You are not logged in.

#1 2012-11-13 20:16:50

lasombra
Member
From: Luzern
Registered: 2011-09-01
Posts: 43

[Systemd] Very long boot time

I have a very long boot time with my Arch.
Startup finished in 828766ms (kernel) + 63430ms (userspace) = 892196ms

Especially after login into gnome, it takes quite a while until the desktop is visible. In meanwhile, I only see the wallpaper.  Does anyone has a suggestion how to fix that?

Linux hostname 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64 GNU/Linux

systemd-analzye blame shows

 18722ms colord.service
 16584ms home.mount
 12666ms plymouth-start.service
 11550ms boot.mount
 11350ms var.mount
  7604ms NetworkManager.service
  7261ms chrony.service
  1985ms wpa_supplicant.service
  1606ms systemd-modules-load.service
  1350ms systemd-tmpfiles-setup.service
  1202ms dev-hugepages.mount
  1189ms dev-mqueue.mount
  1080ms sys-kernel-debug.mount
   987ms systemd-udev-trigger.service
   946ms systemd-udevd.service
   879ms systemd-vconsole-setup.service
   495ms bluetooth.service
   376ms polkit.service
   358ms crashplan.service
   348ms systemd-readahead-replay.service
   346ms lm_sensors.service
   337ms upower.service
   331ms systemd-readahead-collect.service
   311ms systemd-logind.service
   289ms lvmetad.service
   286ms systemd-binfmt.service
   242ms cpupower.service
   206ms systemd-remount-fs.service
   174ms gdm.service
   140ms proc-sys-fs-binfmt_misc.mount
    94ms udisks2.service
    93ms rtkit-daemon.service
    87ms rc-local.service
    86ms systemd-user-sessions.service
    53ms systemd-sysctl.service
    24ms accounts-daemon.service
     2ms tmp.mount
     1ms sys-fs-fuse-connections.mount

Dmesg shows:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.6.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c727bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c727c000-0x00000000c7281fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c7282000-0x00000000c73ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c73ec000-0x00000000c740efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c740f000-0x00000000c746efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c746f000-0x00000000c746ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c7470000-0x00000000c74f0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c74f1000-0x00000000c770efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c770f000-0x00000000c7717fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7718000-0x00000000c771efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c771f000-0x00000000c7770fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7771000-0x00000000c779efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c779f000-0x00000000c77e1fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c77e2000-0x00000000c77fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c77ff000-0x00000000c77fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7800000-0x00000000c7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f1004000-0x00000000f1004fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000237ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: Dell Inc. Studio XPS 1645/0Y517R, BIOS A13 04/01/2011
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-D3FFF write-through
[    0.000000]   D4000-D7FFF uncachable
[    0.000000]   D8000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0C0000000 mask FF8000000 write-back
[    0.000000]   4 base 100000000 mask F00000000 write-back
[    0.000000]   5 base 200000000 mask FE0000000 write-back
[    0.000000]   6 base 220000000 mask FF0000000 write-back
[    0.000000]   7 base 230000000 mask FF8000000 write-back
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xc7800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f7360-0x000f736f] mapped at [ffff8800000f7360]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xc77fffff]
[    0.000000]  [mem 0x00000000-0xc77fffff] page 2M
[    0.000000] kernel direct mapping tables up to 0xc77fffff @ [mem 0x1fffb000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x237ffffff]
[    0.000000]  [mem 0x100000000-0x237ffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x237ffffff @ [mem 0xc77dc000-0xc77e1fff]
[    0.000000] RAMDISK: [mem 0x376e0000-0x37b67fff]
[    0.000000] ACPI: RSDP 00000000000f7280 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000c77f4285 00064 (v01 DELL    QA09    06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000c77e4000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000c77e5000 0A839 (v02 Intel  CALPELLA 06040000 INTL 20060912)
[    0.000000] ACPI: FACS 00000000c779bfc0 00040
[    0.000000] ACPI: HPET 00000000c77fecc2 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000c77fecfa 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC 00000000c77fed36 000BC (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000c77fedf2 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000c77fee1a 00176 (v01 DELL    QA09    06040000  LTP 00000000)
[    0.000000] ACPI: OSFR 00000000c77fef90 00070 (v01 DELL   DELL     06040000 ASL  00000061)
[    0.000000] ACPI: SSDT 00000000c77e3000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20060912)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x237ffffff]
[    0.000000]   NODE_DATA [mem 0x237ffc000-0x237ffffff]
[    0.000000]  [ffffea0000000000-ffffea0008dfffff] PMD -> [ffff88022f600000-ffff8802375fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x237ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009bfff]
[    0.000000]   node   0: [mem 0x00100000-0xc727bfff]
[    0.000000]   node   0: [mem 0xc7282000-0xc73ebfff]
[    0.000000]   node   0: [mem 0xc740f000-0xc746efff]
[    0.000000]   node   0: [mem 0xc770f000-0xc7717fff]
[    0.000000]   node   0: [mem 0xc771f000-0xc7770fff]
[    0.000000]   node   0: [mem 0xc779f000-0xc77e1fff]
[    0.000000]   node   0: [mem 0xc77ff000-0xc77fffff]
[    0.000000]   node   0: [mem 0x100000000-0x237ffffff]
[    0.000000] On node 0 totalpages: 2094193
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3910 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 795941 pages, LIFO batch:31
[    0.000000]   Normal zone: 19968 pages used for memmap
[    0.000000]   Normal zone: 1257984 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000c727c000 - 00000000c7282000
[    0.000000] PM: Registered nosave memory: 00000000c73ec000 - 00000000c740f000
[    0.000000] PM: Registered nosave memory: 00000000c746f000 - 00000000c7470000
[    0.000000] PM: Registered nosave memory: 00000000c7470000 - 00000000c74f1000
[    0.000000] PM: Registered nosave memory: 00000000c74f1000 - 00000000c770f000
[    0.000000] PM: Registered nosave memory: 00000000c7718000 - 00000000c771f000
[    0.000000] PM: Registered nosave memory: 00000000c7771000 - 00000000c779f000
[    0.000000] PM: Registered nosave memory: 00000000c77e2000 - 00000000c77ff000
[    0.000000] PM: Registered nosave memory: 00000000c7800000 - 00000000c8000000
[    0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f1004000
[    0.000000] PM: Registered nosave memory: 00000000f1004000 - 00000000f1005000
[    0.000000] PM: Registered nosave memory: 00000000f1005000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] e820: [mem 0xc8000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880237c00000 s84608 r8192 d21888 u262144
[    0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2057835
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/cryptpool-cryptroot ro quiet splash cryptdevice=/dev/sda2:cryptvol init=/usr/lib/systemd/systemd radeon.modeset=1 pcie_aspm=force
[    0.000000] PCIe ASPM is forcibly enabled
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8162844k/9306112k available (4727k kernel code, 929340k absent, 213928k reserved, 4143k data, 768k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 1596.068 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.14 BogoMIPS (lpj=5320226)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000044] Security Framework initialized
[    0.000048] AppArmor: AppArmor disabled by boot time parameter
[    0.000771] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.003000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003923] Mount-cache hash table entries: 256
[    0.004173] Initializing cgroup subsys cpuacct
[    0.004176] Initializing cgroup subsys memory
[    0.004184] Initializing cgroup subsys devices
[    0.004186] Initializing cgroup subsys freezer
[    0.004188] Initializing cgroup subsys net_cls
[    0.004189] Initializing cgroup subsys blkio
[    0.004216] CPU: Physical Processor ID: 0
[    0.004217] CPU: Processor Core ID: 0
[    0.004222] mce: CPU supports 9 MCE banks
[    0.004234] CPU0: Thermal monitoring enabled (TM1)
[    0.004241] process: using mwait in idle threads
[    0.004246] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x6
[    0.005569] ACPI: Core revision 20120711
[    0.021739] ftrace: allocating 18347 entries in 72 pages
[    0.034527] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.067503] smpboot: CPU0: Intel(R) Core(TM) i7 CPU       Q 720  @ 1.60GHz stepping 05
[    0.172651] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.172658] perf_event_intel: CPU erratum AAJ80 worked around
[    0.172659] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.172661] ... version:                3
[    0.172662] ... bit width:              48
[    0.172663] ... generic registers:      4
[    0.172665] ... value mask:             0000ffffffffffff
[    0.172666] ... max period:             000000007fffffff
[    0.172667] ... fixed-purpose events:   3
[    0.172669] ... event mask:             000000070000000f
[    0.199435] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.212646] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 OK
[    0.379170] Brought up 8 CPUs
[    0.379175] smpboot: Total of 8 processors activated (25547.13 BogoMIPS)
[    0.385494] devtmpfs: initialized
[    0.387562] PM: Registering ACPI NVS region [mem 0xc7470000-0xc74f0fff] (528384 bytes)
[    0.387574] PM: Registering ACPI NVS region [mem 0xc7771000-0xc779efff] (188416 bytes)
[    0.388860] NET: Registered protocol family 16
[    0.389041] ACPI: bus type pci registered
[    0.389136] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.389139] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.432597] PCI: Using configuration type 1 for base access
[    0.433425] bio: create slab <bio-0> at 0
[    0.433488] ACPI: Added _OSI(Module Device)
[    0.433490] ACPI: Added _OSI(Processor Device)
[    0.433491] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.433493] ACPI: Added _OSI(Processor Aggregator Device)
[    0.435530] ACPI: EC: Look up EC in DSDT
[    0.437476] ACPI: Executed 1 blocks of module-level executable AML code
[    0.442713] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.443644] ACPI: SSDT 00000000c771aa98 002E8 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.444142] ACPI: Dynamic OEM Table Load:
[    0.444145] ACPI: SSDT           (null) 002E8 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
[    0.444332] ACPI: SSDT 00000000c7719018 008B0 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.444806] ACPI: Dynamic OEM Table Load:
[    0.444809] ACPI: SSDT           (null) 008B0 (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
[    0.445201] ACPI: SSDT 00000000c771a718 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.445749] ACPI: Dynamic OEM Table Load:
[    0.445753] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20060912)
[    0.445922] ACPI: SSDT 00000000c7718d98 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.446432] ACPI: Dynamic OEM Table Load:
[    0.446435] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20060912)
[    0.448062] ACPI: Interpreter enabled
[    0.448066] ACPI: (supports S0 S3 S4 S5)
[    0.448089] ACPI: Using IOAPIC for interrupt routing
[    0.448593] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.455392] ACPI: Power Resource [FN00] (off)
[    0.455494] ACPI: Power Resource [FN01] (off)
[    0.456110] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.456339] ACPI: No dock devices found.
[    0.456343] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.456813] \_SB_.PCI0:_OSC invalid UUID
[    0.456815] _OSC request data:1 8 1f 
[    0.456820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.457600] PCI host bridge to bus 0000:00
[    0.457604] pci_bus 0000:00: busn_res: [bus 00-fe] is inserted under domain [bus 00-ff]
[    0.457607] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.457610] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.457612] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.457615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.457617] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.457619] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.457622] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.457624] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xdfffffff]
[    0.457627] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.457638] pci 0000:00:00.0: [8086:d132] type 00 class 0x060000
[    0.457700] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[    0.457759] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.457783] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.457850] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.457917] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.457983] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.458043] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.458094] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.458170] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.458194] pci 0000:00:1a.0: reg 10: [mem 0xf1005800-0xf1005bff]
[    0.458289] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.458318] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.458335] pci 0000:00:1b.0: reg 10: [mem 0xf1000000-0xf1003fff 64bit]
[    0.458409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.458432] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.458508] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.458533] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.458609] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.458635] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.458710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.458735] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.458810] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.458835] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.458911] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.458943] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.458965] pci 0000:00:1d.0: reg 10: [mem 0xf1005c00-0xf1005fff]
[    0.459066] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.459092] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.459161] pci 0000:00:1f.0: [8086:3b03] type 00 class 0x060100
[    0.459292] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.459313] pci 0000:00:1f.2: reg 10: [io  0x1830-0x1837]
[    0.459322] pci 0000:00:1f.2: reg 14: [io  0x1824-0x1827]
[    0.459331] pci 0000:00:1f.2: reg 18: [io  0x1828-0x182f]
[    0.459340] pci 0000:00:1f.2: reg 1c: [io  0x1820-0x1823]
[    0.459350] pci 0000:00:1f.2: reg 20: [io  0x1800-0x181f]
[    0.459359] pci 0000:00:1f.2: reg 24: [mem 0xf1005000-0xf10057ff]
[    0.459410] pci 0000:00:1f.2: PME# supported from D3hot
[    0.459430] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.459446] pci 0000:00:1f.3: reg 10: [mem 0xf1006000-0xf10060ff 64bit]
[    0.459469] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    0.459533] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-fe]
[    0.459547] pci 0000:02:00.0: [1002:9488] type 00 class 0x030000
[    0.459559] pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[    0.459568] pci 0000:02:00.0: reg 14: [io  0x2000-0x20ff]
[    0.459577] pci 0000:02:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[    0.459605] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.459642] pci 0000:02:00.0: supports D1 D2
[    0.459664] pci 0000:02:00.1: [1002:aa38] type 00 class 0x040300
[    0.459676] pci 0000:02:00.1: reg 10: [mem 0xcfeec000-0xcfeeffff]
[    0.459749] pci 0000:02:00.1: supports D1 D2
[    0.469037] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.469045] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.469052] pci 0000:00:03.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.469061] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.469117] pci_bus 0000:03: busn_res: [bus 03-04] is inserted under [bus 00-fe]
[    0.469121] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    0.469126] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.469130] pci 0000:00:1c.0:   bridge window [mem 0xf0800000-0xf08fffff]
[    0.469137] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.469179] pci_bus 0000:05: busn_res: [bus 05-06] is inserted under [bus 00-fe]
[    0.469247] pci 0000:05:00.0: [8086:4235] type 00 class 0x028000
[    0.469385] pci 0000:05:00.0: reg 10: [mem 0xf0900000-0xf0901fff 64bit]
[    0.470080] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.470313] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    0.470317] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.470322] pci 0000:00:1c.1:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.470329] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.470371] pci_bus 0000:07: busn_res: [bus 07-08] is inserted under [bus 00-fe]
[    0.470375] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[    0.470380] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.470384] pci 0000:00:1c.3:   bridge window [mem 0xf0a00000-0xf0afffff]
[    0.470391] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.470433] pci_bus 0000:09: busn_res: [bus 09-0a] is inserted under [bus 00-fe]
[    0.470458] pci 0000:09:00.0: [1180:e822] type 00 class 0x080500
[    0.470478] pci 0000:09:00.0: reg 10: [mem 0xf0b00000-0xf0b000ff]
[    0.470612] pci 0000:09:00.0: supports D1 D2
[    0.470614] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.470664] pci 0000:09:00.1: [1180:e230] type 00 class 0x088000
[    0.470683] pci 0000:09:00.1: reg 10: [mem 0xf0c00800-0xf0c008ff]
[    0.470817] pci 0000:09:00.1: supports D1 D2
[    0.470819] pci 0000:09:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.470862] pci 0000:09:00.2: [1180:e852] type 00 class 0x088000
[    0.470882] pci 0000:09:00.2: reg 10: [mem 0xf0c00c00-0xf0c00cff]
[    0.471016] pci 0000:09:00.2: supports D1 D2
[    0.471018] pci 0000:09:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.471061] pci 0000:09:00.3: [1180:e832] type 00 class 0x0c0010
[    0.471080] pci 0000:09:00.3: reg 10: [mem 0xf0c00000-0xf0c007ff]
[    0.471214] pci 0000:09:00.3: supports D1 D2
[    0.471216] pci 0000:09:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.479052] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
[    0.479060] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.479067] pci 0000:00:1c.4:   bridge window [mem 0xf0b00000-0xf0cfffff]
[    0.479077] pci 0000:00:1c.4:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.479131] pci_bus 0000:0b: busn_res: [bus 0b] is inserted under [bus 00-fe]
[    0.479319] pci 0000:0b:00.0: [14e4:1698] type 00 class 0x020000
[    0.479351] pci 0000:0b:00.0: reg 10: [mem 0xf0d00000-0xf0d0ffff 64bit]
[    0.479523] pci 0000:0b:00.0: PME# supported from D3hot D3cold
[    0.479582] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[    0.479589] pci 0000:00:1c.5:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    0.479616] pci_bus 0000:0c: busn_res: [bus 0c] is inserted under [bus 00-fe]
[    0.479664] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
[    0.479675] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.479677] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.479680] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.479682] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.479685] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.479687] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.479690] pci 0000:00:1e.0:   bridge window [mem 0xc8000000-0xdfffffff] (subtractive decode)
[    0.479692] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.479724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.479928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[    0.479968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.480099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.480160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.480223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.480283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.480343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.480435] \_SB_.PCI0:_OSC invalid UUID
[    0.480437] _OSC request data:1 1f 1f 
[    0.480441]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.480443]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.487467] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.487507] PCI host bridge to bus 0000:ff
[    0.487511] pci_bus 0000:ff: busn_res: [bus ff] is inserted under domain [bus 00-ff]
[    0.487513] pci_bus 0000:ff: root bus resource [bus ff]
[    0.487521] pci 0000:ff:00.0: [8086:2c52] type 00 class 0x060000
[    0.487545] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000
[    0.487572] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000
[    0.487594] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000
[    0.487622] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000
[    0.487644] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000
[    0.487667] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000
[    0.487691] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000
[    0.487714] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000
[    0.487736] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000
[    0.487758] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000
[    0.487783] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000
[    0.487807] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000
[    0.487829] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000
[    0.487852] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000
[    0.487895]  pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.487897]  pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.488488] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.488544] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.488601] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.488655] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.488711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.488765] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.488819] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.488871] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.488974] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.488983] vgaarb: loaded
[    0.488985] vgaarb: bridge control possible 0000:02:00.0
[    0.489035] PCI: Using ACPI for IRQ routing
[    0.495825] PCI: pci_cache_line_size set to 64 bytes
[    0.496142] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.496144] e820: reserve RAM buffer [mem 0xc727c000-0xc7ffffff]
[    0.496149] e820: reserve RAM buffer [mem 0xc73ec000-0xc7ffffff]
[    0.496152] e820: reserve RAM buffer [mem 0xc746f000-0xc7ffffff]
[    0.496156] e820: reserve RAM buffer [mem 0xc7718000-0xc7ffffff]
[    0.496159] e820: reserve RAM buffer [mem 0xc7771000-0xc7ffffff]
[    0.496161] e820: reserve RAM buffer [mem 0xc77e2000-0xc7ffffff]
[    0.496163] e820: reserve RAM buffer [mem 0xc7800000-0xc7ffffff]
[    0.496267] NetLabel: Initializing
[    0.496269] NetLabel:  domain hash size = 128
[    0.496270] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.496283] NetLabel:  unlabeled traffic allowed by default
[    0.496337] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.496344] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[    0.496351] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.499146] hpet: hpet2 irq 40 for MSI
[    0.502434] hpet: hpet3 irq 41 for MSI
[    0.505694] hpet: hpet4 irq 42 for MSI
[    0.505793] hpet: hpet5 irq 43 for MSI
[    0.509214] hpet: hpet6 irq 44 for MSI
[    0.522618] Switching to clocksource hpet
[    0.529334] pnp: PnP ACPI init
[    0.529354] ACPI: bus type pnp registered
[    0.529782] pnp 00:00: [bus 00-fe]
[    0.529786] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.529789] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.529791] pnp 00:00: [io  0x0d00-0xffff window]
[    0.529794] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.529796] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.529799] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.529801] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.529803] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.529806] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.529808] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.529811] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.529813] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.529815] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.529820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.529822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.529825] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.529827] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.529829] pnp 00:00: [mem 0xc8000000-0xdfffffff window]
[    0.529832] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.529834] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.529903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.529952] pnp 00:01: [io  0x0000-0x001f]
[    0.529954] pnp 00:01: [io  0x0081-0x0091]
[    0.529957] pnp 00:01: [io  0x0093-0x009f]
[    0.529959] pnp 00:01: [io  0x00c0-0x00df]
[    0.529961] pnp 00:01: [dma 4]
[    0.529991] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.530001] pnp 00:02: [mem 0xff000000-0xffffffff]
[    0.530030] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.530116] pnp 00:03: [irq 0 disabled]
[    0.530125] pnp 00:03: [irq 8]
[    0.530128] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    0.530162] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.530174] pnp 00:04: [io  0x00f0]
[    0.530181] pnp 00:04: [irq 13]
[    0.530207] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.530221] pnp 00:05: [io  0x002e-0x002f]
[    0.530223] pnp 00:05: [io  0x004e-0x004f]
[    0.530225] pnp 00:05: [io  0x0061]
[    0.530227] pnp 00:05: [io  0x0063]
[    0.530229] pnp 00:05: [io  0x0065]
[    0.530231] pnp 00:05: [io  0x0067]
[    0.530234] pnp 00:05: [io  0x0068]
[    0.530236] pnp 00:05: [io  0x006c]
[    0.530238] pnp 00:05: [io  0x0070]
[    0.530240] pnp 00:05: [io  0x0080]
[    0.530242] pnp 00:05: [io  0x0092]
[    0.530244] pnp 00:05: [io  0x00b2-0x00b3]
[    0.530246] pnp 00:05: [io  0x0680-0x069f]
[    0.530249] pnp 00:05: [io  0x0500-0x050f]
[    0.530251] pnp 00:05: [io  0xffff]
[    0.530253] pnp 00:05: [io  0xffff]
[    0.530255] pnp 00:05: [io  0x0400-0x047f]
[    0.530257] pnp 00:05: [io  0x1180-0x11ff]
[    0.530259] pnp 00:05: [io  0x164e-0x164f]
[    0.530262] pnp 00:05: [io  0xfe00]
[    0.530330] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.530333] system 00:05: [io  0x0500-0x050f] has been reserved
[    0.530336] system 00:05: [io  0xffff] has been reserved
[    0.530339] system 00:05: [io  0xffff] has been reserved
[    0.530342] system 00:05: [io  0x0400-0x047f] has been reserved
[    0.530345] system 00:05: [io  0x1180-0x11ff] has been reserved
[    0.530347] system 00:05: [io  0x164e-0x164f] has been reserved
[    0.530352] system 00:05: [io  0xfe00] has been reserved
[    0.530356] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.530374] pnp 00:06: [io  0x0300-0x0307]
[    0.530381] pnp 00:06: [irq 10]
[    0.530410] pnp 00:06: Plug and Play ACPI device, IDs ITE8708 (active)
[    0.530445] pnp 00:07: [io  0x0070-0x0077]
[    0.530476] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.530488] pnp 00:08: [io  0x0060]
[    0.530492] pnp 00:08: [io  0x0064]
[    0.530499] pnp 00:08: [irq 1]
[    0.530526] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.530539] pnp 00:09: [irq 12]
[    0.530569] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.530934] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[    0.530937] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.530940] pnp 00:0a: [mem 0xfed1b000-0xfed1bfff]
[    0.530942] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.530944] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[    0.530947] pnp 00:0a: [mem 0xf1004000-0xf1004fff]
[    0.530949] pnp 00:0a: [mem 0xc8000000-0xc8000fff]
[    0.530951] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[    0.530954] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[    0.530956] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[    0.530958] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[    0.530960] pnp 00:0a: [mem 0xff000000-0xffffffff]
[    0.530963] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[    0.531049] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.531052] system 00:0a: [mem 0xfed1b000-0xfed1bfff] has been reserved
[    0.531055] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.531058] system 00:0a: [mem 0xf1004000-0xf1004fff] has been reserved
[    0.531061] system 00:0a: [mem 0xc8000000-0xc8000fff] has been reserved
[    0.531064] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.531067] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.531070] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.531072] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[    0.531075] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.531080] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.532133] pnp 00:0b: [bus ff]
[    0.532197] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.532211] pnp: PnP ACPI: found 12 devices
[    0.532212] ACPI: ACPI bus type pnp unregistered
[    0.539150] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.539155] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
[    0.539169] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.539172] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.539178] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc8100000-0xc82fffff 64bit pref]
[    0.539182] pci 0000:00:1c.5: BAR 13: assigned [io  0x7000-0x7fff]
[    0.539186] pci 0000:02:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe1ffff pref]
[    0.539190] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.539193] pci 0000:00:03.0:   bridge window [io  0x2000-0x2fff]
[    0.539198] pci 0000:00:03.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.539202] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.539207] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[    0.539211] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.539217] pci 0000:00:1c.0:   bridge window [mem 0xf0800000-0xf08fffff]
[    0.539221] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.539228] pci 0000:00:1c.1: PCI bridge to [bus 05-06]
[    0.539232] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.539237] pci 0000:00:1c.1:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.539241] pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.539248] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[    0.539252] pci 0000:00:1c.3:   bridge window [io  0x5000-0x5fff]
[    0.539257] pci 0000:00:1c.3:   bridge window [mem 0xf0a00000-0xf0afffff]
[    0.539262] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.539269] pci 0000:00:1c.4: PCI bridge to [bus 09-0a]
[    0.539273] pci 0000:00:1c.4:   bridge window [io  0x6000-0x6fff]
[    0.539278] pci 0000:00:1c.4:   bridge window [mem 0xf0b00000-0xf0cfffff]
[    0.539283] pci 0000:00:1c.4:   bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.539290] pci 0000:00:1c.5: PCI bridge to [bus 0b]
[    0.539293] pci 0000:00:1c.5:   bridge window [io  0x7000-0x7fff]
[    0.539299] pci 0000:00:1c.5:   bridge window [mem 0xf0d00000-0xf0dfffff]
[    0.539304] pci 0000:00:1c.5:   bridge window [mem 0xc8100000-0xc82fffff 64bit pref]
[    0.539310] pci 0000:00:1e.0: PCI bridge to [bus 0c]
[    0.539366] pci 0000:00:1e.0: setting latency timer to 64
[    0.539371] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.539373] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.539376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.539378] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.539381] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.539383] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.539385] pci_bus 0000:00: resource 10 [mem 0xc8000000-0xdfffffff]
[    0.539398] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[    0.539401] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.539403] pci_bus 0000:02: resource 1 [mem 0xcfe00000-0xcfefffff]
[    0.539406] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.539408] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.539411] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
[    0.539413] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.539416] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.539418] pci_bus 0000:05: resource 1 [mem 0xf0900000-0xf09fffff]
[    0.539420] pci_bus 0000:05: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.539423] pci_bus 0000:07: resource 0 [io  0x5000-0x5fff]
[    0.539425] pci_bus 0000:07: resource 1 [mem 0xf0a00000-0xf0afffff]
[    0.539428] pci_bus 0000:07: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.539430] pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
[    0.539433] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0cfffff]
[    0.539435] pci_bus 0000:09: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[    0.539438] pci_bus 0000:0b: resource 0 [io  0x7000-0x7fff]
[    0.539440] pci_bus 0000:0b: resource 1 [mem 0xf0d00000-0xf0dfffff]
[    0.539443] pci_bus 0000:0b: resource 2 [mem 0xc8100000-0xc82fffff 64bit pref]
[    0.539445] pci_bus 0000:0c: resource 4 [io  0x0000-0x0cf7]
[    0.539448] pci_bus 0000:0c: resource 5 [io  0x0d00-0xffff]
[    0.539450] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[    0.539452] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.539455] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.539457] pci_bus 0000:0c: resource 9 [mem 0x000dc000-0x000dffff]
[    0.539460] pci_bus 0000:0c: resource 10 [mem 0xc8000000-0xdfffffff]
[    0.539462] pci_bus 0000:0c: resource 11 [mem 0xf0000000-0xfebfffff]
[    0.539501] NET: Registered protocol family 2
[    0.540223] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.543745] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.544173] TCP: Hash tables configured (established 524288 bind 65536)
[    0.544194] TCP: reno registered
[    0.544208] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.544300] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.544454] NET: Registered protocol family 1
[    0.544593] pci 0000:02:00.0: Boot video device
[    0.544817] PCI: CLS 64 bytes, default 64
[    0.544861] Unpacking initramfs...
[    0.665886] Freeing initrd memory: 4640k freed
[    0.666611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.666615] software IO TLB [mem 0xc327c000-0xc727bfff] (64MB) mapped at [ffff8800c327c000-ffff8800c727bfff]
[    0.666654] Simple Boot Flag at 0x36 set to 0x80
[    0.667182] audit: initializing netlink socket (disabled)
[    0.667193] type=2000 audit(1352749565.703:1): initialized
[    0.683027] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.685360] VFS: Disk quotas dquot_6.5.2
[    0.685417] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.685575] msgmni has been set to 15952
[    0.685799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.685830] io scheduler noop registered
[    0.685832] io scheduler deadline registered
[    0.685897] io scheduler cfq registered (default)
[    0.686337] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.686339] vesafb: scrolling: redraw
[    0.686342] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.687265] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 5120k, total 5120k
[    0.886729] Console: switching to colour frame buffer device 160x64
[    1.086123] fb0: VESA VGA frame buffer device
[    1.086134] intel_idle: MWAIT substates: 0x1120
[    1.086145] intel_idle: v0.4 model 0x1E
[    1.086146] intel_idle: lapic_timer_reliable_states 0x2
[    1.086221] GHES: HEST is not enabled!
[    1.086283] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.086787] Linux agpgart interface v0.103
[    1.086895] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.097204] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.097237] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.097348] mousedev: PS/2 mouse device common for all mice
[    1.097573] rtc_cmos 00:07: RTC can wake from S4
[    1.097893] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.097920] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.098264] cpuidle: using governor ladder
[    1.098473] cpuidle: using governor menu
[    1.098603] drop_monitor: Initializing network drop monitor service
[    1.098697] TCP: cubic registered
[    1.098819] NET: Registered protocol family 10
[    1.099011] NET: Registered protocol family 17
[    1.099028] Key type dns_resolver registered
[    1.099438] PM: Hibernation image not present or could not be loaded.
[    1.099447] registered taskstats version 1
[    1.101811] rtc_cmos 00:07: setting system clock to 2012-11-12 19:46:05 UTC (1352749565)
[    1.103851] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.106355] Freeing unused kernel memory: 768k freed
[    1.106522] Write protecting the kernel read-only data: 8192k
[    1.116385] Freeing unused kernel memory: 1408k freed
[    1.117994] Freeing unused kernel memory: 568k freed
[    1.134497] systemd-udevd[78]: starting version 195
[    1.180869] ACPI: bus type usb registered
[    1.180984] usbcore: registered new interface driver usbfs
[    1.181051] usbcore: registered new interface driver hub
[    1.181311] usbcore: registered new device driver usb
[    1.182950] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.183127] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.183132] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.183234] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.187253] ehci_hcd 0000:00:1a.0: debug port 2
[    1.187271] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.187303] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800
[    1.187791] SCSI subsystem initialized
[    1.189604] ACPI: bus type scsi registered
[    1.189681] libata version 3.00 loaded.
[    1.195488] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.195917] hub 1-0:1.0: USB hub found
[    1.195922] hub 1-0:1.0: 3 ports detected
[    1.196087] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.196092] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.196163] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.200176] ehci_hcd 0000:00:1d.0: debug port 2
[    1.200188] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.200205] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00
[    1.208814] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.209225] hub 2-0:1.0: USB hub found
[    1.209230] hub 2-0:1.0: 3 ports detected
[    1.209367] ahci 0000:00:1f.2: version 3.0
[    1.209430] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[    1.209548] ahci: SSS flag set, parallel bus scan disabled
[    1.209587] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode
[    1.209592] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    1.209597] ahci 0000:00:1f.2: setting latency timer to 64
[    1.223416] scsi0 : ahci
[    1.223797] scsi1 : ahci
[    1.224147] scsi2 : ahci
[    1.224500] scsi3 : ahci
[    1.224856] scsi4 : ahci
[    1.225221] scsi5 : ahci
[    1.225356] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45
[    1.225362] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45
[    1.225365] ata3: DUMMY
[    1.225367] ata4: DUMMY
[    1.225369] ata5: DUMMY
[    1.225373] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45
[    1.501934] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.545247] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.547533] ata1.00: ATA-8: WDC WD6400BEVT-75A0RT0, 01.01A01, max UDMA/133
[    1.547540] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.549967] ata1.00: configured for UDMA/133
[    1.550374] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400BEVT-7 01.0 PQ: 0 ANSI: 5
[    1.626090] hub 1-1:1.0: USB hub found
[    1.626247] hub 1-1:1.0: 6 ports detected
[    1.668452] tsc: Refined TSC clocksource calibration: 1595.999 MHz
[    1.668460] Switching to clocksource tsc
[    1.731725] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.856178] hub 2-1:1.0: USB hub found
[    1.856346] hub 2-1:1.0: 8 ports detected
[    1.868319] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.880979] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100
[    1.880987] ata2.00: applying bridge limits
[    1.894279] ata2.00: configured for UDMA/100
[    1.895297] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5
[    1.924926] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd
[    2.188109] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
[    2.214657] ata6: SATA link down (SStatus 0 SControl 300)
[    2.220297] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.220394] sd 0:0:0:0: [sda] Write Protect is off
[    2.220398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.220436] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.264902]  sda: sda1 sda2
[    2.266126] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.286592] usbcore: registered new interface driver usbhid
[    2.286606] usbhid: USB HID core driver
[    2.287736] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
[    2.288087] hid-generic 0003:046D:C00B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.0-1.1/input0
[    2.344526] usb 2-1.2: new high-speed USB device number 4 using ehci_hcd
[    2.415244] device-mapper: uevent: version 1.0.3
[    2.415448] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
[    2.430414] hub 2-1.2:1.0: USB hub found
[    2.430750] hub 2-1.2:1.0: 4 ports detected
[    2.497819] usb 2-1.6: new full-speed USB device number 5 using ehci_hcd
[    2.583779] hub 2-1.6:1.0: USB hub found
[    2.583940] hub 2-1.6:1.0: 3 ports detected
[    2.697722] usb 2-1.2.1: new high-speed USB device number 6 using ehci_hcd
[    2.850856] usb 2-1.6.1: new full-speed USB device number 7 using ehci_hcd
[    2.939323] input: HID 413c:8157 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input2
[    2.939498] hid-generic 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:1d.0-1.6.1/input0
[    3.004105] usb 2-1.6.2: new full-speed USB device number 8 using ehci_hcd
[    3.094077] input: HID 413c:8158 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input3
[    3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
[  824.543880] Btrfs loaded
[  824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
[  824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
[  825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot
[  825.228574] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[  825.236250] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[  825.497003] btrfs: mismatching generation and generation_v2 found in root item. This root was probably mounted with an older kernel. Resetting all new fields.
[  826.881639] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[  826.913723] systemd[1]: Set hostname to <clawfinger>.
[  829.535709] systemd[1]: Cannot add dependency job for unit lvm.service, ignoring: Unit lvm.service failed to load: No such file or directory. See system logs and 'systemctl status lvm.service' for details.
[  829.535737] systemd[1]: Cannot add dependency job for unit cpufreq.service, ignoring: Unit cpufreq.service failed to load: No such file or directory. See system logs and 'systemctl status cpufreq.service' for details.
[  829.535752] systemd[1]: Cannot add dependency job for unit zeitgeist-daemon.service, ignoring: Unit zeitgeist-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status zeitgeist-daemon.service' for details.
[  829.535786] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
[  829.535834] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[  829.535861] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory. See system logs and 'systemctl status console-kit-daemon.service' for details.
[  829.536380] systemd[1]: Starting Replay Read-Ahead Data...
[  829.554901] systemd[1]: Starting Collect Read-Ahead Data...
[  829.571226] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[  829.571303] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  829.571319] systemd[1]: Starting Login Prompts.
[  829.571328] systemd[1]: Reached target Login Prompts.
[  829.571337] systemd[1]: Starting Remote File Systems.
[  829.571345] systemd[1]: Reached target Remote File Systems.
[  829.571354] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[  829.571362] systemd[1]: Starting Syslog Socket.
[  829.571364] systemd[1]: Socket service syslog.service not loaded, refusing.
[  829.572842] systemd[1]: Failed to listen on Syslog Socket.
[  829.574007] systemd[1]: Starting Arch Daemons.
[  829.574014] systemd[1]: Reached target Arch Daemons.
[  829.574023] systemd[1]: Starting LVM2 metadata daemon socket.
[  829.574048] systemd[1]: Listening on LVM2 metadata daemon socket.
[  829.574055] systemd[1]: Starting Device-mapper event daemon FIFOs.
[  829.574075] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[  829.574081] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[  829.574098] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  829.574106] systemd[1]: Starting Delayed Shutdown Socket.
[  829.574129] systemd[1]: Listening on Delayed Shutdown Socket.
[  829.574218] systemd[1]: Starting udev Kernel Socket.
[  829.574239] systemd[1]: Listening on udev Kernel Socket.
[  829.574284] systemd[1]: Starting udev Control Socket.
[  829.574307] systemd[1]: Listening on udev Control Socket.
[  829.574332] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[  829.574407] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[  829.574419] systemd[1]: Starting Encrypted Volumes.
[  829.574426] systemd[1]: Reached target Encrypted Volumes.
[  829.574436] systemd[1]: Expecting device dev-disk-by\x2duuid-bb356f76\x2dd262\x2d43ca\x2da705\x2da2eab4b6d6ba.device...
[  829.574445] systemd[1]: Expecting device dev-disk-by\x2duuid-2796b7f1\x2d10c6\x2d481b\x2d91cb\x2d07cb7110031c.device...
[  829.574455] systemd[1]: Expecting device dev-disk-by\x2duuid-d169a015\x2d6ef6\x2d47f5\x2da6b2\x2d3db25ecce4a2.device...
[  829.574467] systemd[1]: Starting Journal Socket.
[  829.574507] systemd[1]: Listening on Journal Socket.
[  829.574529] systemd[1]: Mounting Huge Pages File System...
[  829.577956] systemd[1]: Mounting POSIX Message Queue File System...
[  829.591510] systemd[1]: Starting udev Coldplug all Devices...
[  829.594776] systemd[1]: Mounting Debug File System...
[  829.611201] systemd[1]: Starting udev Kernel Device Manager...
[  829.614769] systemd[1]: Starting Journal Service...
[  829.647758] systemd[1]: Started Journal Service.
[  829.647819] systemd[1]: Starting Syslog.
[  829.647843] systemd[1]: Reached target Syslog.
[  829.647879] systemd[1]: Starting home.automount.
[  829.901808] systemd[1]: Set up automount home.automount.
[  830.553864] systemd-udevd[249]: starting version 195
[  831.070954] ACPI: Requesting acpi_cpufreq
[  831.456015] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[  831.456019] ACPI: Power Button [PWRB]
[  831.456058] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[  831.456060] ACPI: Sleep Button [SLPB]
[  831.456097] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[  831.457156] ACPI: Lid Switch [LID0]
[  831.457203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[  831.457206] ACPI: Power Button [PWRF]
[  831.457547] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[  831.457548] AMD IOMMUv2 functionality not available on this system
[  831.615332] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[  831.615336] Disabling lock debugging due to kernel taint
[  831.619625] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7745 MBytes.
[  831.619972] <6>[fglrx]   vendor: 1002 device: 9488 count: 1
[  831.620506] <6>[fglrx] ioport: bar 1, base 0x2000, size: 0x100
[  831.620722] <6>[fglrx] Kernel PAT support is enabled
[  831.620735] <6>[fglrx] module loaded - fglrx 8.97.2 [Jul  4 2012] with 1 minors
[  831.621578] ACPI: Fan [FAN0] (off)
[  831.621623] ACPI: Fan [FAN1] (off)
[  831.631874] vboxdrv: Found 8 processor cores.
[  831.633478] vboxdrv: fAsync=0 offMin=0x19b offMax=0x1b771
[  831.633549] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  831.633550] vboxdrv: Successfully loaded version 4.2.4_OSE (interface 0x001a0004).
[  832.286066] ACPI: AC Adapter [ADP1] (on-line)
[  832.312526] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[  832.315135] acpi device:03: registered as cooling_device10
[  832.315214] ACPI: Video Device [M86] (multi-head: yes  rom: no  post: no)
[  832.315347] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[  832.409308] thermal LNXTHERM:00: registered as thermal_zone0
[  832.409312] ACPI: Thermal Zone [TZ00] (27 C)
[  832.421895] ACPI: Battery Slot [BAT0] (battery present)
[  832.422793] thermal LNXTHERM:01: registered as thermal_zone1
[  832.422797] ACPI: Thermal Zone [TZ01] (69 C)
[  832.590092] microcode: CPU0 sig=0x106e5, pf=0x10, revision=0x3
[  832.970363] input: PC Speaker as /devices/platform/pcspkr/input/input9
[  833.240290] microcode: CPU1 sig=0x106e5, pf=0x10, revision=0x3
[  833.240762] microcode: CPU2 sig=0x106e5, pf=0x10, revision=0x3
[  833.241329] microcode: CPU3 sig=0x106e5, pf=0x10, revision=0x3
[  833.241760] microcode: CPU4 sig=0x106e5, pf=0x10, revision=0x3
[  833.242173] microcode: CPU5 sig=0x106e5, pf=0x10, revision=0x3
[  833.242608] microcode: CPU6 sig=0x106e5, pf=0x10, revision=0x3
[  833.243025] microcode: CPU7 sig=0x106e5, pf=0x10, revision=0x3
[  833.243492] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[  833.265118] wmi: Mapper loaded
[  833.267255] sdhci: Secure Digital Host Controller Interface driver
[  833.267258] sdhci: Copyright(c) Pierre Ossman
[  833.268312] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[  833.268319] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  833.268323] ACPI Warning: 0x0000000000001180-0x00000000000011ff SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[  833.268327] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  833.268329] lpc_ich: Resource conflict(s) found affecting gpio_ich
[  833.512963] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1)
[  833.513049] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[  833.513095] Registered led device: mmc0::
[  833.537204] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA
[  833.570607] input: Dell WMI hotkeys as /devices/virtual/input/input10
[  833.847354] EDAC MC: Ver: 3.0.0
[  833.930269] firewire_ohci 0000:09:00.3: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[  834.096451] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[  834.096454] ite_cir: Using model: ITE8708 CIR transceiver
[  834.096455] ite_cir: TX-capable: 1
[  834.096456] ite_cir: Sample period (ns): 8680
[  834.096457] ite_cir: TX carrier frequency (Hz): 38000
[  834.096458] ite_cir: TX duty cycle (%): 33
[  834.096459] ite_cir: RX low carrier frequency (Hz): 0
[  834.096460] ite_cir: RX high carrier frequency (Hz): 0
[  834.275945] iTCO_vendor_support: vendor-support=0
[  834.294684] cfg80211: Calling CRDA to update world regulatory domain
[  834.301218] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[  834.430008] firewire_core 0000:09:00.3: created device fw0: GUID 324fc0001978e281, S400
[  834.433957] ACPI Warning: 0x0000000000001840-0x000000000000185f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[  834.433962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  834.446316] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50
[  834.977790] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[  834.977796] cdrom: Uniform CD-ROM driver Revision: 3.20
[  834.978266] sr 1:0:0:0: Attached scsi CD-ROM sr0
[  835.102238] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[  835.137263] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[  835.147237] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  835.147687] hda-intel: 0000:02:00.1: Handle VGA-switcheroo audio client
[  835.147810] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
[  835.152252] Registered IR keymap rc-rc6-mce
[  835.152388] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input13
[  835.152451] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[  835.152504] ite_cir: driver has been successfully loaded
[  835.153584] IR NEC protocol handler initialized
[  835.154764] IR RC5(x) protocol handler initialized
[  835.155913] IR RC6 protocol handler initialized
[  835.156910] IR JVC protocol handler initialized
[  835.158134] IR Sony protocol handler initialized
[  835.159392] IR SANYO protocol handler initialized
[  835.188611] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[  835.276976] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[  835.277141] iTCO_wdt: Found a PM55 TCO device (Version=2, TCOBASE=0x0460)
[  835.277332] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  835.297502] Intel(R) Wireless WiFi driver for Linux, in-tree:
[  835.297504] Copyright(c) 2003-2012 Intel Corporation
[  835.297648] iwlwifi 0000:05:00.0: pci_resource_len = 0x00002000
[  835.297651] iwlwifi 0000:05:00.0: pci_resource_base = ffffc900115cc000
[  835.297654] iwlwifi 0000:05:00.0: HW Revision ID = 0x0
[  835.297743] iwlwifi 0000:05:00.0: irq 48 for MSI/MSI-X
[  835.308783] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input14
[  835.309067] IR MCE Keyboard/mouse protocol handler initialized
[  835.359593] lirc_dev: IR Remote Control driver registered, major 248 
[  835.374024] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[  835.374026] IR LIRC bridge handler initialized
[  835.733446] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input15
[  835.912706] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 579772
[  835.935411] iwlwifi 0000:05:00.0: loaded firmware version 8.83.5.1 build 33692
[  835.963621] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
[  835.969136] tg3.c:v3.124 (March 21, 2012)
[  836.006010] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address f0:4d:a2:57:8f:fa
[  836.006014] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[  836.006017] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[  836.006020] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[  836.021663] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
[  836.048283] Adding 10239996k swap on /dev/mapper/cryptpool-cryptswap.  Priority:-1 extents:1 across:10239996k 
[  836.289949] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[  836.289952] iwldvm: Copyright(c) 2003-2012 Intel Corporation
[  836.289970] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG disabled
[  836.289973] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[  836.289975] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[  836.289977] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[  836.289980] iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_P2P disabled
[  836.289983] iwlwifi 0000:05:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[  836.290037] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[  836.293078] iwlwifi 0000:05:00.0: RF_KILL bit toggled to enable radio.
[  836.312171] iwlwifi 0000:05:00.0: device EEPROM VER=0x120, CALIB=0x4
[  836.312174] iwlwifi 0000:05:00.0: Device SKU: 0xF0
[  836.312175] iwlwifi 0000:05:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7
[  836.312371] Registered led device: phy0-led
[  836.315087] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[  836.475282] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
[  837.475528] Linux media interface: v0.10
[  837.492926] usbcore: registered new interface driver uas
[  837.496345] Initializing USB Mass Storage driver...
[  837.496661] scsi6 : usb-storage 2-1.2.1:1.0
[  837.496761] usbcore: registered new interface driver usb-storage
[  837.496763] USB Mass Storage support registered.
[  837.541838] Linux video capture interface: v2.00
[  837.623983] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f)
[  837.633268] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input17
[  837.633374] usbcore: registered new interface driver uvcvideo
[  837.633375] USB Video Class driver (1.1.1)
[  838.232898] usb 2-1.6.3: new full-speed USB device number 9 using ehci_hcd
[  838.377267] Bluetooth: Core ver 2.16
[  838.377291] NET: Registered protocol family 31
[  838.377294] Bluetooth: HCI device and connection manager initialized
[  838.377297] Bluetooth: HCI socket layer initialized
[  838.377299] Bluetooth: L2CAP socket layer initialized
[  838.377306] Bluetooth: SCO socket layer initialized
[  838.380091] usbcore: registered new interface driver btusb
[  838.500252] scsi 6:0:0:0: Direct-Access     WD       15EADS External  1.75 PQ: 0 ANSI: 4
[  838.501570] sd 6:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[  838.502149] sd 6:0:0:0: [sdb] Write Protect is off
[  838.502153] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  838.502663] sd 6:0:0:0: [sdb] No Caching mode page present
[  838.503948] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  838.507572] sd 6:0:0:0: [sdb] No Caching mode page present
[  838.508870] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  848.872033]  sdb: sdb1
[  848.874635] sd 6:0:0:0: [sdb] No Caching mode page present
[  848.874643] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  848.874649] sd 6:0:0:0: [sdb] Attached SCSI disk
[  849.908447] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[  849.908980] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[  849.995776] systemd-journald[250]: Received SIGUSR1
[  851.499990] tg3 0000:0b:00.0: irq 49 for MSI/MSI-X
[  851.617064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  851.660552] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  851.664030] Bluetooth: RFCOMM TTY layer initialized
[  851.664035] Bluetooth: RFCOMM socket layer initialized
[  851.664037] Bluetooth: RFCOMM ver 1.11
[  852.181494] systemd-logind[1538]: Watching system buttons on /dev/input/event7 (Power Button)
[  852.181672] systemd-logind[1538]: Watching system buttons on /dev/input/event8 (Video Bus)
[  852.181837] systemd-logind[1538]: Watching system buttons on /dev/input/event4 (Power Button)
[  852.181997] systemd-logind[1538]: Watching system buttons on /dev/input/event6 (Lid Switch)
[  852.182158] systemd-logind[1538]: Watching system buttons on /dev/input/event5 (Sleep Button)
[  859.045559] <6>[fglrx] ATIF platform detected with notification ID: 0x81
[  859.193173] fglrx_pci 0000:02:00.0: irq 50 for MSI/MSI-X
[  859.193785] <6>[fglrx] Firegl kernel thread PID: 1602
[  859.194065] <6>[fglrx] Firegl kernel thread PID: 1603
[  859.194151] <6>[fglrx] Firegl kernel thread PID: 1604
[  859.194300] <6>[fglrx] IRQ 50 Enabled
[  859.458286] <6>[fglrx] Gart USWC size:1280 M.
[  859.458289] <6>[fglrx] Gart cacheable size:508 M.
[  859.458292] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 
[  859.458294] <6>[fglrx] Reserved FB block: Unshared offset:fbfd000, size:403000 
[  859.458295] <6>[fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000 
[  874.881528] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[  874.884533] iwlwifi 0000:05:00.0: Radio type=0x0-0x2-0x0
[  875.033717] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[  875.036751] iwlwifi 0000:05:00.0: Radio type=0x0-0x2-0x0
[  875.084988] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  883.001326] systemd[1]: PID file /var/run/chronyd.pid not readable (yet?) after start.
[  904.749768] wlan0: authenticate with 00:1f:33:49:5a:ac
[  904.752358] wlan0: send auth to 00:1f:33:49:5a:ac (try 1/3)
[  904.758949] wlan0: authenticated
[  904.759162] iwlwifi 0000:05:00.0: wlan0: disabling HT as WMM/QoS is not supported
[  904.759966] wlan0: associate with 00:1f:33:49:5a:ac (try 1/3)
[  904.762404] wlan0: RX AssocResp from 00:1f:33:49:5a:ac (capab=0x431 status=0 aid=6)
[  904.768567] wlan0: associated
[  904.768606] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  921.839166] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/mapper/cryptpool-crypthome
[  963.527089] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[  963.836148] EXT4-fs (sda1): re-mounted. Opts: commit=0
[  970.689493] EXT4-fs (dm-2): re-mounted. Opts: commit=0
[ 1148.214072] usb 2-1.2.4: new high-speed USB device number 10 using ehci_hcd
[ 1151.119965] fuse init (API version 7.20)
[ 1205.707861] UDF-fs: Partition marked readonly; forcing readonly mount
[ 1205.788800] UDF-fs: INFO Mounting volume 'ARCH_201108', timestamp 2011/08/19 10:00 (103c)
[ 1439.322412] INFO: task gdbus:7482 blocked for more than 120 seconds.
[ 1439.322418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1439.322422] gdbus           D 0000000000000002     0  7482   3077 0x00000000
[ 1439.322430]  ffff8801d06f3e28 0000000000000082 ffff8801d7544890 ffff8801d06f3fd8
[ 1439.322438]  ffff8801d06f3fd8 ffff8801d06f3fd8 ffff88022c1a8000 ffff8801d7544890
[ 1439.322444]  ffff8801d06f3d78 0000000040000040 00007f5ea6cd1ab0 ffff8801d06f3dd0
[ 1439.322451] Call Trace:
[ 1439.322464]  [<ffffffff8137f479>] ? __sys_recvmsg+0x119/0x2b0
[ 1439.322474]  [<ffffffff81085e7a>] ? ttwu_stat+0xaa/0x120
[ 1439.322481]  [<ffffffff81147199>] ? handle_mm_fault+0x259/0x320
[ 1439.322489]  [<ffffffff81491b79>] schedule+0x29/0x70
[ 1439.322499]  [<ffffffff81492605>] rwsem_down_failed_common+0xc5/0x160
[ 1439.322501]  [<ffffffff814926b3>] rwsem_down_write_failed+0x13/0x20
[ 1439.322505]  [<ffffffff81265d03>] call_rwsem_down_write_failed+0x13/0x20
[ 1439.322508]  [<ffffffff81490a65>] ? down_write+0x25/0x27
[ 1439.322511]  [<ffffffff8114d994>] sys_mprotect+0xc4/0x270
[ 1439.322515]  [<ffffffff8119414b>] ? sys_poll+0x6b/0x100
[ 1439.322518]  [<ffffffff81499f2d>] system_call_fastpath+0x1a/0x1f
[ 1845.409646] usb 2-1.2.3: new high-speed USB device number 11 using ehci_hcd
[ 1845.499985] usb-storage 2-1.2.3:1.0: Quirks match for vid 13fe pid 3600: 4000
[ 1845.500036] scsi7 : usb-storage 2-1.2.3:1.0
[ 1846.545183] scsi 7:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 0 CCS
[ 1847.882663] sd 7:0:0:0: [sdc] 7634944 512-byte logical blocks: (3.90 GB/3.64 GiB)
[ 1847.886448] sd 7:0:0:0: [sdc] Write Protect is off
[ 1847.886455] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 1847.890374] sd 7:0:0:0: [sdc] No Caching mode page present
[ 1847.890383] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1847.901934] sd 7:0:0:0: [sdc] No Caching mode page present
[ 1847.901943] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1847.941987]  sdc: sdc1
[ 1847.956214] sd 7:0:0:0: [sdc] No Caching mode page present
[ 1847.956222] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1847.956227] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 1848.277688] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1848.281239] XFS (sdc1): Mounting Filesystem
[ 1849.591770] XFS (sdc1): Starting recovery (logdev: internal)
[ 1849.608681] XFS (sdc1): Ending recovery (logdev: internal)
[ 1894.075896] usb 2-1.2.3: USB disconnect, device number 11
[ 1894.076722] XFS (sdc1): metadata I/O error: block 0x3a3099 ("xlog_iodone") error 5 numblks 64
[ 1894.076729] XFS (sdc1): xfs_do_force_shutdown(0x2) called from line 1074 of file fs/xfs/xfs_log.c.  Return address = 0xffffffffa0bbfe01
[ 1894.076739] XFS (sdc1): Log I/O Error Detected.  Shutting down filesystem
[ 1894.076742] XFS (sdc1): Please umount the filesystem and rectify the problem(s)
[ 1894.076749] XFS (sdc1): xfs_log_force: error 5 returned.
[ 1894.076754] XFS (sdc1): xfs_do_force_shutdown(0x1) called from line 1160 of file fs/xfs/xfs_buf.c.  Return address = 0xffffffffa0b69ad4
[ 1894.127141] XFS (sdc1): xfs_log_force: error 5 returned.
[ 1894.127150] XFS (sdc1): xfs_do_force_shutdown(0x1) called from line 1160 of file fs/xfs/xfs_buf.c.  Return address = 0xffffffffa0b69ad4
[ 1894.127176] XFS (sdc1): xfs_log_force: error 5 returned.
[ 1894.127190] XFS (sdc1): xfs_log_force: error 5 returned.
[ 1919.070093] usb 2-1.2.3: new high-speed USB device number 12 using ehci_hcd
[ 1919.181254] scsi8 : usb-storage 2-1.2.3:1.0
[ 1920.183270] scsi 8:0:0:0: Direct-Access                               0.00 PQ: 0 ANSI: 2
[ 1920.185302] sd 8:0:0:0: [sdc] 7572599 512-byte logical blocks: (3.87 GB/3.61 GiB)
[ 1920.185990] sd 8:0:0:0: [sdc] Write Protect is off
[ 1920.185994] sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
[ 1920.186729] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 1920.186734] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1920.191727] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 1920.191731] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1920.329603]  sdc: sdc1
[ 1920.610842] sd 8:0:0:0: [sdc] Asking for cache data failed
[ 1920.610851] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 1920.610857] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 2723.015817] sdc: detected capacity change from 3877170688 to 0
[ 2814.552353] usb 2-1.2.3: USB disconnect, device number 12
[ 2816.086915] usb 2-1.2.4: USB disconnect, device number 10
[ 5804.005861] wlan0: deauthenticating from 00:1f:33:49:5a:ac by local choice (reason=3)
[ 5804.077809] cfg80211: Calling CRDA to update world regulatory domain
[ 5804.229147] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[ 5804.232233] iwlwifi 0000:05:00.0: Radio type=0x0-0x2-0x0
[ 5804.277707] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5804.291888] tg3 0000:0b:00.0: irq 49 for MSI/MSI-X
[ 5804.408329] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5804.270341] PM: Syncing filesystems ... done.
[ 5805.410856] PM: Preparing system for mem sleep
[ 5806.225000] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 5806.239579] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 5806.253036] PM: Entering mem sleep
[ 5806.253107] Suspending console(s) (use no_console_suspend to debug)
[ 5806.259326] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5806.293922] sd 0:0:0:0: [sda] Stopping disk
[ 5806.312054] <6>[fglrx] IRQ 50 Disabled
[ 5806.312069] ACPI handle has no context!
[ 5806.312104] <6>[fglrx] Preparing suspend fglrx in kernel.
[ 5806.654396] <6>[fglrx] Suspending fglrx in kernel completed.
[ 5806.654396] <6>[fglrx] Power down the ASIC .
[ 5806.905929] PM: suspend of devices complete after 653.190 msecs
[ 5806.906192] PM: late suspend of devices complete after 0.261 msecs
[ 5806.919081] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 5806.945681] PM: noirq suspend of devices complete after 39.524 msecs
[ 5806.946032] ACPI: Preparing to enter system sleep state S3
[ 5806.955819] PM: Saving platform NVS memory
[ 5806.959813] Disabling non-boot CPUs ...
[ 5806.960248] Broke affinity for irq 41
[ 5807.062039] smpboot: CPU 1 is now offline
[ 5807.062817] Broke affinity for irq 42
[ 5807.165279] smpboot: CPU 2 is now offline
[ 5807.166011] Broke affinity for irq 43
[ 5807.268522] smpboot: CPU 3 is now offline
[ 5807.269255] Broke affinity for irq 44
[ 5807.371751] smpboot: CPU 4 is now offline
[ 5807.474985] smpboot: CPU 5 is now offline
[ 5807.578220] smpboot: CPU 6 is now offline
[ 5807.681451] smpboot: CPU 7 is now offline
[ 5807.681826] Extended CMOS year: 2000
[ 5807.682739] ACPI: Low-level resume complete
[ 5807.682779] PM: Restoring platform NVS memory
[ 5807.683189] Extended CMOS year: 2000
[ 5807.683254] Enabling non-boot CPUs ...
[ 5807.683328] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 5807.699494] hpet: hpet3 irq 41 for MSI
[ 5807.699511] CPU1 is up
[ 5807.699588] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 5807.716146] hpet: hpet4 irq 42 for MSI
[ 5807.716163] CPU2 is up
[ 5807.716236] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 5807.732797] hpet: hpet5 irq 43 for MSI
[ 5807.732813] CPU3 is up
[ 5807.732888] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 5807.749451] hpet: hpet6 irq 44 for MSI
[ 5807.749468] CPU4 is up
[ 5807.749538] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 5807.766088] CPU5 is up
[ 5807.766186] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 5807.782737] CPU6 is up
[ 5807.782816] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 5807.799389] CPU7 is up
[ 5807.805828] ACPI: Waking up from system sleep state S3
[ 5807.859403] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 5807.926541] PM: noirq resume of devices complete after 107.201 msecs
[ 5807.926707] PM: early resume of devices complete after 0.138 msecs
[ 5807.926757] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5807.926772] pci 0000:00:1e.0: setting latency timer to 64
[ 5807.926774] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5807.926777] ahci 0000:00:1f.2: setting latency timer to 64
[ 5807.926840] iwlwifi 0000:05:00.0: RF_KILL bit toggled to enable radio.
[ 5807.926940] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5807.927008] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X
[ 5807.930287] <6>[fglrx] Power up the ASIC
[ 5807.930304] <6>[fglrx] Preparing resume fglrx in kernel.
[ 5808.012673] <6>[fglrx] Resuming fglrx in kernel completed.
[ 5808.012759] <6>[fglrx] IRQ 50 Enabled
[ 5808.165937] usb 2-1.6: reset full-speed USB device number 5 using ehci_hcd
[ 5808.245704] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5808.252429] ata6: SATA link down (SStatus 0 SControl 300)
[ 5808.312190] ata2.00: configured for UDMA/100
[ 5808.428946] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 5808.478877] firewire_core 0000:09:00.3: rediscovered device fw0
[ 5808.505635] usb 2-1.1: reset low-speed USB device number 3 using ehci_hcd
[ 5808.845309] usb 2-1.2: reset high-speed USB device number 4 using ehci_hcd
[ 5808.995151] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 5809.178241] usb 2-1.6.1: reset full-speed USB device number 7 using ehci_hcd
[ 5809.328091] usb 2-1.6.2: reset full-speed USB device number 8 using ehci_hcd
[ 5810.923318] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5811.121137] ata1.00: configured for UDMA/133
[ 5811.133381] sd 0:0:0:0: [sda] Starting disk
[ 5811.141465] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
[ 5811.144509] iwlwifi 0000:05:00.0: Radio type=0x0-0x2-0x0
[ 5811.193105] PM: resume of devices complete after 3269.476 msecs
[ 5811.193345] PM: Finishing wakeup.
[ 5811.193346] Restarting tasks ... done.
[ 5811.197373] video LNXVIDEO:00: Restoring backlight state
[ 5811.197413] usb 2-1.6.3: USB disconnect, device number 9
[ 5811.200911] usb 2-1.2.1: USB disconnect, device number 6
[ 5812.468469] usb 2-1.6.3: new full-speed USB device number 13 using ehci_hcd
[ 5817.830213] usb 2-1.2.1: new high-speed USB device number 14 using ehci_hcd
[ 5817.874249] wlan0: authenticate with 00:1f:33:49:5a:ac
[ 5817.875383] wlan0: send auth to 00:1f:33:49:5a:ac (try 1/3)
[ 5817.915759] scsi9 : usb-storage 2-1.2.1:1.0
[ 5817.987712] VFS: busy inodes on changed media or resized disk sr0
[ 5818.076430] wlan0: send auth to 00:1f:33:49:5a:ac (try 2/3)
[ 5818.191517] wlan0: authenticated
[ 5818.191920] iwlwifi 0000:05:00.0: wlan0: disabling HT as WMM/QoS is not supported
[ 5818.192924] wlan0: associate with 00:1f:33:49:5a:ac (try 1/3)
[ 5818.351994] wlan0: RX AssocResp from 00:1f:33:49:5a:ac (capab=0x431 status=0 aid=7)
[ 5818.354511] wlan0: associated
[ 5818.354559] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5818.916600] scsi 9:0:0:0: Direct-Access     WD       15EADS External  1.75 PQ: 0 ANSI: 4
[ 5818.917547] sd 9:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 5818.918253] sd 9:0:0:0: [sdb] Write Protect is off
[ 5818.918258] sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 5818.918771] sd 9:0:0:0: [sdb] No Caching mode page present
[ 5818.918776] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5818.921382] sd 9:0:0:0: [sdb] No Caching mode page present
[ 5818.921386] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5818.947446]  sdb: sdb1
[ 5818.949759] sd 9:0:0:0: [sdb] No Caching mode page present
[ 5818.949763] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 5818.949765] sd 9:0:0:0: [sdb] Attached SCSI disk

Offline

#2 2012-11-13 23:33:54

zmv
Member
Registered: 2012-11-04
Posts: 1

Re: [Systemd] Very long boot time

I don't really know how to fix your problem, but how does that fit in this board?

Offline

#3 2012-11-14 00:12:41

WorMzy
Forum Moderator
From: Scotland
Registered: 2010-06-16
Posts: 5,357

Re: [Systemd] Very long boot time

828766ms (kernel)

*whistles*

Impressive. It takes approximately 14 minutes to load your kernel. How did you manage that? Is it a custom kernel with everything compiled in? Or are you running a HDD operating at something rediculous like 200 RPM?

Honestly, you either have serious hardware problems, or you're trolling.


Sakura:-
Mobo: ASUS P8Z77-V PRO // Processor: Intel Core i7-3770K 3.4GHz // GFX: nVidia GeForce GTX 970 Ti // RAM: 32GB (4x 8GB) Corsair DDR3 (@ 2133MHz) // Storage: 1x 3TB Seagate SATAII 5x 1TB Samsung SATAII, 2x 120GB Corsair SSD

Offline

#4 2012-11-14 00:45:28

hiciu
Member
Registered: 2010-08-11
Posts: 77

Re: [Systemd] Very long boot time

lasombra wrote:

Dmesg shows:

[    3.094424] hid-generic 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:1d.0-1.6.2/input0
[  824.543880] Btrfs loaded
[  824.582726] device fsid 02cda685-4334-4137-a111-ffc149f72b91 devid 1 transid 219619 /dev/dm-4
[  824.589373] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/dm-1
[  825.172465] device fsid f90574c8-73b1-4d21-b0f9-c8383e90f702 devid 1 transid 19638 /dev/mapper/cryptpool-cryptroot

Here is problem #1. Why you had to wait almost 14 minutes for btrfs to load? You are aware btrfs is still under development? Can you boot with "verbose" parameter in kernel command line (see https://wiki.archlinux.org/index.php/Bo … ight_Debug)?

lasombra wrote:
[ 1439.322412] INFO: task gdbus:7482 blocked for more than 120 seconds.
[ 1439.322418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1439.322422] gdbus           D 0000000000000002     0  7482   3077 0x00000000
[ 1439.322430]  ffff8801d06f3e28 0000000000000082 ffff8801d7544890 ffff8801d06f3fd8
[ 1439.322438]  ffff8801d06f3fd8 ffff8801d06f3fd8 ffff88022c1a8000 ffff8801d7544890
[ 1439.322444]  ffff8801d06f3d78 0000000040000040 00007f5ea6cd1ab0 ffff8801d06f3dd0
[ 1439.322451] Call Trace:
[ 1439.322464]  [<ffffffff8137f479>] ? __sys_recvmsg+0x119/0x2b0
[ 1439.322474]  [<ffffffff81085e7a>] ? ttwu_stat+0xaa/0x120
[ 1439.322481]  [<ffffffff81147199>] ? handle_mm_fault+0x259/0x320
[ 1439.322489]  [<ffffffff81491b79>] schedule+0x29/0x70
[ 1439.322499]  [<ffffffff81492605>] rwsem_down_failed_common+0xc5/0x160
[ 1439.322501]  [<ffffffff814926b3>] rwsem_down_write_failed+0x13/0x20
[ 1439.322505]  [<ffffffff81265d03>] call_rwsem_down_write_failed+0x13/0x20
[ 1439.322508]  [<ffffffff81490a65>] ? down_write+0x25/0x27
[ 1439.322511]  [<ffffffff8114d994>] sys_mprotect+0xc4/0x270
[ 1439.322515]  [<ffffffff8119414b>] ? sys_poll+0x6b/0x100
[ 1439.322518]  [<ffffffff81499f2d>] system_call_fastpath+0x1a/0x1f

Here is problem #2. I have no idea what gdbus is. Whatever it is, i'm 100% sure it should not fail like this; it's probably kernel bug. Can you reproduce this problem with linux-lts?

edit: I accidentally a word
edit2: this is not related (https://bbs.archlinux.org/viewtopic.php?id=152878)? This could be hw problem.

Last edited by hiciu (2012-11-14 01:49:25)

Offline

#5 2012-11-14 02:46:34

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,412

Re: [Systemd] Very long boot time

I think the kernel taking so long to laod would indicate a hw problemt to me as well.  Boot with the live media and sue smartctl on that.

Offline

#6 2012-11-14 07:32:10

lasombra
Member
From: Luzern
Registered: 2011-09-01
Posts: 43

Re: [Systemd] Very long boot time

@WorMzy:
1. No I am not trolling. Nevertheless, these times are very very strange indeed. Therefore I did reboot the whole system again and now I get the following

Startup finished in 35133ms (kernel) + 67946ms (userspace) = 103080ms

Still a lot IMHO
2. No custom kernel. It's the latest kernel

@hiciu
1.  I don't know why it took 14' but I know that btrfs is still in development, but so far I never had such problems
2. boot with "verbose" parameter in kernel command line > yeah, will do that
3. it seems that on onther boots, there are other tasks which are blocked for more than 120s, so it's not always the same. Will check further...

Offline

#7 2012-12-19 20:02:34

nixIT
Member
Registered: 2010-01-13
Posts: 394

Re: [Systemd] Very long boot time

not sure if OP is still having this issue, but I was having a similar issue, wasn't sure where to begin so I was going to do a complete re-install killing my partitions and all.

I loaded up gparted deleted my extended partition which had my swap and data drive on it.  Recreated both partitions as primary adjusted fstab to reflect the changes and rebooted... BAM, booted faster then ever.

--nixIT


ASRock 970 Extreme4  | AMD FX 8350 | 32GB G.SKILL Ripjaw X  | 180GB Corsair Force Series GS SSD | MSI GeForce GTX 960 GTX Gaming 4G 4GB

Offline

#8 2012-12-20 12:00:36

lasombra
Member
From: Luzern
Registered: 2011-09-01
Posts: 43

Re: [Systemd] Very long boot time

I also did a complete re installation of the system. I use ext4 instead of btrfs. The times are still not that impressive, but better

12:58:30-lasombra@localhost: ~
> systemd-analyze 
Startup finished in 34871ms (kernel) + 31648ms (userspace) = 66520ms
12:58:34-lasombra@localhost: ~
> systemd-analyze blame
  6935ms NetworkManager.service
  3376ms gdm.service
  3173ms avahi-daemon.service
  3130ms systemd-logind.service
  2254ms crashplan.service
  1486ms colord.service
  1415ms polkit.service
  1123ms wpa_supplicant.service
  1050ms cpupower.service
  1026ms systemd-binfmt.service
   940ms systemd-remount-fs.service
   817ms dev-mqueue.mount
   727ms systemd-udevd.service
   707ms sys-kernel-debug.mount
   694ms dev-hugepages.mount
   670ms systemd-udev-trigger.service
   659ms lm_sensors.service
   631ms proc-sys-fs-binfmt_misc.mount
   569ms systemd-sysctl.service
   466ms systemd-tmpfiles-setup.service
   411ms boot.mount
   308ms rtkit-daemon.service
   266ms laptop-mode.service
   262ms udisks2.service
   207ms lvmetad.service
   157ms systemd-vconsole-setup.service
   107ms home.mount
    99ms upower.service
    95ms accounts-daemon.service
    70ms systemd-user-sessions.service
    33ms tmp.mount
     2ms sys-fs-fuse-connections.mount

Offline

#9 2012-12-20 14:16:01

nixIT
Member
Registered: 2010-01-13
Posts: 394

Re: [Systemd] Very long boot time

I spoke too soon.  Came into work today and booted up, after 12 minutes my boot was still hanging with:

systemd-fsck[265]: /dev/sda3

yesterday my the number in brackets was 244.

I ended up booting to a live CD (linux mint) mounting my data drive, which is /dev/sda3, and deleting a couple folders, and when I rebooted, the system came up.  So I'm not sure what's going on, hard drive dying?  Though Before I put Arch on this laptop, everything was running smoothly.

--nixIT


ASRock 970 Extreme4  | AMD FX 8350 | 32GB G.SKILL Ripjaw X  | 180GB Corsair Force Series GS SSD | MSI GeForce GTX 960 GTX Gaming 4G 4GB

Offline

#10 2012-12-20 16:06:55

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,412

Re: [Systemd] Very long boot time

As I stated a month ago in post #5, I really really really think you all need to take a good look at the health of your drives. Use smartmontools, there is a wiki page for it and everything to get your started.

Offline

#11 2012-12-20 17:08:16

nixIT
Member
Registered: 2010-01-13
Posts: 394

Re: [Systemd] Very long boot time

@WonderWoofy
Thanx for the info, was looking for a tool to test the drive.  I just ran it, here are the results:

$ sudo smartctl -t short /dev/sda
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.6.10-1-ARCH] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 2 minutes for test to complete.
Test will complete after Thu Dec 20 11:58:04 2012

Use smartctl -X to abort test.
$ sudo smartctl -H /dev/sda
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.6.10-1-ARCH] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

I am running the long test now, it will complete in about 1 hour

The problem I have appears to be on the second partition that gets mounted.  /dev/sda has 2 partitions:

/dev/sda1  is mounted as  /
/dev/sda2  gets mounted as /mnt/doitdata

in fstab, if I have the mount line for /dev/sda2, that's where my system hangs on the systemd-fsck line.  If I remove the mount point for /dev/sda2, the system boots without problem.  I even deleted the /dev/sda2 partition (along with all data), and recreated it as ext4, re-added the mount point and BAM, it hangs on the systemd-fsck line.

when booting in the grub boot menu if I chose the boot option of Fallback initramfs, there is a 60% chance that my system will boot fine.  I don't think it's hardware related as prior to putting arch on last week, I was running linux mint with zero issues.

I'm not sure what my issue is, and I'd hate to have to completely wipe my drive and start over, but I'm beginning to think that's what I need to do, as I cannot depend on my system booting properly.

btw, currently /dev/sda2 is currently empty and my system still hung on bootup.

--nixIT


ASRock 970 Extreme4  | AMD FX 8350 | 32GB G.SKILL Ripjaw X  | 180GB Corsair Force Series GS SSD | MSI GeForce GTX 960 GTX Gaming 4G 4GB

Offline

#12 2012-12-20 20:35:56

lasombra
Member
From: Luzern
Registered: 2011-09-01
Posts: 43

Re: [Systemd] Very long boot time

My disk seems also fine

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD6400BEVT-75A0RT0
Serial Number:    WD-WX91C8077575
LU WWN Device Id: 5 0014ee 600865d25
Firmware Version: 01.01A01
User Capacity:    640,135,028,736 bytes [640 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Thu Dec 20 21:36:56 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 248)	Self-test routine in progress...
					80% of test remaining.
Total time to complete Offline 
data collection: 		(16380) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 190) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7037)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   184   181   021    Pre-fail  Always       -       1775
  4 Start_Stop_Count        0x0032   079   079   000    Old_age   Always       -       21418
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       4329
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1828
191 G-Sense_Error_Rate      0x0032   001   001   000    Old_age   Always       -       2336
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       512
193 Load_Cycle_Count        0x0032   161   161   000    Old_age   Always       -       119448
194 Temperature_Celsius     0x0022   106   089   000    Old_age   Always       -       41
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       1
240 Head_Flying_Hours       0x0032   095   095   000    Old_age   Always       -       4000
241 Total_LBAs_Written      0x0032   200   200   000    Old_age   Always       -       13521667898
242 Total_LBAs_Read         0x0032   200   200   000    Old_age   Always       -       14814445183
254 Free_Fall_Sensor        0x0032   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Interrupted (host reset)      90%      4329         -
# 2  Extended offline    Completed without error       00%      4329         -
# 3  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Offline

#13 2013-01-12 00:03:51

nixIT
Member
Registered: 2010-01-13
Posts: 394

Re: [Systemd] Very long boot time

I ended up wiping my drive, and putting in the latest Arch install media, and during boot, after the system logs in as root and when it loads the sound driver, the system hard locks up.  I then tried the boot disk from November, and same thing. 

Odd thing is, I installed the latest Linux Mint 14 with no problem.  So, I'm puzzled as to what it could be.

any ideas?  I ran the HP hardware diagnostic, and the system came back clean.

--nixIT


ASRock 970 Extreme4  | AMD FX 8350 | 32GB G.SKILL Ripjaw X  | 180GB Corsair Force Series GS SSD | MSI GeForce GTX 960 GTX Gaming 4G 4GB

Offline

#14 2013-01-19 14:44:05

lasombra
Member
From: Luzern
Registered: 2011-09-01
Posts: 43

Re: [Systemd] Very long boot time

Still my boot time is not so impressive. What can be done to improve "NetworkManager" or "systemd-logind"?

systemd-analyze 
Startup finished in 18774ms (kernel) + 31675ms (userspace) = 50450ms
> systemd-analyze blame
  4784ms NetworkManager.service
  3412ms avahi-daemon.service
  3348ms systemd-logind.service
  3208ms gdm.service
  1923ms rtkit-daemon.service
  1850ms cpupower.service
  1699ms crashplan.service
  1357ms lm_sensors.service
  1212ms systemd-binfmt.service
   993ms colord.service
   732ms wpa_supplicant.service
   596ms systemd-remount-fs.service
   543ms systemd-udevd.service
   529ms systemd-udev-trigger.service
   487ms dev-mqueue.mount
   439ms systemd-tmpfiles-setup.service
   424ms polkit.service
   329ms laptop-mode.service
   258ms proc-sys-fs-binfmt_misc.mount
   210ms systemd-user-sessions.service
   200ms systemd-vconsole-setup.service
   195ms boot.mount
   193ms udisks2.service
   116ms home.mount
    96ms systemd-sysctl.service
    81ms accounts-daemon.service
    75ms sys-kernel-debug.mount
    72ms upower.service
    59ms lvmetad.service
    50ms dev-hugepages.mount
    13ms tmp.mount
     2ms sys-fs-fuse-connections.mount

Offline

#15 2013-01-19 16:15:31

WorMzy
Forum Moderator
From: Scotland
Registered: 2010-06-16
Posts: 5,357

Re: [Systemd] Very long boot time

From the look of it, you're suffering from slow media. Follow this:  https://wiki.archlinux.org/index.php/Boot#Optimization and see if it helps.


Sakura:-
Mobo: ASUS P8Z77-V PRO // Processor: Intel Core i7-3770K 3.4GHz // GFX: nVidia GeForce GTX 970 Ti // RAM: 32GB (4x 8GB) Corsair DDR3 (@ 2133MHz) // Storage: 1x 3TB Seagate SATAII 5x 1TB Samsung SATAII, 2x 120GB Corsair SSD

Offline

#16 2013-05-14 20:30:37

archbawks
Banned
Registered: 2013-03-17
Posts: 75

Re: [Systemd] Very long boot time

Is this a fresh system install?

Have you partitioned the disk before?
How did you partition the disk this time?

Mechanical or SS?

Offline

Board footer

Powered by FluxBB