Arch Linux

atze

Member

From: Netherlands (Leiden)

Registered: 2005-10-22

Posts: 76

Website

[solved][kernel-modules] snd-es1968 problems

Hello everybody,

Ive installed Arch .7 (using kernel 2.6.10-3 ) on my laptop, almost everything just runs great, really it rocks but there is only one problem. I cant get my sound working. This is what i did

* pacman -S alsa stuff
* alsaconf  -> detected maestro2 which means the snd-es1968 module, alsaconf automaticly added this to modprobe

Then i tried to modprobe the snd-es1968 module. The result was that my system totaly hang. Well after an reboot, i check if the module was automaticly loaded (is was configured in modprobe.conf) but it didn't. I checked the forums and found something like kernel26mm.
So i grabed kernel26mm (which is 2.6.13.rc5.mm1-1) with pacman plugged into grub en rebooted again. Result no snd-module loaded. When i tried modprobe snd-es1968 i get a lot of error, it looks kinda like this.

[root@mara atze]# modprobe snd-es1968
WARNING: Error inserting snd (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_seq_device (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/seq/snd-seq-device.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_rawmidi (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/snd-rawmidi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_mpu401_uart (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd_timer (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/snd-timer.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting snd_pcm (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/snd-pcm.ko): Unknown symbol in module, or unknown parameter (see dmesg)
WARNING: Error inserting snd (/lib/modules/2.6.13-rc5-mm1-ARCH/kernel/sound/core/snd.ko): Unknown symbol in module, or unknown parameter (see dmesg)

There are a lot more errors, this is just the beginning. checking dmesg gives me this

[atze@mara ~]$ dmesg 
nd_timer: Unknown symbol snd_device_new
[17179906.148000] snd_timer: Unknown symbol snd_info_unregister
[17179906.148000] snd_timer: Unknown symbol snd_register_device
[17179906.192000] snd: Unknown parameter `device_mode'
[17179906.192000] snd_timer: Unknown symbol snd_info_register
[17179906.196000] snd_timer: Unknown symbol snd_info_create_module_entry
[17179906.196000] snd_timer: Unknown symbol snd_info_free_entry
[17179906.196000] snd_timer: Unknown symbol snd_iprintf
[17179906.196000] snd_timer: Unknown symbol snd_ecards_limit
[17179906.196000] snd_timer: Unknown symbol snd_oss_info_register
[17179906.196000] snd_timer: Unknown symbol snd_unregister_device
[17179906.200000] snd_timer: Unknown symbol snd_device_new
[17179906.200000] snd_timer: Unknown symbol snd_info_unregister
[17179906.200000] snd_timer: Unknown symbol snd_register_device
[17179906.204000] snd_pcm: Unknown symbol snd_info_register
[17179906.204000] snd_pcm: Unknown symbol snd_info_create_module_entry
[17179906.204000] snd_pcm: Unknown symbol snd_timer_notify

There is more output but that wil fill your screen to much i think.

Has anybody any idea how to solve this problem (with out recompiling a kernel if possible)?

greetinx Atze

dtw

Forum Fellow

From: UK

Registered: 2004-08-03

Posts: 4,439

Website

Re: [solved][kernel-modules] snd-es1968 problems

did you run alsaconf again after updating the kernel to kernel26mm?  That often solves these unknown module issues

atze

Member

From: Netherlands (Leiden)

Registered: 2005-10-22

Posts: 76

Website

Re: [solved][kernel-modules] snd-es1968 problems

acually i didn't, but i found some on the forum about a kernel26archck. I pacmaned it and everything works great know. Now my system is totally rocking hard.

Greetinx Atze