You are not logged in.

#1 2013-01-22 16:08:25

irrlicht
Member
Registered: 2010-12-06
Posts: 107

Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

Hello.

I'm using GeForce 8800 GT (rev a2) which is driven by nouveau driver. Since last update the hibernation works not correctly. The graphic card fan stay on 100% speed after turning the pc from the sleep state. Is there any workaround? I won't use proprietary driver. Thank you!


Update:

Same problem on 3.7.4 kernel.

Last edited by irrlicht (2013-01-24 14:38:24)


Everything less than immortality is a complete waste of time!

Offline

#2 2013-01-22 20:31:59

reasterling
Member
Registered: 2012-09-01
Posts: 8

Re: Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

I can confirm this same problem with intel 945 graphics.  Upon resume system fan runs at 100%.  I am not shure if this is specific to the type of graphics hardware.  This does not happen upon bootup, only upon resume.

uname -a
Linux cheap 3.7.3-1-ARCH #1 SMP PREEMPT Thu Jan 17 18:52:30 CET 2013 x86_64 GNU/Linux

Offline

#3 2013-01-23 01:35:51

reasterling
Member
Registered: 2012-09-01
Posts: 8

Re: Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

I have found what I believe to be the problem, but do not know how to fix it.

before suspend:

cheap% sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +46.0°C  (crit = +256.0°C)
temp2:        +50.0°C  (crit = +105.0°C)
temp3:        +45.0°C  (crit = +105.0°C)
temp4:        +32.0°C  (crit = +105.0°C)
temp5:         +0.0°C  (crit = +110.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +55.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:       +55.0°C  (high = +100.0°C, crit = +100.0°C)

After suspend:

cheap% sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +55.0°C  (crit = +256.0°C)
temp2:        +47.0°C  (crit = +105.0°C)
temp3:        +45.0°C  (crit = +105.0°C)
temp4:        +32.0°C  (crit = +105.0°C)
temp5:        +90.0°C  (crit = +110.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +51.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:       +52.0°C  (high = +100.0°C, crit = +100.0°C)

I am confident that temp5 is not 90 degrees.

Offline

#4 2013-01-27 16:37:32

synthetic
Member
Registered: 2012-06-20
Posts: 16

Re: Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

I can confirm this with nouveau driver 1.0.6-1 and Linux 3.7.4-1.
Hardware is nVidia GTX 275.

Offline

#5 2013-01-27 21:33:26

marc-andre
Member
From: Perpignan, France
Registered: 2013-01-11
Posts: 4
Website

Re: Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

I also can confirm this issue, nouveau 1.0.6-1 and linux 3.7.4-1; hardware is nVidia Quattro FX 580 (nv50).

Offline

#6 2013-02-09 19:17:21

crobe2
Member
Registered: 2011-08-09
Posts: 27

Re: Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

Hm, I am having bad suspend/resume stability with 3.7.5 and the NVidia binary driver on a Dell XPS M1330 with Geforce 8400M GS.
Sometimes only one CPU comes back up, sometimes hibernate hangs.

Offline

#7 2013-03-18 22:12:15

synthetic
Member
Registered: 2012-06-20
Posts: 16

Re: Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

Following reasterling's post, I installed lm_sensors, ran

# sensors-detect

after which running

sensors

gives:

nouveau-pci-0500
Adapter: PCI adapter
temp1:         +0.0°C  (high = +95.0°C, crit = +105.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +40.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:       +39.0°C  (high = +80.0°C, crit = +100.0°C)
Core 2:       +41.0°C  (high = +80.0°C, crit = +100.0°C)
Core 3:       +37.0°C  (high = +80.0°C, crit = +100.0°C)

it8720-isa-0a10
Adapter: ISA adapter
in0:          +0.93 V  (min =  +0.00 V, max =  +4.08 V)
in1:          +0.05 V  (min =  +0.00 V, max =  +4.08 V)
in2:          +3.18 V  (min =  +0.00 V, max =  +4.08 V)
+5V:          +2.96 V  (min =  +0.00 V, max =  +4.08 V)
in4:          +2.99 V  (min =  +0.00 V, max =  +4.08 V)
in5:          +2.96 V  (min =  +0.00 V, max =  +4.08 V)
in6:          +2.18 V  (min =  +0.00 V, max =  +4.08 V)
5VSB:         +2.86 V  (min =  +0.00 V, max =  +4.08 V)
Vbat:         +3.28 V  
fan1:         914 RPM  (min =    0 RPM)
fan2:           0 RPM  (min =    0 RPM)
fan3:        1036 RPM  (min =    0 RPM)
fan4:        112500 RPM  (min =   -1 RPM)
fan5:        112500 RPM  (min =   -1 RPM)
temp1:        +41.0°C  (low  =  +0.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +40.0°C  (low  =  +0.0°C, high = +127.0°C)  sensor = thermistor
temp3:       +127.0°C  (low  =  +0.0°C, high = +127.0°C)  sensor = thermistor
cpu0_vid:    +1.225 V
intrusion0:  ALARM

For me the crazy temperature seems to be temp3 on the isa adapter, the temperature is set to the maximum of 127°C. The fan4 and fan5 revolutions are also non-realistic.
Could anyone else resolve this?
For the record, I am now on nouveau 1.0.6-2 and Linux 3.8.3-2.

Offline

#8 2013-03-20 16:27:44

Yagi858
Member
Registered: 2008-12-17
Posts: 31

Re: Nouveau hibernate problem afrer update to kernel 3.7.3 & 3.7.4

I confirm this issue with nouveau-dri 9.1-3 + linux 3.8.3-2. The issue is not present with linux-lts kernel. Not present with proprietary driver both on 3.8.3 and lts kernel.

Offline

Board footer

Powered by FluxBB