You are not logged in.

#1 2013-01-17 13:41:25

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Login Problems with gnome

Hi,

I have a Problem that I restarted my arch and after reboot i typed my pw in and then a message comes up:

"oh no! something has gone wrong. a problem has occurred and the system cannot recover."

and it will retry or reboot.. the problem is that this doesn't help.

I've googled a lot and searched here in the forum and wiki and some people have nearly the same problem, but no solution really works for me sad

here is my :0-greeter.log:

      JS LOG: Error: Requiring IBus, version none: Typelib file for namespace 'IBus' (any version) not found
failed to create drawable
      JS LOG: GNOME Shell started at Thu Jan 17 2013 14:24:30 GMT+0100 (CET)
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
failed to create drawable
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0.  This shouldn't happen!
Window manager warning: Log level 8: g_source_remove: assertion `tag > 0' failed
gnome-session[1156]: WARNING: Detected that screensaver has left the bus
gnome-session[1156]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.

** (gnome-settings-daemon:1178): WARNING **: Name taken or bus went away - shutting down
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

(gnome-settings-daemon:1178): wacom-plugin-CRITICAL **: gsd_wacom_device_get_device_type: assertion `GSD_IS_WACOM_DEVICE (device)' failed

I see some problems here, but I can't really see THE problem which causes the problem that I cannot start my system.
Can someone help please?

Offline

#2 2013-01-17 13:58:21

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 13,804
Website

Re: Login Problems with gnome

Could you also post your Xorg log?


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#3 2013-01-17 14:04:16

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

Of course smile

this is for xorg.0.log:

[     3.907] 
X.Org X Server 1.13.1
Release Date: 2012-12-13
[     3.907] X Protocol Version 11, Revision 0
[     3.907] Build Operating System: Linux 3.7.0-1-ARCH x86_64 
[     3.907] Current Operating System: Linux c1337bPCArch 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
[     3.907] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sdb8
[     3.907] Build Date: 16 December 2012  04:45:14PM
[     3.907]  
[     3.907] Current version of pixman: 0.28.2
[     3.907] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.907] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.907] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 17 14:24:26 2013
[     3.909] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.912] (==) No Layout section.  Using the first Screen section.
[     3.912] (==) No screen section available. Using defaults.
[     3.912] (**) |-->Screen "Default Screen Section" (0)
[     3.912] (**) |   |-->Monitor "<default monitor>"
[     3.912] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     3.912] (==) Automatically adding devices
[     3.912] (==) Automatically enabling devices
[     3.912] (==) Automatically adding GPU devices
[     3.917] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[     3.917] 	Entry deleted from font path.
[     3.919] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     3.919] 	Entry deleted from font path.
[     3.919] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     3.920] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     3.920] 	Entry deleted from font path.
[     3.920] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     3.920] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[     3.920] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.920] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.920] (II) Loader magic: 0x7fcc40
[     3.920] (II) Module ABI versions:
[     3.920] 	X.Org ANSI C Emulation: 0.4
[     3.920] 	X.Org Video Driver: 13.1
[     3.920] 	X.Org XInput driver : 18.0
[     3.920] 	X.Org Server Extension : 7.0
[     3.920] (II) config/udev: Adding drm device (/dev/dri/card0)
[     4.538] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21fa rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[     4.538] (II) Open ACPI successful (/var/run/acpid.socket)
[     4.538] Initializing built-in extension Generic Event Extension
[     4.538] Initializing built-in extension SHAPE
[     4.538] Initializing built-in extension MIT-SHM
[     4.538] Initializing built-in extension XInputExtension
[     4.538] Initializing built-in extension XTEST
[     4.538] Initializing built-in extension BIG-REQUESTS
[     4.538] Initializing built-in extension SYNC
[     4.538] Initializing built-in extension XKEYBOARD
[     4.538] Initializing built-in extension XC-MISC
[     4.538] Initializing built-in extension SECURITY
[     4.538] Initializing built-in extension XINERAMA
[     4.538] Initializing built-in extension XFIXES
[     4.538] Initializing built-in extension RENDER
[     4.538] Initializing built-in extension RANDR
[     4.538] Initializing built-in extension COMPOSITE
[     4.538] Initializing built-in extension DAMAGE
[     4.538] Initializing built-in extension MIT-SCREEN-SAVER
[     4.538] Initializing built-in extension DOUBLE-BUFFER
[     4.538] Initializing built-in extension RECORD
[     4.538] Initializing built-in extension DPMS
[     4.538] Initializing built-in extension X-Resource
[     4.539] Initializing built-in extension XVideo
[     4.539] Initializing built-in extension XVideo-MotionCompensation
[     4.539] Initializing built-in extension XFree86-VidModeExtension
[     4.539] Initializing built-in extension XFree86-DGA
[     4.539] Initializing built-in extension XFree86-DRI
[     4.539] Initializing built-in extension DRI2
[     4.539] (II) LoadModule: "glx"
[     4.542] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.544] (II) Module glx: vendor="X.Org Foundation"
[     4.544] 	compiled for 1.13.1, module version = 1.0.0
[     4.544] 	ABI class: X.Org Server Extension, version 7.0
[     4.544] (==) AIGLX enabled
[     4.544] Loading extension GLX
[     4.544] (==) Matched intel as autoconfigured driver 0
[     4.544] (==) Matched intel as autoconfigured driver 1
[     4.544] (==) Matched vesa as autoconfigured driver 2
[     4.544] (==) Matched modesetting as autoconfigured driver 3
[     4.544] (==) Matched fbdev as autoconfigured driver 4
[     4.544] (==) Assigned the driver to the xf86ConfigLayout
[     4.544] (II) LoadModule: "intel"
[     4.545] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     4.549] (II) Module intel: vendor="X.Org Foundation"
[     4.549] 	compiled for 1.13.1, module version = 2.20.17
[     4.549] 	Module class: X.Org Video Driver
[     4.549] 	ABI class: X.Org Video Driver, version 13.1
[     4.549] (II) LoadModule: "vesa"
[     4.549] (WW) Warning, couldn't open module vesa
[     4.549] (II) UnloadModule: "vesa"
[     4.549] (II) Unloading vesa
[     4.549] (EE) Failed to load module "vesa" (module does not exist, 0)
[     4.549] (II) LoadModule: "modesetting"
[     4.549] (WW) Warning, couldn't open module modesetting
[     4.549] (II) UnloadModule: "modesetting"
[     4.549] (II) Unloading modesetting
[     4.549] (EE) Failed to load module "modesetting" (module does not exist, 0)
[     4.549] (II) LoadModule: "fbdev"
[     4.549] (WW) Warning, couldn't open module fbdev
[     4.549] (II) UnloadModule: "fbdev"
[     4.549] (II) Unloading fbdev
[     4.549] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     4.550] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
[     4.551] (++) using VT number 1

[     4.551] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.551] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     4.551] (==) intel(0): RGB weight 888
[     4.551] (==) intel(0): Default visual is TrueColor
[     4.551] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[     4.551] (**) intel(0): Relaxed fencing enabled
[     4.551] (**) intel(0): Wait on SwapBuffers? enabled
[     4.551] (**) intel(0): Triple buffering? enabled
[     4.551] (**) intel(0): Framebuffer tiled
[     4.551] (**) intel(0): Pixmaps tiled
[     4.551] (**) intel(0): 3D buffers tiled
[     4.552] (**) intel(0): SwapBuffers wait enabled
[     4.552] (==) intel(0): video overlay key set to 0x101fe
[     4.552] (II) intel(0): Output LVDS1 has no monitor section
[     4.552] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[     4.563] (II) intel(0): Output VGA1 has no monitor section
[     4.590] (II) intel(0): Output HDMI1 has no monitor section
[     4.630] (II) intel(0): Output DP1 has no monitor section
[     4.643] (II) intel(0): Output HDMI2 has no monitor section
[     4.656] (II) intel(0): Output HDMI3 has no monitor section
[     4.696] (II) intel(0): Output DP2 has no monitor section
[     4.736] (II) intel(0): Output DP3 has no monitor section
[     4.737] (II) intel(0): EDID for output LVDS1
[     4.737] (II) intel(0): Manufacturer: LGD  Model: 2d8  Serial#: 0
[     4.737] (II) intel(0): Year: 2010  Week: 0
[     4.737] (II) intel(0): EDID Version: 1.3
[     4.737] (II) intel(0): Digital Display Input
[     4.737] (II) intel(0): Max Image Size [cm]: horiz.: 28  vert.: 16
[     4.737] (II) intel(0): Gamma: 2.20
[     4.737] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[     4.737] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[     4.737] (II) intel(0): First detailed timing is preferred mode
[     4.737] (II) intel(0): redX: 0.585 redY: 0.349   greenX: 0.341 greenY: 0.543
[     4.737] (II) intel(0): blueX: 0.159 blueY: 0.127   whiteX: 0.313 whiteY: 0.329
[     4.737] (II) intel(0): Manufacturer's mask: 0
[     4.737] (II) intel(0): Supported detailed timing:
[     4.737] (II) intel(0): clock: 75.2 MHz   Image Size:  277 x 156 mm
[     4.737] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1478 h_blank_end 1582 h_border: 0
[     4.737] (II) intel(0): v_active: 768  v_sync: 772  v_sync_end 779 v_blanking: 792 v_border: 0
[     4.737] (II) intel(0):  LG Display
[     4.737] (II) intel(0):  LP125WH2-SLB1
[     4.737] (II) intel(0): EDID (in hex):
[     4.737] (II) intel(0): 	00ffffffffffff0030e4d80200000000
[     4.737] (II) intel(0): 	00140103801c1078ead4e59559578b28
[     4.737] (II) intel(0): 	20505400000001010101010101010101
[     4.737] (II) intel(0): 	010101010101601d56d8500018303040
[     4.737] (II) intel(0): 	4700159c1000001b0000000000000000
[     4.737] (II) intel(0): 	00000000000000000000000000fe004c
[     4.737] (II) intel(0): 	4720446973706c61790a2020000000fe
[     4.737] (II) intel(0): 	004c503132355748322d534c42310084
[     4.738] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[     4.738] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[     4.738] (II) intel(0): Printing probed modes for output LVDS1
[     4.738] (II) intel(0): Modeline "1366x768"x60.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)
[     4.738] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     4.738] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     4.738] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     4.738] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     4.750] (II) intel(0): EDID for output VGA1
[     4.776] (II) intel(0): EDID for output HDMI1
[     4.816] (II) intel(0): EDID for output DP1
[     4.830] (II) intel(0): EDID for output HDMI2
[     4.843] (II) intel(0): EDID for output HDMI3
[     4.883] (II) intel(0): EDID for output DP2
[     4.923] (II) intel(0): EDID for output DP3
[     4.923] (II) intel(0): Output LVDS1 connected
[     4.923] (II) intel(0): Output VGA1 disconnected
[     4.923] (II) intel(0): Output HDMI1 disconnected
[     4.923] (II) intel(0): Output DP1 disconnected
[     4.923] (II) intel(0): Output HDMI2 disconnected
[     4.923] (II) intel(0): Output HDMI3 disconnected
[     4.923] (II) intel(0): Output DP2 disconnected
[     4.923] (II) intel(0): Output DP3 disconnected
[     4.923] (II) intel(0): Using exact sizes for initial modes
[     4.923] (II) intel(0): Output LVDS1 using initial mode 1366x768
[     4.923] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[     4.923] (II) intel(0): Kernel page flipping support detected, enabling
[     4.923] (==) intel(0): DPI set to (96, 96)
[     4.923] (II) Loading sub module "fb"
[     4.923] (II) LoadModule: "fb"
[     4.924] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.925] (II) Module fb: vendor="X.Org Foundation"
[     4.925] 	compiled for 1.13.1, module version = 1.0.0
[     4.925] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.925] (II) Loading sub module "dri2"
[     4.925] (II) LoadModule: "dri2"
[     4.925] (II) Module "dri2" already built-in
[     4.925] (==) Depth 24 pixmap format is 32 bpp
[     4.926] (II) intel(0): [DRI2] Setup complete
[     4.926] (II) intel(0): [DRI2]   DRI driver: i965
[     4.926] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[     4.928] (II) UXA(0): Driver registered support for the following operations:
[     4.928] (II)         solid
[     4.928] (II)         copy
[     4.928] (II)         composite (RENDER acceleration)
[     4.928] (II)         put_image
[     4.928] (II)         get_image
[     4.929] (==) intel(0): Backing store disabled
[     4.929] (==) intel(0): Silken mouse enabled
[     4.929] (II) intel(0): Initializing HW Cursor
[     4.929] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.932] (==) intel(0): DPMS enabled
[     4.932] (==) intel(0): Intel XvMC decoder enabled
[     4.932] (II) intel(0): Set up textured video
[     4.932] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[     4.932] (II) intel(0): direct rendering: DRI2 Enabled
[     4.932] (==) intel(0): hotplug detection: "enabled"
[     4.956] (--) RandR disabled
[     4.980] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     4.980] (II) AIGLX: enabled GLX_INTEL_swap_event
[     4.980] (II) AIGLX: enabled GLX_ARB_create_context
[     4.980] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     4.980] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[     4.980] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[     4.980] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     4.980] (II) AIGLX: Loaded and initialized i965
[     4.980] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.980] (II) intel(0): Setting screen physical size to 361 x 203
[     5.020] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[     5.020] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     5.020] (II) LoadModule: "evdev"
[     5.020] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     5.022] (II) Module evdev: vendor="X.Org Foundation"
[     5.022] 	compiled for 1.13.0, module version = 2.7.3
[     5.022] 	Module class: X.Org XInput Driver
[     5.022] 	ABI class: X.Org XInput driver, version 18.0
[     5.022] (II) Using input driver 'evdev' for 'Power Button'
[     5.022] (**) Power Button: always reports core events
[     5.022] (**) evdev: Power Button: Device: "/dev/input/event5"
[     5.022] (--) evdev: Power Button: Vendor 0 Product 0x1
[     5.022] (--) evdev: Power Button: Found keys
[     5.022] (II) evdev: Power Button: Configuring as keyboard
[     5.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[     5.022] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.022] (**) Option "xkb_rules" "evdev"
[     5.022] (**) Option "xkb_model" "evdev"
[     5.022] (**) Option "xkb_layout" "us"
[     5.042] (II) config/udev: Adding input device Video Bus (/dev/input/event18)
[     5.042] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     5.043] (II) Using input driver 'evdev' for 'Video Bus'
[     5.043] (**) Video Bus: always reports core events
[     5.043] (**) evdev: Video Bus: Device: "/dev/input/event18"
[     5.043] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     5.043] (--) evdev: Video Bus: Found keys
[     5.043] (II) evdev: Video Bus: Configuring as keyboard
[     5.043] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18/event18"
[     5.043] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.043] (**) Option "xkb_rules" "evdev"
[     5.043] (**) Option "xkb_model" "evdev"
[     5.043] (**) Option "xkb_layout" "us"
[     5.043] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[     5.044] (II) No input driver specified, ignoring this device.
[     5.044] (II) This device may have been added with another device file.
[     5.044] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[     5.044] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     5.044] (II) Using input driver 'evdev' for 'Sleep Button'
[     5.044] (**) Sleep Button: always reports core events
[     5.044] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[     5.044] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     5.044] (--) evdev: Sleep Button: Found keys
[     5.044] (II) evdev: Sleep Button: Configuring as keyboard
[     5.044] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4/event4"
[     5.044] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     5.044] (**) Option "xkb_rules" "evdev"
[     5.044] (**) Option "xkb_model" "evdev"
[     5.044] (**) Option "xkb_layout" "us"
[     5.045] (II) config/udev: Adding drm device (/dev/dri/card0)
[     5.045] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[     5.045] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[     5.045] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     5.045] (**) Logitech USB Receiver: always reports core events
[     5.045] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[     5.046] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[     5.046] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[     5.046] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[     5.046] (--) evdev: Logitech USB Receiver: Found relative axes
[     5.046] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[     5.046] (II) evdev: Logitech USB Receiver: Configuring as mouse
[     5.046] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[     5.046] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[     5.046] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     5.046] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input1/event1"
[     5.046] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[     5.046] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[     5.046] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[     5.046] (**) Logitech USB Receiver: (accel) acceleration profile 0
[     5.046] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     5.046] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     5.046] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[     5.046] (II) No input driver specified, ignoring this device.
[     5.046] (II) This device may have been added with another device file.
[     5.047] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[     5.047] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[     5.047] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[     5.047] (**) Logitech USB Receiver: always reports core events
[     5.047] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[     5.047] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[     5.047] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[     5.047] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[     5.047] (--) evdev: Logitech USB Receiver: Found relative axes
[     5.047] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[     5.047] (--) evdev: Logitech USB Receiver: Found absolute axes
[     5.047] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[     5.047] (--) evdev: Logitech USB Receiver: Found keys
[     5.047] (II) evdev: Logitech USB Receiver: Configuring as mouse
[     5.047] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[     5.047] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[     5.047] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[     5.047] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     5.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/input/input2/event2"
[     5.047] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[     5.047] (**) Option "xkb_rules" "evdev"
[     5.047] (**) Option "xkb_model" "evdev"
[     5.047] (**) Option "xkb_layout" "us"
[     5.047] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[     5.047] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[     5.047] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[     5.047] (**) Logitech USB Receiver: (accel) acceleration profile 0
[     5.047] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[     5.047] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[     5.047] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[     5.047] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[     5.047] (II) Using input driver 'evdev' for 'Integrated Camera'
[     5.047] (**) Integrated Camera: always reports core events
[     5.047] (**) evdev: Integrated Camera: Device: "/dev/input/event8"
[     5.047] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2ea
[     5.047] (--) evdev: Integrated Camera: Found keys
[     5.047] (II) evdev: Integrated Camera: Configuring as keyboard
[     5.047] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input8/event8"
[     5.047] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 11)
[     5.047] (**) Option "xkb_rules" "evdev"
[     5.047] (**) Option "xkb_model" "evdev"
[     5.047] (**) Option "xkb_layout" "us"
[     5.047] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[     5.047] (II) No input driver specified, ignoring this device.
[     5.047] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event11)
[     5.048] (II) No input driver specified, ignoring this device.
[     5.048] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event12)
[     5.048] (II) No input driver specified, ignoring this device.
[     5.048] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[     5.048] (II) No input driver specified, ignoring this device.
[     5.048] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event14)
[     5.048] (II) No input driver specified, ignoring this device.
[     5.048] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[     5.048] (II) No input driver specified, ignoring this device.
[     5.048] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event16)
[     5.048] (II) No input driver specified, ignoring this device.
[     5.048] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event17)
[     5.048] (II) No input driver specified, ignoring this device.
[     5.048] (II) This device may have been added with another device file.
[     5.048] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     5.048] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     5.048] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     5.048] (**) AT Translated Set 2 keyboard: always reports core events
[     5.048] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[     5.048] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     5.048] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     5.048] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     5.048] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     5.048] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     5.049] (**) Option "xkb_rules" "evdev"
[     5.049] (**) Option "xkb_model" "evdev"
[     5.049] (**) Option "xkb_layout" "us"
[     5.049] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event9)
[     5.049] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[     5.049] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[     5.049] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[     5.049] (**) TPPS/2 IBM TrackPoint: always reports core events
[     5.049] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event9"
[     5.049] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[     5.049] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[     5.049] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[     5.049] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[     5.049] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[     5.049] (**) Option "Emulate3Buttons" "false"
[     5.049] (**) Option "EmulateWheel" "true"
[     5.049] (**) Option "EmulateWheelButton" "2"
[     5.049] (**) Option "YAxisMapping" "4 5"
[     5.049] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[     5.049] (**) Option "XAxisMapping" "6 7"
[     5.049] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[     5.049] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     5.049] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[     5.049] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[     5.049] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[     5.049] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[     5.049] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[     5.049] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[     5.049] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[     5.049] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[     5.049] (II) No input driver specified, ignoring this device.
[     5.049] (II) This device may have been added with another device file.
[     5.049] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     5.049] (II) No input driver specified, ignoring this device.
[     5.049] (II) This device may have been added with another device file.
[     5.049] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[     5.049] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[     5.049] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[     5.050] (**) ThinkPad Extra Buttons: always reports core events
[     5.050] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event6"
[     5.050] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[     5.050] (--) evdev: ThinkPad Extra Buttons: Found keys
[     5.050] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[     5.050] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event6"
[     5.050] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 14)
[     5.050] (**) Option "xkb_rules" "evdev"
[     5.050] (**) Option "xkb_model" "evdev"
[     5.050] (**) Option "xkb_layout" "us"
[     5.052] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 40533888
[     5.052] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[     5.052] failed to find screen to remove
[     5.052] (II) config/udev: Adding drm device (/dev/dri/card0)
[     5.052] (II) config/udev: removing device Video Bus
[     5.052] (II) evdev: Video Bus: Close
[     5.052] (II) UnloadModule: "evdev"
[     5.052] (II) config/udev: Adding input device Video Bus (/dev/input/event18)
[     5.052] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     5.052] (II) Using input driver 'evdev' for 'Video Bus'
[     5.052] (**) Video Bus: always reports core events
[     5.052] (**) evdev: Video Bus: Device: "/dev/input/event18"
[     5.052] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     5.052] (--) evdev: Video Bus: Found keys
[     5.052] (II) evdev: Video Bus: Configuring as keyboard
[     5.052] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18/event18"
[     5.053] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     5.053] (**) Option "xkb_rules" "evdev"
[     5.053] (**) Option "xkb_model" "evdev"
[     5.053] (**) Option "xkb_layout" "us"
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 0
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 0
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-1 0
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-1 0
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-2 0
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-HDMI-A-3 0
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-2 0
[     5.053] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-DP-3 0
[     5.056] (II) intel(0): EDID vendor "LGD", prod id 728
[     5.056] (II) intel(0): Printing DDC gathered Modelines:
[     5.056] (II) intel(0): Modeline "1366x768"x0.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)
[     5.771] (II) intel(0): EDID vendor "LGD", prod id 728
[     5.771] (II) intel(0): Printing DDC gathered Modelines:
[     5.771] (II) intel(0): Modeline "1366x768"x0.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)
[    14.057] (II) intel(0): EDID vendor "LGD", prod id 728
[    14.057] (II) intel(0): Printing DDC gathered Modelines:
[    14.057] (II) intel(0): Modeline "1366x768"x0.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)
[    14.398] (II) intel(0): EDID vendor "LGD", prod id 728
[    14.398] (II) intel(0): Printing DDC gathered Modelines:
[    14.398] (II) intel(0): Modeline "1366x768"x0.0   75.20  1366 1414 1478 1582  768 772 779 792 +hsync -vsync (47.5 kHz eP)
[    18.058] (II) evdev: Video Bus: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: ThinkPad Extra Buttons: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: TPPS/2 IBM TrackPoint: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: AT Translated Set 2 keyboard: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: Integrated Camera: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: Logitech USB Receiver: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: Logitech USB Receiver: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: Sleep Button: Close
[    18.058] (II) UnloadModule: "evdev"
[    18.058] (II) evdev: Power Button: Close
[    18.059] (II) UnloadModule: "evdev"
[    18.816] Server terminated successfully (0). Closing log file.

Offline

#4 2013-01-17 21:03:55

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

I can't see any problem in the logs. Anyone?
Is there a possibility that this has something to do with the locales?

€: oh, sorry for doublepost. wanted to edit :-/

Last edited by christian1337 (2013-01-17 21:04:43)

Offline

#5 2013-01-21 12:38:32

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 13,804
Website

Re: Login Problems with gnome

There are no relevant errors in your XOrg log, and it exitted without errors.  The problem is either in your display manager or your DE.

Start experimenting to narrow down which is the problem: start a different wm with xinit from a tty.  If that works it will confirm the problem is either the DM or DE.  Then start gnome shell via xinit from a tty to determine which one it is.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#6 2013-01-21 13:35:02

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

thank you for your help smile.

a little bit embarrassing, but actually I don't know how to start a different wm with xinit from a tty hmm
is there a key-combination to abort normal starting because it goes directly to the login screen where I can login with user name and pw?
I did this some time ago but can't remember how and couldn't find information on this.

and when I'm in the shell, i just install another wm with pacman? what then? I'm a little bit overwhelmed with that hmm

Offline

#7 2013-01-21 13:37:11

bernarcher
Forum Fellow
From: Germany
Registered: 2009-02-17
Posts: 2,271

Re: Login Problems with gnome

Moving to Newbie Corner.


To know or not to know ...
... the questions remain forever.

Offline

#8 2013-01-21 13:52:25

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 13,804
Website

Re: Login Problems with gnome

You can follow the beginners guide on how to install twm to test X.  You may need to switch to a tty and disable/stop your display manager with `systemctl stop <DMname>`.  More information on that last part can be found in the wiki page for whatever display manager you are using - I have never used any, so I can't give better info than that.

EDIT: bear in mind someone with experience with gnome-shell may be able to identify the problem much eaiser - I'm just going through a step-by-step process of elimination to narrow it down.  Gnome's "Oh no..." messages are ridiculously useless, so I'm hoping you can replicate the problem in a context that will give more useful error output.

Last edited by Trilby (2013-01-21 13:54:21)


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#9 2013-01-27 15:33:00

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

Ok now I've installed awesome and started it.. and it works. what does it mean? that my gnome is broken?

edit: how can i fix this?)

Last edited by christian1337 (2013-01-27 15:39:17)

Offline

#10 2013-01-27 17:34:01

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 13,804
Website

Re: Login Problems with gnome

If you like awesome, you can always stick with it - but my goal is not to find replacements, rather to just test to pinpoint the problem.

AwesomeWM running successfully just means we can rule out any XOrg or X configuration problems.  This leaves two suspects: gdm or gnome itself.

Did you start awesome from a tty with startx/xinit?  If so, two follow up tests to do: 1) try to start gnome from xinitrc, 2) try to start awesome from gdm.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#11 2013-01-27 18:47:13

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

Yes I've switched to a tty and started awesome with startx (previously I put in "exec awesome" to xinitrc of course).
Your solution 1 to start gnome from xinitrc is like the same right? I've done this already by putting some commands for gnome to xinitrc and did startx then. same problem..

when system boots and I can type password.. I can choose now between awesome and gnome. When I choose awesome, it logs normally in but when I choose gnome, it fails again.

€: also awesome-gnome works..

Last edited by christian1337 (2013-01-27 18:59:27)

Offline

#12 2013-01-27 20:16:57

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 13,804
Website

Re: Login Problems with gnome

This seems to clearly implicate gnome-shell as the problem.  When you did 1) (started gnome from a tty with startx) it failed and returned you to the tty, right?  Were there any errors listed in the output there?


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#13 2013-01-27 20:25:43

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

when I started gnome from tty using startx I doesn't go directly back to tty.. it says like the "oh no.."-bullshiterrormessage and a button to "login again".. and no there were no errors or any other output :-/

Offline

#14 2013-01-27 20:33:51

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 13,804
Website

Re: Login Problems with gnome

here is another thread with an alleged solution.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#15 2013-01-27 20:48:44

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

awesome, this solution works. now I only have to work out, which of the applications crash at startup.. is there an easier way to find out which one crashes than activate one and reboot?

Offline

#16 2013-01-27 20:58:19

Trilby
Forum Moderator
From: Massachusetts, USA
Registered: 2011-11-29
Posts: 13,804
Website

Re: Login Problems with gnome

Perhaps, but I don't know it as I don't use that at all.

But if you post the list of which applications are there I or someone else here might spot one of the "usual suspects" that may be causing a problem.


InterrobangSlider
• How's my coding? See this page.
• How's my moderating? Feel free to email any concerns, complaints, or objections.

Offline

#17 2013-01-27 21:00:35

christian1337
Member
From: Berlin, Germany
Registered: 2012-10-24
Posts: 26

Re: Login Problems with gnome

there was hint in the thread => "In my case i think that Gconf to Dconf app."

In my case it was also this... :-/

Offline

#18 2013-03-26 19:29:00

trann
Member
Registered: 2009-10-29
Posts: 32

Re: Login Problems with gnome

Just in case anyone googles and hits this thread, the solution is:

1. Start a different window manager like twm
2. In a terminal, type gnome-session-properties
3. Scroll through the list until you see an entry titled "GSettings Data Conversion"
4. Uncheck the box to disable this program from starting upon Gnome launch
5. Reboot

I was getting the behavior described above 1-3 times after a reboot when I tried to log in.  Specifically, I would reboot and the next 1-3 login attempts would generate the "Oh No..." message and kick me back out to GDM. Eventually Gnome would start successfully if i kept logging in.  After disabling the startup of GSettings Data Conversion I am now in good shape.

Offline

Board footer

Powered by FluxBB