You are not logged in.

Pages: 1 … 208 209 210 211 212 … 307

Topic closed

#5226 2013-04-29 14:30:08

snack
Member
From: Italy
Registered: 2009-01-13
Posts: 874

Re: The AMD/ATI Bar & Grill

BitPuffin wrote:
snack wrote:
BitPuffin wrote:

Shouldn't catalyst from hd234k also work with xorg113? The wiki says < 12.10 doesn't support 1.13. But the one in hd234k is catalyst 13.1. So doesn't that work with xorg 1.13?

Catalyst legacy a.k.a. hd234k doesn't work with xorg-server >1.12, while standard catalyst does. Don't be confused by versione numbers: same version numbers for standard and legacy drivers don't mean same features, especially xorg-server support.

Well then shouldn't the wiki be updated to say that catalyst <13.1 doesn't work with xorg 1.12 instead of catalyst 12.1?

I see the relevant section under "Installing the driver" in the wiki: effectively, it says that legacy driver is not compatible with xorg-server 1.14, and has instructions to roll back to 1.13. AFAIK, this is true for regular catalyst, not for legacy, and in fact my catalyst-utils from hd234k repo depends on xorg-server<1.13. The wiki probably needs an update...

Offline

#5227 2013-04-29 14:37:10

woznme
Member
From: Gold Coast, AU
Registered: 2013-01-13
Posts: 22

Re: The AMD/ATI Bar & Grill

snack wrote:
woznme wrote:

I've got a little issue I am hoping someone can help me with. today my updates showed up catalyst-utils lib32-catalyst-utils on the AUR. I am getting failures installing them. It seems my versions are all over the place.

catalyst-dkms 13.1-2
catalyst-hook 13.4-1
catalyst-utils 13.1-5
lib32-catalyst-utils 13.1-2

Never used catalyst-dkms but I think that it conflicts with catalyst-hook (AFAIK both provide fglx module). Remove catalyst-dkms and reinstall catalyst-hook. BTW there's some missing conflict in some PKGBUILD...

Thanks, removed dkms and reinstalled hook.  Still get the : lib32-catalyst-utils: requires catalyst-utils=13.1 fail when trying to install catalyst-utils 13.4.1 update.  I'll leave dkms off if I don't need it, thanks.

for the lib32-catalyst-utils 13.4-1 update i get this fail. Strangely i've never had any problems in the past with the Ati drivers

looking for inter-conflicts...

Packages (1): lib32-catalyst-utils-13.4-1

Total Installed Size:   103.54 MiB
Net Upgrade Size:       35.40 MiB

:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring                                                          [##################################################] 100%
(1/1) checking package integrity                                                        [##################################################] 100%
(1/1) loading package files                                                             [##################################################] 100%
(1/1) checking for file conflicts                                                       [##################################################] 100%
error: failed to commit transaction (conflicting fileslib32-catalyst-utils: /usr/lib32/libXvBAW.so.1 exists in filesystem
Errors occurred, no packages were upgraded.

Last edited by woznme (2013-04-29 14:43:00)

Offline

#5228 2013-04-29 14:47:44

snack
Member
From: Italy
Registered: 2009-01-13
Posts: 874

Re: The AMD/ATI Bar & Grill

woznme, I think you screwed your system a bit by mixing dkms packages from official repos with those from Vi0l0's repos. Try to remove with pacman all catalyst packages in your system (dkms, hook, utils, lib32), then be sure you placed the catalyst and xorg repos above any other repo in /etc/pacman.conf. Then install catalyst-hook, catalyst-utils and lib32-catalyst-utils, eventually removing any already present file that pacman complains about.

Offline

#5229 2013-04-29 15:11:01

PaulStogov
Member
From: Saint-Petersburg, Russia
Registered: 2009-12-26
Posts: 26

Re: The AMD/ATI Bar & Grill

high.entropy wrote:
episyron wrote:

Virtual terminals disappeared with catalyst 13.4 (catalyst-total from AUR), just a blank screen. Could not even come back to X. I have HD 5770 connected to a monitor through HDMI. Anyone else experiencing this new feature?

Yes, VTs seem to be still an issue...

With 13.4 I've got the problem switching to VT with this in Xorg.0.log: 

(EE) fglrx(0): Failed to get ConsoleMode

So I tried to use uvesafb according to this https://wiki.archlinux.org/index.php/Framebuffer and now I have working VTs despite the error in Xorg.log is still there.

Asus N61J/ATi Radeon HD5730
Toshiba A200/ATi Radeon HD2600

Offline

#5230 2013-04-29 15:31:16

Anon11
Member
Registered: 2012-05-20
Posts: 36

Re: The AMD/ATI Bar & Grill

IVIonty wrote:

So atm with Catalyst 13.4 + Xorg 1.13 my A8 system seems to work fine: no more kernel panic at shutdown/reboot, no mode problems with virtual terminals switching.

I still have the brightness bug with latest catalyst ( laptop backlight only changes after trying many times and it only changes between some random levels )
but its manageable

Offline

#5231 2013-04-29 15:48:23

PaulStogov
Member
From: Saint-Petersburg, Russia
Registered: 2009-12-26
Posts: 26

Re: The AMD/ATI Bar & Grill

Anon11 wrote:
IVIonty wrote:

So atm with Catalyst 13.4 + Xorg 1.13 my A8 system seems to work fine: no more kernel panic at shutdown/reboot, no mode problems with virtual terminals switching.

I still have the brightness bug with latest catalyst ( laptop backlight only changes after trying many times and it only changes between some random levels )
but its manageable

Maybe this it a Vari-Bright issue? screenshot-04292013-074505pm.php

Asus N61J/ATi Radeon HD5730
Toshiba A200/ATi Radeon HD2600

Offline

#5232 2013-04-29 17:07:12

Unia
Member
From: Stockholm, Sweden
Registered: 2010-03-30
Posts: 2,486
Website

Re: The AMD/ATI Bar & Grill

snack wrote:
BitPuffin wrote:
snack wrote:

Catalyst legacy a.k.a. hd234k doesn't work with xorg-server >1.12, while standard catalyst does. Don't be confused by versione numbers: same version numbers for standard and legacy drivers don't mean same features, especially xorg-server support.

Well then shouldn't the wiki be updated to say that catalyst <13.1 doesn't work with xorg 1.12 instead of catalyst 12.1?

I see the relevant section under "Installing the driver" in the wiki: effectively, it says that legacy driver is not compatible with xorg-server 1.14, and has instructions to roll back to 1.13. AFAIK, this is true for regular catalyst, not for legacy, and in fact my catalyst-utils from hd234k repo depends on xorg-server<1.13. The wiki probably needs an update...

I have updated the wiki, please see the this change and this one. Is it oke now?

If you can't sit by a cozy fire with your code in hand enjoying its simplicity and clarity, it needs more work. --Carlos Torres

Offline

#5233 2013-04-29 18:08:14

mityukov
Member
Registered: 2010-10-10
Posts: 66

Re: The AMD/ATI Bar & Grill

Just wandering: is it Ok that aticonfig wants me to restart Xserver after I toggle between Discreet and Integral GPU?

$ sudo aticonfig --px-dgpu
No protocol specified
PowerXpress: Discrete GPU is selected (High-Performance mode), please restart Xserver(s) for changes to take effect!

.. I thought it should be possible to switch between them depending on whether the book is on Battery or on DC. hmm

Last edited by mityukov (2013-04-29 19:26:50)

Offline

#5234 2013-04-29 18:18:44

mityukov
Member
Registered: 2010-10-10
Posts: 66

Re: The AMD/ATI Bar & Grill

Anon11 wrote:

I still have the brightness bug with latest catalyst ( laptop backlight only changes after trying many times and it only changes between some random levels )

Have the same issue on the my system (catalyst/catalyst-hook + catalyst/catalyst-utils-pxp + catalyst/lib32-catalyst-utils-pxp).

but its manageable

Plz tell me how smile

Offline

#5235 2013-04-29 19:51:45

jkrause
Member
Registered: 2013-04-29
Posts: 2

Re: The AMD/ATI Bar & Grill

Segmentation fault with catalyst-hook-13.4-1-x86_64.
I downgraded to catalyst-hook-13.3-10-x86_64, which works fine for me.

Kernel is 3.8.10-1-ARCH. Any idea?

[    14.053] 
X.Org X Server 1.13.4
Release Date: 2013-04-17
[    14.053] X Protocol Version 11, Revision 0
[    14.053] Build Operating System: Linux 3.8.10-1-ARCH x86_64 
[    14.053] Current Operating System: Linux timelineX 3.8.10-1-ARCH #1 SMP PREEMPT Sat Apr 27 12:36:59 CEST 2013 x86_64
[    14.053] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f4c7aa08-ef83-4006-80ee-9cb497d79846 ro splash nomodeset
[    14.053] Build Date: 28 April 2013  01:19:17PM
[    14.053]  
[    14.053] Current version of pixman: 0.28.2
[    14.053] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.053] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.053] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 29 21:25:37 2013
[    14.146] (==) Using config file: "/etc/X11/xorg.conf"
[    14.146] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.301] (==) ServerLayout "aticonfig Layout"
[    14.301] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    14.301] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    14.301] (**) |   |-->Device "aticonfig-Device[0]-0"
[    14.301] (==) Automatically adding devices
[    14.301] (==) Automatically enabling devices
[    14.301] (==) Automatically adding GPU devices
[    14.477] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.477] 	Entry deleted from font path.
[    14.575] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    14.575] 	Entry deleted from font path.
[    14.575] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    14.597] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    14.597] 	Entry deleted from font path.
[    14.597] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    14.597] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    14.597] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.597] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.629] (II) Loader magic: 0x7fbc20
[    14.629] (II) Module ABI versions:
[    14.629] 	X.Org ANSI C Emulation: 0.4
[    14.629] 	X.Org Video Driver: 13.1
[    14.629] 	X.Org XInput driver : 18.0
[    14.629] 	X.Org Server Extension : 7.0
[    14.631] (--) PCI:*(0:1:0:0) 1002:68c1:1025:035c rev 0, Mem @ 0xc0000000/134217728, 0xcc000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    14.664] Initializing built-in extension Generic Event Extension
[    14.664] Initializing built-in extension SHAPE
[    14.664] Initializing built-in extension MIT-SHM
[    14.664] Initializing built-in extension XInputExtension
[    14.665] Initializing built-in extension XTEST
[    14.665] Initializing built-in extension BIG-REQUESTS
[    14.665] Initializing built-in extension SYNC
[    14.665] Initializing built-in extension XKEYBOARD
[    14.665] Initializing built-in extension XC-MISC
[    14.665] Initializing built-in extension SECURITY
[    14.665] Initializing built-in extension XINERAMA
[    14.665] Initializing built-in extension XFIXES
[    14.665] Initializing built-in extension RENDER
[    14.665] Initializing built-in extension RANDR
[    14.665] Initializing built-in extension COMPOSITE
[    14.665] Initializing built-in extension DAMAGE
[    14.665] Initializing built-in extension MIT-SCREEN-SAVER
[    14.665] Initializing built-in extension DOUBLE-BUFFER
[    14.665] Initializing built-in extension RECORD
[    14.665] Initializing built-in extension DPMS
[    14.665] Initializing built-in extension X-Resource
[    14.665] Initializing built-in extension XVideo
[    14.665] Initializing built-in extension XVideo-MotionCompensation
[    14.665] Initializing built-in extension XFree86-VidModeExtension
[    14.665] Initializing built-in extension XFree86-DGA
[    14.665] Initializing built-in extension XFree86-DRI
[    14.665] Initializing built-in extension DRI2
[    14.665] (II) "glx" will be loaded by default.
[    14.665] (II) LoadModule: "glx"
[    14.746] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.839] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    14.839] 	compiled for 6.9.0, module version = 1.0.0
[    14.840] Loading extension GLX
[    14.840] (II) LoadModule: "fglrx"
[    14.877] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    16.041] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    16.041] 	compiled for 1.4.99.906, module version = 12.10.5
[    16.041] 	Module class: X.Org Video Driver
[    16.057] (II) Loading sub module "fglrxdrm"
[    16.057] (II) LoadModule: "fglrxdrm"
[    16.057] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.212] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    16.212] 	compiled for 1.4.99.906, module version = 12.10.5
[    16.212] (II) AMD Proprietary Linux Driver Version Identifier:12.10.05
[    16.212] (II) AMD Proprietary Linux Driver Release Identifier: 12.104                               
[    16.212] (II) AMD Proprietary Linux Driver Build Date: Mar 28 2013 21:07:25
[    16.212] (++) using VT number 7

[    16.405] (WW) Falling back to old probe method for fglrx
[    16.504] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    16.518] ukiDynamicMajor: found major device number 250
[    16.518] ukiDynamicMajor: found major device number 250
[    16.518] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.518] ukiOpenDevice: node name is /dev/ati/card0
[    16.518] ukiOpenDevice: open result is 12, (OK)
[    16.646] ukiOpenDevice: open result is 12, (OK)
[    16.646] ukiOpenByBusid: ukiOpenMinor returns 12
[    16.646] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    16.657] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[    16.670] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    16.670] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    16.683] (II) AMD Video driver is signed
[    16.683] (II) fglrx(0): pEnt->device->identifier=0x22e3670
[    16.684] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[    16.684] (II) Loading sub module "vgahw"
[    16.684] (II) LoadModule: "vgahw"
[    16.684] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    16.695] (II) Module vgahw: vendor="X.Org Foundation"
[    16.695] 	compiled for 1.13.4, module version = 0.1.0
[    16.695] 	ABI class: X.Org Video Driver, version 13.1
[    16.695] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    16.695] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    16.695] (==) fglrx(0): Default visual is TrueColor
[    16.695] (**) fglrx(0): Option "DPMS" "true"
[    16.695] (==) fglrx(0): RGB weight 888
[    16.695] (II) fglrx(0): Using 8 bits per RGB 
[    16.696] (==) fglrx(0): Buffer Tiling is ON
[    16.696] (II) Loading sub module "fglrxdrm"
[    16.696] (II) LoadModule: "fglrxdrm"
[    16.696] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.696] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    16.696] 	compiled for 1.4.99.906, module version = 12.10.5
[    16.698] ukiDynamicMajor: found major device number 250
[    16.698] ukiDynamicMajor: found major device number 250
[    16.698] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.698] ukiOpenDevice: node name is /dev/ati/card0
[    16.698] ukiOpenDevice: open result is 15, (OK)
[    16.698] ukiOpenByBusid: ukiOpenMinor returns 15
[    16.698] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    16.699] (**) fglrx(0): NoAccel = NO
[    16.699] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    16.699] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[    16.699] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x035c)
[    16.699] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    16.699] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    16.699] (--) fglrx(0): MMIO registers at 0xcc000000
[    16.699] (--) fglrx(0): I/O port at 0x00003000
[    16.699] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    16.712] (II) fglrx(0): AC Adapter is used
[    16.712] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    16.712] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    16.712] (II) fglrx(0): PCIE card detected
[    16.713] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    16.713] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    16.713] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    16.713] (II) fglrx(0): RandR 1.2 support is enabled!
[    16.713] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    16.713] (==) fglrx(0): Center Mode is disabled 
[    16.713] (II) Loading sub module "fb"
[    16.713] (II) LoadModule: "fb"
[    16.738] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.747] (II) Module fb: vendor="X.Org Foundation"
[    16.747] 	compiled for 1.13.4, module version = 1.0.0
[    16.747] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.747] (II) Loading sub module "ddc"
[    16.747] (II) LoadModule: "ddc"
[    16.747] (II) Module "ddc" already built-in
[    16.922] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    16.922] (II) fglrx(0): Output DFP1 has no monitor section
[    16.922] (II) fglrx(0): Output CRT1 has no monitor section
[    16.922] (II) Loading sub module "ddc"
[    16.922] (II) LoadModule: "ddc"
[    16.922] (II) Module "ddc" already built-in
[    16.922] (II) fglrx(0): Connected Display0: LVDS
[    16.922] (II) fglrx(0):  Display0: Failed to get EDID information. 
[    16.923] (II) fglrx(0): EDID for output LVDS
[    16.923] (II) fglrx(0): Manufacturer: SEC  Model: 3030  Serial#: 0
[    16.923] (II) fglrx(0): Year: 2009  Week: 0
[    16.923] (II) fglrx(0): EDID Version: 1.3
[    16.923] (II) fglrx(0): Digital Display Input
[    16.923] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 21
[    16.923] (II) fglrx(0): Gamma: 2.20
[    16.923] (II) fglrx(0): No DPMS capabilities specified
[    16.923] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.923] (II) fglrx(0): First detailed timing is preferred mode
[    16.923] (II) fglrx(0): redX: 0.585 redY: 0.341   greenX: 0.352 greenY: 0.578
[    16.923] (II) fglrx(0): blueX: 0.151 blueY: 0.113   whiteX: 0.313 whiteY: 0.329
[    16.923] (II) fglrx(0): Manufacturer's mask: 0
[    16.923] (II) fglrx(0): Supported detailed timing:
[    16.924] (II) fglrx(0): clock: 75.2 MHz   Image Size:  344 x 194 mm
[    16.924] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1586 h_border: 0
[    16.924] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    16.924] (II) fglrx(0): Unknown vendor-specific block f
[    16.924] (II) fglrx(0):  SAMSUNG
[    16.924] (II) fglrx(0):  156AT11-A01
[    16.924] (II) fglrx(0): EDID (in hex):
[    16.924] (II) fglrx(0): 	00ffffffffffff004ca3303000000000
[    16.924] (II) fglrx(0): 	00130103802415780ad0c595575a9426
[    16.924] (II) fglrx(0): 	1d505400000001010101010101010101
[    16.924] (II) fglrx(0): 	0101010101015e1d56dc500016303020
[    16.924] (II) fglrx(0): 	250058c2100000190000000f00000000
[    16.924] (II) fglrx(0): 	00000000001eb4027400000000fe0053
[    16.924] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    16.924] (II) fglrx(0): 	00313536415431312d4130310a20005d
[    16.924] (II) fglrx(0): EDID vendor "SEC", prod id 12336
[    16.924] (II) fglrx(0): Printing DDC gathered Modelines:
[    16.924] (II) fglrx(0): Modeline "1366x768"x0.0   75.18  1366 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    16.924] (II) fglrx(0): Printing probed modes for output LVDS
[    16.924] (II) fglrx(0): Modeline "1366x768"x60.0   75.18  1366 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    16.924] (II) fglrx(0): Modeline "1360x768"x60.0   75.18  1360 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1280x768"x60.0   75.18  1280 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1280x720"x60.0   75.18  1280 1414 1446 1586  720 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1024x768"x60.0   75.18  1024 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1024x600"x60.0   75.18  1024 1414 1446 1586  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "800x600"x60.0   75.18  800 1414 1446 1586  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "800x480"x60.0   75.18  800 1414 1446 1586  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "640x480"x60.0   75.18  640 1414 1446 1586  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): EDID for output DFP1
[    16.924] (II) fglrx(0): EDID for output CRT1
[    16.924] (II) fglrx(0): Output LVDS connected
[    16.924] (II) fglrx(0): Output DFP1 disconnected
[    16.924] (II) fglrx(0): Output CRT1 disconnected
[    16.924] (II) fglrx(0): Using exact sizes for initial modes
[    16.924] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    16.924] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.924] (II) fglrx(0): Display dimensions: (360, 210) mm
[    16.924] (II) fglrx(0): DPI set to (96, 92)
[    16.925] (II) fglrx(0): Eyefinity capable adapter detected.
[    16.925] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 6 configurable heads and 1 displays connected.
[    16.925] (==) fglrx(0):  PseudoColor visuals disabled
[    16.925] (II) Loading sub module "ramdac"
[    16.925] (II) LoadModule: "ramdac"
[    16.925] (II) Module "ramdac" already built-in
[    16.925] (==) fglrx(0): NoDRI = NO
[    16.925] (==) fglrx(0): Capabilities: 0x00000000
[    16.925] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    16.925] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    16.925] (==) fglrx(0): UseFastTLS=0
[    16.925] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    16.925] (--) Depth 24 pixmap format is 32 bpp
[    16.925] Loading extension ATIFGLRXDRI
[    16.925] (II) fglrx(0): doing swlDriScreenInit
[    16.925] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    16.925] ukiDynamicMajor: found major device number 250
[    16.925] ukiDynamicMajor: found major device number 250
[    16.925] ukiDynamicMajor: found major device number 250
[    16.925] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.925] ukiOpenDevice: node name is /dev/ati/card0
[    16.926] ukiOpenDevice: open result is 16, (OK)
[    16.926] ukiOpenByBusid: ukiOpenMinor returns 16
[    16.926] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    16.926] (II) fglrx(0): [uki] DRM interface version 1.0
[    16.926] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    16.926] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    16.926] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f08fe017000
[    16.926] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    16.926] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    16.926] (II) fglrx(0): swlDriScreenInit done
[    16.926] (II) fglrx(0): Kernel Module Version Information:
[    16.926] (II) fglrx(0):     Name: fglrx
[    16.926] (II) fglrx(0):     Version: 12.10.5
[    16.926] (II) fglrx(0):     Date: Mar 28 2013
[    16.926] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    16.926] (II) fglrx(0): Kernel Module version matches driver.
[    16.926] (II) fglrx(0): Kernel Module Build Time Information:
[    16.926] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.8.10-1-ARCH
[    16.926] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    16.926] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    16.926] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    16.926] (II) fglrx(0): [uki] register handle = 0x00004000
[    16.926] (EE) fglrx(0): Failed to open CMMQS connection.
[    16.926] (EE) 
[    16.926] (EE) Backtrace:
[    16.958] (EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57ef3d]
[    16.958] (EE) 1: /usr/bin/X (0x400000+0x182cf9) [0x582cf9]
[    16.958] (EE) 2: /usr/lib/libpthread.so.0 (0x7f08fd4f0000+0xf0e0) [0x7f08fd4ff0e0]
[    16.959] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (swlDrmFreeSurfaces+0x42) [0x7f08fa8e96f2]
[    16.959] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriCloseScreen+0x14d) [0x7f08fa8b1f7d]
[    16.960] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriScreenInit+0x8fc) [0x7f08fa8b162c]
[    16.960] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxScreenInit+0xc26) [0x7f08fa8ab416]
[    16.960] (EE) 7: /usr/bin/X (AddScreen+0x71) [0x4374d1]
[    16.960] (EE) 8: /usr/bin/X (InitOutput+0x3df) [0x47792f]
[    16.960] (EE) 9: /usr/bin/X (0x400000+0x26700) [0x426700]
[    16.960] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f08fc37ca15]
[    16.960] (EE) 11: /usr/bin/X (0x400000+0x26c2d) [0x426c2d]
[    16.961] (EE) 
[    16.961] (EE) Segmentation fault at address 0x890
[    16.961] 
Fatal server error:
[    16.961] Caught signal 11 (Segmentation fault). Server aborting
[    16.961] 
[    16.961] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    16.961] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    16.961] (EE)

Offline

#5236 2013-04-29 21:08:56

snack
Member
From: Italy
Registered: 2009-01-13
Posts: 874

Re: The AMD/ATI Bar & Grill

Unia wrote:

I have updated the wiki, please see the this change and this one. Is it oke now?

Thanks Unia, I think now it's correct (and it will be for looong time, until AMD will introduce support for newer xorg-servers tongue )

Offline

#5237 2013-04-30 02:23:03

aChipmunk
Member
Registered: 2011-10-17
Posts: 13

Re: The AMD/ATI Bar & Grill

Is there a way to install the old amd app sdk (the appstream or amdapp-sdk package).  I am coming from another distro and need version 2.4 or 2.5 for bitcoin mining smile

Offline

#5238 2013-04-30 10:05:27

woznme
Member
From: Gold Coast, AU
Registered: 2013-01-13
Posts: 22

Re: The AMD/ATI Bar & Grill

snack wrote:

woznme, I think you screwed your system a bit by mixing dkms packages from official repos with those from Vi0l0's repos. Try to remove with pacman all catalyst packages in your system (dkms, hook, utils, lib32), then be sure you placed the catalyst and xorg repos above any other repo in /etc/pacman.conf. Then install catalyst-hook, catalyst-utils and lib32-catalyst-utils, eventually removing any already present file that pacman complains about.

Thanks snack,  Thats pretty much the solution i came up with before i hit the sack last night. Removed them all then reinstalled fresh from the catalyst repo. Would of done it sooner but i've always preferred to try to fix things with a small push rather then ramming it with a truck. thanks for your help!

Offline

#5239 2013-04-30 10:10:18

snack
Member
From: Italy
Registered: 2009-01-13
Posts: 874

Re: The AMD/ATI Bar & Grill

woznme wrote:

Thanks snack,  Thats pretty much the solution i came up with before i hit the sack last night. Removed them all then reinstalled fresh from the catalyst repo. Would of done it sooner but i've always preferred to try to fix things with a small push rather then ramming it with a truck. thanks for your help!

You're welcome. BTW, I think that when there are problems related to package management the neat way to deal with them is through the package manager itself, if it is possible. Manual intervention in these cases must be reduced to a minimum, so "ramming everything with the pacman truck" is the way to go IMHO, rather than trying some subtle and error-prone manual intervention smile

Offline

#5240 2013-04-30 11:07:43

Anon11
Member
Registered: 2012-05-20
Posts: 36

Re: The AMD/ATI Bar & Grill

I disabled varibright. The problem is that brightness changes that i do manually don't take effect and it is always quite bright when i start.

mityukov wrote:
Anon11 wrote:

I still have the brightness bug with latest catalyst ( laptop backlight only changes after trying many times and it only changes between some random levels )

Have the same issue on the my system (catalyst/catalyst-hook + catalyst/catalyst-utils-pxp + catalyst/lib32-catalyst-utils-pxp).

but its manageable

Plz tell me how smile

On my laptop (HP dv6z) , i can sort of use function keys that change brightness.
At first they do nothing but if i keep doing increase/decrease randomly i eventually get to a lower brightness ( after abt 5-10 seconds of continuous inc/dec )

Weirdly, this does not seem to work if i use kde brightness widget.

Last edited by Anon11 (2013-04-30 11:10:34)

Offline

#5241 2013-04-30 13:26:14

MadNoob
Member
Registered: 2013-03-10
Posts: 18

Re: The AMD/ATI Bar & Grill

Anon11 wrote:

I disabled varibright. The problem is that brightness changes that i do manually don't take effect and it is always quite bright when i start.

mityukov wrote:
Anon11 wrote:

I still have the brightness bug with latest catalyst ( laptop backlight only changes after trying many times and it only changes between some random levels )

Have the same issue on the my system (catalyst/catalyst-hook + catalyst/catalyst-utils-pxp + catalyst/lib32-catalyst-utils-pxp).

but its manageable

Plz tell me how smile

On my laptop (HP dv6z) , i can sort of use function keys that change brightness.
At first they do nothing but if i keep doing increase/decrease randomly i eventually get to a lower brightness ( after abt 5-10 seconds of continuous inc/dec )

Weirdly, this does not seem to work if i use kde brightness widget.

tray with acpi_backlight=vendor in grub... it should work "randomly" with fn keys

Offline

#5242 2013-04-30 14:25:26

pYrO1v1aniac
Member
Registered: 2011-11-03
Posts: 51

Re: The AMD/ATI Bar & Grill

After recent updates to catalyst-hook, aticonfig --initial has detected my card again, (Previous versions said unsupported hardware and gave me a watermark). It's a Mobility radeon 5470, so should be supported by the driver, but using the xorg.conf file from aticonfig --initial X fails to start. With the generic xorg.conf I had been using, X starts, but performance is terrible, showing, for example 124FPS on a game, but actually running at 2FPS, the unsupported hardware watermark is gone, but the performance makes the desktop nearly unusable.

This machine has been through many graphics config changes, so it may be a better idea to clean install the graphics, can I do this without reinstalling the rest of the system? What needs to be removed or run to purge all the configuration files relating to xorg or graphics drivers?

Attached links are to my xorg.conf files.
xorg.conf from aticonfig --initial
Current (fallback) xorg.conf

Offline

#5243 2013-04-30 20:06:43

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

@pYrO1v1aniac:
yes, it looks like you are not alone with the low framerate on 13.4, lately I've seen similar comments on other forums...

snack wrote:

Never used catalyst-dkms but I think that it conflicts with catalyst-hook (AFAIK both provide fglx module). Remove catalyst-dkms and reinstall catalyst-hook. BTW there's some missing conflict in some PKGBUILD...

yes, soon (maybe tomorrow) I will update packages with this missing conflict.
BTW: ImNtReal has add catalyst-dkms into AUR.

Side note: after my e-mail catalyst-utils & lib32-catalyst-utils were removed from AUR's blacklist and so I was able to put it there again.

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

Offline

#5244 2013-05-01 06:58:03

DarksideEE7
Member
From: Arkansas, United States
Registered: 2009-06-06
Posts: 356

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:
abbradar wrote:

Hello,
Just a quick notice --- xorg-server 1.13.4 is out, so it would be good if Vi0L0 updates his [xorg113] repo. It adresses some security issues, notably. I'm sorry if this was already noted.

Thanks, updated. Previous version of the repo is named as [xorg113-original], url is the same.

hnws wrote:
 <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.

Same here. Firstly I thought that it's caused by my xorg-server 1.13.4, but no.
Wondering what's that?.. hmm... At least it doesn't seem to cause any damage.

Would like to note that I'm also getting

[104334.198848] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[104334.316465] <3>[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.

entries repeatedly.  I don't have any real problems other than an existing bug where my X session crashes upon resizing a window (specifically:  konsole, wine app).

Offline

#5245 2013-05-01 08:54:31

mokasin
Member
Registered: 2009-07-30
Posts: 35

Re: The AMD/ATI Bar & Grill

jkrause wrote:

Segmentation fault with catalyst-hook-13.4-1-x86_64.
I downgraded to catalyst-hook-13.3-10-x86_64, which works fine for me.

Kernel is 3.8.10-1-ARCH. Any idea?

[    14.053] 
X.Org X Server 1.13.4
Release Date: 2013-04-17
[    14.053] X Protocol Version 11, Revision 0
[    14.053] Build Operating System: Linux 3.8.10-1-ARCH x86_64 
[    14.053] Current Operating System: Linux timelineX 3.8.10-1-ARCH #1 SMP PREEMPT Sat Apr 27 12:36:59 CEST 2013 x86_64
[    14.053] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f4c7aa08-ef83-4006-80ee-9cb497d79846 ro splash nomodeset
[    14.053] Build Date: 28 April 2013  01:19:17PM
[    14.053]  
[    14.053] Current version of pixman: 0.28.2
[    14.053] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.053] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.053] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 29 21:25:37 2013
[    14.146] (==) Using config file: "/etc/X11/xorg.conf"
[    14.146] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.301] (==) ServerLayout "aticonfig Layout"
[    14.301] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    14.301] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    14.301] (**) |   |-->Device "aticonfig-Device[0]-0"
[    14.301] (==) Automatically adding devices
[    14.301] (==) Automatically enabling devices
[    14.301] (==) Automatically adding GPU devices
[    14.477] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.477] 	Entry deleted from font path.
[    14.575] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    14.575] 	Entry deleted from font path.
[    14.575] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    14.597] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    14.597] 	Entry deleted from font path.
[    14.597] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    14.597] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    14.597] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.597] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.629] (II) Loader magic: 0x7fbc20
[    14.629] (II) Module ABI versions:
[    14.629] 	X.Org ANSI C Emulation: 0.4
[    14.629] 	X.Org Video Driver: 13.1
[    14.629] 	X.Org XInput driver : 18.0
[    14.629] 	X.Org Server Extension : 7.0
[    14.631] (--) PCI:*(0:1:0:0) 1002:68c1:1025:035c rev 0, Mem @ 0xc0000000/134217728, 0xcc000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[    14.664] Initializing built-in extension Generic Event Extension
[    14.664] Initializing built-in extension SHAPE
[    14.664] Initializing built-in extension MIT-SHM
[    14.664] Initializing built-in extension XInputExtension
[    14.665] Initializing built-in extension XTEST
[    14.665] Initializing built-in extension BIG-REQUESTS
[    14.665] Initializing built-in extension SYNC
[    14.665] Initializing built-in extension XKEYBOARD
[    14.665] Initializing built-in extension XC-MISC
[    14.665] Initializing built-in extension SECURITY
[    14.665] Initializing built-in extension XINERAMA
[    14.665] Initializing built-in extension XFIXES
[    14.665] Initializing built-in extension RENDER
[    14.665] Initializing built-in extension RANDR
[    14.665] Initializing built-in extension COMPOSITE
[    14.665] Initializing built-in extension DAMAGE
[    14.665] Initializing built-in extension MIT-SCREEN-SAVER
[    14.665] Initializing built-in extension DOUBLE-BUFFER
[    14.665] Initializing built-in extension RECORD
[    14.665] Initializing built-in extension DPMS
[    14.665] Initializing built-in extension X-Resource
[    14.665] Initializing built-in extension XVideo
[    14.665] Initializing built-in extension XVideo-MotionCompensation
[    14.665] Initializing built-in extension XFree86-VidModeExtension
[    14.665] Initializing built-in extension XFree86-DGA
[    14.665] Initializing built-in extension XFree86-DRI
[    14.665] Initializing built-in extension DRI2
[    14.665] (II) "glx" will be loaded by default.
[    14.665] (II) LoadModule: "glx"
[    14.746] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.839] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    14.839] 	compiled for 6.9.0, module version = 1.0.0
[    14.840] Loading extension GLX
[    14.840] (II) LoadModule: "fglrx"
[    14.877] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    16.041] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    16.041] 	compiled for 1.4.99.906, module version = 12.10.5
[    16.041] 	Module class: X.Org Video Driver
[    16.057] (II) Loading sub module "fglrxdrm"
[    16.057] (II) LoadModule: "fglrxdrm"
[    16.057] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.212] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    16.212] 	compiled for 1.4.99.906, module version = 12.10.5
[    16.212] (II) AMD Proprietary Linux Driver Version Identifier:12.10.05
[    16.212] (II) AMD Proprietary Linux Driver Release Identifier: 12.104                               
[    16.212] (II) AMD Proprietary Linux Driver Build Date: Mar 28 2013 21:07:25
[    16.212] (++) using VT number 7

[    16.405] (WW) Falling back to old probe method for fglrx
[    16.504] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    16.518] ukiDynamicMajor: found major device number 250
[    16.518] ukiDynamicMajor: found major device number 250
[    16.518] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.518] ukiOpenDevice: node name is /dev/ati/card0
[    16.518] ukiOpenDevice: open result is 12, (OK)
[    16.646] ukiOpenDevice: open result is 12, (OK)
[    16.646] ukiOpenByBusid: ukiOpenMinor returns 12
[    16.646] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    16.657] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[    16.670] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    16.670] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    16.683] (II) AMD Video driver is signed
[    16.683] (II) fglrx(0): pEnt->device->identifier=0x22e3670
[    16.684] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
[    16.684] (II) Loading sub module "vgahw"
[    16.684] (II) LoadModule: "vgahw"
[    16.684] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    16.695] (II) Module vgahw: vendor="X.Org Foundation"
[    16.695] 	compiled for 1.13.4, module version = 0.1.0
[    16.695] 	ABI class: X.Org Video Driver, version 13.1
[    16.695] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    16.695] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    16.695] (==) fglrx(0): Default visual is TrueColor
[    16.695] (**) fglrx(0): Option "DPMS" "true"
[    16.695] (==) fglrx(0): RGB weight 888
[    16.695] (II) fglrx(0): Using 8 bits per RGB 
[    16.696] (==) fglrx(0): Buffer Tiling is ON
[    16.696] (II) Loading sub module "fglrxdrm"
[    16.696] (II) LoadModule: "fglrxdrm"
[    16.696] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    16.696] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    16.696] 	compiled for 1.4.99.906, module version = 12.10.5
[    16.698] ukiDynamicMajor: found major device number 250
[    16.698] ukiDynamicMajor: found major device number 250
[    16.698] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.698] ukiOpenDevice: node name is /dev/ati/card0
[    16.698] ukiOpenDevice: open result is 15, (OK)
[    16.698] ukiOpenByBusid: ukiOpenMinor returns 15
[    16.698] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    16.699] (**) fglrx(0): NoAccel = NO
[    16.699] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    16.699] (--) fglrx(0): Chipset: "AMD Radeon HD 6500M/5600/5700 Series" (Chipset = 0x68c1)
[    16.699] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x035c)
[    16.699] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    16.699] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    16.699] (--) fglrx(0): MMIO registers at 0xcc000000
[    16.699] (--) fglrx(0): I/O port at 0x00003000
[    16.699] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    16.712] (II) fglrx(0): AC Adapter is used
[    16.712] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    16.712] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    16.712] (II) fglrx(0): PCIE card detected
[    16.713] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    16.713] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    16.713] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    16.713] (II) fglrx(0): RandR 1.2 support is enabled!
[    16.713] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    16.713] (==) fglrx(0): Center Mode is disabled 
[    16.713] (II) Loading sub module "fb"
[    16.713] (II) LoadModule: "fb"
[    16.738] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.747] (II) Module fb: vendor="X.Org Foundation"
[    16.747] 	compiled for 1.13.4, module version = 1.0.0
[    16.747] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.747] (II) Loading sub module "ddc"
[    16.747] (II) LoadModule: "ddc"
[    16.747] (II) Module "ddc" already built-in
[    16.922] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    16.922] (II) fglrx(0): Output DFP1 has no monitor section
[    16.922] (II) fglrx(0): Output CRT1 has no monitor section
[    16.922] (II) Loading sub module "ddc"
[    16.922] (II) LoadModule: "ddc"
[    16.922] (II) Module "ddc" already built-in
[    16.922] (II) fglrx(0): Connected Display0: LVDS
[    16.922] (II) fglrx(0):  Display0: Failed to get EDID information. 
[    16.923] (II) fglrx(0): EDID for output LVDS
[    16.923] (II) fglrx(0): Manufacturer: SEC  Model: 3030  Serial#: 0
[    16.923] (II) fglrx(0): Year: 2009  Week: 0
[    16.923] (II) fglrx(0): EDID Version: 1.3
[    16.923] (II) fglrx(0): Digital Display Input
[    16.923] (II) fglrx(0): Max Image Size [cm]: horiz.: 36  vert.: 21
[    16.923] (II) fglrx(0): Gamma: 2.20
[    16.923] (II) fglrx(0): No DPMS capabilities specified
[    16.923] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.923] (II) fglrx(0): First detailed timing is preferred mode
[    16.923] (II) fglrx(0): redX: 0.585 redY: 0.341   greenX: 0.352 greenY: 0.578
[    16.923] (II) fglrx(0): blueX: 0.151 blueY: 0.113   whiteX: 0.313 whiteY: 0.329
[    16.923] (II) fglrx(0): Manufacturer's mask: 0
[    16.923] (II) fglrx(0): Supported detailed timing:
[    16.924] (II) fglrx(0): clock: 75.2 MHz   Image Size:  344 x 194 mm
[    16.924] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1586 h_border: 0
[    16.924] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[    16.924] (II) fglrx(0): Unknown vendor-specific block f
[    16.924] (II) fglrx(0):  SAMSUNG
[    16.924] (II) fglrx(0):  156AT11-A01
[    16.924] (II) fglrx(0): EDID (in hex):
[    16.924] (II) fglrx(0): 	00ffffffffffff004ca3303000000000
[    16.924] (II) fglrx(0): 	00130103802415780ad0c595575a9426
[    16.924] (II) fglrx(0): 	1d505400000001010101010101010101
[    16.924] (II) fglrx(0): 	0101010101015e1d56dc500016303020
[    16.924] (II) fglrx(0): 	250058c2100000190000000f00000000
[    16.924] (II) fglrx(0): 	00000000001eb4027400000000fe0053
[    16.924] (II) fglrx(0): 	414d53554e470a2020202020000000fe
[    16.924] (II) fglrx(0): 	00313536415431312d4130310a20005d
[    16.924] (II) fglrx(0): EDID vendor "SEC", prod id 12336
[    16.924] (II) fglrx(0): Printing DDC gathered Modelines:
[    16.924] (II) fglrx(0): Modeline "1366x768"x0.0   75.18  1366 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    16.924] (II) fglrx(0): Printing probed modes for output LVDS
[    16.924] (II) fglrx(0): Modeline "1366x768"x60.0   75.18  1366 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[    16.924] (II) fglrx(0): Modeline "1360x768"x60.0   75.18  1360 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1280x768"x60.0   75.18  1280 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1280x720"x60.0   75.18  1280 1414 1446 1586  720 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1024x768"x60.0   75.18  1024 1414 1446 1586  768 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "1024x600"x60.0   75.18  1024 1414 1446 1586  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "800x600"x60.0   75.18  800 1414 1446 1586  600 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "800x480"x60.0   75.18  800 1414 1446 1586  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): Modeline "640x480"x60.0   75.18  640 1414 1446 1586  480 770 775 790 -hsync -vsync (47.4 kHz e)
[    16.924] (II) fglrx(0): EDID for output DFP1
[    16.924] (II) fglrx(0): EDID for output CRT1
[    16.924] (II) fglrx(0): Output LVDS connected
[    16.924] (II) fglrx(0): Output DFP1 disconnected
[    16.924] (II) fglrx(0): Output CRT1 disconnected
[    16.924] (II) fglrx(0): Using exact sizes for initial modes
[    16.924] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    16.924] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    16.924] (II) fglrx(0): Display dimensions: (360, 210) mm
[    16.924] (II) fglrx(0): DPI set to (96, 92)
[    16.925] (II) fglrx(0): Eyefinity capable adapter detected.
[    16.925] (II) fglrx(0): Adapter AMD Radeon HD 6500M/5600/5700 Series has 6 configurable heads and 1 displays connected.
[    16.925] (==) fglrx(0):  PseudoColor visuals disabled
[    16.925] (II) Loading sub module "ramdac"
[    16.925] (II) LoadModule: "ramdac"
[    16.925] (II) Module "ramdac" already built-in
[    16.925] (==) fglrx(0): NoDRI = NO
[    16.925] (==) fglrx(0): Capabilities: 0x00000000
[    16.925] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    16.925] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    16.925] (==) fglrx(0): UseFastTLS=0
[    16.925] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    16.925] (--) Depth 24 pixmap format is 32 bpp
[    16.925] Loading extension ATIFGLRXDRI
[    16.925] (II) fglrx(0): doing swlDriScreenInit
[    16.925] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    16.925] ukiDynamicMajor: found major device number 250
[    16.925] ukiDynamicMajor: found major device number 250
[    16.925] ukiDynamicMajor: found major device number 250
[    16.925] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    16.925] ukiOpenDevice: node name is /dev/ati/card0
[    16.926] ukiOpenDevice: open result is 16, (OK)
[    16.926] ukiOpenByBusid: ukiOpenMinor returns 16
[    16.926] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    16.926] (II) fglrx(0): [uki] DRM interface version 1.0
[    16.926] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    16.926] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    16.926] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f08fe017000
[    16.926] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    16.926] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    16.926] (II) fglrx(0): swlDriScreenInit done
[    16.926] (II) fglrx(0): Kernel Module Version Information:
[    16.926] (II) fglrx(0):     Name: fglrx
[    16.926] (II) fglrx(0):     Version: 12.10.5
[    16.926] (II) fglrx(0):     Date: Mar 28 2013
[    16.926] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    16.926] (II) fglrx(0): Kernel Module version matches driver.
[    16.926] (II) fglrx(0): Kernel Module Build Time Information:
[    16.926] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.8.10-1-ARCH
[    16.926] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    16.926] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    16.926] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    16.926] (II) fglrx(0): [uki] register handle = 0x00004000
[    16.926] (EE) fglrx(0): Failed to open CMMQS connection.
[    16.926] (EE) 
[    16.926] (EE) Backtrace:
[    16.958] (EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57ef3d]
[    16.958] (EE) 1: /usr/bin/X (0x400000+0x182cf9) [0x582cf9]
[    16.958] (EE) 2: /usr/lib/libpthread.so.0 (0x7f08fd4f0000+0xf0e0) [0x7f08fd4ff0e0]
[    16.959] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (swlDrmFreeSurfaces+0x42) [0x7f08fa8e96f2]
[    16.959] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriCloseScreen+0x14d) [0x7f08fa8b1f7d]
[    16.960] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxDriScreenInit+0x8fc) [0x7f08fa8b162c]
[    16.960] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs113_atiddxScreenInit+0xc26) [0x7f08fa8ab416]
[    16.960] (EE) 7: /usr/bin/X (AddScreen+0x71) [0x4374d1]
[    16.960] (EE) 8: /usr/bin/X (InitOutput+0x3df) [0x47792f]
[    16.960] (EE) 9: /usr/bin/X (0x400000+0x26700) [0x426700]
[    16.960] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f08fc37ca15]
[    16.960] (EE) 11: /usr/bin/X (0x400000+0x26c2d) [0x426c2d]
[    16.961] (EE) 
[    16.961] (EE) Segmentation fault at address 0x890
[    16.961] 
Fatal server error:
[    16.961] Caught signal 11 (Segmentation fault). Server aborting
[    16.961] 
[    16.961] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    16.961] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    16.961] (EE)

Yeah, same with me. Btw, I'm using a HD 7950. Which card do you have?

Offline

#5246 2013-05-01 09:28:43

justdanyul
Member
Registered: 2011-09-29
Posts: 133

Re: The AMD/ATI Bar & Grill

Im getting a bunch of these as awell

[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.

seems to mess with virtualbox, which stopped working all together.

Offline

#5247 2013-05-01 11:40:59

Vi0L0
Member
From: Poland
Registered: 2009-06-24
Posts: 1,349
Website

Re: The AMD/ATI Bar & Grill

Ok, so I've updated AUR and main repos: [catalyst] [catalyst-stable] [catalyst-hd234k] with:
- catalyst-dkms conflict;
- catalyst-generator which has gained new feature:
thanks to Mikkel Oscar Lyderik catalyst_build_module script now has got autocompletion on bash and zsh cool
Autocompletion is showing kernels listed in /usr/lib/modules and others options like all, remove, etc.

justdanyul wrote:

Im getting a bunch of these as awell

[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.

seems to mess with virtualbox, which stopped working all together.

Are you the [testing] user? I've seen a note on ML that there's (was maybe?) a problem with linux 3.9 and virtualbox.
Here virtualbox is working well (also on custom 3.9 kernel).
BTW: ever considered switching to kvm? wink

OT: maybe nVidia is making better blobs, but just look at their way!

Last edited by Vi0L0 (2013-05-01 12:10:37)

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

Offline

#5248 2013-05-02 04:19:24

Anon11
Member
Registered: 2012-05-20
Posts: 36

Re: The AMD/ATI Bar & Grill

MadNoob wrote:
Anon11 wrote:

I disabled varibright. The problem is that brightness changes that i do manually don't take effect and it is always quite bright when i start.

mityukov wrote:

Have the same issue on the my system (catalyst/catalyst-hook + catalyst/catalyst-utils-pxp + catalyst/lib32-catalyst-utils-pxp).



Plz tell me how smile

On my laptop (HP dv6z) , i can sort of use function keys that change brightness.
At first they do nothing but if i keep doing increase/decrease randomly i eventually get to a lower brightness ( after abt 5-10 seconds of continuous inc/dec )

Weirdly, this does not seem to work if i use kde brightness widget.

tray with acpi_backlight=vendor in grub... it should work "randomly" with fn keys

Does not work on my laptop. Function keys for brightness stops working.
The backlight issue should be a catalyst bug as it was working in 12.8

Offline

#5249 2013-05-02 10:17:02

justdanyul
Member
Registered: 2011-09-29
Posts: 133

Re: The AMD/ATI Bar & Grill

Vi0L0 wrote:

Ok, so I've updated AUR and main repos: [catalyst] [catalyst-stable] [catalyst-hd234k] with:
- catalyst-dkms conflict;
- catalyst-generator which has gained new feature:
thanks to Mikkel Oscar Lyderik catalyst_build_module script now has got autocompletion on bash and zsh cool
Autocompletion is showing kernels listed in /usr/lib/modules and others options like all, remove, etc.

justdanyul wrote:

Im getting a bunch of these as awell

[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.

seems to mess with virtualbox, which stopped working all together.

Are you the [testing] user? I've seen a note on ML that there's (was maybe?) a problem with linux 3.9 and virtualbox.
Here virtualbox is working well (also on custom 3.9 kernel).
BTW: ever considered switching to kvm? wink

OT: maybe nVidia is making better blobs, but just look at their way!


Ello'

Nope, I'm not on [testing], I'm on a unmodified 3.8. VirtualBox dies when it tries to resize the display, the last thing it says is

Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00007f1200000000 w=1024 h=768 bpp=24 cbLine=0xC00, flags=0x1

and then it freezes and completely stops responding (need to kill the processes manually).

Offline

#5250 2013-05-02 10:28:53

mityukov
Member
Registered: 2010-10-10
Posts: 66

Re: The AMD/ATI Bar & Grill

> Does not work on my laptop. Function keys for brightness stops working.

I'd add a note: the brightness doesn't change either if I change values directly in /sys/class/backlight/acpi_video*/brightness

Offline

Pages: 1 … 208 209 210 211 212 … 307

Topic closed

Board footer

Powered by FluxBB