You are not logged in.

#1 2013-04-23 15:25:49

Kotrfa
Member
Registered: 2012-10-25
Posts: 146

Sound stopped working

Hi.

It used to work.

I have problem with sound. Yesterday It does work, but today it stopped working. I'm not sure if it is because of some updates, I haven't noticed anything connected to sound. The only difference is that I uninstalled mplayer2. Then it stopped working - but I'm not sure if it was because of this.

I tried:
reinstall alsa, alsa-plugins, alsa-utils, vlc, mplayer2
install pulseaudio, oss (without configuration)
reboot
unmute all chanels in alsamixer
connecting headphones

aplay -L

null
    Discard all samples (playback) or generate zero samples (capture)
pulse
    PulseAudio Sound Server
default:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
sysdefault:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Front speakers
surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output

aplay -l

**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

lspci|grep -i audio

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)

lsmod|grep '^snd'|column -t

snd_hda_codec_hdmi     27857   1
snd_hda_codec_realtek  62279   1
snd_hda_intel          33946   0
snd_hda_codec          101474  3  snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep              6364    1  snd_hda_codec
snd_pcm                76956   3  snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc         7298    2  snd_pcm,snd_hda_intel
snd_timer              18687   1  snd_pcm
snd                    58893   7  snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel

pacman -Q |egrep -wi --color 'vlc|audio|alsa|mplayer2|oss|pulse|sound'

alsa-lib 1.0.27-1
alsa-plug]alsa-lib 1.0.27-1
alsa-plugins 1.0.27-1
alsa-utils 1.0.27-4
lib32-alsa-lib 1.0.27-1ins 1.0.27-1
alsa-utils 1.0.27-4
lib32-alsa-lib 1.0.27-1

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 06XK 03/16/2012
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x19fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0C0000000 mask FE0000000 write-back
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F80000000 write-back
[    0.000000]   6 base 180000000 mask FE0000000 write-back
[    0.000000]   7 base 19FE00000 mask FFFE00000 uncachable
[    0.000000]   8 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
[    0.000000]  [mem 0x00000000-0xdaffffff] page 2M
[    0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x19fdfffff]
[    0.000000]  [mem 0x100000000-0x19fdfffff] page 2M
[    0.000000] kernel direct mapping tables up to 0x19fdfffff @ [mem 0xd9c9b000-0xd9c9efff]
[    0.000000] RAMDISK: [mem 0x37a50000-0x37d1ffff]
[    0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
[    0.000000] ACPI: XSDT 00000000daffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000daff2000 0803C (v02 SECCSD  SNB-CPT 00000000 INTL 20061109)
[    0.000000] ACPI: FACS 00000000daf47000 00040
[    0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
[    0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000dafea000 00996 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 00000000dafe7000 0022E (v01 SECCSD LH43STAR 00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x19fdfffff]
[    0.000000]   NODE_DATA [mem 0x19fdfb000-0x19fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199400000-ffff88019f3fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x19fdfffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xd9c9efff]
[    0.000000]   node   0: [mem 0xdafff000-0xdaffffff]
[    0.000000]   node   0: [mem 0x100000000-0x19fdfffff]
[    0.000000] On node 0 totalpages: 1545773
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 141 pages reserved
[    0.000000]   DMA zone: 3776 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13859 pages used for memmap
[    0.000000]   DMA32 zone: 873085 pages, LIFO batch:31
[    0.000000]   Normal zone: 10232 pages used for memmap
[    0.000000]   Normal zone: 644616 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
[    0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
[    0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[    0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fa00000 s85184 r8192 d21312 u262144
[    0.000000] pcpu-alloc: s85184 r8192 d21312 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1521477
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6002944k/6813696k available (4908k kernel code, 630604k absent, 180148k reserved, 4024k data, 820k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 1596.383 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.79 BogoMIPS (lpj=5321276)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000038] Security Framework initialized
[    0.000045] AppArmor: AppArmor disabled by boot time parameter
[    0.000630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002565] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003415] Mount-cache hash table entries: 256
[    0.003607] Initializing cgroup subsys cpuacct
[    0.003609] Initializing cgroup subsys memory
[    0.003616] Initializing cgroup subsys devices
[    0.003618] Initializing cgroup subsys freezer
[    0.003620] Initializing cgroup subsys net_cls
[    0.003622] Initializing cgroup subsys blkio
[    0.003647] Disabled fast string operations
[    0.003649] CPU: Physical Processor ID: 0
[    0.003650] CPU: Processor Core ID: 0
[    0.003655] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003658] mce: CPU supports 7 MCE banks
[    0.003671] CPU0: Thermal monitoring enabled (TM1)
[    0.003677] process: using mwait in idle threads
[    0.003681] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[    0.003835] Freeing SMP alternatives: 20k freed
[    0.004849] ACPI: Core revision 20121018
[    0.011331] ftrace: allocating 19310 entries in 76 pages
[    0.022372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055356] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
[    0.055365] TSC deadline timer enabled
[    0.055369] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.055376] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.055378] ... version:                3
[    0.055379] ... bit width:              48
[    0.055380] ... generic registers:      4
[    0.055381] ... value mask:             0000ffffffffffff
[    0.055382] ... max period:             000000007fffffff
[    0.055383] ... fixed-purpose events:   3
[    0.055384] ... event mask:             000000070000000f
[    0.093170] Disabled fast string operations
[    0.095374] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.113177] Disabled fast string operations
[    0.126599] Disabled fast string operations
[    0.082145] smpboot: Booting Node   0, Processors  #1 #2 #3
[    0.128712] Brought up 4 CPUs
[    0.128716] smpboot: Total of 4 processors activated (12776.19 BogoMIPS)
[    0.132574] devtmpfs: initialized
[    0.133773] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
[    0.134524] RTC time: 14:38:00, date: 04/23/13
[    0.134565] NET: Registered protocol family 16
[    0.134701] ACPI: bus type pci registered
[    0.134776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.134779] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.142122] PCI: Using configuration type 1 for base access
[    0.142308] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.142309] mtrr: probably your BIOS does not setup all CPUs.
[    0.142310] mtrr: corrected configuration.
[    0.142733] bio: create slab <bio-0> at 0
[    0.142794] ACPI: Added _OSI(Module Device)
[    0.142795] ACPI: Added _OSI(Processor Device)
[    0.142797] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.142798] ACPI: Added _OSI(Processor Aggregator Device)
[    0.144238] ACPI: EC: Look up EC in DSDT
[    0.145725] ACPI: Executed 1 blocks of module-level executable AML code
[    0.148149] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.149385] ACPI: SSDT 00000000dae70718 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.149747] ACPI: Dynamic OEM Table Load:
[    0.149750] ACPI: SSDT           (null) 00688 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.150021] ACPI: SSDT 00000000dae71a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.150411] ACPI: Dynamic OEM Table Load:
[    0.150414] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.150533] ACPI: SSDT 00000000dae6fd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.150890] ACPI: Dynamic OEM Table Load:
[    0.150892] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.152416] ACPI: Interpreter enabled
[    0.152421] ACPI: (supports S0 S1 S3 S4 S5)
[    0.152442] ACPI: Using IOAPIC for interrupt routing
[    0.159354] ACPI: Power Resource [FN00] (off)
[    0.159432] ACPI: Power Resource [FN01] (off)
[    0.159506] ACPI: Power Resource [FN02] (off)
[    0.159581] ACPI: Power Resource [FN03] (off)
[    0.159654] ACPI: Power Resource [FN04] (off)
[    0.159950] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.160074] ACPI: No dock devices found.
[    0.160078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.160290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.160292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.160531] \_SB_.PCI0:_OSC invalid UUID
[    0.160532] _OSC request data:1 8 1f 
[    0.160943] PCI host bridge to bus 0000:00
[    0.160946] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.160949] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.160951] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.160952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.160954] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
[    0.160956] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[    0.160965] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.161009] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.161021] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.161028] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.161033] pci 0000:00:02.0: reg 20: [io  0x3000-0x303f]
[    0.161093] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.161118] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
[    0.161201] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.161240] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.161264] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
[    0.161361] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.161391] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.161408] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
[    0.161483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.161509] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.161596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.161628] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.161714] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.161746] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.161876] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.161921] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.161945] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
[    0.162042] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.162072] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[    0.162207] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.162228] pci 0000:00:1f.2: reg 10: [io  0x3088-0x308f]
[    0.162236] pci 0000:00:1f.2: reg 14: [io  0x3094-0x3097]
[    0.162245] pci 0000:00:1f.2: reg 18: [io  0x3080-0x3087]
[    0.162254] pci 0000:00:1f.2: reg 1c: [io  0x3090-0x3093]
[    0.162263] pci 0000:00:1f.2: reg 20: [io  0x3060-0x307f]
[    0.162272] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
[    0.162324] pci 0000:00:1f.2: PME# supported from D3hot
[    0.162346] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.162363] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
[    0.162392] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.162635] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
[    0.162815] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
[    0.163511] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.169202] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.169209] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.169339] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.169408] pci 0000:02:00.0: reg 10: [io  0x2000-0x20ff]
[    0.169530] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
[    0.169605] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
[    0.169935] pci 0000:02:00.0: supports D1 D2
[    0.169937] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.175788] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.175797] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.175816] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.175957] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.175995] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
[    0.176190] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.182448] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.182462] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.182529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.182568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.182598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.182726] \_SB_.PCI0:_OSC invalid UUID
[    0.182727] _OSC request data:1 1f 1f 
[    0.182731]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.182732]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.183395] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.183442] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.183487] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.183530] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.183573] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.183616] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.183662] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.183709] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
[    0.183797] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.183801] vgaarb: loaded
[    0.183802] vgaarb: bridge control possible 0000:00:02.0
[    0.183834] PCI: Using ACPI for IRQ routing
[    0.185498] PCI: pci_cache_line_size set to 64 bytes
[    0.185611] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.185613] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
[    0.185615] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.185616] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff]
[    0.185709] NetLabel: Initializing
[    0.185711] NetLabel:  domain hash size = 128
[    0.185712] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.185729] NetLabel:  unlabeled traffic allowed by default
[    0.185745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.185750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.187760] Switching to clocksource hpet
[    0.192350] pnp: PnP ACPI init
[    0.192366] ACPI: bus type pnp registered
[    0.192633] pnp 00:00: [dma 4]
[    0.192731] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.192753] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.192844] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.192878] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.192924] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.192927] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.192929] system 00:04: [io  0x5000-0x5003] has been reserved
[    0.192931] system 00:04: [io  0xffff] has been reserved
[    0.192932] system 00:04: [io  0x0400-0x0453] has been reserved
[    0.192938] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.192940] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.192942] system 00:04: [io  0x0a00-0x0a0f] has been reserved
[    0.192944] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.192946] system 00:04: [io  0x5000-0x500f] could not be reserved
[    0.192949] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.192975] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.193023] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.193027] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.193068] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.193112] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
[    0.193267] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.193270] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.193272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.193274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.193276] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.193278] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.193280] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.193282] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.193284] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    0.193286] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.193288] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.193629] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20121018/utresrc-650)
[    0.193634] pnp 00:0a: can't evaluate _CRS: 12311
[    0.193738] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.193762] pnp: PnP ACPI: found 11 devices
[    0.193764] ACPI: ACPI bus type pnp unregistered
[    0.200460] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.200467] pci 0000:00:1c.0:   bridge window [mem 0xf0600000-0xf06fffff]
[    0.200477] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.200481] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.200489] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.200497] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.200503] pci 0000:00:1c.4:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.200541] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.200543] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.200545] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.200546] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.200548] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    0.200550] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
[    0.200552] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.200554] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[    0.200556] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.200587] NET: Registered protocol family 2
[    0.200783] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.201021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.201188] TCP: Hash tables configured (established 65536 bind 65536)
[    0.201218] TCP: reno registered
[    0.201232] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.201269] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.201357] NET: Registered protocol family 1
[    0.201372] pci 0000:00:02.0: Boot video device
[    0.201548] PCI: CLS 64 bytes, default 64
[    0.201591] Unpacking initramfs...
[    0.261406] Freeing initrd memory: 2880k freed
[    0.261899] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.261905] software IO TLB [mem 0xd5c9b000-0xd9c9b000] (64MB) mapped at [ffff8800d5c9b000-ffff8800d9c9afff]
[    0.262304] audit: initializing netlink socket (disabled)
[    0.262319] type=2000 audit(1366727880.259:1): initialized
[    0.276840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.278407] VFS: Disk quotas dquot_6.5.2
[    0.278450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.278614] msgmni has been set to 11730
[    0.278836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.278888] io scheduler noop registered
[    0.278891] io scheduler deadline registered
[    0.278897] io scheduler cfq registered (default)
[    0.279146] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.279147] vesafb: scrolling: redraw
[    0.279149] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.279531] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
[    0.344149] Console: switching to colour frame buffer device 128x48
[    0.408701] fb0: VESA VGA frame buffer device
[    0.408712] intel_idle: MWAIT substates: 0x21120
[    0.408714] intel_idle: v0.4 model 0x2A
[    0.408715] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.408750] GHES: HEST is not enabled!
[    0.408800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.409237] Linux agpgart interface v0.103
[    0.409304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
[    0.416404] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.416417] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.416540] mousedev: PS/2 mouse device common for all mice
[    0.416900] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.416930] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.417022] cpuidle: using governor ladder
[    0.417127] cpuidle: using governor menu
[    0.417129] EFI Variables Facility v0.08 2004-May-17
[    0.417180] drop_monitor: Initializing network drop monitor service
[    0.417252] TCP: cubic registered
[    0.417348] NET: Registered protocol family 10
[    0.417495] NET: Registered protocol family 17
[    0.417505] Key type dns_resolver registered
[    0.417796] PM: Hibernation image not present or could not be loaded.
[    0.417805] registered taskstats version 1
[    0.418395]   Magic number: 9:780:637
[    0.418468] rtc_cmos 00:05: setting system clock to 2013-04-23 14:38:01 UTC (1366727881)
[    0.420125] Freeing unused kernel memory: 820k freed
[    0.420254] Write protecting the kernel read-only data: 8192k
[    0.423156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.424428] Freeing unused kernel memory: 1224k freed
[    0.425960] Freeing unused kernel memory: 440k freed
[    0.433142] systemd-udevd[57]: starting version 201
[    0.458283] ACPI: bus type usb registered
[    0.458349] usbcore: registered new interface driver usbfs
[    0.458370] usbcore: registered new interface driver hub
[    0.458506] usbcore: registered new device driver usb
[    0.458848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.458984] ehci-pci: EHCI PCI platform driver
[    0.459037] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    0.459041] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.459047] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.459062] ehci-pci 0000:00:1a.0: debug port 2
[    0.462962] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.462983] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
[    0.463303] SCSI subsystem initialized
[    0.464366] ACPI: bus type scsi registered
[    0.464443] libata version 3.00 loaded.
[    0.464501] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.464512] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.470946] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.471264] hub 1-0:1.0: USB hub found
[    0.471272] hub 1-0:1.0: 2 ports detected
[    0.471541] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    0.471545] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.471551] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.471576] ehci-pci 0000:00:1d.0: debug port 2
[    0.475501] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.475524] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
[    0.484257] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.484616] hub 3-0:1.0: USB hub found
[    0.484625] hub 3-0:1.0: 2 ports detected
[    0.484916] ahci 0000:00:1f.2: version 3.0
[    0.485018] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    0.485078] ahci: SSS flag set, parallel bus scan disabled
[    0.485142] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
[    0.485145] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst 
[    0.485152] ahci 0000:00:1f.2: setting latency timer to 64
[    0.498266] scsi0 : ahci
[    0.498400] scsi1 : ahci
[    0.498501] scsi2 : ahci
[    0.498607] scsi3 : ahci
[    0.498716] scsi4 : ahci
[    0.498823] scsi5 : ahci
[    0.498879] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
[    0.498883] ata2: DUMMY
[    0.498885] ata3: DUMMY
[    0.498888] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
[    0.498891] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
[    0.498893] ata6: DUMMY
[    0.527671] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
[    0.527678] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
[    0.527683] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[    0.527688] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[    0.527693] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[    0.527949] xHCI xhci_add_endpoint called for root hub
[    0.527951] xHCI xhci_check_bandwidth called for root hub
[    0.527980] hub 2-0:1.0: USB hub found
[    0.527988] hub 2-0:1.0: 2 ports detected
[    0.528084] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.528088] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.528278] xHCI xhci_add_endpoint called for root hub
[    0.528282] xHCI xhci_check_bandwidth called for root hub
[    0.528325] hub 4-0:1.0: USB hub found
[    0.528336] hub 4-0:1.0: 2 ports detected
[    0.777504] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.817457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.818156] ata1.00: ATA-9: SAMSUNG MZ7PC128HAFU-000, CXM02K1Q, max UDMA/133
[    0.818173] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.818687] ata1.00: configured for UDMA/133
[    0.818930] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZ7PC128 CXM0 PQ: 0 ANSI: 5
[    0.901417] hub 1-1:1.0: USB hub found
[    0.901487] hub 1-1:1.0: 6 ports detected
[    1.007327] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.131530] hub 3-1:1.0: USB hub found
[    1.131707] hub 3-1:1.0: 6 ports detected
[    1.137166] ata4: SATA link down (SStatus 0 SControl 300)
[    1.210698] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[    1.263792] tsc: Refined TSC clocksource calibration: 1596.373 MHz
[    1.263808] Switching to clocksource tsc
[    1.456959] ata5: SATA link down (SStatus 0 SControl 300)
[    1.460046] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    1.460135] sd 0:0:0:0: [sda] Write Protect is off
[    1.460139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.460170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.461145]  sda: sda1 sda2 sda3 sda4 < sda5 >
[    1.461569] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.668989] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.706891] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
[    1.790244] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    1.791051] systemd[1]: Set hostname to <530uarch>.
[    1.859141] systemd[1]: Cannot add dependency job for unit ntpd.service, ignoring: Unit ntpd.service failed to load: No such file or directory. See system logs and 'systemctl status ntpd.service' for details.
[    1.859155] systemd[1]: Cannot add dependency job for unit laptop-mode.service, ignoring: Unit laptop-mode.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode.service' for details.
[    1.859170] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[    1.859349] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    1.859395] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.859406] systemd[1]: Starting Remote File Systems.
[    1.859417] systemd[1]: Reached target Remote File Systems.
[    1.859425] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
[    1.859434] systemd[1]: Starting Delayed Shutdown Socket.
[    1.859461] systemd[1]: Listening on Delayed Shutdown Socket.
[    1.859468] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    1.859487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.859494] systemd[1]: Starting LVM2 metadata daemon socket.
[    1.859516] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.859524] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    1.859547] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.859558] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    1.859587] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.859595] systemd[1]: Starting Paths.
[    1.859603] systemd[1]: Reached target Paths.
[    1.859626] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    1.859714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.859722] systemd[1]: Starting Encrypted Volumes.
[    1.859731] systemd[1]: Reached target Encrypted Volumes.
[    1.859784] systemd[1]: Starting udev Kernel Socket.
[    1.859803] systemd[1]: Listening on udev Kernel Socket.
[    1.859845] systemd[1]: Starting udev Control Socket.
[    1.859868] systemd[1]: Listening on udev Control Socket.
[    1.859877] systemd[1]: Starting Journal Socket.
[    1.859912] systemd[1]: Listening on Journal Socket.
[    1.859945] systemd[1]: Mounting Huge Pages File System...
[    1.893494] systemd[1]: Mounting POSIX Message Queue File System...
[    1.898344] systemd[1]: Started Load Kernel Modules.
[    1.898365] systemd[1]: Mounted FUSE Control File System.
[    1.899753] systemd[1]: Starting Apply Kernel Variables...
[    1.923663] systemd[1]: Mounting Configuration File System...
[    1.930086] systemd[1]: Starting udev Coldplug all Devices...
[    1.936854] systemd[1]: Starting Journal Service...
[    1.950121] systemd[1]: Started Journal Service.
[    1.950178] systemd[1]: Starting Setup Virtual Console...
[    1.960089] systemd[1]: Starting Create static device nodes in /dev...
[    1.967386] systemd[1]: Started Set Up Additional Binary Formats.
[    1.967414] systemd[1]: Mounting Debug File System...
[    1.976595] systemd[1]: Starting Swap.
[    1.976618] systemd[1]: Reached target Swap.
[    1.976647] systemd[1]: Mounting Temporary Directory...
[    2.023332] systemd[1]: Started File System Check on Root Device.
[    2.023347] systemd[1]: Starting Remount Root and Kernel File Systems...
[    2.060070] systemd[1]: Expecting device dev-disk-by\x2duuid-1166c42d\x2dd01a\x2d40bf\x2d8926\x2d2795b3f0b834.device...
[    2.060097] systemd[1]: Expecting device dev-disk-by\x2duuid-C332\x2d535C.device...
[    2.060597] systemd[1]: Mounted Huge Pages File System.
[    2.060732] systemd[1]: Mounted POSIX Message Queue File System.
[    2.062885] EXT4-fs (sda1): re-mounted. Opts: commit=15,data=ordered,discard
[    2.079953] systemd[1]: Started Apply Kernel Variables.
[    2.080081] systemd[1]: Mounted Configuration File System.
[    2.091845] systemd[1]: Started Setup Virtual Console.
[    2.093312] systemd[1]: Started Create static device nodes in /dev.
[    2.093419] systemd[1]: Mounted Debug File System.
[    2.093493] systemd[1]: Mounted Temporary Directory.
[    2.093753] systemd[1]: Started Remount Root and Kernel File Systems.
[    2.106639] systemd[1]: Started udev Coldplug all Devices.
[    2.106691] systemd[1]: Starting Load Random Seed...
[    2.113536] systemd[1]: Starting udev Kernel Device Manager...
[    2.119903] systemd[1]: Started Load Random Seed.
[    2.122479] systemd-udevd[142]: starting version 202
[    2.126885] systemd[1]: Started udev Kernel Device Manager.
[    2.126941] systemd[1]: Starting Local File Systems (Pre).
[    2.126955] systemd[1]: Reached target Local File Systems (Pre).
[    2.182697] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
[    2.182707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.182713] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    2.182718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.182720] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    2.182724] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.182726] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
[    2.182731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.182733] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.183607] ACPI: AC Adapter [ADP1] (on-line)
[    2.184967] ACPI: Requesting acpi_cpufreq
[    2.187346] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.187393] ACPI: Lid Switch [LID0]
[    2.187480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.187487] ACPI: Power Button [PWRB]
[    2.190425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.190433] ACPI: Power Button [PWRF]
[    2.191578] mei 0000:00:16.0: setting latency timer to 64
[    2.191674] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[    2.198369] [drm] Initialized drm 1.1.0 20060810
[    2.198487] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
[    2.198496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.207287] ACPI: Battery Slot [BAT1] (battery present)
[    2.210635] ACPI: Fan [FAN0] (off)
[    2.210696] ACPI: Fan [FAN1] (off)
[    2.210754] ACPI: Fan [FAN2] (off)
[    2.210806] ACPI: Fan [FAN3] (off)
[    2.210877] ACPI: Fan [FAN4] (off)
[    2.211218] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[    2.213278] thermal LNXTHERM:00: registered as thermal_zone0
[    2.213283] ACPI: Thermal Zone [TZ00] (61 C)
[    2.214137] thermal LNXTHERM:01: registered as thermal_zone1
[    2.214139] ACPI: Thermal Zone [TZ01] (30 C)
[    2.231486] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    2.231742] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[    2.236625] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.236988] r8169 0000:02:00.0: irq 48 for MSI/MSI-X
[    2.237512] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004ef8000, e8:03:9a:97:b5:a7, XID 0c900800 IRQ 48
[    2.237516] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.254854] cfg80211: Calling CRDA to update world regulatory domain
[    2.258073] samsung_laptop: detected SABI interface: SwSmi@
[    2.258077] samsung_laptop: Backlight controlled by ACPI video driver
[    2.271599] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.271604] Copyright(c) 2003-2012 Intel Corporation
[    2.272199] iwlwifi 0000:01:00.0: irq 49 for MSI/MSI-X
[    2.273865] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    2.274238] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    2.274354] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    2.276284] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
[    2.276358] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
[    2.276360] systemd[1]: Starting File System Check on /dev/disk/by-uuid/1166c42d-d01a-40bf-8926-2795b3f0b834...
[    2.277330] [drm] Memory usable by graphics device = 2048M
[    2.277337] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    2.277340] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.277356] Console: switching to colour dummy device 80x25
[    2.277856] i915 0000:00:02.0: setting latency timer to 64
[    2.293728] iTCO_vendor_support: vendor-support=0
[    2.294474] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    2.295948] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    2.296080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.296784] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.296789] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    2.296792] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    2.296794] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[    2.296797] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
[    2.296800] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[    2.297034] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[    2.309676] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
[    2.309725] systemd[1]: Mounting /mnt/shard...
[    2.315045] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[    2.326398] i915 0000:00:02.0: irq 50 for MSI/MSI-X
[    2.326694] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.326697] [drm] Driver supports precise vblank timestamp query.
[    2.326780] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.329470] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.335638] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[    2.339306] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[    2.339922] systemd[1]: Starting Sound Card.
[    2.339944] systemd[1]: Reached target Sound Card.
[    2.344210] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.353017] systemd-udevd[151]: renamed network interface eth0 to enp2s0
[    2.356365] systemd-udevd[152]: renamed network interface wlan0 to wlp1s0
[    2.359280] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    2.403861] fbcon: inteldrmfb (fb0) is primary device
[    2.412172] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: commit=15,data=ordered,discard
[    2.523824] usb 3-1.5: USB disconnect, device number 3
[    2.608485] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[    2.615267] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[    2.885607] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
[    2.900591] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
[    2.975438] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[    3.013202] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[    3.020042] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[    3.252446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    3.415660] Console: switching to colour frame buffer device 170x48
[    3.424244] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.424247] i915 0000:00:02.0: registered panic notifier
[    3.436609] acpi device:32: registered as cooling_device9
[    3.436968] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.437019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    3.437169] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.496648] Non-volatile memory driver v1.3
[    3.963276] Bluetooth: Core ver 2.16
[    3.963296] NET: Registered protocol family 31
[    3.963298] Bluetooth: HCI device and connection manager initialized
[    3.963305] Bluetooth: HCI socket layer initialized
[    3.963307] Bluetooth: L2CAP socket layer initialized
[    3.963313] Bluetooth: SCO socket layer initialized
[    3.964708] usbcore: registered new interface driver btusb
[    4.338375] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    4.468607] media: Linux media interface: v0.10
[    4.471891] Linux video capture interface: v2.00
[    4.518478] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
[    4.537926] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
[    4.538078] usbcore: registered new interface driver uvcvideo
[    4.538083] USB Video Class driver (1.1.1)
[    6.473768] wlp1s0: authenticate with 00:24:8c:eb:ff:66
[    6.480100] wlp1s0: send auth to 00:24:8c:eb:ff:66 (try 1/3)
[    6.482750] wlp1s0: authenticated
[    6.483074] iwlwifi 0000:01:00.0 wlp1s0: disabling HT as WMM/QoS is not supported by the AP
[    6.483084] iwlwifi 0000:01:00.0 wlp1s0: disabling VHT as WMM/QoS is not supported by the AP
[    6.483367] wlp1s0: associate with 00:24:8c:eb:ff:66 (try 1/3)
[    6.486701] wlp1s0: RX AssocResp from 00:24:8c:eb:ff:66 (capab=0x431 status=0 aid=2)
[    6.496708] wlp1s0: associated
[    6.496833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[    6.534112] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:24:8c:eb:ff:66
[  776.460690] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[  776.473529] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[  969.874854] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[  969.887746] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 1061.757868] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 1061.790334] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 1346.112078] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 1346.143576] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 2241.768058] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 2241.780927] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
[ 2341.444767] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
[ 2341.479230] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.

cat /etc/asound.conf (which was working)

defaults.pcm.card 0
defaults.pcm.device 0
defaults.ctl.card 0

Trying to play a file:

mplayer Music/Arctic\ Monkeys/Favourite\ Most\ Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3

MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
[ass] FcFreeTypeQueryFace failed
Cannot open file '/home/dan/.mplayer/input.conf': No such file or directory
Failed to open /home/dan/.mplayer/input.conf.
Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick

Playing Music/Arctic Monkeys/Favourite Most Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3.
Detected file format: MP2/3 (MPEG audio layer 2/3) (libavformat)
[mp3 @ 0x7f7b7e07d760]max_analyze_duration 5000000 reached at 5015510 microseconds
[lavf] stream 0: audio (mp3), -aid 0
Clip info:
 title: teddy picker
 artist: Arctic Monkeys
 album: Favourite Worst Nightmare
 track: 2
 language: German
 genre: Rock
 encoded_by: LAME 3.97
 date: 2007
Load subtitles in Music/Arctic Monkeys/Favourite Most Nightmare/
Selected audio codec: MPEG 1.0/2.0/2.5 layers I, II, III [mpg123]
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
AO: [pulse] Init failed: Connection refused
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
A:   1.9 (01.8) of 163.2 (02:43.1)  1.6% 

aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav

Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono

speaker-test -c 2

speaker-test 1.0.27

Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
 0 - Front Left
 1 - Front Right
Time per period = 5.651455

Last edited by Kotrfa (2013-04-23 15:32:42)

Offline

#2 2013-04-23 19:10:22

Strider
Member
From: Belgium
Registered: 2009-08-04
Posts: 86

Re: Sound stopped working

You're not the only one. I have exactly the same issue. I ran all the commands you did and nothing special shows up. Could it be the update to kernel 3.8.8 ?


Win XP -> Ubuntu -> Fedora -> Arch -> Arch -> Arch -> Ar...

Offline

#3 2013-04-23 19:51:30

Strider
Member
From: Belgium
Registered: 2009-08-04
Posts: 86

Re: Sound stopped working

Okay. I just fixed my issue but I'm not sure which one of the following two fixed it :
1) in systemd I had the alsa-restore service running but not the alsa-store so I activated the latter and rebooted
2) After reboot I did the following. I have two sound playback devices : one on my motherboard and one on my nvidia card. For some reason in KDE the sound applet was pointing to the nvidia card. By selecting the other device (on motherboard) I noticed that the volume on this one was set to zero ... so I increased the volume. I also upgraded yesterday my nvidia driver so this might have caused this change


Win XP -> Ubuntu -> Fedora -> Arch -> Arch -> Arch -> Ar...

Offline

#4 2013-04-23 22:12:38

Kotrfa
Member
Registered: 2012-10-25
Posts: 146

Re: Sound stopped working

alsa-restore and alsa-store are both loaded, so it is not the cause.

dan@530uarch ~ $ systemctl status alsa-restore.service 
alsa-restore.service - Restore Sound Card State
   Loaded: loaded (/usr/lib/systemd/system/alsa-restore.service; static)
   Active: inactive (dead) since Wed 2013-04-24 00:09:25 CEST; 1min 58s ago
  Process: 245 ExecStart=/usr/sbin/alsactl restore (code=exited, status=0/SUCCESS)

dan@530uarch ~ $ systemctl status alsa-store.service 
alsa-store.service - Store Sound Card State
   Loaded: loaded (/usr/lib/systemd/system/alsa-store.service; static)
   Active: inactive (dead)

And I have only one audio device (according to logs and alsamixer), so it will be maybe another problem.

Thanks anyway

Last edited by Kotrfa (2013-04-24 17:08:44)

Offline

#5 2013-04-24 14:38:27

Mr.Smith1974
Member
Registered: 2013-04-13
Posts: 5

Re: Sound stopped working

I have the same problem. It started today.

Offline

#6 2013-04-24 17:09:35

Kotrfa
Member
Registered: 2012-10-25
Posts: 146

Re: Sound stopped working

Have you installed anything? What hardware are you using? Can you post some logs?

Offline

#7 2013-05-02 20:28:01

eNTi
Member
Registered: 2006-04-30
Posts: 107

Re: Sound stopped working

i have issues too. i think it has to do with pulseaudio and some faulty kernel driver introduced recently (i suppose).

Last edited by eNTi (2013-05-02 21:06:27)

Offline

#8 2013-05-06 05:17:07

1970
Member
Registered: 2013-05-06
Posts: 2

Re: Sound stopped working

Same for me after system upgrade on 2013-05-01:

pacmatic -Syu

Since then, no Audio output via HDMI anymore. Mainboard is Intel DH67BL.
Before upgrade, it worked. Audio via normal audio connector also still works.

$ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono

But on the connected (via HDMI) TV is nothing to hear. Video on TV via HDMI works. Checked also alsamixer volume setting.

With this, I hear the sound on the speakers connected with the Mainboard:

$ aplay /usr/share/sounds/alsa/Front_Center.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
  Sub-Geräte: 1/1
  Sub-Gerät #0: subdevice #0
$ lsmod | grep snd
snd_hda_codec_hdmi     24877  1 
snd_hda_codec_realtek    53315  1 
snd_hda_intel          28850  1 
snd_hda_codec          87310  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep               4746  1 snd_hda_codec
snd_pcm                62851  3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc          6038  2 snd_pcm,snd_hda_intel
snd_timer              14846  1 snd_pcm
snd                    44486  9 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore               4386  1 snd
$ cat /proc/asound/modules
 0 snd_hda_intel

I've read this, but did not help:
https://wiki.archlinux.org/index.php/Ta … chitecture

Here the list of upgraded packages:

grep 2013-05-01.*pgraded /var/log/pacman.log

http://pastebin.com/vXjp3Bw4

I also downgraded to the kernel version before upgrade:

pacman -U /var/cache/pacman/pkg/linux-3.7.4-1-i686.pkg.tar.xz

But that did not solve the problem. Also using linux-lts kernel did not help.

I have posted this also on the german Arch Linux board:
https://bbs.archlinux.de/viewtopic.php?id=23955

Last edited by 1970 (2013-05-06 05:23:59)

Offline

#9 2013-05-07 12:55:37

jrussell
Member
From: Cape Town, South Africa
Registered: 2012-08-16
Posts: 510

Re: Sound stopped working

Perhaps see what's happening is alsa mixer?


bitcoin: 1G62YGRFkMDwhGr5T5YGovfsxLx44eZo7U

Offline

#10 2013-05-09 18:53:10

1970
Member
Registered: 2013-05-06
Posts: 2

Re: Sound stopped working

jrussell wrote:

Perhaps see what's happening is alsa mixer?

Could You explain what You mean?

Offline

#11 2013-05-15 08:15:22

elfio
Member
Registered: 2011-05-03
Posts: 24

Re: Sound stopped working

I have similar issue. Speakers works fine until I plug and unplug the headphones, then speakers stop working.
After rebooting it works again.

$ pulseaudio -vvvvv

I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) falló: Operación no permitida
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: Esto es PulseAudio 3.0
D: [pulseaudio] main.c: Host de compilación: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilación CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Ejecutándose en el host: Linux x86_64 3.9.2-1-ARCH #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013
D: [pulseaudio] main.c: Se encontraron 2 CPUs.
I: [pulseaudio] main.c: El tamaño de la página es de 4096 bytes
D: [pulseaudio] main.c: Soporte para compilar con Valgrind: no
D: [pulseaudio] main.c: Ejecutándose en modo valgrind: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Build optimizado: si
D: [pulseaudio] main.c: FASTPATH definido, sólo se deshabilitan los chequeos fast path.
I: [pulseaudio] main.c: El ID de la máquina es c9f8190930e1147b80159531000003de
I: [pulseaudio] main.c: El ID de la sesión es 1.
I: [pulseaudio] main.c: Utilizando directorio de tiempo de ejecución /run/user/1000/pulse.
I: [pulseaudio] main.c: Utilizando directorio de estado /home/pablo/.config/pulse.
I: [pulseaudio] main.c: Utilizando directorio de módulos /usr/lib/pulse-3.0/modules.
I: [pulseaudio] main.c: Ejecutándose en modo de sistema: no
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: Ha fallado pa_pid_file_create().

Any idea?

Offline

#12 2013-05-15 11:56:13

YavkatA
Member
Registered: 2011-07-30
Posts: 12

Re: Sound stopped working

Similar issue here as well. My output jack stopped working. I am using gnome-shell, and I can see that when I plug my headphones, the headphone icon appears on the top panel, but there is no sound. Tried unmuting everything with alsamixer and it didn't change anything. Also in pavucontrol I can see the sound graphs moving, but there is no sound.
These issues started about 2-3 days ago, supposedly because of an update.

[yavor@yavor-gazelle ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: VT1802 Analog [VT1802 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 2: VT1802 Alt Analog [VT1802 Alt Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Offline

#13 2013-05-16 17:19:52

eNTi
Member
Registered: 2006-04-30
Posts: 107

Re: Sound stopped working

i found that pulseaudio works as long as pavucontrol is open in the background. if i close it, the daemon just dies on me a few seconds after i start anything sound related, like watching a video? i'm so confused.

Offline

Board footer

Powered by FluxBB