You are not logged in.

#1 2013-03-15 05:57:16

supernub
Member
Registered: 2013-03-15
Posts: 2

[Solved] tor /hidden_service not being created

I am trying to set up a tor hidden service, but tor does not seem to want to create the "hidden_service" folder at /var/lib/tor/ or any other place.

I have tried checking the permissions of /var/lib/tor and even set them to 777 just to see if it worked, and it didn't, /var/lib/tor is owned by tor according to ls -al, but the group is root (shouldn't matter if i set permissions to 777?)

I have tried manually creating hidden_service/ and setting it to be owned by tor (with 777), and it did not work

This thread on ubuntu forums has the same problem, and a post at the bottom says that the web server needs access hidden_service/ (which i think is false, why would the web server need to know about the keys?)

I uncommented the notices line in torrc and it does not generate any logs in /var/log/tor/notices.log

## CONFIGURED FOR ARCHLINUX

## Last updated 22 July 2005 for Tor 0.1.0.13.
## (May or may not work for older or newer versions of Tor.)
#
## See the man page, or http://tor.eff.org/tor-manual.html, for more
## options you can use in this file.
#
# On Unix, Tor will look for this file in someplace like "~/.tor/torrc" or
# "/etc/torrc"
#
# On Windows, Tor will look for the configuration file in someplace like
# "Application Data\tor\torrc" or "Application Data\<username>\tor\torrc"
#
# With the default Mac OS X installer, Tor will look in ~/.tor/torrc or
# /Library/Tor/torrc


## Replace this with "SocksPort 0" if you plan to run Tor only as a
## server, and not make any local application connections yourself.
SocksPort 9050 # what port to open for local application connections
SocksBindAddress 127.0.0.1 # accept connections only from localhost
#SocksBindAddress 192.168.0.1:9100 # listen on a chosen IP/port too

## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SocksPolicy is set, we accept
## all (and only) requests from SocksBindAddress.
#SocksPolicy accept 192.168.0.1/16
#SocksPolicy reject *

## Allow no-name routers (ones that the dirserver operators don't
## know anything about) in only these positions in your circuits.
## Other choices (not advised) are entry,exit,introduction.
AllowUnverifiedNodes middle,rendezvous

## Logs go to stdout at level "notice" unless redirected by something
## else, like one of the below lines. You can have as many log lines as
## you want.
##
## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
Log notice file /var/log/tor/notices.log
## Send only debug and info messages to /var/log/tor/debug.log
#Log debug-info file /var/log/tor/debug.log
## Send ONLY debug messages to /var/log/tor/debug.log
#Log debug-debug file /var/log/tor/debug.log
## To use the system log instead of Tor's logfiles, uncomment these lines:
Log notice syslog
## To send all messages to stderr:
#Log debug stderr

## Uncomment this to start the process in the background... or use
## --runasdaemon 1 on the command line.
RunAsDaemon 1
User tor
Group tor

## Tor only trusts directories signed with one of these keys, and
## uses the given addresses to connect to the trusted directory
## servers. If no DirServer lines are specified, Tor uses the built-in
## defaults (moria1, moria2, tor26), so you can leave this alone unless
## you need to change it.
#DirServer 18.244.0.188:9031 FFCB 46DB 1339 DA84 674C 70D7 CB58 6434 C437 0441
#DirServer 18.244.0.114:80 719B E45D E224 B607 C537 07D0 E214 3E2D 423E 74CF
#DirServer 86.59.21.38:80 847B 1F85 0344 D787 6491 A548 92F9 0493 4E4E B85D

## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
DataDirectory /var/lib/tor

## The port on which Tor will listen for local connections from Tor controller
## applications, as documented in control-spec.txt.  NB: this feature is
## currently experimental.
#ControlPort 9051

############### This section is just for location-hidden services ###

## Look in .../hidden_service/hostname for the address to tell people.
## HiddenServicePort x y:z says to redirect a port x request from the
## client to y:z.

HiddenServiceDir /var/lib/tor/hidden_service/
HiddenServicePort 80 127.0.0.1:80

#HiddenServiceDir /var/lib/tor/other_hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServicePort 22 127.0.0.1:22
#HiddenServiceNodes moria1,moria2
#HiddenServiceExcludeNodes bad,otherbad

################ This section is just for servers #####################

## NOTE: If you enable these, you should consider mailing your identity
## key fingerprint to the tor-ops, so we can add you to the list of
## servers that clients will trust. See
## http://tor.eff.org/doc/tor-doc.html#server for details.

## Required: A unique handle for this server
#Nickname ididnteditheconfig

## The IP or fqdn for this server. Leave commented out and Tor will guess.
#Address noname.example.com

## Contact info that will be published in the directory, so we can
## contact you if you need to upgrade or if something goes wrong.
## This is optional but recommended.
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>

## Required: what port to advertise for tor connections
#ORPort 9001
## If you want to listen on a port other than the one advertised
## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment
## the line below. You'll need to do ipchains or other port forwarding
## yourself to make this work.
#ORBindAddress 0.0.0.0:9090

## Uncomment this to mirror the directory for others (please do)
#DirPort 9030 # what port to advertise for directory connections
## If you want to listen on a port other than the one advertised
## in DirPort (e.g. to advertise 80 but bind 9091), uncomment the line
## below. You'll need to do ipchains or other port forwarding yourself
## to make this work.
#DirBindAddress 0.0.0.0:9091

## A comma-separated list of exit policies. They're considered first
## to last, and the first match wins. If you want to *replace*
## the default exit policy, end this with either a reject *:* or an
## accept *:*. Otherwise, you're *augmenting* (prepending to) the
## default exit policy. Leave commented to just use the default, which is
## available in the man page or at http://tor.eff.org/documentation.html
##
## Look at http://tor.eff.org/faq-abuse.html#TypicalAbuses
## for issues you might encounter if you use the default exit policy.
##
## If certain IPs and ports are blocked externally, e.g. by your firewall,
## you should update your exit policy to reflect this -- otherwise Tor
## users will be told that those destinations are down.
##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
#ExitPolicy accept *:119 # accept nntp as well as default exit policy
#ExitPolicy reject *:* # middleman only -- no exits allowed

Last edited by supernub (2013-03-15 08:22:01)

Offline

#2 2013-03-15 07:52:49

supernub
Member
Registered: 2013-03-15
Posts: 2

Re: [Solved] tor /hidden_service not being created

I think it might be that my disk is 100% full, ill update this post in a bit once i finish reinstalling on a larger disk. (virtual)

update:

yep,

hidden_service/
hidden_service/hostname
hidden_service/private_key

are all being generated properly to the best of my knowledge.

Last edited by supernub (2013-03-15 08:21:34)

Offline

Board footer

Powered by FluxBB