You are not logged in.

#26 2013-09-23 14:28:09

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

Wow, that is gonna be a huge post

$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.11.1-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw mem=4G quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cff98000-0x00000000cffbffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cffc0000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
[    0.000000] e820: remove [mem 0x100000000-0xfffffffffffffffe] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: user-defined physical RAM map:
[    0.000000] user: [mem 0x0000000000000000-0x000000000009ebff] usable
[    0.000000] user: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[    0.000000] user: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[    0.000000] user: [mem 0x0000000000100000-0x00000000cff7ffff] usable
[    0.000000] user: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
[    0.000000] user: [mem 0x00000000cff98000-0x00000000cffbffff] ACPI NVS
[    0.000000] user: [mem 0x00000000cffc0000-0x00000000cfffffff] reserved
[    0.000000] user: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: System manufacturer System Product Name/M5A87, BIOS 1402    11/15/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000042f000000 aka 17136M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[    0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[    0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcfc00000-0xcfdfffff]
[    0.000000]  [mem 0xcfc00000-0xcfdfffff] page 2M
[    0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcc000000-0xcfbfffff]
[    0.000000]  [mem 0xcc000000-0xcfbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x80000000-0xcbffffff]
[    0.000000]  [mem 0x80000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xcbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0xcfe00000-0xcff7ffff]
[    0.000000]  [mem 0xcfe00000-0xcff7ffff] page 4k
[    0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37676000-0x37b32fff]
[    0.000000] ACPI: RSDP 00000000000fb850 00024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 00000000cff80100 00054 (v01 111512 XSDT1057 20121115 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 111512 FACP1057 20121115 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cff80460 0D051 (v01  A1866 A1866001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 00000000cff98000 00040
[    0.000000] ACPI: APIC 00000000cff80390 0008C (v01 111512 APIC1057 20121115 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cff80420 0003C (v01 111512 OEMMCFG  20121115 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cff98040 00072 (v01 111512 OEMB1057 20121115 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cff8f8b0 00038 (v01 111512 OEMHPET  20121115 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cff8f8f0 01714 (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000cff7ffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0xcff7ffff]
[    0.000000]   NODE_DATA [mem 0xcff7b000-0xcff7ffff]
[    0.000000]  [ffffea0000000000-ffffea00033fffff] PMD -> [ffff8800cc200000-ffff8800cf5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xcff7ffff]
[    0.000000] On node 0 totalpages: 851741
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13246 pages used for memmap
[    0.000000]   DMA32 zone: 847744 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[    0.000000] e820: [mem 0xd0000000-0xff9fffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff8800cfc00000 s86528 r8192 d24064 u262144
[    0.000000] pcpu-alloc: s86528 r8192 d24064 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 838410
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rw mem=4G quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ 0 size 32 MB
[    0.000000] Memory: 3336112K/3406964K available (5045K kernel code, 795K rwdata, 1696K rodata, 1140K init, 1284K bss, 70852K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 13631488 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 3100.017 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.36 BogoMIPS (lpj=10333390)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000038] Security Framework initialized
[    0.000047] AppArmor: AppArmor disabled by boot time parameter
[    0.000048] Yama: becoming mindful.
[    0.000355] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001386] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001819] Mount-cache hash table entries: 256
[    0.002013] Initializing cgroup subsys memory
[    0.002024] Initializing cgroup subsys devices
[    0.002026] Initializing cgroup subsys freezer
[    0.002027] Initializing cgroup subsys net_cls
[    0.002029] Initializing cgroup subsys blkio
[    0.002048] tseg: 0000000000
[    0.002053] CPU: Physical Processor ID: 0
[    0.002054] CPU: Processor Core ID: 0
[    0.002056] mce: CPU supports 7 MCE banks
[    0.002062] LVT offset 1 assigned for vector 0xf9
[    0.002068] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
[    0.002159] Freeing SMP alternatives memory: 20K (ffffffff819e5000 - ffffffff819ea000)
[    0.002917] ACPI: Core revision 20130517
[    0.007044] ACPI: All ACPI Tables successfully acquired
[    0.009347] ftrace: allocating 20088 entries in 79 pages
[    0.017786] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.050760] smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
[    0.157181] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.157187] ... version:                0
[    0.157188] ... bit width:              48
[    0.157189] ... generic registers:      6
[    0.157190] ... value mask:             0000ffffffffffff
[    0.157191] ... max period:             00007fffffffffff
[    0.157192] ... fixed-purpose events:   0
[    0.157194] ... event mask:             000000000000003f
[    0.177222] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.183881] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 OK
[    0.290235] Brought up 8 CPUs
[    0.290239] smpboot: Total of 8 processors activated (49620.95 BogoMIPS)
[    0.305735] devtmpfs: initialized
[    0.306964] PM: Registering ACPI NVS region [mem 0xcff98000-0xcffbffff] (163840 bytes)
[    0.307919] RTC time: 13:21:24, date: 09/23/13
[    0.307963] NET: Registered protocol family 16
[    0.308151] ACPI: bus type PCI registered
[    0.308153] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.308215] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.308218] PCI: not using MMCONFIG
[    0.308219] PCI: Using configuration type 1 for base access
[    0.308220] PCI: Using configuration type 1 for extended access
[    0.308501] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.308502] mtrr: probably your BIOS does not setup all CPUs.
[    0.308503] mtrr: corrected configuration.
[    0.309104] bio: create slab <bio-0> at 0
[    0.309301] ACPI: Added _OSI(Module Device)
[    0.309302] ACPI: Added _OSI(Processor Device)
[    0.309304] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.309305] ACPI: Added _OSI(Processor Aggregator Device)
[    0.310776] ACPI: EC: Look up EC in DSDT
[    0.312641] ACPI: Executed 3 blocks of module-level executable AML code
[    0.467097] ACPI: Interpreter enabled
[    0.467110] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
[    0.467130] ACPI: (supports S0 S1 S3 S4 S5)
[    0.467132] ACPI: Using IOAPIC for interrupt routing
[    0.467158] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.468169] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.479073] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.479164] ACPI: No dock devices found.
[    0.613565] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.614025] PCI host bridge to bus 0000:00
[    0.614029] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.614031] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.614034] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.614036] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.614037] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.614039] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[    0.614041] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[    0.614052] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[    0.614170] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[    0.614206] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.614264] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.614303] pci 0000:00:04.0: [1002:597a] type 01 class 0x060400
[    0.614336] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.614392] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.614434] pci 0000:00:0a.0: [1002:597f] type 01 class 0x060400
[    0.614467] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.614523] pci 0000:00:0a.0: System wakeup disabled by ACPI
[    0.614571] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[    0.614589] pci 0000:00:11.0: reg 0x10: [io  0xc000-0xc007]
[    0.614599] pci 0000:00:11.0: reg 0x14: [io  0xb000-0xb003]
[    0.614608] pci 0000:00:11.0: reg 0x18: [io  0xa000-0xa007]
[    0.614617] pci 0000:00:11.0: reg 0x1c: [io  0x9000-0x9003]
[    0.614625] pci 0000:00:11.0: reg 0x20: [io  0x8000-0x800f]
[    0.614635] pci 0000:00:11.0: reg 0x24: [mem 0xfe9ffc00-0xfe9fffff]
[    0.614653] pci 0000:00:11.0: set SATA to AHCI mode
[    0.614767] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.614779] pci 0000:00:12.0: reg 0x10: [mem 0xfe9fe000-0xfe9fefff]
[    0.614882] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.614924] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.614941] pci 0000:00:12.2: reg 0x10: [mem 0xfe9ff800-0xfe9ff8ff]
[    0.615018] pci 0000:00:12.2: supports D1 D2
[    0.615020] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.615078] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.615121] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.615133] pci 0000:00:13.0: reg 0x10: [mem 0xfe9fd000-0xfe9fdfff]
[    0.615236] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.615279] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.615297] pci 0000:00:13.2: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff]
[    0.615373] pci 0000:00:13.2: supports D1 D2
[    0.615375] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.615433] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.615474] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.615617] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[    0.615630] pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
[    0.615639] pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
[    0.615648] pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
[    0.615657] pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
[    0.615666] pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
[    0.615768] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.615788] pci 0000:00:14.2: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
[    0.615850] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.615906] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.615941] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.616078] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.616160] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.616196] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.616209] pci 0000:00:14.5: reg 0x10: [mem 0xfe9fc000-0xfe9fcfff]
[    0.616311] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.616349] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.616362] pci 0000:00:16.0: reg 0x10: [mem 0xfe9f7000-0xfe9f7fff]
[    0.616464] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.616506] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.616524] pci 0000:00:16.2: reg 0x10: [mem 0xfe9ff000-0xfe9ff0ff]
[    0.616607] pci 0000:00:16.2: supports D1 D2
[    0.616609] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.616668] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.616709] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.616797] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.616879] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.616964] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.617050] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.617131] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.617266] pci 0000:01:00.0: [1002:6759] type 00 class 0x030000
[    0.617280] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.617292] pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeafffff 64bit]
[    0.617300] pci 0000:01:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.617313] pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
[    0.617348] pci 0000:01:00.0: supports D1 D2
[    0.617395] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[    0.617409] pci 0000:01:00.1: reg 0x10: [mem 0xfeabc000-0xfeabffff 64bit]
[    0.617473] pci 0000:01:00.1: supports D1 D2
[    0.626572] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.626577] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.626580] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.626583] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.626645] pci 0000:02:00.0: [1b21:1042] type 00 class 0x0c0330
[    0.626663] pci 0000:02:00.0: reg 0x10: [mem 0xfebf0000-0xfebf7fff 64bit]
[    0.626751] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.636560] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.636565] pci 0000:00:04.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.636624] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.636637] pci 0000:03:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.636658] pci 0000:03:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[    0.636671] pci 0000:03:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[    0.636727] pci 0000:03:00.0: supports D1 D2
[    0.636729] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.646553] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.646558] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.646562] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.646638] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.646647] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.646649] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.646651] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.646653] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.646654] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[    0.646656] pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[    0.646789] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[    0.646993] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
[    0.703863] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 14 15)
[    0.703946] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[    0.704032] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[    0.704116] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *10 11 14 15)
[    0.704186] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.704243] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.704299] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.704355] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.704584] ACPI: \_SB_.PCI0: notify handler is installed
[    0.704626] Found 1 acpi root devices
[    0.704728] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.704730] vgaarb: loaded
[    0.704731] vgaarb: bridge control possible 0000:01:00.0
[    0.704772] PCI: Using ACPI for IRQ routing
[    0.712546] PCI: pci_cache_line_size set to 64 bytes
[    0.712602] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[    0.712604] e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
[    0.712698] NetLabel: Initializing
[    0.712700] NetLabel:  domain hash size = 128
[    0.712701] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.712713] NetLabel:  unlabeled traffic allowed by default
[    0.712731] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.712735] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.714799] Switched to clocksource hpet
[    0.720729] pnp: PnP ACPI init
[    0.720745] ACPI: bus type PNP registered
[    0.791441] pnp 00:00: [dma 4]
[    0.791471] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.791508] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.791539] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.791570] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.791871] pnp 00:04: [dma 0 disabled]
[    0.791978] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.792076] system 00:05: [io  0x0290-0x029f] has been reserved
[    0.792080] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.792141] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.792409] pnp 00:07: [dma 0 disabled]
[    0.792489] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.792619] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.792622] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.792625] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.792898] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.792901] system 00:09: [io  0x040b] has been reserved
[    0.792903] system 00:09: [io  0x04d6] has been reserved
[    0.792905] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.792907] system 00:09: [io  0x0c14] has been reserved
[    0.792909] system 00:09: [io  0x0c50-0x0c51] has been reserved
[    0.792912] system 00:09: [io  0x0c52] has been reserved
[    0.792914] system 00:09: [io  0x0c6c] has been reserved
[    0.792916] system 00:09: [io  0x0c6f] has been reserved
[    0.792918] system 00:09: [io  0x0cd0-0x0cd1] has been reserved
[    0.792920] system 00:09: [io  0x0cd2-0x0cd3] has been reserved
[    0.792922] system 00:09: [io  0x0cd4-0x0cd5] has been reserved
[    0.792924] system 00:09: [io  0x0cd6-0x0cd7] has been reserved
[    0.792926] system 00:09: [io  0x0cd8-0x0cdf] has been reserved
[    0.792929] system 00:09: [io  0x0b00-0x0b3f] has been reserved
[    0.792931] system 00:09: [io  0x0800-0x089f] could not be reserved
[    0.792933] system 00:09: [io  0x0b00-0x0b1f] has been reserved
[    0.792936] system 00:09: [io  0x0b20-0x0b3f] has been reserved
[    0.792938] system 00:09: [io  0x0900-0x090f] has been reserved
[    0.792940] system 00:09: [io  0x0910-0x091f] has been reserved
[    0.792942] system 00:09: [io  0xfe00-0xfefe] has been reserved
[    0.792945] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.792947] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[    0.792949] system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.792952] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[    0.792955] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.793022] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.793025] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.793185] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.793188] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.793190] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.793192] system 00:0b: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.793195] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[    0.793197] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.793312] pnp: PnP ACPI: found 12 devices
[    0.793313] ACPI: bus type PNP unregistered
[    0.800123] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.800126] pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
[    0.800129] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.800132] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.800135] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.800139] pci 0000:00:04.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.800143] pci 0000:00:0a.0: PCI bridge to [bus 03]
[    0.800145] pci 0000:00:0a.0:   bridge window [io  0xe000-0xefff]
[    0.800149] pci 0000:00:0a.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.800152] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.800540] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.800542] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.800544] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.800546] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.800548] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.800550] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.800552] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.800553] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.800555] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.800557] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.800559] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.800561] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.800563] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.800565] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.800567] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.800569] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.800570] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
[    0.800572] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfebfffff]
[    0.800604] NET: Registered protocol family 2
[    0.800797] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.800940] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.801033] TCP: Hash tables configured (established 32768 bind 32768)
[    0.801060] TCP: reno registered
[    0.801068] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.801091] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.801167] NET: Registered protocol family 1
[    1.874072] pci 0000:01:00.0: Boot video device
[    1.874142] PCI: CLS 64 bytes, default 64
[    1.874182] Unpacking initramfs...
[    1.961973] Freeing initrd memory: 4852K (ffff880037676000 - ffff880037b33000)
[    1.962669] perf: AMD NB counters detected
[    1.962705] LVT offset 0 assigned for vector 0x400
[    1.962738] perf: AMD IBS detected (0x000000ff)
[    1.962760] Scanning for low memory corruption every 60 seconds
[    1.963063] audit: initializing netlink socket (disabled)
[    1.963072] type=2000 audit(1379942485.846:1): initialized
[    1.974098] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.975606] zbud: loaded
[    1.975746] VFS: Disk quotas dquot_6.5.2
[    1.975795] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.975985] msgmni has been set to 6525
[    1.976283] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.976341] io scheduler noop registered
[    1.976343] io scheduler deadline registered
[    1.976375] io scheduler cfq registered (default)
[    1.976468] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.976530] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[    1.976588] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[    1.976660] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[    1.976662] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    1.976664] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[    1.976666] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[    1.976679] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    1.976680] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.976683] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    1.976696] pcieport 0000:00:0a.0: Signaling PME through PCIe PME interrupt
[    1.976698] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.976701] pcie_pme 0000:00:0a.0:pcie01: service driver pcie_pme loaded
[    1.976716] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.976732] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.976795] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    1.976797] vesafb: scrolling: redraw
[    1.976798] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.977128] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010800000, using 5824k, total 5824k
[    2.006695] Console: switching to colour frame buffer device 175x65
[    2.036045] fb0: VESA VGA frame buffer device
[    2.036073] GHES: HEST is not enabled!
[    2.036134] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.056702] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    2.057085] Linux agpgart interface v0.103
[    2.057151] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.059601] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.059623] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.059769] mousedev: PS/2 mouse device common for all mice
[    2.059801] rtc_cmos 00:01: RTC can wake from S4
[    2.059930] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.059957] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.059971] cpuidle: using governor ladder
[    2.059973] cpuidle: using governor menu
[    2.060055] drop_monitor: Initializing network drop monitor service
[    2.060119] TCP: cubic registered
[    2.060239] NET: Registered protocol family 10
[    2.060435] NET: Registered protocol family 17
[    2.060443] Key type dns_resolver registered
[    2.060835] PM: Hibernation image not present or could not be loaded.
[    2.060847] registered taskstats version 1
[    2.061350]   Magic number: 13:946:382
[    2.061414] rtc_cmos 00:01: setting system clock to 2013-09-23 13:21:26 UTC (1379942486)
[    2.062422] Freeing unused kernel memory: 1140K (ffffffff818c8000 - ffffffff819e5000)
[    2.062423] Write protecting the kernel read-only data: 8192k
[    2.065623] Freeing unused kernel memory: 1088K (ffff8800014f0000 - ffff880001600000)
[    2.066617] Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
[    2.073799] systemd-udevd[75]: starting version 204
[    2.076110] [drm] Initialized drm 1.1.0 20060810
[    2.080887] [drm] radeon kernel modesetting enabled.
[    2.080940] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[    2.080942] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    2.080956] Console: switching to colour dummy device 80x25
[    2.081301] [drm] initializing kernel modesetting (TURKS 0x1002:0x6759 0x1787:0x2308).
[    2.081319] [drm] register mmio base: 0xFEAE0000
[    2.081320] [drm] register mmio size: 131072
[    2.081363] radeon 0000:01:00.0: Invalid ROM contents
[    2.082052] ATOM BIOS: TURKS
[    2.082188] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    2.082191] radeon 0000:01:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[    2.082192] [drm] Detected VRAM RAM=2048M, BAR=256M
[    2.082194] [drm] RAM width 128bits DDR
[    2.082256] [TTM] Zone  kernel: Available graphics memory: 1671782 kiB
[    2.082258] [TTM] Initializing pool allocator
[    2.082263] [TTM] Initializing DMA pool allocator
[    2.082284] [drm] radeon: 2048M of VRAM memory ready
[    2.082286] [drm] radeon: 512M of GTT memory ready.
[    2.082523] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.083072] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    2.116027] [drm] Loading TURKS Microcode
[    2.117490] [drm] PCIE GART of 512M enabled (table at 0x0000000000273000).
[    2.117593] radeon 0000:01:00.0: WB enabled
[    2.117596] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880037567c00
[    2.117599] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880037567c0c
[    2.119038] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90011132118
[    2.119040] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.119041] [drm] Driver supports precise vblank timestamp query.
[    2.119060] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[    2.119070] radeon 0000:01:00.0: radeon: using MSI.
[    2.119099] [drm] radeon: irq initialized.
[    2.135483] [drm] ring test on 0 succeeded in 2 usecs
[    2.135547] [drm] ring test on 3 succeeded in 1 usecs
[    2.322544] [drm] ring test on 5 succeeded in 1 usecs
[    2.322548] [drm] UVD initialized successfully.
[    2.322705] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.322754] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.474913] [drm] ib test on ring 5 succeeded
[    2.475327] [drm] Radeon Display Connectors
[    2.475329] [drm] Connector 0:
[    2.475330] [drm]   HDMI-A-1
[    2.475331] [drm]   HPD2
[    2.475333] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.475334] [drm]   Encoders:
[    2.475335] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.475336] [drm] Connector 1:
[    2.475337] [drm]   DVI-D-1
[    2.475338] [drm]   HPD1
[    2.475340] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    2.475341] [drm]   Encoders:
[    2.475342] [drm]     DFP2: INTERNAL_UNIPHY
[    2.475342] [drm] Connector 2:
[    2.475343] [drm]   VGA-1
[    2.475345] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.475346] [drm]   Encoders:
[    2.475347] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.475438] [drm] Internal thermal controller with fan control
[    2.476358] [drm] radeon: power management initialized
[    2.540420] [drm] fb mappable at 0xD0375000
[    2.540422] [drm] vram apper at 0xD0000000
[    2.540423] [drm] size 7299072
[    2.540425] [drm] fb depth is 24
[    2.540426] [drm]    pitch is 6912
[    2.540488] fbcon: radeondrmfb (fb0) is primary device
[    2.748500] Console: switching to colour frame buffer device 210x65
[    2.754057] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.754059] radeon 0000:01:00.0: registered panic notifier
[    2.754063] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
[    2.778055] SCSI subsystem initialized
[    2.778348] ACPI: bus type USB registered
[    2.778377] usbcore: registered new interface driver usbfs
[    2.778401] usbcore: registered new interface driver hub
[    2.778467] usbcore: registered new device driver usb
[    2.780171] ACPI: bus type ATA registered
[    2.780286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.780313] libata version 3.00 loaded.
[    2.780502] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.780510] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    2.780767] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.780792] ehci-pci: EHCI PCI platform driver
[    2.781289] ohci-pci: OHCI PCI platform driver
[    2.784919] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.784929] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[    2.784937] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[    2.784946] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[    2.784954] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[    2.784962] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[    2.784970] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[    2.784978] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
[    2.785276] xHCI xhci_add_endpoint called for root hub
[    2.785278] xHCI xhci_check_bandwidth called for root hub
[    2.785341] hub 1-0:1.0: USB hub found
[    2.785347] hub 1-0:1.0: 2 ports detected
[    2.785544] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    2.785549] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    2.785561] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.785706] xHCI xhci_add_endpoint called for root hub
[    2.785708] xHCI xhci_check_bandwidth called for root hub
[    2.785733] hub 2-0:1.0: USB hub found
[    2.785739] hub 2-0:1.0: 2 ports detected
[    2.785908] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[    2.785921] QUIRK: Enable AMD PLL fix
[    2.785923] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.785937] ehci-pci 0000:00:12.2: debug port 1
[    2.785978] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe9ff800
[    2.792778] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.792915] hub 3-0:1.0: USB hub found
[    2.792920] hub 3-0:1.0: 5 ports detected
[    2.793194] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.793199] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    2.793203] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.793214] ehci-pci 0000:00:13.2: debug port 1
[    2.793236] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe9ff400
[    2.802787] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.802935] hub 4-0:1.0: USB hub found
[    2.802941] hub 4-0:1.0: 5 ports detected
[    2.803226] ehci-pci 0000:00:16.2: EHCI Host Controller
[    2.803231] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[    2.803235] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.803246] ehci-pci 0000:00:16.2: debug port 1
[    2.803269] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe9ff000
[    2.812760] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.812936] hub 5-0:1.0: USB hub found
[    2.812942] hub 5-0:1.0: 4 ports detected
[    2.813217] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.813224] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[    2.813250] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe9fe000
[    2.870172] hub 6-0:1.0: USB hub found
[    2.870179] hub 6-0:1.0: 5 ports detected
[    2.870433] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.870439] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[    2.870453] ohci-pci 0000:00:13.0: irq 18, io mem 0xfe9fd000
[    2.926780] hub 7-0:1.0: USB hub found
[    2.926787] hub 7-0:1.0: 5 ports detected
[    2.927039] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.927045] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[    2.927058] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe9fc000
[    2.962605] tsc: Refined TSC clocksource calibration: 3099.972 MHz
[    2.983388] hub 8-0:1.0: USB hub found
[    2.983394] hub 8-0:1.0: 2 ports detected
[    2.983612] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    2.983617] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[    2.983630] ohci-pci 0000:00:16.0: irq 18, io mem 0xfe9f7000
[    3.040006] hub 9-0:1.0: USB hub found
[    3.040014] hub 9-0:1.0: 4 ports detected
[    3.040123] ahci 0000:00:11.0: version 3.0
[    3.040362] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    3.040366] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    3.041640] scsi0 : ahci
[    3.041732] scsi1 : ahci
[    3.041812] scsi2 : ahci
[    3.041889] scsi3 : ahci
[    3.041957] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 19
[    3.041960] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 19
[    3.041962] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 19
[    3.041964] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 19
[    3.142424] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[    3.180770] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.180776] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.183465] hidraw: raw HID events driver (C) Jiri Kosina
[    3.208572] usbcore: registered new interface driver usbhid
[    3.208574] usbhid: USB HID core driver
[    3.209128] input:   USB Keyboard as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-1/1-1:1.0/input/input0
[    3.209192] hid-generic 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:02:00.0-1/input0
[    3.212419] input:   USB Keyboard as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-1/1-1:1.1/input/input1
[    3.212489] hid-generic 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:02:00.0-1/input1
[    3.342228] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[    3.358915] ata3: SATA link down (SStatus 0 SControl 300)
[    3.358997] ata4: SATA link down (SStatus 0 SControl 300)
[    3.362818] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.365754] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb1/1-2/1-2:1.0/input/input2
[    3.365857] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-2/input0
[    3.472099] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    3.525391] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.525423] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.537199] ata2.00: ATA-8: OCZ-VERTEX2, 1.27, max UDMA/133
[    3.537202] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.537499] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
[    3.537502] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.547198] ata2.00: configured for UDMA/133
[    3.547366] ata1.00: configured for UDMA/133
[    3.547506] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX3      2.15 PQ: 0 ANSI: 5
[    3.547722] scsi 1:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.27 PQ: 0 ANSI: 5
[    3.549805] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    3.549858] sd 0:0:0:0: [sda] Write Protect is off
[    3.549861] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.549878] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.549887] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    3.549940] sd 1:0:0:0: [sdb] Write Protect is off
[    3.549942] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.549959] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.550287]  sda: sda1
[    3.550419]  sdb: sdb1
[    3.550546] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.550652] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.748299] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.798979] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.799441] systemd[1]: Set hostname to <apexlinux>.
[    3.832878] systemd[1]: Cannot add dependency job for unit catalyst-hook.service, ignoring: Unit catalyst-hook.service failed to load: No such file or directory. See system logs and 'systemctl status catalyst-hook.service' for details.
[    3.833053] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    3.833107] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.833120] systemd[1]: Starting Remote File Systems.
[    3.833132] systemd[1]: Reached target Remote File Systems.
[    3.833142] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[    3.833153] systemd[1]: Starting LVM2 metadata daemon socket.
[    3.833185] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.833195] systemd[1]: Starting Delayed Shutdown Socket.
[    3.833216] systemd[1]: Listening on Delayed Shutdown Socket.
[    3.833225] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    3.833254] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.833263] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    3.833283] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.833292] systemd[1]: Starting Encrypted Volumes.
[    3.833303] systemd[1]: Reached target Encrypted Volumes.
[    3.833353] systemd[1]: Starting udev Kernel Socket.
[    3.833374] systemd[1]: Listening on udev Kernel Socket.
[    3.833416] systemd[1]: Starting udev Control Socket.
[    3.833439] systemd[1]: Listening on udev Control Socket.
[    3.833450] systemd[1]: Starting Journal Socket.
[    3.833500] systemd[1]: Listening on Journal Socket.
[    3.834167] systemd[1]: Started Load Kernel Modules.
[    3.834216] systemd[1]: Starting udev Coldplug all Devices...
[    3.834735] systemd[1]: Mounting Huge Pages File System...
[    3.835636] systemd[1]: Starting Apply Kernel Variables...
[    3.836152] systemd[1]: Mounting POSIX Message Queue File System...
[    3.836593] systemd[1]: Mounted FUSE Control File System.
[    3.836613] systemd[1]: Mounting Configuration File System...
[    3.837085] systemd[1]: Starting Create static device nodes in /dev...
[    3.837619] systemd[1]: Starting Setup Virtual Console...
[    3.838089] systemd[1]: Starting Journal Service...
[    3.838573] systemd[1]: Started Journal Service.
[    3.838610] systemd[1]: Mounting Debug File System...
[    3.839049] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    3.839152] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.840178] systemd[1]: Started Set Up Additional Binary Formats.
[    3.840202] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    3.840247] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.840259] systemd[1]: Starting Paths.
[    3.840271] systemd[1]: Reached target Paths.
[    3.840280] systemd[1]: Starting Swap.
[    3.840291] systemd[1]: Reached target Swap.
[    3.840305] systemd[1]: Started File System Check on Root Device.
[    3.840316] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.840836] systemd[1]: Mounting Temporary Directory...
[    3.843080] systemd[1]: Started Apply Kernel Variables.
[    3.843400] systemd[1]: Started Setup Virtual Console.
[    3.849180] EXT4-fs (sda1): re-mounted. Opts: discard
[    3.857913] systemd-udevd[175]: starting version 204
[    3.904723] systemd-journald[156]: File /var/log/journal/7c5011b41032410aa75a26a675f0c785/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    3.958841] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[    3.958846] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    3.958850] ACPI: Power Button [PWRB]
[    3.958902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    3.958905] ACPI: Power Button [PWRF]
[    3.959300] ACPI: acpi_idle registered with cpuidle
[    3.960262] MCE: In-kernel MCE decoding enabled.
[    3.961730] Switched to clocksource tsc
[    3.962870] wmi: Mapper loaded
[    3.964214] EDAC MC: Ver: 3.0.0
[    3.966953] AMD64 EDAC driver v3.4.0
[    3.967099] scsi4 : pata_atiixp
[    3.967619] scsi5 : pata_atiixp
[    3.970303] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    3.970306] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    3.971172] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.972426] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20130517/utaddress-251)
[    3.972433] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 2 (20130517/utaddress-251)
[    3.972438] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.974100] EDAC amd64: DRAM ECC disabled.
[    3.974114] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[    3.976276] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[    3.976490] sp5100_tco: PCI Revision ID: 0x42
[    3.976530] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[    3.976542] sp5100_tco: Last reboot was not triggered by watchdog.
[    3.976640] sp5100_tco: initialized (0xffffc9001282ab00). heartbeat=60 sec (nowayout=0)
[    4.008618] parport_pc 00:04: reported by Plug and Play ACPI
[    4.008677] parport0: PC-style at 0x378, irq 7 [PCSPP]
[    4.015824] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    4.016045] r8169 0000:03:00.0: irq 52 for MSI/MSI-X
[    4.016243] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90012954000, f4:6d:04:ce:5d:e6, XID 0c900800 IRQ 52
[    4.016246] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.026100] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    4.047340] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    4.051632] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    4.053156] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    4.055178] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    4.055238] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    4.057607] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    4.057652] snd_hda_intel 0000:01:00.1: irq 53 for MSI/MSI-X
[    4.065998] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[    4.081147] media: Linux media interface: v0.10
[    4.088437] Linux video capture interface: v2.00
[    4.105418] ppdev: user-space parallel port driver
[    4.122668] 2:3:1: cannot get freq at ep 0x84
[    4.138338] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[    4.138345] usb_audio: [2] FU [Mic Capture Volume] ch = 2, val = 4608/7936/1
[    4.138898] uvcvideo: Found UVC 1.00 device VF0490 Live Cam Notebook Ultra (041e:4072)
[    4.139091] usbcore: registered new interface driver snd-usb-audio
[    4.140126] r8169 0000:03:00.0 eth0: link down
[    4.140159] r8169 0000:03:00.0 eth0: link down
[    4.140169] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.148824] input: VF0490 Live Cam Notebook Ultra as /devices/pci0000:00/0000:00:12.2/usb3/3-1/3-1:1.0/input/input12
[    4.148993] usbcore: registered new interface driver uvcvideo
[    4.148998] USB Video Class driver (1.1.1)
[    4.184809] ata5.01: ATA-7: ST3160212SCE, 3.ACF, max UDMA/133
[    4.184819] ata5.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.184831] ata5.01: limited to UDMA/33 due to 40-wire cable
[    4.251440] ata5.01: configured for UDMA/33
[    4.251746] scsi 4:0:1:0: Direct-Access     ATA      ST3160212SCE     3.AC PQ: 0 ANSI: 5
[    4.252049] sd 4:0:1:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    4.252266] sd 4:0:1:0: [sdc] Write Protect is off
[    4.252274] sd 4:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[    4.252347] sd 4:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.307720]  sdc: sdc1
[    4.308457] sd 4:0:1:0: [sdc] Attached SCSI disk
[    5.715213] r8169 0000:03:00.0 eth0: link up
[    5.715240] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.758358] 2:3:1: cannot get freq at ep 0x84
[   10.781455] 2:3:1: cannot get freq at ep 0x84
[   10.820537] 2:3:1: cannot get freq at ep 0x84
[   10.843634] 2:3:1: cannot get freq at ep 0x84
[   10.876597] 2:3:1: cannot get freq at ep 0x84
[   10.899700] 2:3:1: cannot get freq at ep 0x84
[   10.934279] systemd-journald[156]: File /var/log/journal/7c5011b41032410aa75a26a675f0c785/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   12.881430] EXT4-fs (sda1): re-mounted. Opts: discard,commit=0
[   94.566224] device-mapper: uevent: version 1.0.3
[   94.566457] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com

Offline

#27 2013-09-23 14:33:36

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

i see 2 acpi warning SystemIO conflicts

Offline

#28 2013-09-23 14:38:37

graysky
Member
From: /run/user/1000
Registered: 2008-12-01
Posts: 8,614
Website

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

apex wrote:

i see 2 acpi warning SystemIO conflicts

Harmelsss I think... my machine has a very similar warning:

[    0.589123] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[    2.801761] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
[    2.801766] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    2.801768] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
[    2.801770] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
[    2.801771] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.LPCB.GPBX 2 (20130517/utaddress-251)
[    2.801773] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.801868] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130517/utaddress-251)

No problems with cores missing:

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                8
On-line CPU(s) list:   0-7
Thread(s) per core:    2
Core(s) per socket:    4
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 58
Model name:            Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
Stepping:              9
CPU MHz:               4480.000
BogoMIPS:              7002.55
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              8192K
NUMA node0 CPU(s):     0-7

Last edited by graysky (2013-09-23 14:39:54)


CPU-optimized Linux-ck packages @ Repo-ck  • AUR packagesZsh and other configs

Offline

#29 2013-09-23 15:05:13

ilsensine
Member
Registered: 2013-03-26
Posts: 25

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

apex wrote:

Wow, that is gonna be a huge post

(Doh, I thougth it was possible to attach files in this forum...)

Anyway, I don't see suspicious messages in your log.
The warnings you see are harmless, as graysky noted.

So, to summarize:

- The mem= option has no effect.
- Increasing the number of active cores, increases the problem.
- It happens on both radeon & catalyst.
- The AMD turbo mode is fatal
- The "crash" is actually an "instantaneus reboot", so a triple fault

I'm starting to suspect also some sort of hw problem, but I assume you have windows installed, an windows doesn't show any problem -- right?
(just for sure, I'd give a memtest run anyway)

Offline

#30 2013-09-23 15:24:22

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

ilsensine wrote:
apex wrote:

Wow, that is gonna be a huge post

(Doh, I thougth it was possible to attach files in this forum...)

Anyway, I don't see suspicious messages in your log.
The warnings you see are harmless, as graysky noted.

So, to summarize:

- The mem= option has no effect.
- Increasing the number of active cores, increases the problem.
- It happens on both radeon & catalyst.
- The AMD turbo mode is fatal
- The "crash" is actually an "instantaneus reboot", so a triple fault

I'm starting to suspect also some sort of hw problem, but I assume you have windows installed, an windows doesn't show any problem -- right?
(just for sure, I'd give a memtest run anyway)

Your summary is correct, memtest shows no problem.

Offline

#31 2013-09-23 15:33:40

ilsensine
Member
Registered: 2013-03-26
Posts: 25

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

I missed this one:

[    2.081363] radeon 0000:01:00.0: Invalid ROM contents

I can't tell if it is related, never seen this message before.

Offline

#32 2013-09-23 15:40:02

ilsensine
Member
Registered: 2013-03-26
Posts: 25

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

apex wrote:

Your summary is correct, memtest shows no problem.

Can you verify if cpu intensive tasks have problems? (you can use the cpuburn utility)

Offline

#33 2013-09-23 16:34:59

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

When i run virtual machines, uses up cpu cores just fine, lscu jumps up from 1400mhz to 3100mhz  so I assume throttling and heavy use is fine.
Virtual machines run without problems and main machine does not even hiccup.

Offline

#34 2013-09-23 16:50:02

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

I have been using asus for years as well, always loved them but they are not friendly on the phone or on support chat if you mention linux, immediatly they want to get rid of you.

Just got off the phone with Asus, they sell laptops with linux and claim to have the worlds best selling boards, you would think they would support them in the linux world. The support guys I talked to said they had 4 guys there for linux and only support basic things like wi-fi because to use their words "our support team has a very limited knowledge of linux." Unbelievable!

For goodness sake, linux is the most used os on the planet but they guy said "becuase it is a free operating system, we don't support it, linux don't even support linux. It's just not used that much." I told him hogwash, linux is the most widly use os on the planet, even in your microwave oven and has the largest helpful support groups around, (this forum is one of them). He had no reply other than linux may not be compatible, he has no way of knowing and nobody else there would either.

There has to be a way around this, I just can't believe a motherboard company with such a good history is not compatible with linux.

Offline

#35 2013-09-23 16:58:52

ilsensine
Member
Registered: 2013-03-26
Posts: 25

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

apex, I think the only short-term solution at this point is to run with KMS disabled:
radeon.modeset=0
As side effect, you'll loose any sort of video acceleration.
Let me know if this helps for now.

Last edited by ilsensine (2013-09-23 17:00:32)

Offline

#36 2013-09-23 17:21:52

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

put radeon.modeset=0 in grub.
system starts to load then just before kdm loads, just blinking curser, have to ctl alt f1 to login terminal then reset grub and restart.

Offline

#37 2013-09-23 17:31:24

ilsensine
Member
Registered: 2013-03-26
Posts: 25

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

Check if xf86-video-vesa is installed

Offline

#38 2013-09-23 17:55:08

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

Yes, it is installed.

Offline

#39 2013-09-23 18:42:00

ilsensine
Member
Registered: 2013-03-26
Posts: 25

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

That's strange. I checked on my system before giving you the advice; the vesa driver is used if KMS is disabled... hmm

Offline

#40 2013-09-23 18:50:08

KairiTech
Member
From: Toronto, Canada
Registered: 2011-06-04
Posts: 231

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

When compiling or doing cpu intensive work I discovered arch is not using all the cpu cores.

I've had this happen to my ASUS M5A99X EVO and it turned out that I had somehow set the BIOS Ai Tweaker > Ai Overclock Tuner flag incorrectly to Manual instead of Automatic while the TPU switch was in the Enable position.


-=[ LIVE enabled UEFI with redundant syslinux pure systemd detached LUKS header partitionless encrypted GPT SSDx3 RAID0 because I can.  ]=-

Backward compatibility is for the masses. There's no dual-boot here...

Offline

#41 2013-09-23 23:11:41

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

ilsensine, what does that imply other than my vesa driver does not work?

KairiTech, thanks for the post.


UPDATE - Shutting off 4 of the 8 cores via bios does same good performance as shutting of via grub.


Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    2
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             AuthenticAMD
CPU family:            21
Model:                 1
Model name:            AMD FX(tm)-8120 Eight-Core Processor
Stepping:              2
CPU MHz:               1400.000
BogoMIPS:              6202.86
Virtualization:        AMD-V
L1d cache:             16K
L1i cache:             64K
L2 cache:              2048K
L3 cache:              8192K
NUMA node0 CPU(s):     0-3

Spoke with my hardware vendor, suggestion was to try a better power supply.
I seen odd problems before with quirky supplies so I can't argue with him till I try it.

Offline

#42 2013-09-24 06:25:46

ilsensine
Member
Registered: 2013-03-26
Posts: 25

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

apex wrote:

ilsensine, what does that imply other than my vesa driver does not work?

Don't know for sure. Maybe you have some X configuration file explicitly setting the video driver. Check /etc/X11/xorg.conf or the files in /etc/X11/xorg.conf.d. Also the X logfile (/var/log/X.0.log for the current boot, /var/log/X.0.log.old for the last boot) could give you some clue on the reason why the vesa driver doesn't take over.
For example on my PC I observe the following when started with modeset=0:

(various messages from Radeon driver...)
(II) [KMS] drm report modesetting isn't supported.
(...)
(II) UnloadModule: "radeon"
(...)
(II) VESA(0): initializing int10
(...)
(II) VESA(0): Setting up VESA Mode 0x123 (1024x768)

Spoke with my hardware vendor, suggestion was to try a better power supply.

It could be. But if it is the case, you should also observe random misbehaviour with other workloads exercising the video engine, or also under windows (if you have windows installed).

Last edited by ilsensine (2013-09-24 06:31:20)

Offline

#43 2013-09-24 07:44:30

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

ilsensine,
Thanks will check the logs, since this is a video problem and not just cpu, great idea.

Windows? That is a four letter word in my camp!
Seriously though, yes had windows on this box long time ago, worked fine with video.
Going to try and run some analysis software on the hardware and see if anything else pops up.

Offline

#44 2013-10-01 21:41:00

apex
Member
Registered: 2013-09-22
Posts: 29

Re: CPU Cores missing on lscpu - SOLVED get better power supply.

Installed new more powerful power supply, system runs smooth.
Can run multiple video / flash   in dual screens simultanously with no problems.

Lesson RE-learned:
Make sure your hardware meets specs., the radeon standard specs are provided with at least 550 watts.

This is embarrassing, should have known better, my apologies for wasting people's time here. When I had my computer repair shops, this is one of the first things I would check.  Had a rolls royce vehicle with a motorcycle gas tank, like that makes sense.  That being said, learn the lesson I failed to remember and save yourself some trouble.

ISSUE SOLVED

Offline

Board footer

Powered by FluxBB