21

rkwurth
Member
Registered: 2012-10-31
Posts: 18

Re: [SOLVED] GDM crashes after the new update

What's the result of starting X via "startx" with a properly configured ~/.xinitrc?

Offline

#3 2012-10-31 06:18:52

AncientPC
Member
Registered: 2012-02-11
Posts: 52

Re: [SOLVED] GDM crashes after the new update

I had this same problem and fixed it over the last 2 hours.

GDM in Gnome 3.6 requires systemd to work. It seems weird that the first complaint is gdm-binary crashing, but it is what it is.

First, read through and do a mixed installation with init/systemd. If you get any red warnings when booting with init, this comparison table will help you migrate your /etc/rc.conf.

Offline

#4 2012-10-31 06:28:19

excitablesnowball
Member
Registered: 2012-03-02
Posts: 7

Re: [SOLVED] GDM crashes after the new update

AncientPC wrote:

I had this same problem and fixed it over the last 2 hours.

GDM in Gnome 3.6 requires systemd to work. It seems weird that the first complaint is gdm-binary crashing, but it is what it is.

First, read through and do a mixed installation with init/systemd. If you get any red warnings when booting with init, this comparison table will help you migrate your /etc/rc.conf.

Just here to back this up. I had the same problem and this was the solution.

Related issue: after the upgrade, gnome-screensaver didn't start automatically, so the lock screen didn't work.

Last edited by excitablesnowball (2012-10-31 06:47:00)

Offline

#5 2012-10-31 09:56:39

misterpah
Member
Registered: 2012-04-04
Posts: 2

Re: [SOLVED] GDM crashes after the new update

hi all.
i'm having the same problem as OP.
the thing is, i already migrate to systemd before upgrading the gnome.
there were no red warnings during the boot.
i don't know if this helps, but journalctl does produce 1 red warning/error. its regarding pusleaudio and bluez.

any hints ?

Offline

#6 2012-10-31 10:29:23

benob
Member
Registered: 2008-11-11
Posts: 187

Re: [SOLVED] GDM crashes after the new update

Same issue (with systemd installed)  but gdm freezes just after displaying the mouse instead of printing an error message. I don't even know where to start to tackle the issue.

Offline

#7 2012-10-31 10:33:51

benob
Member
Registered: 2008-11-11
Posts: 187

Re: [SOLVED] GDM crashes after the new update

OK. Journalctl -u gdm.service yields "warning: failed to give slave process access to the display. Trying to proceed."

Any idea?

Offline

#8 2012-10-31 10:49:27

Mocco
Member
Registered: 2012-07-12
Posts: 53

Re: [SOLVED] GDM crashes after the new update

I have the same problem here but already migrated to systemd before upgrading to gnome! Help please sad

Offline

#9 2012-10-31 12:26:59

NSky
Member
From: Rostov-on-Don, Russia
Registered: 2012-06-22
Posts: 14

Re: [SOLVED] GDM crashes after the new update

Absolutely the same for me and absolutely no ideas. Anyone please?

Offline

#10 2012-10-31 12:36:12

sweetthdevil
Member
Registered: 2009-10-20
Posts: 417

Re: [SOLVED] GDM crashes after the new update

I am also struggling, just update this morning x refuse to start. I have checked the boot log and the only fail is "starting syslog-ng"

I am trying to run startx but it return an unknown command? Any idea?

Offline

#11 2012-10-31 12:41:28

skunktrader
Member
From: Brisbane, Australia
Registered: 2010-02-14
Posts: 1,578

Re: [SOLVED] GDM crashes after the new update

sweetthdevil wrote:

I am trying to run startx but it return an unknown command? Any idea?

Did you remember to remove ck-launch-session ?

Offline

#12 2012-10-31 12:50:50

sweetthdevil
Member
Registered: 2009-10-20
Posts: 417

Re: [SOLVED] GDM crashes after the new update

No but xorg-xinit wasn't install and no startx works but returns error

Where can I find info on the ck-launch-session

Edit: all xorg package were missing

xorg-twm xorg-xclock xterm xorg-xinit xorg-server-utils

Now those are reinstalled startx works and I get the window example. Will now check xinit

Last edited by sweetthdevil (2012-10-31 12:58:31)

Offline

#13 2012-10-31 12:53:19

rkwurth
Member
Registered: 2012-10-31
Posts: 18

Re: [SOLVED] GDM crashes after the new update

@sweetthdevil- Can we see your ~/.xinitrc? You do have the package "xorg-xinit" installed, correct?

EDIT: Just saw your previous response after posting this.

Last edited by rkwurth (2012-10-31 12:55:13)

Offline

#14 2012-10-31 12:59:28

benob
Member
Registered: 2008-11-11
Posts: 187

Re: [SOLVED] GDM crashes after the new update

Workaround: I was not able to fix gdm, but using slim as a display manager seems to work. Here are the steps I followed:

Assuming you use systemd as described in the wiki. If your session freeses, add the parameter "1" to your kernel command line in grub, this leads you to a bare bones recovery console in which you can disable gdm with

systemctl disable gdm.service

Then boot normally to a console login prompt. Install xorg-xinit and slim:

pacman -S xorg-xinit slim

Enable the slim service:

systemctl enable slim.service

Edit your .xinitrc (as described in the wiki) to make sure it runs gnome:

exec gnome-session

And finally start slim:

systemctl start slim.service

Offline

#15 2012-10-31 13:16:15

sweetthdevil
Member
Registered: 2009-10-20
Posts: 417

Re: [SOLVED] GDM crashes after the new update

Update:

Right now from the startx command I arrive straight away on my desktop and not gdm and after a minute gnome crash and I returned to the tty 1.

Any advice?

Offline

#16 2012-10-31 13:21:43

rkwurth
Member
Registered: 2012-10-31
Posts: 18

Re: [SOLVED] GDM crashes after the new update

What's the console output produced from startx?

Offline

#17 2012-10-31 13:27:37

sweetthdevil
Member
Registered: 2009-10-20
Posts: 417

Re: [SOLVED] GDM crashes after the new update

Well I am answering from my tablet so I don't see myself typing it all. Which log file would be interesting do you thing and I will try to remember how to send it on a paste in service.

Cheers for your assistance

Offline

#18 2012-10-31 13:34:40

startover
Member
Registered: 2011-01-24
Posts: 34

Re: [SOLVED] GDM crashes after the new update

rkwurth wrote:

What's the result of starting X via "startx" with a properly configured ~/.xinitrc?

startx works totally fine. i get couple of functional windows and mouse cursor

Offline

#19 2012-10-31 13:37:58

timosa
Member
From: Finland
Registered: 2011-06-26
Posts: 16

Re: [SOLVED] GDM crashes after the new update

I upgraded Gnome on my laptop and desktop. They both use pure systemd. The desktop works without problems, but the laptop didn't. The gdm.service reports the following errors:

[root@leopardi ~]# journalctl -u gdm.service
-- Logs begin at Sun, 2012-10-28 12:43:02 EET, end at Wed, 2012-10-31 06:44:20 EET. --
Oct 28 12:43:02 leopardi gdm-simple-slave[425]: WARNING: Child process 552 was already dead.
-- Reboot --
Oct 29 17:30:32 leopardi gdm-simple-slave[335]: WARNING: Child process 477 was already dead.
Oct 29 20:59:51 leopardi gdm-simple-slave[2702]: WARNING: Child process 2730 was already dead.
-- Reboot --
Oct 30 19:51:10 leopardi gdm-simple-slave[321]: WARNING: Child process 461 was already dead.
Oct 30 23:02:53 leopardi gdm-simple-slave[321]: WARNING: Freeing conversation 'gdm-password' with active job
-- Reboot --
Oct 31 06:44:20 leopardi gdm-simple-slave[317]: WARNING: Child process 463 was already dead.
-- Reboot --
Oct 31 15:14:22 leopardi gdm-simple-slave[326]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Oct 31 15:21:45 leopardi gdm-simple-slave[326]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Oct 31 15:21:45 leopardi gdm-simple-slave[326]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Oct 31 15:21:58 leopardi gdm-simple-slave[725]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Oct 31 15:27:33 leopardi gdm-simple-slave[725]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Oct 31 15:27:33 leopardi gdm-simple-slave[725]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Oct 31 15:27:34 leopardi gdm-simple-slave[807]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Oct 31 15:34:15 leopardi gdm-simple-slave[807]: GLib-GObject-CRITICAL: g_object_ref: assertion `object->ref_count > 0' failed
Oct 31 15:34:15 leopardi gdm-simple-slave[807]: GLib-GObject-CRITICAL: g_object_unref: assertion `object->ref_count > 0' failed
Oct 31 15:34:15 leopardi gdm-simple-slave[979]: WARNING: Failed to give slave programs access to the display. Trying to proceed.

Offline

#20 2012-10-31 13:44:54

rkwurth
Member
Registered: 2012-10-31
Posts: 18

Re: [SOLVED] GDM crashes after the new update

@sweetthdevil: startx &> ~/startx.log will save the output to ~/startx.log

@startover: You're using startx to start gnome... or twm?

Last edited by rkwurth (2012-10-31 13:48:19)

Offline

#21 2012-10-31 13:58:48

sweetthdevil
Member
Registered: 2009-10-20
Posts: 417

Re: [SOLVED] GDM crashes after the new update

Right,

See below startx log:

X.Org X Server 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.2-1-ARCH i686 
Current Operating System: Linux Arch 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 15:13:56 CET 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f4a7ed0a-8a4a-4e43-8b57-4ccddec8f31e ro quiet
Build Date: 19 October 2012  03:58:01PM
 
Current version of pixman: 0.26.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 31 13:45:51 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
GNOME_KEYRING_CONTROL=/home/sweetth/.cache/keyring-yAnqSU
GNOME_KEYRING_PID=1420
GNOME_KEYRING_CONTROL=/home/sweetth/.cache/keyring-yAnqSU
GNOME_KEYRING_CONTROL=/home/sweetth/.cache/keyring-yAnqSU
GPG_AGENT_INFO=/home/sweetth/.cache/keyring-yAnqSU/gpg:0:1
GNOME_KEYRING_CONTROL=/home/sweetth/.cache/keyring-yAnqSU
GPG_AGENT_INFO=/home/sweetth/.cache/keyring-yAnqSU/gpg:0:1
SSH_AUTH_SOCK=/home/sweetth/.cache/keyring-yAnqSU/ssh

(gnome-settings-daemon:1418): power-plugin-WARNING **: no systemd support

(gnome-settings-daemon:1418): power-plugin-WARNING **: Unable to start power manager: Error calling StartServiceByName for org.freedesktop.login1: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 1

(gnome-settings-daemon:1418): media-keys-plugin-WARNING **: Failed to connect to systemd: Error calling StartServiceByName for org.freedesktop.login1: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 1

(gnome-settings-daemon:1418): GLib-GIO-CRITICAL **: g_dbus_proxy_call_internal: assertion `G_IS_DBUS_PROXY (proxy)' failed

(gnome-settings-daemon:1418): color-plugin-WARNING **: failed to create device: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-device auth

(gnome-settings-daemon:1418): color-plugin-WARNING **: failed to create device: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-device auth

(gnome-settings-daemon:1418): color-plugin-WARNING **: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-profile auth

(gnome-settings-daemon:1418): color-plugin-WARNING **: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-profile auth
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
N: [pulseaudio] main.c: User-configured server at {1603b312050eb424a77bbb74000001f6}unix:/tmp/pulse-EK7KSgOxEETI/native, which appears to be local. Probing deeper.

** (nm-applet:1448): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
** Message: applet now removed from the notification area

** (nm-applet:1448): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.

** (nm-applet:1448): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
31.10.2012 13:45:53 INFO      Démarrage pyLoad 0.4.9.9-dev
31.10.2012 13:45:53 INFO      Utilisation du dossier principal : /home/sweetth/.pyload
31.10.2012 13:45:53 DEBUG     Deleting old pidfile pyload.pid
31.10.2012 13:45:53 DEBUG     Remote activated: True
Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
    JS ERROR: !!!   Exception was: Polkit.Error: No session for pid 1434
    JS ERROR: !!!     message = '"No session for pid 1434"'
    JS ERROR: !!!     fileName = '"/usr/share/gnome-shell/js/ui/components/polkitAgent.js"'
    JS ERROR: !!!     lineNumber = '329'
    JS ERROR: !!!     stack = '"0 anonymous()@/usr/share/gnome-shell/js/ui/components/polkitAgent.js:329
1 wrapper()@/usr/share/gjs-1.0/lang.js:204
2 anonymous("name" = ""polkitAgent"")@/usr/share/gnome-shell/js/ui/components/__init__.js:56
3 wrapper(""polkitAgent"")@/usr/share/gjs-1.0/lang.js:204
4 anonymous("name" = ""polkitAgent"", 1, [object Array])@/usr/share/gnome-shell/js/ui/components/__init__.js:22
5 anonymous()@/usr/share/gnome-shell/js/ui/components/__init__.js:21
6 wrapper()@/usr/share/gjs-1.0/lang.js:204
7 anonymous()@/usr/share/gnome-shell/js/ui/components/__init__.js:13
8 wrapper()@/usr/share/gjs-1.0/lang.js:204
9 anonymous()@/usr/share/gjs-1.0/lang.js:145
10 anonymous()@/usr/share/gjs-1.0/lang.js:239
11 start()@/usr/share/gnome-shell/js/ui/main.js:150
12 <TOP LEVEL>@<main>:1
"'
Window manager warning: Log level 32: Execution of main.js threw exception: Polkit.Error: No session for pid 1434
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Compat map for group 2 redefined
>                   Using new definition
> Warning:          Compat map for group 3 redefined
>                   Using new definition
> Warning:          Compat map for group 4 redefined
>                   Using new definition
Errors from xkbcomp are not fatal to the X server
Window manager warning: Log level 16: Could not initialize NMClient /org/freedesktop/NetworkManager: Launch helper exited with unknown return code 1
    JS ERROR: !!!   Exception was: Polkit.Error: No session for pid 1524
    JS ERROR: !!!     message = '"No session for pid 1524"'
    JS ERROR: !!!     fileName = '"/usr/share/gnome-shell/js/ui/components/polkitAgent.js"'
    JS ERROR: !!!     lineNumber = '329'
    JS ERROR: !!!     stack = '"0 anonymous()@/usr/share/gnome-shell/js/ui/components/polkitAgent.js:329
1 wrapper()@/usr/share/gjs-1.0/lang.js:204
2 anonymous("name" = ""polkitAgent"")@/usr/share/gnome-shell/js/ui/components/__init__.js:56
3 wrapper(""polkitAgent"")@/usr/share/gjs-1.0/lang.js:204
4 anonymous("name" = ""polkitAgent"", 1, [object Array])@/usr/share/gnome-shell/js/ui/components/__init__.js:22
5 anonymous()@/usr/share/gnome-shell/js/ui/components/__init__.js:21
6 wrapper()@/usr/share/gjs-1.0/lang.js:204
7 anonymous()@/usr/share/gnome-shell/js/ui/components/__init__.js:13
8 wrapper()@/usr/share/gjs-1.0/lang.js:204
9 anonymous()@/usr/share/gjs-1.0/lang.js:145
10 anonymous()@/usr/share/gjs-1.0/lang.js:239
11 start()@/usr/share/gnome-shell/js/ui/main.js:150
12 <TOP LEVEL>@<main>:1
"'
Window manager warning: Log level 32: Execution of main.js threw exception: Polkit.Error: No session for pid 1524
gnome-session[1373]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Traceback (most recent call last):
  File "/opt/pyload/module/plugins/Account.py", line 99, in _login
    self.login(req)
  File "/opt/pyload/module/plugins/accounts/OronCom.py", line 51, in login
    req.load("http://oron.com/?op=change_lang&lang=german")
  File "/opt/pyload/module/network/Browser.py", line 104, in load
    return self.http.load(*args, **kwargs)
  File "/opt/pyload/module/network/HTTPRequest.py", line 212, in load
    self.c.perform()
error: (7, "couldn't connect to host")

(gnome-settings-daemon:1418): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(gnome-settings-daemon:1418): GLib-GObject-CRITICAL **: g_signal_handlers_disconnect_matched: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(gnome-settings-daemon:1418): GLib-CRITICAL **: g_ptr_array_unref: assertion `array' failed
gnome-session[1373]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
gnome-session[1373]: Gtk-CRITICAL: gtk_main_quit: assertion `main_loops != NULL' failed
xinit: connection to X server lost

waiting for X server to shut down Server terminated successfully (0). Closing log file.

And again many thanks for your help!

Offline

#22 2012-10-31 13:59:17

timosa
Member
From: Finland
Registered: 2011-06-26
Posts: 16

Re: [SOLVED] GDM crashes after the new update

In my case, the problem is solved. The root partition had run out of space.

Offline

#23 2012-10-31 14:10:40

rkwurth
Member
Registered: 2012-10-31
Posts: 18

Re: [SOLVED] GDM crashes after the new update

You are using systemd, correct? If so, you might try to make sure everything else is up to date and reinstall gnome-settings-daemon with a quick 

pacman -Syyu gnome-settings-daemon

Last edited by rkwurth (2012-10-31 14:12:03)

Offline

#24 2012-10-31 14:17:14

sweetthdevil
Member
Registered: 2009-10-20
Posts: 417

Re: [SOLVED] GDM crashes after the new update

No I don,t think I am so i,'m now doing it wink

Offline

#25 2012-10-31 14:18:38

benob
Member
Registered: 2008-11-11
Posts: 187

Re: [SOLVED] GDM crashes after the new update

rkwurth wrote:

You are using systemd, correct? If so, you might try to make sure everything else is up to date and reinstall gnome-settings-daemon with a quick 

pacman -Syyu gnome-settings-daemon

This solved all my problems ! Thanks

Offline

Pages: 1 2

Board footer

Powered by FluxBB