You are not logged in.
Hello,
I backed up my Arch Install which is one root partition covering the entire SDD with Clonezilla, to play around with Gentoo and FreeBSD on my Laptop.
Now I restored the image and when GRUB 2 loads I see "error: file not found" three times for a short momemt before I'm in the GRUB 2 menu.
When I boot my I also see these 3 messages (probably the once from the early loading process) and "Loading Linux ck kernel...." "Loading initrafms...." "Press any key to continue..." When I wait for a short time or press enter it boots like expected (fsck message appears for a short time since I'm using quite boot and I'm in KDM after that).
Grub loading...
error: file not found
error: file not found
error: file not found
Loading Linux ck kernel...
Loading initramfs...
Press any key to continue...I did not have this when I backed it up. It booted into the menu and when I booted the menu entry it would go black to show me the fsck message and seconds later I was in KDM.
I tried $ sudo grub-mkconfig but it did not change anything.
This is my current /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch GNU/Linux, with Linux ck kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux ck kernel ...'
linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-ck.img
}
menuentry 'Arch GNU/Linux, with Linux ck kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-ck kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux ck kernel ...'
linux /boot/vmlinuz-linux-ck root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-ck-fallback.img
}
menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
}
menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-a93fa938-f74f-477d-9573-678340bb2940' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 a93fa938-f74f-477d-9573-678340bb2940
else
search --no-floppy --fs-uuid --set=root a93fa938-f74f-477d-9573-678340bb2940
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=/dev/sda1 elevator=noop ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###Anyone has a clue what files it is looking for? And why it doesn't boot straight away, when there is nothing that keeps it from booting up normal anyway?
Last edited by blackout23 (2013-03-21 16:16:59)
Offline
Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.
Offline
Upgrade to grub 2.00, that will give info on which file is actually missing. And then recreate /boot/grub/grub.cfg and check whether that error is gone.
I think I'm already on Grub 2.0.0 otherwise I wouldn't have this cryptic menu configuration file.
local/grub-bios 2.00-1
GNU GRand Unified Bootloader - i386 PC BIOS Modules
local/grub-common 2.00-1
GNU GRand Unified Bootloader - Utilities and Common FilesOffline
Did you upgrade the files in /boot/grub by running grub-install? That step is also important and is NOT run automatically when pacman installs/upgrades grub-{common,bios}. See GRUB wiki page for more info.
Offline
Like I said the installation was OK, when I backed it up.
Nevertheless running:
# modprobe dm-mod
# grub-install --recheck /dev/sda
# grub-mkconfig -o /boot/grub/grub.cfg
again.
Fixed it. Thank you for your help.
Last edited by blackout23 (2013-03-21 16:16:39)
Offline