You are not logged in.

#1 2013-04-11 12:21:42

mister.wardrop
Member
Registered: 2013-04-11
Posts: 5

[GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Greetings all!

I have tried several times to get GNOME 3.8 work properly on my Arch box; including when GNOME 3.8 was in the gnome-unstable repositories. Every time has resulted in hard-freezes when I run "systemctl start gdm"; or if it is enabled as a target. At first, I thought it might be a lingering configuration issue; and so I reinstalled all the GNOME packages; and then every system package. At last, just to make sure, I reinstalled Arch Linux. The issue remains. Occasionally I am able to get it running; but usually only after a fresh install (until I reboot); or after another DE has been running (such as Xfce) or a window manager (such as Metacity). Note that GNOME 3.6 works fine.

The logs don't really illuminate anything (at least they didn't). I will reply to this post with the logs (as I will have to trigger the fault again).

My system configuration is based around an Intel 2500K (HD 3000) i5 processor. I haven't found this bug reported anywhere... but does anyone else experience this? Or have any idea what might be going on?

Offline

#2 2013-04-11 12:38:38

mister.wardrop
Member
Registered: 2013-04-11
Posts: 5

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

The only logs after the hard freeze is the :0.log file; which contains the X.org startup; and doesn't look very interesting. Just in case someone sees something I don't though, here it is:

X.Org X Server 1.14.0
Release Date: 2013-03-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.2-1-ARCH x86_64 
Current Operating System: Linux themadhatter-desktop 3.8.6-1-ARCH #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ec44b839-cdab-4409-9358-90a439ff9e4b ro quiet
Build Date: 09 March 2013  11:43:05AM
 
Current version of pixman: 0.28.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 11 22:24:55 2013
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
	Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) config/udev: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 8086:0112:1043:844d rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.14.0, module version = 1.0.0
(==) AIGLX enabled
Loading extension GLX
(==) Matched intel as autoconfigured driver 0
(==) Matched intel as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Matched modesetting as autoconfigured driver 3
(==) Matched fbdev as autoconfigured driver 4
(==) Assigned the driver to the xf86ConfigLayout
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.14.0, module version = 2.21.6
(WW) Warning, couldn't open module vesa
(II) Unloading vesa
(EE) Failed to load module "vesa" (module does not exist, 0)
(WW) Warning, couldn't open module modesetting
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
(WW) Warning, couldn't open module fbdev
(II) Unloading fbdev
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
	Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
	Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
	Haswell Server (GT2+), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
	Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
	Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
	Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
	Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
	Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
	Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
	ValleyView PO board
(++) using VT number 1

(II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Desktop (GT2)
(**) intel(0): Relaxed fencing enabled
(**) intel(0): Wait on SwapBuffers? enabled
(**) intel(0): Triple buffering? enabled
(**) intel(0): Framebuffer tiled
(**) intel(0): Pixmaps tiled
(**) intel(0): 3D buffers tiled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): video overlay key set to 0x101fe
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output HDMI1
(II) intel(0): Manufacturer: SAM  Model: 90b  Serial#: 1
(II) intel(0): Year: 2011  Week: 42
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 89  vert.: 50
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x864@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) intel(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
(II) intel(0): #2: hsize: 1280  vsize 800  refresh: 60  vid: 129
(II) intel(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) intel(0): #5: hsize: 1600  vsize 900  refresh: 60  vid: 49321
(II) intel(0): #6: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 148.5 MHz   Image Size:  160 x 90 mm
(II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) intel(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 85.5 MHz   Image Size:  160 x 90 mm
(II) intel(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
(II) intel(0): Ranges: V min: 24 V max: 75 Hz, H min: 15 H max: 81 kHz, PixClock max 235 MHz
(II) intel(0): Monitor name: SAMSUNG
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
(II) intel(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
(II) intel(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
(II) intel(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) intel(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
(II) intel(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
(II) intel(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 74.2 MHz   Image Size:  160 x 90 mm
(II) intel(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
(II) intel(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
(II) intel(0): Number of EDID sections to follow: 1
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff004c2d0b0901000000
(II) intel(0): 	2a150103805932780aee91a3544c9926
(II) intel(0): 	0f5054bdef80714f81c0810081809500
(II) intel(0): 	a9c0b3000101023a801871382d40582c
(II) intel(0): 	4500a05a0000001e662156aa51001e30
(II) intel(0): 	468f3300a05a0000001e000000fd0018
(II) intel(0): 	4b0f5117000a202020202020000000fc
(II) intel(0): 	0053414d53554e470a2020202020019b
(II) intel(0): 	020334f14d901f041305140312202122
(II) intel(0): 	07162309070783010000e2000fe30503
(II) intel(0): 	0172030c003000b82d21d0080140073f
(II) intel(0): 	405090a0011d80d0721c1620102c2580
(II) intel(0): 	a05a0000009e011d8018711c1620582c
(II) intel(0): 	2500a05a0000009e011d00bc52d01e20
(II) intel(0): 	b8285540a05a0000001e011d007251d0
(II) intel(0): 	1e206e285500a05a0000001e00000086
(II) intel(0): Printing probed modes for output HDMI1
(II) intel(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
(II) intel(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
(II) intel(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
(II) intel(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
(II) intel(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
(II) intel(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
(II) intel(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
(II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
(II) intel(0): Modeline "1600x900"x60.0  118.96  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
(II) intel(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
(II) intel(0): Modeline "1366x768"x59.8   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
(II) intel(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
(II) intel(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
(II) intel(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
(II) intel(0): Modeline "1440x576i"x50.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
(II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) intel(0): Modeline "1440x480i"x59.9   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) intel(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
(II) intel(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
(II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
(II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output HDMI2
(II) intel(0): EDID for output DP2
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output HDMI1 connected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output HDMI1 using initial mode 1920x1080
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): Kernel page flipping support detected, enabling
(==) intel(0): DPI set to (96, 96)
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.14.0, module version = 1.0.0
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(II) intel(0): [DRI2]   DRI driver: i965
(II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(II)         put_image
(II)         get_image
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder enabled
(II) intel(0): Set up textured video
(II) intel(0): [XvMC] xvmc_vld driver initialized.
(II) intel(0): direct rendering: DRI2 Enabled
(==) intel(0): hotplug detection: "enabled"
(--) RandR disabled
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_INTEL_swap_event
(II) AIGLX: enabled GLX_ARB_create_context
(II) AIGLX: enabled GLX_ARB_create_context_profile
(II) AIGLX: enabled GLX_EXT_create_context_es2_profile
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized i965
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 508 x 285
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.14.0, module version = 2.8.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device Video Bus (/dev/input/event16)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Video Bus'
(**) Video Bus: always reports core events
(**) evdev: Video Bus: Device: "/dev/input/event16"
(--) evdev: Video Bus: Vendor 0 Product 0x6
(--) evdev: Video Bus: Found keys
(II) evdev: Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event0"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event3)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event14)
(**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Receiver'
(**) Logitech USB Receiver: always reports core events
(**) evdev: Logitech USB Receiver: Device: "/dev/input/event14"
(--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
(--) evdev: Logitech USB Receiver: Found keys
(II) evdev: Logitech USB Receiver: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event15)
(**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech USB Receiver'
(**) Logitech USB Receiver: always reports core events
(**) evdev: Logitech USB Receiver: Device: "/dev/input/event15"
(--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
(--) evdev: Logitech USB Receiver: Found 20 mouse buttons
(--) evdev: Logitech USB Receiver: Found scroll wheel(s)
(--) evdev: Logitech USB Receiver: Found relative axes
(--) evdev: Logitech USB Receiver: Found x and y relative axes
(--) evdev: Logitech USB Receiver: Found absolute axes
(II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
(--) evdev: Logitech USB Receiver: Found keys
(II) evdev: Logitech USB Receiver: Configuring as mouse
(II) evdev: Logitech USB Receiver: Configuring as keyboard
(II) evdev: Logitech USB Receiver: Adding scrollwheel support
(**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
(II) evdev: Logitech USB Receiver: initialized for relative axes.
(WW) evdev: Logitech USB Receiver: ignoring absolute axes.
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(**) Logitech USB Receiver: (accel) acceleration factor: 2.000
(**) Logitech USB Receiver: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event13)
(**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
(**) Eee PC WMI hotkeys: always reports core events
(**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event13"
(--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
(--) evdev: Eee PC WMI hotkeys: Found keys
(II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
(II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
(II) config/udev: Adding input device PC Speaker (/dev/input/event2)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) intel(0): EDID vendor "SAM", prod id 2315
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
(II) intel(0): Modeline "1366x768"x0.0   85.50  1366 1436 1579 1792  768 771 774 798 +hsync +vsync (47.7 kHz e)
(II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
(II) intel(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
(II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
(II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
(II) intel(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
(II) intel(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz e)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
(II) intel(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
(II) intel(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
(II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
(II) intel(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
(II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
(II) intel(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
(II) intel(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
(II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
(II) intel(0): Modeline "1920x1080"x0.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
(II) intel(0): Modeline "2880x480"x0.0  108.00  2880 2944 3192 3432  480 489 495 525 -hsync -vsync (31.5 kHz e)
(II) intel(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz e)
(II) intel(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz e)

Offline

#3 2013-04-11 17:01:57

nathan0n5ire
Member
Registered: 2012-10-05
Posts: 9

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

I have the same problem. For me it also hard-freezes the machine if I disable gdm and then startx from the tty with the .xinitrc file set to launch gnome-session

Offline

#4 2013-04-11 17:05:59

tobsen
Member
Registered: 2011-10-13
Posts: 36

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Same here on T420s.

Offline

#5 2013-04-11 17:21:19

Pank
Member
From: IT
Registered: 2009-06-13
Posts: 370

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

I have been seeing similar behavior on my FrankenPad which is a mix of a T60p and a T61p (with Nvidia graphics and the open source drivers).  I'm not sure how to debug it. . .


Arch x64 on Thinkpad X200s/W530

Offline

#6 2013-04-11 17:42:12

kimi2013
Member
From: OÖ/Wels
Registered: 2010-10-12
Posts: 22

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Same here problem, but it will work with slim and .xinitrc exec gnome-session.

gdm 3.6 work



Apr 11 21:21:27 kimi gdm[343]: Failed to give slave programs access to the display. Trying to proceed.
Apr 11 21:21:27 kimi dbus-daemon[339]: dbus[339]: [system] Activating via systemd: service name='org.freedesktop.Accounts' 
Apr 11 21:21:27 kimi dbus[339]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-dae
Apr 11 21:21:27 kimi systemd[1]: Starting Accounts Service...
Apr 11 21:21:27 kimi accounts-daemon[628]: started daemon version 0.6.30
Apr 11 21:21:27 kimi systemd-logind[335]: New session c1 of user gdm.
Apr 11 21:21:27 kimi systemd-logind[335]: Linked /tmp/.X11-unix/X0 to /run/user/120/X11-display.
Apr 11 21:21:27 kimi gdm[343]: GLib: g_variant_compare: assertion `!g_variant_is_container (a)' failed
Apr 11 21:21:27 kimi gdm[343]: GLib: g_variant_compare: assertion `!g_variant_is_container (a)' failed

greetings

kimi

Last edited by kimi2013 (2013-04-11 17:42:54)

Offline

#7 2013-04-11 17:53:38

tobsen
Member
Registered: 2011-10-13
Posts: 36

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

I have a "workaround":
Hitting Ctrl-Alt-F2 like a freak before system freezes. Then log in, startx with a default .xinitrx and switch back to your first VT. Somehow I was able to login with GDM and now I'm afraid to reboot tongue

Offline

#8 2013-04-11 18:09:20

asphantix
Member
Registered: 2012-08-20
Posts: 12

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

kimi2013 wrote:

Same here problem, but it will work with slim and .xinitrc exec gnome-session.

gdm 3.6 work


Same here. With slim all goes fine.

edit:
While I'm currently forced to use Slim I made a minimal Arch Linux theme for it:
IgNlGp4s.png
(the original design idea comes from http://crunchbang.org/forums/viewtopic.php?id=20750)

download it here:
https://docs.google.com/file/d/0BwpJ34S … sp=sharing

Last edited by asphantix (2013-04-12 17:18:24)

Offline

#9 2013-04-11 19:47:15

Jodell
Member
Registered: 2009-10-09
Posts: 285

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

This may be driver related. If you use the intel drivers, try disabling rc6.

Offline

#10 2013-04-11 19:59:24

nathan0n5ire
Member
Registered: 2012-10-05
Posts: 9

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

using slim instead of gdm works for me to, so it must be some bug in gdm 3.8

Offline

#11 2013-04-11 21:42:29

meijin
Member
From: Israel
Registered: 2009-03-05
Posts: 92

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Offline

#12 2013-04-11 23:12:41

Jodell
Member
Registered: 2009-10-09
Posts: 285

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Offline

#13 2013-04-12 00:00:39

mister.wardrop
Member
Registered: 2013-04-11
Posts: 5

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Yeah... that looks right. Glad to see it is an upstream bug. It should receive lots of attention.

Thanks guys smile.

Offline

#14 2013-04-15 13:46:48

parad0x
Member
Registered: 2013-04-11
Posts: 13

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Same problem, I had to install gdm-git because gdm didn't work. (gnome worked only once berfore re-enabling gdm and rebooting)
Now after gdm login to gnome everything freezes (I can't switch to ttyx).

I've disabled my old grub params about i915 rc6, but if that is the problem, it is still enabled by default.
Before gnome3.8 I used the commented params.

title ArchLinux
root   (hd0,0)
kernel /boot/vmlinuz-linux root=/dev/sda1 ro quiet init=/usr/lib/systemd/systemd i915.modeset=1
initrd /boot/initramfs-linux.img
#i915.i915_enable_rc6=7 i915.i915_enable_fbc=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 i915.semaphores=1 

Offline

#15 2013-04-16 16:28:48

kimi2013
Member
From: OÖ/Wels
Registered: 2010-10-12
Posts: 22

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

you can disable rc6  i915.i915_enable_rc6=0 - after this gdm works well.

Offline

#16 2013-04-18 09:25:52

parad0x
Member
Registered: 2013-04-11
Posts: 13

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

thanks.
I'll try to boot with rc6 on any mesa/gdm/kernel update :\
still no luck with linux-3.8.8-1, gdm-3.8.1.1-1,  mesa-9.1.1-1
my poor battery is draning out.

Offline

#17 2013-04-20 09:16:10

yangtsesu
Member
Registered: 2011-08-20
Posts: 26

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

https://bugs.archlinux.org/task/34543
I have provide three mothord to resolved this problem.

Offline

#18 2013-04-22 10:36:32

marcvangend
Member
Registered: 2013-04-22
Posts: 15

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Thank you, tobsen and yangtsesu!
After logging in with the workaround from #7, I was able to apply the first method from #17: switching to SNA acceleration as described in https://wiki.archlinux.org/index.php/In … ion_method. This solved the problem on my Dell XPS L502X machine.

Offline

#19 2013-04-22 10:38:45

wwn
Member
Registered: 2013-03-25
Posts: 68

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

same here t420. very annoying

Offline

#20 2013-04-22 13:00:30

rumpelsepp
Member
From: Bavaria
Registered: 2012-11-13
Posts: 104
Website

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

T520, same here....

edit: Slim works

Last edited by rumpelsepp (2013-04-22 18:37:57)


Every time I see some piece of medical research saying that caffeine is good for you, I high-five myself. Because I'm going to live forever. -- Torvalds, Linus (2010-08-03).

Offline

#21 2013-04-23 08:34:45

Hindol
Member
Registered: 2008-05-07
Posts: 15

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Switching to SNA on Intel worked for me too. Dell Inspiron 15R.

Offline

#22 2013-04-24 11:12:10

rumpelsepp
Member
From: Bavaria
Registered: 2012-11-13
Posts: 104
Website

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Hindol wrote:

Switching to SNA on Intel worked for me too. Dell Inspiron 15R.

Same here: Thinkpad T520


Every time I see some piece of medical research saying that caffeine is good for you, I high-five myself. Because I'm going to live forever. -- Torvalds, Linus (2010-08-03).

Offline

#23 2013-04-24 18:02:37

wwn
Member
Registered: 2013-03-25
Posts: 68

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

rumpelsepp wrote:
Hindol wrote:

Switching to SNA on Intel worked for me too. Dell Inspiron 15R.

Same here: Thinkpad T520

Same here; T420, but breaks bumblebee

Last edited by wwn (2013-04-24 18:25:48)

Offline

#24 2013-04-25 21:56:34

gonr
Member
Registered: 2011-12-07
Posts: 9

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

Same here, wx520. I discovered the following:

If I run "startx", and then "optirun glxspheres", and then I quit x and run "systemctl start gdm", gdm starts without crashing and seems to be ok.  So the graphics card seems to be improperly inialized somehow when starting it from gdm.

This is with "pacman -S intel-dri xf86-video-intel bumblebee nvidia". I also tried uninstalling bumblebee, but gdm crashes then too.

Offline

#25 2013-04-26 12:17:14

lfsevernini
Member
Registered: 2012-03-05
Posts: 2

Re: [GNOME 3.8] GNOME Shell (in GDM or local session) hard-freezes machine

marcvangend wrote:

Thank you, tobsen and yangtsesu!
After logging in with the workaround from #7, I was able to apply the first method from #17: switching to SNA acceleration as described in https://wiki.archlinux.org/index.php/In … ion_method. This solved the problem on my Dell XPS L502X machine.

Thank you all!

I also have an Dell XPS L502X and did what marcvangend, tobsen and yangtsesu told and now my Arch 3.8.8-2-ARCH + gnome 3.8.1-1 + gdm 3.8.1.1-1 + bumblebee 3.2-1 + nvidia 313.30-4 are working fine.

I had gnome 3.6 working on my machine and did an system upgrade using pacman -Syu this week. I didn't have to reinstall all gnome DE.

In summary:
1-First I hit Ctrl-Alt-F2 like a freak before system freezes.
2-In console I run the command systemctl disable gdm, and systemctl enable gdm
3-In console I run the command systemctl start gdm
4-Created /etc/X11/xorg.conf.d/20-intel.conf using SNA acceleration as said in  https://wiki.archlinux.org/index.php/In … ion_method
5-Created /etc/modprobe.d/i915.conf as said in https://wiki.archlinux.org/index.php/In … ng_Options, the final content of file was:
options i915 i915_enable_rc6=0 i915_enable_fbc=1 lvds_downclock=1 semaphores=1
6-Deleted folder /var/log/gdm
6-Reboot

Last edited by lfsevernini (2013-04-26 12:19:54)

Offline

Board footer

Powered by FluxBB