You are not logged in.
Pages: 1
hello.yesterday,I followed the wiki to install pure systemd.but when i restarter,kde couldn't start but kdm ran fine.then,i tried to run kde by startkde but failed.it replied
$DISPLAY is not set or cannot connect to X server.
I googled this error but I only getted information about how to configure it with consolekit.
Here's output of systemctl:
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-...-1\x2d1.6-1\x2d1.6:1.0-bluetooth-hci0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/bluetooth/hci0
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 6 Series/C200 Series Chipset Family High Definition Audio Controller
sys-devices-pci0000:00-0000:00:1c.0-0000:07:00.0-net-eth0.device loaded active plugged NetLink BCM57781 Gigabit Ethernet PCIe
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-net-wlan0.device loaded active plugged Centrino Wireless-N 1000 [Condor Peak]
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda1.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda2.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda3.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda4.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda5.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda6.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda7.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...t1-target1:0:0-1:0:0:0-block-sda-sda8.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...2-host1-target1:0:0-1:0:0:0-block-sda.device loaded active plugged HITACHI_HTS547550A9E384
sys-devices-pci0000:00-...3-host2-target2:0:0-2:0:0:0-block-sr0.device loaded active plugged Optiarc_DVD_RW_AD-7740H
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-bluetooth-devices-hci0.device loaded active plugged /sys/subsystem/bluetooth/devices/hci0
sys-subsystem-net-devices-eth0.device loaded active plugged NetLink BCM57781 Gigabit Ethernet PCIe
sys-subsystem-net-devices-wlan0.device loaded active plugged Centrino Wireless-N 1000 [Condor Peak]
-.mount loaded active mounted /
boot.mount loaded active mounted /boot
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
mnt-d.mount loaded active mounted /mnt/d
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted /sys/kernel/debug
tmp.mount loaded active mounted /tmp
var.mount loaded active mounted /var
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
acpid.service loaded active running ACPI event daemon
cronie.service loaded active running Periodic Command Scheduler
dbus.service loaded active running D-Bus System Message Bus
getty@tty1.service loaded active running Getty on tty1
lm_sensors.service loaded active exited Initialize hardware monitoring sensors
lxdm.service loaded active running LXDE Display Manager
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
acpid.socket loaded active listening ACPID Listen Socket
dbus.socket loaded active running D-Bus System Message Bus Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
bluetooth.target loaded active active Bluetooth
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary DirectoriesLOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.[1;39m72 loaded units listed.[0m Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
This is Xorg.1.log,but it seems no problem.
[ 1630.241]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 1630.244] X Protocol Version 11, Revision 0
[ 1630.245] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 1630.246] Current Operating System: Linux ssfdust 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64
[ 1630.246] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c2eccb8b-70e3-49d5-b169-137ee95b307d ro quiet
[ 1630.248] Build Date: 19 October 2012 03:54:56PM
[ 1630.249]
[ 1630.250] Current version of pixman: 0.26.2
[ 1630.251] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1630.251] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1630.255] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Nov 4 01:15:54 2012
[ 1630.256] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1630.256] (==) No Layout section. Using the first Screen section.
[ 1630.256] (==) No screen section available. Using defaults.
[ 1630.256] (**) |-->Screen "Default Screen Section" (0)
[ 1630.256] (**) | |-->Monitor "<default monitor>"
[ 1630.256] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1630.256] (==) Automatically adding devices
[ 1630.256] (==) Automatically enabling devices
[ 1630.256] (==) Automatically adding GPU devices
[ 1630.256] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1630.256] Entry deleted from font path.
[ 1630.256] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1630.256] Entry deleted from font path.
[ 1630.256] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1630.256] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1630.256] Entry deleted from font path.
[ 1630.256] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1630.256] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1630.256] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1630.256] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1630.256] (II) Loader magic: 0x7fcc20
[ 1630.256] (II) Module ABI versions:
[ 1630.256] X.Org ANSI C Emulation: 0.4
[ 1630.256] X.Org Video Driver: 13.0
[ 1630.256] X.Org XInput driver : 18.0
[ 1630.256] X.Org Server Extension : 7.0
[ 1630.257] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1630.258] (--) PCI:*(0:0:2:0) 8086:0126:17aa:3982 rev 9, Mem @ 0xe0000000/4194304, 0xd0000000/268435456, I/O @ 0x00003000/64
[ 1630.258] (--) PCI: (0:1:0:0) 1002:6843:17aa:3982 rev 0, Mem @ 0xc0000000/268435456, 0xe0700000/131072, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[ 1630.258] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1630.259] Initializing built-in extension Generic Event Extension
[ 1630.259] Initializing built-in extension SHAPE
[ 1630.260] Initializing built-in extension MIT-SHM
[ 1630.261] Initializing built-in extension XInputExtension
[ 1630.262] Initializing built-in extension XTEST
[ 1630.263] Initializing built-in extension BIG-REQUESTS
[ 1630.263] Initializing built-in extension SYNC
[ 1630.264] Initializing built-in extension XKEYBOARD
[ 1630.265] Initializing built-in extension XC-MISC
[ 1630.266] Initializing built-in extension SECURITY
[ 1630.266] Initializing built-in extension XINERAMA
[ 1630.267] Initializing built-in extension XFIXES
[ 1630.267] Initializing built-in extension RENDER
[ 1630.268] Initializing built-in extension RANDR
[ 1630.269] Initializing built-in extension COMPOSITE
[ 1630.269] Initializing built-in extension DAMAGE
[ 1630.270] Initializing built-in extension MIT-SCREEN-SAVER
[ 1630.270] Initializing built-in extension DOUBLE-BUFFER
[ 1630.271] Initializing built-in extension RECORD
[ 1630.271] Initializing built-in extension DPMS
[ 1630.272] Initializing built-in extension X-Resource
[ 1630.272] Initializing built-in extension XVideo
[ 1630.273] Initializing built-in extension XVideo-MotionCompensation
[ 1630.273] Initializing built-in extension XFree86-VidModeExtension
[ 1630.273] Initializing built-in extension XFree86-DGA
[ 1630.274] Initializing built-in extension XFree86-DRI
[ 1630.274] Initializing built-in extension DRI2
[ 1630.274] (II) LoadModule: "glx"
[ 1630.274] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1630.275] (II) Module glx: vendor="X.Org Foundation"
[ 1630.275] compiled for 1.13.0, module version = 1.0.0
[ 1630.275] ABI class: X.Org Server Extension, version 7.0
[ 1630.275] (==) AIGLX enabled
[ 1630.275] Loading extension GLX
[ 1630.275] (==) Matched intel as autoconfigured driver 0
[ 1630.275] (==) Matched intel as autoconfigured driver 1
[ 1630.275] (==) Matched vesa as autoconfigured driver 2
[ 1630.275] (==) Matched modesetting as autoconfigured driver 3
[ 1630.275] (==) Matched fbdev as autoconfigured driver 4
[ 1630.275] (==) Assigned the driver to the xf86ConfigLayout
[ 1630.275] (II) LoadModule: "intel"
[ 1630.275] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1630.275] (II) Module intel: vendor="X.Org Foundation"
[ 1630.275] compiled for 1.13.0, module version = 2.20.12
[ 1630.275] Module class: X.Org Video Driver
[ 1630.275] ABI class: X.Org Video Driver, version 13.0
[ 1630.275] (II) LoadModule: "vesa"
[ 1630.275] (WW) Warning, couldn't open module vesa
[ 1630.275] (II) UnloadModule: "vesa"
[ 1630.275] (II) Unloading vesa
[ 1630.275] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1630.275] (II) LoadModule: "modesetting"
[ 1630.276] (WW) Warning, couldn't open module modesetting
[ 1630.276] (II) UnloadModule: "modesetting"
[ 1630.276] (II) Unloading modesetting
[ 1630.276] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 1630.276] (II) LoadModule: "fbdev"
[ 1630.276] (WW) Warning, couldn't open module fbdev
[ 1630.276] (II) UnloadModule: "fbdev"
[ 1630.276] (II) Unloading fbdev
[ 1630.276] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1630.276] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[ 1630.276] (++) using VT number 3[ 1630.276] (II) intel(0): using device path '/dev/dri/card0'
[ 1630.276] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1630.276] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1630.276] (==) intel(0): RGB weight 888
[ 1630.276] (==) intel(0): Default visual is TrueColor
[ 1630.276] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
[ 1630.276] (**) intel(0): Relaxed fencing enabled
[ 1630.276] (**) intel(0): Wait on SwapBuffers? enabled
[ 1630.276] (**) intel(0): Triple buffering? enabled
[ 1630.276] (**) intel(0): Framebuffer tiled
[ 1630.276] (**) intel(0): Pixmaps tiled
[ 1630.276] (**) intel(0): 3D buffers tiled
[ 1630.276] (**) intel(0): SwapBuffers wait enabled
[ 1630.276] (==) intel(0): video overlay key set to 0x101fe
[ 1630.276] (II) intel(0): Output LVDS1 has no monitor section
[ 1630.276] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 1630.290] (II) intel(0): Output VGA1 has no monitor section
[ 1630.291] (II) intel(0): Output HDMI1 has no monitor section
[ 1630.333] (II) intel(0): Output DP1 has no monitor section
[ 1630.333] (II) intel(0): EDID for output LVDS1
[ 1630.333] (II) intel(0): Manufacturer: AUO Model: 303c Serial#: 0
[ 1630.333] (II) intel(0): Year: 2010 Week: 0
[ 1630.333] (II) intel(0): EDID Version: 1.3
[ 1630.333] (II) intel(0): Digital Display Input
[ 1630.333] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 1630.333] (II) intel(0): Gamma: 2.20
[ 1630.333] (II) intel(0): No DPMS capabilities specified
[ 1630.333] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1630.333] (II) intel(0): First detailed timing is preferred mode
[ 1630.333] (II) intel(0): redX: 0.590 redY: 0.345 greenX: 0.340 greenY: 0.570
[ 1630.333] (II) intel(0): blueX: 0.150 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 1630.333] (II) intel(0): Manufacturer's mask: 0
[ 1630.333] (II) intel(0): Supported detailed timing:
[ 1630.333] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 1630.333] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 1630.333] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 1630.333] (II) intel(0): Unknown vendor-specific block f
[ 1630.333] (II) intel(0): AUO
[ 1630.333] (II) intel(0): B140XW03 V0
[ 1630.333] (II) intel(0): EDID (in hex):
[ 1630.333] (II) intel(0): 00ffffffffffff0006af3c3000000000
[ 1630.333] (II) intel(0): 00140103801f11780a10b59758579226
[ 1630.333] (II) intel(0): 1e505400000001010101010101010101
[ 1630.333] (II) intel(0): 010101010101121b5646500023302616
[ 1630.333] (II) intel(0): 360035ad100000180000000f00000000
[ 1630.333] (II) intel(0): 00000000000000000020000000fe0041
[ 1630.333] (II) intel(0): 554f0a202020202020202020000000fe
[ 1630.333] (II) intel(0): 004231343058573033205630200a002b
[ 1630.333] (II) intel(0): EDID vendor "AUO", prod id 12348
[ 1630.333] (II) intel(0): Printing DDC gathered Modelines:
[ 1630.333] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP)
[ 1630.333] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1630.333] (II) intel(0): Printing probed modes for output LVDS1
[ 1630.333] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz eP)
[ 1630.333] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1630.333] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1630.333] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1630.333] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1630.346] (II) intel(0): EDID for output VGA1
[ 1630.347] (II) intel(0): EDID for output HDMI1
[ 1630.389] (II) intel(0): EDID for output DP1
[ 1630.389] (II) intel(0): Output LVDS1 connected
[ 1630.389] (II) intel(0): Output VGA1 disconnected
[ 1630.389] (II) intel(0): Output HDMI1 disconnected
[ 1630.389] (II) intel(0): Output DP1 disconnected
[ 1630.389] (II) intel(0): Using exact sizes for initial modes
[ 1630.389] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 1630.389] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1630.389] (II) intel(0): Kernel page flipping support detected, enabling
[ 1630.389] (**) intel(0): Display dimensions: (310, 170) mm
[ 1630.389] (**) intel(0): DPI set to (111, 114)
[ 1630.389] (II) Loading sub module "fb"
[ 1630.390] (II) LoadModule: "fb"
[ 1630.390] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1630.390] (II) Module fb: vendor="X.Org Foundation"
[ 1630.390] compiled for 1.13.0, module version = 1.0.0
[ 1630.390] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1630.390] (II) Loading sub module "dri2"
[ 1630.390] (II) LoadModule: "dri2"
[ 1630.390] (II) Module "dri2" already built-in
[ 1630.390] (==) Depth 24 pixmap format is 32 bpp
[ 1630.390] (II) intel(0): [DRI2] Setup complete
[ 1630.390] (II) intel(0): [DRI2] DRI driver: i965
[ 1630.390] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 1630.391] (II) UXA(0): Driver registered support for the following operations:
[ 1630.391] (II) solid
[ 1630.391] (II) copy
[ 1630.391] (II) composite (RENDER acceleration)
[ 1630.391] (II) put_image
[ 1630.391] (II) get_image
[ 1630.391] (==) intel(0): Backing store disabled
[ 1630.391] (==) intel(0): Silken mouse enabled
[ 1630.391] (II) intel(0): Initializing HW Cursor
[ 1630.391] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1630.392] (==) intel(0): DPMS enabled
[ 1630.392] (==) intel(0): Intel XvMC decoder enabled
[ 1630.392] (II) intel(0): Set up textured video
[ 1630.393] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1630.393] (II) intel(0): direct rendering: DRI2 Enabled
[ 1630.393] (==) intel(0): hotplug detection: "enabled"
[ 1630.403] (--) RandR disabled
[ 1630.409] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1630.409] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1630.409] (II) AIGLX: enabled GLX_ARB_create_context
[ 1630.409] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1630.409] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1630.409] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1630.409] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1630.409] (II) AIGLX: Loaded and initialized i965
[ 1630.409] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1630.409] (II) intel(0): Setting screen physical size to 361 x 203
[ 1630.434] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 1630.434] (**) Power Button: Applying InputClass "system-keyboard"
[ 1630.434] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1630.434] (II) LoadModule: "evdev"
[ 1630.434] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1630.434] (II) Module evdev: vendor="X.Org Foundation"
[ 1630.434] compiled for 1.13.0, module version = 2.7.3
[ 1630.434] Module class: X.Org XInput Driver
[ 1630.434] ABI class: X.Org XInput driver, version 18.0
[ 1630.434] (II) Using input driver 'evdev' for 'Power Button'
[ 1630.434] (**) Power Button: always reports core events
[ 1630.434] (**) evdev: Power Button: Device: "/dev/input/event7"
[ 1630.434] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1630.434] (--) evdev: Power Button: Found keys
[ 1630.434] (II) evdev: Power Button: Configuring as keyboard
[ 1630.434] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 1630.434] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1630.434] (**) Option "xkb_rules" "evdev"
[ 1630.434] (**) Option "xkb_model" "pc105"
[ 1630.434] (**) Option "xkb_layout" "de"
[ 1630.434] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.449] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 1630.449] (**) Video Bus: Applying InputClass "system-keyboard"
[ 1630.449] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1630.449] (II) Using input driver 'evdev' for 'Video Bus'
[ 1630.449] (**) Video Bus: always reports core events
[ 1630.449] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 1630.449] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1630.449] (--) evdev: Video Bus: Found keys
[ 1630.449] (II) evdev: Video Bus: Configuring as keyboard
[ 1630.449] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:0a/input/input15/event15"
[ 1630.449] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1630.449] (**) Option "xkb_rules" "evdev"
[ 1630.449] (**) Option "xkb_model" "pc105"
[ 1630.449] (**) Option "xkb_layout" "de"
[ 1630.449] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.450] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1630.450] (**) Power Button: Applying InputClass "system-keyboard"
[ 1630.450] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1630.450] (II) Using input driver 'evdev' for 'Power Button'
[ 1630.450] (**) Power Button: always reports core events
[ 1630.450] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1630.450] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1630.450] (--) evdev: Power Button: Found keys
[ 1630.450] (II) evdev: Power Button: Configuring as keyboard
[ 1630.450] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input3/event3"
[ 1630.450] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 1630.450] (**) Option "xkb_rules" "evdev"
[ 1630.450] (**) Option "xkb_model" "pc105"
[ 1630.450] (**) Option "xkb_layout" "de"
[ 1630.450] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.450] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 1630.450] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 1630.450] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1630.450] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1630.450] (**) Sleep Button: always reports core events
[ 1630.450] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 1630.450] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 1630.450] (--) evdev: Sleep Button: Found keys
[ 1630.450] (II) evdev: Sleep Button: Configuring as keyboard
[ 1630.450] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event4"
[ 1630.450] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 1630.450] (**) Option "xkb_rules" "evdev"
[ 1630.450] (**) Option "xkb_model" "pc105"
[ 1630.450] (**) Option "xkb_layout" "de"
[ 1630.450] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.451] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 1630.451] (**) Video Bus: Applying InputClass "system-keyboard"
[ 1630.451] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1630.451] (II) Using input driver 'evdev' for 'Video Bus'
[ 1630.451] (**) Video Bus: always reports core events
[ 1630.451] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 1630.451] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1630.451] (--) evdev: Video Bus: Found keys
[ 1630.451] (II) evdev: Video Bus: Configuring as keyboard
[ 1630.451] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input14/event14"
[ 1630.451] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 1630.451] (**) Option "xkb_rules" "evdev"
[ 1630.451] (**) Option "xkb_model" "pc105"
[ 1630.451] (**) Option "xkb_layout" "de"
[ 1630.451] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.451] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 1630.451] (II) No input driver specified, ignoring this device.
[ 1630.451] (II) This device may have been added with another device file.
[ 1630.451] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1630.451] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 1630.451] (II) No input driver specified, ignoring this device.
[ 1630.451] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 1630.452] (II) No input driver specified, ignoring this device.
[ 1630.452] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 1630.452] (II) No input driver specified, ignoring this device.
[ 1630.452] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 1630.452] (II) No input driver specified, ignoring this device.
[ 1630.452] (II) This device may have been added with another device file.
[ 1630.452] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event1)
[ 1630.452] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1630.452] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 1630.452] (**) USB Optical Mouse: always reports core events
[ 1630.452] (**) evdev: USB Optical Mouse: Device: "/dev/input/event1"
[ 1630.452] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d80
[ 1630.452] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 1630.452] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 1630.452] (--) evdev: USB Optical Mouse: Found relative axes
[ 1630.452] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 1630.452] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 1630.452] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 1630.452] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1630.452] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1630.452] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input1/event1"
[ 1630.452] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 1630.452] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 1630.453] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 1630.453] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 1630.453] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1630.453] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 1630.453] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 1630.453] (II) No input driver specified, ignoring this device.
[ 1630.453] (II) This device may have been added with another device file.
[ 1630.453] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event9)
[ 1630.453] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
[ 1630.453] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[ 1630.453] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[ 1630.453] (**) Lenovo EasyCamera: always reports core events
[ 1630.453] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event9"
[ 1630.453] (--) evdev: Lenovo EasyCamera: Vendor 0xbda Product 0x58e6
[ 1630.453] (--) evdev: Lenovo EasyCamera: Found keys
[ 1630.453] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[ 1630.453] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input9/event9"
[ 1630.453] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 12)
[ 1630.453] (**) Option "xkb_rules" "evdev"
[ 1630.453] (**) Option "xkb_model" "pc105"
[ 1630.453] (**) Option "xkb_layout" "de"
[ 1630.453] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.454] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1630.454] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 1630.454] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1630.454] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1630.454] (**) AT Translated Set 2 keyboard: always reports core events
[ 1630.454] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1630.454] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1630.454] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1630.454] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1630.454] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1630.454] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 1630.454] (**) Option "xkb_rules" "evdev"
[ 1630.454] (**) Option "xkb_model" "pc105"
[ 1630.454] (**) Option "xkb_layout" "de"
[ 1630.454] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.454] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 1630.454] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1630.454] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[ 1630.454] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1630.454] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event13"
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[ 1630.454] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[ 1630.454] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[ 1630.454] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[ 1630.454] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1630.454] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event13"
[ 1630.454] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 1630.454] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1630.455] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1630.455] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 1630.455] (II) No input driver specified, ignoring this device.
[ 1630.455] (II) This device may have been added with another device file.
[ 1630.455] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event6)
[ 1630.455] (**) Ideapad extra buttons: Applying InputClass "system-keyboard"
[ 1630.455] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[ 1630.455] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[ 1630.455] (**) Ideapad extra buttons: always reports core events
[ 1630.455] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event6"
[ 1630.455] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[ 1630.455] (--) evdev: Ideapad extra buttons: Found keys
[ 1630.455] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[ 1630.455] (**) Option "config_info" "udev:/sys/devices/platform/ideapad/input/input6/event6"
[ 1630.455] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 15)
[ 1630.455] (**) Option "xkb_rules" "evdev"
[ 1630.455] (**) Option "xkb_model" "pc105"
[ 1630.455] (**) Option "xkb_layout" "de"
[ 1630.455] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 1630.456] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 1630.456] (II) No input driver specified, ignoring this device.
[ 1630.456] (II) This device may have been added with another device file.
[ 1630.683] (II) evdev: Ideapad extra buttons: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Lenovo EasyCamera: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: USB Optical Mouse: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Video Bus: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Sleep Button: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Power Button: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Video Bus: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1630.683] (II) evdev: Power Button: Close
[ 1630.683] (II) UnloadModule: "evdev"
[ 1631.376] Server terminated successfully (0). Closing log file.
Could anyone give me some ideas?
Lenovo Y471A-ifi
Arch x86_64 KDE Vim zsh
To enjoy brand new start
Offline
well, consolekit is not part of archlinux anymore. Maybe it is messing around. Try uninstalling it
Offline
@ ssfdust, please use code tags instead of quote tags, or use a pastebin.
Offline
Can you start kdm from the console? Try deleting /etc/systemd/system/display-manager.service then re-enable the kdm service
Offline
Thanks for your help.KDE runs..It seems problems with dbus.I set variable DISPLAY to :0.And then run X and startkde.It runs successfully..
Lenovo Y471A-ifi
Arch x86_64 KDE Vim zsh
To enjoy brand new start
Offline
Hey! What did yoy do exactly to fix the problem? I've been trying since yesterday and I can't start KDE. kdm.service is running, I made a symlink to graphical.target and everything seems to be fine, there are no errors when I boot but I see:
[OK] Reached target level Multi-User.
[OK] Reached target Graphical Interface.
And that's it.
If I run startx, I get:
(...)
xinit: unable to connect to X server: No such file or directory
xinit: server error
And if I run startkde I get the same error you got:
$DISPLAY is not set or cannot connect to the X server.
I really don't know what else to try.
By the way, I'm running Xorg 1.12 and Catalyst 12.11.
Last edited by AnnS (2012-12-08 19:56:53)
Acer Aspire 7741G-6426 | Intel Core i5-480M 2.66GHz | 8GB RAM DDR3 1333MHz | 640GB HDD 5400RPM | AMD Radeon 6550M 1GB DDR3 |
Lenovo 3000 C200 | Intel Core 2 Duo T5500 1.66GHz | 2GB RAM DDR2 667MHz | 250GB HDD 5400RPM | Intel GMA 950 |
Offline
I think your problem 'may' be related to the problem I had. I start KDE with `startx`. Without full systemd, ~/.xinitrc looked like this...
exec ck-launch-session startkde
It would not start like that with full systemd (I assume ck stands for ConsoleKit). I had to change .xinitrc to this, to make startx work.
exec startkde
Maybe somewhere KDM had the ConsoleKit config in some file, and that is why it will not start KDE. Maybe first see if KDE will boot with startx and the ~/.xinitrc config I shown here. If it dose, then remove KDM with pacman. Search for all KDM config files and remove them. Then reinstall KDM.
Last edited by hunterthomson (2012-12-08 20:04:27)
OpenBSD-current Thinkpad X230, i7-3520M, 16GB CL9 Kingston, Samsung 830 256GB
Contributor: linux-grsec
Offline
Hi! I did try that, even though II started KDE with the inittab file. But I also tried editing .xinitrc and uncommenting exec startkde, but I still get the errors above when I use startx or startkde.
I also tried reinstalling kdebase-workspace and removing configuration files, but nothing. I actually doubt it's related to KDE, I think it's either xorg and/or catalyst.
There must be something I'm missing.
Thanks!
Acer Aspire 7741G-6426 | Intel Core i5-480M 2.66GHz | 8GB RAM DDR3 1333MHz | 640GB HDD 5400RPM | AMD Radeon 6550M 1GB DDR3 |
Lenovo 3000 C200 | Intel Core 2 Duo T5500 1.66GHz | 2GB RAM DDR2 667MHz | 250GB HDD 5400RPM | Intel GMA 950 |
Offline
Hi! I did try that, even though II started KDE with the inittab file. But I also tried editing .xinitrc and uncommenting exec startkde, but I still get the errors above when I use startx or startkde.
I also tried reinstalling kdebase-workspace and removing configuration files, but nothing. I actually doubt it's related to KDE, I think it's either xorg and/or catalyst.
There must be something I'm missing.
Thanks!
Catalyst? It looks like xorg is trying to use an Intel video card?
Do you have both ATI and Intel video card in your sytem?
Maybe I am worng...
Last edited by hunterthomson (2012-12-09 00:55:23)
OpenBSD-current Thinkpad X230, i7-3520M, 16GB CL9 Kingston, Samsung 830 256GB
Contributor: linux-grsec
Offline
AnnS wrote:Hi! I did try that, even though II started KDE with the inittab file. But IIt seems problems with dbus.I set variable DISPLAY to :0.And then run X and startkde.It runs successfullyalso tried editing .xinitrc and uncommenting exec startkde, but I still get the errors above when I use startx or startkde.
I also tried reinstalling kdebase-workspace and removing configuration files, but nothing. I actually doubt it's related to KDE, I think it's either xorg and/or catalyst.
There must be something I'm missing.
Thanks!Catalyst? It looks like xorg is trying to use an Intel video card?
Do you have both ATI and Intel video card in your sytem?Maybe I am worng...
What makes you think that?
I'm not the OP, by the way! He/she solved this and apparently had the same problem. His/her last post said "
It seems problems with dbus.I set variable DISPLAY to :0.And then run X and startkde.It runs successfully"
But I'm not sure of how to do that.
Acer Aspire 7741G-6426 | Intel Core i5-480M 2.66GHz | 8GB RAM DDR3 1333MHz | 640GB HDD 5400RPM | AMD Radeon 6550M 1GB DDR3 |
Lenovo 3000 C200 | Intel Core 2 Duo T5500 1.66GHz | 2GB RAM DDR2 667MHz | 250GB HDD 5400RPM | Intel GMA 950 |
Offline
hunterthomson wrote:AnnS wrote:Hi! I did try that, even though II started KDE with the inittab file. But IIt seems problems with dbus.I set variable DISPLAY to :0.And then run X and startkde.It runs successfullyalso tried editing .xinitrc and uncommenting exec startkde, but I still get the errors above when I use startx or startkde.
I also tried reinstalling kdebase-workspace and removing configuration files, but nothing. I actually doubt it's related to KDE, I think it's either xorg and/or catalyst.
There must be something I'm missing.
Thanks!Catalyst? It looks like xorg is trying to use an Intel video card?
Do you have both ATI and Intel video card in your sytem?Maybe I am worng...
What makes you think that?
I'm not the OP, by the way! He/she solved this and apparently had the same problem. His/her last post said "
It seems problems with dbus.I set variable DISPLAY to :0.And then run X and startkde.It runs successfully"But I'm not sure of how to do that.
Owe sorry, I thought you were the OP. I got lost in the OP's super long Quote's.
I said that becuase the OP is running an Intel Video card
[ 1630.275] (II) LoadModule: "intel"
[ 1630.275] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
Last edited by hunterthomson (2012-12-09 05:32:18)
OpenBSD-current Thinkpad X230, i7-3520M, 16GB CL9 Kingston, Samsung 830 256GB
Contributor: linux-grsec
Offline
Well, at least in my case, it was apparently related to Catalyst from the unnoficial repository (Vi0l0's, which I've been using for over a year). I wanted to try and so installed Catalyst from the community repo and everything is well. I really don't understand the difference, why this works and the other does not, but until I do, I'll keep using the one from the official repository.
Thanks!
Last edited by AnnS (2012-12-09 18:29:55)
Acer Aspire 7741G-6426 | Intel Core i5-480M 2.66GHz | 8GB RAM DDR3 1333MHz | 640GB HDD 5400RPM | AMD Radeon 6550M 1GB DDR3 |
Lenovo 3000 C200 | Intel Core 2 Duo T5500 1.66GHz | 2GB RAM DDR2 667MHz | 250GB HDD 5400RPM | Intel GMA 950 |
Offline
Pages: 1