You are not logged in.

#1 2013-03-21 14:10:29

blackout23
Member
Registered: 2011-11-16
Posts: 781

[SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

Hello,

I backed up my Arch Install which is one root partition covering the entire SDD with Clonezilla, to play around with Gentoo and FreeBSD on my Laptop.

Now I restored the image and when GRUB 2 loads I see "error: file not found" three times for a short momemt before I'm in the GRUB 2 menu.
When I boot my I also see these 3 messages (probably the once from the early loading process) and "Loading Linux ck kernel...." "Loading initrafms...." "Press any key to continue..." When I wait for a short time or press enter it boots like expected (fsck message appears for a short time since I'm using quite boot and I'm in KDM after that).

Grub loading...
error: file not found
error: file not found
error: file not found

Loading Linux ck kernel...
Loading initramfs...

Press any key to continue...

I did not have this when I  backed it up. It booted into the menu and when I booted the menu entry it would go black to show me the fsck message and seconds later I was in KDM.

I tried $ sudo grub-mkconfig but it did not change anything.

This is my current /boot/grub/grub.cfg

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a93fa938-f74f-477d-9573-678340bb2940
else
  search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux ck kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a93fa938-f74f-477d-9573-678340bb2940
	else
	  search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
	fi
	echo	'Loading Linux ck kernel ...'
	linux	/boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro  quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-linux-ck.img
}
menuentry 'Arch GNU/Linux, with Linux ck kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a93fa938-f74f-477d-9573-678340bb2940
	else
	  search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
	fi
	echo	'Loading Linux ck kernel ...'
	linux	/boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro  quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-linux-ck-fallback.img
}
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a93fa938-f74f-477d-9573-678340bb2940
	else
	  search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
	fi
	echo	'Loading Linux core repo kernel ...'
	linux	/boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro  quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-linux.img
}
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
	load_video
	set gfxpayload=keep
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  a93fa938-f74f-477d-9573-678340bb2940
	else
	  search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
	fi
	echo	'Loading Linux core repo kernel ...'
	linux	/boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro  quiet
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initramfs-linux-fallback.img
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

Anyone has a clue what files it is looking for? And why it doesn't boot straight away, when there is nothing that keeps it from booting up normal anyway?

Last edited by blackout23 (2013-03-21 16:16:59)

Offline

#2 2013-03-21 14:31:31

the.ridikulus.rat
Member
From: Indiana, USA
Registered: 2011-10-04
Posts: 765

Re: [SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.

Offline

#3 2013-03-21 14:34:41

blackout23
Member
Registered: 2011-11-16
Posts: 781

Re: [SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

the.ridikulus.rat wrote:

Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.

I think I'm already on Grub 2.0.0 otherwise I wouldn't have this cryptic menu configuration file.

local/grub-bios 2.00-1
    GNU GRand Unified Bootloader - i386 PC BIOS Modules
local/grub-common 2.00-1
    GNU GRand Unified Bootloader - Utilities and Common Files

Offline

#4 2013-03-21 16:03:01

the.ridikulus.rat
Member
From: Indiana, USA
Registered: 2011-10-04
Posts: 765

Re: [SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

Did you upgrade the files in /boot/grub by running grub-install? That step is also important and is NOT run automatically when pacman installs/upgrades grub-{common,bios}. See GRUB wiki page for more info.

Offline

#5 2013-03-21 16:16:25

blackout23
Member
Registered: 2011-11-16
Posts: 781

Re: [SOLVED] GRUB 2 - "error: file not found" after Clonezilla Restore

Like I said the installation was OK, when I backed it up.

Nevertheless running:

# modprobe dm-mod
# grub-install --recheck /dev/sda
# grub-mkconfig -o /boot/grub/grub.cfg

again.

Fixed it. Thank you for your help.

Last edited by blackout23 (2013-03-21 16:16:39)

Offline

Board footer

Powered by FluxBB