The AMD/ATI Bar & Grill

benf · 2013-04-21 22:55:01

Vi0L0 wrote:

Downgrading linux (and linux-headers) to 3.7.x was a solution for many pxp users.

Hi, I downgraded to kernel version 3.7.4, rebooted, reinstalled catalyst, then rebooted. I recieved this log:

[    67.344] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    67.349] X Protocol Version 11, Revision 0
[    67.351] Build Operating System: Linux 3.8.2-1-ARCH x86_64 
[    67.352] Current Operating System: Linux benarc 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64
[    67.352] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7dfdbd9c-2258-4333-8d1c-8df89d0614c9 ro quiet
[    67.356] Build Date: 09 March 2013  08:45:37AM
[    67.357]  
[    67.357] Current version of pixman: 0.28.2
[    67.358] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    67.358] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    67.361] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 22 22:46:07 2013
[    67.390] (==) Using config file: "/etc/X11/xorg.conf"
[    67.391] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    67.418] (==) ServerLayout "aticonfig Layout"
[    67.419] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    67.419] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    67.419] (**) |   |-->Device "aticonfig-Device[0]-0"
[    67.419] (==) Automatically adding devices
[    67.419] (==) Automatically enabling devices
[    67.419] (==) Automatically adding GPU devices
[    67.447] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    67.447] 	Entry deleted from font path.
[    67.447] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    67.447] 	Entry deleted from font path.
[    67.448] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    67.448] 	Entry deleted from font path.
[    67.448] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    67.448] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    67.448] 	Entry deleted from font path.
[    67.448] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    67.448] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    67.448] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    67.448] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    67.448] (II) Loader magic: 0x7fcc20
[    67.448] (II) Module ABI versions:
[    67.448] 	X.Org ANSI C Emulation: 0.4
[    67.448] 	X.Org Video Driver: 13.1
[    67.448] 	X.Org XInput driver : 18.0
[    67.448] 	X.Org Server Extension : 7.0
[    67.448] (II) config/udev: Adding drm device (/dev/dri/card0)
[    67.450] (--) PCI:*(0:0:2:0) 8086:0166:1028:0572 rev 9, Mem @ 0xc1000000/4194304, 0xb0000000/268435456, I/O @ 0x00004000/64
[    67.450] (--) PCI: (0:1:0:0) 1002:682f:1028:0572 rev 0, Mem @ 0xa0000000/268435456, 0xc0000000/262144, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    67.451] Initializing built-in extension Generic Event Extension
[    67.452] Initializing built-in extension SHAPE
[    67.453] Initializing built-in extension MIT-SHM
[    67.454] Initializing built-in extension XInputExtension
[    67.455] Initializing built-in extension XTEST
[    67.456] Initializing built-in extension BIG-REQUESTS
[    67.457] Initializing built-in extension SYNC
[    67.457] Initializing built-in extension XKEYBOARD
[    67.458] Initializing built-in extension XC-MISC
[    67.458] Initializing built-in extension SECURITY
[    67.459] Initializing built-in extension XINERAMA
[    67.459] Initializing built-in extension XFIXES
[    67.460] Initializing built-in extension RENDER
[    67.460] Initializing built-in extension RANDR
[    67.461] Initializing built-in extension COMPOSITE
[    67.461] Initializing built-in extension DAMAGE
[    67.462] Initializing built-in extension MIT-SCREEN-SAVER
[    67.462] Initializing built-in extension DOUBLE-BUFFER
[    67.463] Initializing built-in extension RECORD
[    67.463] Initializing built-in extension DPMS
[    67.463] Initializing built-in extension X-Resource
[    67.464] Initializing built-in extension XVideo
[    67.464] Initializing built-in extension XVideo-MotionCompensation
[    67.465] Initializing built-in extension XFree86-VidModeExtension
[    67.465] Initializing built-in extension XFree86-DGA
[    67.465] Initializing built-in extension XFree86-DRI
[    67.466] Initializing built-in extension DRI2
[    67.466] (II) "glx" will be loaded by default.
[    67.466] (II) LoadModule: "glx"
[    67.466] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[    67.479] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    67.479] 	compiled for 6.9.0, module version = 1.0.0
[    67.480] Loading extension GLX
[    67.480] (II) LoadModule: "fglrx"
[    67.488] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    67.644] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    67.644] 	compiled for 1.4.99.906, module version = 9.1.11
[    67.644] 	Module class: X.Org Video Driver
[    67.644] (II) Loading sub module "fglrxdrm"
[    67.644] (II) LoadModule: "fglrxdrm"
[    67.645] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    67.661] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    67.661] 	compiled for 1.4.99.906, module version = 9.1.11
[    67.661] (II) AMD Proprietary Linux Driver Version Identifier:9.01.11
[    67.661] (II) AMD Proprietary Linux Driver Release Identifier: 9.012                                
[    67.661] (II) AMD Proprietary Linux Driver Build Date: Dec 19 2012 14:41:10
[    67.661] (++) using VT number 1

[    67.661] (WW) Falling back to old probe method for fglrx
[    67.681] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    67.683] ukiDynamicMajor: failed to open /proc/ati/major
[    67.683] ukiDynamicMajor: failed to open /proc/ati/major
[    67.684] (--) Chipset Supported AMD Graphics Processor (0x682F) found
[    67.692] (II) fglrx: intel VGA device detected, load intel driver.
[    67.692] (II) LoadModule: "intel"
[    67.692] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    67.726] (II) Module intel: vendor="X.Org Foundation"
[    67.726] 	compiled for 1.13.2.901, module version = 2.21.3
[    67.726] 	Module class: X.Org Video Driver
[    67.726] 	ABI class: X.Org Video Driver, version 13.1
[    67.739] (WW) PowerXpress feature is not supported
[    67.739] (EE) this is a Muxless PX A+I platform, we doesn't supported it
[    67.739] (EE) No devices detected.
[    67.739] 
Fatal server error:
[    67.739] no screens found
[    67.739] (EE) 
Please consult the The X.Org Foundation support 
	 at [url]http://wiki.x.org[/url]
 for help. 
[    67.739] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    67.740] (EE)

Last edited by benf (2013-04-21 23:33:34)

lesto · 2013-04-21 23:37:53

Hi,
last test for today.
Radeon module was loaded, so i've balcklisted it. Now X org fail but the systema and the consolle remain active.

the error is "[ 17.823] (WW) fglrx(0): Kernel Module version does *not* match driver.
[ 17.823] (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work"
This is strange as i've installed only one kernel, so i tryed to recompile the module again with
"catalyst_build_module all"
(hook service is disabled now)
and still get the same error. Maybe an old module is found and used? full Xorg.0.log:

[    13.378] 
X.Org X Server 1.13.3
Release Date: 2013-03-07
[    13.378] X Protocol Version 11, Revision 0
[    13.378] Build Operating System: Linux 3.8.2-1-ARCH x86_64 
[    13.378] Current Operating System: Linux localhost 3.8.7-1-ARCH #1 SMP PREEMPT Sat Apr 13 09:01:47 CEST 2013 x86_64
[    13.378] Kernel command line: root=/dev/sda3 ro nomodeset
[    13.378] Build Date: 09 March 2013  08:45:37AM
[    13.378]  
[    13.378] Current version of pixman: 0.28.2
[    13.378] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    13.378] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    13.378] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 22 03:19:53 2013
[    13.544] (==) Using config file: "/etc/X11/xorg.conf"
[    13.544] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    13.608] (==) ServerLayout "aticonfig Layout"
[    13.608] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    13.608] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    13.608] (**) |   |-->Device "aticonfig-Device[0]-0"
[    13.608] (==) Automatically adding devices
[    13.608] (==) Automatically enabling devices
[    13.608] (==) Automatically adding GPU devices
[    13.931] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    13.931] 	Entry deleted from font path.
[    14.137] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    14.137] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.137] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.137] (II) Loader magic: 0x7fcc20
[    14.137] (II) Module ABI versions:
[    14.137] 	X.Org ANSI C Emulation: 0.4
[    14.137] 	X.Org Video Driver: 13.1
[    14.137] 	X.Org XInput driver : 18.0
[    14.137] 	X.Org Server Extension : 7.0
[    14.140] (--) PCI:*(0:1:0:0) 1002:6819:174b:e221 rev 0, Mem @ 0xc0000000/268435456, 0xfea00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    14.140] Initializing built-in extension Generic Event Extension
[    14.140] Initializing built-in extension SHAPE
[    14.140] Initializing built-in extension MIT-SHM
[    14.141] Initializing built-in extension XInputExtension
[    14.141] Initializing built-in extension XTEST
[    14.141] Initializing built-in extension BIG-REQUESTS
[    14.141] Initializing built-in extension SYNC
[    14.141] Initializing built-in extension XKEYBOARD
[    14.141] Initializing built-in extension XC-MISC
[    14.141] Initializing built-in extension SECURITY
[    14.141] Initializing built-in extension XINERAMA
[    14.141] Initializing built-in extension XFIXES
[    14.141] Initializing built-in extension RENDER
[    14.141] Initializing built-in extension RANDR
[    14.141] Initializing built-in extension COMPOSITE
[    14.141] Initializing built-in extension DAMAGE
[    14.141] Initializing built-in extension MIT-SCREEN-SAVER
[    14.141] Initializing built-in extension DOUBLE-BUFFER
[    14.141] Initializing built-in extension RECORD
[    14.141] Initializing built-in extension DPMS
[    14.141] Initializing built-in extension X-Resource
[    14.141] Initializing built-in extension XVideo
[    14.141] Initializing built-in extension XVideo-MotionCompensation
[    14.141] Initializing built-in extension XFree86-VidModeExtension
[    14.141] Initializing built-in extension XFree86-DGA
[    14.141] Initializing built-in extension XFree86-DRI
[    14.141] Initializing built-in extension DRI2
[    14.141] (II) "glx" will be loaded by default.
[    14.141] (II) LoadModule: "glx"
[    14.583] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.668] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    14.668] 	compiled for 6.9.0, module version = 1.0.0
[    14.668] Loading extension GLX
[    14.668] (II) LoadModule: "fglrx"
[    14.684] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    16.799] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    16.799] 	compiled for 1.4.99.906, module version = 9.1.11
[    16.799] 	Module class: X.Org Video Driver
[    16.800] (II) Loading sub module "fglrxdrm"
[    16.800] (II) LoadModule: "fglrxdrm"
[    16.800] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.801] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    16.801] 	compiled for 1.4.99.906, module version = 9.1.11
[    16.801] (II) AMD Proprietary Linux Driver Version Identifier:9.01.11
[    16.801] (II) AMD Proprietary Linux Driver Release Identifier: 9.012                                
[    16.801] (II) AMD Proprietary Linux Driver Build Date: Dec 19 2012 14:41:10
[    16.801] (++) using VT number 7

[    16.804] (WW) Falling back to old probe method for fglrx
[    17.068] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    17.151] ukiDynamicMajor: found major device number 250
[    17.151] ukiDynamicMajor: found major device number 250
[    17.151] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    17.151] ukiOpenDevice: node name is /dev/ati/card0
[    17.151] ukiOpenDevice: open result is 9, (OK)
[    17.274] ukiOpenByBusid: ukiOpenMinor returns 9
[    17.274] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    17.331] (--) Chipset Supported AMD Graphics Processor (0x6819) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:0:2) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:2:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:9:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
[    17.516] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[    17.517] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[    17.517] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    17.525] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    17.525] (II) AMD Video driver is signed
[    17.526] (II) fglrx(0): pEnt->device->identifier=0x17be690
[    17.526] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[    17.526] (II) Loading sub module "vgahw"
[    17.526] (II) LoadModule: "vgahw"
[    17.527] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    17.527] (II) Module vgahw: vendor="X.Org Foundation"
[    17.527] 	compiled for 1.13.3, module version = 0.1.0
[    17.527] 	ABI class: X.Org Video Driver, version 13.1
[    17.527] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    17.527] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    17.527] (==) fglrx(0): Default visual is TrueColor
[    17.527] (**) fglrx(0): Option "DPMS" "true"
[    17.527] (==) fglrx(0): RGB weight 888
[    17.527] (II) fglrx(0): Using 8 bits per RGB 
[    17.527] (==) fglrx(0): Buffer Tiling is ON
[    17.527] (II) Loading sub module "fglrxdrm"
[    17.528] (II) LoadModule: "fglrxdrm"
[    17.528] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    17.528] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    17.528] 	compiled for 1.4.99.906, module version = 9.1.11
[    17.531] ukiDynamicMajor: found major device number 250
[    17.531] ukiDynamicMajor: found major device number 250
[    17.531] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    17.531] ukiOpenDevice: node name is /dev/ati/card0
[    17.531] ukiOpenDevice: open result is 12, (OK)
[    17.531] ukiOpenByBusid: ukiOpenMinor returns 12
[    17.531] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    17.532] (**) fglrx(0): NoAccel = NO
[    17.532] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    17.532] (--) fglrx(0): Chipset: "AMD Radeon HD 7800 Series " (Chipset = 0x6819)
[    17.532] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe221)
[    17.532] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    17.532] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    17.532] (--) fglrx(0): MMIO registers at 0xfea00000
[    17.532] (--) fglrx(0): I/O port at 0x0000e000
[    17.532] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    17.567] (II) fglrx(0): AC Adapter is used
[    17.588] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    17.687] (II) Loading sub module "vbe"
[    17.687] (II) LoadModule: "vbe"
[    17.688] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    17.688] (II) Module vbe: vendor="X.Org Foundation"
[    17.688] 	compiled for 1.13.3, module version = 1.1.0
[    17.688] 	ABI class: X.Org Video Driver, version 13.1
[    17.688] (II) fglrx(0): VESA BIOS detected
[    17.688] (II) fglrx(0): VESA VBE Version 3.0
[    17.688] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    17.688] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[    17.688] (II) fglrx(0): VESA VBE OEM Software Rev: 15.29
[    17.688] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[    17.688] (II) fglrx(0): VESA VBE OEM Product: PITCAIRN
[    17.688] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    17.688] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    17.689] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[    17.689] (II) fglrx(0): PCIE card detected
[    17.689] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    17.689] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    17.689] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[    17.689] (II) fglrx(0): RandR 1.2 support is enabled!
[    17.689] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    17.689] (==) fglrx(0): Center Mode is disabled 
[    17.689] (II) Loading sub module "fb"
[    17.689] (II) LoadModule: "fb"
[    17.689] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.690] (II) Module fb: vendor="X.Org Foundation"
[    17.690] 	compiled for 1.13.3, module version = 1.0.0
[    17.690] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    17.690] (II) Loading sub module "ddc"
[    17.690] (II) LoadModule: "ddc"
[    17.690] (II) Module "ddc" already built-in
[    17.822] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[    17.822] (II) fglrx(0): Output DFP2 has no monitor section
[    17.822] (II) fglrx(0): Output DFP3 has no monitor section
[    17.822] (II) fglrx(0): Output DFP4 has no monitor section
[    17.822] (II) fglrx(0): Output DFP5 has no monitor section
[    17.822] (II) fglrx(0): Output DFP6 has no monitor section
[    17.822] (II) fglrx(0): Output DFP7 has no monitor section
[    17.822] (II) fglrx(0): Output CRT1 has no monitor section
[    17.822] (II) Loading sub module "ddc"
[    17.822] (II) LoadModule: "ddc"
[    17.822] (II) Module "ddc" already built-in
[    17.822] (II) fglrx(0): Connected Display0: DFP7
[    17.822] (II) fglrx(0):  Display0: Failed to get EDID information. 
[    17.822] (II) fglrx(0): EDID for output DFP1
[    17.822] (II) fglrx(0): EDID for output DFP2
[    17.822] (II) fglrx(0): EDID for output DFP3
[    17.822] (II) fglrx(0): EDID for output DFP4
[    17.822] (II) fglrx(0): EDID for output DFP5
[    17.822] (II) fglrx(0): EDID for output DFP6
[    17.822] (II) fglrx(0): EDID for output DFP7
[    17.822] (II) fglrx(0): Manufacturer: SAM  Model: 5cc  Serial#: 1280455220
[    17.822] (II) fglrx(0): Year: 2010  Week: 7
[    17.822] (II) fglrx(0): EDID Version: 1.3
[    17.822] (II) fglrx(0): Digital Display Input
[    17.822] (II) fglrx(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    17.822] (II) fglrx(0): Gamma: 2.20
[    17.822] (II) fglrx(0): DPMS capabilities: Off
[    17.822] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    17.822] (II) fglrx(0): First detailed timing is preferred mode
[    17.822] (II) fglrx(0): redX: 0.649 redY: 0.338   greenX: 0.289 greenY: 0.609
[    17.822] (II) fglrx(0): blueX: 0.146 blueY: 0.070   whiteX: 0.312 whiteY: 0.329
[    17.822] (II) fglrx(0): Supported established timings:
[    17.822] (II) fglrx(0): 640x480@60Hz
[    17.822] (II) fglrx(0): 800x600@56Hz
[    17.822] (II) fglrx(0): 800x600@60Hz
[    17.822] (II) fglrx(0): 1024x768@60Hz
[    17.822] (II) fglrx(0): Manufacturer's mask: 0
[    17.822] (II) fglrx(0): Supported standard timings:
[    17.822] (II) fglrx(0): #0: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    17.822] (II) fglrx(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    17.822] (II) fglrx(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    17.822] (II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    17.822] (II) fglrx(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    17.822] (II) fglrx(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    17.823] (II) fglrx(0): Supported detailed timing:
[    17.823] (II) fglrx(0): clock: 148.5 MHz   Image Size:  530 x 300 mm
[    17.823] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    17.823] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    17.823] (II) fglrx(0): Ranges: V min: 56 V max: 60 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[    17.823] (II) fglrx(0): Monitor name: SyncMaster
[    17.823] (II) fglrx(0): Serial No: H9MZ208542
[    17.823] (II) fglrx(0): EDID (in hex):
[    17.823] (II) fglrx(0): 	00ffffffffffff004c2dcc053432524c
[    17.823] (II) fglrx(0): 	0714010380351e782a6041a6564a9c25
[    17.823] (II) fglrx(0): 	1250542308008100814081809500a940
[    17.823] (II) fglrx(0): 	b30001010101023a801871382d40582c
[    17.823] (II) fglrx(0): 	4500122c2100001e000000fd00383c1e
[    17.823] (II) fglrx(0): 	5111000a202020202020000000fc0053
[    17.823] (II) fglrx(0): 	796e634d61737465720a2020000000ff
[    17.823] (II) fglrx(0): 	0048394d5a3230383534320a20200043
[    17.823] (II) fglrx(0): Printing probed modes for output DFP7
[    17.823] (II) fglrx(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    17.823] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    17.823] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    17.823] (II) fglrx(0): Modeline "1400x1050"x60.0  162.00  1400 1664 1856 2160  1050 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    17.823] (II) fglrx(0): Modeline "1600x900"x60.0  162.00  1600 1664 1856 2160  900 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    17.823] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    17.823] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    17.823] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    17.823] (II) fglrx(0): Modeline "1280x800"x60.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz e)
[    17.823] (II) fglrx(0): Modeline "1280x768"x60.0   83.50  1280 1352 1480 1680  768 803 809 831 -hsync +vsync (49.7 kHz e)
[    17.823] (II) fglrx(0): Modeline "1280x720"x60.0   83.50  1280 1352 1480 1680  720 803 809 831 -hsync +vsync (49.7 kHz e)
[    17.823] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    17.823] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    17.823] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    17.823] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    17.823] (II) fglrx(0): EDID for output CRT1
[    17.823] (II) fglrx(0): Output DFP1 disconnected
[    17.823] (II) fglrx(0): Output DFP2 disconnected
[    17.823] (II) fglrx(0): Output DFP3 disconnected
[    17.823] (II) fglrx(0): Output DFP4 disconnected
[    17.823] (II) fglrx(0): Output DFP5 disconnected
[    17.823] (II) fglrx(0): Output DFP6 disconnected
[    17.823] (II) fglrx(0): Output DFP7 connected
[    17.823] (II) fglrx(0): Output CRT1 disconnected
[    17.823] (II) fglrx(0): Using exact sizes for initial modes
[    17.823] (II) fglrx(0): Output DFP7 using initial mode 1920x1080
[    17.823] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.823] (II) fglrx(0): DPI set to (96, 96)
[    17.823] (II) fglrx(0): Eyefinity capable adapter detected.
[    17.823] (II) fglrx(0): Adapter AMD Radeon HD 7800 Series  has 6 configurable heads and 1 displays connected.
[    17.823] (==) fglrx(0):  PseudoColor visuals disabled
[    17.823] (II) Loading sub module "ramdac"
[    17.823] (II) LoadModule: "ramdac"
[    17.823] (II) Module "ramdac" already built-in
[    17.823] (==) fglrx(0): NoDRI = NO
[    17.823] (==) fglrx(0): Capabilities: 0x00000000
[    17.823] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    17.823] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    17.823] (==) fglrx(0): UseFastTLS=0
[    17.823] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    17.823] (--) Depth 24 pixmap format is 32 bpp
[    17.823] Loading extension ATIFGLRXDRI
[    17.823] (II) fglrx(0): doing swlDriScreenInit
[    17.823] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    17.823] ukiDynamicMajor: found major device number 250
[    17.823] ukiDynamicMajor: found major device number 250
[    17.823] ukiDynamicMajor: found major device number 250
[    17.823] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    17.823] ukiOpenDevice: node name is /dev/ati/card0
[    17.823] ukiOpenDevice: open result is 13, (OK)
[    17.823] ukiOpenByBusid: ukiOpenMinor returns 13
[    17.823] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    17.823] (II) fglrx(0): [uki] DRM interface version 1.0
[    17.823] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    17.823] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    17.823] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7ff8b74f1000
[    17.823] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    17.823] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    17.823] (II) fglrx(0): swlDriScreenInit done
[    17.823] (II) fglrx(0): Kernel Module Version Information:
[    17.823] (II) fglrx(0):     Name: fglrx
[    17.823] (II) fglrx(0):     Version: 12.10.5
[    17.823] (II) fglrx(0):     Date: Mar 20 2013
[    17.823] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    17.823] (WW) fglrx(0): Kernel Module version does *not* match driver.
[    17.823] (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[    17.824] (EE) 
[    17.824] (EE) Backtrace:
[    17.847] (EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x58a336]
[    17.847] (EE) 1: /usr/bin/X (0x400000+0x18e189) [0x58e189]
[    17.848] (EE) 2: /usr/lib/libpthread.so.0 (0x7ff8b683c000+0xf0e0) [0x7ff8b684b0e0]
[    17.848] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (swlDrmFreeSurfaces+0x42) [0x7ff8b3c868d2]
[    17.848] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriCloseScreen+0x14d) [0x7ff8b3c4f99d]
[    17.848] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriScreenInit+0x8ad) [0x7ff8b3c4f05d]
[    17.848] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxScreenInit+0xb46) [0x7ff8b3c49176]
[    17.848] (EE) 7: /usr/bin/X (AddScreen+0x85) [0x4380a5]
[    17.848] (EE) 8: /usr/bin/X (InitOutput+0x3f3) [0x479b13]
[    17.848] (EE) 9: /usr/bin/X (0x400000+0x266e6) [0x4266e6]
[    17.848] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7ff8b56c8a15]
[    17.848] (EE) 11: /usr/bin/X (0x400000+0x26c0d) [0x426c0d]
[    17.848] (EE) 
[    17.848] (EE) Segmentation fault at address 0x888
[    17.848] 
Fatal server error:
[    17.848] Caught signal 11 (Segmentation fault). Server aborting
[    17.848] 
[    17.848] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    17.848] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    17.848] (EE) 
[    17.919] Server terminated with error (1). Closing log file.

Last edited by lesto (2013-04-21 23:38:19)

acgtyrant · 2013-04-22 03:44:29

I'm tired, I give up. I will try open sourece driver. Thank you.

siavashserver · 2013-04-22 03:53:17

acgtyrant wrote:

I'm tired, I give up. I will try open sourece driver. Thank you.

Welcome to the club

alcafar · 2013-04-22 14:51:01

Hi all, I use archlinux since 5 years with no problem on a Nvidia graphic card, but that laptop died and now I have a ATI graphic card on the new laptop. I am not able to make it work even with the open source driver. I posted in another thread, but maybe here is the best place to get some help.
https://bbs.archlinux.org/viewtopic.php?id=161917
Please ask me if other information is needed.
Thank you in advance!

hue · 2013-04-22 15:03:18

Would be glad if someone could help me out here: https://bbs.archlinux.org/viewtopic.php?id=161923

Tried the proprietary drivers for AMD from both Vi0L0's catalyst and catalyst-stable repositories. The desktop effects simply refuse to work. (19 of them don't work)
rm ~/.kde4/share/config/kwinrc didn't work for me. The open source drivers aren't an option for me as I need steam for gaming and don't want my gpu to overheat.
Its a known issue: https://bbs.archlinux.org/viewtopic.php?id=157732
Any solutions?
EDIT: My gpu is 6870 if that helps

This is on KDE 4.10.2. Thanks!

Last edited by hue (2013-04-22 15:04:02)

snack · 2013-04-22 15:33:59

hue wrote:

Would be glad if someone could help me out here: https://bbs.archlinux.org/viewtopic.php?id=161923
Tried the proprietary drivers for AMD from both Vi0L0's catalyst and catalyst-stable repositories. The desktop effects simply refuse to work. (19 of them don't work)
rm ~/.kde4/share/config/kwinrc didn't work for me. The open source drivers aren't an option for me as I need steam for gaming and don't want my gpu to overheat.
Its a known issue: https://bbs.archlinux.org/viewtopic.php?id=157732
Any solutions?
EDIT: My gpu is 6870 if that helps
This is on KDE 4.10.2. Thanks!

This is a known issue with KDE 4.10, and the only solution I'm aware of is deleting ~/.kde4/share/config/kwinrc and restarting plasma. For me, simply killing and restarting plasma works:

$ killall plasma-desktop
$ plasma-destop

The downside is that it doesn't survive a reboot so it has to be done every time you log into KDE.

hue · 2013-04-22 15:41:33

snack wrote:

hue wrote:
Would be glad if someone could help me out here: https://bbs.archlinux.org/viewtopic.php?id=161923
Tried the proprietary drivers for AMD from both Vi0L0's catalyst and catalyst-stable repositories. The desktop effects simply refuse to work. (19 of them don't work)
rm ~/.kde4/share/config/kwinrc didn't work for me. The open source drivers aren't an option for me as I need steam for gaming and don't want my gpu to overheat.
Its a known issue: https://bbs.archlinux.org/viewtopic.php?id=157732
Any solutions?
EDIT: My gpu is 6870 if that helps
This is on KDE 4.10.2. Thanks!
This is a known issue with KDE 4.10, and the only solution I'm aware of is deleting ~/.kde4/share/config/kwinrc and restarting plasma. For me, simply killing and restarting plasma works:
$ killall plasma-desktop
$ plasma-destop
The downside is that it doesn't survive a reboot so it has to be done every time you log into KDE.

I broke my arch installation after updating the kernel and trying to revert to the drivers from the offcial repos. I tried deleting ~/.kde4/share/config/kwinrc and logging out and logging back in but to no avail. Can you check if that works for you? Because if it does, then restarting plasma desktop may not work for me. Also any idea when this might be fixed? Just want to know if its worth the pain of re installing everything again.

Thanks!

snack · 2013-04-22 15:44:39

hue wrote:

I broke my arch installation after updating the kernel and trying to revert to the drivers from the offcial repos. I tried deleting ~/.kde4/share/config/kwinrc and logging out and logging back in but to no avail. Can you check if that works for you? Because if it does, then restarting plasma desktop may not work for me. Also any idea when this might be fixed? Just want to know if its worth the pain of re installing everything again.
Thanks!

I think you should not log out after deleting ~/.kde4/share/config/kwinrc. Try this from a konsole shell:

$ killall plasma-desktop
$ rm ~/.kde4/share/config/kwinrc
$ plasma-desktop

hue · 2013-04-22 15:48:27

snack wrote:

hue wrote:
I broke my arch installation after updating the kernel and trying to revert to the drivers from the offcial repos. I tried deleting ~/.kde4/share/config/kwinrc and logging out and logging back in but to no avail. Can you check if that works for you? Because if it does, then restarting plasma desktop may not work for me. Also any idea when this might be fixed? Just want to know if its worth the pain of re installing everything again.
Thanks!
I think you should not log out after deleting ~/.kde4/share/config/kwinrc. Try this from a konsole shell:
$ killall plasma-desktop
$ rm ~/.kde4/share/config/kwinrc
$ plasma-desktop

I'll have an another go at it then. Installing everything over again sucks because I have like 50 KB/s internet
Cheers

Last edited by hue (2013-04-22 15:48:50)

BotoX · 2013-04-23 20:28:41

BotoX wrote:

I am trying to overclock my monitor from 60 Hz to 80 Hz.
I've achieved this with simple commands with the open source radeon driver:
xrandr --newmode "2560x1440_80.00"  425.00  2560 2760 3040 3520  1440 1443 1448 1510 -hsync +vsync
xrandr --addmode DVI-0 "2560x1440_80.00"
xrandr -r 80
but these do not work with the proprietary driver. It gives me this errormessage:
xrandr --addmode DFP3 "2560x1440_80.00"
    X Error of failed request:  BadMatch (invalid parameter attributes)
      Major opcode of failed request:  141 (RANDR)
      Minor opcode of failed request:  18 (RRAddOutputMode)
      Serial number of failed request:  47
      Current serial number in output stream:  48
Specifying the modeline in the X server config and adding various lines like IgnoreEDID wont help aswell.
Any idea how to get 2560x1440@80Hz working with the catalyst driver? The open source one has no problems.
It lets me set lower refresh rates but that's obviously not what I want. So there's some lock which prevents me on setting higher refresh rates than the ones in the EDID.

Still stuck with this issue.
I also tried the EDID which ToastyX's custom resolution utility generated on windows and had no luck.
I saved it as a raw edid file and put it in /etc/ati/DFP3.edid
The Xorg log showed me that it loaded the file: fglrx(0): Successfully loaded EDID override file
But I still wasn't able to set the new refresh rate in the catalyst control or anywhere else. Only 60 Hz were selectable.
Here's the generated edid file, if it helps: http://www.woabou.eu/files/qnix.edid

I'm really considering the open source driver right now and patching out the pixelclock limit out of that.
Does it still have tearing at video playback (with compositing obv.)?

Last edited by BotoX (2013-04-23 20:29:19)

BitPuffin · 2013-04-24 08:46:23

Hello!

First off before saying anything I want to thank Vi0L0 for his awesome work with maintaining catalyst repos. I appreciate it extremely much!

Now on to my problem:

I discovered yesterday (probably after doing some kind of upgrade with the kernel or something) that when booting the X server seems to hang (it goes black with random darkblue boxes on the screen). SLiM doesn't show up and I can't switch to virtual consoles or anything. I'm using the catalyst package from hd234k (plus utils and lib32) and my video card is Mobility Radeon HD 3400 (unless I'm terribly mistaken, might be 3200). Since I couldn't do anything with the driver I have switched over to the OSS drivers in the mean time so now I can at least do school work. I can't really figure out what the problem is, but here is the full Xorg.0.log:

[    17.314] 
X.Org X Server 1.11.4
Release Date: 2012-01-27
[    17.314] X Protocol Version 11, Revision 0
[    17.314] Build Operating System: Linux 3.3.7-1-ARCH x86_64 
[    17.314] Current Operating System: Linux BernardOhlsson 3.8.8-1-ARCH #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013 x86_64
[    17.314] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f8b3b183-d1f0-454d-83e6-6cc2b339e515 ro quiet
[    17.314] Build Date: 01 June 2012  05:44:06PM
[    17.314]  
[    17.314] Current version of pixman: 0.28.2
[    17.314] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    17.314] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.314] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 24 11:53:57 2013
[    17.394] (==) Using config file: "/etc/X11/xorg.conf"
[    17.394] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    17.459] (==) ServerLayout "aticonfig Layout"
[    17.459] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    17.459] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    17.482] (**) |   |-->Device "aticonfig-Device[0]-0"
[    17.482] (==) Automatically adding devices
[    17.482] (==) Automatically enabling devices
[    17.578] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    17.578] 	Entry deleted from font path.
[    17.628] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    17.628] 	Entry deleted from font path.
[    17.628] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    17.645] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    17.645] 	Entry deleted from font path.
[    17.645] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    17.645] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    17.645] (==) ModulePath set to "/usr/lib/xorg/modules"
[    17.645] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    17.645] (II) Loader magic: 0x7c7ae0
[    17.645] (II) Module ABI versions:
[    17.645] 	X.Org ANSI C Emulation: 0.4
[    17.645] 	X.Org Video Driver: 11.0
[    17.645] 	X.Org XInput driver : 13.0
[    17.645] 	X.Org Server Extension : 6.0
[    17.647] (--) PCI:*(0:1:0:0) 1002:95c4:17aa:2104 rev 0, Mem @ 0xf0000000/134217728, 0xf8000000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
[    17.647] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    17.647] (II) "extmod" will be loaded by default.
[    17.647] (II) "dbe" will be loaded by default.
[    17.647] (II) "glx" will be loaded by default.
[    17.647] (II) "record" will be loaded by default.
[    17.647] (II) "dri" will be loaded by default.
[    17.647] (II) "dri2" will be loaded by default.
[    17.647] (II) LoadModule: "extmod"
[    17.788] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    17.840] (II) Module extmod: vendor="X.Org Foundation"
[    17.840] 	compiled for 1.11.4, module version = 1.0.0
[    17.840] 	Module class: X.Org Server Extension
[    17.840] 	ABI class: X.Org Server Extension, version 6.0
[    17.840] (II) Loading extension MIT-SCREEN-SAVER
[    17.840] (II) Loading extension XFree86-VidModeExtension
[    17.840] (II) Loading extension XFree86-DGA
[    17.840] (II) Loading extension DPMS
[    17.840] (II) Loading extension XVideo
[    17.840] (II) Loading extension XVideo-MotionCompensation
[    17.840] (II) Loading extension X-Resource
[    17.840] (II) LoadModule: "dbe"
[    17.841] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    17.870] (II) Module dbe: vendor="X.Org Foundation"
[    17.870] 	compiled for 1.11.4, module version = 1.0.0
[    17.870] 	Module class: X.Org Server Extension
[    17.870] 	ABI class: X.Org Server Extension, version 6.0
[    17.870] (II) Loading extension DOUBLE-BUFFER
[    17.870] (II) LoadModule: "glx"
[    17.871] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    17.931] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    17.944] 	compiled for 6.9.0, module version = 1.0.0
[    17.944] (II) Loading extension GLX
[    17.944] (II) LoadModule: "record"
[    17.944] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    17.991] (II) Module record: vendor="X.Org Foundation"
[    17.991] 	compiled for 1.11.4, module version = 1.13.0
[    17.991] 	Module class: X.Org Server Extension
[    17.991] 	ABI class: X.Org Server Extension, version 6.0
[    17.991] (II) Loading extension RECORD
[    17.991] (II) LoadModule: "dri"
[    17.991] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    18.017] (II) Module dri: vendor="X.Org Foundation"
[    18.017] 	compiled for 1.11.4, module version = 1.0.0
[    18.017] 	ABI class: X.Org Server Extension, version 6.0
[    18.017] (II) Loading extension XFree86-DRI
[    18.017] (II) LoadModule: "dri2"
[    18.018] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    18.018] (II) Module dri2: vendor="X.Org Foundation"
[    18.018] 	compiled for 1.11.4, module version = 1.2.0
[    18.018] 	ABI class: X.Org Server Extension, version 6.0
[    18.018] (II) Loading extension DRI2
[    18.018] (II) LoadModule: "fglrx"
[    18.019] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    19.335] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    19.367] 	compiled for 1.4.99.906, module version = 8.97.2
[    19.367] 	Module class: X.Org Video Driver
[    19.396] (II) Loading sub module "fglrxdrm"
[    19.396] (II) LoadModule: "fglrxdrm"
[    19.396] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    19.588] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    19.588] 	compiled for 1.4.99.906, module version = 8.97.2
[    19.603] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    19.604] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                           
[    19.604] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[    19.604] (++) using VT number 7

[    19.611] (WW) Falling back to old probe method for fglrx
[    19.785] (II) Loading PCS database from /etc/ati/amdpcsdb
[    19.874] (--) Chipset Supported AMD Graphics Processor (0x95C4) found
[    19.874] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    19.896] (II) AMD Video driver is signed
[    19.897] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    19.897] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    19.897] (II) fglrx(0): pEnt->device->identifier=0x80b340
[    19.897] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[    19.923] (II) Loading sub module "vgahw"
[    19.923] (II) LoadModule: "vgahw"
[    20.027] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    20.037] (II) Module vgahw: vendor="X.Org Foundation"
[    20.037] 	compiled for 1.11.4, module version = 0.1.0
[    20.037] 	ABI class: X.Org Video Driver, version 11.0
[    20.037] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    20.037] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    20.037] (==) fglrx(0): Default visual is TrueColor
[    20.037] (**) fglrx(0): Option "DPMS" "true"
[    20.037] (==) fglrx(0): RGB weight 888
[    20.037] (II) fglrx(0): Using 8 bits per RGB 
[    20.037] (==) fglrx(0): Buffer Tiling is ON
[    20.056] (II) Loading sub module "fglrxdrm"
[    20.056] (II) LoadModule: "fglrxdrm"
[    20.056] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    20.056] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    20.056] 	compiled for 1.4.99.906, module version = 8.97.2
[    20.099] ukiDynamicMajor: failed to open /proc/ati/major
[    20.099] ukiDynamicMajor: failed to open /proc/ati/major
[    20.099] (**) fglrx(0): NoAccel = NO
[    20.099] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    20.099] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
[    20.099] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x2104)
[    20.099] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    20.099] (--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
[    20.099] (--) fglrx(0): MMIO registers at 0xf8000000
[    20.099] (--) fglrx(0): I/O port at 0x00002000
[    20.099] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    20.152] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    20.166] (II) Loading sub module "vbe"
[    20.166] (II) LoadModule: "vbe"
[    20.166] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    20.174] (II) Module vbe: vendor="X.Org Foundation"
[    20.174] 	compiled for 1.11.4, module version = 1.1.0
[    20.174] 	ABI class: X.Org Video Driver, version 11.0
[    20.175] (II) fglrx(0): VESA BIOS detected
[    20.175] (II) fglrx(0): VESA VBE Version 3.0
[    20.175] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    20.175] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    20.175] (II) fglrx(0): VESA VBE OEM Software Rev: 10.88
[    20.175] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    20.175] (II) fglrx(0): VESA VBE OEM Product: M82
[    20.175] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    20.281] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    20.281] (--) fglrx(0): Video RAM: 131072 kByte, Type: DDR3
[    20.281] (II) fglrx(0): PCIE card detected
[    20.281] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    20.281] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    20.281] (WW) fglrx(0): Hasn't establisted DRM connection
[    20.281] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x8000000)
[    20.281] (WW) fglrx(0): No DRM connection for driver fglrx.
[    20.281] (II) fglrx(0): RandR 1.2 support is enabled!
[    20.281] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    20.281] (==) fglrx(0): Center Mode is disabled 
[    20.281] (II) Loading sub module "fb"
[    20.281] (II) LoadModule: "fb"
[    20.281] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.299] (II) Module fb: vendor="X.Org Foundation"
[    20.299] 	compiled for 1.11.4, module version = 1.0.0
[    20.299] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    20.299] (II) Loading sub module "ddc"
[    20.299] (II) LoadModule: "ddc"
[    20.299] (II) Module "ddc" already built-in
[    21.900] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    21.900] (II) fglrx(0): Output DFP1 has no monitor section
[    21.900] (II) fglrx(0): Output DFP2 has no monitor section
[    21.900] (II) fglrx(0): Output CRT1 has no monitor section
[    21.900] (II) Loading sub module "ddc"
[    21.900] (II) LoadModule: "ddc"
[    21.900] (II) Module "ddc" already built-in
[    21.900] (II) fglrx(0): Connected Display0: LVDS
[    21.900] (II) fglrx(0): Display0 EDID data ---------------------------
[    21.900] (II) fglrx(0): Manufacturer: LEN  Model: 4053  Serial#: 0
[    21.900] (II) fglrx(0): Year: 2007  Week: 0
[    21.900] (II) fglrx(0): EDID Version: 1.3
[    21.900] (II) fglrx(0): Digital Display Input
[    21.900] (II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    21.900] (II) fglrx(0): Gamma: 2.20
[    21.900] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    21.900] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.900] (II) fglrx(0): First detailed timing is preferred mode
[    21.900] (II) fglrx(0): redX: 0.569 redY: 0.332   greenX: 0.312 greenY: 0.544
[    21.900] (II) fglrx(0): blueX: 0.149 blueY: 0.132   whiteX: 0.313 whiteY: 0.329
[    21.900] (II) fglrx(0): Manufacturer's mask: 0
[    21.901] (II) fglrx(0): Supported detailed timing:
[    21.901] (II) fglrx(0): clock: 122.0 MHz   Image Size:  331 x 207 mm
[    21.901] (II) fglrx(0): h_active: 1680  h_sync: 1712  h_sync_end 1776 h_blank_end 1904 h_border: 0
[    21.901] (II) fglrx(0): v_active: 1050  v_sync: 1051  v_sync_end 1054 v_blanking: 1066 v_border: 0
[    21.901] (II) fglrx(0): Supported detailed timing:
[    21.901] (II) fglrx(0): clock: 101.7 MHz   Image Size:  331 x 207 mm
[    21.901] (II) fglrx(0): h_active: 1680  h_sync: 1712  h_sync_end 1776 h_blank_end 1904 h_border: 0
[    21.901] (II) fglrx(0): v_active: 1050  v_sync: 1051  v_sync_end 1054 v_blanking: 1066 v_border: 0
[    21.901] (II) fglrx(0): Unknown vendor-specific block f
[    21.901] (II) fglrx(0):  LTN154P3-L02
[    21.901] (II) fglrx(0): EDID (in hex):
[    21.901] (II) fglrx(0): 	00ffffffffffff0030ae534000000000
[    21.901] (II) fglrx(0): 	0011010380211578eacd7591554f8b26
[    21.901] (II) fglrx(0): 	21505400000001010101010101010101
[    21.901] (II) fglrx(0): 	010101010101a82f90e0601a10402040
[    21.901] (II) fglrx(0): 	13004bcf10000019b72790e0601a1040
[    21.901] (II) fglrx(0): 	204013004bcf100000190000000f00b3
[    21.901] (II) fglrx(0): 	0a32b30a281401004ca35033000000fe
[    21.901] (II) fglrx(0): 	004c544e31353450332d4c30320a007e
[    21.901] (II) fglrx(0): End of Display0 EDID data --------------------
[    22.549] (II) fglrx(0): EDID for output LVDS
[    22.549] (II) fglrx(0): Manufacturer: LEN  Model: 4053  Serial#: 0
[    22.549] (II) fglrx(0): Year: 2007  Week: 0
[    22.549] (II) fglrx(0): EDID Version: 1.3
[    22.549] (II) fglrx(0): Digital Display Input
[    22.549] (II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[    22.549] (II) fglrx(0): Gamma: 2.20
[    22.549] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    22.549] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    22.549] (II) fglrx(0): First detailed timing is preferred mode
[    22.549] (II) fglrx(0): redX: 0.569 redY: 0.332   greenX: 0.312 greenY: 0.544
[    22.549] (II) fglrx(0): blueX: 0.149 blueY: 0.132   whiteX: 0.313 whiteY: 0.329
[    22.549] (II) fglrx(0): Manufacturer's mask: 0
[    22.549] (II) fglrx(0): Supported detailed timing:
[    22.549] (II) fglrx(0): clock: 122.0 MHz   Image Size:  331 x 207 mm
[    22.549] (II) fglrx(0): h_active: 1680  h_sync: 1712  h_sync_end 1776 h_blank_end 1904 h_border: 0
[    22.549] (II) fglrx(0): v_active: 1050  v_sync: 1051  v_sync_end 1054 v_blanking: 1066 v_border: 0
[    22.549] (II) fglrx(0): Supported detailed timing:
[    22.549] (II) fglrx(0): clock: 101.7 MHz   Image Size:  331 x 207 mm
[    22.549] (II) fglrx(0): h_active: 1680  h_sync: 1712  h_sync_end 1776 h_blank_end 1904 h_border: 0
[    22.549] (II) fglrx(0): v_active: 1050  v_sync: 1051  v_sync_end 1054 v_blanking: 1066 v_border: 0
[    22.549] (II) fglrx(0): Unknown vendor-specific block f
[    22.549] (II) fglrx(0):  LTN154P3-L02
[    22.549] (II) fglrx(0): EDID (in hex):
[    22.549] (II) fglrx(0): 	00ffffffffffff0030ae534000000000
[    22.549] (II) fglrx(0): 	0011010380211578eacd7591554f8b26
[    22.549] (II) fglrx(0): 	21505400000001010101010101010101
[    22.549] (II) fglrx(0): 	010101010101a82f90e0601a10402040
[    22.549] (II) fglrx(0): 	13004bcf10000019b72790e0601a1040
[    22.549] (II) fglrx(0): 	204013004bcf100000190000000f00b3
[    22.549] (II) fglrx(0): 	0a32b30a281401004ca35033000000fe
[    22.549] (II) fglrx(0): 	004c544e31353450332d4c30320a007e
[    22.549] (II) fglrx(0): EDID vendor "LEN", prod id 16467
[    22.549] (II) fglrx(0): Printing DDC gathered Modelines:
[    22.549] (II) fglrx(0): Modeline "1680x1050"x0.0  122.00  1680 1712 1776 1904  1050 1051 1054 1066 -hsync -vsync (64.1 kHz)
[    22.549] (II) fglrx(0): Modeline "1680x1050"x0.0  101.67  1680 1712 1776 1904  1050 1051 1054 1066 -hsync -vsync (53.4 kHz)
[    22.549] (II) fglrx(0): Printing probed modes for output LVDS
[    22.549] (II) fglrx(0): Modeline "1680x1050"x60.0  122.00  1680 1712 1776 1904  1050 1051 1054 1066 +hsync +vsync (64.1 kHz)
[    22.550] (II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[    22.550] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 +hsync -vsync (55.9 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 -hsync -vsync (60.0 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x800"x60.0   83.46  1280 1344 1480 1680  800 801 804 828 +hsync -vsync (49.7 kHz)
[    22.550] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync -vsync (53.7 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync -vsync (47.8 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 -hsync -vsync (45.0 kHz)
[    22.550] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[    22.550] (II) fglrx(0): Modeline "1024x600"x60.0   53.95  1024 1056 1160 1424  600 600 602 627 -hsync -vsync (37.9 kHz)
[    22.550] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
[    22.550] (II) fglrx(0): Modeline "800x480"x60.0   51.07  800 832 960 1056  480 625 631 806 -hsync -vsync (48.4 kHz)
[    22.550] (II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync -vsync (29.8 kHz)
[    22.550] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 +hsync +vsync (31.5 kHz)
[    22.550] (II) fglrx(0): Modeline "1680x1050"x50.0  101.67  1680 1712 1776 1904  1050 1051 1054 1066 +hsync +vsync (53.4 kHz)
[    22.550] (II) fglrx(0): Modeline "1400x1050"x50.0   99.88  1400 1480 1624 1848  1050 1051 1054 1081 +hsync -vsync (54.0 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x1024"x50.0   89.37  1280 1352 1488 1696  1024 1025 1028 1054 +hsync -vsync (52.7 kHz)
[    22.550] (II) fglrx(0): Modeline "1440x900"x50.0   87.41  1440 1512 1664 1888  900 901 904 926 +hsync -vsync (46.3 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x960"x50.0   82.99  1280 1344 1480 1680  960 961 964 988 +hsync -vsync (49.4 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x800"x50.0   68.55  1280 1336 1472 1664  800 801 804 824 +hsync -vsync (41.2 kHz)
[    22.550] (II) fglrx(0): Modeline "1152x864"x50.0   66.85  1152 1208 1328 1504  864 865 868 889 +hsync -vsync (44.4 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x768"x50.0   65.17  1280 1336 1464 1648  768 769 772 791 +hsync -vsync (39.5 kHz)
[    22.550] (II) fglrx(0): Modeline "1280x720"x50.0   60.46  1280 1328 1456 1632  720 721 724 741 +hsync -vsync (37.0 kHz)
[    22.550] (II) fglrx(0): Modeline "1024x768"x50.0   51.89  1024 1064 1168 1312  768 769 772 791 +hsync -vsync (39.6 kHz)
[    22.550] (II) fglrx(0): Modeline "1024x600"x50.0   39.55  1024 1048 1152 1280  600 601 604 618 +hsync -vsync (30.9 kHz)
[    22.550] (II) fglrx(0): Modeline "800x600"x50.0   31.14  800 824 904 1008  600 601 604 618 +hsync -vsync (30.9 kHz)
[    22.550] (II) fglrx(0): Modeline "800x480"x50.0   24.15  800 808 888 976  480 481 484 495 +hsync -vsync (24.7 kHz)
[    22.550] (II) fglrx(0): Modeline "720x480"x50.0   21.78  720 728 800 880  480 481 484 495 +hsync -vsync (24.8 kHz)
[    22.550] (II) fglrx(0): Modeline "640x480"x50.0   19.40  640 648 712 784  480 481 484 495 +hsync -vsync (24.7 kHz)
[    22.550] (II) fglrx(0): EDID for output DFP1
[    22.550] (II) fglrx(0): EDID for output DFP2
[    22.550] (II) fglrx(0): EDID for output CRT1
[    22.550] (II) fglrx(0): Output LVDS connected
[    22.550] (II) fglrx(0): Output DFP1 disconnected
[    22.550] (II) fglrx(0): Output DFP2 disconnected
[    22.550] (II) fglrx(0): Output CRT1 disconnected
[    22.550] (II) fglrx(0): Using exact sizes for initial modes
[    22.550] (II) fglrx(0): Output LVDS using initial mode 1680x1050
[    22.550] (II) fglrx(0): Display dimensions: (330, 210) mm
[    22.550] (II) fglrx(0): DPI set to (129, 127)
[    22.550] (II) fglrx(0): Adapter ATI Mobility Radeon HD 3400 Series has 2 configurable heads and 1 displays connected.
[    22.550] (==) fglrx(0):  PseudoColor visuals disabled
[    22.550] (II) Loading sub module "ramdac"
[    22.550] (II) LoadModule: "ramdac"
[    22.550] (II) Module "ramdac" already built-in
[    22.550] (==) fglrx(0): NoDRI = NO
[    22.550] (==) fglrx(0): Capabilities: 0x00000000
[    22.550] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    22.550] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    22.550] (==) fglrx(0): UseFastTLS=0
[    22.550] (==) fglrx(0): BlockSignalsOnLock=1
[    22.550] (--) Depth 24 pixmap format is 32 bpp
[    22.552] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
[    22.552] (WW) fglrx(0): ***********************************************************
[    22.552] (WW) fglrx(0): * DRI initialization failed                               *
[    22.552] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[    22.552] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
[    22.552] (WW) fglrx(0): ***********************************************************
[    22.586] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x08000000
[    22.618] (II) fglrx(0): FBMM initialized for area (0,0)-(1728,8191)
[    22.618] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1680) (front color buffer - assumption)
[    22.618] (II) fglrx(0): Largest offscreen area available: 1728 x 6511
[    22.643] (==) fglrx(0): Backing store disabled
[    22.643] (II) Loading extension FGLRXEXTENSION
[    22.643] (**) fglrx(0): DPMS enabled
[    22.643] (II) fglrx(0): Initialized in-driver Xinerama extension
[    22.643] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[    22.643] (II) LoadModule: "glesx"
[    22.643] (II) Loading /usr/lib/xorg/modules/glesx.so
[    22.946] (II) Module glesx: vendor="X.Org Foundation"
[    22.946] 	compiled for 1.4.99.906, module version = 1.0.0
[    22.946] (II) Loading extension GLESX
[    22.946] (II) fglrx(0): GLESX enableFlags = 512
[    22.948] (II) LoadModule: "amdxmm"
[    22.948] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    22.968] (II) Module amdxmm: vendor="X.Org Foundation"
[    22.968] 	compiled for 1.4.99.906, module version = 2.0.0
[    22.968] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0): 
[    22.969] (EE) fglrx(0): XMM failed to initialize
[    22.969] (WW) fglrx(0): No XV video playback available
[    22.969] (II) fglrx(0): Enable composite support successfully
[    22.969] (WW) fglrx(0): Option "VendorName" is not used
[    22.969] (WW) fglrx(0): Option "ModelName" is not used
[    22.969] (==) fglrx(0): Silken mouse enabled
[    22.969] (==) fglrx(0): Using HW cursor of display infrastructure!
[    22.969] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    22.969] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    22.969] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    23.522] (--) RandR disabled
[    23.522] (II) Initializing built-in extension Generic Event Extension
[    23.522] (II) Initializing built-in extension SHAPE
[    23.522] (II) Initializing built-in extension MIT-SHM
[    23.522] (II) Initializing built-in extension XInputExtension
[    23.522] (II) Initializing built-in extension XTEST
[    23.522] (II) Initializing built-in extension BIG-REQUESTS
[    23.522] (II) Initializing built-in extension SYNC
[    23.522] (II) Initializing built-in extension XKEYBOARD
[    23.522] (II) Initializing built-in extension XC-MISC
[    23.522] (II) Initializing built-in extension SECURITY
[    23.522] (II) Initializing built-in extension XINERAMA
[    23.522] (II) Initializing built-in extension XFIXES
[    23.522] (II) Initializing built-in extension RENDER
[    23.522] (II) Initializing built-in extension RANDR
[    23.522] (II) Initializing built-in extension COMPOSITE
[    23.522] (II) Initializing built-in extension DAMAGE
[    23.524] (II) AIGLX: Screen 0 is not DRI capable
[    23.525] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
[    23.647] (II) fglrx(0): Setting screen physical size to 444 x 277
[    24.037] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    24.037] (**) Power Button: Applying InputClass "system-keyboard"
[    24.037] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.037] (II) LoadModule: "evdev"
[    24.037] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.047] (II) Module evdev: vendor="X.Org Foundation"
[    24.047] 	compiled for 1.10.99.902, module version = 2.6.0
[    24.047] 	Module class: X.Org XInput Driver
[    24.047] 	ABI class: X.Org XInput driver, version 13.0
[    24.047] (II) Using input driver 'evdev' for 'Power Button'
[    24.047] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.047] (**) Power Button: always reports core events
[    24.047] (**) Power Button: Device: "/dev/input/event3"
[    24.047] (--) Power Button: Found keys
[    24.047] (II) Power Button: Configuring as keyboard
[    24.047] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    24.047] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.047] (**) Option "xkb_rules" "evdev"
[    24.047] (**) Option "xkb_model" "evdev"
[    24.047] (**) Option "xkb_layout" "se"
[    24.047] (**) Option "xkb_variant" "svdvorak"
[    24.103] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    24.103] (**) Video Bus: Applying InputClass "system-keyboard"
[    24.103] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.103] (II) Using input driver 'evdev' for 'Video Bus'
[    24.103] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.103] (**) Video Bus: always reports core events
[    24.103] (**) Video Bus: Device: "/dev/input/event4"
[    24.103] (--) Video Bus: Found keys
[    24.103] (II) Video Bus: Configuring as keyboard
[    24.103] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input4/event4"
[    24.103] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.103] (**) Option "xkb_rules" "evdev"
[    24.103] (**) Option "xkb_model" "evdev"
[    24.103] (**) Option "xkb_layout" "se"
[    24.103] (**) Option "xkb_variant" "svdvorak"
[    24.103] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    24.103] (II) No input driver specified, ignoring this device.
[    24.103] (II) This device may have been added with another device file.
[    24.103] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    24.103] (**) Sleep Button: Applying InputClass "system-keyboard"
[    24.103] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.103] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.103] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.104] (**) Sleep Button: always reports core events
[    24.104] (**) Sleep Button: Device: "/dev/input/event2"
[    24.104] (--) Sleep Button: Found keys
[    24.104] (II) Sleep Button: Configuring as keyboard
[    24.104] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    24.104] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    24.104] (**) Option "xkb_rules" "evdev"
[    24.104] (**) Option "xkb_model" "evdev"
[    24.104] (**) Option "xkb_layout" "se"
[    24.104] (**) Option "xkb_variant" "svdvorak"
[    24.104] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    24.104] (II) No input driver specified, ignoring this device.
[    24.104] (II) This device may have been added with another device file.
[    24.104] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event10)
[    24.104] (II) No input driver specified, ignoring this device.
[    24.104] (II) This device may have been added with another device file.
[    24.105] (II) config/udev: Adding input device HDA Intel Dock Mic (/dev/input/event7)
[    24.105] (II) No input driver specified, ignoring this device.
[    24.105] (II) This device may have been added with another device file.
[    24.105] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    24.105] (II) No input driver specified, ignoring this device.
[    24.105] (II) This device may have been added with another device file.
[    24.105] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[    24.105] (II) No input driver specified, ignoring this device.
[    24.105] (II) This device may have been added with another device file.
[    24.105] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    24.105] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    24.105] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.105] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.105] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.105] (**) AT Translated Set 2 keyboard: always reports core events
[    24.105] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    24.105] (--) AT Translated Set 2 keyboard: Found keys
[    24.105] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    24.105] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    24.105] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    24.105] (**) Option "xkb_rules" "evdev"
[    24.105] (**) Option "xkb_model" "evdev"
[    24.106] (**) Option "xkb_layout" "se"
[    24.106] (**) Option "xkb_variant" "svdvorak"
[    24.106] (II) config/udev: Adding input device DualPoint Stick (/dev/input/event11)
[    24.106] (**) DualPoint Stick: Applying InputClass "evdev pointer catchall"
[    24.106] (II) Using input driver 'evdev' for 'DualPoint Stick'
[    24.106] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.106] (**) DualPoint Stick: always reports core events
[    24.106] (**) DualPoint Stick: Device: "/dev/input/event11"
[    24.106] (--) DualPoint Stick: Found 3 mouse buttons
[    24.106] (--) DualPoint Stick: Found relative axes
[    24.106] (--) DualPoint Stick: Found x and y relative axes
[    24.106] (II) DualPoint Stick: Configuring as mouse
[    24.106] (**) DualPoint Stick: YAxisMapping: buttons 4 and 5
[    24.106] (**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.106] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[    24.106] (II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE, id 10)
[    24.106] (II) DualPoint Stick: initialized for relative axes.
[    24.106] (**) DualPoint Stick: (accel) keeping acceleration scheme 1
[    24.106] (**) DualPoint Stick: (accel) acceleration profile 0
[    24.106] (**) DualPoint Stick: (accel) acceleration factor: 2.000
[    24.106] (**) DualPoint Stick: (accel) acceleration threshold: 4
[    24.107] (II) config/udev: Adding input device DualPoint Stick (/dev/input/mouse0)
[    24.107] (II) No input driver specified, ignoring this device.
[    24.107] (II) This device may have been added with another device file.
[    24.107] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event12)
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[    24.107] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[    24.107] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: Device: "/dev/input/event12"
[    24.107] (--) AlpsPS/2 ALPS DualPoint TouchPad: Found 3 mouse buttons
[    24.107] (--) AlpsPS/2 ALPS DualPoint TouchPad: Found absolute axes
[    24.107] (--) AlpsPS/2 ALPS DualPoint TouchPad: Found x and y absolute axes
[    24.107] (--) AlpsPS/2 ALPS DualPoint TouchPad: Found absolute touchpad.
[    24.107] (II) AlpsPS/2 ALPS DualPoint TouchPad: Configuring as touchpad
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: YAxisMapping: buttons 4 and 5
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.107] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[    24.107] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 11)
[    24.107] (II) AlpsPS/2 ALPS DualPoint TouchPad: initialized for absolute axes.
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 0
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[    24.107] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[    24.107] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[    24.107] (II) No input driver specified, ignoring this device.
[    24.107] (II) This device may have been added with another device file.
[    24.108] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[    24.108] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[    24.108] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[    24.108] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[    24.108] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.108] (**) ThinkPad Extra Buttons: always reports core events
[    24.108] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[    24.108] (--) ThinkPad Extra Buttons: Found keys
[    24.108] (II) ThinkPad Extra Buttons: Configuring as keyboard
[    24.108] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[    24.108] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[    24.108] (**) Option "xkb_rules" "evdev"
[    24.108] (**) Option "xkb_model" "evdev"
[    24.108] (**) Option "xkb_layout" "se"
[    24.108] (**) Option "xkb_variant" "svdvorak"
[    24.137] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    39.152] (II) Power Button: Close
[    39.491] (II) UnloadModule: "evdev"
[    39.491] (II) Unloading evdev
[    39.496] (II) Video Bus: Close
[    39.496] (II) UnloadModule: "evdev"
[    39.496] (II) Unloading evdev
[    39.500] (II) Sleep Button: Close
[    39.500] (II) UnloadModule: "evdev"
[    39.500] (II) Unloading evdev
[    39.506] (II) AT Translated Set 2 keyboard: Close
[    39.506] (II) UnloadModule: "evdev"
[    39.506] (II) Unloading evdev
[    39.510] (II) DualPoint Stick: Close
[    39.510] (II) UnloadModule: "evdev"
[    39.510] (II) Unloading evdev
[    39.513] (II) AlpsPS/2 ALPS DualPoint TouchPad: Close
[    39.513] (II) UnloadModule: "evdev"
[    39.513] (II) Unloading evdev
[    39.513] (II) ThinkPad Extra Buttons: Close
[    39.513] (II) UnloadModule: "evdev"
[    39.513] (II) Unloading evdev
[    39.566] (EE) fglrx(0): Failed shutdown interrupts. Error -9
[    39.585] SetVBEMode failed
[    39.596] Server terminated successfully (0). Closing log file.

Any help is appreciated! I need the driver for game development.

Cheers

Last edited by BitPuffin (2013-04-24 16:24:53)

SanskritFritz · 2013-04-24 12:14:37

BitPuffin you MUST use [ code ] tags instead of [ quote ]. Please!

snack · 2013-04-24 12:20:21

@BitPuffin: why are you using xorg-server 1.11? I'm using catalyst-hook form repo [catalyst-hd234k] wit xorg-server 1.12.4-1 from [xorg112], and it works fine. Try upgrading xorg-server and see if the problem gets solved.

iScoRp · 2013-04-24 15:06:32

Sorry for my English (i used Google translate).
My graphics card is HD 4650 Mobility. Driver catalyst-lagacy 13.1. Using xorg-1.12. In Gnome 3, process gnome-shell use very much CPU time by simply moving a window or page rendering in the browser (50 - 60%). When using the free drivers this does not occur. But I want to use proprietary driver, because they have better power management and support for hardware video decoding. Please, help solve the problem.

Last edited by iScoRp (2013-04-24 15:07:36)

BitPuffin · 2013-04-24 16:28:55

SanskritFritz: Sorry I was in a slight rush so I didn't have time to check what was preferred, it's fixed now!

snack: I didn't realize that would work, maybe I misread something back when I was looking through the wiki, or maybe it was that I didn't wanna risk it. I'll give it a go tomorrow. Why are you using hook instead of just the default catalyst package?

snack · 2013-04-24 20:50:28

BitPuffin wrote:

snack: I didn't realize that would work, maybe I misread something back when I was looking through the wiki, or maybe it was that I didn't wanna risk it. I'll give it a go tomorrow. Why are you using hook instead of just the default catalyst package?

I'm using hook because I use linux-ck kernel package which is usually ahead of stock Arch kernel, against which catalyst is usually built. Using hook I get automatic module recompilation for all my kernels every time a kernel is updated; it is very useful IMHO, and Vi0l0 did a great job with it (BTW thanks again for your work, man )

ChemBro · 2013-04-24 21:07:46

Damn, why is Violo afk exactly this week?

Also Catalyst 13.4 is out (one day before the next Ubuntu release, who would have thought...).

guibou · 2013-04-25 14:12:52

ChemBro wrote:

Damn, why is Violo afk exactly this week?
Also Catalyst 13.4 is out (one day before the next Ubuntu release, who would have thought...).

With Compute shader support. We are close to opengl 4.3 (one year after its release). Youpi !!!!

BitPuffin · 2013-04-25 19:11:16

snack wrote:

I'm using hook because I use linux-ck kernel package which is usually ahead of stock Arch kernel, against which catalyst is usually built. Using hook I get automatic module recompilation for all my kernels every time a kernel is updated; it is very useful IMHO, and Vi0l0 did a great job with it (BTW thanks again for your work, man )

Ah I see, I'm not that hardcore that I use custom kernels yet Even though I've been using linux for quite some time! BFS seems interesting though. But I'll keep using the regular catalyst package until then.

I wasn't able to try out using a different Xorg server today since internet was down in school (and my tethering internet is too slow and limited for those kind of packages), so I'll hopefully try it out tomorrow!

reed1 · 2013-04-26 12:28:22

Hi Vi0l0, Thanks again for this catalyst repo, looking forward to 13.4 update

MadNoob · 2013-04-26 12:35:43

Hi guys, waiting for Violo, because i read he's away this week, i just edited the catalyst-total pkgbuild to give a try to latest 13.4 drivers...

I'm on a llano notebook (6620G + 6470) and with 13.4 i can switch again to iternal vga without any system freeze.

Can't say a lot about 3D performance because I haven't done any testing.

I hope that Violo will not be offended if I modified the PKGBUILD(x64).

Here's the pkgbuild text if you want to give it a try: (I recommend, however, even if this works, to wait for violo's release for any support)

# CAREFUL: THIS IS NOT THE OFFICIAL VIOLO'S RELEASE

# Maintainer: Vi0L0 <vi0l093@gmail.com>
# Great Contributor: Shen Miren <dickeny@gmail.com> (build_module/hook idea and code)
# Great Contributor: Eduardo "kensai" Romero (previous catalyst and catalyst-utils maintainer)
# Contributor: Manuel Gaul <inkaine@hotmail.com> (previous lib32-catalyst-utils maintainer)
# Contributor: osmano807
# Contributor: csslayer
# Contributor: cyberpatrol
# Contributor: aidanlinz
# Contributor: Rip-Rip
# Contributor: OvsInc
# Contributor: Enverex & kidoz
# Contributor: nob
# Contributor: lordheavy

#PKGEXT='.pkg.tar.gz' # imho time to pack this pkg into tar.xz is too long, unfortunatelly yaourt got problems when ext is different from .pkg.tar.xz - V

pkgname=catalyst-total
pkgver=13.4
pkgrel=0
_amdver=9.012
pkgdesc="AMD/ATI drivers. catalyst-hook + catalyst-utils + lib32-catalyst-utils. Radeons HD 2 3 4 xxx ARE NOT SUPPORTED"
arch=('i686' 'x86_64')
url="http://www.amd.com"
license=('custom')
depends=('linux>=3.0' 'linux<3.9' 'linux-headers' 'xorg-server>=1.7.0' 'xorg-server<1.14.0' 'netkit-bsd-finger' 'libxrandr' 'libsm' 'fontconfig' 'libxcursor' 'libxi' 'gcc-libs' 'gcc>4.0.0' 'make' 'patch' 'libxinerama')
optdepends=('qt: to run ATi Catalyst Control Center (amdcccle)'
	    'libxxf86vm: to run ATi Catalyst Control Center (amdcccle)'
	    'opencl-headers: headers necessary for OpenCL development'
	    'acpid: acpi event support  / atieventsd'
	    'linux-headers: to build the fglrx module for the linux kernel'
	    'linux-lts-headers: to build the fglrx module for the linux-lts kernel')
conflicts=('libgl' 'xf86-video-ati' 'xf86-video-radeonhd' 'ati-dri' 'catalyst-test' 'nvidia-utils' 'nvidia' 'catalyst' 'catalyst-daemon' 'catalyst-generator' 'catalyst-hook' 'catalyst-utils' 'libcl')
provides=('libgl' "libatical=${pkgver}" "catalyst=${pkgver}" "catalyst-utils=${pkgver}" "catalyst-hook=${pkgver}" 'libcl' 'dri' 'libtxc_dxtn')

if [ "${CARCH}" = "x86_64" ]; then
 warning "x86_64 system detected"
 warning "[multilib] repository must be uncommented in /etc/pacman.conf to add lib32-catalyst-utils into the package"
  if [[ `cat /etc/pacman.conf | grep -c "#\[multilib]"` = 0 ]]; then
    warning "OK, lib32-catalyst-utils will be added to the package"
    depends+=('lib32-libxext' 'lib32-libdrm')
    conflicts+=('lib32-libgl' 'lib32-nvidia-utils' 'lib32-catalyst-utils')
    provides+=('lib32-libgl' "lib32-catalyst-utils=${pkgver}" 'lib32-dri' 'lib32-libtxc_dxtn')
      else
	warning "lib32-catalyst-utils will NOT be added to the package"
  fi
fi

install=${pkgname}.install

source=(
    http://www2.ati.com/drivers/linux/amd-catalyst-${pkgver}-linux-x86.x86_64.zip
    catalyst_build_module
    lib32-catalyst.sh
    catalyst.sh
    atieventsd.sh
    atieventsd.service
    catalyst.conf
    arch-fglrx-authatieventsd.patch
    hook-fglrx
    ati_make.sh
    makefile_compat.patch
    catalyst-hook.service)

md5sums=('558bd1b31173b06b25da647a7112e734'
         '769d233666d4353f514b5d7ff035f6b6'
         'af7fb8ee4fc96fd54c5b483e33dc71c4'
         'bdafe749e046bfddee2d1c5e90eabd83'
         'f729bf913613f49b0b9759c246058a87'
         'bccf181a981ff429fe66f6ca5c3ea75a'
         '3e19c2285c76f4cb92108435a1e9c302'
         '4ec9ba4440ec5a320ed3987c1d3b417d'
         '9126e1ef0c724f8b57d3ac0fe77efe2f'
         '62239156a9656c6f41e89a879578925c'
         '3e1b82bd69774ea808da69c983d6a43b'
         'a64e2eae5addc6d670911ccf94b8cda4')

build() {
  ## Unpack archive
     /bin/sh ./amd-catalyst-${pkgver}-linux-x86.x86_64.run --extract archive_files
}

package() {
##catalyst-utils section
  ## Install userspace tools and libraries
    # Create directories
      install -m755 -d ${pkgdir}/etc/ati
      install -m755 -d ${pkgdir}/etc/rc.d
      install -m755 -d ${pkgdir}/etc/profile.d
      install -m755 -d ${pkgdir}/etc/acpi/events
      install -m755 -d ${pkgdir}/etc/security/console.apps
      install -m755 -d ${pkgdir}/etc/OpenCL/vendors

      install -m755 -d ${pkgdir}/usr/lib/xorg/modules/dri
      install -m755 -d ${pkgdir}/usr/lib/xorg/modules/drivers
      install -m755 -d ${pkgdir}/usr/lib/xorg/modules/extensions
      install -m755 -d ${pkgdir}/usr/lib/xorg/modules/extensions/fglrx
      install -m755 -d ${pkgdir}/usr/lib/xorg/modules/linux
      install -m755 -d ${pkgdir}/usr/lib/dri
      install -m755 -d ${pkgdir}/usr/lib/fglrx
      install -m755 -d ${pkgdir}/usr/lib/systemd/system

      install -m755 -d ${pkgdir}/usr/bin
      install -m755 -d ${pkgdir}/usr/sbin

      install -m755 -d ${pkgdir}/usr/include/GL

      install -m755 -d ${pkgdir}/usr/share/applications
      install -m755 -d ${pkgdir}/usr/share/ati/amdcccle
      install -m755 -d ${pkgdir}/usr/share/licenses/${pkgname}
      install -m755 -d ${pkgdir}/usr/share/man/man8
      install -m755 -d ${pkgdir}/usr/share/pixmaps

    # X.org driver
      if [ "${CARCH}" = "i686" ]; then
	cd ${srcdir}/archive_files/xpic/usr/X11R6/lib/modules
      elif [ "${CARCH}" = "x86_64" ]; then
	cd ${srcdir}/archive_files/xpic_64a/usr/X11R6/lib64/modules
      fi

      install -m755 *.so ${pkgdir}/usr/lib/xorg/modules
      install -m755 drivers/*.so ${pkgdir}/usr/lib/xorg/modules/drivers
      install -m755 linux/*.so ${pkgdir}/usr/lib/xorg/modules/linux
      install -m755 extensions/fglrx/fglrx-libglx.so ${pkgdir}/usr/lib/xorg/modules/extensions/fglrx/fglrx-libglx.so
      ln -snf /usr/lib/xorg/modules/extensions/fglrx/fglrx-libglx.so ${pkgdir}/usr/lib/xorg/modules/extensions/libglx.so

    # Controlcenter / libraries
      if [ "${CARCH}" = "i686" ]; then
	cd ${srcdir}/archive_files/arch/x86/usr
	_lib=lib
      elif [ "${CARCH}" = "x86_64" ]; then
	cd ${srcdir}/archive_files/arch/x86_64/usr
	_lib=lib64
      fi

      install -m755 X11R6/bin/* ${pkgdir}/usr/bin
      install -m755 sbin/* ${pkgdir}/usr/sbin
      install -m755 X11R6/${_lib}/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib/fglrx
      ln -snf /usr/lib/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib/fglrx/libGL.so.1.2
      ln -snf /usr/lib/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib/fglrx-libGL.so.1.2
      ln -snf /usr/lib/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib/libGL.so.1.2
      ln -snf /usr/lib/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib/libGL.so.1
      ln -snf /usr/lib/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib/libGL.so
      install -m755 X11R6/${_lib}/libAMDXvBA.so.1.0 ${pkgdir}/usr/lib
      ln -snf libAMDXvBA.so.1.0 ${pkgdir}/usr/lib/libAMDXvBA.so.1
      ln -snf libAMDXvBA.so.1.0 ${pkgdir}/usr/lib/libAMDXvBA.so
      install -m755 X11R6/${_lib}/libatiadlxx.so ${pkgdir}/usr/lib
      install -m755 X11R6/${_lib}/libfglrx_dm.so.1.0 ${pkgdir}/usr/lib
      install -m755 X11R6/${_lib}/libXvBAW.so.1.0 ${pkgdir}/usr/lib
      ln -snf libXvBAW.so.1.0 ${pkgdir}/usr/lib/libXvBAW.so.1
      ln -snf libXvBAW.so.1.0 ${pkgdir}/usr/lib/libXvBAW.so
      install -m644 X11R6/${_lib}/*.a ${pkgdir}/usr/lib
      install -m644 X11R6/${_lib}/*.cap ${pkgdir}/usr/lib
      install -m755 X11R6/${_lib}/modules/dri/*.so ${pkgdir}/usr/lib/xorg/modules/dri
      install -m755 ${_lib}/*.so* ${pkgdir}/usr/lib

    ## QT libs (only 2 files) - un-comment 2 lines below if you don't want to install qt package
#      install -m755 -d ${pkgdir}/usr/share/ati/${_lib}
#      install -m755 share/ati/${_lib}/*.so* ${pkgdir}/usr/share/ati/${_lib}

      ln -snf /usr/lib/xorg/modules/dri/fglrx_dri.so ${pkgdir}/usr/lib/dri/fglrx_dri.so
      ln -snf libfglrx_dm.so.1.0 ${pkgdir}/usr/lib/libfglrx_dm.so.1
      ln -snf libfglrx_dm.so.1.0 ${pkgdir}/usr/lib/libfglrx_dm.so
      ln -snf libatiuki.so.1.0 ${pkgdir}/usr/lib/libatiuki.so.1
      ln -snf libatiuki.so.1.0 ${pkgdir}/usr/lib/libatiuki.so
      ln -snf libOpenCL.so.1 ${pkgdir}/usr/lib/libOpenCL.so


      cd ${srcdir}/archive_files/common
      patch -Np2 -i ${srcdir}/arch-fglrx-authatieventsd.patch
      install -m644 etc/ati/* ${pkgdir}/etc/ati
      chmod 755 ${pkgdir}/etc/ati/authatieventsd.sh

      install -m644 etc/security/console.apps/amdcccle-su ${pkgdir}/etc/security/console.apps

      install -m755 usr/X11R6/bin/* ${pkgdir}/usr/bin
      install -m644 usr/include/GL/*.h ${pkgdir}/usr/include/GL
      install -m755 usr/sbin/*.sh ${pkgdir}/usr/sbin
      install -m644 usr/share/ati/amdcccle/* ${pkgdir}/usr/share/ati/amdcccle
      install -m644 usr/share/icons/*.xpm ${pkgdir}/usr/share/pixmaps
      install -m644 usr/share/man/man8/*.8 ${pkgdir}/usr/share/man/man8
      install -m644 usr/share/applications/*.desktop ${pkgdir}/usr/share/applications

    # ACPI example files
      install -m755 usr/share/doc/fglrx/examples/etc/acpi/*.sh ${pkgdir}/etc/acpi
      sed -i -e "s/usr\/X11R6/usr/g" ${pkgdir}/etc/acpi/ati-powermode.sh
      install -m644 usr/share/doc/fglrx/examples/etc/acpi/events/* ${pkgdir}/etc/acpi/events

    # Add ATI Events Daemon launcher
      install -m755 ${srcdir}/atieventsd.sh ${pkgdir}/etc/rc.d/atieventsd
      install -m644 ${srcdir}/atieventsd.service ${pkgdir}/usr/lib/systemd/system

    # thanks to cerebral, we dont need that damned symlink
      install -m755 ${srcdir}/catalyst.sh ${pkgdir}/etc/profile.d

    # License
      install -m644 ${srcdir}/archive_files/LICENSE.TXT ${pkgdir}/usr/share/licenses/${pkgname}
      install -m644 ${srcdir}/archive_files/common/usr/share/doc/amdcccle/ccc_copyrights.txt \
	${pkgdir}/usr/share/licenses/${pkgname}/amdcccle_copyrights.txt

    # since 11.11 : opencl files
      if [ "${CARCH}" = "i686" ]; then
	cd ${srcdir}/archive_files/arch/x86
	_arc=32
      elif [ "${CARCH}" = "x86_64" ]; then
	cd ${srcdir}/archive_files/arch/x86_64
	_arc=64
      fi

      install -m644 etc/OpenCL/vendors/amdocl${_arc}.icd ${pkgdir}/etc/OpenCL/vendors
      install -m755 usr/bin/clinfo ${pkgdir}/usr/bin
      install -m755 -d ${pkgdir}/etc/modules-load.d
      install -m644 ${srcdir}/catalyst.conf ${pkgdir}/etc/modules-load.d


##catalyst-hook section
      cd ${srcdir}/archive_files
      patch -Np1 -i ../makefile_compat.patch

    # Prepare modules source files
      _archdir=x86_64
      test "${CARCH}" = "i686" && _archdir=x86
      install -m755 -d ${pkgdir}/usr/share/ati/build_mod
      install -m644 common/lib/modules/fglrx/build_mod/*.c \
                ${pkgdir}/usr/share/ati/build_mod
      install -m644 common/lib/modules/fglrx/build_mod/*.h \
                ${pkgdir}/usr/share/ati/build_mod
      install -m644 common/lib/modules/fglrx/build_mod/2.6.x/Makefile \
                ${pkgdir}/usr/share/ati/build_mod
      install -m644 arch/${_archdir}/lib/modules/fglrx/build_mod/libfglrx_ip.a \
                ${pkgdir}/usr/share/ati/build_mod
      install -m755 -d ${pkgdir}/usr/bin
      install -m755 ${srcdir}/catalyst_build_module ${pkgdir}/usr/bin

    # modified ati's make.sh script
      install -m755 ${srcdir}/ati_make.sh ${pkgdir}/usr/share/ati/build_mod

    # hook fglrx
      install -m755 -d ${pkgdir}/usr/lib/initcpio/install
      install -m644 ${srcdir}/hook-fglrx ${pkgdir}/usr/lib/initcpio/install/fglrx

    # systemd service to perform fglrx module build at shutdown
      install -m755 -d ${pkgdir}/usr/lib/systemd/system
      install -m644 ${srcdir}/catalyst-hook.service ${pkgdir}/usr/lib/systemd/system

##lib32-catalyst-utils section
      if [ "${CARCH}" = "x86_64" ] && [[ `cat /etc/pacman.conf | grep -c "#\[multilib]"` = 0 ]]; then
	cd ${srcdir}
	install -D -m755 lib32-catalyst.sh ${pkgdir}/etc/profile.d/lib32-catalyst.sh
	cd ${srcdir}/archive_files/arch/x86/usr
	install -dm755 ${pkgdir}/usr/lib32
	install -dm755 ${pkgdir}/usr/lib32/fglrx
	install -dm755 ${pkgdir}/usr/lib32/xorg/modules/dri
	install -m755 lib/*.so* ${pkgdir}/usr/lib32
	install -m755 X11R6/lib/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib32/fglrx
	ln -sf /usr/lib32/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib32/fglrx/libGL.so.1.2
	ln -sf /usr/lib32/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib32/fglrx-libGL.so.1.2
	ln -sf /usr/lib32/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib32/libGL.so.1.2
	ln -sf /usr/lib32/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib32/libGL.so.1
	ln -sf /usr/lib32/fglrx/fglrx-libGL.so.1.2 ${pkgdir}/usr/lib32/libGL.so
	install -m755 X11R6/lib/libAMDXvBA.so.1.0 ${pkgdir}/usr/lib32
	install -m755 X11R6/lib/libatiadlxx.so ${pkgdir}/usr/lib32
	install -m755 X11R6/lib/libfglrx_dm.so.1.0 ${pkgdir}/usr/lib32
	install -m755 X11R6/lib/libXvBAW.so.1.0 ${pkgdir}/usr/lib32
	install -m755 X11R6/lib/modules/dri/*.so ${pkgdir}/usr/lib32/xorg/modules/dri
	ln -snf /usr/lib32/xorg/modules/dri ${pkgdir}/usr/lib32/dri

	cd $pkgdir/usr/lib32
	ln -sf libfglrx_dm.so.1.0 libfglrx_dm.so.1
	ln -sf libAMDXvBA.so.1.0 libAMDXvBA.so.1
	ln -sf libXvBAW.so.1.0 libXvBAW.so.1
	ln -sf libatiuki.so.1.0 libatiuki.so.1
	ln -sf libatiuki.so.1.0 libatiuki.so
	ln -sf libOpenCL.so.1 libOpenCL.so

	# OpenCL
	install -m755 -d ${pkgdir}/etc/OpenCL/vendors
	install -m644 ${srcdir}/archive_files/arch/x86/etc/OpenCL/vendors/amdocl32.icd ${pkgdir}/etc/OpenCL/vendors
      fi
}

Last edited by MadNoob (2013-04-26 12:40:14)

guibou · 2013-04-26 14:45:52

MadNoob wrote:

Here's the pkgbuild text if you want to give it a try: (I recommend, however, even if this works, to wait for violo's release for any support)

I did roughly the same thing and did not notice any issue. I was able to play games with a usual framerate. The usual glitch of the beta version (i.e. no brightness setting) are not present. I was also able to run GL 4.3 code (compute shader and shader buffer storage mainly) without too much issue.

Alastor · 2013-04-27 08:42:06

I have also tried Catalyst 13.4 with PKGBUILD of MadNoob and succesfully installed the module without errors... However, I have a problem with catalyst. I have ad AMD Radeon HD 7500M and I have installed xvba video from Viol0's repository but hardware acceleration for videos doesn't work. When I hopen a video encoded with h264 for example, if I check "use hardware accelleration" in VLC my system freeze and I have to force reboot it. Can someone help me ? Thanks.

high.entropy · 2013-04-27 11:01:44

ChemBro wrote:

Damn, why is Violo afk exactly this week?

Let's look on the bright side of it: Disappointment is postponed to next week.

Arch Linux

#5176 2013-04-21 22:55:01

Re: The AMD/ATI Bar & Grill

#5177 2013-04-21 23:37:53

Re: The AMD/ATI Bar & Grill

#5178 2013-04-22 03:44:29

Re: The AMD/ATI Bar & Grill

#5179 2013-04-22 03:53:17

Re: The AMD/ATI Bar & Grill

#5180 2013-04-22 14:51:01

Re: The AMD/ATI Bar & Grill

#5181 2013-04-22 15:03:18

Re: The AMD/ATI Bar & Grill

#5182 2013-04-22 15:33:59

Re: The AMD/ATI Bar & Grill

#5183 2013-04-22 15:41:33

Re: The AMD/ATI Bar & Grill

#5184 2013-04-22 15:44:39

Re: The AMD/ATI Bar & Grill

#5185 2013-04-22 15:48:27

Re: The AMD/ATI Bar & Grill

#5186 2013-04-23 20:28:41

Re: The AMD/ATI Bar & Grill

#5187 2013-04-24 08:46:23

Re: The AMD/ATI Bar & Grill

#5188 2013-04-24 12:14:37

Re: The AMD/ATI Bar & Grill

#5189 2013-04-24 12:20:21

Re: The AMD/ATI Bar & Grill

#5190 2013-04-24 15:06:32

Re: The AMD/ATI Bar & Grill

#5191 2013-04-24 16:28:55

Re: The AMD/ATI Bar & Grill

#5192 2013-04-24 20:50:28

Re: The AMD/ATI Bar & Grill

#5193 2013-04-24 21:07:46

Re: The AMD/ATI Bar & Grill

#5194 2013-04-25 14:12:52

Re: The AMD/ATI Bar & Grill

#5195 2013-04-25 19:11:16

Re: The AMD/ATI Bar & Grill

#5196 2013-04-26 12:28:22

Re: The AMD/ATI Bar & Grill

#5197 2013-04-26 12:35:43

Re: The AMD/ATI Bar & Grill

#5198 2013-04-26 14:45:52

Re: The AMD/ATI Bar & Grill

#5199 2013-04-27 08:42:06

Re: The AMD/ATI Bar & Grill

#5200 2013-04-27 11:01:44

Re: The AMD/ATI Bar & Grill

Board footer