You are not logged in.

#26 2013-07-04 00:52:22

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 5,662

Re: x.org refuses to start

Just to be clear: you have installed:

bumblebee
intel-dri
xf86-video-intel
xf86-video-nouveau
nouveau-dri
mesa

You have added yourself to the appropriate group and rebooted without a custom X configuration file. Can you post the log for X.org when you do that? The logs you have posted earlier are for cases where you don't have the intel driver installed or you do have a X conf file, right?


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | grub2 | systemd | LVM2 on LUKS
Lenovo x121e | Intel(R) Core(TM) i3-2367M CPU @ 1.40GHz GenuineIntel | Intel Centrino Wireless-N 1000 | US keyboard with Euro | 320G 7200 RPM Seagate HDD

Offline

#27 2013-07-04 04:52:26

abrambleninja
Member
Registered: 2013-06-19
Posts: 18

Re: x.org refuses to start

cfr wrote:

Just to be clear: you have installed:

bumblebee
intel-dri
xf86-video-intel
xf86-video-nouveau
nouveau-dri
mesa

Yes.

cfr wrote:

You have added yourself to the appropriate group

You mean the Bumblebee group? Yes, I added myself and root to that.

cfr wrote:

and rebooted without a custom X configuration file.

Yes.

cfr wrote:

Can you post the log for X.org when you do that? The logs you have posted earlier are for cases where you don't have the intel driver installed or you do have a X conf file, right?

Correct. I must not have ran that before. It started the X server! However, upon reviewing the log file, it appears to have started using the Intel driver solely, rather than the nvidia (nouveau) one that I wanted. The log is here:

[ 15202.352] 
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 15202.352] X Protocol Version 11, Revision 0
[ 15202.353] Build Operating System: Linux 3.9.7-1-ARCH x86_64 
[ 15202.353] Current Operating System: Linux hidden 3.9.8-1-ARCH #1 SMP PREEMPT Thu Jun 27 21:37:31 CEST 2013 x86_64
[ 15202.353] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=11326e68-dd84-4575-8a97-067094d61d91 ro quiet
[ 15202.353] Build Date: 01 July 2013  10:48:42AM
[ 15202.353]  
[ 15202.353] Current version of pixman: 0.30.0
[ 15202.353] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 15202.353] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15202.353] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul  3 21:41:56 2013
[ 15202.369] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 15202.389] (==) No Layout section.  Using the first Screen section.
[ 15202.389] (==) No screen section available. Using defaults.
[ 15202.389] (**) |-->Screen "Default Screen Section" (0)
[ 15202.389] (**) |   |-->Monitor "<default monitor>"
[ 15202.389] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[ 15202.389] (==) Automatically adding devices
[ 15202.389] (==) Automatically enabling devices
[ 15202.389] (==) Automatically adding GPU devices
[ 15202.413] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 15202.413] 	Entry deleted from font path.
[ 15202.413] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 15202.413] 	Entry deleted from font path.
[ 15202.413] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 15202.413] 	Entry deleted from font path.
[ 15202.413] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 15202.413] 	Entry deleted from font path.
[ 15202.413] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 15202.413] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 15202.414] 	Entry deleted from font path.
[ 15202.414] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 15202.414] (==) FontPath set to:
	/usr/share/fonts/misc/
[ 15202.414] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 15202.414] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15202.414] (II) Loader magic: 0x7fdc20
[ 15202.414] (II) Module ABI versions:
[ 15202.414] 	X.Org ANSI C Emulation: 0.4
[ 15202.414] 	X.Org Video Driver: 14.1
[ 15202.414] 	X.Org XInput driver : 19.1
[ 15202.414] 	X.Org Server Extension : 7.0
[ 15202.414] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 15202.416] (--) PCI:*(0:0:2:0) 8086:0166:1462:10cb rev 9, Mem @ 0xf6400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 15202.416] Initializing built-in extension Generic Event Extension
[ 15202.416] Initializing built-in extension SHAPE
[ 15202.416] Initializing built-in extension MIT-SHM
[ 15202.416] Initializing built-in extension XInputExtension
[ 15202.416] Initializing built-in extension XTEST
[ 15202.416] Initializing built-in extension BIG-REQUESTS
[ 15202.416] Initializing built-in extension SYNC
[ 15202.416] Initializing built-in extension XKEYBOARD
[ 15202.416] Initializing built-in extension XC-MISC
[ 15202.416] Initializing built-in extension SECURITY
[ 15202.416] Initializing built-in extension XINERAMA
[ 15202.416] Initializing built-in extension XFIXES
[ 15202.416] Initializing built-in extension RENDER
[ 15202.416] Initializing built-in extension RANDR
[ 15202.416] Initializing built-in extension COMPOSITE
[ 15202.416] Initializing built-in extension DAMAGE
[ 15202.416] Initializing built-in extension MIT-SCREEN-SAVER
[ 15202.416] Initializing built-in extension DOUBLE-BUFFER
[ 15202.416] Initializing built-in extension RECORD
[ 15202.416] Initializing built-in extension DPMS
[ 15202.417] Initializing built-in extension X-Resource
[ 15202.417] Initializing built-in extension XVideo
[ 15202.417] Initializing built-in extension XVideo-MotionCompensation
[ 15202.417] Initializing built-in extension XFree86-VidModeExtension
[ 15202.417] Initializing built-in extension XFree86-DGA
[ 15202.417] Initializing built-in extension XFree86-DRI
[ 15202.417] Initializing built-in extension DRI2
[ 15202.417] (II) LoadModule: "glx"
[ 15202.443] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15202.453] (II) Module glx: vendor="X.Org Foundation"
[ 15202.453] 	compiled for 1.14.2, module version = 1.0.0
[ 15202.453] 	ABI class: X.Org Server Extension, version 7.0
[ 15202.453] (==) AIGLX enabled
[ 15202.453] Loading extension GLX
[ 15202.453] (==) Matched intel as autoconfigured driver 0
[ 15202.453] (==) Matched intel as autoconfigured driver 1
[ 15202.453] (==) Matched vesa as autoconfigured driver 2
[ 15202.453] (==) Matched modesetting as autoconfigured driver 3
[ 15202.453] (==) Matched fbdev as autoconfigured driver 4
[ 15202.453] (==) Assigned the driver to the xf86ConfigLayout
[ 15202.453] (II) LoadModule: "intel"
[ 15202.454] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 15202.484] (II) Module intel: vendor="X.Org Foundation"
[ 15202.484] 	compiled for 1.14.2, module version = 2.21.10
[ 15202.484] 	Module class: X.Org Video Driver
[ 15202.484] 	ABI class: X.Org Video Driver, version 14.1
[ 15202.484] (II) LoadModule: "vesa"
[ 15202.484] (WW) Warning, couldn't open module vesa
[ 15202.484] (II) UnloadModule: "vesa"
[ 15202.484] (II) Unloading vesa
[ 15202.484] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 15202.484] (II) LoadModule: "modesetting"
[ 15202.484] (WW) Warning, couldn't open module modesetting
[ 15202.484] (II) UnloadModule: "modesetting"
[ 15202.484] (II) Unloading modesetting
[ 15202.484] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 15202.484] (II) LoadModule: "fbdev"
[ 15202.484] (WW) Warning, couldn't open module fbdev
[ 15202.484] (II) UnloadModule: "fbdev"
[ 15202.484] (II) Unloading fbdev
[ 15202.484] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 15202.485] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
	Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
	Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
	Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
	Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
	HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
	Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
	Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
	Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
	Haswell SDV Server (GT2), Haswell SDV Server (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
	Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
	HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
	Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
	Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
	Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
	Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
	HD Graphics 4600, Iris(TM) Pro Graphics 5200,
	Haswell CRW Server (GT1), Haswell CRW Server (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
	Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 15202.485] (++) using VT number 1

[ 15202.501] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[ 15202.501] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 15202.501] (==) intel(0): RGB weight 888
[ 15202.501] (==) intel(0): Default visual is TrueColor
[ 15202.501] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 15202.501] (**) intel(0): Relaxed fencing enabled
[ 15202.501] (**) intel(0): Wait on SwapBuffers? enabled
[ 15202.501] (**) intel(0): Triple buffering? enabled
[ 15202.501] (**) intel(0): Framebuffer tiled
[ 15202.501] (**) intel(0): Pixmaps tiled
[ 15202.501] (**) intel(0): 3D buffers tiled
[ 15202.501] (**) intel(0): SwapBuffers wait enabled
[ 15202.501] (==) intel(0): video overlay key set to 0x101fe
[ 15202.502] (II) intel(0): Output LVDS1 has no monitor section
[ 15202.505] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 15202.506] (II) intel(0): Output VGA2 has no monitor section
[ 15202.507] (II) intel(0): Output HDMI1 has no monitor section
[ 15202.507] (II) intel(0): Output DP1 has no monitor section
[ 15202.507] (II) intel(0): EDID for output LVDS1
[ 15202.507] (II) intel(0): Manufacturer: LGD  Model: 259  Serial#: 0
[ 15202.507] (II) intel(0): Year: 2009  Week: 0
[ 15202.507] (II) intel(0): EDID Version: 1.3
[ 15202.507] (II) intel(0): Digital Display Input
[ 15202.507] (II) intel(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[ 15202.507] (II) intel(0): Gamma: 2.20
[ 15202.507] (II) intel(0): No DPMS capabilities specified
[ 15202.507] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[ 15202.507] (II) intel(0): First detailed timing is preferred mode
[ 15202.507] (II) intel(0): redX: 0.617 redY: 0.349   greenX: 0.313 greenY: 0.595
[ 15202.507] (II) intel(0): blueX: 0.151 blueY: 0.056   whiteX: 0.313 whiteY: 0.329
[ 15202.507] (II) intel(0): Manufacturer's mask: 0
[ 15202.507] (II) intel(0): Supported detailed timing:
[ 15202.507] (II) intel(0): clock: 138.5 MHz   Image Size:  345 x 194 mm
[ 15202.507] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 15202.507] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[ 15202.507] (II) intel(0):  LG Display
[ 15202.507] (II) intel(0):  LP156WF1-TLF3
[ 15202.507] (II) intel(0): EDID (in hex):
[ 15202.507] (II) intel(0): 	00ffffffffffff0030e4590200000000
[ 15202.507] (II) intel(0): 	00130103802313780a15d59e59509826
[ 15202.507] (II) intel(0): 	0e505400000001010101010101010101
[ 15202.507] (II) intel(0): 	0101010101011a3680a070381f403020
[ 15202.507] (II) intel(0): 	350059c2100000190000000000000000
[ 15202.507] (II) intel(0): 	00000000000000000000000000fe004c
[ 15202.507] (II) intel(0): 	4720446973706c61790a2020000000fe
[ 15202.507] (II) intel(0): 	004c503135365746312d544c4633003c
[ 15202.507] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 15202.507] (II) intel(0): Printing probed modes for output LVDS1
[ 15202.508] (II) intel(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[ 15202.508] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 15202.508] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 15202.508] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 15202.508] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 15202.508] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 15202.508] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 15202.508] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 15202.509] (II) intel(0): EDID for output VGA2
[ 15202.509] (II) intel(0): EDID for output HDMI1
[ 15202.509] (II) intel(0): EDID for output DP1
[ 15202.509] (II) intel(0): Output LVDS1 connected
[ 15202.509] (II) intel(0): Output VGA2 disconnected
[ 15202.509] (II) intel(0): Output HDMI1 disconnected
[ 15202.509] (II) intel(0): Output DP1 disconnected
[ 15202.509] (II) intel(0): Using exact sizes for initial modes
[ 15202.509] (II) intel(0): Output LVDS1 using initial mode 1920x1080
[ 15202.509] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 15202.509] (II) intel(0): Kernel page flipping support detected, enabling
[ 15202.509] (==) intel(0): DPI set to (96, 96)
[ 15202.509] (II) Loading sub module "fb"
[ 15202.509] (II) LoadModule: "fb"
[ 15202.509] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15202.521] (II) Module fb: vendor="X.Org Foundation"
[ 15202.522] 	compiled for 1.14.2, module version = 1.0.0
[ 15202.522] 	ABI class: X.Org ANSI C Emulation, version 0.4
[ 15202.522] (II) Loading sub module "dri2"
[ 15202.522] (II) LoadModule: "dri2"
[ 15202.522] (II) Module "dri2" already built-in
[ 15202.522] (==) Depth 24 pixmap format is 32 bpp
[ 15202.523] (II) intel(0): [DRI2] Setup complete
[ 15202.523] (II) intel(0): [DRI2]   DRI driver: i965
[ 15202.523] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 15202.526] (II) UXA(0): Driver registered support for the following operations:
[ 15202.526] (II)         solid
[ 15202.526] (II)         copy
[ 15202.526] (II)         composite (RENDER acceleration)
[ 15202.526] (II)         put_image
[ 15202.526] (II)         get_image
[ 15202.526] (==) intel(0): Backing store disabled
[ 15202.526] (==) intel(0): Silken mouse enabled
[ 15202.526] (II) intel(0): Initializing HW Cursor
[ 15202.526] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 15202.534] (==) intel(0): DPMS enabled
[ 15202.534] (==) intel(0): Intel XvMC decoder enabled
[ 15202.534] (II) intel(0): Set up textured video
[ 15202.534] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 15202.534] (II) intel(0): direct rendering: DRI2 Enabled
[ 15202.534] (==) intel(0): hotplug detection: "enabled"
[ 15202.552] (--) RandR disabled
[ 15202.591] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 15202.591] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 15202.591] (II) AIGLX: enabled GLX_ARB_create_context
[ 15202.591] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 15202.591] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 15202.591] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 15202.591] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 15202.591] (II) AIGLX: Loaded and initialized i965
[ 15202.591] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 15202.592] (II) intel(0): Setting screen physical size to 508 x 285
[ 15202.798] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 15202.798] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15202.798] (II) LoadModule: "evdev"
[ 15202.798] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15202.818] (II) Module evdev: vendor="X.Org Foundation"
[ 15202.818] 	compiled for 1.14.0, module version = 2.8.0
[ 15202.818] 	Module class: X.Org XInput Driver
[ 15202.818] 	ABI class: X.Org XInput driver, version 19.1
[ 15202.818] (II) Using input driver 'evdev' for 'Power Button'
[ 15202.818] (**) Power Button: always reports core events
[ 15202.818] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 15202.818] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15202.818] (--) evdev: Power Button: Found keys
[ 15202.818] (II) evdev: Power Button: Configuring as keyboard
[ 15202.818] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 15202.818] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15202.818] (**) Option "xkb_rules" "evdev"
[ 15202.818] (**) Option "xkb_model" "evdev"
[ 15202.818] (**) Option "xkb_layout" "us"
[ 15202.842] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 15202.842] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15202.842] (II) Using input driver 'evdev' for 'Video Bus'
[ 15202.842] (**) Video Bus: always reports core events
[ 15202.842] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 15202.842] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15202.842] (--) evdev: Video Bus: Found keys
[ 15202.842] (II) evdev: Video Bus: Configuring as keyboard
[ 15202.842] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11/event11"
[ 15202.843] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 15202.843] (**) Option "xkb_rules" "evdev"
[ 15202.843] (**) Option "xkb_model" "evdev"
[ 15202.843] (**) Option "xkb_layout" "us"
[ 15202.843] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 15202.843] (II) No input driver specified, ignoring this device.
[ 15202.843] (II) This device may have been added with another device file.
[ 15202.844] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 15202.844] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 15202.844] (II) Using input driver 'evdev' for 'Video Bus'
[ 15202.844] (**) Video Bus: always reports core events
[ 15202.844] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 15202.844] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 15202.844] (--) evdev: Video Bus: Found keys
[ 15202.844] (II) evdev: Video Bus: Configuring as keyboard
[ 15202.844] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input10/event10"
[ 15202.844] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 15202.844] (**) Option "xkb_rules" "evdev"
[ 15202.844] (**) Option "xkb_model" "evdev"
[ 15202.844] (**) Option "xkb_layout" "us"
[ 15202.845] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 15202.845] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15202.845] (II) Using input driver 'evdev' for 'Power Button'
[ 15202.845] (**) Power Button: always reports core events
[ 15202.845] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 15202.845] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15202.845] (--) evdev: Power Button: Found keys
[ 15202.845] (II) evdev: Power Button: Configuring as keyboard
[ 15202.845] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 15202.845] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 15202.845] (**) Option "xkb_rules" "evdev"
[ 15202.845] (**) Option "xkb_model" "evdev"
[ 15202.845] (**) Option "xkb_layout" "us"
[ 15202.845] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 15202.845] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/event4)
[ 15202.845] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev keyboard catchall"
[ 15202.845] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v1.0'
[ 15202.845] (**) Microsoft Microsoft® Nano Transceiver v1.0: always reports core events
[ 15202.845] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Device: "/dev/input/event4"
[ 15202.845] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Vendor 0x45e Product 0x745
[ 15202.845] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found keys
[ 15202.845] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as keyboard
[ 15202.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4/event4"
[ 15202.845] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v1.0" (type: KEYBOARD, id 10)
[ 15202.845] (**) Option "xkb_rules" "evdev"
[ 15202.845] (**) Option "xkb_model" "evdev"
[ 15202.845] (**) Option "xkb_layout" "us"
[ 15202.846] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/event5)
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev pointer catchall"
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev keyboard catchall"
[ 15202.846] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v1.0'
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: always reports core events
[ 15202.846] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Device: "/dev/input/event5"
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Vendor 0x45e Product 0x745
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found 9 mouse buttons
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found scroll wheel(s)
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found relative axes
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found x and y relative axes
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found absolute axes
[ 15202.846] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Forcing absolute x/y axes to exist.
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found keys
[ 15202.846] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as mouse
[ 15202.846] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as keyboard
[ 15202.846] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Adding scrollwheel support
[ 15202.846] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: YAxisMapping: buttons 4 and 5
[ 15202.846] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15202.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input5/event5"
[ 15202.846] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v1.0" (type: KEYBOARD, id 11)
[ 15202.846] (**) Option "xkb_rules" "evdev"
[ 15202.846] (**) Option "xkb_model" "evdev"
[ 15202.846] (**) Option "xkb_layout" "us"
[ 15202.846] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: initialized for relative axes.
[ 15202.846] (WW) evdev: Microsoft Microsoft® Nano Transceiver v1.0: ignoring absolute axes.
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) keeping acceleration scheme 1
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration profile 0
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration factor: 2.000
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration threshold: 4
[ 15202.846] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/mouse0)
[ 15202.846] (II) No input driver specified, ignoring this device.
[ 15202.846] (II) This device may have been added with another device file.
[ 15202.846] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/event6)
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: Applying InputClass "evdev keyboard catchall"
[ 15202.846] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Nano Transceiver v1.0'
[ 15202.846] (**) Microsoft Microsoft® Nano Transceiver v1.0: always reports core events
[ 15202.846] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Device: "/dev/input/event6"
[ 15202.846] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Using mtdev for this device
[ 15202.846] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Vendor 0x45e Product 0x745
[ 15202.847] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found 1 mouse buttons
[ 15202.847] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found scroll wheel(s)
[ 15202.847] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found relative axes
[ 15202.847] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found absolute axes
[ 15202.847] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found absolute multitouch axes
[ 15202.847] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found x and y absolute axes
[ 15202.847] (--) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Found keys
[ 15202.847] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Forcing relative x/y axes to exist.
[ 15202.847] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as mouse
[ 15202.847] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Configuring as keyboard
[ 15202.847] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Adding scrollwheel support
[ 15202.847] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: YAxisMapping: buttons 4 and 5
[ 15202.847] (**) evdev: Microsoft Microsoft® Nano Transceiver v1.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15202.847] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/input/input6/event6"
[ 15202.847] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Nano Transceiver v1.0" (type: KEYBOARD, id 12)
[ 15202.847] (**) Option "xkb_rules" "evdev"
[ 15202.847] (**) Option "xkb_model" "evdev"
[ 15202.847] (**) Option "xkb_layout" "us"
[ 15202.847] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: initialized for relative axes.
[ 15202.847] (WW) evdev: Microsoft Microsoft® Nano Transceiver v1.0: ignoring absolute axes.
[ 15202.847] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) keeping acceleration scheme 1
[ 15202.847] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration profile 0
[ 15202.847] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration factor: 2.000
[ 15202.847] (**) Microsoft Microsoft® Nano Transceiver v1.0: (accel) acceleration threshold: 4
[ 15202.847] (II) config/udev: Adding input device Microsoft Microsoft® Nano Transceiver v1.0 (/dev/input/js0)
[ 15202.847] (II) No input driver specified, ignoring this device.
[ 15202.847] (II) This device may have been added with another device file.
[ 15202.847] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 15202.847] (II) No input driver specified, ignoring this device.
[ 15202.847] (II) This device may have been added with another device file.
[ 15202.847] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 15202.847] (II) No input driver specified, ignoring this device.
[ 15202.847] (II) This device may have been added with another device file.
[ 15202.847] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event14)
[ 15202.847] (II) No input driver specified, ignoring this device.
[ 15202.847] (II) This device may have been added with another device file.
[ 15202.847] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 15202.848] (II) No input driver specified, ignoring this device.
[ 15202.848] (II) This device may have been added with another device file.
[ 15202.848] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[ 15202.848] (II) No input driver specified, ignoring this device.
[ 15202.848] (II) This device may have been added with another device file.
[ 15202.848] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event17)
[ 15202.848] (II) No input driver specified, ignoring this device.
[ 15202.848] (II) This device may have been added with another device file.
[ 15202.848] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event9)
[ 15202.848] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 15202.848] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 15202.848] (**) BisonCam, NB Pro: always reports core events
[ 15202.848] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event9"
[ 15202.848] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x30c
[ 15202.848] (--) evdev: BisonCam, NB Pro: Found keys
[ 15202.848] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 15202.848] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9/event9"
[ 15202.848] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 13)
[ 15202.848] (**) Option "xkb_rules" "evdev"
[ 15202.848] (**) Option "xkb_model" "evdev"
[ 15202.848] (**) Option "xkb_layout" "us"
[ 15202.848] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 15202.848] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 15202.848] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 15202.848] (**) AT Translated Set 2 keyboard: always reports core events
[ 15202.848] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 15202.848] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 15202.848] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 15202.848] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 15202.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 15202.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 15202.848] (**) Option "xkb_rules" "evdev"
[ 15202.848] (**) Option "xkb_model" "evdev"
[ 15202.848] (**) Option "xkb_layout" "us"
[ 15202.849] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event18)
[ 15202.849] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 15202.849] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 15202.849] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 15202.849] (II) LoadModule: "synaptics"
[ 15202.849] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 15202.856] (II) Module synaptics: vendor="X.Org Foundation"
[ 15202.856] 	compiled for 1.14.1, module version = 1.7.1
[ 15202.856] 	Module class: X.Org XInput Driver
[ 15202.856] 	ABI class: X.Org XInput driver, version 19.1
[ 15202.856] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 15202.856] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15202.856] (**) Option "Device" "/dev/input/event18"
[ 15202.868] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 15202.868] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1138 - 5802 (res 61)
[ 15202.868] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 910 - 4942 (res 91)
[ 15202.868] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 15202.868] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 15202.868] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 15202.868] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 15202.868] (**) Option "TapButton1" "1"
[ 15202.868] (**) Option "TapButton2" "2"
[ 15202.868] (**) Option "TapButton3" "3"
[ 15202.868] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 15202.868] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 15202.895] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input18/event18"
[ 15202.895] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 15202.895] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 15202.895] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 15202.895] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.032
[ 15202.895] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 15202.895] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 15202.895] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 15202.895] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 15202.896] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 15202.896] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 15202.896] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 15202.896] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 15202.896] (II) No input driver specified, ignoring this device.
[ 15202.896] (II) This device may have been added with another device file.
[ 15202.897] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event8)
[ 15202.897] (**) MSI WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 15202.897] (II) Using input driver 'evdev' for 'MSI WMI hotkeys'
[ 15202.897] (**) MSI WMI hotkeys: always reports core events
[ 15202.897] (**) evdev: MSI WMI hotkeys: Device: "/dev/input/event8"
[ 15202.897] (--) evdev: MSI WMI hotkeys: Vendor 0 Product 0
[ 15202.897] (--) evdev: MSI WMI hotkeys: Found keys
[ 15202.897] (II) evdev: MSI WMI hotkeys: Configuring as keyboard
[ 15202.897] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[ 15202.897] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 16)
[ 15202.897] (**) Option "xkb_rules" "evdev"
[ 15202.897] (**) Option "xkb_model" "evdev"
[ 15202.897] (**) Option "xkb_layout" "us"
[ 15215.051] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[ 15215.051] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 15215.051] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 15215.591] (II) LoadModule: "modesetting"
[ 15215.591] (WW) Warning, couldn't open module modesetting
[ 15215.591] (II) UnloadModule: "modesetting"
[ 15215.591] (II) Unloading modesetting
[ 15215.591] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 15215.591] xf86: found device 1
[ 15215.591] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-VGA-3 (null)
[ 15217.563] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-VGA-3 (null)
[ 15217.566] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0 /dev/dri/card0
[ 15538.309] (II) evdev: MSI WMI hotkeys: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) UnloadModule: "synaptics"
[ 15538.309] (II) evdev: AT Translated Set 2 keyboard: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) evdev: BisonCam, NB Pro: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) evdev: Microsoft Microsoft® Nano Transceiver v1.0: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) evdev: Power Button: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) evdev: Video Bus: Close
[ 15538.309] (II) UnloadModule: "evdev"
[ 15538.309] (II) evdev: Video Bus: Close
[ 15538.310] (II) UnloadModule: "evdev"
[ 15538.310] (II) evdev: Power Button: Close
[ 15538.310] (II) UnloadModule: "evdev"
[ 15539.066] (EE) Server terminated successfully (0). Closing log file.

Just to make sure we're on the same page, I want Bumblebee to run with nouveau by default, and switch to the Intel card if it's low on power (or not plugged in). This is possible, correct?

EDIT: Sorry to reply late. I was out of the house for a few hours and forgot to start my SSH server on my computer.

Last edited by abrambleninja (2013-07-04 04:53:46)


Such is life in glorious Arstotzka.

Offline

#28 2013-07-04 10:49:14

Rohdehoved
Member
Registered: 2013-02-25
Posts: 7

Re: x.org refuses to start

Mr.Elendig wrote:
Rohdehoved wrote:

I have the same problem, just installed Arch for the first time, right now. I've generated a Xorg config file, just as abrambleninja (OP), same command and everything, then made the

BusID "PCI:1:0:0"

I put that line just under the Driver line, which already said "nvidia" (My GPU/screencard (whatever) is nvidia, I followed the Arch Linux Beginner Guide and installed Arch successfully, first error that I can't handle myself is now).

When I try to start Xorg with "startx", I get the same error, refering to the Xorg.0.log file. I check that file, and it still says

(...)Fatal server error: 
(....) no screens found(EE) (.....)

Above that it says:

Screen(s) found, but none have a usable configuration.

Does anyone know, how I give my screen a usable configuration? It's an Alienware m11" (laptop).

Also, should I post the .log file and .conf file? I'm on another laptop right now, googling my way through everything, I tried using the elinks in another tty, but I didn't like that at all. Is there some easier way to share the log? Should I transfer the .log and .conf etc. to an USB pen, then open here? Just wondering how you do it tongue

You probably have optimus, which makes this a totally different problem than the one OP had. Check out the bumblebee wiki page.

Thanks, I'm installing and trying to break down the problems I've already encountered, lol. Længe leve Helle Thorning!

Offline

#29 2013-07-04 21:22:17

cfr
Member
From: Cymru
Registered: 2011-11-27
Posts: 5,662

Re: x.org refuses to start

abrambleninja wrote:

! However, upon reviewing the log file, it appears to have started using the Intel driver solely, rather than the nvidia (nouveau) one that I wanted.

This is expected. It at least shows it works. I think it is easier to get the default working first and then configure than to try to get everything in final state in one go. At least, when that isn't working it is better to break the installation/configuration into more manageable stages so you can figure out where the problem is. Maybe that's just me, though.

Just to make sure we're on the same page, I want Bumblebee to run with nouveau by default, and switch to the Intel card if it's low on power (or not plugged in). This is possible, correct?

I have no idea. I know only what is on the wiki. I have never used bumblebee. I have used nouveau and intel but that's about it and I've not used them together. But I think it is possible, yes, just from the wiki.

Have you read https://wiki.archlinux.org/index.php/Bu … g_bbswitch? That seems to offer a way to do what you want because you could, if I've understood correctly, have the default set to use the card rather than to not use it? Would that do it?


How To Ask Questions The Smart Way | Help Vampires

Arch Linux | x86_64 | GPT | EFI boot | grub2 | systemd | LVM2 on LUKS
Lenovo x121e | Intel(R) Core(TM) i3-2367M CPU @ 1.40GHz GenuineIntel | Intel Centrino Wireless-N 1000 | US keyboard with Euro | 320G 7200 RPM Seagate HDD

Offline

Board footer

Powered by FluxBB