Failed to load kernel because driver won't build

TwoFlower · 2013-03-29 18:46:12

Hi. After I upgraded and restarted my computer Network Manager did not automatically connect to my wireless network as it usually does. Instead, when I clicked on the icon it says

Ethernet Networks

disconnected (in grey so I can't click on it).

It only gives me the option of editing VPN connections. I saw another post saying that I should set IPv6 as link-local so I went into Network Connections and chose a network that I had previously connected to and changed the IPv6 on it to link-local which did nothing.

I then tried things with systemctl in the terminal to try and fix things:

 sudo systemctl enable dhcpcd@enp3s0.service

went off without a hitch. However, then

 sudo systemctl start dhcpcd@enp3s0.service

was met with

 Job for dhcpcd@enp3s0.service failed.

I then tried

 sudo systemctl status dhcpcd@enp3s0.service

 dhcpcd@enp3s0.service - dhcpcd on enp3s0
	  Loaded: loaded (/usr/lib/systemd/system/dhcpcd@.service; enabled)
	  Active: failed (Result: exit-code) since Fri 2013-03-29 21:05:04 AST; 40s ago
	 Process: 1474 ExecStart=/usr/sbin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)

Mar 29 21:04:34 arch systemd[1]: Starting dhcpcd on enp3s0...
Mar 29 21:04:34 arch dhcpcd[1474]: version 5.6.7 starting
Mar 29 21:04:34 arch dhcpcd[1474]: enp3s0: waiting for carrier
Mar 29 21:05:04 arch systemd[1]: dhcpcd@enp3s0.service: control process exited, code=exited status=1
Mar 29 21:05:04 arch systemd[1]: Failed to start dhcpcd on enp3s0.
Mar 29 21:05:04 arch systemd[1]: Unit dhcpcd@enp3s0.service entered failed state

Last edited by TwoFlower (2013-04-03 11:11:18)

ewaller · 2013-03-29 19:58:40

Let;s look at a couple things.
What is the output of lspci -nn (That is two n's, not m)
Then, force the NIC up with: sudo ip link set enp3s0 up
Then post the output of ip link

Also, have you checked the network cable? Are the link lights on at both ends? (Just checking you would not believe how often it is the cable)

TwoFlower · 2013-03-30 05:49:05

The cable is connected to a router to which other computers in my house are connected to and they are working perfectly normal with the internet (however they are Windows thus inferior to Arch Linux ). I'm sorry I should have mentioned that earlier. I am in a bit of a hurry so I will post my output a little bit later in the day.

TwoFlower · 2013-03-30 10:12:25

Output for "lspci -nn":

00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
02:00.0 Network controller [0280]: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe [1814:3090]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)

Output for "ip link" after forcing NIC up:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
    link/ether 78:ac:c0:49:00:7b brd ff:ff:ff:ff:ff:ff

ewaller · 2013-03-30 15:43:29

Well, let's try this.

What is the output of ethtool enp3s0

and of cat "/sys/bus/pci/devices/0000:03:0.0/power/control" ??
Should that file not exist, please post the output of ls -l /sys/bus/pci/devices/0000:03:00/

TwoFlower · 2013-03-30 18:14:59

Output for "ethtool enp3s0":

 Settings for enp3s0:
	Supported ports: [ TP MII ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	Supported pause frame use: No
	Supports auto-negotiation: Yes
	Advertised link modes:  10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	Advertised pause frame use: Symmetric Receive-only
	Advertised auto-negotiation: Yes
	Speed: 10Mb/s
	Duplex: Half
	Port: MII
	PHYAD: 0
	Transceiver: internal
	Auto-negotiation: on
Cannot get wake-on-lan settings: Operation not permitted
	Current message level: 0x00000033 (51)
			       drv probe ifdown ifup
	Link detected: no

Output for "cat "/sys/bus/pci/devices/0000:03:0.0/power/control" ":

 cat: /sys/bus/pci/devices/0000:03:0.0/power/control: No such file or directory

Output for "ls -l /sys/bus/pci/devices/0000:03:00/":

 ls: cannot access /sys/bus/pci/devices/0000:03:00/: No such file or directory

TwoFlower · 2013-03-31 10:45:30

I think that the output for "journalctl -xn" might also be useful because when when the job for enp3s0 failed it told me to look at its output:

 -- Logs begin at Sat 2013-03-02 12:55:29 AST, end at Fri 2013-03-29 18:11:35 AST
Mar 27 22:40:02 arch slim[7118]: pam_unix(slim:auth): auth could not identify pa
Mar 27 22:42:22 arch pulseaudio[7166]: [pulseaudio] module-x11-publish.c: PulseA
Mar 27 22:43:56 arch pulseaudio[7483]: [pulseaudio] pid.c: Daemon already runnin
-- Reboot --
Mar 28 06:32:50 arch pulseaudio[336]: [pulseaudio] module-x11-publish.c: PulseAu
Mar 28 06:34:04 arch pulseaudio[722]: [pulseaudio] pid.c: Daemon already running
-- Reboot --
Mar 28 15:43:52 arch pulseaudio[1148]: [pulseaudio] client-conf-x11.c: xcb_conne
Mar 28 17:21:03 arch pulseaudio[2266]: [pulseaudio] pid.c: Stale PID file, overw
-- Reboot --
Mar 29 18:11:35 arch pulseaudio[450]: [pulseaudio] pid.c: Daemon already running
lines 1-12/12 (END)
-- Logs begin at Sat 2013-03-02 12:55:29 AST, end at Fri 2013-03-29 18:11:35 AST. --
Mar 27 22:40:02 arch slim[7118]: pam_unix(slim:auth): auth could not identify password for [exit]
Mar 27 22:42:22 arch pulseaudio[7166]: [pulseaudio] module-x11-publish.c: PulseAudio information vanished from X11!
Mar 27 22:43:56 arch pulseaudio[7483]: [pulseaudio] pid.c: Daemon already running.
-- Reboot --
Mar 28 06:32:50 arch pulseaudio[336]: [pulseaudio] module-x11-publish.c: PulseAudio information vanished from X11!
Mar 28 06:34:04 arch pulseaudio[722]: [pulseaudio] pid.c: Daemon already running.
-- Reboot --
Mar 28 15:43:52 arch pulseaudio[1148]: [pulseaudio] client-conf-x11.c: xcb_connection_has_error() returned true
Mar 28 17:21:03 arch pulseaudio[2266]: [pulseaudio] pid.c: Stale PID file, overwriting.
-- Reboot --
Mar 29 18:11:35 arch pulseaudio[450]: [pulseaudio] pid.c: Daemon already running.

TwoFlower · 2013-03-31 11:08:11

I rebooted my computer and saw something I don't think I saw before in the startup script between the syslinux and login screens which I think said that it failed to load kernel modules (however it went by vast so I'm not exactly sure. Once I was logged in I tried "sudo systemctl status systemd-modules-load.service" and I got:

 systemd-modules-load.service - Load Kernel Modules
	  Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
	  Active: failed (Result: exit-code) since Sun 2013-03-31 13:46:19 AST; 14min ago
	    Docs: man:systemd-modules-load.service(8)
	          man:modules-load.d(5)
	 Process: 119 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)

Mar 31 13:46:19 arch systemd[1]: systemd-modules-load.service: main process...RE
Mar 31 13:46:19 arch systemd[1]: Failed to start Load Kernel Modules.
Mar 31 13:46:19 arch systemd[1]: Unit systemd-modules-load.service entered ...te
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.

The output of "ls -al /etc/modules-load.d/" is

 total 12
drwxr-xr-x  2 root root 4096 Mar  1 00:18 .
drwxr-xr-x 75 root root 4096 Mar 29 21:16 ..
-rw-r--r--  1 root root   10 Mar  1 00:18 3090.conf

The output of "cat /etc/modules-load.d/3090.conf" is

 rt3090sta

rt3090sta is the driver for my Realtek RT3090 network card which is why I feel that the fact that there is a problem with the kernel modules could be linked to the problem of not being able to connect to anything at all.

TwoFlower · 2013-03-31 11:17:15

"sudo dhcpcd enp3s0"

 dhcpcd[907]: version 5.6.7 starting
dhcpcd[907]: enp3s0: waiting for carrier
dhcpcd[907]: timed out

"sudo systemctl --failed --all"

 UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
dhcpcd@enp3s0.service        loaded failed failed dhcpcd on enp3s0
systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

2 loaded units listed.
To show all installed unit files use 'systemctl list-unit-files'.

P.S. sorry for all the individual post. It's just that each time I posted I realised that there is some more output that you may find useful and that was kind of a vicious circle. At least now I think we know what the problem is however I still don't know what needs to be done to solve it.

TwoFlower · 2013-03-31 13:28:37

Since this appears to actually be a kernel problem as opposed to a networking one, perhaps this should be moved to kernel and hardware?

ewaller · 2013-03-31 14:30:22

Moved.

TwoFlower · 2013-03-31 18:36:44

It is nighttime.... something goes bump...

WonderWoofy · 2013-03-31 18:54:58

I have no idea what is wrong with your network card, but I just wanted to mention that when systemd tells you to check the output of "journalctl -xn", it is probably not telling you to check the output of the user journal. So unless you are part of the "systemd-journal" group, you need to pass that command as the superuser.

If you want actual useful journal output as a normal user, do:

# gpasswd -a twoflower systemd-journal

Then of course you have to log out and lack in again for these settings to take effect.

TwoFlower · 2013-04-01 11:49:14

Thank you for that WonderWoofy but if anyone has any idea how to fix this please help because I am desperate.

TwoFlower · 2013-04-01 11:57:48

Relevant output for "journalctl -xn" as super user:

 Apr 01 14:51:55 arch kernel: sd 9:0:0:0: [sdb] No Caching mode page present
Apr 01 14:51:55 arch kernel: sd 9:0:0:0: [sdb] Assuming drive cache: write through
Apr 01 14:51:55 arch kernel:  sdb: sdb1
Apr 01 14:51:55 arch kernel: sd 9:0:0:0: [sdb] No Caching mode page present
Apr 01 14:51:55 arch kernel: sd 9:0:0:0: [sdb] Assuming drive cache: write through
Apr 01 14:51:55 arch kernel: sd 9:0:0:0: [sdb] Attached SCSI removable disk

TwoFlower · 2013-04-02 19:46:00

dhcpcd@enp3s0.service is no longer a problem because after I connected my computer to a wired connection it randomly decided to start working. Unfortunately, systemd-modules-load.service is still at large.

TwoFlower · 2013-04-02 20:05:10

Okay. So I was able to pinpoint the exact problem with why I cannot start systemd-modules-load.service. I went back to the output from sudo systemctl status systemd-modules-load.service and looked at the process number (I have already posted the output for this command above as can be seen if you use Ctrl-F) in the command journalctl -b _PID=x where "x" is the process number.

I got the following output:

 Apr 02 22:42:34 arch systemd-modules-load[6007]: Failed to find module 'rt3090sta'

which is basically the exact reason why the kernel modules fails to load. I tried installing the file for rt3090 from the AUR but got:

 ==> ERROR: A failure occurred in build().
    Aborting...

So how do I fix this issue?

WonderWoofy · 2013-04-02 20:08:59

TwoFlower wrote:

<snip>
I tried installing the file for rt3090 from the AUR but got:
 ==> ERROR: A failure occurred in build().
    Aborting... 
So how do I fix this issue?

How do you expect anyone to tell you what went wrong when you only post that much of the output?

TwoFlower · 2013-04-02 20:11:22

Sorry. My mistake:

 ==> Making package: rt3090 2.4.0.4-1 (Tue Apr  2 23:08:28 AST 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
  -> Downloading 2010_1217_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO.zip...
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  972k  100  972k    0     0   170k      0  0:00:05  0:00:05 --:--:--  233k
  -> Found config.mk.new
  -> Found Makefile.new
==> Validating source files with md5sums...
    2010_1217_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO.zip ... Passed
    config.mk.new ... Passed
    Makefile.new ... Passed
==> Extracting Sources...
  -> Extracting 2010_1217_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO.zip with bsdtar
==> Starting build()...
make -C tools
make[1]: Entering directory `/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/tools'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/tools/bin2h
cp -f os/linux/Makefile.6 /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/Makefile
make -C /lib/modules/3.8.4-1-ARCH/build SUBDIRS=/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux modules
make[1]: Entering directory `/usr/src/linux-3.8.4-1-ARCH'
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/crypt_md5.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/crypt_sha2.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/crypt_hmac.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/crypt_aes.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/crypt_arc4.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/mlme.o
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/mlme.c: In function 'MlmeResetRalinkCounters':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/mlme.c:870:2: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/mlme.c:870:2: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/mlme.c: In function 'BssTableSetEntry':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/mlme.c:5822:39: warning: operation on 'Tab->BssOverlapNr' may be undefined [-Wsequence-point]
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_wep.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/action.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_data.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_init.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_tkip.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_aes.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_sync.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/eeprom.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_sanity.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_info.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_cfg.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_wpa.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/dfs.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/spectrum.o
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/spectrum.c: In function 'PeerMeasureReportAction':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/spectrum.c:1966:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Wformat]
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_timer.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rt_channel.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_profile.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_asic.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_cmd.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/assoc.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/auth.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/auth_rsp.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/sync.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/sanity.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/rtmp_data.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/connect.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/wpa.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/ags.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../sta/sta_cfg.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_init_inf.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_profile.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/sta_ioctl.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.o
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c: In function 'duplicate_pkt':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:484:3: warning: passing argument 1 of 'memmove' makes pointer from integer without a cast [enabled by default]
In file included from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/string.h:4:0,
                 from include/linux/string.h:17,
                 from include/linux/bitmap.h:8,
                 from include/linux/cpumask.h:11,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/cpumask.h:4,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/msr.h:10,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/processor.h:20,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/thread_info.h:22,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/os/rt_linux.h:31,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/rtmp_os.h:32,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/rt_config.h:62,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:28:
/usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/string_64.h:58:7: note: expected 'void *' but argument is of type 'sk_buff_data_t'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:486:3: warning: passing argument 1 of 'memmove' makes pointer from integer without a cast [enabled by default]
In file included from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/string.h:4:0,
                 from include/linux/string.h:17,
                 from include/linux/bitmap.h:8,
                 from include/linux/cpumask.h:11,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/cpumask.h:4,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/msr.h:10,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/processor.h:20,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/thread_info.h:22,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/os/rt_linux.h:31,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/rtmp_os.h:32,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/rt_config.h:62,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:28:
/usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/string_64.h:58:7: note: expected 'void *' but argument is of type 'sk_buff_data_t'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c: In function 'ClonePacket':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:636:23: warning: assignment makes integer from pointer without a cast [enabled by default]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c: In function 'update_os_packet_info':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:658:15: warning: assignment makes integer from pointer without a cast [enabled by default]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c: In function 'wlan_802_11_to_802_3_packet':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:679:15: warning: assignment makes integer from pointer without a cast [enabled by default]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c: In function 'send_monitor_packets':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:952:9: warning: format '%d' expects argument of type 'int', but argument 3 has type 'long unsigned int' [-Wformat]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c: In function 'RtmpOSNetDevDetach':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:1701:38: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c: In function 'RtmpOSNetDevAttach':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_linux.c:1738:38: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_main_dev.o
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_main_dev.c: In function 'MainVirtualIF_close':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_main_dev.c:121:13: warning: unused variable 'Cancelled' [-Wunused-variable]
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/ba_action.o
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/ba_action.c: In function 'convert_reordering_packet_to_preAMSDU_or_802_3_packet':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/ba_action.c:1568:2: warning: assignment makes integer from pointer without a cast [enabled by default]
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_mac_pci.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/cmm_data_pci.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/ee_prom.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/ee_efuse.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_mcu.o
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_mcu.c: In function 'RtmpAsicLoadFirmware':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_mcu.c:352:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_mcu.c:355:2: warning: passing argument 1 of 'writel' makes integer from pointer without a cast [enabled by default]
In file included from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/realmode.h:5:0,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/acpi.h:32,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/fixmap.h:19,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/apic.h:12,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/smp.h:13,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/mmzone_64.h:10,
                 from /usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/mmzone.h:4,
                 from include/linux/mmzone.h:909,
                 from include/linux/gfp.h:4,
                 from include/linux/kmod.h:22,
                 from include/linux/module.h:13,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/os/rt_linux.h:31,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/rtmp_os.h:32,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/include/rt_config.h:62,
                 from /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_mcu.c:28:
/usr/src/linux-3.8.4-1-ARCH/arch/x86/include/asm/io.h:63:1: note: expected 'unsigned int' but argument is of type 'ULONG *'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rtmp_mcu.c:356:2: warning: format '%d' expects argument of type 'int', but argument 2 has type 'ULONG' [-Wformat]
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../chips/rt30xx.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../common/rt_rf.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../chips/rt3090.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_pci_rbus.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/rt_rbus_pci_util.o
  CC [M]  /home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.o
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:37:23: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'rt2860_remove_one'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:38:22: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'rt2860_probe'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:60:46: error: expected '=', ',', ';', 'asm' or '__attribute__' before '__devinitdata'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:87:17: error: 'rt2860_pci_tbl' undeclared here (not in a function)
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:88:17: error: 'rt2860_probe' undeclared here (not in a function)
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:90:5: error: implicit declaration of function '__devexit_p' [-Werror=implicit-function-declaration]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:90:29: error: 'rt2860_remove_one' undeclared here (not in a function)
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:283:24: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'rt2860_probe'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:449:23: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'rt2860_remove_one'
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c: In function 'RTMPrt3xSetPCIePowerLinkCtrl':
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:941:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'ULONG' [-Wformat]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:974:5: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'ULONG' [-Wformat]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:986:5: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'ULONG' [-Wformat]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:949:11: warning: unused variable 'vendor_id' [-Wunused-variable]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:1000:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'ULONG' [-Wformat]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:1027:3: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'ULONG' [-Wformat]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:934:8: warning: unused variable 'offset' [-Wunused-variable]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:933:8: warning: unused variable 'Vendor' [-Wunused-variable]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c: At top level:
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:514:14: warning: 'RTMPInitPCIeDevice' defined but not used [-Wunused-function]
/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.c:73:1: error: '__mod_pci_device_table' aliased to undefined symbol 'rt2860_pci_tbl'
cc1: some warnings being treated as errors
make[2]: *** [/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux/../../os/linux/pci_main_dev.o] Error 1
make[1]: *** [_module_/home/imran/Downloads/rt3090/src/20101216_RT3090_LinuxSTA_V2.4.0.4_WiFiBTCombo_DPO/os/linux] Error 2
make[1]: Leaving directory `/usr/src/linux-3.8.4-1-ARCH'
make: *** [LINUX] Error 2
==> ERROR: A failure occurred in build().
    Aborting...

The whole story. Hope that helps.

Last edited by TwoFlower (2013-04-02 20:57:53)

Arch Linux

#1 2013-03-29 18:46:12

Failed to load kernel because driver won't build

#2 2013-03-29 19:58:40

Re: Failed to load kernel because driver won't build

#3 2013-03-30 05:49:05

Re: Failed to load kernel because driver won't build

#4 2013-03-30 10:12:25

Re: Failed to load kernel because driver won't build

#5 2013-03-30 15:43:29

Re: Failed to load kernel because driver won't build

#6 2013-03-30 18:14:59

Re: Failed to load kernel because driver won't build

#7 2013-03-31 10:45:30

Re: Failed to load kernel because driver won't build

#8 2013-03-31 11:08:11

Re: Failed to load kernel because driver won't build

#9 2013-03-31 11:17:15

Re: Failed to load kernel because driver won't build

#10 2013-03-31 13:28:37

Re: Failed to load kernel because driver won't build

#11 2013-03-31 14:30:22

Re: Failed to load kernel because driver won't build

#12 2013-03-31 18:36:44

Re: Failed to load kernel because driver won't build

#13 2013-03-31 18:54:58

Re: Failed to load kernel because driver won't build

#14 2013-04-01 11:49:14

Re: Failed to load kernel because driver won't build

#15 2013-04-01 11:57:48

Re: Failed to load kernel because driver won't build

#16 2013-04-02 19:46:00

Re: Failed to load kernel because driver won't build

#17 2013-04-02 20:05:10

Re: Failed to load kernel because driver won't build

#18 2013-04-02 20:08:59

Re: Failed to load kernel because driver won't build

#19 2013-04-02 20:11:22

Re: Failed to load kernel because driver won't build

Board footer