Arch Linux

Kotrfa

Member

Registered: 2012-10-25

Posts: 213

Long time of a connection

Hello,

I'would like to speed up estabilishing my connection, after I boot or wake up my laptop. Now it takes about ~20 sec. Here is dmesg after waking laptop up (only relevant parts):

[ 1246.472150] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 1246.478934] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 1246.894255] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 1246.894153] Restarting tasks ... done.
[ 1246.900150] video LNXVIDEO:00: Restoring backlight state
[ 1247.395322] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 1247.402086] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 1247.471178] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1247.491618] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 1248.076111] r8169 0000:02:00.0 enp2s0: link down
[ 1248.076162] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1252.145093] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 1252.151899] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 1252.243743] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 1255.552409] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 1255.559196] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 1255.648784] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 1255.870699] r8169 0000:02:00.0 enp2s0: link down
[ 1255.870756] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 1255.928204] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
[ 1255.935020] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
[ 1256.028324] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 1258.140809] wlp1s0: authenticate with c8:d1:5e:ad:00:e4
[ 1258.144292] wlp1s0: send auth to c8:d1:5e:ad:00:e4 (try 1/3)
[ 1258.145926] wlp1s0: authenticated
[ 1258.146955] wlp1s0: associate with c8:d1:5e:ad:00:e4 (try 1/3)
[ 1258.149223] wlp1s0: RX AssocResp from c8:d1:5e:ad:00:e4 (capab=0x411 status=0 aid=1)
[ 1258.153005] wlp1s0: associated
[ 1258.153051] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready

I guess that is is because of IPv6, so I tried to disable it booting with "ipv6.disable=1" parametr on kernel line, but nothing changed. Thank you