You are not logged in.

#1 2013-04-29 23:53:45

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

[Solved] 50-synaptics editing and touchpad does not work

After launching the game Amnesia, my screen turned completely black, the mouse disappeared, and my computer froze. I remember saying that my graphic card wasn't supported, but I ignored it anyway. After force restarting the computer (no buttons worked), during the log in screen (xfce) the mouse was centered right in the middle of the screen, and the button on my Dell Inspiron 11z (F6) when pressed shows the touchpad with an x, never turns on.

My laptops has an i3 with xf86-input-synaptics 1.7.0-1.
Does not have xorg.conf files, xorg.conf.d files, xorg.conf.d/10-endev.conf files but it does have xorg.conf.d/50-synaptics.conf files.

Within that I checked https://bbs.archlinux.org/viewtopic.php?id=115196 and the Synaptics wiki and added (don't know how to copy paste without the mouse on the command line or chromium) some options that were missing. Restarted and the mouse does not work.

I ran cat for the xorg files and would like to copy paste them to see if there is something wrong.

I also checked the synclient -l and it is not loaded.

I'm assuming that Amnesia overwrote the mouse settings or the latest linux kernel did. Btw, I'm running testing, and community testing.

Any help will be appreciated, I really want to get back to using my computer.

Last edited by jjshinobi (2013-05-02 18:15:00)

Offline

#2 2013-04-30 01:54:23

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

It's not a hardware problem. I booted into Debian's rescue mode and the mouse worked. Also changed mouse to event* in the conf files. Nothing.

Offline

#3 2013-04-30 23:07:27

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

I finally found out how to copy paste without the mouse! :-). I have grown to be patient but it still time that was wasted, I've been learning a few things here and there though. Hopefully someone can help me so that I can get back to using my laptop again.

Here's my dmesg.log:

< [    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.10-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Apr 27 12:36:59 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b2de9258-9905-467e-8e49-312a09025ed1 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007763efff] usable
[    0.000000] BIOS-e820: [mem 0x000000007763f000-0x00000000776befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000776bf000-0x00000000777befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000777bf000-0x00000000777fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000777ff000-0x00000000777fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000077800000-0x000000007bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc. Inspiron 1121/0K039P, BIOS A01 11/15/2010
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x77800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-combining
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 078000000 mask FF8000000 uncachable
[    0.000000]   4 base 077800000 mask FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x777fffff]
[    0.000000]  [mem 0x00000000-0x777fffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x777fffff @ [mem 0x1fffd000-0x1fffffff]
[    0.000000] RAMDISK: [mem 0x37a60000-0x37d27fff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000777fe120 0007C (v01 DELL    CL09    00000001      01000013)
[    0.000000] ACPI: FACP 00000000777fc000 000F4 (v04 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: DSDT 00000000777f0000 08BC4 (v02 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: FACS 000000007776d000 00040
[    0.000000] ACPI: ASF! 00000000777fd000 000A5 (v32 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: HPET 00000000777fb000 00038 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: APIC 00000000777fa000 0008C (v02 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: MCFG 00000000777f9000 0003C (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: SLIC 00000000777ef000 00176 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: BOOT 00000000777eb000 00028 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: ASPT 00000000777e8000 00034 (v04 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: WDAT 00000000777e7000 00224 (v01 DELL    CL09    00000001 ASL  01000013)
[    0.000000] ACPI: OSFR 00000000777e6000 00070 (v01 DELL    CL09    27D60B15 ASL  01000013)
[    0.000000] ACPI: SSDT 00000000777e5000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000777fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x777fffff]
[    0.000000]   NODE_DATA [mem 0x7763a000-0x7763efff]
[    0.000000]  [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880075000000-ffff880076dfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x7763efff]
[    0.000000]   node   0: [mem 0x777ff000-0x777fffff]
[    0.000000] On node 0 totalpages: 488909
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3911 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7584 pages used for memmap
[    0.000000]   DMA32 zone: 477344 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000007763f000 - 00000000776bf000
[    0.000000] PM: Registered nosave memory: 00000000776bf000 - 00000000777bf000
[    0.000000] PM: Registered nosave memory: 00000000777bf000 - 00000000777ff000
[    0.000000] e820: [mem 0x7c000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880077400000 s85184 r8192 d21312 u262144
[    0.000000] pcpu-alloc: s85184 r8192 d21312 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 481255
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b2de9258-9905-467e-8e49-312a09025ed1 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1909712k/1957888k available (4908k kernel code, 2252k absent, 45924k reserved, 4024k data, 820k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 7864320 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 1197.127 MHz processor
[    0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 2395.01 BogoMIPS (lpj=3990423)
[    0.000023] pid_max: default: 32768 minimum: 301
[    0.000120] Security Framework initialized
[    0.000148] AppArmor: AppArmor disabled by boot time parameter
[    0.000608] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002139] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.002793] Mount-cache hash table entries: 256
[    0.003422] Initializing cgroup subsys cpuacct
[    0.003439] Initializing cgroup subsys memory
[    0.003453] Initializing cgroup subsys devices
[    0.003455] Initializing cgroup subsys freezer
[    0.003471] Initializing cgroup subsys net_cls
[    0.003474] Initializing cgroup subsys blkio
[    0.003541] CPU: Physical Processor ID: 0
[    0.003543] CPU: Processor Core ID: 0
[    0.003552] mce: CPU supports 9 MCE banks
[    0.003580] CPU0: Thermal monitoring handled by SMI
[    0.003606] process: using mwait in idle threads
[    0.003613] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[    0.004064] Freeing SMP alternatives: 20k freed
[    0.007285] ACPI: Core revision 20121018
[    0.066405] ftrace: allocating 19313 entries in 76 pages
[    0.097823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.131164] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       U 330  @ 1.20GHz (fam: 06, model: 25, stepping: 05)
[    0.236377] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.236400] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.236404] ... version:                3
[    0.236406] ... bit width:              48
[    0.236408] ... generic registers:      4
[    0.236410] ... value mask:             0000ffffffffffff
[    0.236412] ... max period:             000000007fffffff
[    0.236414] ... fixed-purpose events:   3
[    0.236416] ... event mask:             000000070000000f
[    0.284521] CPU1: Thermal monitoring handled by SMI
[    0.286976] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.304346] CPU2: Thermal monitoring handled by SMI
[    0.324430] CPU3: Thermal monitoring handled by SMI
[    0.273167] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.326586] Brought up 4 CPUs
[    0.326607] smpboot: Total of 4 processors activated (9580.05 BogoMIPS)
[    0.331185] devtmpfs: initialized
[    0.334319] PM: Registering ACPI NVS region [mem 0x776bf000-0x777befff] (1048576 bytes)
[    0.336891] RTC time:  3:30:38, date: 04/30/13
[    0.337020] NET: Registered protocol family 16
[    0.337415] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.337419] ACPI: bus type pci registered
[    0.337641] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.337646] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.384225] PCI: Using configuration type 1 for base access
[    0.384248] dmi type 0xB1 record - unknown flag
[    0.384630] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.384632] mtrr: probably your BIOS does not setup all CPUs.
[    0.384634] mtrr: corrected configuration.
[    0.385845] bio: create slab <bio-0> at 0
[    0.386041] ACPI: Added _OSI(Module Device)
[    0.386044] ACPI: Added _OSI(Processor Device)
[    0.386047] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.386050] ACPI: Added _OSI(Processor Aggregator Device)
[    0.390861] ACPI: EC: Look up EC in DSDT
[    0.395559] ACPI: Executed 1 blocks of module-level executable AML code
[    0.409820] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.410667] ACPI: SSDT 0000000077691c18 00268 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.411394] ACPI: Dynamic OEM Table Load:
[    0.411399] ACPI: SSDT           (null) 00268 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.411730] ACPI: SSDT 000000007768f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.412423] ACPI: Dynamic OEM Table Load:
[    0.412427] ACPI: SSDT           (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.413040] ACPI: SSDT 0000000077690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.413858] ACPI: Dynamic OEM Table Load:
[    0.413862] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.414311] ACPI: SSDT 000000007768ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.415515] ACPI: Dynamic OEM Table Load:
[    0.415520] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.457087] ACPI: Interpreter enabled
[    0.457095] ACPI: (supports S0 S3 S4 S5)
[    0.457189] ACPI: Using IOAPIC for interrupt routing
[    0.506863] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.507637] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.507645] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.508586] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.508590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.509042] \_SB_.PCI0:_OSC invalid UUID
[    0.509045] _OSC request data:1 8 1f 
[    0.510804] PCI host bridge to bus 0000:00
[    0.510810] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.510815] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.510830] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.510834] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.510838] pci_bus 0000:00: root bus resource [mem 0x7c000000-0xfeafffff]
[    0.510865] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.510909] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.510972] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.511005] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[    0.511029] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.511037] pci 0000:00:02.0: reg 20: [io  0x2078-0x207f]
[    0.511205] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.511271] pci 0000:00:16.0: reg 10: [mem 0x90607100-0x9060710f 64bit]
[    0.511491] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.511590] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.512438] pci 0000:00:1a.0: reg 10: [mem 0x90606c00-0x90606fff]
[    0.517230] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.517317] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.517360] pci 0000:00:1b.0: reg 10: [mem 0x90600000-0x90603fff 64bit]
[    0.517581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.517648] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.517880] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.517951] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[    0.518178] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.518277] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.519089] pci 0000:00:1d.0: reg 10: [mem 0x90606800-0x90606bff]
[    0.523885] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.523966] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.524166] pci 0000:00:1f.0: [8086:3b0b] type 00 class 0x060100
[    0.524459] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.524523] pci 0000:00:1f.2: reg 10: [io  0x2058-0x205f]
[    0.524553] pci 0000:00:1f.2: reg 14: [io  0x2084-0x2087]
[    0.524569] pci 0000:00:1f.2: reg 18: [io  0x2050-0x2057]
[    0.524597] pci 0000:00:1f.2: reg 1c: [io  0x2080-0x2083]
[    0.524626] pci 0000:00:1f.2: reg 20: [io  0x2020-0x203f]
[    0.524656] pci 0000:00:1f.2: reg 24: [mem 0x90606000-0x906067ff]
[    0.524814] pci 0000:00:1f.2: PME# supported from D3hot
[    0.524864] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.524920] pci 0000:00:1f.3: reg 10: [mem 0x90607000-0x906070ff 64bit]
[    0.524987] pci 0000:00:1f.3: reg 20: [io  0x2000-0x201f]
[    0.525106] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.525172] pci 0000:00:1f.6: reg 10: [mem 0x90604000-0x90604fff 64bit]
[    0.525574] pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
[    0.525636] pci 0000:01:00.0: reg 10: [mem 0x90500000-0x9053ffff 64bit]
[    0.525669] pci 0000:01:00.0: reg 18: [io  0x1000-0x107f]
[    0.525929] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.529667] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.529692] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.529699] pci 0000:00:1c.0:   bridge window [mem 0x90500000-0x905fffff]
[    0.529900] pci 0000:02:00.0: [8086:0087] type 00 class 0x028000
[    0.529986] pci 0000:02:00.0: reg 10: [mem 0x90400000-0x90401fff 64bit]
[    0.530329] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.536325] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.536342] pci 0000:00:1c.1:   bridge window [mem 0x90400000-0x904fffff]
[    0.536533] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.536562] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.536565] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.536569] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.536585] pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfeafffff] (subtractive decode)
[    0.536664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.536860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.536960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.537217] \_SB_.PCI0:_OSC invalid UUID
[    0.537220] _OSC request data:1 1f 1f 
[    0.537239]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.537242]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.539171] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    0.539359] PCI host bridge to bus 0000:ff
[    0.539364] pci_bus 0000:ff: root bus resource [bus ff]
[    0.539386] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.539437] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.539500] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.539557] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.539622] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.539680] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.539764]  pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.539779]  pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.540305] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    0.540432] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.540559] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.540670] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.540793] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.540905] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.541028] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.541151] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.541386] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.541394] vgaarb: loaded
[    0.541408] vgaarb: bridge control possible 0000:00:02.0
[    0.541491] PCI: Using ACPI for IRQ routing
[    0.561224] PCI: pci_cache_line_size set to 64 bytes
[    0.561366] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.561369] e820: reserve RAM buffer [mem 0x7763f000-0x77ffffff]
[    0.561372] e820: reserve RAM buffer [mem 0x77800000-0x77ffffff]
[    0.561633] NetLabel: Initializing
[    0.561648] NetLabel:  domain hash size = 128
[    0.561650] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.561684] NetLabel:  unlabeled traffic allowed by default
[    0.561727] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.561750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.563781] Switching to clocksource hpet
[    0.577623] pnp: PnP ACPI init
[    0.577682] ACPI: bus type pnp registered
[    0.597228] pnp 00:00: [dma 4]
[    0.597285] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.597335] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.597543] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.597608] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.597651] pnp 00:04: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.0 BAR 13 [io  0x1000-0x1fff]
[    0.597714] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.597718] system 00:04: [io  0x0800-0x080f] has been reserved
[    0.597722] system 00:04: [io  0x0810-0x0813] has been reserved
[    0.597726] system 00:04: [io  0xffff] has been reserved
[    0.597730] system 00:04: [io  0x0400-0x047f] has been reserved
[    0.597734] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.597738] system 00:04: [io  0xff2c-0xff2f] has been reserved
[    0.597744] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.597801] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.597853] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.597904] pnp 00:07: Plug and Play ACPI device, IDs DLL0471 PNP0f13 (active)
[    0.598377] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.598382] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.598386] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.598390] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.598394] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    0.598398] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.598402] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[    0.598406] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.598410] system 00:08: [mem 0x7c000000-0x7c000fff] has been reserved
[    0.598415] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.598650] pnp: PnP ACPI: found 9 devices
[    0.598653] ACPI: ACPI bus type pnp unregistered
[    0.606704] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.606723] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.606729] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.606752] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.606756] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.606760] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.606769] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7c100000-0x7c2fffff 64bit pref]
[    0.606774] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7c300000-0x7c4fffff 64bit pref]
[    0.606779] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.606783] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.606790] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.606799] pci 0000:00:1c.0:   bridge window [mem 0x90500000-0x905fffff]
[    0.606807] pci 0000:00:1c.0:   bridge window [mem 0x7c100000-0x7c2fffff 64bit pref]
[    0.606818] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.606823] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.606833] pci 0000:00:1c.1:   bridge window [mem 0x90400000-0x904fffff]
[    0.606840] pci 0000:00:1c.1:   bridge window [mem 0x7c300000-0x7c4fffff 64bit pref]
[    0.606852] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.606918] pci 0000:00:1e.0: setting latency timer to 64
[    0.606925] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.606929] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.606932] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.606936] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xfeafffff]
[    0.606940] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.606943] pci_bus 0000:01: resource 1 [mem 0x90500000-0x905fffff]
[    0.606947] pci_bus 0000:01: resource 2 [mem 0x7c100000-0x7c2fffff 64bit pref]
[    0.606951] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.606954] pci_bus 0000:02: resource 1 [mem 0x90400000-0x904fffff]
[    0.606958] pci_bus 0000:02: resource 2 [mem 0x7c300000-0x7c4fffff 64bit pref]
[    0.606962] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.606965] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.606968] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.606972] pci_bus 0000:03: resource 7 [mem 0x7c000000-0xfeafffff]
[    0.607041] NET: Registered protocol family 2
[    0.607334] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.607478] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.607587] TCP: Hash tables configured (established 16384 bind 16384)
[    0.607635] TCP: reno registered
[    0.607645] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.607665] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.607773] NET: Registered protocol family 1
[    0.607792] pci 0000:00:02.0: Boot video device
[    0.633885] PCI: CLS 64 bytes, default 64
[    0.633964] Unpacking initramfs...
[    0.799592] Freeing initrd memory: 2848k freed
[    0.801117] Simple Boot Flag at 0x44 set to 0x1
[    0.802004] audit: initializing netlink socket (disabled)
[    0.802025] type=2000 audit(1367292637.656:1): initialized
[    0.826510] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.829193] VFS: Disk quotas dquot_6.5.2
[    0.829276] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.829582] msgmni has been set to 3735
[    0.830074] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.830156] io scheduler noop registered
[    0.830162] io scheduler deadline registered
[    0.830172] io scheduler cfq registered (default)
[    0.830600] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.830603] vesafb: scrolling: redraw
[    0.830607] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.831008] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010400000, using 3072k, total 3072k
[    0.997583] Console: switching to colour frame buffer device 128x48
[    1.164060] fb0: VESA VGA frame buffer device
[    1.164078] intel_idle: MWAIT substates: 0x1120
[    1.164081] intel_idle: v0.4 model 0x25
[    1.164083] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.164179] GHES: HEST is not enabled!
[    1.164272] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.165043] Linux agpgart interface v0.103
[    1.165163] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.179408] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.179457] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.179654] mousedev: PS/2 mouse device common for all mice
[    1.179901] rtc_cmos 00:05: RTC can wake from S4
[    1.180087] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.180124] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.180260] cpuidle: using governor ladder
[    1.180415] cpuidle: using governor menu
[    1.180418] EFI Variables Facility v0.08 2004-May-17
[    1.180505] drop_monitor: Initializing network drop monitor service
[    1.180643] TCP: cubic registered
[    1.180816] NET: Registered protocol family 10
[    1.181090] NET: Registered protocol family 17
[    1.181104] Key type dns_resolver registered
[    1.181560] PM: Hibernation image not present or could not be loaded.
[    1.181575] registered taskstats version 1
[    1.182328]   Magic number: 9:36:514
[    1.182470] rtc_cmos 00:05: setting system clock to 2013-04-30 03:30:38 UTC (1367292638)
[    1.187460] Freeing unused kernel memory: 820k freed
[    1.187745] Write protecting the kernel read-only data: 8192k
[    1.194661] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.201167] Freeing unused kernel memory: 1224k freed
[    1.208141] Freeing unused kernel memory: 440k freed
[    1.232917] systemd-udevd[56]: starting version 202
[    1.285468] ACPI: bus type usb registered
[    1.285515] usbcore: registered new interface driver usbfs
[    1.285534] usbcore: registered new interface driver hub
[    1.286064] usbcore: registered new device driver usb
[    1.289026] SCSI subsystem initialized
[    1.289358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.289694] ehci-pci: EHCI PCI platform driver
[    1.291972] ACPI: bus type scsi registered
[    1.292066] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    1.292075] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.292092] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.292122] ehci-pci 0000:00:1a.0: debug port 2
[    1.296067] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.296093] libata version 3.00 loaded.
[    1.296104] ehci-pci 0000:00:1a.0: irq 16, io mem 0x90606c00
[    1.303576] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.304127] hub 1-0:1.0: USB hub found
[    1.304139] hub 1-0:1.0: 3 ports detected
[    1.304828] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    1.304847] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.304861] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.304895] ehci-pci 0000:00:1d.0: debug port 2
[    1.308867] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.308926] ehci-pci 0000:00:1d.0: irq 23, io mem 0x90606800
[    1.317496] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.318244] hub 2-0:1.0: USB hub found
[    1.318268] hub 2-0:1.0: 3 ports detected
[    1.318908] ahci 0000:00:1f.2: version 3.0
[    1.319019] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.319119] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[    1.319125] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst 
[    1.319135] ahci 0000:00:1f.2: setting latency timer to 64
[    1.320341] scsi0 : ahci
[    1.320620] scsi1 : ahci
[    1.320797] scsi2 : ahci
[    1.321053] scsi3 : ahci
[    1.321201] scsi4 : ahci
[    1.321381] scsi5 : ahci
[    1.321462] ata1: SATA max UDMA/133 abar m2048@0x90606000 port 0x90606100 irq 40
[    1.321465] ata2: DUMMY
[    1.321467] ata3: DUMMY
[    1.321469] ata4: DUMMY
[    1.321471] ata5: DUMMY
[    1.321473] ata6: DUMMY
[    1.610252] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.640238] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.687424] ata1.00: ATA-8: TOSHIBA MK2576GSX, GS002D, max UDMA/100
[    1.687430] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.688622] ata1.00: configured for UDMA/100
[    1.688920] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2576GS GS00 PQ: 0 ANSI: 5
[    1.697191] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    1.697340] sd 0:0:0:0: [sda] Write Protect is off
[    1.697346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.697408] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.734769] hub 1-1:1.0: USB hub found
[    1.734888] hub 1-1:1.0: 6 ports detected
[    1.758927]  sda: sda1 sda2 sda3 sda4
[    1.760253] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.803487] tsc: Refined TSC clocksource calibration: 1197.206 MHz
[    1.803495] Switching to clocksource tsc
[    1.843519] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.968123] hub 2-1:1.0: USB hub found
[    1.968328] hub 2-1:1.0: 8 ports detected
[    2.036828] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.141070] Initializing USB Mass Storage driver...
[    2.141197] usbcore: registered new interface driver usb-storage
[    2.141202] USB Mass Storage support registered.
[    2.158489] scsi6 : usb-storage 1-1.1:1.0
[    2.158703] usbcore: registered new interface driver ums-realtek
[    2.216732] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[    2.883286] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    3.162958] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    3.701479] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.529684] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    4.562209] systemd[1]: Set hostname to <arceus>.
[    5.275341] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.275628] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.275667] systemd[1]: Starting Remote File Systems.
[    5.275715] systemd[1]: Reached target Remote File Systems.
[    5.275752] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    5.275824] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.275859] systemd[1]: Starting LVM2 metadata daemon socket.
[    5.276019] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.276076] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    5.276190] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    5.276246] systemd[1]: Starting Delayed Shutdown Socket.
[    5.276351] systemd[1]: Listening on Delayed Shutdown Socket.
[    5.276497] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.276956] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.277263] systemd[1]: Starting udev Kernel Socket.
[    5.277383] systemd[1]: Listening on udev Kernel Socket.
[    5.277644] systemd[1]: Starting udev Control Socket.
[    5.277775] systemd[1]: Listening on udev Control Socket.
[    5.277833] systemd[1]: Starting Encrypted Volumes.
[    5.277879] systemd[1]: Reached target Encrypted Volumes.
[    5.277936] systemd[1]: Starting Journal Socket.
[    5.278141] systemd[1]: Listening on Journal Socket.
[    5.288193] systemd[1]: Started Load Kernel Modules.
[    5.288218] systemd[1]: Starting Setup Virtual Console...
[    5.293004] systemd[1]: Mounting POSIX Message Queue File System...
[    5.296309] systemd[1]: Starting udev Coldplug all Devices...
[    5.302542] systemd[1]: Mounting Configuration File System...
[    5.309179] systemd[1]: Starting Create static device nodes in /dev...
[    5.342130] systemd[1]: Starting Apply Kernel Variables...
[    5.358320] systemd[1]: Mounting Huge Pages File System...
[    5.362582] systemd[1]: Mounted FUSE Control File System.
[    5.365424] systemd[1]: Starting Set Up Additional Binary Formats...
[    5.372513] systemd[1]: Starting Journal Service...
[    5.385992] systemd[1]: Started Journal Service.
[    5.386142] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.386382] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.386474] systemd[1]: Starting Paths.
[    5.386538] systemd[1]: Reached target Paths.
[    5.386660] systemd[1]: Mounting Debug File System...
[    5.399283] systemd[1]: Expecting device dev-disk-by\x2duuid-19965fb8\x2d8df2\x2d4429\x2d92ad\x2d09a018ef02ca.device...
[    5.399353] systemd[1]: Started File System Check on Root Device.
[    5.399395] systemd[1]: Starting Remount Root and Kernel File Systems...
[    5.402856] systemd[1]: Mounting Temporary Directory...
[    5.658806] systemd[1]: Expecting device dev-disk-by\x2duuid-3b64e1a3\x2d9932\x2d4f87\x2d82ad\x2d723922c1a0ce.device...
[    5.660215] systemd[1]: Started Setup Virtual Console.
[    5.662409] systemd[1]: Started Apply Kernel Variables.
[    6.021409] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    6.116891] systemd-udevd[147]: starting version 202
[    6.826066] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[    6.826083] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.826090] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    6.826099] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.826103] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    6.826112] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.826116] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    6.826125] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.826128] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.834178] mei 0000:00:16.0: setting latency timer to 64
[    6.834320] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[    6.953786] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[    6.953896] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[    6.954093] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    6.963594] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    6.963744] ACPI: Lid Switch [LID0]
[    6.963882] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.963890] ACPI: Power Button [PWRB]
[    6.964015] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.964021] ACPI: Power Button [PWRF]
[    6.970468] ACPI Warning: 0x0000000000002000-0x000000000000201f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[    6.970483] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.990950] ACPI: Requesting acpi_cpufreq
[    7.037583] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    7.037725] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    7.038869] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    7.039175] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    7.128581] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x1
[    7.225111] ACPI: Battery Slot [BAT1] (battery present)
[    7.255038] wmi: Mapper loaded
[    7.266797] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.344721] ACPI: AC Adapter [ACAD] (on-line)
[    7.354088] [drm] Initialized drm 1.1.0 20060810
[    7.384471] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.387828] cfg80211: Calling CRDA to update world regulatory domain
[    7.452027] iTCO_vendor_support: vendor-support=0
[    7.480186] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    7.480190] Copyright(c) 2003-2012 Intel Corporation
[    7.480369] iwlwifi 0000:02:00.0: irq 42 for MSI/MSI-X
[    7.489959] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    7.490007] iTCO_wdt: Found a HM57 TCO device (Version=2, TCOBASE=0x0460)
[    7.490203] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.493793] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    7.514128] input: Dell WMI hotkeys as /devices/virtual/input/input5
[    7.571909] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x1
[    7.577304] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x1
[    7.578235] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x1
[    7.579083] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.584706] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[    7.717810] iwlwifi 0000:02:00.0: loaded firmware version 41.28.5.1 build 33926
[    7.812108] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    7.812117] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    7.812122] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    7.812126] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[    7.812130] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[    7.812136] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN, REV=0x84
[    7.812219] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[    7.885532] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.885758] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.885948] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.021981] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    8.065064] systemd-udevd[154]: renamed network interface eth0 to enp1s0
[    8.150760] checking generic (80000000 300000) vs hw (80000000 10000000)
[    8.150781] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    8.150826] Console: switching to colour dummy device 80x25
[    8.151141] i915 0000:00:02.0: setting latency timer to 64
[    8.199393] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    8.211105] systemd-udevd[160]: renamed network interface wlan0 to wlp2s0
[    8.218848] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    8.219006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.219010] [drm] Driver supports precise vblank timestamp query.
[    8.219180] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.245263] i2400m_usb 2-1.5:1.0: WiMAX interface wmx0 (00:1d:e1:4e:85:cf) ready
[    8.426552] fbcon: inteldrmfb (fb0) is primary device
[    8.550593] media: Linux media interface: v0.10
[    8.588631] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    8.729234] Linux video capture interface: v2.00
[    8.774393] uvcvideo: Found UVC 1.00 device Integrated Webcam (174f:143b)
[    8.794185] input: Integrated Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[    8.794403] usbcore: registered new interface driver uvcvideo
[    8.794404] USB Video Class driver (1.1.1)
[    8.947384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 654840
[    9.012723] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[    9.039370] Adding 8000364k swap on /dev/sda2.  Priority:-1 extents:1 across:8000364k 
[    9.144015] Console: switching to colour frame buffer device 170x48
[    9.151505] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.151509] i915 0000:00:02.0: registered panic notifier
[    9.290907] acpi device:01: registered as cooling_device4
[    9.291507] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    9.291657] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[    9.292115] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.340576] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   11.747914] i2400m_usb 2-1.5:1.0: firmware interface version 9.3.2
[   11.757708] usbcore: registered new interface driver i2400m_usb
[   11.829903] systemd-udevd[153]: renamed network interface wmx0 to enp0s29u1u5
[   12.149748] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[   13.116693] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[   13.307548] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[   13.319960] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   13.320708] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   13.321143] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   13.696488] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   13.696921] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[   13.780565] systemd-journald[125]: File /var/log/journal/bd7e7f7e534d4f46aefc08962d6a97b1/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   13.963491] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   13.963852] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u5: link is not ready
[   15.174320] systemd-logind[229]: Watching system buttons on /dev/input/event3 (Power Button)
[   15.174567] systemd-logind[229]: Watching system buttons on /dev/input/event12 (Video Bus)
[   15.174793] systemd-logind[229]: Watching system buttons on /dev/input/event2 (Power Button)
[   15.175137] systemd-logind[229]: Watching system buttons on /dev/input/event1 (Lid Switch)
[   23.929923] wlp2s0: authenticate with c0:3f:0e:6d:5e:a6
[   23.940834] wlp2s0: send auth to c0:3f:0e:6d:5e:a6 (try 1/3)
[   23.942836] wlp2s0: authenticated
[   23.945097] wlp2s0: associate with c0:3f:0e:6d:5e:a6 (try 1/3)
[   23.961094] wlp2s0: RX AssocResp from c0:3f:0e:6d:5e:a6 (capab=0x411 status=0 aid=1)
[   23.966167] wlp2s0: associated
[   23.966261] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   24.007626] wlp2s0: deauthenticating from c0:3f:0e:6d:5e:a6 by local choice (reason=3)
[   24.020822] cfg80211: Calling CRDA to update world regulatory domain
[   30.429112] wlp2s0: authenticate with c0:3f:0e:6d:5e:a6
[   30.432022] wlp2s0: send auth to c0:3f:0e:6d:5e:a6 (try 1/3)
[   30.435842] wlp2s0: authenticated
[   30.439189] wlp2s0: associate with c0:3f:0e:6d:5e:a6 (try 1/3)
[   30.452799] wlp2s0: RX AssocResp from c0:3f:0e:6d:5e:a6 (capab=0x411 status=0 aid=1)
[   30.457124] wlp2s0: associated
[   30.845596] wlp2s0: deauthenticating from c0:3f:0e:6d:5e:a6 by local choice (reason=3)
[   30.861654] cfg80211: Calling CRDA to update world regulatory domain
[   35.820777] fuse init (API version 7.20)
[   37.387241] wlp2s0: authenticate with c0:3f:0e:6d:5e:a6
[   37.390171] wlp2s0: send auth to c0:3f:0e:6d:5e:a6 (try 1/3)
[   37.392101] wlp2s0: authenticated
[   37.393224] wlp2s0: associate with c0:3f:0e:6d:5e:a6 (try 1/3)
[   37.395966] wlp2s0: RX AssocResp from c0:3f:0e:6d:5e:a6 (capab=0x411 status=0 aid=1)
[   37.400261] wlp2s0: associated
[   44.385752] wlp2s0: deauthenticating from c0:3f:0e:6d:5e:a6 by local choice (reason=3)
[   44.409248] cfg80211: Calling CRDA to update world regulatory domain
[   47.394188] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[   47.568029] wlp2s0: authenticate with c0:3f:0e:6d:5e:a6
[   47.571226] wlp2s0: send auth to c0:3f:0e:6d:5e:a6 (try 1/3)
[   47.573145] wlp2s0: authenticated
[   47.576007] wlp2s0: associate with c0:3f:0e:6d:5e:a6 (try 1/3)
[   47.606314] wlp2s0: RX AssocResp from c0:3f:0e:6d:5e:a6 (capab=0x411 status=0 aid=1)
[   47.610506] wlp2s0: associated
[   47.652937] wlp2s0: deauthenticating from c0:3f:0e:6d:5e:a6 by local choice (reason=3)
[   47.687807] cfg80211: Calling CRDA to update world regulatory domain
[   57.341041] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[  351.288247] wlp2s0: authenticate with c0:3f:0e:6d:5e:a6
[  351.291449] wlp2s0: send auth to c0:3f:0e:6d:5e:a6 (try 1/3)
[  351.293497] wlp2s0: authenticated
[  351.297230] wlp2s0: associate with c0:3f:0e:6d:5e:a6 (try 1/3)
[  351.299983] wlp2s0: RX AssocResp from c0:3f:0e:6d:5e:a6 (capab=0x411 status=0 aid=1)
[  351.304599] wlp2s0: associated
[ 9910.247325] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[ 9910.333760] scsi7 : usb-storage 2-1.2:1.0
[ 9910.938353] usb 2-1.2: USB disconnect, device number 4
[ 9911.123789] usb 2-1.2: new high-speed USB device number 5 using ehci-pci
[ 9911.210510] scsi8 : usb-storage 2-1.2:1.0
[ 9912.214295] scsi 8:0:0:0: Direct-Access     Samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[ 9912.217831] sd 8:0:0:0: [sdc] 344064 512-byte logical blocks: (176 MB/168 MiB)
[ 9912.218575] sd 8:0:0:0: [sdc] Write Protect is off
[ 9912.218591] sd 8:0:0:0: [sdc] Mode Sense: 0f 00 00 00
[ 9912.219311] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9912.224464]  sdc: sdc1
[ 9912.229953] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[11365.421042] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[11365.655838] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[11371.753513] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[11371.840173] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[18157.680677] usb 2-1.2: USB disconnect, device number 5
[18157.682301] sd 8:0:0:0: [sdc] Synchronizing SCSI cache
[18157.683558] sd 8:0:0:0: [sdc]  
[18157.683570] Result: hostbyte=0x01 driverbyte=0x00
[46898.811164] wlp2s0: deauthenticating from c0:3f:0e:6d:5e:a6 by local choice (reason=3)
[46898.819939] cfg80211: Calling CRDA to update world regulatory domain
[46910.743300] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[46903.887279] PM: Syncing filesystems ... done.
[46910.772671] PM: Preparing system for mem sleep
[46910.780596] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[46911.639033] i2400m_usb 2-1.5:1.0: firmware i6050-fw-usb-1.5.sbcf: cached
[46911.639049] Freezing user space processes ... (elapsed 0.42 seconds) done.
[46912.065523] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[46912.078835] PM: Entering mem sleep
[46912.079038] Suspending console(s) (use no_console_suspend to debug)
[46912.080412] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[46912.177148] sd 0:0:0:0: [sda] Stopping disk
[46912.815288] PM: suspend of devices complete after 735.739 msecs
[46912.815672] PM: late suspend of devices complete after 0.381 msecs
[46912.865035] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[46912.878483] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[46912.905171] PM: noirq suspend of devices complete after 89.514 msecs
[46912.905518] ACPI: Preparing to enter system sleep state S3
[46912.988354] PM: Saving platform NVS memory
[46912.998618] Disabling non-boot CPUs ...
[46913.000282] smpboot: CPU 1 is now offline
[46913.002629] smpboot: CPU 2 is now offline
[46913.005582] smpboot: CPU 3 is now offline
[46913.006925] Extended CMOS year: 2000
[46913.008350] ACPI: Low-level resume complete
[46913.008477] PM: Restoring platform NVS memory
[46913.009493] Extended CMOS year: 2000
[46913.009572] CPU0: Thermal monitoring handled by SMI
[46913.009658] Enabling non-boot CPUs ...
[46913.013199] smpboot: Booting Node 0 Processor 1 APIC 0x1
[46913.024390] CPU1: Thermal monitoring handled by SMI
[46913.027461] CPU1 is up
[46913.027644] smpboot: Booting Node 0 Processor 2 APIC 0x4
[46913.038807] CPU2: Thermal monitoring handled by SMI
[46913.041898] CPU2 is up
[46913.042064] smpboot: Booting Node 0 Processor 3 APIC 0x5
[46913.053123] CPU3: Thermal monitoring handled by SMI
[46913.055890] CPU3 is up
[46913.060090] ACPI: Waking up from system sleep state S3
[46913.137609] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[46913.174127] i2400m_usb 2-1.5:1.0: timeout waiting for reply to message 0x5606
[46913.174135] i2400m_usb 2-1.5:1.0: Failed to issue 'Enter power save' command: -110
[46913.180829] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[46913.221698] PM: noirq resume of devices complete after 124.105 msecs
[46913.222474] PM: early resume of devices complete after 0.659 msecs
[46913.222576] i915 0000:00:02.0: setting latency timer to 64
[46913.222648] ehci-pci 0000:00:1a.0: setting latency timer to 64
[46913.222702] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[46913.222858] ehci-pci 0000:00:1d.0: setting latency timer to 64
[46913.222920] pci 0000:00:1e.0: setting latency timer to 64
[46913.222940] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[46913.222950] ahci 0000:00:1f.2: setting latency timer to 64
[46913.434222] usb 2-1.5: reset high-speed USB device number 3 using ehci-pci
[46913.518458] i2400m_usb 2-1.5:1.0: device reset on resume: reinitializing driver
[46913.518764] i2400m_usb 2-1.5:1.0: firmware i6050-fw-usb-1.5.sbcf: loading from cache
[46913.584269] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci
[46913.734291] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[46914.180481] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[46914.182516] ata1.00: configured for UDMA/100
[46914.193952] sd 0:0:0:0: [sda] Starting disk
[46914.216246] PM: resume of devices complete after 994.127 msecs
[46914.218268] PM: Finishing wakeup.
[46914.218272] Restarting tasks ... done.
[46914.239059] video LNXVIDEO:00: Restoring backlight state
[46916.846147] i2400m_usb 2-1.5:1.0: firmware interface version 9.3.2
[46918.812536] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[46918.826237] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[46918.830980] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[46918.831190] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[46919.118909] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[46919.156554] IPv6: ADDRCONF(NETDEV_UP): enp0s29u1u5: link is not ready
[46926.341679] wlp2s0: authenticate with c0:3f:0e:6d:5e:a6
[46926.350831] wlp2s0: send auth to c0:3f:0e:6d:5e:a6 (try 1/3)
[46926.352761] wlp2s0: authenticated
[46926.355849] wlp2s0: associate with c0:3f:0e:6d:5e:a6 (try 1/3)
[46926.358682] wlp2s0: RX AssocResp from c0:3f:0e:6d:5e:a6 (capab=0x411 status=0 aid=1)
[46926.363472] wlp2s0: associated
[46926.363570] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[49373.766907] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[49374.199421] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[53216.446640] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[53216.977402] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600
[54311.161106] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0
[54311.405906] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=0
[54910.893310] Compat-drivers backport release: compat-drivers-v3.9-rc4-2-su
[54910.893332] Backport based on linux-stable.git v3.9-rc4
[54910.893337] compat.git: linux-stable.git
[54910.895015] Qualcomm Atheros(R) AR816x/AR817x PCI-E Ethernet Network Driver>

xorglogs code:

<
[    15.626] 
X.Org X Server 1.14.1
Release Date: 2013-04-17
[    15.626] X Protocol Version 11, Revision 0
[    15.626] Build Operating System: Linux 3.8.7-1-ARCH x86_64 
[    15.626] Current Operating System: Linux arceus 3.8.10-1-ARCH #1 SMP PREEMPT Sat Apr 27 12:36:59 CEST 2013 x86_64
[    15.626] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b2de9258-9905-467e-8e49-312a09025ed1 ro quiet
[    15.626] Build Date: 17 April 2013  02:37:06PM
[    15.626]  
[    15.626] Current version of pixman: 0.28.2
[    15.626]     Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
[    15.626] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.627] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 29 23:30:53 2013
[    15.712] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.712] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.936] (==) No Layout section.  Using the first Screen section.
[    15.936] (==) No screen section available. Using defaults.
[    15.936] (**) |-->Screen "Default Screen Section" (0)
[    15.937] (**) |   |-->Monitor "<default monitor>"
[    15.937] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    15.937] (==) Automatically adding devices
[    15.937] (==) Automatically enabling devices
[    15.937] (==) Automatically adding GPU devices
[    16.016] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    16.016]     Entry deleted from font path.
[    16.072] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    16.072] (==) ModulePath set to "/usr/lib/xorg/modules"
[    16.072] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.097] (II) Loader magic: 0x7fcc20
[    16.097] (II) Module ABI versions:
[    16.097]     X.Org ANSI C Emulation: 0.4
[    16.097]     X.Org Video Driver: 14.1
[    16.097]     X.Org XInput driver : 19.1
[    16.097]     X.Org Server Extension : 7.0
[    16.098] (II) config/udev: Adding drm device (/dev/dri/card0)
[    16.104] (--) PCI:*(0:0:2:0) 8086:0046:1028:0471 rev 2, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00002078/8
[    16.114] Initializing built-in extension Generic Event Extension
[    16.114] Initializing built-in extension SHAPE
[    16.114] Initializing built-in extension MIT-SHM
[    16.114] Initializing built-in extension XInputExtension
[    16.114] Initializing built-in extension XTEST
[    16.114] Initializing built-in extension BIG-REQUESTS
[    16.114] Initializing built-in extension SYNC
[    16.114] Initializing built-in extension XKEYBOARD
[    16.114] Initializing built-in extension XC-MISC
[    16.115] Initializing built-in extension SECURITY
[    16.115] Initializing built-in extension XINERAMA
[    16.115] Initializing built-in extension XFIXES
[    16.115] Initializing built-in extension RENDER
[    16.115] Initializing built-in extension RANDR
[    16.115] Initializing built-in extension COMPOSITE
[    16.115] Initializing built-in extension DAMAGE
[    16.115] Initializing built-in extension MIT-SCREEN-SAVER
[    16.115] Initializing built-in extension DOUBLE-BUFFER
[    16.115] Initializing built-in extension RECORD
[    16.115] Initializing built-in extension DPMS
[    16.115] Initializing built-in extension X-Resource
[    16.115] Initializing built-in extension XVideo
[    16.115] Initializing built-in extension XVideo-MotionCompensation
[    16.115] Initializing built-in extension XFree86-VidModeExtension
[    16.115] Initializing built-in extension XFree86-DGA
[    16.115] Initializing built-in extension XFree86-DRI
[    16.115] Initializing built-in extension DRI2
[    16.115] (II) "glx" will be loaded by default.
[    16.115] (II) LoadModule: "dri2"
[    16.116] (II) Module "dri2" already built-in
[    16.116] (II) LoadModule: "glamoregl"
[    16.135] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    16.647] (II) Module glamoregl: vendor="X.Org Foundation"
[    16.647]     compiled for 1.14.0, module version = 0.5.0
[    16.647]     ABI class: X.Org ANSI C Emulation, version 0.4
[    16.647] (II) LoadModule: "glx"
[    16.713] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.734] (II) Module glx: vendor="X.Org Foundation"
[    16.735]     compiled for 1.14.1, module version = 1.0.0
[    16.735]     ABI class: X.Org Server Extension, version 7.0
[    16.735] (==) AIGLX enabled
[    16.735] Loading extension GLX
[    16.735] (==) Matched intel as autoconfigured driver 0
[    16.735] (==) Matched intel as autoconfigured driver 1
[    16.735] (==) Matched vesa as autoconfigured driver 2
[    16.735] (==) Matched modesetting as autoconfigured driver 3
[    16.735] (==) Matched fbdev as autoconfigured driver 4
[    16.735] (==) Assigned the driver to the xf86ConfigLayout
[    16.736] (II) LoadModule: "intel"
[    16.736] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.796] (II) Module intel: vendor="X.Org Foundation"
[    16.796]     compiled for 1.14.0, module version = 2.21.6
[    16.796]     Module class: X.Org Video Driver
[    16.796]     ABI class: X.Org Video Driver, version 14.1
[    16.796] (II) LoadModule: "vesa"
[    16.796] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.814] (II) Module vesa: vendor="X.Org Foundation"
[    16.814]     compiled for 1.14.0, module version = 2.3.2
[    16.814]     Module class: X.Org Video Driver
[    16.814]     ABI class: X.Org Video Driver, version 14.1
[    16.814] (II) LoadModule: "modesetting"
[    16.815] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    16.839] (II) Module modesetting: vendor="X.Org Foundation"
[    16.839]     compiled for 1.14.0, module version = 0.7.0
[    16.839]     Module class: X.Org Video Driver
[    16.839]     ABI class: X.Org Video Driver, version 14.1
[    16.840] (II) LoadModule: "fbdev"
[    16.840] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.850] (II) Module fbdev: vendor="X.Org Foundation"
[    16.850]     compiled for 1.14.0, module version = 0.4.3
[    16.850]     Module class: X.Org Video Driver
[    16.850]     ABI class: X.Org Video Driver, version 14.1
[    16.850] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
[    16.853] (II) VESA: driver for VESA chipsets: vesa
[    16.853] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.853] (II) FBDEV: driver for framebuffer: fbdev
[    16.853] (++) using VT number 7

[    16.865] (WW) Falling back to old probe method for vesa
[    16.865] (WW) Falling back to old probe method for modesetting
[    16.865] (WW) Falling back to old probe method for fbdev
[    16.865] (II) Loading sub module "fbdevhw"
[    16.865] (II) LoadModule: "fbdevhw"
[    16.866] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.881] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.881]     compiled for 1.14.1, module version = 0.0.2
[    16.881]     ABI class: X.Org Video Driver, version 14.1
[    16.881] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    16.882] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    16.882] (==) intel(0): RGB weight 888
[    16.882] (==) intel(0): Default visual is TrueColor
[    16.882] (--) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[    16.882] (**) intel(0): Relaxed fencing enabled
[    16.882] (**) intel(0): Wait on SwapBuffers? enabled
[    16.882] (**) intel(0): Triple buffering? enabled
[    16.882] (**) intel(0): Framebuffer tiled
[    16.882] (**) intel(0): Pixmaps tiled
[    16.882] (**) intel(0): 3D buffers tiled
[    16.883] (**) intel(0): SwapBuffers wait enabled
[    16.883] (==) intel(0): video overlay key set to 0x101fe
[    16.883] (II) intel(0): Output LVDS1 has no monitor section
[    16.903] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[    16.917] (II) intel(0): Output VGA1 has no monitor section
[    16.930] (II) intel(0): Output HDMI1 has no monitor section
[    16.970] (II) intel(0): Output DP1 has no monitor section
[    16.970] (II) intel(0): EDID for output LVDS1
[    16.970] (II) intel(0): Manufacturer: CMO  Model: 1111  Serial#: 0
[    16.970] (II) intel(0): Year: 2010  Week: 24
[    16.970] (II) intel(0): EDID Version: 1.3
[    16.971] (II) intel(0): Digital Display Input
[    16.971] (II) intel(0): Max Image Size [cm]: horiz.: 25  vert.: 14
[    16.971] (II) intel(0): Gamma: 2.20
[    16.971] (II) intel(0): No DPMS capabilities specified
[    16.971] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    16.971] (II) intel(0): First detailed timing is preferred mode
[    16.971] (II) intel(0): redX: 0.573 redY: 0.358   greenX: 0.339 greenY: 0.568
[    16.971] (II) intel(0): blueX: 0.153 blueY: 0.124   whiteX: 0.313 whiteY: 0.329
[    16.971] (II) intel(0): Manufacturer's mask: 0
[    16.971] (II) intel(0): Supported detailed timing:
[    16.971] (II) intel(0): clock: 69.3 MHz   Image Size:  256 x 144 mm
[    16.971] (II) intel(0): h_active: 1366  h_sync: 1398  h_sync_end 1420 h_blank_end 1474 h_border: 0
[    16.971] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 774 v_blanking: 784 v_border: 0
[    16.971] (II) intel(0):  HF9D2€N116B6
[    16.971] (II) intel(0): Unknown vendor-specific block 0
[    16.971] (II) intel(0): EDID (in hex):
[    16.971] (II) intel(0):     00ffffffffffff000daf111100000000
[    16.972] (II) intel(0):     1814010390190e780afe75925b569127
[    16.972] (II) intel(0):     1f505400000001010101010101010101
[    16.972] (II) intel(0):     010101010101121b566c500010302016
[    16.972] (II) intel(0):     240000901000001a0000000000000000
[    16.972] (II) intel(0):     00000000000000000000000000fe0048
[    16.972] (II) intel(0):     46394432804e31313642360a00000000
[    16.972] (II) intel(0):     00000000000000000001010a2020007c
[    16.972] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    16.972] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.972] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    16.972] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    16.972] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    16.973] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    16.973] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    16.973] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    16.973] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    16.973] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    16.973] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    16.973] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    16.973] (II) intel(0): Printing probed modes for output LVDS1
[    16.973] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[    16.973] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    16.973] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    16.973] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    16.973] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    16.987] (II) intel(0): EDID for output VGA1
[    17.000] (II) intel(0): EDID for output HDMI1
[    17.046] (II) intel(0): EDID for output DP1
[    17.046] (II) intel(0): Output LVDS1 connected
[    17.047] (II) intel(0): Output VGA1 disconnected
[    17.047] (II) intel(0): Output HDMI1 disconnected
[    17.047] (II) intel(0): Output DP1 disconnected
[    17.047] (II) intel(0): Using exact sizes for initial modes
[    17.047] (II) intel(0): Output LVDS1 using initial mode 1366x768
[    17.047] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    17.047] (II) intel(0): Kernel page flipping support detected, enabling
[    17.047] (==) intel(0): DPI set to (96, 96)
[    17.047] (II) Loading sub module "fb"
[    17.047] (II) LoadModule: "fb"
[    17.048] (II) Loading /usr/lib/xorg/modules/libfb.so
[    17.067] (II) Module fb: vendor="X.Org Foundation"
[    17.067]     compiled for 1.14.1, module version = 1.0.0
[    17.067]     ABI class: X.Org ANSI C Emulation, version 0.4
[    17.067] (II) Loading sub module "dri2"
[    17.067] (II) LoadModule: "dri2"
[    17.067] (II) Module "dri2" already built-in
[    17.067] (II) UnloadModule: "vesa"
[    17.067] (II) Unloading vesa
[    17.067] (II) UnloadModule: "modesetting"
[    17.067] (II) Unloading modesetting
[    17.067] (II) UnloadModule: "fbdev"
[    17.067] (II) Unloading fbdev
[    17.068] (II) UnloadSubModule: "fbdevhw"
[    17.068] (II) Unloading fbdevhw
[    17.068] (==) Depth 24 pixmap format is 32 bpp
[    17.100] (II) intel(0): [DRI2] Setup complete
[    17.100] (II) intel(0): [DRI2]   DRI driver: i965
[    17.100] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[    17.129] (II) UXA(0): Driver registered support for the following operations:
[    17.129] (II)         solid
[    17.129] (II)         copy
[    17.129] (II)         composite (RENDER acceleration)
[    17.130] (II)         put_image
[    17.130] (II)         get_image
[    17.130] (==) intel(0): Backing store disabled
[    17.130] (==) intel(0): Silken mouse enabled
[    17.147] (II) intel(0): Initializing HW Cursor
[    17.147] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    17.227] (==) intel(0): DPMS enabled
[    17.227] (==) intel(0): Intel XvMC decoder enabled
[    17.228] (II) intel(0): Set up textured video
[    17.228] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    17.228] (II) intel(0): direct rendering: DRI2 Enabled
[    17.228] (==) intel(0): hotplug detection: "enabled"
[    17.260] (--) RandR disabled
[    17.528] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    17.528] (II) AIGLX: enabled GLX_INTEL_swap_event
[    17.528] (II) AIGLX: enabled GLX_ARB_create_context
[    17.528] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    17.528] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    17.528] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    17.528] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    17.528] (II) AIGLX: Loaded and initialized i965
[    17.528] (II) GLX: Initialized DRI2 GL provider for screen 0
[    17.529] (II) intel(0): Setting screen physical size to 361 x 203
[    18.168] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    18.168] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.168] (II) LoadModule: "evdev"
[    18.169] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.180] (II) Module evdev: vendor="X.Org Foundation"
[    18.181]     compiled for 1.14.0, module version = 2.8.0
[    18.181]     Module class: X.Org XInput Driver
[    18.181]     ABI class: X.Org XInput driver, version 19.1
[    18.181] (II) Using input driver 'evdev' for 'Power Button'
[    18.181] (**) Power Button: always reports core events
[    18.181] (**) evdev: Power Button: Device: "/dev/input/event3"
[    18.181] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.181] (--) evdev: Power Button: Found keys
[    18.181] (II) evdev: Power Button: Configuring as keyboard
[    18.181] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    18.181] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    18.181] (**) Option "xkb_rules" "evdev"
[    18.181] (**) Option "xkb_model" "evdev"
[    18.181] (**) Option "xkb_layout" "us"
[    18.266] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    18.266] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.266] (II) Using input driver 'evdev' for 'Video Bus'
[    18.266] (**) Video Bus: always reports core events
[    18.266] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    18.266] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    18.266] (--) evdev: Video Bus: Found keys
[    18.266] (II) evdev: Video Bus: Configuring as keyboard
[    18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
[    18.267] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    18.267] (**) Option "xkb_rules" "evdev"
[    18.267] (**) Option "xkb_model" "evdev"
[    18.267] (**) Option "xkb_layout" "us"
[    18.268] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.269] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.269] (II) Using input driver 'evdev' for 'Power Button'
[    18.269] (**) Power Button: always reports core events
[    18.269] (**) evdev: Power Button: Device: "/dev/input/event2"
[    18.269] (--) evdev: Power Button: Vendor 0 Product 0x1
[    18.269] (--) evdev: Power Button: Found keys
[    18.269] (II) evdev: Power Button: Configuring as keyboard
[    18.269] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[    18.269] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    18.269] (**) Option "xkb_rules" "evdev"
[    18.269] (**) Option "xkb_model" "evdev"
[    18.269] (**) Option "xkb_layout" "us"
[    18.271] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    18.272] (II) No input driver specified, ignoring this device.
[    18.272] (II) This device may have been added with another device file.
[    18.272] (II) config/udev: Adding drm device (/dev/dri/card0)
[    18.274] (II) config/udev: Adding input device Integrated Webcam (/dev/input/event10)
[    18.274] (**) Integrated Webcam: Applying InputClass "evdev keyboard catchall"
[    18.274] (II) Using input driver 'evdev' for 'Integrated Webcam'
[    18.274] (**) Integrated Webcam: always reports core events
[    18.274] (**) evdev: Integrated Webcam: Device: "/dev/input/event10"
[    18.274] (--) evdev: Integrated Webcam: Vendor 0x174f Product 0x143b
[    18.274] (--) evdev: Integrated Webcam: Found keys
[    18.275] (II) evdev: Integrated Webcam: Configuring as keyboard
[    18.275] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[    18.275] (II) XINPUT: Adding extended input device "Integrated Webcam" (type: KEYBOARD, id 9)
[    18.275] (**) Option "xkb_rules" "evdev"
[    18.275] (**) Option "xkb_model" "evdev"
[    18.275] (**) Option "xkb_layout" "us"
[    18.277] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    18.277] (II) No input driver specified, ignoring this device.
[    18.277] (II) This device may have been added with another device file.
[    18.277] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event7)
[    18.278] (II) No input driver specified, ignoring this device.
[    18.278] (II) This device may have been added with another device file.
[    18.278] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event8)
[    18.278] (II) No input driver specified, ignoring this device.
[    18.278] (II) This device may have been added with another device file.
[    18.279] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event9)
[    18.279] (II) No input driver specified, ignoring this device.
[    18.279] (II) This device may have been added with another device file.
[    18.279] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.280] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.280] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.280] (**) AT Translated Set 2 keyboard: always reports core events
[    18.280] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    18.280] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    18.280] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    18.280] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    18.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.280] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    18.280] (**) Option "xkb_rules" "evdev"
[    18.280] (**) Option "xkb_model" "evdev"
[    18.280] (**) Option "xkb_layout" "us"
[    18.281] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    18.281] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    18.282] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    18.282] (II) No input driver specified, ignoring this device.
[    18.282] (II) This device may have been added with another device file.
[    18.282] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    18.282] (II) No input driver specified, ignoring this device.
[    18.282] (II) This device may have been added with another device file.
[    18.284] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
[    18.284] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    18.284] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    18.284] (**) Dell WMI hotkeys: always reports core events
[    18.284] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
[    18.284] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    18.284] (--) evdev: Dell WMI hotkeys: Found keys
[    18.284] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    18.284] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[    18.284] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 11)
[    18.284] (**) Option "xkb_rules" "evdev"
[    18.284] (**) Option "xkb_model" "evdev"
[    18.284] (**) Option "xkb_layout" "us"
[    33.251] (II) intel(0): EDID vendor "CMO", prod id 4369
[    33.251] (II) intel(0): Printing DDC gathered Modelines:
[    33.251] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[    41.584] (II) intel(0): EDID vendor "CMO", prod id 4369
[    41.584] (II) intel(0): Printing DDC gathered Modelines:
[    41.584] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[    54.927] (II) intel(0): EDID vendor "CMO", prod id 4369
[    54.927] (II) intel(0): Printing DDC gathered Modelines:
[    54.928] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3105.526] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3105.526] (II) intel(0): Printing DDC gathered Modelines:
[  3105.526] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3105.995] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3105.995] (II) intel(0): Printing DDC gathered Modelines:
[  3105.995] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3106.297] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3106.297] (II) intel(0): Printing DDC gathered Modelines:
[  3106.298] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3106.621] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3106.621] (II) intel(0): Printing DDC gathered Modelines:
[  3106.621] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3106.938] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3106.938] (II) intel(0): Printing DDC gathered Modelines:
[  3106.938] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3107.251] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3107.251] (II) intel(0): Printing DDC gathered Modelines:
[  3107.251] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3107.565] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3107.565] (II) intel(0): Printing DDC gathered Modelines:
[  3107.565] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3108.391] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3108.391] (II) intel(0): Printing DDC gathered Modelines:
[  3108.391] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3108.700] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3108.700] (II) intel(0): Printing DDC gathered Modelines:
[  3108.701] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3108.992] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3108.992] (II) intel(0): Printing DDC gathered Modelines:
[  3108.992] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3109.295] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3109.295] (II) intel(0): Printing DDC gathered Modelines:
[  3109.295] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3109.602] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3109.602] (II) intel(0): Printing DDC gathered Modelines:
[  3109.602] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3109.907] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3109.908] (II) intel(0): Printing DDC gathered Modelines:
[  3109.908] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3110.221] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3110.221] (II) intel(0): Printing DDC gathered Modelines:
[  3110.221] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3110.517] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3110.517] (II) intel(0): Printing DDC gathered Modelines:
[  3110.518] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3111.315] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3111.316] (II) intel(0): Printing DDC gathered Modelines:
[  3111.316] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3111.616] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3111.616] (II) intel(0): Printing DDC gathered Modelines:
[  3111.616] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3112.422] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3112.422] (II) intel(0): Printing DDC gathered Modelines:
[  3112.422] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3112.719] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3112.719] (II) intel(0): Printing DDC gathered Modelines:
[  3112.719] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3113.041] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3113.041] (II) intel(0): Printing DDC gathered Modelines:
[  3113.041] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3113.343] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3113.343] (II) intel(0): Printing DDC gathered Modelines:
[  3113.343] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3113.638] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3113.639] (II) intel(0): Printing DDC gathered Modelines:
[  3113.639] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3113.929] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3113.929] (II) intel(0): Printing DDC gathered Modelines:
[  3113.929] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3114.235] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3114.236] (II) intel(0): Printing DDC gathered Modelines:
[  3114.236] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3114.539] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3114.539] (II) intel(0): Printing DDC gathered Modelines:
[  3114.539] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3114.779] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3114.780] (II) intel(0): Printing DDC gathered Modelines:
[  3114.780] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3115.581] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3115.581] (II) intel(0): Printing DDC gathered Modelines:
[  3115.581] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3115.872] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3115.872] (II) intel(0): Printing DDC gathered Modelines:
[  3115.872] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3116.180] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3116.180] (II) intel(0): Printing DDC gathered Modelines:
[  3116.180] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3116.503] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3116.503] (II) intel(0): Printing DDC gathered Modelines:
[  3116.503] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3116.640] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3116.640] (II) intel(0): Printing DDC gathered Modelines:
[  3116.640] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3116.948] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3116.948] (II) intel(0): Printing DDC gathered Modelines:
[  3116.949] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3117.096] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3117.096] (II) intel(0): Printing DDC gathered Modelines:
[  3117.096] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3117.417] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3117.417] (II) intel(0): Printing DDC gathered Modelines:
[  3117.417] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3117.753] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3117.753] (II) intel(0): Printing DDC gathered Modelines:
[  3117.753] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3118.132] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3118.132] (II) intel(0): Printing DDC gathered Modelines:
[  3118.132] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3118.318] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3118.319] (II) intel(0): Printing DDC gathered Modelines:
[  3118.319] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3118.457] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3118.457] (II) intel(0): Printing DDC gathered Modelines:
[  3118.457] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3118.638] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3118.638] (II) intel(0): Printing DDC gathered Modelines:
[  3118.638] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3118.779] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3118.780] (II) intel(0): Printing DDC gathered Modelines:
[  3118.780] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3118.934] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3118.935] (II) intel(0): Printing DDC gathered Modelines:
[  3118.935] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3119.596] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3119.596] (II) intel(0): Printing DDC gathered Modelines:
[  3119.596] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3119.759] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3119.759] (II) intel(0): Printing DDC gathered Modelines:
[  3119.759] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3119.878] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3119.878] (II) intel(0): Printing DDC gathered Modelines:
[  3119.878] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3119.989] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3119.989] (II) intel(0): Printing DDC gathered Modelines:
[  3119.989] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3120.110] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3120.110] (II) intel(0): Printing DDC gathered Modelines:
[  3120.110] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3120.232] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3120.232] (II) intel(0): Printing DDC gathered Modelines:
[  3120.232] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3120.351] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3120.351] (II) intel(0): Printing DDC gathered Modelines:
[  3120.352] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3120.507] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3120.507] (II) intel(0): Printing DDC gathered Modelines:
[  3120.507] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3120.603] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3120.603] (II) intel(0): Printing DDC gathered Modelines:
[  3120.603] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3121.281] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3121.281] (II) intel(0): Printing DDC gathered Modelines:
[  3121.281] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3121.421] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3121.421] (II) intel(0): Printing DDC gathered Modelines:
[  3121.421] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3121.538] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3121.538] (II) intel(0): Printing DDC gathered Modelines:
[  3121.538] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3121.655] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3121.655] (II) intel(0): Printing DDC gathered Modelines:
[  3121.655] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3121.773] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3121.773] (II) intel(0): Printing DDC gathered Modelines:
[  3121.773] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3121.893] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3121.893] (II) intel(0): Printing DDC gathered Modelines:
[  3121.893] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.014] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.015] (II) intel(0): Printing DDC gathered Modelines:
[  3122.015] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.129] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.129] (II) intel(0): Printing DDC gathered Modelines:
[  3122.129] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.269] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.269] (II) intel(0): Printing DDC gathered Modelines:
[  3122.269] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.385] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.385] (II) intel(0): Printing DDC gathered Modelines:
[  3122.385] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.499] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.500] (II) intel(0): Printing DDC gathered Modelines:
[  3122.500] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.613] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.613] (II) intel(0): Printing DDC gathered Modelines:
[  3122.613] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.729] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.730] (II) intel(0): Printing DDC gathered Modelines:
[  3122.730] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.844] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.844] (II) intel(0): Printing DDC gathered Modelines:
[  3122.844] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3122.958] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3122.958] (II) intel(0): Printing DDC gathered Modelines:
[  3122.959] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3123.089] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3123.089] (II) intel(0): Printing DDC gathered Modelines:
[  3123.089] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3123.203] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3123.203] (II) intel(0): Printing DDC gathered Modelines:
[  3123.203] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3123.322] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3123.322] (II) intel(0): Printing DDC gathered Modelines:
[  3123.322] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3123.432] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3123.432] (II) intel(0): Printing DDC gathered Modelines:
[  3123.432] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3123.547] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3123.548] (II) intel(0): Printing DDC gathered Modelines:
[  3123.548] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3123.661] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3123.661] (II) intel(0): Printing DDC gathered Modelines:
[  3123.661] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3123.797] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3123.797] (II) intel(0): Printing DDC gathered Modelines:
[  3123.797] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3124.431] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3124.432] (II) intel(0): Printing DDC gathered Modelines:
[  3124.432] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3124.546] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3124.546] (II) intel(0): Printing DDC gathered Modelines:
[  3124.546] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[  3125.181] (II) intel(0): EDID vendor "CMO", prod id 4369
[  3125.181] (II) intel(0): Printing DDC gathered Modelines:
[  3125.181] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17395.969] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17396.011] (II) intel(0): Printing DDC gathered Modelines:
[ 17396.011] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17396.334] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17396.334] (II) intel(0): Printing DDC gathered Modelines:
[ 17396.334] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17396.593] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17396.593] (II) intel(0): Printing DDC gathered Modelines:
[ 17396.593] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17396.730] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17396.730] (II) intel(0): Printing DDC gathered Modelines:
[ 17396.730] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17397.497] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17397.497] (II) intel(0): Printing DDC gathered Modelines:
[ 17397.497] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17397.633] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17397.633] (II) intel(0): Printing DDC gathered Modelines:
[ 17397.633] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17397.813] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17397.813] (II) intel(0): Printing DDC gathered Modelines:
[ 17397.813] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17397.965] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17397.965] (II) intel(0): Printing DDC gathered Modelines:
[ 17397.965] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17398.106] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17398.106] (II) intel(0): Printing DDC gathered Modelines:
[ 17398.106] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17398.242] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17398.242] (II) intel(0): Printing DDC gathered Modelines:
[ 17398.242] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17398.354] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17398.354] (II) intel(0): Printing DDC gathered Modelines:
[ 17398.354] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17398.499] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17398.499] (II) intel(0): Printing DDC gathered Modelines:
[ 17398.499] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17398.633] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17398.633] (II) intel(0): Printing DDC gathered Modelines:
[ 17398.633] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17398.724] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17398.724] (II) intel(0): Printing DDC gathered Modelines:
[ 17398.724] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17398.862] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17398.862] (II) intel(0): Printing DDC gathered Modelines:
[ 17398.862] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17399.500] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17399.500] (II) intel(0): Printing DDC gathered Modelines:
[ 17399.500] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17399.633] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17399.633] (II) intel(0): Printing DDC gathered Modelines:
[ 17399.633] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17399.768] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17399.768] (II) intel(0): Printing DDC gathered Modelines:
[ 17399.768] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17399.927] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17399.927] (II) intel(0): Printing DDC gathered Modelines:
[ 17399.927] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17400.540] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17400.541] (II) intel(0): Printing DDC gathered Modelines:
[ 17400.541] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17401.152] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17401.152] (II) intel(0): Printing DDC gathered Modelines:
[ 17401.152] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17402.860] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17402.860] (II) intel(0): Printing DDC gathered Modelines:
[ 17402.860] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 17403.381] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 17403.381] (II) intel(0): Printing DDC gathered Modelines:
[ 17403.381] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21313.662] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21313.791] (II) intel(0): Printing DDC gathered Modelines:
[ 21313.791] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21314.072] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21314.072] (II) intel(0): Printing DDC gathered Modelines:
[ 21314.072] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21315.219] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21315.219] (II) intel(0): Printing DDC gathered Modelines:
[ 21315.219] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21315.481] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21315.482] (II) intel(0): Printing DDC gathered Modelines:
[ 21315.482] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21315.744] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21315.744] (II) intel(0): Printing DDC gathered Modelines:
[ 21315.744] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21315.876] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21315.876] (II) intel(0): Printing DDC gathered Modelines:
[ 21315.876] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21316.360] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21316.360] (II) intel(0): Printing DDC gathered Modelines:
[ 21316.360] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21316.455] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21316.455] (II) intel(0): Printing DDC gathered Modelines:
[ 21316.455] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21317.054] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21317.054] (II) intel(0): Printing DDC gathered Modelines:
[ 21317.055] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21317.590] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21317.590] (II) intel(0): Printing DDC gathered Modelines:
[ 21317.590] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21318.843] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21318.843] (II) intel(0): Printing DDC gathered Modelines:
[ 21318.843] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21319.466] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21319.467] (II) intel(0): Printing DDC gathered Modelines:
[ 21319.467] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21319.825] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21319.825] (II) intel(0): Printing DDC gathered Modelines:
[ 21319.826] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 21319.962] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 21319.962] (II) intel(0): Printing DDC gathered Modelines:
[ 21319.962] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 46916.637] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 46916.750] (II) intel(0): Printing DDC gathered Modelines:
[ 46916.750] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 46922.368] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 46922.776] (II) intel(0): Printing DDC gathered Modelines:
[ 46922.776] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 46927.882] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 46927.882] (II) intel(0): Printing DDC gathered Modelines:
[ 46927.882] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 46929.140] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 46931.959] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 46932.509] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 46932.509] (II) intel(0): Printing DDC gathered Modelines:
[ 46932.509] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 46938.062] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 46938.062] (II) intel(0): Printing DDC gathered Modelines:
[ 46938.062] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 46938.741] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 46938.741] (II) intel(0): Printing DDC gathered Modelines:
[ 46938.741] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47178.416] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47178.416] (II) intel(0): Printing DDC gathered Modelines:
[ 47178.416] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47666.714] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47666.714] (II) intel(0): Printing DDC gathered Modelines:
[ 47666.714] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47666.954] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47666.954] (II) intel(0): Printing DDC gathered Modelines:
[ 47666.954] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47667.221] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47667.221] (II) intel(0): Printing DDC gathered Modelines:
[ 47667.221] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47667.441] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47667.441] (II) intel(0): Printing DDC gathered Modelines:
[ 47667.442] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47667.656] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47667.656] (II) intel(0): Printing DDC gathered Modelines:
[ 47667.656] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47667.867] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47667.867] (II) intel(0): Printing DDC gathered Modelines:
[ 47667.867] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47668.062] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47668.062] (II) intel(0): Printing DDC gathered Modelines:
[ 47668.062] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47668.297] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47668.297] (II) intel(0): Printing DDC gathered Modelines:
[ 47668.297] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47668.506] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47668.506] (II) intel(0): Printing DDC gathered Modelines:
[ 47668.506] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47668.817] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47668.817] (II) intel(0): Printing DDC gathered Modelines:
[ 47668.817] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47669.052] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47669.052] (II) intel(0): Printing DDC gathered Modelines:
[ 47669.052] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47669.351] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47669.351] (II) intel(0): Printing DDC gathered Modelines:
[ 47669.351] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47669.605] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47669.605] (II) intel(0): Printing DDC gathered Modelines:
[ 47669.605] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47669.876] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47669.876] (II) intel(0): Printing DDC gathered Modelines:
[ 47669.877] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 47670.142] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 47670.142] (II) intel(0): Printing DDC gathered Modelines:
[ 47670.142] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 49280.192] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 49280.223] (II) intel(0): Printing DDC gathered Modelines:
[ 49280.224] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 49366.030] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 49366.030] (II) intel(0): Printing DDC gathered Modelines:
[ 49366.031] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 53646.426] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 53646.518] (II) intel(0): Printing DDC gathered Modelines:
[ 53646.518] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 54329.407] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 54329.407] (II) intel(0): Printing DDC gathered Modelines:
[ 54329.407] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
[ 54331.302] (II) intel(0): EDID vendor "CMO", prod id 4369
[ 54331.493] (II) intel(0): Printing DDC gathered Modelines:
[ 54331.493] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1398 1420 1474  768 770 774 784 +hsync -vsync (47.0 kHz eP)
>

lsmod code:

<
Module                  Size  Used by
alx                    61254  0 
compat                  1357  1 alx
mdio                    3525  1 alx
fuse                   68004  3 
joydev                  9695  0 
uvcvideo               72744  0 
videobuf2_vmalloc       3304  1 uvcvideo
videobuf2_memops        2367  1 videobuf2_vmalloc
videobuf2_core         27349  1 uvcvideo
videodev              103860  2 uvcvideo,videobuf2_core
coretemp                6102  0 
kvm_intel             123597  0 
media                  10309  2 uvcvideo,videodev
kvm                   389081  1 kvm_intel
i2400m_usb             35666  0 
arc4                    2000  2 
i2400m                117397  1 i2400m_usb
wimax                  26066  1 i2400m
i915                  549333  10 
atl1c                  36398  0 
snd_hda_codec_hdmi     27857  1 
psmouse                76297  0 
drm_kms_helper         35090  1 i915
iwldvm                171017  0 
mac80211              463393  1 iwldvm
crc32c_intel           14249  0 
snd_hda_codec_realtek    62279  1 
dell_wmi                1485  0 
sparse_keymap           3114  1 dell_wmi
dell_laptop             8851  0 
snd_hda_intel          33946  3 
iTCO_wdt                5407  0 
iwlwifi               135485  1 iwldvm
iTCO_vendor_support     1929  1 iTCO_wdt
dcdbas                  6455  1 dell_laptop
cfg80211              430289  3 iwlwifi,mac80211,iwldvm
drm                   223795  6 i915,drm_kms_helper
evdev                   9912  11 
pcspkr                  2027  0 
serio_raw               5041  0 
wmi                     8379  1 dell_wmi
snd_hda_codec         101474  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep               6364  1 snd_hda_codec
snd_pcm                76892  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc          7298  2 snd_pcm,snd_hda_intel
snd_timer              18687  1 snd_pcm
acpi_cpufreq           10470  1 
microcode              14196  0 
rfkill                 15633  4 cfg80211,wimax
mperf                   1267  1 acpi_cpufreq
intel_agp              10936  1 i915
video                  11170  1 i915
i2c_algo_bit            5391  1 i915
ac                      2568  0 
snd                    58893  13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
processor              27239  1 acpi_cpufreq
battery                 7002  0 
intel_gtt              12680  3 i915,intel_agp
i2c_i801               11109  0 
button                  4701  1 i915
i2c_core               22774  6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
intel_ips              12801  0 
soundcore               5418  1 snd
mei                    58789  0 
lpc_ich                11569  0 
ext4                  471524  2 
crc16                   1359  1 ext4
jbd2                   77224  1 ext4
mbcache                 5930  1 ext4
ums_realtek             7327  0 
usb_storage            47063  1 ums_realtek
sd_mod                 30818  4 
ahci                   22096  3 
libahci                20503  1 ahci
libata                168037  2 ahci,libahci
ehci_pci                4120  0 
ehci_hcd               47407  1 ehci_pci
scsi_mod              129231  3 usb_storage,libata,sd_mod
usbcore               173007  6 uvcvideo,ums_realtek,usb_storage,i2400m_usb,ehci_hcd,ehci_pci
usb_common               954  1 usbcore
>

lspci code:

<00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 [Kilmer Peak] (rev 5e)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
>

lsusb code:

<
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
Bus 001 Device 004: ID 174f:143b Syntek 
Bus 002 Device 003: ID 8086:0188 Intel Corp. WiMAX Connection 2400m
>

Here is psmouse code:

<
[    8.947384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 654840
[    9.012723] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11

[    8.947384] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400, board id: 3655, fw id: 654840
>

Proc Devices code:

<
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input0
U: Uniq=
H: Handlers=kbd event0 
B: PROP=0
B: EV=120013
B: KEY=1100f02902002 8380307cf910f001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
U: Uniq=
H: Handlers=event1 
B: PROP=0
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
U: Uniq=
H: Handlers=kbd event2 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event4 
B: PROP=0
B: EV=40001
B: SND=6

I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Dell WMI hotkeys"
P: Phys=wmi/input0
S: Sysfs=/devices/virtual/input/input5
U: Uniq=
H: Handlers=kbd rfkill event5 
B: PROP=0
B: EV=13
B: KEY=1500b00000000 200300000 0 0
B: MSC=10

I: Bus=0001 Vendor=10ec Product=0269 Version=0001
N: Name="HDA Digital PCBeep"
P: Phys=card0/codec#0/beep0
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/input/input6
U: Uniq=
H: Handlers=kbd event6 
B: PROP=0
B: EV=40001
B: SND=6

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel MID HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
U: Uniq=
H: Handlers=event7 
B: PROP=0
B: EV=21
B: SW=140

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel MID Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
U: Uniq=
H: Handlers=event8 
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel MID Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event9 
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0003 Vendor=174f Product=143b Version=b221
N: Name="Integrated Webcam"
P: Phys=usb-0000:00:1a.0-1.4/button
S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
U: Uniq=
H: Handlers=kbd event10 
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0011 Vendor=0002 Product=0007 Version=01b1
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input11
U: Uniq=
H: Handlers=mouse0 event11 
B: PROP=9
B: EV=b
B: KEY=6420 30000 0 0 0 0
B: ABS=260800011000003

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
U: Uniq=
H: Handlers=kbd event12 
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0
>

`

Last edited by jjshinobi (2013-05-01 00:50:13)

Offline

#4 2013-04-30 23:09:14

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,412

Re: [Solved] 50-synaptics editing and touchpad does not work

This is really not okay to do.  At the very least, use code tags.

Offline

#5 2013-04-30 23:39:58

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

WonderWoofy wrote:

This is really not okay to do.  At the very least, use code tags.

I can't click the code bubble to pop up the symbol to convert it.

On a side note, I have downloaded and installed dkms to install psmouse-alps-1.3-alt.tbz that was mentioned in another thread. It does not do anything when I run sudo dkms autoinstall psmouse-alps-1.3-alt

Offline

#6 2013-04-30 23:54:46

WonderWoofy
Member
From: Los Gatos, CA
Registered: 2012-05-19
Posts: 8,412

Re: [Solved] 50-synaptics editing and touchpad does not work

You don't need to click anything you just use code tags around the stuff you want in the box.  They are like this [ code ] <journal stuff here> [ /code ].  But remove the spaces between teh square brackets and the code and /code parts.

I guess you can't really do that now since you can't click on anything.  I'll report it for you and have it fixed.

Offline

#7 2013-05-01 00:04:04

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

WonderWoofy wrote:

You don't need to click anything you just use code tags around the stuff you want in the box.  They are like this [ code ] <journal stuff here> [ /code ].  But remove the spaces between teh square brackets and the code and /code parts.

I guess you can't really do that now since you can't click on anything.  I'll report it for you and have it fixed.

Done :-). Closest forum with my issue after countless Internet search: https://bbs.archlinux.org/viewtopic.php?pid=1231572

Offline

#8 2013-05-01 00:40:17

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 5,675

Re: [Solved] 50-synaptics editing and touchpad does not work

Do you have /etc/X11/xorg.conf.d/10-evdev.conf?

[Note: evdev not endev.]

Incidentally, I don't see how a game can have overwritten system configuration unless it was running as root or something. Have you tried creating a fresh user account and logging into that?

Last edited by cfr (2013-05-01 00:41:20)


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | grub2 | systemd | LVM2 on LUKS
Lenovo x121e | Intel(R) Core(TM) i3-2367M CPU @ 1.40GHz GenuineIntel | Intel Centrino Wireless-N 1000 | US keyboard with Euro | 320G 7200 RPM Seagate HDD

Offline

#9 2013-05-01 00:45:36

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

Yes, they all uses events instead of mouse. I did not change anything:

 #
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Edit: The mouse is frozen at login screen, but I'll create one and see if it works.

Last edited by jjshinobi (2013-05-01 00:52:50)

Offline

#10 2013-05-01 04:00:09

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

Did the following:

sudo mv psmouse-alps-1.3-alt.tbz /
cd /
sudo tar -xjf psmouse-alps-1.3alt.tbz
cd user
cd src
sudo dkms add psmouse/alps-1.3
sudo dkms install psmouse/alps-1.3

Restarted, uninstalled it, and Arceus told me there isn't an original module for this and the toggle to change the touchpad still doesn't work so maybe I don't have an alps driver. I thought that didn't matter since it still reverse engineering Dell's synaptic driver and other Dell Inspiron people reported it worked. I also couldn't

sudo rm psmouse-alps-1.3

. It tells me "cannot remove 'psmouse-alps-1.3': Is a directory".

Logging into another user did not reactivate the mouse. Only when I go to debian rescue mode and most likely other live CDs like Ubuntu.

Is there a way I can manually hit activate the touchpad? Like I said, pressing the button shows that it works but it shows the touchpad with an x, no matter how many times I press it.

Offline

#11 2013-05-01 04:09:42

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

I just disabled testing and community testing and when I did an Syu that:
bash-completion is at 2.1-2 compared to 2.1-1
dbus 1.6.10-1 | 1.6.8.6
dhcpcd 5.6.8-1 | 5.6.7-1
gcc 4.8.0-3 | 4.8.0-2
libdlap 2.4.35-2 | 2.4.35-1
libpipeline 1.2..3-1 | 1.2.2-1
libpulse 3.99.1-1 | 3.0-3
linux 3.9.2 | 3.8.10-1
linux-firmware 20130430-1 | 20121118-1
linux-headers 3.9.2 | 3.8.10-1
pciutils 3.2.0-2 | 3.1.10-1
pulseaudio 3.99.101 | 3.0-3
util-linux 2.23-1 | 2.22.2-2
zlib 1.2.8-1 | 1.2.7-1
And of course Gnome 3.8.

I'm looking for a way to bulk degrade these. I think this is the problem, the kernel right now is too advanced for the touchpad drivers.

Offline

#12 2013-05-01 04:12:17

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 20,105
Website

Re: [Solved] 50-synaptics editing and touchpad does not work

-Suu to downgrade from [testing]


Arch + dwm   •   Mercurial repos  •   Github

Registered Linux User #482438

Offline

#13 2013-05-01 04:27:41

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

Well, downgrading and a restart didn't work. I'll just double check the synaptics wiki. What the hell could it be?

Offline

#14 2013-05-02 07:42:26

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

I'll be honest this is the same Dell / kernel related bug that happened to me before installing Windows 8 when it first came out. How do I copy the result of

sudo pacman -Qs

and

sudo pacman -Qm

into a text file. I just plan to learn how to use larch, archiso, or archboot to create a custom ISO with what I had rather than tackling this bug.

Offline

#15 2013-05-02 17:18:25

oboenerd
Member
From: Right behind you.
Registered: 2012-08-15
Posts: 52

Re: [Solved] 50-synaptics editing and touchpad does not work

Can I see your synaptics.conf file?  On my first look, these two lines of your xorg log set red flags for me:

[    18.282] (II) No input driver specified, ignoring this device.
[    18.282] (II) This device may have been added with another device file.

Also, which kind of touchpad do you have?  I'm curious as to which symptoms you're facing.  Can you move the mouse?  If there's a physical button, does it send a click event?


"I quoted myself." -oboenerd

Offline

#16 2013-05-02 17:24:12

oboenerd
Member
From: Right behind you.
Registered: 2012-08-15
Posts: 52

Re: [Solved] 50-synaptics editing and touchpad does not work

jjshinobi wrote:

I'll be honest this is the same Dell / kernel related bug that happened to me before installing Windows 8 when it first came out. How do I copy the result of

sudo pacman -Qs

and

sudo pacman -Qm

into a text file. I just plan to learn how to use larch, archiso, or archboot to create a custom ISO with what I had rather than tackling this bug.

To redirect the output of a program into a file, do this, for example:

$ pacman -Qs > output_file

This will overwrite output_file.  If you want to append and not overwrite, use >>

See http://www.tldp.org/LDP/abs/html/io-redirection.html .

However, I don't think this will be necessary - let's only do this as an absolute last resort.

Last edited by oboenerd (2013-05-02 17:25:10)


"I quoted myself." -oboenerd

Offline

#17 2013-05-02 17:26:37

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

What I ended up doing last night was checking if in Android x86 my mouse worked, it did- installed Ubuntu 13.04 over it, also confirmed that the mouse works. So in Debian, Ubuntu, Android the touchpad works except in Arch. I'm jayvansantos answering over this thread: http://en.community.dell.com/support-fo … 78426.aspx so I'm certain it's this same bug.

I believe it's Synaptics_v16_2_21. I don't have a mouse, I have a touchpad, the cursor doesn't even show up. I touch the activater (F6), the click event works but only pops up with an x (like it can never activate).

Edit: One moment while I reboot.

Last edited by jjshinobi (2013-05-02 17:28:45)

Offline

#18 2013-05-02 17:31:00

oboenerd
Member
From: Right behind you.
Registered: 2012-08-15
Posts: 52

Re: [Solved] 50-synaptics editing and touchpad does not work

Ok.  Can I see your 50-synaptics.conf?


"I quoted myself." -oboenerd

Offline

#19 2013-05-02 17:39:03

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

Running:

cat /etc/X11/xorg.conf.d/50-synaptics.conf >~50synaptics.log

Returns:

# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
#   Option "OptionName" "value"
#
Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
        Option "TapButton1" "1"
        Option "TapButton2" "2"
        Option "TapButton3" "3"
	Option "VertEdgeScroll" "on"
	Option "VertTwoFingerScroll" "on"
	Option "HorizEdgeScroll" "on"
	Option "HorizTwoFingerScroll" "on"
	Option "CircularScrolling" "on"
	Option "CircScrollTrigger" "2"
	Option "EmulateTwoFingerMinZ" "40"
	Option "EmulateTwoFingerMinW" "8"
	Option "CoastingSpeed" "0"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
        MatchDevicePath "/dev/input/event*"
EndSection

Section "InputClass"
        Identifier "touchpad ignore duplicates"
        MatchIsTouchpad "on"
        MatchOS "Linux"
        MatchDevicePath "/dev/input/event*"
        Option "Ignore" "on"
EndSection

# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Default clickpad buttons"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
#       To disable the bottom edge area so the buttons only work as buttons,
#       not for movement, set the AreaBottomEdge
#       Option "AreaBottomEdge" "82%"
EndSection

# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Disable clickpad buttons on Apple touchpads"
        MatchProduct "Apple|bcm5974"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection

Last edited by jjshinobi (2013-05-02 17:40:53)

Offline

#20 2013-05-02 17:52:03

oboenerd
Member
From: Right behind you.
Registered: 2012-08-15
Posts: 52

Re: [Solved] 50-synaptics editing and touchpad does not work

It's clear that the kernel is recognizing the touchpad properly - and X acknowledges the presence of the device but then goes on to ignore it

This section seems fishy to me:

Section "InputClass"
        Identifier "touchpad ignore duplicates"
        MatchIsTouchpad "on"
        MatchOS "Linux"
        MatchDevicePath "/dev/input/event*"
        Option "Ignore" "on"
EndSection

Can you delete/comment it out and report back?


"I quoted myself." -oboenerd

Offline

#21 2013-05-02 18:02:10

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

I don't think it matters, but here's what it looks like when I press the Touchpad activator. JfmKm8r.jpeg

My synaptics.conf now reads:

# Example xorg.conf.d snippet that assigns the touchpad driver
# to all touchpads. See xorg.conf.d(5) for more information on
# InputClass.
# DO NOT EDIT THIS FILE, your distribution will likely overwrite
# it when updating. Copy (and rename) this file into
# /etc/X11/xorg.conf.d first.
# Additional options may be added in the form of
#   Option "OptionName" "value"
#
Section "InputClass"
        Identifier "touchpad catchall"
        Driver "synaptics"
        MatchIsTouchpad "on"
        Option "TapButton1" "1"
        Option "TapButton2" "2"
        Option "TapButton3" "3"
	Option "VertEdgeScroll" "on"
	Option "VertTwoFingerScroll" "on"
	Option "HorizEdgeScroll" "on"
	Option "HorizTwoFingerScroll" "on"
	Option "CircularScrolling" "on"
	Option "CircScrollTrigger" "2"
	Option "EmulateTwoFingerMinZ" "40"
	Option "EmulateTwoFingerMinW" "8"
	Option "CoastingSpeed" "0"
# This option is recommend on all Linux systems using evdev, but cannot be
# enabled by default. See the following link for details:
# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
        MatchDevicePath "/dev/input/event*"
EndSection

#Section "InputClass"
#        Identifier "touchpad ignore duplicates"
#        MatchIsTouchpad "on"
#        MatchOS "Linux"
#        MatchDevicePath "/dev/input/event*"
#        Option "Ignore" "on"
#EndSection

# This option enables the bottom right corner to be a right button on
# non-synaptics clickpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Default clickpad buttons"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
#       To disable the bottom edge area so the buttons only work as buttons,
#       not for movement, set the AreaBottomEdge
#       Option "AreaBottomEdge" "82%"
EndSection

# This option disables software buttons on Apple touchpads.
# This option is only interpreted by clickpads.
Section "InputClass"
        Identifier "Disable clickpad buttons on Apple touchpads"
        MatchProduct "Apple|bcm5974"
        MatchDriver "synaptics"
        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
EndSection

Last edited by jjshinobi (2013-05-02 18:14:31)

Offline

#22 2013-05-02 18:12:19

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

(Y) It works! Thank you! r68lriB.jpegB

Last edited by jjshinobi (2013-05-02 18:13:29)

Offline

#23 2013-05-03 00:29:24

oboenerd
Member
From: Right behind you.
Registered: 2012-08-15
Posts: 52

Re: [Solved] 50-synaptics editing and touchpad does not work

Awesome! Just curious... Did you originally copy your synaptics.conf from another os?


"I quoted myself." -oboenerd

Offline

#24 2013-05-03 02:11:41

jjshinobi
Member
Registered: 2013-04-06
Posts: 97

Re: [Solved] 50-synaptics editing and touchpad does not work

No. I did a full system upgrade with community testing and testing enabled that updated other kernel. Upon launching Amnesia it froze and I had to reboot. Then I followed the Instructions in the Synaptics wiki and manually copied the default settings. I only copied the options settings and did not add what I commented out. I thought that was normal so I left it there

Offline

#25 2013-05-03 20:45:53

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 5,675

Re: [Solved] 50-synaptics editing and touchpad does not work

I have that stanza in my copy of the file as well and until a few hours ago mine was entirely default. My touchpad has worked fine with it, mind. But I think it must be part of the default file installed by Arch.


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | grub2 | systemd | LVM2 on LUKS
Lenovo x121e | Intel(R) Core(TM) i3-2367M CPU @ 1.40GHz GenuineIntel | Intel Centrino Wireless-N 1000 | US keyboard with Euro | 320G 7200 RPM Seagate HDD

Offline

Board footer

Powered by FluxBB