You are not logged in.

#1 2012-11-15 15:15:48

Munchor
Member
Registered: 2012-10-29
Posts: 54

Steam trace/breakpoint trap

Installing breakpad exception handler for appid(steam)/version(1352937750_client)
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
main.cpp (423) : Assertion Failed: Looks like steam didn't shutdown cleanly, scheduling immediate update check
Assert( Assertion Failed: Looks like steam didn't shutdown cleanly, scheduling immediate update check ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamexe/./main.cpp:423

Installing breakpad exception handler for appid(steam)/version(1.0)
Uploading dump (in-process) [proxy '']
/tmp/dumps/assert_20121115151234_1.dmp
success = yes
response:  CrashID=bp-b789b2fb-cfc4-4338-a8f9-da0e72121115

Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
unlinked 0 orphaned pipes
removing stale semaphore last operated on by process 1953 with name 0eBlobRegistryMutex_5F56F11214E729C6F309CAA6A58DF9F4
removing stale semaphore last operated on by process 1953 with name 0eBlobRegistrySignal_5F56F11214E729C6F309CAA6A58DF9F4
removing stale semaphore last operated on by process 1953 with name 0emSteamEngineInstance
removing stale semaphore last operated on by process 1953 with name 0eSteamEngineLock
Installing breakpad exception handler for appid(steam)/version(1.0)
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
[1115/151236:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
PulseAudio connect failed (used only for Mic Volume Control) with error: Access denied
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GL: [API][ERROR][HIGH][0]: GL_INVALID_ENUM in glTexParameter(pname=GL_TEXTURE_MAX_ANISOTROPY_EXT)
/home/david/Steam/steam.sh: line 128:  2111 Trace/breakpoint trap   ${DEBUGGER} "${STEAMROOT}"/${PLATFORM}/${STEAMEXE} "$@"

I just installed steam from [community] and I'm getting all those erors until it crashes. I have Intel Graphics Card and open source drivers. I installed lib32-intel-dri too and I am on Openbox, 64bits.

Any ideas on what's wrong? Thanks.

Offline

#2 2012-11-16 15:02:06

goldfish777
Member
Registered: 2012-11-04
Posts: 32

Re: Steam trace/breakpoint trap

I'm getting the same error message. sad

Offline

#3 2012-11-16 20:22:55

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

Bump! Anybody else, any ideas?

Offline

#4 2012-11-19 19:06:44

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

Bumpity bump?

Offline

#5 2012-11-19 19:25:03

WorMzy
Forum Moderator
From: Scotland
Registered: 2010-06-16
Posts: 11,784
Website

Re: Steam trace/breakpoint trap

Munchor wrote:

Bumpity bump?

No.


Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Offline

#6 2012-11-19 19:31:41

Strike0
Member
From: Germany
Registered: 2011-09-05
Posts: 1,429

Re: Steam trace/breakpoint trap

Did you write anywhere which GPU you use?
Maybe you need this also: https://www.archlinux.org/packages/extr … el-driver/

Offline

#7 2012-11-20 14:26:41

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

Here's some more information:

~> steam
Installing breakpad exception handler for appid(steam)/version(1352937750_client)
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
Installing breakpad exception handler for appid(steam)/version(1.0)
unlinked 0 orphaned pipes
Installing breakpad exception handler for appid(steam)/version(1.0)
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
[1120/142326:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
PulseAudio connect failed (used only for Mic Volume Control) with error: Access denied
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GL: [API][ERROR][HIGH][0]: GL_INVALID_ENUM in glTexParameter(pname=GL_TEXTURE_MAX_ANISOTROPY_EXT)
/home/david/Steam/steam.sh: line 128:  4981 Trace/breakpoint trap   ${DEBUGGER} "${STEAMROOT}"/${PLATFORM}/${STEAMEXE} "$@"

Also, every time I try to open steam I get this error and then the mouse cursor fails to appear. This is, I can't see the mouse cursor now unless I restart X. I can see the Mouse Hovering Link cursor and the mouse_on_textbox cursor, but not the main pointer.

EDIT
I went ahead and tried this on Gnome Shell, and I got this instead:

Installing breakpad exception handler for appid(steam)/version(1352937750_client)
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
main.cpp (423) : Assertion Failed: Looks like steam didn't shutdown cleanly, scheduling immediate update check
Assert( Assertion Failed: Looks like steam didn't shutdown cleanly, scheduling immediate update check ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamexe/./main.cpp:423

Installing breakpad exception handler for appid(steam)/version(1.0)
Uploading dump (in-process) [proxy '']
/tmp/dumps/assert_20121120142826_1.dmp
success = yes
response:  CrashID=bp-c7b2fb34-dc5e-4e4d-ba89-463e52121120

Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1353371323_client)
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
SteamUpdateUI: An X Error occurred
X Error of failed request:  BadMatch (invalid parameter attributes)
Major opcode of failed request:  154
(which is )
Minor opcode of failed request:  26
Serial number of failed request:  24
xerror_handler: X failed, continuing

Now it is just sitting there for a few minutes, no Steam window opened. I was using Openbox before.

Last edited by Munchor (2012-11-20 14:31:57)

Offline

#8 2012-11-22 19:40:21

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

I have more info. If I boot Ubuntu from a USB Drive on the same computer, Steam opens. So it's an Arch-related issue.

Offline

#9 2012-11-23 23:54:16

ollytheninja
Member
Registered: 2012-11-23
Posts: 3

Re: Steam trace/breakpoint trap

Same issue here,

/home/oliver/Steam/steam.sh: line 132: gksudo: command not found
Installing breakpad exception handler for appid(steam)/version(1353457964_client)
libGL error: failed to load driver: i915
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
Looks like steam didn't shutdown cleanly, scheduling immediate update check
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
unlinked 0 orphaned pipes
Installing breakpad exception handler for appid(steam)/version(1.0)
libGL error: failed to load driver: i915
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
Installing breakpad exception handler for appid(steam)/version(1.0)
[1123/235029:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
Installing breakpad exception handler for appid(steam)/version(1.0)
[1123/235031:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GLError: 1280
GL: [API][ERROR][HIGH][0]: GL_INVALID_ENUM in glTexParameter(pname=GL_TEXTURE_MAX_ANISOTROPY_EXT)
/home/oliver/Steam/steam.sh: line 255:  1272 Trace/breakpoint trap   $DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@"

Have tried Intel drivers mentioned above,
it started up fine the first time and downloaded updates, now this.

Offline

#10 2012-11-24 05:38:09

spiritwalker
Member
From: USA
Registered: 2010-07-15
Posts: 85

Re: Steam trace/breakpoint trap

EDIT: my bad, someone had already mentioned it.

You need to install the 32-bit driver for your video card:

sudo pacman -Ss lib32 dri

I have an intel video card, so I did this:

sudo pacman -S lib32-intel-dri

Last edited by spiritwalker (2012-11-24 05:43:18)

Offline

#11 2012-11-24 09:10:44

ollytheninja
Member
Registered: 2012-11-23
Posts: 3

Re: Steam trace/breakpoint trap

Yes, that fixed it! Thank you!
Now to fix firefox, somehow managed to break it trying to get steam working...

Offline

#12 2012-11-24 14:27:02

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

I already have it installed, steam doesn't work even if I reinstall it.

Offline

#13 2012-11-25 08:12:12

ollytheninja
Member
Registered: 2012-11-23
Posts: 3

Re: Steam trace/breakpoint trap

Are you sure you installed the right one for your graphics card?

Offline

#14 2012-11-25 18:20:01

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

ollytheninja wrote:

Are you sure you installed the right one for your graphics card?

Yes, I also have an Intel Graphics Card.

~> steam
Installing breakpad exception handler for appid(steam)/version(1353371323_client)
libGL error: failed to load driver: i965
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
SteamUpdateUI: An X Error occurred
X Error of failed request:  BadMatch (invalid parameter attributes)
Major opcode of failed request:  154
(which is )
Minor opcode of failed request:  26
Serial number of failed request:  24
xerror_handler: X failed, continuing
^C
exit 130
~> 

Last edited by Munchor (2012-11-25 18:20:44)

Offline

#15 2012-11-25 22:20:37

Nihathrael
Member
From: Freising, Germany
Registered: 2007-10-21
Posts: 82
Website

Re: Steam trace/breakpoint trap

Adding myself to the "video" group helped for me.


Unknown Horizons - Open source real-time strategy game with the comfy Anno 1602 feeling!

Offline

#16 2012-11-26 19:46:34

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

usermod -a -G video david

I did that, and it didn't work. Any ideas?

Last edited by Munchor (2012-11-26 19:47:30)

Offline

#17 2012-11-29 19:29:18

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

There was an update on aur/steam today, I updated but it didn't fix it yet.

Offline

#18 2012-11-30 18:51:19

Strike0
Member
From: Germany
Registered: 2011-09-05
Posts: 1,429

Re: Steam trace/breakpoint trap

Is the "i965" module loaded before you try to run it?

Offline

#19 2012-12-01 19:06:32

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

I'm not sure... "lsmod" doesn't output it.

Offline

#20 2012-12-02 02:01:41

Strike0
Member
From: Germany
Registered: 2011-09-05
Posts: 1,429

Re: Steam trace/breakpoint trap

And, coincidently, your steam output prints loading the module as an error ..
which was the reason for my question in post #6 that you never answered.
You may want to look into that.

Offline

#21 2012-12-02 23:19:37

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

Strike0 wrote:

Did you write anywhere which GPU you use?
Maybe you need this also: https://www.archlinux.org/packages/extr … el-driver/

Regarding #6, I have that library installed already. Reinstalled, tried again, no luck.

Offline

#22 2012-12-08 17:12:11

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

New aur/steam update, still doesn't work.

Offline

#23 2012-12-09 12:29:03

Strike0
Member
From: Germany
Registered: 2011-09-05
Posts: 1,429

Re: Steam trace/breakpoint trap

Offline

#24 2012-12-13 16:50:15

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

I went ahead and looked at that, but I can't even the packages he's talking about.

Anyways, new aur/steam update and still no work.

Offline

#25 2012-12-14 08:14:32

Munchor
Member
Registered: 2012-10-29
Posts: 54

Re: Steam trace/breakpoint trap

Yet another aur/steam update this morning, still no luck.

~> steam
Installing breakpad exception handler for appid(steam)/version(1353371323_client)
SteamUpdateUI: An X Error occurred
X Error of failed request:  BadMatch (invalid parameter attributes)
Major opcode of failed request:  154
(which is )
Minor opcode of failed request:  26
Serial number of failed request:  22
xerror_handler: X failed, continuing

Last edited by Munchor (2012-12-20 01:29:46)

Offline

Board footer

Powered by FluxBB