You are not logged in.

#1 2013-02-04 02:23:19

MorningWood
Member
Registered: 2008-06-06
Posts: 68

rm_init_adapter(0) failed errors cause xserver not to launch

Hi guys,
I'm having a problem with my Xorg configuration at the moment and I am tired of messing with it so I figured I would ask for some help after not being able to track down a fix on my own.

As of this moment I am running a stock xorg.conf file provided by Xorg :0 -configure:

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc/"
	FontPath     "/usr/share/fonts/TTF/"
	FontPath     "/usr/share/fonts/OTF/"
	FontPath     "/usr/share/fonts/Type1/"
	FontPath     "/usr/share/fonts/100dpi/"
	FontPath     "/usr/share/fonts/75dpi/"
EndSection

Section "Module"
	Load  "vnc"
	Load  "glx"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "evdev"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "evdev"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "nvidia"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

The problem is that with this configuration no screens are found.  I had tracked down a fix for this earlier in the day but now managed to forget the exact solution after hours of messing around.  I remember that it entailed removing the various screen subsections, removing BUSID from under Device and adding an option under Device but I cannot for the life of me remember which option that was.
Anyway,  this tweaked configuration allowed for me to see my login screen but left me without the ability to use my keyboard or usb mouse.  At this point I'm stumped and frustrated so I turn to you guys for some help.

Here is my Xorg.0.log:

[    13.516] 
X.Org X Server 1.13.2
Release Date: 2013-01-24
[    13.516] X Protocol Version 11, Revision 0
[    13.516] Build Operating System: Linux 3.7.4-1-ARCH x86_64 
[    13.516] Current Operating System: Linux Archy 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64
[    13.516] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=66c691c5-3c3a-487b-9322-5b8328cb4279 ro quiet
[    13.516] Build Date: 25 January 2013  09:33:50AM
[    13.516]  
[    13.516] Current version of pixman: 0.28.2
[    13.516] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.516] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.517] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb  3 15:31:58 2013
[    13.590] (==) Using config file: "/etc/X11/xorg.conf"
[    13.590] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.610] (==) ServerLayout "X.org Configured"
[    13.610] (**) |-->Screen "Screen0" (0)
[    13.610] (**) |   |-->Monitor "Monitor0"
[    13.634] (**) |   |-->Device "Card0"
[    13.634] (**) |-->Input Device "Mouse0"
[    13.634] (**) |-->Input Device "Keyboard0"
[    13.634] (==) Automatically adding devices
[    13.634] (==) Automatically enabling devices
[    13.634] (==) Automatically adding GPU devices
[    13.993] (**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    13.993] (**) ModulePath set to "/usr/lib/xorg/modules"
[    13.993] (II) Loader magic: 0x7fcc40
[    13.993] (II) Module ABI versions:
[    13.993] 	X.Org ANSI C Emulation: 0.4
[    13.993] 	X.Org Video Driver: 13.1
[    13.993] 	X.Org XInput driver : 18.0
[    13.993] 	X.Org Server Extension : 7.0
[    13.995] (--) PCI:*(0:1:0:0) 10de:0427:103c:30cc rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[    13.996] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    14.015] Initializing built-in extension Generic Event Extension
[    14.015] Initializing built-in extension SHAPE
[    14.015] Initializing built-in extension MIT-SHM
[    14.015] Initializing built-in extension XInputExtension
[    14.015] Initializing built-in extension XTEST
[    14.015] Initializing built-in extension BIG-REQUESTS
[    14.015] Initializing built-in extension SYNC
[    14.015] Initializing built-in extension XKEYBOARD
[    14.015] Initializing built-in extension XC-MISC
[    14.015] Initializing built-in extension SECURITY
[    14.015] Initializing built-in extension XINERAMA
[    14.015] Initializing built-in extension XFIXES
[    14.015] Initializing built-in extension RENDER
[    14.015] Initializing built-in extension RANDR
[    14.015] Initializing built-in extension COMPOSITE
[    14.015] Initializing built-in extension DAMAGE
[    14.015] Initializing built-in extension MIT-SCREEN-SAVER
[    14.015] Initializing built-in extension DOUBLE-BUFFER
[    14.015] Initializing built-in extension RECORD
[    14.015] Initializing built-in extension DPMS
[    14.015] Initializing built-in extension X-Resource
[    14.015] Initializing built-in extension XVideo
[    14.015] Initializing built-in extension XVideo-MotionCompensation
[    14.015] Initializing built-in extension XFree86-VidModeExtension
[    14.015] Initializing built-in extension XFree86-DGA
[    14.015] Initializing built-in extension XFree86-DRI
[    14.016] Initializing built-in extension DRI2
[    14.016] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    14.016] (II) LoadModule: "vnc"
[    14.265] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[    14.614] (II) Module vnc: vendor="Constantin Kaplinsky"
[    14.614] 	compiled for 1.13.1, module version = 1.0.0
[    14.614] 	Module class: X.Org Server Extension
[    14.614] 	ABI class: X.Org Server Extension, version 7.0
[    14.614] Loading extension VNC
[    14.614] (II) LoadModule: "glx"
[    14.614] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.076] (II) Module glx: vendor="NVIDIA Corporation"
[    17.082] 	compiled for 4.0.2, module version = 1.0.0
[    17.082] 	Module class: X.Org Server Extension
[    17.082] (II) NVIDIA GLX Module  313.18  Wed Jan  9 15:34:35 PST 2013
[    17.097] Loading extension GLX
[    17.097] (II) LoadModule: "nvidia"
[    17.097] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    17.206] (II) Module nvidia: vendor="NVIDIA Corporation"
[    17.206] 	compiled for 4.0.2, module version = 1.0.0
[    17.206] 	Module class: X.Org Video Driver
[    17.234] (II) LoadModule: "evdev"
[    17.234] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.261] (II) Module evdev: vendor="X.Org Foundation"
[    17.261] 	compiled for 1.13.0, module version = 2.7.3
[    17.261] 	Module class: X.Org XInput Driver
[    17.261] 	ABI class: X.Org XInput driver, version 18.0
[    17.261] (II) NVIDIA dlloader X Driver  313.18  Wed Jan  9 15:15:26 PST 2013
[    17.261] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    17.261] (++) using VT number 7

[    17.310] (II) Loading sub module "wfb"
[    17.310] (II) LoadModule: "wfb"
[    17.310] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    17.335] (II) Module wfb: vendor="X.Org Foundation"
[    17.335] 	compiled for 1.13.2, module version = 1.0.0
[    17.335] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.335] (II) Loading sub module "ramdac"
[    17.335] (II) LoadModule: "ramdac"
[    17.335] (II) Module "ramdac" already built-in
[    17.475] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    17.475] (==) NVIDIA(0): RGB weight 888
[    17.475] (==) NVIDIA(0): Default visual is TrueColor
[    17.475] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    17.583] (**) NVIDIA(0): Enabling 2D acceleration
[    17.820] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[    17.820] (EE) NVIDIA(0):     check your system's kernel log for additional error
[    17.820] (EE) NVIDIA(0):     messages and refer to Chapter 8: Common Problems in the
[    17.820] (EE) NVIDIA(0):     README for additional information.
[    17.820] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[    17.820] (EE) NVIDIA(0): Failing initialization of X screen 0
[    17.820] (II) UnloadModule: "nvidia"
[    17.820] (II) UnloadSubModule: "wfb"
[    17.820] (EE) Screen(s) found, but none have a usable configuration.
[    17.820] 
Fatal server error:
[    17.820] no screens found
[    17.820] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    17.820] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    17.820] (EE) 
[    18.045] Server terminated with error (1). Closing log file.

I have tried both of the Nvidia and Xorg configuration tools and neither one gives me a configuration which works properly.  Additionally, I had to configure my Synaptics touchpad to work as that did not work previously either due to the fact that there was nothing in /etc/X11/xorg.conf.d/
Don't know if it matters but the card is an Nvidia 8400M GS

I don't know what happened with my configuration but I'd love to be able to get this fixed.
Thank you!

Last edited by MorningWood (2013-02-16 15:13:36)

Offline

#2 2013-02-04 03:02:34

Gusar
Member
Registered: 2009-08-25
Posts: 3,431

Re: rm_init_adapter(0) failed errors cause xserver not to launch

You don't need *any* configuration for nvidia. All you need is the evdev and synaptics files. If you deleted them, reinstall the packages that ship them, which would be xorg-server and xf86-input-synaptics.

Offline

#3 2013-02-04 03:04:19

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

Gusar wrote:

You don't need *any* configuration for nvidia. All you need is the evdev and synaptics files. If you deleted them, reinstall the packages that ship them, which would be xorg-server and xf86-input-synaptics.

Thanks for the reply Gusar, I'm going to try that. I tried reinstalling xf86-input-synaptics and xf86-input-evdev but haven't attempted xorg-server yet.  Will update with results.

E: wow, and it was that simple! It didn't dawn on me to reinstall xorg-server.  Thank you so much.

Last edited by MorningWood (2013-02-04 03:11:39)

Offline

#4 2013-02-04 21:57:50

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

It seems that I spoke too soon.  The configuration was working fine last night and today but then it reminded me as to the reason I started digging into the xorg configuration in the first place.  The graphics started becoming all wonky and jittery from time to time and the computer slowed down immensely.  It would take upwards of a minute to switch between windows.  I didn't have a chance to check cpu or memory usage but after I had rebooted I could no longer boot into kde.

I have deleted my xorg.conf file and was just running the standard configuration.

Here is my Xorg.0.log:

[    12.623] 
X.Org X Server 1.13.2
Release Date: 2013-01-24
[    12.623] X Protocol Version 11, Revision 0
[    12.623] Build Operating System: Linux 3.7.4-1-ARCH x86_64 
[    12.623] Current Operating System: Linux Archy 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64
[    12.623] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=66c691c5-3c3a-487b-9322-5b8328cb4279 ro quiet
[    12.623] Build Date: 25 January 2013  09:33:50AM
[    12.623]  
[    12.623] Current version of pixman: 0.28.2
[    12.623] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    12.623] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    12.624] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb  4 11:38:07 2013
[    12.759] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.055] (==) No Layout section.  Using the first Screen section.
[    13.055] (==) No screen section available. Using defaults.
[    13.055] (**) |-->Screen "Default Screen Section" (0)
[    13.055] (**) |   |-->Monitor "<default monitor>"
[    13.056] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    13.056] (==) Automatically adding devices
[    13.056] (==) Automatically enabling devices
[    13.056] (==) Automatically adding GPU devices
[    13.249] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    13.249] (==) ModulePath set to "/usr/lib/xorg/modules"
[    13.249] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    13.249] (II) Loader magic: 0x7fcc40
[    13.249] (II) Module ABI versions:
[    13.249] 	X.Org ANSI C Emulation: 0.4
[    13.249] 	X.Org Video Driver: 13.1
[    13.249] 	X.Org XInput driver : 18.0
[    13.249] 	X.Org Server Extension : 7.0
[    13.252] (--) PCI:*(0:1:0:0) 10de:0427:103c:30cc rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[    13.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    13.259] Initializing built-in extension Generic Event Extension
[    13.259] Initializing built-in extension SHAPE
[    13.259] Initializing built-in extension MIT-SHM
[    13.259] Initializing built-in extension XInputExtension
[    13.259] Initializing built-in extension XTEST
[    13.259] Initializing built-in extension BIG-REQUESTS
[    13.259] Initializing built-in extension SYNC
[    13.259] Initializing built-in extension XKEYBOARD
[    13.259] Initializing built-in extension XC-MISC
[    13.259] Initializing built-in extension SECURITY
[    13.259] Initializing built-in extension XINERAMA
[    13.259] Initializing built-in extension XFIXES
[    13.259] Initializing built-in extension RENDER
[    13.259] Initializing built-in extension RANDR
[    13.259] Initializing built-in extension COMPOSITE
[    13.259] Initializing built-in extension DAMAGE
[    13.259] Initializing built-in extension MIT-SCREEN-SAVER
[    13.259] Initializing built-in extension DOUBLE-BUFFER
[    13.259] Initializing built-in extension RECORD
[    13.259] Initializing built-in extension DPMS
[    13.259] Initializing built-in extension X-Resource
[    13.259] Initializing built-in extension XVideo
[    13.259] Initializing built-in extension XVideo-MotionCompensation
[    13.259] Initializing built-in extension XFree86-VidModeExtension
[    13.259] Initializing built-in extension XFree86-DGA
[    13.259] Initializing built-in extension XFree86-DRI
[    13.259] Initializing built-in extension DRI2
[    13.259] (II) LoadModule: "glx"
[    13.822] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.643] (II) Module glx: vendor="NVIDIA Corporation"
[    16.643] 	compiled for 4.0.2, module version = 1.0.0
[    16.643] 	Module class: X.Org Server Extension
[    16.643] (II) NVIDIA GLX Module  313.18  Wed Jan  9 15:34:35 PST 2013
[    17.689] Loading extension GLX
[    17.689] (==) Matched nouveau as autoconfigured driver 0
[    17.689] (==) Matched nvidia as autoconfigured driver 1
[    17.689] (==) Matched nv as autoconfigured driver 2
[    17.689] (==) Matched vesa as autoconfigured driver 3
[    17.689] (==) Matched modesetting as autoconfigured driver 4
[    17.689] (==) Matched fbdev as autoconfigured driver 5
[    17.689] (==) Assigned the driver to the xf86ConfigLayout
[    17.689] (II) LoadModule: "nouveau"
[    17.689] (WW) Warning, couldn't open module nouveau
[    17.689] (II) UnloadModule: "nouveau"
[    17.689] (II) Unloading nouveau
[    17.689] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    17.689] (II) LoadModule: "nvidia"
[    17.689] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    18.084] (II) Module nvidia: vendor="NVIDIA Corporation"
[    18.084] 	compiled for 4.0.2, module version = 1.0.0
[    18.084] 	Module class: X.Org Video Driver
[    18.116] (II) LoadModule: "nv"
[    18.116] (WW) Warning, couldn't open module nv
[    18.116] (II) UnloadModule: "nv"
[    18.116] (II) Unloading nv
[    18.116] (EE) Failed to load module "nv" (module does not exist, 0)
[    18.116] (II) LoadModule: "vesa"
[    18.116] (WW) Warning, couldn't open module vesa
[    18.116] (II) UnloadModule: "vesa"
[    18.116] (II) Unloading vesa
[    18.116] (EE) Failed to load module "vesa" (module does not exist, 0)
[    18.116] (II) LoadModule: "modesetting"
[    18.117] (WW) Warning, couldn't open module modesetting
[    18.117] (II) UnloadModule: "modesetting"
[    18.117] (II) Unloading modesetting
[    18.117] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    18.117] (II) LoadModule: "fbdev"
[    18.117] (WW) Warning, couldn't open module fbdev
[    18.117] (II) UnloadModule: "fbdev"
[    18.117] (II) Unloading fbdev
[    18.117] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    18.117] (II) NVIDIA dlloader X Driver  313.18  Wed Jan  9 15:15:26 PST 2013
[    18.117] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    18.118] (++) using VT number 7

[    18.257] (II) Loading sub module "wfb"
[    18.257] (II) LoadModule: "wfb"
[    18.257] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    18.318] (II) Module wfb: vendor="X.Org Foundation"
[    18.318] 	compiled for 1.13.2, module version = 1.0.0
[    18.318] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    18.318] (II) Loading sub module "ramdac"
[    18.318] (II) LoadModule: "ramdac"
[    18.318] (II) Module "ramdac" already built-in
[    18.343] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.343] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    18.343] (==) NVIDIA(0): RGB weight 888
[    18.343] (==) NVIDIA(0): Default visual is TrueColor
[    18.343] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    18.350] (**) NVIDIA(0): Enabling 2D acceleration
[    18.703] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.  Please
[    18.703] (EE) NVIDIA(0):     check your system's kernel log for additional error
[    18.703] (EE) NVIDIA(0):     messages and refer to Chapter 8: Common Problems in the
[    18.703] (EE) NVIDIA(0):     README for additional information.
[    18.703] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[    18.703] (EE) NVIDIA(0): Failing initialization of X screen 0
[    18.703] (II) UnloadModule: "nvidia"
[    18.703] (II) UnloadSubModule: "wfb"
[    18.703] (EE) Screen(s) found, but none have a usable configuration.
[    18.703] 
Fatal server error:
[    18.703] no screens found
[    18.703] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    18.703] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    18.703] (EE) 
[    18.848] Server terminated with error (1). Closing log file.

and my dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.7.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=66c691c5-3c3a-487b-9322-5b8328cb4279 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfecffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfed0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv6700 Notebook PC    /30D2, BIOS F.58      06/16/2008
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D7FFF write-protect
[    0.000000]   D8000-DBFFF uncachable
[    0.000000]   DC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f8520-0x000f852f] mapped at [ffff8800000f8520]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xbfecffff]
[    0.000000]  [mem 0x00000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbfecffff] page 4k
[    0.000000] kernel direct mapping tables up to 0xbfecffff @ [mem 0x1fffb000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbfece000-0xbfecffff]
[    0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
[    0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 00000000bfed5b59 0007C (v01 HPQOEM SLIC-MPC 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP     30CC     06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP     30D2     06040000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000bfee2fc0 00040
[    0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP     30D2     06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP     30D2     06040000 LOHR 0000005A)
[    0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP     30CC     06040000 PTL  00000003)
[    0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP     30D2     06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP     30D2     06040000  LTP 00000001)
[    0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP     30D2     00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bfed6161 0025F (v01  HP    30D2     00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bfed60bb 000A6 (v01  HP    30D2     00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000bfed5bd5 004E6 (v01  HP     30D2    00003000 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffc000-0x13fffffff]
[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbfecffff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000] On node 0 totalpages: 1048159
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 765712 pages, LIFO batch:31
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 258048 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee3000
[    0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[    0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84608 r8192 d21888 u1048576
[    0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027673
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=66c691c5-3c3a-487b-9322-5b8328cb4279 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4046348k/5242880k available (4883k kernel code, 1050244k absent, 146288k reserved, 4030k data, 812k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:4352 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.123 MHz processor
[    0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.50 BogoMIPS (lpj=6650410)
[    0.003342] pid_max: default: 32768 minimum: 301
[    0.003383] Security Framework initialized
[    0.003397] AppArmor: AppArmor disabled by boot time parameter
[    0.003781] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006873] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.007949] Mount-cache hash table entries: 256
[    0.008239] Initializing cgroup subsys cpuacct
[    0.008244] Initializing cgroup subsys memory
[    0.008256] Initializing cgroup subsys devices
[    0.008258] Initializing cgroup subsys freezer
[    0.008260] Initializing cgroup subsys net_cls
[    0.008262] Initializing cgroup subsys blkio
[    0.008295] CPU: Physical Processor ID: 0
[    0.008297] CPU: Processor Core ID: 0
[    0.008299] mce: CPU supports 6 MCE banks
[    0.008308] CPU0: Thermal monitoring enabled (TM2)
[    0.008313] process: using mwait in idle threads
[    0.008319] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[    0.008423] Freeing SMP alternatives: 16k freed
[    0.009712] ACPI: Core revision 20120913
[    0.016678] ftrace: allocating 18793 entries in 74 pages
[    0.023834] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.056930] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz (fam: 06, model: 0f, stepping: 0d)
[    0.059999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.059999] perf_event_intel: PEBS disabled due to CPU errata
[    0.059999] ... version:                2
[    0.059999] ... bit width:              40
[    0.059999] ... generic registers:      2
[    0.059999] ... value mask:             000000ffffffffff
[    0.059999] ... max period:             000000007fffffff
[    0.059999] ... fixed-purpose events:   3
[    0.059999] ... event mask:             0000000700000003
[    0.083390] smpboot: Booting Node   0, Processors  #1 OK
[    0.096600] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.096616] Brought up 2 CPUs
[    0.096620] smpboot: Total of 2 processors activated (7983.01 BogoMIPS)
[    0.097904] devtmpfs: initialized
[    0.098155] PM: Registering ACPI NVS region [mem 0xbfed0000-0xbfee2fff] (77824 bytes)
[    0.098155] RTC time: 16:46:06, date: 02/04/13
[    0.098155] NET: Registered protocol family 16
[    0.098155] ACPI: bus type pci registered
[    0.098155] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.098155] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.124828] PCI: Using configuration type 1 for base access
[    0.126692] bio: create slab <bio-0> at 0
[    0.126718] ACPI: Added _OSI(Module Device)
[    0.126718] ACPI: Added _OSI(Processor Device)
[    0.126718] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.126718] ACPI: Added _OSI(Processor Aggregator Device)
[    0.127007] ACPI: EC: Look up EC in DSDT
[    0.129322] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.130100] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20120913/psargs-359)
[    0.130107] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880139a35a78), AE_NOT_FOUND (20120913/psparse-536)
[    0.130355] ACPI: SSDT 00000000bfed6a1d 0027A (v01  HP    30D2     00003000 INTL 20061109)
[    0.130692] ACPI: Dynamic OEM Table Load:
[    0.130696] ACPI: SSDT           (null) 0027A (v01  HP    30D2     00003000 INTL 20061109)
[    0.130816] ACPI: SSDT 00000000bfed63c0 005D8 (v01  HP    30D2     00003001 INTL 20061109)
[    0.131134] ACPI: Dynamic OEM Table Load:
[    0.131137] ACPI: SSDT           (null) 005D8 (v01  HP    30D2     00003001 INTL 20061109)
[    0.131346] ACPI: SSDT 00000000bfed6c97 000C8 (v01  HP    30D2     00003000 INTL 20061109)
[    0.131673] ACPI: Dynamic OEM Table Load:
[    0.131677] ACPI: SSDT           (null) 000C8 (v01  HP    30D2     00003000 INTL 20061109)
[    0.131758] ACPI: SSDT 00000000bfed6998 00085 (v01  HP    30D2     00003000 INTL 20061109)
[    0.132079] ACPI: Dynamic OEM Table Load:
[    0.132082] ACPI: SSDT           (null) 00085 (v01  HP    30D2     00003000 INTL 20061109)
[    0.132355] ACPI: Interpreter enabled
[    0.132359] ACPI: (supports S0 S3 S4 S5)
[    0.132377] ACPI: Using IOAPIC for interrupt routing
[    0.140679] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.140849] ACPI: No dock devices found.
[    0.140854] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.141160] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.143628] PCI host bridge to bus 0000:00
[    0.143632] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.143635] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.143638] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.143641] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.143643] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.143646] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.143648] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.143651] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[    0.143654] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.143666] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
[    0.143721] pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400
[    0.143771] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.143831] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.143893] pci 0000:00:1a.0: reg 20: [io  0x1800-0x181f]
[    0.143941] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.144003] pci 0000:00:1a.1: reg 20: [io  0x1820-0x183f]
[    0.144065] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.144092] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
[    0.144211] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.144247] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.144272] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
[    0.144384] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.144420] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.144538] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.144576] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
[    0.144692] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.144734] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
[    0.144852] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.144886] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.144947] pci 0000:00:1d.0: reg 20: [io  0x1840-0x185f]
[    0.144995] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.145057] pci 0000:00:1d.1: reg 20: [io  0x1860-0x187f]
[    0.145103] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.145165] pci 0000:00:1d.2: reg 20: [io  0x1880-0x189f]
[    0.145226] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.145252] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
[    0.145371] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.145400] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.145504] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
[    0.145616] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.145623] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.145632] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[    0.145693] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
[    0.145712] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.145725] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.145739] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.145753] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.145767] pci 0000:00:1f.1: reg 20: [io  0x18a0-0x18af]
[    0.145828] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
[    0.145856] pci 0000:00:1f.2: reg 10: [io  0x18d8-0x18df]
[    0.145870] pci 0000:00:1f.2: reg 14: [io  0x18cc-0x18cf]
[    0.145883] pci 0000:00:1f.2: reg 18: [io  0x18d0-0x18d7]
[    0.145896] pci 0000:00:1f.2: reg 1c: [io  0x18c8-0x18cb]
[    0.145909] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
[    0.145923] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
[    0.145995] pci 0000:00:1f.2: PME# supported from D3hot
[    0.146022] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.146040] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[    0.146085] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
[    0.146185] pci 0000:01:00.0: [10de:0427] type 00 class 0x030000
[    0.146206] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[    0.146229] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.146251] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[    0.146266] pci 0000:01:00.0: reg 24: [io  0x2000-0x207f]
[    0.146281] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.146390] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.146393] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.146397] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.146403] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.146573] pci 0000:02:00.0: [8086:4222] type 00 class 0x028000
[    0.146630] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff]
[    0.147053] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.147134] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.147172] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.147178] pci 0000:00:1c.0:   bridge window [io  0x4000-0x7fff]
[    0.147184] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.147192] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.147258] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
[    0.147263] pci 0000:00:1c.1:   bridge window [io  0x8000-0xbfff]
[    0.147269] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.147278] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.147376] pci 0000:08:00.0: [10ec:8136] type 00 class 0x020000
[    0.147401] pci 0000:08:00.0: reg 10: [io  0xc000-0xc0ff]
[    0.147444] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit]
[    0.147494] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.147605] pci 0000:08:00.0: supports D1 D2
[    0.147608] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.147645] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.147659] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    0.147664] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.147670] pci 0000:00:1c.5:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.147740] pci 0000:09:09.0: [1180:0832] type 00 class 0x0c0010
[    0.147756] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.147759] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
[    0.147776] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff]
[    0.147881] pci 0000:09:09.0: supports D1 D2
[    0.147884] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.147909] pci 0000:09:09.1: [1180:0822] type 00 class 0x080500
[    0.147933] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff]
[    0.148038] pci 0000:09:09.1: supports D1 D2
[    0.148041] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.148066] pci 0000:09:09.2: [1180:0592] type 00 class 0x088000
[    0.148090] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff]
[    0.148195] pci 0000:09:09.2: supports D1 D2
[    0.148197] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.148223] pci 0000:09:09.3: [1180:0852] type 00 class 0x088000
[    0.148247] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff]
[    0.148352] pci 0000:09:09.3: supports D1 D2
[    0.148355] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.148412] pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
[    0.148421] pci 0000:00:1e.0:   bridge window [mem 0xf8100000-0xf81fffff]
[    0.148430] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.148432] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.148435] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.148438] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.148440] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.148443] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.148449] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.148451] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.148485] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.148615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.148666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.148709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.148747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.148808] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.148852]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.148855]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.153317] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.153374] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.153424] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.153473] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.153522] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.153570] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.153618] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.153666] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.153745] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.153745] vgaarb: loaded
[    0.153745] vgaarb: bridge control possible 0000:01:00.0
[    0.153745] PCI: Using ACPI for IRQ routing
[    0.165631] PCI: pci_cache_line_size set to 64 bytes
[    0.165742] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.165744] e820: reserve RAM buffer [mem 0xbfed0000-0xbfffffff]
[    0.165868] NetLabel: Initializing
[    0.165870] NetLabel:  domain hash size = 128
[    0.165871] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.165886] NetLabel:  unlabeled traffic allowed by default
[    0.165900] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.165905] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.165911] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.176679] Switching to clocksource hpet
[    0.183990] pnp: PnP ACPI init
[    0.184015] ACPI: bus type pnp registered
[    0.184748] pnp 00:00: [bus 00-ff]
[    0.184752] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.184755] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.184758] pnp 00:00: [io  0x0d00-0xffff window]
[    0.184761] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.184764] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.184766] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.184769] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.184771] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.184774] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.184777] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.184779] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.184782] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.184784] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.184787] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.184789] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.184792] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.184794] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.184797] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.184800] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[    0.184802] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    0.184867] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.184945] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.184948] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.184950] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.184953] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.184955] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.184957] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[    0.184960] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.184962] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[    0.185029] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.185033] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.185036] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.185039] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.185042] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.185045] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.185048] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.185051] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.185056] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185266] pnp 00:02: [io  0x0000-0x001f]
[    0.185269] pnp 00:02: [io  0x0081-0x0091]
[    0.185271] pnp 00:02: [io  0x0093-0x009f]
[    0.185274] pnp 00:02: [io  0x00c0-0x00df]
[    0.185276] pnp 00:02: [dma 4]
[    0.185313] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.185323] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.185355] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.185427] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.185478] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.185483] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.185495] pnp 00:05: [io  0x00f0]
[    0.185508] pnp 00:05: [irq 13]
[    0.185542] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.185554] pnp 00:06: [io  0x002e-0x002f]
[    0.185556] pnp 00:06: [io  0x004e-0x004f]
[    0.185559] pnp 00:06: [io  0x0061]
[    0.185561] pnp 00:06: [io  0x0063]
[    0.185563] pnp 00:06: [io  0x0065]
[    0.185565] pnp 00:06: [io  0x0067]
[    0.185567] pnp 00:06: [io  0x0080]
[    0.185570] pnp 00:06: [io  0x0092]
[    0.185572] pnp 00:06: [io  0x00b2-0x00b3]
[    0.185574] pnp 00:06: [io  0x0380-0x0383]
[    0.185577] pnp 00:06: [io  0x0680-0x069f]
[    0.185579] pnp 00:06: [io  0x0800-0x080f]
[    0.185581] pnp 00:06: [io  0x1000-0x107f]
[    0.185584] pnp 00:06: [io  0x1180-0x11bf]
[    0.185586] pnp 00:06: [io  0x1640-0x164f]
[    0.185588] pnp 00:06: [io  0xfe00]
[    0.185652] system 00:06: [io  0x0380-0x0383] has been reserved
[    0.185655] system 00:06: [io  0x0680-0x069f] has been reserved
[    0.185658] system 00:06: [io  0x0800-0x080f] has been reserved
[    0.185661] system 00:06: [io  0x1000-0x107f] has been reserved
[    0.185664] system 00:06: [io  0x1180-0x11bf] has been reserved
[    0.185667] system 00:06: [io  0x1640-0x164f] has been reserved
[    0.185670] system 00:06: [io  0xfe00] has been reserved
[    0.185674] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185696] pnp 00:07: [io  0x06a0-0x06af]
[    0.185699] pnp 00:07: [io  0x06b0-0x06ff]
[    0.185748] system 00:07: [io  0x06a0-0x06af] has been reserved
[    0.185751] system 00:07: [io  0x06b0-0x06ff] has been reserved
[    0.185756] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.185765] pnp 00:08: [io  0x0070-0x0077]
[    0.185772] pnp 00:08: [irq 8]
[    0.185805] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.185868] pnp 00:09: [io  0x0060]
[    0.185871] pnp 00:09: [io  0x0064]
[    0.185877] pnp 00:09: [irq 1]
[    0.185920] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.185935] pnp 00:0a: [irq 12]
[    0.185978] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
[    0.186001] pnp: PnP ACPI: found 11 devices
[    0.186003] ACPI: ACPI bus type pnp unregistered
[    0.193279] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 08] add_size 200000
[    0.193298] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
[    0.193305] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc02fffff pref]
[    0.193309] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0300000-0xc03000ff]
[    0.193318] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[    0.193321] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.193325] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
[    0.193329] pci 0000:00:01.0:   bridge window [mem 0xcc000000-0xceffffff]
[    0.193342] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193348] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.193352] pci 0000:00:1c.0:   bridge window [io  0x4000-0x7fff]
[    0.193359] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf5ffffff]
[    0.193365] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.193374] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
[    0.193378] pci 0000:00:1c.1:   bridge window [io  0x8000-0xbfff]
[    0.193384] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.193390] pci 0000:00:1c.1:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.193400] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[    0.193402] pci 0000:00:1c.5: PCI bridge to [bus 08]
[    0.193406] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    0.193413] pci 0000:00:1c.5:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.193419] pci 0000:00:1c.5:   bridge window [mem 0xc0000000-0xc02fffff pref]
[    0.193428] pci 0000:00:1e.0: PCI bridge to [bus 09]
[    0.193435] pci 0000:00:1e.0:   bridge window [mem 0xf8100000-0xf81fffff]
[    0.193486] pci 0000:00:1e.0: setting latency timer to 64
[    0.193491] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.193494] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.193497] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.193499] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.193502] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.193504] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.193507] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[    0.193509] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[    0.193512] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.193515] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[    0.193518] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.193521] pci_bus 0000:02: resource 0 [io  0x4000-0x7fff]
[    0.193523] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.193526] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.193529] pci_bus 0000:04: resource 0 [io  0x8000-0xbfff]
[    0.193532] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.193534] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.193537] pci_bus 0000:08: resource 0 [io  0xc000-0xcfff]
[    0.193540] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[    0.193542] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc02fffff pref]
[    0.193545] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
[    0.193548] pci_bus 0000:09: resource 4 [io  0x0000-0x0cf7]
[    0.193551] pci_bus 0000:09: resource 5 [io  0x0d00-0xffff]
[    0.193553] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[    0.193556] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.193558] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.193561] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.193564] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
[    0.193566] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
[    0.193612] NET: Registered protocol family 2
[    0.194484] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.198581] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.199116] TCP: Hash tables configured (established 524288 bind 65536)
[    0.199202] TCP: reno registered
[    0.199214] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.199256] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.199398] NET: Registered protocol family 1
[    0.199710] pci 0000:01:00.0: Boot video device
[    0.199737] PCI: CLS 64 bytes, default 64
[    0.199803] Unpacking initramfs...
[    0.271609] Freeing initrd memory: 3008k freed
[    0.272992] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.272998] software IO TLB [mem 0xbbece000-0xbfecdfff] (64MB) mapped at [ffff8800bbece000-ffff8800bfecdfff]
[    0.273029] Simple Boot Flag at 0x35 set to 0x1
[    0.273481] audit: initializing netlink socket (disabled)
[    0.273502] type=2000 audit(1359996366.273:1): initialized
[    0.287216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.289394] VFS: Disk quotas dquot_6.5.2
[    0.289451] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.289656] msgmni has been set to 7908
[    0.289965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.290013] io scheduler noop registered
[    0.290016] io scheduler deadline registered
[    0.290054] io scheduler cfq registered (default)
[    0.290202] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.290315] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.290451] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.290592] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.290755] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.290757] vesafb: scrolling: redraw
[    0.290760] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.291134] vesafb: framebuffer at 0xcd000000, mapped to 0xffffc90011000000, using 3072k, total 3072k
[    0.338864] Console: switching to colour frame buffer device 128x48
[    0.386482] fb0: VESA VGA frame buffer device
[    0.386495] intel_idle: does not run on family 6 model 15
[    0.386540] GHES: HEST is not enabled!
[    0.386610] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.387156] Linux agpgart interface v0.103
[    0.387255] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.424190] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.424226] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.424340] mousedev: PS/2 mouse device common for all mice
[    0.426741] rtc_cmos 00:08: RTC can wake from S4
[    0.426912] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    0.426946] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.426957] cpuidle: using governor ladder
[    0.426959] cpuidle: using governor menu
[    0.427013] drop_monitor: Initializing network drop monitor service
[    0.427094] TCP: cubic registered
[    0.427220] NET: Registered protocol family 10
[    0.427395] NET: Registered protocol family 17
[    0.427405] Key type dns_resolver registered
[    0.427650] PM: Hibernation image not present or could not be loaded.
[    0.427662] registered taskstats version 1
[    0.428443]   Magic number: 1:208:792
[    0.428562] rtc_cmos 00:08: setting system clock to 2013-02-04 16:46:06 UTC (1359996366)
[    0.430219] Freeing unused kernel memory: 812k freed
[    0.430499] Write protecting the kernel read-only data: 8192k
[    0.434496] Freeing unused kernel memory: 1248k freed
[    0.436428] Freeing unused kernel memory: 476k freed
[    0.445737] systemd-udevd[46]: starting version 197
[    0.456221] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.487779] ACPI: bus type usb registered
[    0.487823] usbcore: registered new interface driver usbfs
[    0.487853] usbcore: registered new interface driver hub
[    0.489385] usbcore: registered new device driver usb
[    0.490171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.490238] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.490243] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.490254] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.490274] ehci_hcd 0000:00:1a.7: debug port 1
[    0.494194] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.494223] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
[    0.495105] sdhci: Secure Digital Host Controller Interface driver
[    0.495108] sdhci: Copyright(c) Pierre Ossman
[    0.495374] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
[    0.496427] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.497456] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.497495] Registered led device: mmc0::
[    0.499489] SCSI subsystem initialized
[    0.501522] ACPI: bus type scsi registered
[    0.501611] libata version 3.00 loaded.
[    0.503391] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.503727] hub 1-0:1.0: USB hub found
[    0.503734] hub 1-0:1.0: 4 ports detected
[    0.504356] ahci 0000:00:1f.2: version 3.0
[    0.504443] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.504524] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    0.504528] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc 
[    0.504534] ahci 0000:00:1f.2: setting latency timer to 64
[    0.505430] scsi0 : ahci
[    0.505922] scsi1 : ahci
[    0.506252] scsi2 : ahci
[    0.506352] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
[    0.506356] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
[    0.506360] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
[    0.506410] ata_piix 0000:00:1f.1: version 2.13
[    0.506465] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.506842] scsi3 : ata_piix
[    0.507248] scsi4 : ata_piix
[    0.507333] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[    0.507337] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[    0.507409] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.507414] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.507427] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.507448] ehci_hcd 0000:00:1d.7: debug port 1
[    0.511369] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.511390] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
[    0.520025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.520229] hub 2-0:1.0: USB hub found
[    0.520235] hub 2-0:1.0: 6 ports detected
[    0.523359] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
[    0.553732] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.583404] firewire_ohci 0000:09:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[    0.610346] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.666991] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.675221] ata4.00: ATAPI: PIONEER DVDRW   DVR-K17B, 1.02, max MWDMA2
[    0.686963] ata4.00: configured for MWDMA2
[    0.720338] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[    0.823367] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.823811] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    0.826697] ata2: SATA link down (SStatus 0 SControl 300)
[    0.826729] ata3: SATA link down (SStatus 0 SControl 300)
[    0.868295] ata1.00: ATA-8: TOSHIBA MK5075GSX, GT001U, max UDMA/100
[    0.868298] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.869055] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    0.869221] ata1.00: configured for UDMA/100
[    0.869356] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5075GS GT00 PQ: 0 ANSI: 5
[    0.871020] scsi 3:0:0:0: CD-ROM            PIONEER  DVDRW   DVR-K17B 1.02 PQ: 0 ANSI: 5
[    0.869594] ACPI: Invalid Power Resource to register!
[    0.871251] ACPI: Invalid Power Resource to register!
[    0.871833] uhci_hcd: USB Universal Host Controller Interface driver
[    0.871876] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.871881] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.871890] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.871939] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[    0.873106] hub 3-0:1.0: USB hub found
[    0.873114] hub 3-0:1.0: 2 ports detected
[    0.873321] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.873326] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.873351] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.873383] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[    0.873641] hub 4-0:1.0: USB hub found
[    0.873647] hub 4-0:1.0: 2 ports detected
[    0.874002] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.874007] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.874015] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.874049] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[    0.874234] hub 5-0:1.0: USB hub found
[    0.874239] hub 5-0:1.0: 2 ports detected
[    0.874355] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.874359] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.874367] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.874411] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[    0.874579] hub 6-0:1.0: USB hub found
[    0.874584] hub 6-0:1.0: 2 ports detected
[    0.874696] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.874700] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.874707] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.874738] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[    0.874897] hub 7-0:1.0: USB hub found
[    0.874905] hub 7-0:1.0: 2 ports detected
[    0.878968] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.878974] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.879028] sd 0:0:0:0: [sda] Write Protect is off
[    0.879031] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.879055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.955489]  sda: sda1 sda3 sda4
[    0.955917] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.957155] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.957160] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.957404] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    0.983360] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[    1.083450] firewire_core 0000:09:09.0: created device fw0: GUID 00241b00970baa00, S400
[    1.233359] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[    1.273351] tsc: Refined TSC clocksource calibration: 1995.224 MHz
[    1.273356] Switching to clocksource tsc
[    1.421491] usbcore: registered new interface driver usbhid
[    1.421496] usbhid: USB HID core driver
[    1.655097] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    2.824143] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    2.844906] systemd[1]: Set hostname to <Archy>.
[    3.749717] systemd[1]: Cannot add dependency job for unit laptop-mode-tools.service, ignoring: Unit laptop-mode-tools.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode-tools.service' for details.
[    3.749994] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.750065] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.750082] systemd[1]: Starting Remote File Systems.
[    3.750097] systemd[1]: Reached target Remote File Systems.
[    3.750109] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.750141] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.750151] systemd[1]: Starting Delayed Shutdown Socket.
[    3.750183] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.750194] systemd[1]: Starting Encrypted Volumes.
[    3.750206] systemd[1]: Reached target Encrypted Volumes.
[    3.750277] systemd[1]: Starting udev Kernel Socket.
[    3.750303] systemd[1]: Listening on udev Kernel Socket.
[    3.750358] systemd[1]: Starting udev Control Socket.
[    3.750386] systemd[1]: Listening on udev Control Socket.
[    3.750402] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.750444] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.750482] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.750597] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.750610] systemd[1]: Expecting device dev-sda3.device...
[    3.750624] systemd[1]: Expecting device dev-disk-by\x2duuid-3883E4CA701B522E.device...
[    3.750638] systemd[1]: Starting Journal Socket.
[    3.750697] systemd[1]: Listening on Journal Socket.
[    3.750717] systemd[1]: Started File System Check on Root Device.
[    3.750729] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.753719] systemd[1]: Mounting Debug File System...
[    3.855700] systemd[1]: Started Load Kernel Modules.
[    3.920349] systemd[1]: Starting Set Up Additional Binary Formats...
[    3.940246] systemd[1]: Mounting Huge Pages File System...
[    3.943489] systemd[1]: Starting udev Coldplug all Devices...
[    3.953597] systemd[1]: Mounted FUSE Control File System.
[    3.953622] systemd[1]: Mounting Configuration File System...
[    3.960374] systemd[1]: Mounting POSIX Message Queue File System...
[    3.970259] systemd[1]: Starting udev Kernel Device Manager...
[    3.974150] systemd[1]: Starting Setup Virtual Console...
[    4.011166] systemd[1]: Starting Apply Kernel Variables...
[    4.016959] systemd[1]: Starting Journal Service...
[    4.031499] systemd[1]: Started Journal Service.
[    4.284180] EXT4-fs (sda4): re-mounted. Opts: (null)
[    4.722032] systemd-udevd[119]: starting version 197
[    6.286261] ACPI: AC Adapter [ACAD] (off-line)
[    6.374822] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
[    6.457312] acpi device:04: registered as cooling_device0
[    6.457340] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    6.457403] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input1
[    6.466118] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
[    6.466785] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    6.472004] input: PC Speaker as /devices/platform/pcspkr/input/input2
[    6.506957] [Firmware Bug]: Invalid critical threshold (0)
[    6.508215] thermal LNXTHERM:00: registered as thermal_zone0
[    6.508219] ACPI: Thermal Zone [THR1] (46 C)
[    6.537588] r592: driver successfully loaded
[    6.573013] ACPI: Battery Slot [BAT0] (battery present)
[    6.573112] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    6.573120] ACPI: Power Button [PWRB]
[    6.573180] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[    6.573185] ACPI: Sleep Button [SLPB]
[    6.573254] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[    6.573694] ACPI: Lid Switch [LID]
[    6.573788] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    6.573794] ACPI: Power Button [PWRF]
[    6.574369] wmi: Mapper loaded
[    6.619559] ACPI: Requesting acpi_cpufreq
[    6.641528] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
[    6.641537] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.641542] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[    6.641546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.641548] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \GPIO 1 (20120913/utaddress-251)
[    6.641553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.641554] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.678108] iTCO_vendor_support: vendor-support=0
[    6.683857] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    6.683911] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[    6.684087] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.787532] Monitor-Mwait will be used to enter C-1 state
[    6.787541] Monitor-Mwait will be used to enter C-2 state
[    6.787547] Monitor-Mwait will be used to enter C-3 state
[    6.787551] tsc: Marking TSC unstable due to TSC halts in idle
[    6.787571] ACPI: acpi_idle registered with cpuidle
[    6.787599] Switching to clocksource hpet
[    6.868065] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    6.868336] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
[    6.868542] r8169 0000:08:00.0 eth0: RTL8101e at 0xffffc90000664000, 00:1e:68:07:4c:8d, XID 94200000 IRQ 45
[    6.883675] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
[    6.883683] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.942314] input: HP WMI hotkeys as /devices/virtual/input/input7
[    7.335746] cfg80211: Calling CRDA to update world regulatory domain
[    7.698429] nvidia: module license 'NVIDIA' taints kernel.
[    7.698434] Disabling lock debugging due to kernel taint
[    7.750064] r852: Non dma capable device detected, dma disabled
[    7.750086] r852: driver loaded successfully
[    7.788915] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    7.800960] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[    7.800965] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[    7.811494] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    7.811565] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  313.18  Wed Jan  9 17:02:09 PST 2013
[    7.871637] iwl3945 0000:02:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[    7.871643] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[    7.871797] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
[    7.871988] Registered led device: phy0-led
[    7.894131] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[    7.903434] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[    8.083764] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.083936] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.171856] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 300495
[    8.283588] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[    8.825980] fuse init (API version 7.20)
[    8.859226] Adding 3145724k swap on /dev/sda3.  Priority:-1 extents:1 across:3145724k 
[    9.381210] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input12
[    9.381366] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1a.1-2/input0
[    9.509593] media: Linux media interface: v0.10
[    9.783208] Linux video capture interface: v2.00
[    9.890389] systemd-journald[122]: Received SIGUSR1
[    9.983120] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c)
[    9.987007] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input13
[    9.987112] usbcore: registered new interface driver uvcvideo
[    9.987115] USB Video Class driver (1.1.1)
[   12.568429] systemd-logind[818]: Watching system buttons on /dev/input/event6 (Power Button)
[   12.568526] systemd-logind[818]: Watching system buttons on /dev/input/event1 (Video Bus)
[   12.568614] systemd-logind[818]: Watching system buttons on /dev/input/event3 (Power Button)
[   12.568699] systemd-logind[818]: Watching system buttons on /dev/input/event5 (Lid Switch)
[   12.568786] systemd-logind[818]: Watching system buttons on /dev/input/event4 (Sleep Button)
[   16.723398] usb 2-2: new high-speed USB device number 3 using ehci_hcd
[   17.962875] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1072)
[   17.962885] NVRM: rm_init_adapter(0) failed
[   24.630603] Initializing USB Mass Storage driver...
[   24.630874] scsi5 : usb-storage 2-2:1.0
[   24.630986] usbcore: registered new interface driver usb-storage
[   24.630988] USB Mass Storage support registered.
[   25.634711] scsi 5:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
[   25.770178] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
[   25.836944] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   25.847909] r8169 0000:08:00.0 eth0: link down
[   25.847937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.865955] sd 5:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[   25.866568] sd 5:0:0:0: [sdb] Write Protect is off
[   25.866574] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
[   25.867187] sd 5:0:0:0: [sdb] No Caching mode page present
[   25.867695] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[   25.870951] sd 5:0:0:0: [sdb] No Caching mode page present
[   25.871477] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[   25.872573]  sdb: sdb1
[   25.874558] sd 5:0:0:0: [sdb] No Caching mode page present
[   25.875072] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[   25.875627] sd 5:0:0:0: [sdb] Attached SCSI removable disk

Have no idea what's going on.


E: Seems that the configuration is very sporadic.  During some bootups it works fine and other times it doesn't.  It doesn't look to be the video card itself as the system runs graphics perfectly fine on various livecds.

Last edited by MorningWood (2013-02-04 23:29:07)

Offline

#5 2013-02-06 20:44:40

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

Anyone?

Offline

#6 2013-02-07 08:42:55

Gusar
Member
Registered: 2009-08-25
Posts: 3,431

Re: rm_init_adapter(0) failed errors cause xserver not to launch

Logs aren't that hard to read. These two lines are easy to see in there:

[   17.962875] NVRM: RmInitAdapter failed! (0x25:0xffffffff:1072)
[   17.962885] NVRM: rm_init_adapter(0) failed

Google those. If you can't find anything, post at the nvidia forums: https://devtalk.nvidia.com/default/board/98/linux/ <- make sure to read the stickies there and provide the full bug report as they describe.

Offline

#7 2013-02-14 02:12:35

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

I agree, logs aren't that hard to read which is why I noted that I could not track down a fix and posted here. 
Oh well, guess I need to post this over at the nvidia board instead.

Offline

#8 2013-02-16 15:14:14

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

Bump to reflect title change.  Posted over at the nvidia board with little success so far.

EDIT:
Update: For  now it seems like I might have solved the problem.  Removed linux, linux-header, linux-firmware, nvidia, nvidia-utils, and Xorg-server packages then reinstalled linux packages, then nvidia and xorg-server packages and used the standard nvidia-xconfig xorg.conf configuration. Seems to be working fine for the time being and have not come into any problems in the last day or so, but we shall see.

EDIT2:
Just my luck.  As soon as I submitted the update, I noticed that I was missing xf86-input-synaptics.  After installing it, I'm back to square one.  So it seems (at least to my uneducated mind) that this is either synaptics configurations clashing with nvidia drivers or synaptics and evdev clashing with one another and nvidia drivers.

Last edited by MorningWood (2013-02-19 16:22:42)

Offline

#9 2013-02-22 03:16:59

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

Bump

Offline

#10 2013-02-23 18:21:11

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.

Is the output message I keep running into in dmesg when the system is running so the issue of graphics not working after installing must be pure coincidence.  It's very strange though because I have never had a problem with my configuration prior.  Is there any way to run a vga console with 1280x800 resolution and not have to run noveau?

Last edited by MorningWood (2013-02-23 18:26:39)

Offline

#11 2013-02-23 18:43:06

Gusar
Member
Registered: 2009-08-25
Posts: 3,431

Re: rm_init_adapter(0) failed errors cause xserver not to launch

Nope. It's either nouveau or (u)vesafb. A lot of people use (u)vesafb successfully with nvidia, but as that message says, it's not a supported configuration.

Offline

#12 2013-03-09 18:09:50

MorningWood
Member
Registered: 2008-06-06
Posts: 68

Re: rm_init_adapter(0) failed errors cause xserver not to launch

Don't know what the hell is going on but this is driving me nuts.  I tried vesafb and it didn't make a difference.  Backed up my home partition and started from scratch, didn't even restore any of my settings and am experiencing the same problems.  Going to try nouveau and if that doesn't work then I guess it's back to Windows for me. Shame.

E: Screen cannot be found with nouveau.

Mods please move this topic to multimedia.  Hoping to find more results there.
Thank you.

Last edited by MorningWood (2013-03-09 18:50:53)

Offline

Board footer

Powered by FluxBB