You are not logged in.

#1 2012-12-03 22:26:14

Thisguy_
Member
Registered: 2012-12-03
Posts: 37

[Solved]Gnome - Bottom of screen untouchable until resolution adjusted

I've looked through the Gnome extensions database and can't seem to find a fix in that form, so I'll come to you guys. When I first start the X server (I do this manually, if that helps) and hit Super to open the gnome main menu, the bottom bar, which I am mysteriously unable to screenshot, is enlarged, and anything below a certain point on the screen (at any point, not just while I'm in the main menu) cannot be clicked. This is fixed when I change the resolution to the next lowest setting and stays fixed when I change back to the right screen resolution. Does anyone have any idea what may be causing it? I can certainly live with it, but it gets annoying to adjust resolution every time I want to engage pretty mode.

EDIT: The problem was an outdated Gnome extension.

Last edited by Thisguy_ (2012-12-09 01:40:13)

Offline

#2 2012-12-05 22:10:52

Thisguy_
Member
Registered: 2012-12-03
Posts: 37

Re: [Solved]Gnome - Bottom of screen untouchable until resolution adjusted

Bump smile

Offline

#3 2012-12-06 23:52:23

Thisguy_
Member
Registered: 2012-12-03
Posts: 37

Re: [Solved]Gnome - Bottom of screen untouchable until resolution adjusted

Another friendly round of bringing up my post wink

Offline

#4 2012-12-07 07:52:52

mariusmeyer
Member
From: Norway
Registered: 2009-04-25
Posts: 244

Re: [Solved]Gnome - Bottom of screen untouchable until resolution adjusted

Could you try starting gnome from gdm and see if the problem still occurs? What graphics card do you have? Have you configured it in any special way? Starting X manually, do you mean with 'startx'? In that case, what is your .xinitrc?

See, there is lots of things you could have put in those two last posts besides "bump" wink

Offline

#5 2012-12-07 16:40:35

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 13,825

Re: [Solved]Gnome - Bottom of screen untouchable until resolution adjusted

In general, a lack of response is an indication there is not enough information.  Rather than just bumping (in violation of our policy), may I suggest you provide more information.

Examples:
You did not mention what video chip set your system uses.
What are the resolutions you were using.
What is your pointing device? (mouse, touch pad, touch screen, tablet)
Maybe posting your /var/log/Xorg.0.log (using BBCode code tags, of course smile )

Thanks.


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
You assume people are rational and influenced by evidence.  You must not work with the public much. -- Trilby
----
How to Ask Questions the Smart Way

Offline

#6 2012-12-08 20:05:58

Thisguy_
Member
Registered: 2012-12-03
Posts: 37

Re: [Solved]Gnome - Bottom of screen untouchable until resolution adjusted

mariusmeyer wrote:

What graphics card do you have?

Intel Sandybridge Mobile.

mariusmeyer wrote:

Have you configured it in any special way?

Not at all.

mariusmeyer wrote:

Starting X manually, do you mean with 'startx'?

Indeed.

mariusmeyer wrote:

In that case, what is your .xinitrc?

#!/bin/sh

# Source scripts in /etc/X11/xinit/xinitrc.d/
if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
        [ -x "$f" ] && . "$f"
    done
    unset f
fi

exec gnome-session

Except for exec gnome-session, I have no idea what any of it means, I'm sorry to say.

mariusmeyer wrote:

See, there is lots of things you could have put in those two last posts besides "bump" wink

Terribly sorry! I was unaware we were not allowed to bump! tongue

EDIT:

ewaller wrote:

What are the resolutions you were using.

1366x768 (16:9) is the resolution I am set to, and I switch to 1024x768 (4:3) for a split second then hit "restore previous configuration" to go back to 16:9.

ewaller wrote:

What is your pointing device? (mouse, touch pad, touch screen, tablet)

I really don't think this is it, since it also renders notify-send too high as well as moving the notification area bar too high.

ewaller wrote:

Maybe posting your /var/log/Xorg.0.log (using BBCode code tags, of course smile )

There's a \80 in there that shouldn't be taken literally; Gedit couldn't figure out what it was. Here ya go:

[   128.255] 
X.Org X Server 1.13.0
Release Date: 2012-09-05
[   128.256] X Protocol Version 11, Revision 0
[   128.257] Build Operating System: Linux 3.6.3-1-ARCH x86_64 
[   128.257] Current Operating System: Linux hostname 3.6.9-1-ARCH #1 SMP PREEMPT Tue Dec 4 08:04:10 CET 2012 x86_64
[   128.257] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4e7ca63e-3b9a-4797-abc7-d4ccb8d1a252 ro quiet
[   128.258] Build Date: 08 November 2012  07:09:29PM
[   128.259]  
[   128.259] Current version of pixman: 0.28.0
[   128.260] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   128.261] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   128.263] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec  8 10:08:27 2012
[   128.343] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   128.379] (==) No Layout section.  Using the first Screen section.
[   128.379] (==) No screen section available. Using defaults.
[   128.379] (**) |-->Screen "Default Screen Section" (0)
[   128.379] (**) |   |-->Monitor "<default monitor>"
[   128.379] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   128.379] (==) Automatically adding devices
[   128.379] (==) Automatically enabling devices
[   128.379] (==) Automatically adding GPU devices
[   128.488] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   128.488] 	Entry deleted from font path.
[   128.506] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   128.506] 	Entry deleted from font path.
[   128.506] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   128.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   128.507] 	Entry deleted from font path.
[   128.507] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   128.507] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[   128.507] (==) ModulePath set to "/usr/lib/xorg/modules"
[   128.507] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   128.507] (II) Loader magic: 0x7fcc40
[   128.507] (II) Module ABI versions:
[   128.507] 	X.Org ANSI C Emulation: 0.4
[   128.507] 	X.Org Video Driver: 13.1
[   128.507] 	X.Org XInput driver : 18.0
[   128.507] 	X.Org Server Extension : 7.0
[   128.507] (II) config/udev: Adding drm device (/dev/dri/card0)
[   128.509] (--) PCI:*(0:0:2:0) 8086:0116:1028:0504 rev 9, Mem @ 0xf6800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[   128.509] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   128.516] Initializing built-in extension Generic Event Extension
[   128.517] Initializing built-in extension SHAPE
[   128.517] Initializing built-in extension MIT-SHM
[   128.518] Initializing built-in extension XInputExtension
[   128.519] Initializing built-in extension XTEST
[   128.519] Initializing built-in extension BIG-REQUESTS
[   128.520] Initializing built-in extension SYNC
[   128.520] Initializing built-in extension XKEYBOARD
[   128.521] Initializing built-in extension XC-MISC
[   128.521] Initializing built-in extension SECURITY
[   128.522] Initializing built-in extension XINERAMA
[   128.522] Initializing built-in extension XFIXES
[   128.523] Initializing built-in extension RENDER
[   128.524] Initializing built-in extension RANDR
[   128.524] Initializing built-in extension COMPOSITE
[   128.525] Initializing built-in extension DAMAGE
[   128.525] Initializing built-in extension MIT-SCREEN-SAVER
[   128.526] Initializing built-in extension DOUBLE-BUFFER
[   128.526] Initializing built-in extension RECORD
[   128.527] Initializing built-in extension DPMS
[   128.527] Initializing built-in extension X-Resource
[   128.528] Initializing built-in extension XVideo
[   128.528] Initializing built-in extension XVideo-MotionCompensation
[   128.529] Initializing built-in extension XFree86-VidModeExtension
[   128.529] Initializing built-in extension XFree86-DGA
[   128.530] Initializing built-in extension XFree86-DRI
[   128.530] Initializing built-in extension DRI2
[   128.530] (II) LoadModule: "glx"
[   128.581] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   128.599] (II) Module glx: vendor="X.Org Foundation"
[   128.599] 	compiled for 1.13.0, module version = 1.0.0
[   128.599] 	ABI class: X.Org Server Extension, version 7.0
[   128.599] (==) AIGLX enabled
[   128.600] Loading extension GLX
[   128.600] (==) Matched intel as autoconfigured driver 0
[   128.600] (==) Matched intel as autoconfigured driver 1
[   128.600] (==) Matched vesa as autoconfigured driver 2
[   128.600] (==) Matched modesetting as autoconfigured driver 3
[   128.600] (==) Matched fbdev as autoconfigured driver 4
[   128.600] (==) Assigned the driver to the xf86ConfigLayout
[   128.600] (II) LoadModule: "intel"
[   128.600] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   128.661] (II) Module intel: vendor="X.Org Foundation"
[   128.661] 	compiled for 1.13.0.901, module version = 2.20.14
[   128.661] 	Module class: X.Org Video Driver
[   128.661] 	ABI class: X.Org Video Driver, version 13.1
[   128.661] (II) LoadModule: "vesa"
[   128.661] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   128.665] (II) Module vesa: vendor="X.Org Foundation"
[   128.665] 	compiled for 1.13.0, module version = 2.3.2
[   128.665] 	Module class: X.Org Video Driver
[   128.665] 	ABI class: X.Org Video Driver, version 13.0
[   128.665] (II) LoadModule: "modesetting"
[   128.701] (WW) Warning, couldn't open module modesetting
[   128.701] (II) UnloadModule: "modesetting"
[   128.701] (II) Unloading modesetting
[   128.701] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   128.701] (II) LoadModule: "fbdev"
[   128.702] (WW) Warning, couldn't open module fbdev
[   128.702] (II) UnloadModule: "fbdev"
[   128.702] (II) Unloading fbdev
[   128.702] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   128.702] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[   128.702] (II) VESA: driver for VESA chipsets: vesa
[   128.702] (++) using VT number 1

[   128.703] (II) intel(0): using device path '/dev/dri/card0'
[   128.703] (WW) Falling back to old probe method for vesa
[   128.703] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   128.703] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   128.703] (==) intel(0): RGB weight 888
[   128.703] (==) intel(0): Default visual is TrueColor
[   128.703] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[   128.703] (**) intel(0): Relaxed fencing enabled
[   128.703] (**) intel(0): Wait on SwapBuffers? enabled
[   128.703] (**) intel(0): Triple buffering? enabled
[   128.703] (**) intel(0): Framebuffer tiled
[   128.703] (**) intel(0): Pixmaps tiled
[   128.703] (**) intel(0): 3D buffers tiled
[   128.703] (**) intel(0): SwapBuffers wait enabled
[   128.704] (==) intel(0): video overlay key set to 0x101fe
[   128.704] (II) intel(0): Output LVDS1 has no monitor section
[   128.704] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   128.717] (II) intel(0): Output VGA1 has no monitor section
[   128.718] (II) intel(0): Output HDMI1 has no monitor section
[   128.760] (II) intel(0): Output DP1 has no monitor section
[   128.760] (II) intel(0): EDID for output LVDS1
[   128.760] (II) intel(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[   128.760] (II) intel(0): Year: 2010  Week: 0
[   128.760] (II) intel(0): EDID Version: 1.4
[   128.760] (II) intel(0): Digital Display Input
[   128.760] (II) intel(0): 6 bits per channel
[   128.760] (II) intel(0): Digital interface is undefined
[   128.760] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   128.760] (II) intel(0): Gamma: 2.20
[   128.760] (II) intel(0): No DPMS capabilities specified
[   128.760] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   128.760] (II) intel(0): First detailed timing is preferred mode
[   128.760] (II) intel(0): Preferred mode is native pixel format and refresh rate
[   128.760] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[   128.760] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[   128.760] (II) intel(0): Manufacturer's mask: 0
[   128.760] (II) intel(0): Supported detailed timing:
[   128.760] (II) intel(0): clock: 76.7 MHz   Image Size:  344 x 194 mm
[   128.760] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1618 h_border: 0
[   128.760] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[   128.760] (II) intel(0): Supported detailed timing:
[   128.761] (II) intel(0): clock: 48.2 MHz   Image Size:  344 x 194 mm
[   128.761] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[   128.761] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[   128.761] (II) intel(0):  4Y4GM\80156AT
[   128.761] (II) intel(0): Unknown vendor-specific block 0
[   128.761] (II) intel(0): EDID (in hex):
[   128.761] (II) intel(0): 	00ffffffffffff004ca3415400000000
[   128.761] (II) intel(0): 	00140104902213780ac8959e57549226
[   128.761] (II) intel(0): 	0f505400000001010101010101010101
[   128.761] (II) intel(0): 	010101010101f51d56fc500016303020
[   128.761] (II) intel(0): 	250058c21000001ad61256a050001630
[   128.761] (II) intel(0): 	3020250058c21000001a000000fe0034
[   128.761] (II) intel(0): 	5934474d8031353641540a2000000000
[   128.761] (II) intel(0): 	00004101960000000001010a202000cf
[   128.761] (II) intel(0): EDID vendor "SEC", prod id 21569
[   128.761] (II) intel(0): Printing DDC gathered Modelines:
[   128.761] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   128.761] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   128.761] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   128.761] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   128.761] (II) intel(0): Printing probed modes for output LVDS1
[   128.761] (II) intel(0): Modeline "1366x768"x60.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   128.761] (II) intel(0): Modeline "1366x768"x40.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   128.761] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   128.761] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   128.761] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   128.762] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   128.773] (II) intel(0): EDID for output VGA1
[   128.774] (II) intel(0): EDID for output HDMI1
[   128.816] (II) intel(0): EDID for output DP1
[   128.816] (II) intel(0): Output LVDS1 connected
[   128.816] (II) intel(0): Output VGA1 disconnected
[   128.816] (II) intel(0): Output HDMI1 disconnected
[   128.817] (II) intel(0): Output DP1 disconnected
[   128.817] (II) intel(0): Using exact sizes for initial modes
[   128.817] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   128.817] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   128.817] (II) intel(0): Kernel page flipping support detected, enabling
[   128.817] (**) intel(0): Display dimensions: (340, 190) mm
[   128.817] (**) intel(0): DPI set to (102, 102)
[   128.817] (II) Loading sub module "fb"
[   128.817] (II) LoadModule: "fb"
[   128.817] (II) Loading /usr/lib/xorg/modules/libfb.so
[   128.825] (II) Module fb: vendor="X.Org Foundation"
[   128.825] 	compiled for 1.13.0, module version = 1.0.0
[   128.825] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   128.825] (II) Loading sub module "dri2"
[   128.825] (II) LoadModule: "dri2"
[   128.825] (II) Module "dri2" already built-in
[   128.826] (II) UnloadModule: "vesa"
[   128.826] (II) Unloading vesa
[   128.826] (==) Depth 24 pixmap format is 32 bpp
[   128.827] (II) intel(0): [DRI2] Setup complete
[   128.827] (II) intel(0): [DRI2]   DRI driver: i965
[   128.827] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   128.831] (II) UXA(0): Driver registered support for the following operations:
[   128.831] (II)         solid
[   128.831] (II)         copy
[   128.831] (II)         composite (RENDER acceleration)
[   128.831] (II)         put_image
[   128.831] (II)         get_image
[   128.831] (==) intel(0): Backing store disabled
[   128.831] (==) intel(0): Silken mouse enabled
[   128.831] (II) intel(0): Initializing HW Cursor
[   128.832] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   128.833] (==) intel(0): DPMS enabled
[   128.833] (==) intel(0): Intel XvMC decoder enabled
[   128.833] (II) intel(0): Set up textured video
[   128.833] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   128.833] (II) intel(0): direct rendering: DRI2 Enabled
[   128.833] (==) intel(0): hotplug detection: "enabled"
[   128.853] (--) RandR disabled
[   129.061] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   129.061] (II) AIGLX: enabled GLX_INTEL_swap_event
[   129.061] (II) AIGLX: enabled GLX_ARB_create_context
[   129.061] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   129.061] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   129.061] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   129.061] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   129.061] (II) AIGLX: Loaded and initialized i965
[   129.061] (II) GLX: Initialized DRI2 GL provider for screen 0
[   129.062] (II) intel(0): Setting screen physical size to 361 x 203
[   129.377] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[   129.377] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   129.377] (II) LoadModule: "evdev"
[   129.377] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   129.390] (II) Module evdev: vendor="X.Org Foundation"
[   129.390] 	compiled for 1.13.0, module version = 2.7.3
[   129.390] 	Module class: X.Org XInput Driver
[   129.390] 	ABI class: X.Org XInput driver, version 18.0
[   129.390] (II) Using input driver 'evdev' for 'Power Button'
[   129.390] (**) Power Button: always reports core events
[   129.390] (**) evdev: Power Button: Device: "/dev/input/event6"
[   129.390] (--) evdev: Power Button: Vendor 0 Product 0x1
[   129.390] (--) evdev: Power Button: Found keys
[   129.390] (II) evdev: Power Button: Configuring as keyboard
[   129.390] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[   129.390] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   129.390] (**) Option "xkb_rules" "evdev"
[   129.390] (**) Option "xkb_model" "evdev"
[   129.390] (**) Option "xkb_layout" "us"
[   129.419] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[   129.419] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   129.419] (II) Using input driver 'evdev' for 'Video Bus'
[   129.419] (**) Video Bus: always reports core events
[   129.419] (**) evdev: Video Bus: Device: "/dev/input/event16"
[   129.419] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   129.419] (--) evdev: Video Bus: Found keys
[   129.419] (II) evdev: Video Bus: Configuring as keyboard
[   129.419] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16/event16"
[   129.420] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   129.420] (**) Option "xkb_rules" "evdev"
[   129.420] (**) Option "xkb_model" "evdev"
[   129.420] (**) Option "xkb_layout" "us"
[   129.421] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   129.421] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   129.421] (II) Using input driver 'evdev' for 'Power Button'
[   129.421] (**) Power Button: always reports core events
[   129.421] (**) evdev: Power Button: Device: "/dev/input/event4"
[   129.421] (--) evdev: Power Button: Vendor 0 Product 0x1
[   129.421] (--) evdev: Power Button: Found keys
[   129.421] (II) evdev: Power Button: Configuring as keyboard
[   129.421] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[   129.421] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   129.421] (**) Option "xkb_rules" "evdev"
[   129.421] (**) Option "xkb_model" "evdev"
[   129.421] (**) Option "xkb_layout" "us"
[   129.422] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   129.422] (II) No input driver specified, ignoring this device.
[   129.422] (II) This device may have been added with another device file.
[   129.423] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[   129.423] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   129.423] (II) Using input driver 'evdev' for 'Sleep Button'
[   129.423] (**) Sleep Button: always reports core events
[   129.423] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[   129.423] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   129.423] (--) evdev: Sleep Button: Found keys
[   129.423] (II) evdev: Sleep Button: Configuring as keyboard
[   129.423] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[   129.423] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   129.423] (**) Option "xkb_rules" "evdev"
[   129.423] (**) Option "xkb_model" "evdev"
[   129.423] (**) Option "xkb_layout" "us"
[   129.424] (II) config/udev: Adding drm device (/dev/dri/card0)
[   129.425] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[   129.425] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[   129.425] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   129.425] (**) Logitech USB Receiver: always reports core events
[   129.425] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[   129.425] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   129.425] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[   129.425] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   129.425] (--) evdev: Logitech USB Receiver: Found relative axes
[   129.425] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[   129.425] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   129.425] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   129.425] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   129.425] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   129.425] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[   129.425] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[   129.425] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   129.426] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   129.426] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   129.426] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   129.426] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   129.426] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[   129.426] (II) No input driver specified, ignoring this device.
[   129.426] (II) This device may have been added with another device file.
[   129.427] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[   129.427] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[   129.427] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[   129.427] (**) Logitech USB Receiver: always reports core events
[   129.427] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[   129.427] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[   129.427] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[   129.427] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[   129.427] (--) evdev: Logitech USB Receiver: Found relative axes
[   129.427] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[   129.427] (--) evdev: Logitech USB Receiver: Found absolute axes
[   129.427] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[   129.427] (--) evdev: Logitech USB Receiver: Found keys
[   129.427] (II) evdev: Logitech USB Receiver: Configuring as mouse
[   129.427] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[   129.427] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[   129.427] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[   129.427] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   129.427] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[   129.427] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[   129.427] (**) Option "xkb_rules" "evdev"
[   129.427] (**) Option "xkb_model" "evdev"
[   129.427] (**) Option "xkb_layout" "us"
[   129.427] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[   129.427] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[   129.427] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[   129.427] (**) Logitech USB Receiver: (accel) acceleration profile 0
[   129.427] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[   129.427] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[   129.427] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event9)
[   129.427] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[   129.427] (II) Using input driver 'evdev' for 'Integrated Webcam'
[   129.427] (**) Integrated Webcam: always reports core events
[   129.427] (**) evdev: Integrated Webcam: Device: "/dev/input/event9"
[   129.428] (--) evdev: Integrated Webcam: Vendor 0xbda Product 0x58c0
[   129.428] (--) evdev: Integrated Webcam: Found keys
[   129.428] (II) evdev: Integrated Webcam: Configuring as keyboard
[   129.428] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9/event9"
[   129.428] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 12)
[   129.428] (**) Option "xkb_rules" "evdev"
[   129.428] (**) Option "xkb_model" "evdev"
[   129.428] (**) Option "xkb_layout" "us"
[   129.428] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[   129.428] (II) No input driver specified, ignoring this device.
[   129.428] (II) This device may have been added with another device file.
[   129.428] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[   129.428] (II) No input driver specified, ignoring this device.
[   129.428] (II) This device may have been added with another device file.
[   129.428] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[   129.428] (II) No input driver specified, ignoring this device.
[   129.428] (II) This device may have been added with another device file.
[   129.429] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[   129.429] (II) No input driver specified, ignoring this device.
[   129.429] (II) This device may have been added with another device file.
[   129.429] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   129.429] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   129.429] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   129.429] (**) AT Translated Set 2 keyboard: always reports core events
[   129.429] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   129.429] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   129.429] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   129.429] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   129.429] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   129.429] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[   129.429] (**) Option "xkb_rules" "evdev"
[   129.429] (**) Option "xkb_model" "evdev"
[   129.429] (**) Option "xkb_layout" "us"
[   129.429] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event10)
[   129.429] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[   129.429] (II) Using input driver 'evdev' for 'DualPoint Stick'
[   129.429] (**) DualPoint Stick: always reports core events
[   129.429] (**) evdev: DualPoint Stick: Device: "/dev/input/event10"
[   129.429] (--) evdev: DualPoint Stick: Vendor 0x2 Product 0x8
[   129.429] (--) evdev: DualPoint Stick: Found 3 mouse buttons
[   129.429] (--) evdev: DualPoint Stick: Found relative axes
[   129.429] (--) evdev: DualPoint Stick: Found x and y relative axes
[   129.429] (II) evdev: DualPoint Stick: Configuring as mouse
[   129.429] (**) evdev: DualPoint Stick: YAxisMapping: buttons 4 and 5
[   129.429] (**) evdev: DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   129.429] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[   129.429] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 14)
[   129.429] (II) evdev: DualPoint Stick: initialized for relative axes.
[   129.430] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[   129.430] (**) DualPoint Stick: (accel) acceleration profile 0
[   129.430] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[   129.430] (**) DualPoint Stick: (accel) acceleration threshold: 4
[   129.430] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse1)
[   129.430] (II) No input driver specified, ignoring this device.
[   129.430] (II) This device may have been added with another device file.
[   129.430] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event11)
[   129.430] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[   129.430] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[   129.430] (II) LoadModule: "synaptics"
[   129.430] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   129.445] (II) Module synaptics: vendor="X.Org Foundation"
[   129.445] 	compiled for 1.13.0, module version = 1.6.2
[   129.445] 	Module class: X.Org XInput Driver
[   129.445] 	ABI class: X.Org XInput driver, version 18.0
[   129.445] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[   129.445] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[   129.445] (**) Option "Device" "/dev/input/event11"
[   129.445] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: ignoring touch events for semi-multitouch device
[   129.445] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 2000
[   129.445] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 1400
[   129.445] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[   129.445] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[   129.445] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle double triple
[   129.445] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[   129.445] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range.  defaulting to 0 - 15
[   129.445] (**) Option "TapButton1" "1"
[   129.445] (**) Option "TapButton2" "2"
[   129.445] (**) Option "TapButton3" "3"
[   129.445] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[   129.446] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[   129.446] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[   129.446] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 15)
[   129.446] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   129.446] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: MaxSpeed is now 1.75
[   129.446] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: AccelFactor is now 0.082
[   129.446] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[   129.446] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[   129.446] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[   129.446] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[   129.446] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[   129.446] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse2)
[   129.446] (II) No input driver specified, ignoring this device.
[   129.446] (II) This device may have been added with another device file.
[   129.447] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   129.447] (II) No input driver specified, ignoring this device.
[   129.447] (II) This device may have been added with another device file.
[   129.447] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[   129.447] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[   129.447] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[   129.447] (**) Dell WMI hotkeys: always reports core events
[   129.447] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[   129.447] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[   129.447] (--) evdev: Dell WMI hotkeys: Found keys
[   129.447] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[   129.447] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[   129.447] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[   129.447] (**) Option "xkb_rules" "evdev"
[   129.447] (**) Option "xkb_model" "evdev"
[   129.447] (**) Option "xkb_layout" "us"
[   135.529] (II) intel(0): EDID vendor "SEC", prod id 21569
[   135.529] (II) intel(0): Printing DDC gathered Modelines:
[   135.529] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   135.529] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   139.136] (II) intel(0): EDID vendor "SEC", prod id 21569
[   139.136] (II) intel(0): Printing DDC gathered Modelines:
[   139.136] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   139.136] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   145.239] (II) intel(0): EDID vendor "SEC", prod id 21569
[   145.239] (II) intel(0): Printing DDC gathered Modelines:
[   145.239] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   145.239] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   161.637] (II) intel(0): EDID vendor "SEC", prod id 21569
[   161.638] (II) intel(0): Printing DDC gathered Modelines:
[   161.638] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   161.638] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   164.487] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   167.555] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   202.299] (II) intel(0): EDID vendor "SEC", prod id 21569
[   202.299] (II) intel(0): Printing DDC gathered Modelines:
[   202.300] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   202.300] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   202.475] (II) intel(0): EDID vendor "SEC", prod id 21569
[   202.475] (II) intel(0): Printing DDC gathered Modelines:
[   202.475] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   202.475] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   202.540] (II) intel(0): EDID vendor "SEC", prod id 21569
[   202.540] (II) intel(0): Printing DDC gathered Modelines:
[   202.540] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   202.540] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[   208.280] (II) intel(0): EDID vendor "SEC", prod id 21569
[   208.280] (II) intel(0): Printing DDC gathered Modelines:
[   208.280] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[   208.280] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[  2510.822] (II) intel(0): EDID vendor "SEC", prod id 21569
[  2510.823] (II) intel(0): Printing DDC gathered Modelines:
[  2510.823] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[  2510.823] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[  9699.998] (II) intel(0): EDID vendor "SEC", prod id 21569
[  9699.998] (II) intel(0): Printing DDC gathered Modelines:
[  9699.998] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[  9699.998] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[  9721.312] (II) intel(0): EDID vendor "SEC", prod id 21569
[  9721.312] (II) intel(0): Printing DDC gathered Modelines:
[  9721.312] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[  9721.312] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 10391.555] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 10391.555] (II) intel(0): Printing DDC gathered Modelines:
[ 10391.555] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 10391.555] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 10656.945] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 10656.945] (II) intel(0): Printing DDC gathered Modelines:
[ 10656.945] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 10656.945] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 11042.738] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 11042.738] (II) intel(0): Printing DDC gathered Modelines:
[ 11042.738] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 11042.738] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 11296.341] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 11296.341] (II) intel(0): Printing DDC gathered Modelines:
[ 11296.341] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 11296.341] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 11597.109] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 11597.109] (II) intel(0): Printing DDC gathered Modelines:
[ 11597.109] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 11597.109] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 11739.458] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 11739.458] (II) intel(0): Printing DDC gathered Modelines:
[ 11739.458] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 11739.458] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 12013.144] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 12013.144] (II) intel(0): Printing DDC gathered Modelines:
[ 12013.144] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 12013.144] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 12016.601] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 12016.601] (II) intel(0): Printing DDC gathered Modelines:
[ 12016.601] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 12016.601] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 12438.132] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 12438.132] (II) intel(0): Printing DDC gathered Modelines:
[ 12438.132] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 12438.132] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 12979.634] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 12979.634] (II) intel(0): Printing DDC gathered Modelines:
[ 12979.634] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 12979.634] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 13054.463] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 13054.463] (II) intel(0): Printing DDC gathered Modelines:
[ 13054.463] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 13054.463] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 14784.500] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 14784.500] (II) intel(0): Printing DDC gathered Modelines:
[ 14784.500] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 14784.500] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 14815.047] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 14815.047] (II) intel(0): Printing DDC gathered Modelines:
[ 14815.047] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 14815.047] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 16775.051] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 16775.051] (II) intel(0): Printing DDC gathered Modelines:
[ 16775.051] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 16775.051] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 16796.459] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 16796.459] (II) intel(0): Printing DDC gathered Modelines:
[ 16796.459] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 16796.459] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)
[ 18054.803] (II) intel(0): EDID vendor "SEC", prod id 21569
[ 18054.803] (II) intel(0): Printing DDC gathered Modelines:
[ 18054.803] (II) intel(0): Modeline "1366x768"x0.0   76.69  1366 1414 1446 1618  768 770 775 790 +hsync -vsync (47.4 kHz eP)
[ 18054.803] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 770 775 790 +hsync -vsync (31.6 kHz e)

Last edited by Thisguy_ (2012-12-08 20:14:16)

Offline

#7 2012-12-08 21:57:59

Thisguy_
Member
Registered: 2012-12-03
Posts: 37

Re: [Solved]Gnome - Bottom of screen untouchable until resolution adjusted

I found out that it's a problem with one of my extensions, and I've got a guess as to which one, be right back with that!

EDIT: It was the outdated extension found at https://extensions.gnome.org/extension/ … -settings/

Thanks for the help with guidelines, guys!

Last edited by Thisguy_ (2012-12-08 21:59:05)

Offline

Board footer

Powered by FluxBB