You are not logged in.

#1 2013-05-08 21:35:17

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 7,148

[new feature] mkinitcpio: Possibly missing firmware for module (LTS)

When upgrading linux-lts, mkinitcpio spat out the following errors:

==> WARNING: Possibly missing firmware for module: bfa
==> WARNING: Possibly missing firmware for module: aic94xx

Is this expected? When it says "possibly", does it mean it might not be missing? Or that it might not be needed? Or just that something is wrong?

When I searched, I came up with 3 threads. Two were from months ago and the other was about using Unity on Arch which I am definitely not doing.

I noticed mkinitcpio was upgraded yesterday or the day before so I'm not sure if this is related to that upgrade or the upgrade of the LTS kernel or the combination.

EDIT: and then my temperature went through the roof for no apparent reason. (Probably unconnected to the update but still.) Restarting seems to have fixed it, though...

Last edited by cfr (2013-05-09 01:12:55)


CLI Paste | How To Ask Questions

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#2 2013-05-08 21:42:12

flipper T
Member
Registered: 2012-09-14
Posts: 419

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

aic94xx- firmware is in aur as is bfa, but i cannot get brocade-firmware to work as i am not au fait with installing from .tgz


If I'm curt with you it's because time is a factor. I think fast, I talk fast and I need you guys to act fast if you wanna get out of this. So, pretty please... with sugar on top. Clean the [censored] car. -The Wolf

Offline

#3 2013-05-08 23:18:13

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 7,148

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

Why is it complaining, though? I've never used firmware from AUR and I don't usually get warnings.

Also my temperatures are high and fluctuating. (Not as high as before I restarted by 20-25 degrees higher than normal.) Yet I can't think what in the upgrade could cause that.


CLI Paste | How To Ask Questions

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#4 2013-05-08 23:36:14

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#5 2013-05-08 23:38:27

flipper T
Member
Registered: 2012-09-14
Posts: 419

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

I got exactly same warnings as you, but have noticed no difference in temps

Sorry that i can offer no further help

interested to hear more....

I suspected they are false flags, but you temp data is puzzling


[edit] cock-blocked by jasonwryan....f^%ing kiwisaussies

Last edited by flipper T (2013-05-08 23:40:43)


If I'm curt with you it's because time is a factor. I think fast, I talk fast and I need you guys to act fast if you wanna get out of this. So, pretty please... with sugar on top. Clean the [censored] car. -The Wolf

Offline

#6 2013-05-09 00:00:24

flipper T
Member
Registered: 2012-09-14
Posts: 419

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

"kiwiaussies" ????

has someone edited my insult?

I did not type that ! Something is rotten in the state of  Denniston !


If I'm curt with you it's because time is a factor. I think fast, I talk fast and I need you guys to act fast if you wanna get out of this. So, pretty please... with sugar on top. Clean the [censored] car. -The Wolf

Offline

#7 2013-05-09 01:12:16

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 7,148

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

jasonwryan wrote:

Ah, thanks.

I have no idea about the temp thing. I'm assuming it is unrelated. (Can't see how it could be related to mkinitcpio, at any rate.)


CLI Paste | How To Ask Questions

Arch Linux | x86_64 | GPT | EFI boot | refind | stub loader | systemd | LVM2 on LUKS
Lenovo x270 | Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz | Intel Wireless 8265/8275 | US keyboard w/ Euro | 512G NVMe INTEL SSDPEKKF512G7L

Offline

#8 2013-05-11 10:04:26

ghatanothoa
Member
Registered: 2013-05-11
Posts: 3

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

That is a relief, I just got this this morning and was anticipating headaches.  I'm not convinced that making people develop a blindspot regarding warnings in kernel updates is a such great plan though.

Offline

#9 2013-05-11 16:34:19

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

ghatanothoa wrote:

That is a relief, I just got this this morning and was anticipating headaches.  I'm not convinced that making people develop a blindspot regarding warnings in kernel updates is a such great plan though.

Headaches? Why, do you use your fallback image regularly? Have you ever used it? Do you even recognize the modules mentioned?

Last edited by falconindy (2013-05-11 16:34:42)

Offline

#10 2013-05-12 17:46:21

MisterAnderson
Member
Registered: 2011-09-04
Posts: 285

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

It IS annoying that mkinitcpio claims it failed with an error at the end because of these missing yet apparantly unneeded modules... Even thought it actually worked.


D:

Offline

#11 2013-05-12 18:02:34

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

It doesn't print the word "fail" or "error". It prints "warning..."


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#12 2013-05-12 18:47:41

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

MisterAnderson wrote:

It IS annoying that mkinitcpio claims it failed with an error at the end because of these missing yet apparantly unneeded modules... Even thought it actually worked.

I'd say it's more annoying that you're lying about mkinitcpio's behavior.

Offline

#13 2013-05-12 19:02:51

89c51
Member
Registered: 2012-06-05
Posts: 741

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

jasonwryan wrote:

It doesn't print the word "fail" or "error". It prints "warning..."


Got the same warning on the regular kernel and TBH its quite hairy seeing something like that on the kernel. tongue

Offline

#14 2013-05-12 19:13:01

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

89c51 wrote:
jasonwryan wrote:

It doesn't print the word "fail" or "error". It prints "warning..."


Got the same warning on the regular kernel and TBH its quite hairy seeing something like that on the kernel. tongue

Except that it isn't the kernel. It's not even an initramfs image that you've ever used.

Offline

#15 2013-05-12 23:57:03

weirddan455
Member
Registered: 2012-04-15
Posts: 209

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

I got the same warnings when I upgraded to kernel 3.9 (non-lts).  It only showed on the fallback image and not the regular one though.  I don't use those two modules so I ignored the warnings.  The fallback image contains a bunch of modules you'll probably never use while the regular image autodetects what it needs and gives a much more slimmed down image.

I could be wrong about that but that's how I understood it.

I'm not sure why it's giving those warnings (I've never seen it before kernel 3.9) but recheck the log:  It's probably only on your fallback image and you're probably not using those two modules anyway so I'm guessing only a small percentage of users will be affected by this.

Offline

#16 2013-05-13 00:37:42

nomorewindows
Member
Registered: 2010-04-03
Posts: 3,404

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

I've seen warnings for missing firmware for module on both default and fallback images.  I was thinking it was because I tweaked my /etc/mkinitcpio.conf, but it's happening on all of my equipment.  It's not just one, but for many firmware modules.  Granted, I don't use the firmware for those devices it displays a warning message about.  It produces a complete kernel image, I ignore it and move on.


I may have to CONSOLE you about your usage of ridiculously easy graphical interfaces...
Look ma, no mouse.

Offline

#17 2013-05-13 00:39:39

Jristz
Member
From: America/Santiago
Registered: 2011-06-11
Posts: 1,022

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

I have same error in NON-LTS NON-Fallback, I mean normal Kernel

I know that are warning, but any way to suppress/remove that warnings??


Well, I suppose that this is somekind of signature, no?

Offline

#18 2013-05-13 01:11:24

falconindy
Developer
From: New York, USA
Registered: 2009-10-22
Posts: 4,111
Website

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

weirddan455 wrote:

I'm not sure why it's giving those warnings (I've never seen it before kernel 3.9)

https://mailman.archlinux.org/pipermail … 24864.html
https://projects.archlinux.org/mkinitcp … 56851e2cd6

Offline

#19 2013-05-13 01:17:37

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,424
Website

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

commit message wrote:

I fully expect that this will
result in extra non-work for me in the form of closing invalid bug
reports.


...and reposting links from earlier in the thread. smile


Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#20 2013-05-13 02:50:08

sidneyk
Member
From: Bonner Springs, KS. USA
Registered: 2011-04-22
Posts: 129

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

I, too, was getting the same exact errors after mkinitcpio was first updated, but went immediately to the mailing lists and found the emails explaining that this behavior was to be expected now and didn't worry anymore about it. I was booting fine without that firmware before and I'm booting just fine without it now. Thanks falconindy for providing the necessary info to explain this at the point of originally introducing this update. The mailing lists are your friends guys.

Offline

#21 2013-05-13 03:00:36

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,208

Re: [new feature] mkinitcpio: Possibly missing firmware for module (LTS)

Closing at the request of the OP.  He has some reasons with which I agree.
Edit: Moved temporarily of site for moderator discussion.  Restored by general agreement of the moderator team.

Last edited by ewaller (2013-05-15 01:15:51)


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way

Offline

Board footer

Powered by FluxBB