You are not logged in.
description: Notebook
product: HP Pavilion dv6 Notebook PC (LC952EA#ABZ)
vendor: Hewlett-Packard
Currently running on 3.6.6-1
Powertop displays allot of bad!
http://pastie.org/5344140 (audio 100% is this normal)?
Device stats : http://pastie.org/5344143 (again allot of 100%)
Got allot of "BAD" http://pastie.org/5344146
sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +49.0 C (crit = +99.0 C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +61.0 C (high = +86.0 C, crit = +100.0 C)
Core 0: +61.0 C (high = +86.0 C, crit = +100.0 C)
Core 1: +54.0 C (high = +86.0 C, crit = +100.0 C)
Normally it runs at 40
Basically the questions are 2,
1) What should I do to bring back the temperature to around 40?
2) What should I do to tun up the powertop suggestions?
thanks.
Last edited by r0b0t (2012-11-09 11:48:35)
Offline
I don't know about the other bits of output you posted. I don't use those tools, but it stands out that 100% in a line of units/sec could just mean the audio device is using 100% of what the audio device is capable of ... which sounds reasonable if it is in use.
But the reason I posted was to ask why you think those temperatures are a problem. They seem perfectly normal to me. You have 25 degrees C left before you even get into the "high" range, and you are no where near critical. 61.0 C is perfectly in the normal range for most of the processors I've used.
"UNIX is simple and coherent..." - Dennis Ritchie, "GNU's Not UNIX" - Richard Stallman
Offline
Yey, what you say makes actually sense, however after the last upgrades I got +10° on temperature and just to mention the fan makes crazy noise trying to cool the processor, and the last time I was speaking with a friend and I was near my notebook he said if I was in a server farm I replied, nope it's just my notebook.
PS: on windoze I get allot less hotness , I know that linux is 2 hot but this is 3 or 4 hot man
Offline
bump
anybody on this?
Offline
Adapter: ISA adapter
Physical id 0: +70.0 C (high = +86.0 C, crit = +100.0 C)
Core 0: +63.0 C (high = +86.0 C, crit = +100.0 C)
Core 1: +70.0 C (high = +86.0 C, crit = +100.0 C)
Offline
bump
anybody on this?
Do you use laptop-mode-tools?
Offline
Regarding the "bad" tunables, what have you done about them? That stuff needs to be configured...
Somebody else posted output the other day showing the "ondemand" governor being marked as "bad" by powertop. I don't understand this. That is the recommended governor and powertop usually marks it as "good" (and anything else as "bad").
But the other stuff looks default to me. You have to configure it if you want it to be different.
(I have a couple of "bad" tunables myself as I haven't figured it out but the majority is covered in the wiki.)
There are also several existing threads about this.
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
Somebody else posted output the other day showing the "ondemand" governor being marked as "bad" by powertop. I don't understand this. That is the recommended governor and powertop usually marks it as "good" (and anything else as "bad").
I think this is the same person, with the same post actually, just starting a thread instead of in the midst of one.
Offline
r0b0t wrote:bump
anybody on this?Do you use laptop-mode-tools?
yes I do and I know that all those bad's need a fix but don't know how.
Last edited by r0b0t (2012-11-17 17:17:01)
Offline
Have you *configured* laptop-mode-tools? Have you read the wiki for the package? Have you read the wiki for advice on power management? Have you tried anything at all?
CLI Paste | How To Ask Questions
Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L
Offline
Yes, at least when I first instaleld it, however I just installed yesterday:
[2012-11-18 23:13] upgraded ati-dri (9.0-1 -> 9.0.1-1)
[2012-11-18 23:13] upgraded libglapi (9.0-1 -> 9.0.1-1)
[2012-11-18 23:13] upgraded libgl (9.0-1 -> 9.0.1-1)
[2012-11-18 23:13] upgraded intel-dri (9.0-1 -> 9.0.1-1)
and today everything is fine:
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +45.0 C (high = +86.0 C, crit = +100.0 C)
Core 0: +45.0 C (high = +86.0 C, crit = +100.0 C)
Core 1: +45.0 C (high = +86.0 C, crit = +100.0 C)
Offline