You are not logged in.
Pages: 1
When I plugin in my phone and hit the tether option, The Network Manager fails to connect.
But when I turn the tether option off, then on again, it connects.
from dmesg
[ 71.090376] usb 1-5: new high-speed USB device number 5 using ehci-pci
[ 71.278544] usbcore: registered new interface driver cdc_ether
[ 71.284344] rndis_host 1-5:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-5, RNDIS device, d2:a2:92:a2:52:8f
[ 71.285097] usbcore: registered new interface driver rndis_host
[ 71.290774] systemd-udevd[517]: renamed network interface usb0 to enp0s2f1u5
[ 140.651320] usb 1-5: USB disconnect, device number 5
[ 140.654143] rndis_host 1-5:1.0 enp0s2f1u5: unregister 'rndis_host' usb-0000:00:02.1-5, RNDIS device
[ 141.486734] usb 2-5: new full-speed USB device number 4 using ohci_hcd
[ 141.653460] usb 2-5: device descriptor read/64, error -62
[ 141.923379] usb 2-5: device descriptor read/64, error -62
[ 142.186714] usb 2-5: new full-speed USB device number 5 using ohci_hcd
[ 142.353360] usb 2-5: device descriptor read/64, error -62
[ 142.623346] usb 2-5: device descriptor read/64, error -62
[ 142.886688] usb 2-5: new full-speed USB device number 6 using ohci_hcd
[ 143.293392] usb 2-5: device not accepting address 6, error -62
[ 143.453365] usb 2-5: new full-speed USB device number 7 using ohci_hcd
[ 143.860025] usb 2-5: device not accepting address 7, error -62
[ 143.860063] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 190.100019] usb 1-5: new high-speed USB device number 7 using ehci-pci
[ 190.226839] scsi5 : usb-storage 1-5:1.0
[ 191.230892] scsi 5:0:0:0: Direct-Access HTC File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 191.235259] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 192.649423] usb 1-5: USB disconnect, device number 7
[ 192.910028] usb 1-5: new high-speed USB device number 8 using ehci-pci
[ 193.037473] rndis_host 1-5:1.0 usb0: register 'rndis_host' at usb-0000:00:02.1-5, RNDIS device, d6:d1:0d:a0:f9:fc
[ 193.056468] systemd-udevd[556]: renamed network interface usb0 to enp0s2f1u5
here is /etc/dhcpcd.conf
# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.
# Inform the DHCP server of our hostname for DDNS.
hostname
# To share the DHCP lease across OSX and Windows a ClientID is needed.
# Enabling this may get a different lease than the kernel DHCP client.
# Some upstream DHCP servers may also require a ClientID, such as FRITZ!Box.
#clientid
# A list of options to request from the DHCP server.
## Change
nooption domain_name_servers
#option domain_name_servers, domain_name, domain_search, host_name
option domain_name, domain_search, host_name
## End of change
option classless_static_routes
# Most distributions have NTP support.
option ntp_servers
# Respect the network MTU.
option interface_mtu
# A ServerID is required by RFC2131.
require dhcp_server_identifier
# A hook script is provided to lookup the hostname if not set by the DHCP
# server, but it should not be run by default.
## Change
nohook resolv.conf
## End of change
nohook lookup-hostname
noipv4ll
here is /etc/resolv.conf
nameserver 8.8.8.8
Got the IP from following the Arch Wiki: Network Configuration.
It was the only way to successfully ping google.com.
So I just kept it.
Last edited by grimgent (2013-07-05 06:06:36)
3.9.9-1-ARCH #1 SMP PREEMPT i686
AMD Sempron(tm) Processor LE-1300
2 GIGS RAM, 320 GIG Hard Drive
NVIDIA GeForce 6160 SE integrated graphics
Offline
systemctl status dhcpcd@enp0s2f1u5.service
dhcpcd@enp0s2f1u5.service - dhcpcd on enp0s2f1u5
Loaded: loaded (/usr/lib/systemd/system/dhcpcd@.service; enabled)
Active: failed (Result: exit-code) since Thu 2013-07-04 23:53:17 MDT; 5min ago
Process: 574 ExecStop=/usr/sbin/dhcpcd -x %I (code=exited, status=0/SUCCESS)
Process: 664 ExecStart=/usr/sbin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Main PID: 561 (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/dhcpcd@.service/dhcpcd@enp0s2f1u5.service
Last edited by grimgent (2013-07-05 07:00:02)
3.9.9-1-ARCH #1 SMP PREEMPT i686
AMD Sempron(tm) Processor LE-1300
2 GIGS RAM, 320 GIG Hard Drive
NVIDIA GeForce 6160 SE integrated graphics
Offline
Pages: 1